?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block
[linux/fpc-iii.git] / drivers / gpu / drm / bridge / tc358767.c
blob34a3e4e9f7175c90c86bcd26f0ed557910bbdd62
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * tc358767 eDP bridge driver
4 *
5 * Copyright (C) 2016 CogentEmbedded Inc
6 * Author: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
7 *
8 * Copyright (C) 2016 Pengutronix, Philipp Zabel <p.zabel@pengutronix.de>
9 *
10 * Copyright (C) 2016 Zodiac Inflight Innovations
11 *
12 * Initially based on: drivers/gpu/drm/i2c/tda998x_drv.c
13 *
14 * Copyright (C) 2012 Texas Instruments
15 * Author: Rob Clark <robdclark@gmail.com>
16 */
17
18 #include <linux/bitfield.h>
19 #include <linux/clk.h>
20 #include <linux/device.h>
21 #include <linux/gpio/consumer.h>
22 #include <linux/i2c.h>
23 #include <linux/kernel.h>
24 #include <linux/module.h>
25 #include <linux/regmap.h>
26 #include <linux/slab.h>
27
28 #include <drm/drm_atomic_helper.h>
29 #include <drm/drm_bridge.h>
30 #include <drm/drm_dp_helper.h>
31 #include <drm/drm_edid.h>
32 #include <drm/drm_of.h>
33 #include <drm/drm_panel.h>
34 #include <drm/drm_print.h>
35 #include <drm/drm_probe_helper.h>
36
37 /* Registers */
38
39 /* Display Parallel Interface */
40 #define DPIPXLFMT 0x0440
41 #define VS_POL_ACTIVE_LOW (1 << 10)
42 #define HS_POL_ACTIVE_LOW (1 << 9)
43 #define DE_POL_ACTIVE_HIGH (0 << 8)
44 #define SUB_CFG_TYPE_CONFIG1 (0 << 2) /* LSB aligned */
45 #define SUB_CFG_TYPE_CONFIG2 (1 << 2) /* Loosely Packed */
46 #define SUB_CFG_TYPE_CONFIG3 (2 << 2) /* LSB aligned 8-bit */
47 #define DPI_BPP_RGB888 (0 << 0)
48 #define DPI_BPP_RGB666 (1 << 0)
49 #define DPI_BPP_RGB565 (2 << 0)
50
51 /* Video Path */
52 #define VPCTRL0 0x0450
53 #define VSDELAY GENMASK(31, 20)
54 #define OPXLFMT_RGB666 (0 << 8)
55 #define OPXLFMT_RGB888 (1 << 8)
56 #define FRMSYNC_DISABLED (0 << 4) /* Video Timing Gen Disabled */
57 #define FRMSYNC_ENABLED (1 << 4) /* Video Timing Gen Enabled */
58 #define MSF_DISABLED (0 << 0) /* Magic Square FRC disabled */
59 #define MSF_ENABLED (1 << 0) /* Magic Square FRC enabled */
60 #define HTIM01 0x0454
61 #define HPW GENMASK(8, 0)
62 #define HBPR GENMASK(24, 16)
63 #define HTIM02 0x0458
64 #define HDISPR GENMASK(10, 0)
65 #define HFPR GENMASK(24, 16)
66 #define VTIM01 0x045c
67 #define VSPR GENMASK(7, 0)
68 #define VBPR GENMASK(23, 16)
69 #define VTIM02 0x0460
70 #define VFPR GENMASK(23, 16)
71 #define VDISPR GENMASK(10, 0)
72 #define VFUEN0 0x0464
73 #define VFUEN BIT(0) /* Video Frame Timing Upload */
74
75 /* System */
76 #define TC_IDREG 0x0500
77 #define SYSSTAT 0x0508
78 #define SYSCTRL 0x0510
79 #define DP0_AUDSRC_NO_INPUT (0 << 3)
80 #define DP0_AUDSRC_I2S_RX (1 << 3)
81 #define DP0_VIDSRC_NO_INPUT (0 << 0)
82 #define DP0_VIDSRC_DSI_RX (1 << 0)
83 #define DP0_VIDSRC_DPI_RX (2 << 0)
84 #define DP0_VIDSRC_COLOR_BAR (3 << 0)
85 #define SYSRSTENB 0x050c
86 #define ENBI2C (1 << 0)
87 #define ENBLCD0 (1 << 2)
88 #define ENBBM (1 << 3)
89 #define ENBDSIRX (1 << 4)
90 #define ENBREG (1 << 5)
91 #define ENBHDCP (1 << 8)
92 #define GPIOM 0x0540
93 #define GPIOC 0x0544
94 #define GPIOO 0x0548
95 #define GPIOI 0x054c
96 #define INTCTL_G 0x0560
97 #define INTSTS_G 0x0564
98
99 #define INT_SYSERR BIT(16)
100 #define INT_GPIO_H(x) (1 << (x == 0 ? 2 : 10))
101 #define INT_GPIO_LC(x) (1 << (x == 0 ? 3 : 11))
102
103 #define INT_GP0_LCNT 0x0584
104 #define INT_GP1_LCNT 0x0588
105
106 /* Control */
107 #define DP0CTL 0x0600
108 #define VID_MN_GEN BIT(6) /* Auto-generate M/N values */
109 #define EF_EN BIT(5) /* Enable Enhanced Framing */
110 #define VID_EN BIT(1) /* Video transmission enable */
111 #define DP_EN BIT(0) /* Enable DPTX function */
112
113 /* Clocks */
114 #define DP0_VIDMNGEN0 0x0610
115 #define DP0_VIDMNGEN1 0x0614
116 #define DP0_VMNGENSTATUS 0x0618
117
118 /* Main Channel */
119 #define DP0_SECSAMPLE 0x0640
120 #define DP0_VIDSYNCDELAY 0x0644
121 #define VID_SYNC_DLY GENMASK(15, 0)
122 #define THRESH_DLY GENMASK(31, 16)
123
124 #define DP0_TOTALVAL 0x0648
125 #define H_TOTAL GENMASK(15, 0)
126 #define V_TOTAL GENMASK(31, 16)
127 #define DP0_STARTVAL 0x064c
128 #define H_START GENMASK(15, 0)
129 #define V_START GENMASK(31, 16)
130 #define DP0_ACTIVEVAL 0x0650
131 #define H_ACT GENMASK(15, 0)
