1 // SPDX-License-Identifier: GPL-2.0+
2 // Copyright 2018 IBM Corporation
5 #include <linux/dma-mapping.h>
7 #include <linux/mfd/syscon.h>
8 #include <linux/module.h>
10 #include <linux/of_reserved_mem.h>
11 #include <linux/platform_device.h>
12 #include <linux/regmap.h>
13 #include <linux/reset.h>
15 #include <drm/drm_atomic_helper.h>
16 #include <drm/drm_crtc_helper.h>
17 #include <drm/drm_device.h>
18 #include <drm/drm_fb_cma_helper.h>
19 #include <drm/drm_fb_helper.h>
20 #include <drm/drm_gem_cma_helper.h>
21 #include <drm/drm_gem_framebuffer_helper.h>
22 #include <drm/drm_probe_helper.h>
23 #include <drm/drm_simple_kms_helper.h>
24 #include <drm/drm_vblank.h>
25 #include <drm/drm_drv.h>
27 #include "aspeed_gfx.h"
30 * DOC: ASPEED GFX Driver
32 * This driver is for the ASPEED BMC SoC's 'GFX' display hardware, also called
33 * the 'SOC Display Controller' in the datasheet. This driver runs on the ARM
34 * based BMC systems, unlike the ast driver which runs on a host CPU and is for
35 * a PCIe graphics device.
37 * The AST2500 supports a total of 3 output paths:
39 * 1. VGA output, the output target can choose either or both to the DAC
42 * 2. Graphics CRT output, the output target can choose either or both to
43 * the DAC or DVO interface.
45 * 3. Video input from DVO, the video input can be used for video engine
46 * capture or DAC display output.
48 * Output options are selected in SCU2C.
50 * The "VGA mode" device is the PCI attached controller. The "Graphics CRT"
51 * is the ARM's internal display controller.
53 * The driver only supports a simple configuration consisting of a 40MHz
54 * pixel clock, fixed by hardware limitations, and the VGA output path.
56 * The driver was written with the 'AST2500 Software Programming Guide' v17,
57 * which is available under NDA from ASPEED.
60 static const struct drm_mode_config_funcs aspeed_gfx_mode_config_funcs
= {
61 .fb_create
= drm_gem_fb_create
,
62 .atomic_check
= drm_atomic_helper_check
,
63 .atomic_commit
= drm_atomic_helper_commit
,
66 static int aspeed_gfx_setup_mode_config(struct drm_device
*drm
)
70 ret
= drmm_mode_config_init(drm
);
74 drm
->mode_config
.min_width
= 0;
75 drm
->mode_config
.min_height
= 0;
76 drm
->mode_config
.max_width
= 800;
77 drm
->mode_config
.max_height
= 600;
78 drm
->mode_config
.funcs
= &aspeed_gfx_mode_config_funcs
;
83 static irqreturn_t
aspeed_gfx_irq_handler(int irq
, void *data
)
85 struct drm_device
*drm
= data
;
86 struct aspeed_gfx
*priv
= to_aspeed_gfx(drm
);
89 reg
= readl(priv
->base
+ CRT_CTRL1
);
91 if (reg
& CRT_CTRL_VERTICAL_INTR_STS
) {
92 drm_crtc_handle_vblank(&priv
->pipe
.crtc
);
93 writel(reg
, priv
->base
+ CRT_CTRL1
);
102 static int aspeed_gfx_load(struct drm_device
*drm
)
104 struct platform_device
*pdev
= to_platform_device(drm
->dev
);
105 struct aspeed_gfx
*priv
= to_aspeed_gfx(drm
);
106 struct resource
*res
;
109 res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
110 priv
->base
= devm_ioremap_resource(drm
->dev
, res
);
111 if (IS_ERR(priv
->base
))
112 return PTR_ERR(priv
->base
);
114 priv
->scu
= syscon_regmap_lookup_by_compatible("aspeed,ast2500-scu");
115 if (IS_ERR(priv
->scu
)) {
116 dev_err(&pdev
->dev
, "failed to find SCU regmap\n");
117 return PTR_ERR(priv
->scu
);
120 ret
= of_reserved_mem_device_init(drm
->dev
);
123 "failed to initialize reserved mem: %d\n", ret
);
127 ret
= dma_set_mask_and_coherent(drm
->dev
, DMA_BIT_MASK(32));
129 dev_err(&pdev
->dev
, "failed to set DMA mask: %d\n", ret
);
133 priv
->rst
= devm_reset_control_get_exclusive(&pdev
->dev
, NULL
);
134 if (IS_ERR(priv
->rst
)) {
136 "missing or invalid reset controller device tree entry");
137 return PTR_ERR(priv
->rst
);
139 reset_control_deassert(priv
