drivers/ata/pata_ftide010.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Faraday Technology FTIDE010 driver
   4  * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
   5  *
   6  * Includes portions of the SL2312/SL3516/Gemini PATA driver
   7  * Copyright (C) 2003 StorLine, Inc <jason@storlink.com.tw>
   8  * Copyright (C) 2009 Janos Laube <janos.dev@gmail.com>
   9  * Copyright (C) 2010 Frederic Pecourt <opengemini@free.fr>
  10  * Copyright (C) 2011 Tobias Waldvogel <tobias.waldvogel@gmail.com>
  11  */
  12
  13 #include <linux/platform_device.h>
  14 #include <linux/module.h>
  15 #include <linux/libata.h>
  16 #include <linux/bitops.h>
  17 #include <linux/of_address.h>
  18 #include <linux/of_device.h>
  19 #include <linux/clk.h>
  20 #include "sata_gemini.h"
  21
  22 #define DRV_NAME "pata_ftide010"
  23
  24 /**
  25  * struct ftide010 - state container for the Faraday FTIDE010
  26  * @dev: pointer back to the device representing this controller
  27  * @base: remapped I/O space address
  28  * @pclk: peripheral clock for the IDE block
  29  * @host: pointer to the ATA host for this device
  30  * @master_cbl: master cable type
  31  * @slave_cbl: slave cable type
  32  * @sg: Gemini SATA bridge pointer, if running on the Gemini
  33  * @master_to_sata0: Gemini SATA bridge: the ATA master is connected
  34  * to the SATA0 bridge
  35  * @slave_to_sata0: Gemini SATA bridge: the ATA slave is connected
  36  * to the SATA0 bridge
  37  * @master_to_sata1: Gemini SATA bridge: the ATA master is connected
  38  * to the SATA1 bridge
  39  * @slave_to_sata1: Gemini SATA bridge: the ATA slave is connected
  40  * to the SATA1 bridge
  41  */
  42 struct ftide010 {
  43         struct device *dev;
  44         void __iomem *base;
  45         struct clk *pclk;
  46         struct ata_host *host;
  47         unsigned int master_cbl;
  48         unsigned int slave_cbl;
  49         /* Gemini-specific properties */
  50         struct sata_gemini *sg;
  51         bool master_to_sata0;
  52         bool slave_to_sata0;
  53         bool master_to_sata1;
  54         bool slave_to_sata1;
  55 };
  56
  57 #define FTIDE010_DMA_REG        0x00
  58 #define FTIDE010_DMA_STATUS     0x02
  59 #define FTIDE010_IDE_BMDTPR     0x04
  60 #define FTIDE010_IDE_DEVICE_ID  0x08
  61 #define FTIDE010_PIO_TIMING     0x10
  62 #define FTIDE010_MWDMA_TIMING   0x11
  63 #define FTIDE010_UDMA_TIMING0   0x12 /* Master */
  64 #define FTIDE010_UDMA_TIMING1   0x13 /* Slave */
  65 #define FTIDE010_CLK_MOD        0x14
  66 /* These registers are mapped directly to the IDE registers */
  67 #define FTIDE010_CMD_DATA       0x20
  68 #define FTIDE010_ERROR_FEATURES 0x21
  69 #define FTIDE010_NSECT          0x22
  70 #define FTIDE010_LBAL           0x23
  71 #define FTIDE010_LBAM           0x24
  72 #define FTIDE010_LBAH           0x25
  73 #define FTIDE010_DEVICE         0x26
  74 #define FTIDE010_STATUS_COMMAND 0x27
  75 #define FTIDE010_ALTSTAT_CTRL   0x36
  76
  77 /* Set this bit for UDMA mode 5 and 6 */
  78 #define FTIDE010_UDMA_TIMING_MODE_56    BIT(7)
  79
  80 /* 0 = 50 MHz, 1 = 66 MHz */
  81 #define FTIDE010_CLK_MOD_DEV0_CLK_SEL   BIT(0)
  82 #define FTIDE010_CLK_MOD_DEV1_CLK_SEL   BIT(1)
  83 /* Enable UDMA on a device */
  84 #define FTIDE010_CLK_MOD_DEV0_UDMA_EN   BIT(4)
  85 #define FTIDE010_CLK_MOD_DEV1_UDMA_EN   BIT(5)
  86
  87 static struct scsi_host_template pata_ftide010_sht = {
  88         ATA_BMDMA_SHT(DRV_NAME),
  89 };
  90
  91 /*
  92  * Bus timings
  93  *
  94  * The unit of the below required timings is two clock periods of the ATA
  95  * reference clock which is 30 nanoseconds per unit at 66MHz and 20
  96  * nanoseconds per unit at 50 MHz. The PIO timings assume 33MHz speed for
  97  * PIO.