132 #define V_ACT GENMASK(31, 16)
133
134 #define DP0_SYNCVAL 0x0654
135 #define VS_WIDTH GENMASK(30, 16)
136 #define HS_WIDTH GENMASK(14, 0)
137 #define SYNCVAL_HS_POL_ACTIVE_LOW (1 << 15)
138 #define SYNCVAL_VS_POL_ACTIVE_LOW (1 << 31)
139 #define DP0_MISC 0x0658
140 #define TU_SIZE_RECOMMENDED (63) /* LSCLK cycles per TU */
141 #define MAX_TU_SYMBOL GENMASK(28, 23)
142 #define TU_SIZE GENMASK(21, 16)
143 #define BPC_6 (0 << 5)
144 #define BPC_8 (1 << 5)
145
146 /* AUX channel */
147 #define DP0_AUXCFG0 0x0660
148 #define DP0_AUXCFG0_BSIZE GENMASK(11, 8)
149 #define DP0_AUXCFG0_ADDR_ONLY BIT(4)
150 #define DP0_AUXCFG1 0x0664
151 #define AUX_RX_FILTER_EN BIT(16)
152
153 #define DP0_AUXADDR 0x0668
154 #define DP0_AUXWDATA(i) (0x066c + (i) * 4)
155 #define DP0_AUXRDATA(i) (0x067c + (i) * 4)
156 #define DP0_AUXSTATUS 0x068c
157 #define AUX_BYTES GENMASK(15, 8)
158 #define AUX_STATUS GENMASK(7, 4)
159 #define AUX_TIMEOUT BIT(1)
160 #define AUX_BUSY BIT(0)
161 #define DP0_AUXI2CADR 0x0698
162
163 /* Link Training */
164 #define DP0_SRCCTRL 0x06a0
165 #define DP0_SRCCTRL_SCRMBLDIS BIT(13)
166 #define DP0_SRCCTRL_EN810B BIT(12)
167 #define DP0_SRCCTRL_NOTP (0 << 8)
168 #define DP0_SRCCTRL_TP1 (1 << 8)
169 #define DP0_SRCCTRL_TP2 (2 << 8)
170 #define DP0_SRCCTRL_LANESKEW BIT(7)
171 #define DP0_SRCCTRL_SSCG BIT(3)
172 #define DP0_SRCCTRL_LANES_1 (0 << 2)
173 #define DP0_SRCCTRL_LANES_2 (1 << 2)
174 #define DP0_SRCCTRL_BW27 (1 << 1)
175 #define DP0_SRCCTRL_BW162 (0 << 1)
176 #define DP0_SRCCTRL_AUTOCORRECT BIT(0)
177 #define DP0_LTSTAT 0x06d0
178 #define LT_LOOPDONE BIT(13)
179 #define LT_STATUS_MASK (0x1f << 8)
180 #define LT_CHANNEL1_EQ_BITS (DP_CHANNEL_EQ_BITS << 4)
181 #define LT_INTERLANE_ALIGN_DONE BIT(3)
182 #define LT_CHANNEL0_EQ_BITS (DP_CHANNEL_EQ_BITS)
183 #define DP0_SNKLTCHGREQ 0x06d4
184 #define DP0_LTLOOPCTRL 0x06d8
185 #define DP0_SNKLTCTRL 0x06e4
186
187 #define DP1_SRCCTRL 0x07a0
188
189 /* PHY */
190 #define DP_PHY_CTRL 0x0800
191 #define DP_PHY_RST BIT(28) /* DP PHY Global Soft Reset */
192 #define BGREN BIT(25) /* AUX PHY BGR Enable */
193 #define PWR_SW_EN BIT(24) /* PHY Power Switch Enable */
194 #define PHY_M1_RST BIT(12) /* Reset PHY1 Main Channel */
195 #define PHY_RDY BIT(16) /* PHY Main Channels Ready */
196 #define PHY_M0_RST BIT(8) /* Reset PHY0 Main Channel */
197 #define PHY_2LANE BIT(2) /* PHY Enable 2 lanes */
198 #define PHY_A0_EN BIT(1) /* PHY Aux Channel0 Enable */
199 #define PHY_M0_EN BIT(0) /* PHY Main Channel0 Enable */
200
201 /* PLL */
202 #define DP0_PLLCTRL 0x0900
203 #define DP1_PLLCTRL 0x0904 /* not defined in DS */
204 #define PXL_PLLCTRL 0x0908
205 #define PLLUPDATE BIT(2)
206 #define PLLBYP BIT(1)
207 #define PLLEN BIT(0)
208 #define PXL_PLLPARAM 0x0914
209 #define IN_SEL_REFCLK (0 << 14)
210 #define SYS_PLLPARAM 0x0918
211 #define REF_FREQ_38M4 (0 << 8) /* 38.4 MHz */
212 #define REF_FREQ_19M2 (1 << 8) /* 19.2 MHz */
213 #define REF_FREQ_26M (2 << 8) /* 26 MHz */
214 #define REF_FREQ_13M (3 << 8) /* 13 MHz */
215 #define SYSCLK_SEL_LSCLK (0 << 4)
216 #define LSCLK_DIV_1 (0 << 0)
217 #define LSCLK_DIV_2 (1 << 0)
218
219 /* Test & Debug */
220 #define TSTCTL 0x0a00
221 #define COLOR_R GENMASK(31, 24)
222 #define COLOR_G GENMASK(23, 16)
223 #define COLOR_B GENMASK(15, 8)
224 #define ENI2CFILTER BIT(4)
225 #define COLOR_BAR_MODE GENMASK(1, 0)
226 #define COLOR_BAR_MODE_BARS 2
227 #define PLL_DBG 0x0a04
228
229 static bool tc_test_pattern;
230 module_param_named(test, tc_test_pattern, bool, 0644);
231
232 struct tc_edp_link {
233 u8 dpcd[DP_RECEIVER_CAP_SIZE];
234 unsigned int rate;
235 u8 num_lanes;
236 u8 assr;
237 bool scrambler_dis;
238 bool spread;
239 };
240
241 struct tc_data {
242 struct device *dev;
243 struct regmap *regmap;
244 struct drm_dp_aux aux;
245
246 struct drm_bridge bridge;
247 struct drm_bridge *panel_bridge;
248 struct drm_connector connector;
249
250 /* link settings */
251 struct tc_edp_link link;
252
253 /* current mode */
254 struct drm_display_mode mode;
255
256 u32 rev;
257 u8 assr;
258
259 struct gpio_desc *sd_gpio;
260 struct gpio_desc *reset_gpio;
261 struct clk *refclk;
262
263 /* do we have IRQ */
264 bool have_irq;
265
266 /* HPD pin number (0 or 1) or -ENODEV */
267 int hpd_pin;
268 };
269
