spi: efm32: Convert to use GPIO descriptors
[linux/fpc-iii.git] / arch / ia64 / include / asm / mca_asm.h
blobe3ab1f41f1c3cf3488c19637f88167e741b1e54a
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3 * File: mca_asm.h
4 * Purpose: Machine check handling specific defines
6 * Copyright (C) 1999 Silicon Graphics, Inc.
7 * Copyright (C) Vijay Chander <vijay@engr.sgi.com>
8 * Copyright (C) Srinivasa Thirumalachar <sprasad@engr.sgi.com>
9 * Copyright (C) 2000 Hewlett-Packard Co.
10 * Copyright (C) 2000 David Mosberger-Tang <davidm@hpl.hp.com>
11 * Copyright (C) 2002 Intel Corp.
12 * Copyright (C) 2002 Jenna Hall <jenna.s.hall@intel.com>
13 * Copyright (C) 2005 Silicon Graphics, Inc
14 * Copyright (C) 2005 Keith Owens <kaos@sgi.com>
16 #ifndef _ASM_IA64_MCA_ASM_H
17 #define _ASM_IA64_MCA_ASM_H
19 #include <asm/percpu.h>
21 #define PSR_IC 13
22 #define PSR_I 14
23 #define PSR_DT 17
24 #define PSR_RT 27
25 #define PSR_MC 35
26 #define PSR_IT 36
27 #define PSR_BN 44
30 * This macro converts a instruction virtual address to a physical address
31 * Right now for simulation purposes the virtual addresses are
32 * direct mapped to physical addresses.
33 * 1. Lop off bits 61 thru 63 in the virtual address
35 #define INST_VA_TO_PA(addr) \
36 dep addr = 0, addr, 61, 3
38 * This macro converts a data virtual address to a physical address
39 * Right now for simulation purposes the virtual addresses are
40 * direct mapped to physical addresses.
41 * 1. Lop off bits 61 thru 63 in the virtual address
43 #define DATA_VA_TO_PA(addr) \
44 tpa addr = addr
46 * This macro converts a data physical address to a virtual address
47 * Right now for simulation purposes the virtual addresses are
48 * direct mapped to physical addresses.
49 * 1. Put 0x7 in bits 61 thru 63.
51 #define DATA_PA_TO_VA(addr,temp) \
52 mov temp = 0x7 ;; \
53 dep addr = temp, addr, 61, 3
55 #define GET_THIS_PADDR(reg, var) \
56 mov reg = IA64_KR(PER_CPU_DATA);; \
57 addl reg = THIS_CPU(var), reg
60 * This macro jumps to the instruction at the given virtual address
61 * and starts execution in physical mode with all the address
62 * translations turned off.
63 * 1. Save the current psr
64 * 2. Make sure that all the upper 32 bits are off
66 * 3. Clear the interrupt enable and interrupt state collection bits
67 * in the psr before updating the ipsr and iip.
69 * 4. Turn off the instruction, data and rse translation bits of the psr
70 * and store the new value into ipsr
71 * Also make sure that the interrupts are disabled.
72 * Ensure that we are in little endian mode.
73 * [psr.{rt, it, dt, i, be} = 0]
75 * 5. Get the physical address corresponding to the virtual address
76 * of the next instruction bundle and put it in iip.
77 * (Using magic numbers 24 and 40 in the deposint instruction since
78 * the IA64_SDK code directly maps to lower 24bits as physical address
79 * from a virtual address).
81 * 6. Do an rfi to move the values from ipsr to psr and iip to ip.
83 #define PHYSICAL_MODE_ENTER(temp1, temp2, start_addr, old_psr) \
84 mov old_psr = psr; \
85 ;; \
86 dep old_psr = 0, old_psr, 32, 32; \
88 mov ar.rsc = 0 ; \
89 ;; \
90 srlz.d; \
91 mov temp2 = ar.bspstore; \
92 ;; \
93 DATA_VA_TO_PA(temp2); \
94 ;; \
95 mov temp1 = ar.rnat; \
96 ;; \
97 mov ar.bspstore = temp2; \
98 ;; \
99 mov ar.rnat = temp1; \
100 mov temp1 = psr; \
101 mov temp2 = psr; \
102 ;; \
104 dep temp2 = 0, temp2, PSR_IC, 2; \
105 ;; \
106 mov psr.l = temp2; \
107 ;; \
108 srlz.d; \
109 dep temp1 = 0, temp1, 32, 32; \
110 ;; \
111 dep temp1 = 0, temp1, PSR_IT, 1; \
112 ;; \
113 dep temp1 = 0, temp1, PSR_DT, 1; \
114 ;; \
115 dep temp1 = 0, temp1, PSR_RT, 1; \
116 ;; \
117 dep temp1 = 0, temp1, PSR_I, 1; \
118 ;; \
119 dep temp1 = 0, temp1, PSR_IC, 1; \
120 ;; \
121 dep temp1 = -1, temp1, PSR_MC, 1; \
122 ;; \
123 mov cr.ipsr = temp1; \
124 ;; \
125 LOAD_PHYSICAL(p0, temp2, start_addr); \
126 ;; \
127 mov cr.iip = temp2; \
128 mov cr.ifs = r0; \
129 DATA_VA_TO_PA(sp); \
130 DATA_VA_TO_PA(gp); \
131 ;; \
132 srlz.i; \
133 ;; \
134 nop 1; \
135 nop 2; \
136 nop 1; \
137 nop 2; \
138 rfi; \
142 * This macro jumps to the instruction at the given virtual address
143 * and starts execution in virtual mode with all the address
144 * translations turned on.