  98  *
  99  * pio_active_time: array of 5 elements for T2 timing for Mode 0,
 100  * 1, 2, 3 and 4. Range 0..15.
 101  * pio_recovery_time: array of 5 elements for T2l timing for Mode 0,
 102  * 1, 2, 3 and 4. Range 0..15.
 103  * mdma_50_active_time: array of 4 elements for Td timing for multi
 104  * word DMA, Mode 0, 1, and 2 at 50 MHz. Range 0..15.
 105  * mdma_50_recovery_time: array of 4 elements for Tk timing for
 106  * multi word DMA, Mode 0, 1 and 2 at 50 MHz. Range 0..15.
 107  * mdma_66_active_time: array of 4 elements for Td timing for multi
 108  * word DMA, Mode 0, 1 and 2 at 66 MHz. Range 0..15.
 109  * mdma_66_recovery_time: array of 4 elements for Tk timing for
 110  * multi word DMA, Mode 0, 1 and 2 at 66 MHz. Range 0..15.
 111  * udma_50_setup_time: array of 4 elements for Tvds timing for ultra
 112  * DMA, Mode 0, 1, 2, 3, 4 and 5 at 50 MHz. Range 0..7.
 113  * udma_50_hold_time: array of 4 elements for Tdvh timing for
 114  * multi word DMA, Mode 0, 1, 2, 3, 4 and 5 at 50 MHz, Range 0..7.
 115  * udma_66_setup_time: array of 4 elements for Tvds timing for multi
 116  * word DMA, Mode 0, 1, 2, 3, 4, 5 and 6 at 66 MHz. Range 0..7.
 117  * udma_66_hold_time: array of 4 elements for Tdvh timing for
 118  * multi word DMA, Mode 0, 1, 2, 3, 4, 5 and 6 at 66 MHz. Range 0..7.
 119  */
 120 static const u8 pio_active_time[5] = {10, 10, 10, 3, 3};
 121 static const u8 pio_recovery_time[5] = {10, 3, 1, 3, 1};
 122 static const u8 mwdma_50_active_time[3] = {6, 2, 2};
 123 static const u8 mwdma_50_recovery_time[3] = {6, 2, 1};
 124 static const u8 mwdma_66_active_time[3] = {8, 3, 3};
 125 static const u8 mwdma_66_recovery_time[3] = {8, 2, 1};
 126 static const u8 udma_50_setup_time[6] = {3, 3, 2, 2, 1, 1};
 127 static const u8 udma_50_hold_time[6] = {3, 1, 1, 1, 1, 1};
 128 static const u8 udma_66_setup_time[7] = {4, 4, 3, 2, };
 129 static const u8 udma_66_hold_time[7] = {};
 130
 131 /*
 132  * We set 66 MHz for all MWDMA modes
 133  */
 134 static const bool set_mdma_66_mhz[] = { true, true, true, true };
 135
 136 /*
 137  * We set 66 MHz for UDMA modes 3, 4 and 6 and no others
 138  */
 139 static const bool set_udma_66_mhz[] = { false, false, false, true, true, false, true };
 140
 141 static void ftide010_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 142 {
 143         struct ftide010 *ftide = ap->host->private_data;
 144         u8 speed = adev->dma_mode;
 145         u8 devno = adev->devno & 1;
 146         u8 udma_en_mask;
 147         u8 f66m_en_mask;
 148         u8 clkreg;
 149         u8 timreg;
 150         u8 i;
 151
 152         /* Target device 0 (master) or 1 (slave) */
 153         if (!devno) {
 154                 udma_en_mask = FTIDE010_CLK_MOD_DEV0_UDMA_EN;
 155                 f66m_en_mask = FTIDE010_CLK_MOD_DEV0_CLK_SEL;
 156         } else {
 157                 udma_en_mask = FTIDE010_CLK_MOD_DEV1_UDMA_EN;
 158                 f66m_en_mask = FTIDE010_CLK_MOD_DEV1_CLK_SEL;
 159         }
 160
 161         clkreg = readb(ftide->base + FTIDE010_CLK_MOD);
 162         clkreg &= ~udma_en_mask;
 163         clkreg &= ~f66m_en_mask;
 164
 165         if (speed & XFER_UDMA_0) {
 166                 i = speed & ~XFER_UDMA_0;
 167                 dev_dbg(ftide->dev, "set UDMA mode %02x, index %d\n",
 168                         speed, i);