270 static inline struct tc_data *aux_to_tc(struct drm_dp_aux *a)
271 {
272 return container_of(a, struct tc_data, aux);
273 }
274
275 static inline struct tc_data *bridge_to_tc(struct drm_bridge *b)
276 {
277 return container_of(b, struct tc_data, bridge);
278 }
279
280 static inline struct tc_data *connector_to_tc(struct drm_connector *c)
281 {
282 return container_of(c, struct tc_data, connector);
283 }
284
285 static inline int tc_poll_timeout(struct tc_data *tc, unsigned int addr,
286 unsigned int cond_mask,
287 unsigned int cond_value,
288 unsigned long sleep_us, u64 timeout_us)
289 {
290 unsigned int val;
291
292 return regmap_read_poll_timeout(tc->regmap, addr, val,
293 (val & cond_mask) == cond_value,
294 sleep_us, timeout_us);
295 }
296
297 static int tc_aux_wait_busy(struct tc_data *tc)
298 {
299 return tc_poll_timeout(tc, DP0_AUXSTATUS, AUX_BUSY, 0, 100, 100000);
300 }
301
302 static int tc_aux_write_data(struct tc_data *tc, const void *data,
303 size_t size)
304 {
305 u32 auxwdata[DP_AUX_MAX_PAYLOAD_BYTES / sizeof(u32)] = { 0 };
306 int ret, count = ALIGN(size, sizeof(u32));
307
308 memcpy(auxwdata, data, size);
309
310 ret = regmap_raw_write(tc->regmap, DP0_AUXWDATA(0), auxwdata, count);
311 if (ret)
312 return ret;
313
314 return size;
315 }
316
317 static int tc_aux_read_data(struct tc_data *tc, void *data, size_t size)
318 {
319 u32 auxrdata[DP_AUX_MAX_PAYLOAD_BYTES / sizeof(u32)];
320 int ret, count = ALIGN(size, sizeof(u32));
321
322 ret = regmap_raw_read(tc->regmap, DP0_AUXRDATA(0), auxrdata, count);
323 if (ret)
324 return ret;
325
326 memcpy(data, auxrdata, size);
327
328 return size;
329 }
330
331 static u32 tc_auxcfg0(struct drm_dp_aux_msg *msg, size_t size)
332 {
333 u32 auxcfg0 = msg->request;
334
335 if (size)
336 auxcfg0 |= FIELD_PREP(DP0_AUXCFG0_BSIZE, size - 1);
337 else
338 auxcfg0 |= DP0_AUXCFG0_ADDR_ONLY;
339
340 return auxcfg0;
341 }
342
343 static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
344 struct drm_dp_aux_msg *msg)
345 {
346 struct tc_data *tc = aux_to_tc(aux);
347 size_t size = min_t(size_t, DP_AUX_MAX_PAYLOAD_BYTES - 1, msg->size);
348 u8 request = msg->request & ~DP_AUX_I2C_MOT;
349 u32 auxstatus;
350 int ret;
351
352 ret = tc_aux_wait_busy(tc);
353 if (ret)
354 return ret;
355
356 switch (request) {
357 case DP_AUX_NATIVE_READ:
358 case DP_AUX_I2C_READ:
359 break;
360 case DP_AUX_NATIVE_WRITE:
361 case DP_AUX_I2C_WRITE:
362 if (size) {
363 ret = tc_aux_write_data(tc, msg->buffer, size);
364 if (ret < 0)
365 return ret;
366 }
367 break;
368 default:
369 return -EINVAL;
370 }
371
372 /* Store address */
373 ret = regmap_write(tc->regmap, DP0_AUXADDR, msg->address);
374 if (ret)
375 return ret;
376 /* Start transfer */
377 ret = regmap_write(tc->regmap, DP0_AUXCFG0, tc_auxcfg0(msg, size));
378 if (ret)
379 return ret;
380
381 ret = tc_aux_wait_busy(tc);
382 if (ret)
383 return ret;
384
385 ret = regmap_read(tc->regmap, DP0_AUXSTATUS, &auxstatus);
386 if (ret)
387 return ret;
388
389 if (auxstatus & AUX_TIMEOUT)
390 return -ETIMEDOUT;
391 /*
392 * For some reason address-only DP_AUX_I2C_WRITE (MOT), still
393 * reports 1 byte transferred in its status. To deal we that
394 * we ignore aux_bytes field if we know that this was an
395 * address-only transfer
396 */
397 if (size)
398 size = FIELD_GET(AUX_BYTES, auxstatus);
399 msg->reply = FIELD_GET(AUX_STATUS, auxstatus);
400
401 switch (request) {
402 case DP_AUX_NATIVE_READ:
403 case DP_AUX_I2C_READ:
404 if (size)
405 return tc_aux_read_data(tc, msg->buffer, size);
406 break;
407 }
408
409 return size;
410 }
411
412 static const char * const training_pattern1_errors[] = {
413 "No errors",
414 "Aux write error",
415 "Aux read error",
416 "Max voltage reached error",
417 "Loop counter expired error",
418 "res", "res", "res"
419 };
420
421 static const char * const training_pattern2_errors[] = {
422 "No errors",
423 "Aux write error",
424 "Aux read error",
425 "Clock recovery failed error",
426 "Loop counter expired error",
427 "res", "res", "res"
428 };
429
430 static u32 tc_srcctrl(struct tc_data *tc)
431 {
432 /*
433 * No training pattern, skew lane 1 data by two LSCLK cycles with
434 * respect to lane 0 data, AutoCorrect Mode = 0
435 */
436 u32 reg = DP0_SRCCTRL_NOTP | DP0_SRCCTRL_LANESKEW | DP0_SRCCTRL_EN810B;