->rst
);
141 priv
->clk
= devm_clk_get(drm
->dev
, NULL
);
142 if (IS_ERR(priv
->clk
)) {
144 "missing or invalid clk device tree entry");
145 return PTR_ERR(priv
->clk
);
147 clk_prepare_enable(priv
->clk
);
149 /* Sanitize control registers */
150 writel(0, priv
->base
+ CRT_CTRL1
);
151 writel(0, priv
->base
+ CRT_CTRL2
);
153 ret
= aspeed_gfx_setup_mode_config(drm
);
157 ret
= drm_vblank_init(drm
, 1);
159 dev_err(drm
->dev
, "Failed to initialise vblank\n");
163 ret
= aspeed_gfx_create_output(drm
);
165 dev_err(drm
->dev
, "Failed to create outputs\n");
169 ret
= aspeed_gfx_create_pipe(drm
);
171 dev_err(drm
->dev
, "Cannot setup simple display pipe\n");
175 ret
= devm_request_irq(drm
->dev
, platform_get_irq(pdev
, 0),
176 aspeed_gfx_irq_handler
, 0, "aspeed gfx", drm
);
178 dev_err(drm
->dev
, "Failed to install IRQ handler\n");
182 drm_mode_config_reset(drm
);
187 static void aspeed_gfx_unload(struct drm_device
*drm
)
189 drm_kms_helper_poll_fini(drm
);
192 DEFINE_DRM_GEM_CMA_FOPS(fops
);
194 static const struct drm_driver aspeed_gfx_driver
= {
195 .driver_features
= DRIVER_GEM
| DRIVER_MODESET
| DRIVER_ATOMIC
,
196 DRM_GEM_CMA_DRIVER_OPS
,
198 .name
= "aspeed-gfx-drm",
199 .desc
= "ASPEED GFX DRM",
205 static const struct of_device_id aspeed_gfx_match
[] = {
206 { .compatible
= "aspeed,ast2500-gfx" },
210 #define ASPEED_SCU_VGA0 0x50
211 #define ASPEED_SCU_MISC_CTRL 0x2c
213 static ssize_t
dac_mux_store(struct device
*dev
, struct device_attribute
*attr
,
214 const char *buf
, size_t count
)
216 struct aspeed_gfx
*priv
= dev_get_drvdata(dev
);
220 rc
= kstrtou32(buf
, 0, &val
);
227 rc
= regmap_update_bits(priv
->scu
, ASPEED_SCU_MISC_CTRL
, 0x30000, val
<< 16);
234 static ssize_t
dac_mux_show(struct device
*dev
, struct device_attribute
*attr
, char *buf
)
236 struct aspeed_gfx
*priv
= dev_get_drvdata(dev
);
240 rc
= regmap_read(priv
->scu
, ASPEED_SCU_MISC_CTRL
, ®
);
244 return sprintf(buf
, "%u\n", (reg
>> 16) & 0x3);
246 static DEVICE_ATTR_RW(dac_mux
);
249 vga_pw_show(struct device
*dev
, struct device_attribute
*attr
, char *buf
)
251 struct aspeed_gfx
*priv
= dev_get_drvdata(dev
);
255 rc
= regmap_read(priv
->scu
, ASPEED_SCU_VGA0
, ®
);
259 return sprintf(buf
, "%u\n", reg
& 1);
261 static DEVICE_ATTR_RO(vga_pw
);
263 static struct attribute
*aspeed_sysfs_entries
[] = {
264 &dev_attr_vga_pw
.attr
,
265 &dev_attr_dac_mux
.attr
,
269 static struct attribute_group aspeed_sysfs_attr_group
= {
270 .attrs
= aspeed_sysfs_entries
,
273 static int aspeed_gfx_probe(struct platform_device
*pdev
)
275 struct aspeed_gfx
*priv
;
278 priv
= devm_drm_dev_alloc(&pdev
->dev
, &aspeed_gfx_driver
,
279 struct aspeed_gfx
, drm
);
281 return PTR_ERR(priv
);
283 ret
= aspeed_gfx_load(&priv
->drm
);
287 dev_set_drvdata(&pdev
->dev
, priv
);
289 ret
= sysfs_create_group(&pdev
->dev
.kobj
, &aspeed_sysfs_attr_group
);
293 ret
= drm_dev_register(&priv
->drm
, 0);
297 drm_fbdev_generic_setup(&priv
->drm
, 32);
301 sysfs_remove_group(&pdev
->dev
.kobj
, &aspeed_sysfs_attr_group
);
302 aspeed_gfx_unload(&priv
->drm
);
307 static int aspeed_gfx_remove(struct platform_device
*pdev
)
309 struct drm_device
*drm
= platform_get_drvdata(pdev
);
311 sysfs_remove_group(&pdev
->dev
.kobj
, &aspeed_sysfs_attr_group
);
312 drm_dev_unregister(drm
);
313 aspeed_gfx_unload(drm
);
318 static struct platform_driver aspeed_gfx_platform_driver
= {
319 .probe
= aspeed_gfx_probe
,
320 .remove
= aspeed_gfx_remove
,
322 .name
= "aspeed_gfx",
323 .of_match_table
= aspeed_gfx_match
,
327 module_platform_driver(aspeed_gfx_platform_driver
);
329 MODULE_AUTHOR("Joel Stanley <joel@jms.id.au>");
330 MODULE_DESCRIPTION("ASPEED BMC DRM/KMS driver");
331 MODULE_LICENSE("GPL");