 169
 170                 clkreg |= udma_en_mask;
 171                 if (set_udma_66_mhz[i]) {
 172                         clkreg |= f66m_en_mask;
 173                         timreg = udma_66_setup_time[i] << 4 |
 174                                 udma_66_hold_time[i];
 175                 } else {
 176                         timreg = udma_50_setup_time[i] << 4 |
 177                                 udma_50_hold_time[i];
 178                 }
 179
 180                 /* A special bit needs to be set for modes 5 and 6 */
 181                 if (i >= 5)
 182                         timreg |= FTIDE010_UDMA_TIMING_MODE_56;
 183
 184                 dev_dbg(ftide->dev, "UDMA write clkreg = %02x, timreg = %02x\n",
 185                         clkreg, timreg);
 186
 187                 writeb(clkreg, ftide->base + FTIDE010_CLK_MOD);
 188                 writeb(timreg, ftide->base + FTIDE010_UDMA_TIMING0 + devno);
 189         } else {
 190                 i = speed & ~XFER_MW_DMA_0;
 191                 dev_dbg(ftide->dev, "set MWDMA mode %02x, index %d\n",
 192                         speed, i);
 193
 194                 if (set_mdma_66_mhz[i]) {
 195                         clkreg |= f66m_en_mask;
 196                         timreg = mwdma_66_active_time[i] << 4 |
 197                                 mwdma_66_recovery_time[i];
 198                 } else {
 199                         timreg = mwdma_50_active_time[i] << 4 |
 200                                 mwdma_50_recovery_time[i];
 201                 }
 202                 dev_dbg(ftide->dev,
 203                         "MWDMA write clkreg = %02x, timreg = %02x\n",
 204                         clkreg, timreg);
 205                 /* This will affect all devices */
 206                 writeb(clkreg, ftide->base + FTIDE010_CLK_MOD);
 207                 writeb(timreg, ftide->base + FTIDE010_MWDMA_TIMING);
 208         }
 209
 210         /*
 211          * Store the current device (master or slave) in ap->private_data
 212          * so that .qc_issue() can detect if this changes and reprogram
 213          * the DMA settings.
 214          */
 215         ap->private_data = adev;
 216
 217         return;
 218 }
 219
 220 static void ftide010_set_piomode(struct ata_port *ap, struct ata_device *adev)
 221 {
 222         struct ftide010 *ftide = ap->host->private_data;
 223         u8 pio = adev->pio_mode - XFER_PIO_0;
 224
 225         dev_dbg(ftide->dev, "set PIO mode %02x, index %d\n",
 226                 adev->pio_mode, pio);
 227         writeb(pio_active_time[pio] << 4 | pio_recovery_time[pio],
 228                ftide->base + FTIDE010_PIO_TIMING);
 229 }
 230
 231 /*
 232  * We implement our own qc_issue() callback since we may need to set up
 233  * the timings differently for master and slave transfers: the CLK_MOD_REG
 234  * and MWDMA_TIMING_REG is shared between master and slave, so reprogramming
 235  * this may be necessary.
 236  */
 237 static unsigned int ftide010_qc_issue(struct ata_queued_cmd *qc)
 238 {
 239         struct ata_port *ap = qc->ap;
 240         struct ata_device *adev = qc->dev;
 241
 242         /*
 243          * If the device changed, i.e. slave->master, master->slave,
 244          * then set up the DMA mode again so we are sure the timings
 245          * are correct.