437
438 if (tc->link.scrambler_dis)
439 reg |= DP0_SRCCTRL_SCRMBLDIS; /* Scrambler Disabled */
440 if (tc->link.spread)
441 reg |= DP0_SRCCTRL_SSCG; /* Spread Spectrum Enable */
442 if (tc->link.num_lanes == 2)
443 reg |= DP0_SRCCTRL_LANES_2; /* Two Main Channel Lanes */
444 if (tc->link.rate != 162000)
445 reg |= DP0_SRCCTRL_BW27; /* 2.7 Gbps link */
446 return reg;
447 }
448
449 static int tc_pllupdate(struct tc_data *tc, unsigned int pllctrl)
450 {
451 int ret;
452
453 ret = regmap_write(tc->regmap, pllctrl, PLLUPDATE | PLLEN);
454 if (ret)
455 return ret;
456
457 /* Wait for PLL to lock: up to 2.09 ms, depending on refclk */
458 usleep_range(3000, 6000);
459
460 return 0;
461 }
462
463 static int tc_pxl_pll_en(struct tc_data *tc, u32 refclk, u32 pixelclock)
464 {
465 int ret;
466 int i_pre, best_pre = 1;
467 int i_post, best_post = 1;
468 int div, best_div = 1;
469 int mul, best_mul = 1;
470 int delta, best_delta;
471 int ext_div[] = {1, 2, 3, 5, 7};
472 int best_pixelclock = 0;
473 int vco_hi = 0;
474 u32 pxl_pllparam;
475
476 dev_dbg(tc->dev, "PLL: requested %d pixelclock, ref %d\n", pixelclock,
477 refclk);
478 best_delta = pixelclock;
479 /* Loop over all possible ext_divs, skipping invalid configurations */
480 for (i_pre = 0; i_pre < ARRAY_SIZE(ext_div); i_pre++) {
481 /*
482 * refclk / ext_pre_div should be in the 1 to 200 MHz range.
483 * We don't allow any refclk > 200 MHz, only check lower bounds.
484 */
485 if (refclk / ext_div[i_pre] < 1000000)
486 continue;
487 for (i_post = 0; i_post < ARRAY_SIZE(ext_div); i_post++) {
488 for (div = 1; div <= 16; div++) {
489 u32 clk;
490 u64 tmp;
491
492 tmp = pixelclock * ext_div[i_pre] *
493 ext_div[i_post] * div;
494 do_div(tmp, refclk);
495 mul = tmp;
496
497 /* Check limits */
498 if ((mul < 1) || (mul > 128))
499 continue;
500
501 clk = (refclk / ext_div[i_pre] / div) * mul;
502 /*
503 * refclk * mul / (ext_pre_div * pre_div)
504 * should be in the 150 to 650 MHz range
505 */
506 if ((clk > 650000000) || (clk < 150000000))
507 continue;
508
509 clk = clk / ext_div[i_post];
510 delta = clk - pixelclock;
511
512 if (abs(delta) < abs(best_delta)) {
513 best_pre = i_pre;
514 best_post = i_post;
515 best_div = div;
516 best_mul = mul;
517 best_delta = delta;
518 best_pixelclock = clk;
519 }
520 }
521 }
522 }
523 if (best_pixelclock == 0) {
524 dev_err(tc->dev, "Failed to calc clock for %d pixelclock\n",
525 pixelclock);
526 return -EINVAL;
527 }
528
529 dev_dbg(tc->dev, "PLL: got %d, delta %d\n", best_pixelclock,
530 best_delta);
531 dev_dbg(tc->dev, "PLL: %d / %d / %d * %d / %d\n", refclk,
532 ext_div[best_pre], best_div, best_mul, ext_div[best_post]);
533
534 /* if VCO >= 300 MHz */
535 if (refclk / ext_div[best_pre] / best_div * best_mul >= 300000000)
536 vco_hi = 1;
537 /* see DS */
538 if (best_div == 16)
539 best_div = 0;
540 if (best_mul == 128)
541 best_mul = 0;
542
543 /* Power up PLL and switch to bypass */
544 ret = regmap_write(tc->regmap, PXL_PLLCTRL, PLLBYP | PLLEN);
545 if (ret)
546 return ret;
547
548 pxl_pllparam = vco_hi << 24; /* For PLL VCO >= 300 MHz = 1 */
549 pxl_pllparam |= ext_div[best_pre] << 20; /* External Pre-divider */
550 pxl_pllparam |= ext_div[best_post] << 16; /* External Post-divider */
551 pxl_pllparam |= IN_SEL_REFCLK; /* Use RefClk as PLL input */
552 pxl_pllparam |= best_div << 8; /* Divider for PLL RefClk */
553 pxl_pllparam |= best_mul; /* Multiplier for PLL */
554
555 ret = regmap_write(tc->regmap, PXL_PLLPARAM, pxl_pllparam);
556 if (ret)
557 return ret;
558
559 /* Force PLL parameter update and disable bypass */
560 return tc_pllupdate(tc, PXL_PLLCTRL);
561 }
562
563 static int tc_pxl_pll_dis(struct tc_data *tc)
564 {
565 /* Enable PLL bypass, power down PLL */
566 return regmap_write(tc->regmap, PXL_PLLCTRL, PLLBYP);
567 }
568
569 static int tc_stream_clock_calc(struct tc_data *tc)
570 {
571 /*
572 * If the Stream clock and Link Symbol clock are
573 * asynchronous with each other, the value of M changes over
574 * time. This way of generating link clock and stream
575 * clock is called Asynchronous Clock mode. The value M
576 * must change while the value N stays constant. The
577 * value of N in this Asynchronous Clock mode must be set
578 * to 2^15 or 32,768.