145 * 1. Get the old saved psr
147 * 2. Clear the interrupt state collection bit in the current psr.
149 * 3. Set the instruction translation bit back in the old psr
150 * Note we have to do this since we are right now saving only the
151 * lower 32-bits of old psr.(Also the old psr has the data and
152 * rse translation bits on)
154 * 4. Set ipsr to this old_psr with "it" bit set and "bn" = 1.
156 * 5. Reset the current thread pointer (r13).
158 * 6. Set iip to the virtual address of the next instruction bundle.
160 * 7. Do an rfi to move ipsr to psr and iip to ip.
163 #define VIRTUAL_MODE_ENTER(temp1, temp2, start_addr, old_psr) \
164 mov temp2 = psr; \
165 ;; \
166 mov old_psr = temp2; \
167 ;; \
168 dep temp2 = 0, temp2, PSR_IC, 2; \
169 ;; \
170 mov psr.l = temp2; \
171 mov ar.rsc = 0; \
172 ;; \
173 srlz.d; \
174 mov r13 = ar.k6; \
175 mov temp2 = ar.bspstore; \
176 ;; \
177 DATA_PA_TO_VA(temp2,temp1); \
178 ;; \
179 mov temp1 = ar.rnat; \
180 ;; \
181 mov ar.bspstore = temp2; \
182 ;; \
183 mov ar.rnat = temp1; \
184 ;; \
185 mov temp1 = old_psr; \
186 ;; \
187 mov temp2 = 1; \
188 ;; \
189 dep temp1 = temp2, temp1, PSR_IC, 1; \
190 ;; \
191 dep temp1 = temp2, temp1, PSR_IT, 1; \
192 ;; \
193 dep temp1 = temp2, temp1, PSR_DT, 1; \
194 ;; \
195 dep temp1 = temp2, temp1, PSR_RT, 1; \
196 ;; \
197 dep temp1 = temp2, temp1, PSR_BN, 1; \
198 ;; \
200 mov cr.ipsr = temp1; \
201 movl temp2 = start_addr; \
202 ;; \
203 mov cr.iip = temp2; \
204 movl gp = __gp \
205 ;; \
206 DATA_PA_TO_VA(sp, temp1); \
207 srlz.i; \
208 ;; \
209 nop 1; \
210 nop 2; \
211 nop 1; \
212 rfi \
216 * The MCA and INIT stacks in struct ia64_mca_cpu look like normal kernel
217 * stacks, except that the SAL/OS state and a switch_stack are stored near the
218 * top of the MCA/INIT stack. To support concurrent entry to MCA or INIT, as
219 * well as MCA over INIT, each event needs its own SAL/OS state. All entries
220 * are 16 byte aligned.
222 * +---------------------------+
223 * | pt_regs |
224 * +---------------------------+
225 * | switch_stack |
226 * +---------------------------+
227 * | SAL/OS state |
228 * +---------------------------+
229 * | 16 byte scratch area |
230 * +---------------------------+ <-------- SP at start of C MCA handler
231 * | ..... |
232 * +---------------------------+
233 * | RBS for MCA/INIT handler |
234 * +---------------------------+
235 * | struct task for MCA/INIT |
236 * +---------------------------+ <-------- Bottom of MCA/INIT stack
239 #define ALIGN16(x) ((x)&~15)
240 #define MCA_PT_REGS_OFFSET ALIGN16(KERNEL_STACK_SIZE-IA64_PT_REGS_SIZE)
241 #define MCA_SWITCH_STACK_OFFSET ALIGN16(MCA_PT_REGS_OFFSET-IA64_SWITCH_STACK_SIZE)
242 #define MCA_SOS_OFFSET ALIGN16(MCA_SWITCH_STACK_OFFSET-IA64_SAL_OS_STATE_SIZE)
243 #define MCA_SP_OFFSET ALIGN16(MCA_SOS_OFFSET-16)
245 #endif /* _ASM_IA64_MCA_ASM_H */