 246          */
 247         if (adev != ap->private_data && ata_dma_enabled(adev))
 248                 ftide010_set_dmamode(ap, adev);
 249
 250         return ata_bmdma_qc_issue(qc);
 251 }
 252
 253 static struct ata_port_operations pata_ftide010_port_ops = {
 254         .inherits       = &ata_bmdma_port_ops,
 255         .set_dmamode    = ftide010_set_dmamode,
 256         .set_piomode    = ftide010_set_piomode,
 257         .qc_issue       = ftide010_qc_issue,
 258 };
 259
 260 static struct ata_port_info ftide010_port_info = {
 261         .flags          = ATA_FLAG_SLAVE_POSS,
 262         .mwdma_mask     = ATA_MWDMA2,
 263         .udma_mask      = ATA_UDMA6,
 264         .pio_mask       = ATA_PIO4,
 265         .port_ops       = &pata_ftide010_port_ops,
 266 };
 267
 268 #if IS_ENABLED(CONFIG_SATA_GEMINI)
 269
 270 static int pata_ftide010_gemini_port_start(struct ata_port *ap)
 271 {
 272         struct ftide010 *ftide = ap->host->private_data;
 273         struct device *dev = ftide->dev;
 274         struct sata_gemini *sg = ftide->sg;
 275         int bridges = 0;
 276         int ret;
 277
 278         ret = ata_bmdma_port_start(ap);
 279         if (ret)
 280                 return ret;
 281
 282         if (ftide->master_to_sata0) {
 283                 dev_info(dev, "SATA0 (master) start\n");
 284                 ret = gemini_sata_start_bridge(sg, 0);
 285                 if (!ret)
 286                         bridges++;
 287         }
 288         if (ftide->master_to_sata1) {
 289                 dev_info(dev, "SATA1 (master) start\n");
 290                 ret = gemini_sata_start_bridge(sg, 1);
 291                 if (!ret)
 292                         bridges++;
 293         }
 294         /* Avoid double-starting */
 295         if (ftide->slave_to_sata0 && !ftide->master_to_sata0) {
 296                 dev_info(dev, "SATA0 (slave) start\n");
 297                 ret = gemini_sata_start_bridge(sg, 0);
 298                 if (!ret)
 299                         bridges++;
 300         }
 301         /* Avoid double-starting */
 302         if (ftide->slave_to_sata1 && !ftide->master_to_sata1) {
 303                 dev_info(dev, "SATA1 (slave) start\n");
 304                 ret = gemini_sata_start_bridge(sg, 1);
 305                 if (!ret)
 306                         bridges++;
 307         }
 308
 309         dev_info(dev, "brought %d bridges online\n", bridges);
 310         return (bridges > 0) ? 0 : -EINVAL; // -ENODEV;
 311 }
 312
 313 static void pata_ftide010_gemini_port_stop(struct ata_port *ap)
 314 {
 315         struct ftide010 *ftide = ap->host->private_data;
 316         struct device *dev = ftide->dev;
 317         struct sata_gemini *sg = ftide->sg;
 318
 319         if (ftide->master_to_sata0) {
 320                 dev_info(dev, "SATA0 (master) stop\n");
 321                 gemini_sata_stop_bridge(sg, 0);
 322         }
 323         if (ftide->master_to_sata1) {
 324                 dev_info(dev, "SATA1 (master) stop\n");
 325                 gemini_sata_stop_bridge(sg, 1);
 326         }
 327         /* Avoid double-stopping */
 328         if (ftide->slave_to_sata0 && !ftide->master_to_sata0) {
 329                 dev_info(dev, "SATA0 (slave) stop\n");
 330                 gemini_sata_stop_bridge(sg, 0);
 331         }
 332         /* Avoid double-stopping */
 333         if (ftide->slave_to_sata1 && !ftide->master_to_sata1) {
 334                 dev_info(dev, "SATA1 (slave) stop\n");
 335                 gemini_sata_stop_bridge(sg, 1);
 336         }
 337 }
 338
 339 static int pata_ftide010_gemini_cable_detect(struct ata_port *ap)
 340 {
 341         struct ftide010 *ftide = ap->host->private_data;
 342
 343         /*
 344          * Return the master cable, I have no clue how to return a different
 345          * cable for the slave than for the master.