579 *
580 * LSCLK = 1/10 of high speed link clock
581 *
582 * f_STRMCLK = M/N * f_LSCLK
583 * M/N = f_STRMCLK / f_LSCLK
584 *
585 */
586 return regmap_write(tc->regmap, DP0_VIDMNGEN1, 32768);
587 }
588
589 static int tc_set_syspllparam(struct tc_data *tc)
590 {
591 unsigned long rate;
592 u32 pllparam = SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
593
594 rate = clk_get_rate(tc->refclk);
595 switch (rate) {
596 case 38400000:
597 pllparam |= REF_FREQ_38M4;
598 break;
599 case 26000000:
600 pllparam |= REF_FREQ_26M;
601 break;
602 case 19200000:
603 pllparam |= REF_FREQ_19M2;
604 break;
605 case 13000000:
606 pllparam |= REF_FREQ_13M;
607 break;
608 default:
609 dev_err(tc->dev, "Invalid refclk rate: %lu Hz\n", rate);
610 return -EINVAL;
611 }
612
613 return regmap_write(tc->regmap, SYS_PLLPARAM, pllparam);
614 }
615
616 static int tc_aux_link_setup(struct tc_data *tc)
617 {
618 int ret;
619 u32 dp0_auxcfg1;
620
621 /* Setup DP-PHY / PLL */
622 ret = tc_set_syspllparam(tc);
623 if (ret)
624 goto err;
625
626 ret = regmap_write(tc->regmap, DP_PHY_CTRL,
627 BGREN | PWR_SW_EN | PHY_A0_EN);
628 if (ret)
629 goto err;
630 /*
631 * Initially PLLs are in bypass. Force PLL parameter update,
632 * disable PLL bypass, enable PLL
633 */
634 ret = tc_pllupdate(tc, DP0_PLLCTRL);
635 if (ret)
636 goto err;
637
638 ret = tc_pllupdate(tc, DP1_PLLCTRL);
639 if (ret)
640 goto err;
641
642 ret = tc_poll_timeout(tc, DP_PHY_CTRL, PHY_RDY, PHY_RDY, 100, 100000);
643 if (ret == -ETIMEDOUT) {
644 dev_err(tc->dev, "Timeout waiting for PHY to become ready");
645 return ret;
646 } else if (ret) {
647 goto err;
648 }
649
650 /* Setup AUX link */
651 dp0_auxcfg1 = AUX_RX_FILTER_EN;
652 dp0_auxcfg1 |= 0x06 << 8; /* Aux Bit Period Calculator Threshold */
653 dp0_auxcfg1 |= 0x3f << 0; /* Aux Response Timeout Timer */
654
655 ret = regmap_write(tc->regmap, DP0_AUXCFG1, dp0_auxcfg1);
656 if (ret)
657 goto err;
658
659 return 0;
660 err:
661 dev_err(tc->dev, "tc_aux_link_setup failed: %d\n", ret);
662 return ret;
663 }
664
665 static int tc_get_display_props(struct tc_data *tc)
666 {
667 u8 revision, num_lanes;
668 unsigned int rate;
669 int ret;
670 u8 reg;
671
672 /* Read DP Rx Link Capability */
673 ret = drm_dp_dpcd_read(&tc->aux, DP_DPCD_REV, tc->link.dpcd,
674 DP_RECEIVER_CAP_SIZE);
675 if (ret < 0)
676 goto err_dpcd_read;
677
678 revision = tc->link.dpcd[DP_DPCD_REV];
679 rate = drm_dp_max_link_rate(tc->link.dpcd);
680 num_lanes = drm_dp_max_lane_count(tc->link.dpcd);
681
682 if (rate != 162000 && rate != 270000) {
683 dev_dbg(tc->dev, "Falling to 2.7 Gbps rate\n");
684 rate = 270000;
685 }
686
687 tc->link.rate = rate;
688
689 if (num_lanes > 2) {
690 dev_dbg(tc->dev, "Falling to 2 lanes\n");
691 num_lanes = 2;
692 }
693
694 tc->link.num_lanes = num_lanes;
695
696 ret = drm_dp_dpcd_readb(&tc->aux, DP_MAX_DOWNSPREAD, &reg);
697 if (ret < 0)
698 goto err_dpcd_read;
699 tc->link.spread = reg & DP_MAX_DOWNSPREAD_0_5;
700
701 ret = drm_dp_dpcd_readb(&tc->aux, DP_MAIN_LINK_CHANNEL_CODING, &reg);
702 if (ret < 0)
703 goto err_dpcd_read;
704
705 tc->link.scrambler_dis = false;
706 /* read assr */
707 ret = drm_dp_dpcd_readb(&tc->aux, DP_EDP_CONFIGURATION_SET, &reg);
708 if (ret < 0)
709 goto err_dpcd_read;
710 tc->link.assr = reg & DP_ALTERNATE_SCRAMBLER_RESET_ENABLE;
711
712 dev_dbg(tc->dev, "DPCD rev: %d.%d, rate: %s, lanes: %d, framing: %s\n",
713 revision >> 4, revision & 0x0f,
714 (tc->link.rate == 162000) ? "1.62Gbps" : "2.7Gbps",
715 tc->link.num_lanes,
716 drm_dp_enhanced_frame_cap(tc->link.dpcd) ?
717 "enhanced" : "default");
718 dev_dbg(tc->dev, "Downspread: %s, scrambler: %s\n",
719 tc->link.spread ? "0.5%" : "0.0%",
720 tc->link.scrambler_dis ? "disabled" : "enabled");
721 dev_dbg(tc->dev, "Display ASSR: %d, TC358767 ASSR: %d\n",
722 tc->link.assr, tc->assr);
723
724 return 0;
725
726 err_dpcd_read:
727 dev_err(tc->dev, "failed to read DPCD: %d\n", ret);
728 return ret;
729 }
730
731 static int tc_set_video_mode(struct tc_data *tc,
732 const struct drm_display_mode *mode)
733 {
734 int ret;
735 int vid_sync_dly;
736 int max_tu_symbol;
737
738 int left_margin = mode->htotal - mode->hsync_end;
739 int right_margin = mode->hsync_start - mode->hdisplay;
740 int hsync_len = mode->hsync_end - mode->hsync_start;
741 int upper_margin = mode->vtotal - mode->vsync_end;
742 int lower_margin = mode->vsync_start - mode->vdisplay;
743 int vsync_len = mode->vsync_end - mode->vsync_start;
744 u32 dp0_syncval;
745 u32 bits_per_pixel = 24;
746 u32 in_bw, out_bw;
747
748 /*
749 * Recommended maximum number of symbols transferred in a transfer unit:
750 * DIV_ROUND_UP((input active video bandwidth in bytes) * tu_size,
751 * (output active video bandwidth in bytes))
752 * Must be less than tu_size.
753 */
754
755 in_bw = mode->clock * bits_per_pixel / 8;
756 out_bw = tc->link.num_lanes * tc->link.rate;
757 max_tu_symbol = DIV_ROUND_UP(in_bw * TU_SIZE_RECOMMENDED, out_bw);
758
759 dev_dbg(tc->dev, "set mode %dx%d\n",
760 mode->hdisplay, mode->vdisplay);
761 dev_dbg(tc->dev, "H margin %d,%d sync %d\n",
762 left_margin, right_margin, hsync_len);
763 dev_dbg(tc->dev, "V margin %d,%d sync %d\n",
764 upper_margin, lower_margin, vsync_len);
765 dev_dbg(tc->dev, "total: %dx%d\n", mode->htotal, mode->vtotal);
766
767
768 /*
769 * LCD Ctl Frame Size
770 * datasheet is not clear of vsdelay in case of DPI
771 * assume we do not need any delay when DPI is a source of
772 * sync signals
773 */
774 ret = regmap_write(tc->regmap, VPCTRL0,
775 FIELD_PREP(VSDELAY, 0) |
776 OPXLFMT_RGB888 | FRMSYNC_DISABLED | MSF_DISABLED);
777 if (ret)
778 return ret;
779
780 ret = regmap_write(tc->regmap, HTIM01,
781 FIELD_PREP(HBPR, ALIGN(left_margin, 2)) |
782 FIELD_PREP(HPW, ALIGN(hsync_len, 2)));
783 if (ret)
784 return ret;
785
786 ret = regmap_write(tc->regmap, HTIM02,
787 FIELD_PREP(HDISPR, ALIGN(mode->hdisplay, 2)) |
788 FIELD_PREP(HFPR, ALIGN(right_margin, 2)));
789 if (ret)
790 return ret;
791
792 ret = regmap_write(tc->regmap, VTIM01,
793 FIELD_PREP(VBPR, upper_margin) |
794 FIELD_PREP(VSPR, vsync_len));
795 if (ret)
796 return ret;
797
798 ret = regmap_write(tc->regmap, VTIM02,
799 FIELD_PREP(VFPR, lower_margin) |
800 FIELD_PREP(VDISPR, mode->vdisplay));
801 if (ret)
802 return ret;
803
804 ret = regmap_write(tc->regmap, VFUEN0, VFUEN); /* update settings */
805 if (ret)
806 return ret;
807
808 /* Test pattern settings */
809 ret = regmap_write(tc->regmap, TSTCTL,
810 FIELD_PREP(COLOR_R, 120) |
811 FIELD_PREP(COLOR_G, 20) |
812 FIELD_PREP(COLOR_B, 99) |
813 ENI2CFILTER |
814 FIELD_PREP(COLOR_BAR_MODE, COLOR_BAR_MODE_BARS));
815 if (ret)
816 return ret;
817
818 /* DP Main Stream Attributes */
819 vid_sync_dly = hsync_len + left_margin + mode->hdisplay;
820 ret = regmap_write(tc->regmap, DP0_VIDSYNCDELAY,
821 FIELD_PREP(THRESH_DLY, max_tu_symbol) |
822 FIELD_PREP(VID_SYNC_DLY, vid_sync_dly));
823
824 ret = regmap_write(tc->regmap, DP0_TOTALVAL,
825 FIELD_PREP(H_TOTAL, mode->htotal) |
826 FIELD_PREP(V_TOTAL, mode->vtotal));
827 if (ret)
828 return ret;
829
830 ret = regmap_write(tc->regmap, DP0_STARTVAL,
831 FIELD_PREP(H_START, left_margin + hsync_len) |
832 FIELD_PREP(V_START, upper_margin + vsync_len));
833 if (ret)
834 return ret;
835
836 ret = regmap_write(tc->regmap, DP0_ACTIVEVAL,
837 FIELD_PREP(V_ACT, mode->vdisplay) |
838 FIELD_PREP(H_ACT, mode->hdisplay));
839 if (ret)
840 return ret;
841
842 dp0_syncval = FIELD_PREP(VS_WIDTH, vsync_len) |