 346          */
 347         return ftide->master_cbl;
 348 }
 349
 350 static int pata_ftide010_gemini_init(struct ftide010 *ftide,
 351                                      struct ata_port_info *pi,
 352                                      bool is_ata1)
 353 {
 354         struct device *dev = ftide->dev;
 355         struct sata_gemini *sg;
 356         enum gemini_muxmode muxmode;
 357
 358         /* Look up SATA bridge */
 359         sg = gemini_sata_bridge_get();
 360         if (IS_ERR(sg))
 361                 return PTR_ERR(sg);
 362         ftide->sg = sg;
 363
 364         muxmode = gemini_sata_get_muxmode(sg);
 365
 366         /* Special ops */
 367         pata_ftide010_port_ops.port_start =
 368                 pata_ftide010_gemini_port_start;
 369         pata_ftide010_port_ops.port_stop =
 370                 pata_ftide010_gemini_port_stop;
 371         pata_ftide010_port_ops.cable_detect =
 372                 pata_ftide010_gemini_cable_detect;
 373
 374         /* Flag port as SATA-capable */
 375         if (gemini_sata_bridge_enabled(sg, is_ata1))
 376                 pi->flags |= ATA_FLAG_SATA;
 377
 378         /* This device has broken DMA, only PIO works */
 379         if (of_machine_is_compatible("itian,sq201")) {
 380                 pi->mwdma_mask = 0;
 381                 pi->udma_mask = 0;
 382         }
 383
 384         /*
 385          * We assume that a simple 40-wire cable is used in the PATA mode.
 386          * if you're adding a system using the PATA interface, make sure
 387          * the right cable is set up here, it might be necessary to use
 388          * special hardware detection or encode the cable type in the device
 389          * tree with special properties.
 390          */
 391         if (!is_ata1) {
 392                 switch (muxmode) {
 393                 case GEMINI_MUXMODE_0:
 394                         ftide->master_cbl = ATA_CBL_SATA;
 395                         ftide->slave_cbl = ATA_CBL_PATA40;
 396                         ftide->master_to_sata0 = true;
 397                         break;
 398                 case GEMINI_MUXMODE_1:
 399                         ftide->master_cbl = ATA_CBL_SATA;
 400                         ftide->slave_cbl = ATA_CBL_NONE;
 401                         ftide->master_to_sata0 = true;
 402                         break;
 403                 case GEMINI_MUXMODE_2:
 404                         ftide->master_cbl = ATA_CBL_PATA40;
 405                         ftide->slave_cbl = ATA_CBL_PATA40;
 406                         break;
 407                 case GEMINI_MUXMODE_3:
 408                         ftide->master_cbl = ATA_CBL_SATA;
 409                         ftide->slave_cbl = ATA_CBL_SATA;
 410                         ftide->master_to_sata0 = true;
 411                         ftide->slave_to_sata1 = true;
 412                         break;
 413                 }
 414         } else {
 415                 switch (muxmode) {
 416                 case GEMINI_MUXMODE_0:
 417                         ftide->master_cbl = ATA_CBL_SATA;
 418                         ftide->slave_cbl = ATA_CBL_NONE;
 419                         ftide->master_to_sata1 = true;
 420                         break;
 421                 case GEMINI_MUXMODE_1:
 422                         ftide->master_cbl = ATA_CBL_SATA;
 423                         ftide->slave_cbl = ATA_CBL_PATA40;
 424                         ftide->master_to_sata1 = true;
 425                         break;
 426                 case GEMINI_MUXMODE_2:
 427                         ftide->master_cbl = ATA_CBL_SATA;
 428                         ftide->slave_cbl = ATA_CBL_SATA;
 429                         ftide->slave_to_sata0 = true;
 430                         ftide->master_to_sata1 = true;
 431                         break;
 432                 case GEMINI_MUXMODE_3:
 433                         ftide->master_cbl = ATA_CBL_PATA40;
 434                         ftide->slave_cbl = ATA_CBL_PATA40;
 435                         break;
 436                 }
 437         }
 438         dev_info(dev, "set up Gemini PATA%d\n", is_ata1);
 439
 440         return 0;
 441 }
 442 #else
 443 static int pata_ftide010_gemini_init(struct ftide010 *ftide,
 444                                      struct ata_port_info *pi,
 445                                      bool is_ata1)
 446 {
 447         return -ENOTSUPP;
 448 }
 449 #endif
 450
 451
 452 static int pata_ftide010_probe(struct platform_device *pdev)
 453 {
 454         struct device *dev = &pdev->dev;
 455         struct device_node *np = dev->of_node;
 456         struct ata_port_info pi = ftide010_port_info;
 457         const struct ata_port_info *ppi[] = { &pi, NULL };
 458         struct ftide010 *ftide;
 459         struct resource *res;
 460         int irq;
 461         int ret;
 462         int i;
 463
 464         ftide = devm_kzalloc(dev, sizeof(*ftide), GFP_KERNEL);
 465         if (!ftide)
 466                 return -ENOMEM;
 467         ftide->dev = dev;
 468
 469         irq = platform_get_irq(pdev, 0);
 470         if (irq < 0)
 471                 return irq;
 472
 473         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 474         if (!res)
 475                 return -ENODEV;
 476
 477         ftide->base = devm_ioremap_resource(dev, res);
 478         if (IS_ERR(ftide->base))
 479                 return PTR_ERR(ftide->base);
 480
 481         ftide->pclk = devm_clk_get(dev, "PCLK");
 482         if (!IS_ERR(ftide->pclk)) {
 483                 ret = clk_prepare_enable(ftide->pclk);
 484                 if (ret) {
 485                         dev_err(dev, "failed to enable PCLK\n");
 486                         return ret;
 487                 }
 488         }
 489
 490         /* Some special Cortina Gemini init, if needed */
 491         if (of_device_is_compatible(np, "cortina,gemini-pata")) {
 492                 /*
 493                  * We need to know which instance is probing (the
 494                  * Gemini has two instances of FTIDE010) and we do
 495                  * this simply by looking at the physical base
 496                  * address, which is 0x63400000 for ATA1, else we
 497                  * are ATA0. This will also set up the cable types.