843 FIELD_PREP(HS_WIDTH, hsync_len);
844
845 if (mode->flags & DRM_MODE_FLAG_NVSYNC)
846 dp0_syncval |= SYNCVAL_VS_POL_ACTIVE_LOW;
847
848 if (mode->flags & DRM_MODE_FLAG_NHSYNC)
849 dp0_syncval |= SYNCVAL_HS_POL_ACTIVE_LOW;
850
851 ret = regmap_write(tc->regmap, DP0_SYNCVAL, dp0_syncval);
852 if (ret)
853 return ret;
854
855 ret = regmap_write(tc->regmap, DPIPXLFMT,
856 VS_POL_ACTIVE_LOW | HS_POL_ACTIVE_LOW |
857 DE_POL_ACTIVE_HIGH | SUB_CFG_TYPE_CONFIG1 |
858 DPI_BPP_RGB888);
859 if (ret)
860 return ret;
861
862 ret = regmap_write(tc->regmap, DP0_MISC,
863 FIELD_PREP(MAX_TU_SYMBOL, max_tu_symbol) |
864 FIELD_PREP(TU_SIZE, TU_SIZE_RECOMMENDED) |
865 BPC_8);
866 if (ret)
867 return ret;
868
869 return 0;
870 }
871
872 static int tc_wait_link_training(struct tc_data *tc)
873 {
874 u32 value;
875 int ret;
876
877 ret = tc_poll_timeout(tc, DP0_LTSTAT, LT_LOOPDONE,
878 LT_LOOPDONE, 500, 100000);
879 if (ret) {
880 dev_err(tc->dev, "Link training timeout waiting for LT_LOOPDONE!\n");
881 return ret;
882 }
883
884 ret = regmap_read(tc->regmap, DP0_LTSTAT, &value);
885 if (ret)
886 return ret;
887
888 return (value >> 8) & 0x7;
889 }
890
891 static int tc_main_link_enable(struct tc_data *tc)
892 {
893 struct drm_dp_aux *aux = &tc->aux;
894 struct device *dev = tc->dev;
895 u32 dp_phy_ctrl;
896 u32 value;
897 int ret;
898 u8 tmp[DP_LINK_STATUS_SIZE];
899
900 dev_dbg(tc->dev, "link enable\n");
901
902 ret = regmap_read(tc->regmap, DP0CTL, &value);
903 if (ret)
904 return ret;
905
906 if (WARN_ON(value & DP_EN)) {
907 ret = regmap_write(tc->regmap, DP0CTL, 0);
908 if (ret)
909 return ret;
910 }
911
912 ret = regmap_write(tc->regmap, DP0_SRCCTRL, tc_srcctrl(tc));
913 if (ret)
914 return ret;
915 /* SSCG and BW27 on DP1 must be set to the same as on DP0 */
916 ret = regmap_write(tc->regmap, DP1_SRCCTRL,
917 (tc->link.spread ? DP0_SRCCTRL_SSCG : 0) |
918 ((tc->link.rate != 162000) ? DP0_SRCCTRL_BW27 : 0));
919 if (ret)
920 return ret;
921
922 ret = tc_set_syspllparam(tc);
923 if (ret)
924 return ret;
925
926 /* Setup Main Link */
927 dp_phy_ctrl = BGREN | PWR_SW_EN | PHY_A0_EN | PHY_M0_EN;
928 if (tc->link.num_lanes == 2)
929 dp_phy_ctrl |= PHY_2LANE;
930
931 ret = regmap_write(tc->regmap, DP_PHY_CTRL, dp_phy_ctrl);
932 if (ret)
933 return ret;
934
935 /* PLL setup */
936 ret = tc_pllupdate(tc, DP0_PLLCTRL);
937 if (ret)
938 return ret;
939
940 ret = tc_pllupdate(tc, DP1_PLLCTRL);
941 if (ret)
942 return ret;
943
944 /* Reset/Enable Main Links */
945 dp_phy_ctrl |= DP_PHY_RST | PHY_M1_RST | PHY_M0_RST;
946 ret = regmap_write(tc->regmap, DP_PHY_CTRL, dp_phy_ctrl);
947 usleep_range(100, 200);
948 dp_phy_ctrl &= ~(DP_PHY_RST | PHY_M1_RST | PHY_M0_RST);
949 ret = regmap_write(tc->regmap, DP_PHY_CTRL, dp_phy_ctrl);
950
951 ret = tc_poll_timeout(tc, DP_PHY_CTRL, PHY_RDY, PHY_RDY, 500, 100000);
952 if (ret) {
953 dev_err(dev, "timeout waiting for phy become ready");
954 return ret;
955 }
956
957 /* Set misc: 8 bits per color */
958 ret = regmap_update_bits(tc->regmap, DP0_MISC, BPC_8, BPC_8);
959 if (ret)
960 return ret;
961
962 /*
963 * ASSR mode
964 * on TC358767 side ASSR configured through strap pin
965 * seems there is no way to change this setting from SW
966 *
967 * check is tc configured for same mode
968 */
969 if (tc->assr != tc->link.assr) {
970 dev_dbg(dev, "Trying to set display to ASSR: %d\n",
971 tc->assr);
972 /* try to set ASSR on display side */
973 tmp[0] = tc->assr;
974 ret = drm_dp_dpcd_writeb(aux, DP_EDP_CONFIGURATION_SET, tmp[0]);
975 if (ret < 0)
976 goto err_dpcd_read;
977 /* read back */
978 ret = drm_dp_dpcd_readb(aux, DP_EDP_CONFIGURATION_SET, tmp);
979 if (ret < 0)
980 goto err_dpcd_read;
981
982 if (tmp[0] != tc->assr) {
983 dev_dbg(dev, "Failed to switch display ASSR to %d, falling back to unscrambled mode\n",
984 tc->assr);
985 /* trying with disabled scrambler */
986 tc->link.scrambler_dis = true;
987 }
988 }
989