 498                  */
 499                 ret = pata_ftide010_gemini_init(ftide,
 500                                 &pi,
 501                                 (res->start == 0x63400000));
 502                 if (ret)
 503                         goto err_dis_clk;
 504         } else {
 505                 /* Else assume we are connected using PATA40 */
 506                 ftide->master_cbl = ATA_CBL_PATA40;
 507                 ftide->slave_cbl = ATA_CBL_PATA40;
 508         }
 509
 510         ftide->host = ata_host_alloc_pinfo(dev, ppi, 1);
 511         if (!ftide->host) {
 512                 ret = -ENOMEM;
 513                 goto err_dis_clk;
 514         }
 515         ftide->host->private_data = ftide;
 516
 517         for (i = 0; i < ftide->host->n_ports; i++) {
 518                 struct ata_port *ap = ftide->host->ports[i];
 519                 struct ata_ioports *ioaddr = &ap->ioaddr;
 520
 521                 ioaddr->bmdma_addr = ftide->base + FTIDE010_DMA_REG;
 522                 ioaddr->cmd_addr = ftide->base + FTIDE010_CMD_DATA;
 523                 ioaddr->ctl_addr = ftide->base + FTIDE010_ALTSTAT_CTRL;
 524                 ioaddr->altstatus_addr = ftide->base + FTIDE010_ALTSTAT_CTRL;
 525                 ata_sff_std_ports(ioaddr);
 526         }
 527
 528         dev_info(dev, "device ID %08x, irq %d, reg %pR\n",
 529                  readl(ftide->base + FTIDE010_IDE_DEVICE_ID), irq, res);
 530
 531         ret = ata_host_activate(ftide->host, irq, ata_bmdma_interrupt,
 532                                 0, &pata_ftide010_sht);
 533         if (ret)
 534                 goto err_dis_clk;
 535
 536         return 0;
 537
 538 err_dis_clk:
 539         if (!IS_ERR(ftide->pclk))
 540                 clk_disable_unprepare(ftide->pclk);
 541         return ret;
 542 }
 543
 544 static int pata_ftide010_remove(struct platform_device *pdev)
 545 {
 546         struct ata_host *host = platform_get_drvdata(pdev);
 547         struct ftide010 *ftide = host->private_data;
 548
 549         ata_host_detach(ftide->host);
 550         if (!IS_ERR(ftide->pclk))
 551                 clk_disable_unprepare(ftide->pclk);
 552
 553         return 0;
 554 }
 555
 556 static const struct of_device_id pata_ftide010_of_match[] = {
 557         {
 558                 .compatible = "faraday,ftide010",
 559         },
 560         {},
 561 };
 562
 563 static struct platform_driver pata_ftide010_driver = {
 564         .driver = {
 565                 .name = DRV_NAME,
 566                 .of_match_table = of_match_ptr(pata_ftide010_of_match),
 567         },
 568         .probe = pata_ftide010_probe,
 569         .remove = pata_ftide010_remove,
 570 };
 571 module_platform_driver(pata_ftide010_driver);
 572
 573 MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
 574 MODULE_LICENSE("GPL");
 575 MODULE_ALIAS("platform:" DRV_NAME);