990 /* Setup Link & DPRx Config for Training */
991 tmp[0] = drm_dp_link_rate_to_bw_code(tc->link.rate);
992 tmp[1] = tc->link.num_lanes;
993
994 if (drm_dp_enhanced_frame_cap(tc->link.dpcd))
995 tmp[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
996
997 ret = drm_dp_dpcd_write(aux, DP_LINK_BW_SET, tmp, 2);
998 if (ret < 0)
999 goto err_dpcd_write;
1000
1001 /* DOWNSPREAD_CTRL */
1002 tmp[0] = tc->link.spread ? DP_SPREAD_AMP_0_5 : 0x00;
1003 /* MAIN_LINK_CHANNEL_CODING_SET */
1004 tmp[1] = DP_SET_ANSI_8B10B;
1005 ret = drm_dp_dpcd_write(aux, DP_DOWNSPREAD_CTRL, tmp, 2);
1006 if (ret < 0)
1007 goto err_dpcd_write;
1008
1009 /* Reset voltage-swing & pre-emphasis */
1010 tmp[0] = tmp[1] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 |
1011 DP_TRAIN_PRE_EMPH_LEVEL_0;
1012 ret = drm_dp_dpcd_write(aux, DP_TRAINING_LANE0_SET, tmp, 2);
1013 if (ret < 0)
1014 goto err_dpcd_write;
1015
1016 /* Clock-Recovery */
1017
1018 /* Set DPCD 0x102 for Training Pattern 1 */
1019 ret = regmap_write(tc->regmap, DP0_SNKLTCTRL,
1020 DP_LINK_SCRAMBLING_DISABLE |
1021 DP_TRAINING_PATTERN_1);
1022 if (ret)
1023 return ret;
1024
1025 ret = regmap_write(tc->regmap, DP0_LTLOOPCTRL,
1026 (15 << 28) | /* Defer Iteration Count */
1027 (15 << 24) | /* Loop Iteration Count */
1028 (0xd << 0)); /* Loop Timer Delay */
1029 if (ret)
1030 return ret;
1031
1032 ret = regmap_write(tc->regmap, DP0_SRCCTRL,
1033 tc_srcctrl(tc) | DP0_SRCCTRL_SCRMBLDIS |
1034 DP0_SRCCTRL_AUTOCORRECT |
1035 DP0_SRCCTRL_TP1);
1036 if (ret)
1037 return ret;
1038
1039 /* Enable DP0 to start Link Training */
1040 ret = regmap_write(tc->regmap, DP0CTL,
1041 (drm_dp_enhanced_frame_cap(tc->link.dpcd) ?
1042 EF_EN : 0) | DP_EN);
1043 if (ret)
1044 return ret;
1045
1046 /* wait */
1047
1048 ret = tc_wait_link_training(tc);
1049 if (ret < 0)
1050 return ret;
1051
1052 if (ret) {
1053 dev_err(tc->dev, "Link training phase 1 failed: %s\n",
1054 training_pattern1_errors[ret]);
1055 return -ENODEV;
1056 }
1057
1058 /* Channel Equalization */
1059
1060 /* Set DPCD 0x102 for Training Pattern 2 */
1061 ret = regmap_write(tc->regmap, DP0_SNKLTCTRL,
1062 DP_LINK_SCRAMBLING_DISABLE |
1063 DP_TRAINING_PATTERN_2);
1064 if (ret)
1065 return ret;
1066
1067 ret = regmap_write(tc->regmap, DP0_SRCCTRL,
1068 tc_srcctrl(tc) | DP0_SRCCTRL_SCRMBLDIS |
1069 DP0_SRCCTRL_AUTOCORRECT |
1070 DP0_SRCCTRL_TP2);
1071 if (ret)
1072 return ret;
1073
1074 /* wait */
1075 ret = tc_wait_link_training(tc);
1076 if (ret < 0)
1077 return ret;
1078
1079 if (ret) {
1080 dev_err(tc->dev, "Link training phase 2 failed: %s\n",
1081 training_pattern2_errors[ret]);
1082 return -ENODEV;
1083 }
1084
1085 /*
1086 * Toshiba's documentation suggests to first clear DPCD 0x102, then
1087 * clear the training pattern bit in DP0_SRCCTRL. Testing shows
1088 * that the link sometimes drops if those steps are done in that order,
1089 * but if the steps are done in reverse order, the link stays up.
1090 *
1091 * So we do the steps differently than documented here.
1092 */
1093
1094 /* Clear Training Pattern, set AutoCorrect Mode = 1 */
1095 ret = regmap_write(tc->regmap, DP0_SRCCTRL, tc_srcctrl(tc) |
1096 DP0_SRCCTRL_AUTOCORRECT);
1097 if (ret)
1098 return ret;
1099
1100 /* Clear DPCD 0x102 */
1101 /* Note: Can Not use DP0_SNKLTCTRL (0x06E4) short cut */
1102 tmp[0] = tc->link.scrambler_dis ? DP_LINK_SCRAMBLING_DISABLE : 0x00;
1103 ret = drm_dp_dpcd_writeb(aux, DP_TRAINING_PATTERN_SET, tmp[0]);
1104 if (ret < 0)
1105 goto err_dpcd_write;
1106
1107 /* Check link status */
1108 ret = drm_dp_dpcd_read_link_status(aux, tmp);
1109 if (ret < 0)
1110 goto err_dpcd_read;
1111
1112 ret = 0;
1113
1114 value = tmp[0] & DP_CHANNEL_EQ_BITS;
1115
1116 if (value != DP_CHANNEL_EQ_BITS) {
1117 dev_err(tc->dev, "Lane 0 failed: %x\n", value);
1118 ret = -ENODEV;
1119 }
1120
1121 if (tc->link.num_lanes == 2) {
1122 value = (tmp[0] >> 4) & DP_CHANNEL_EQ_BITS;
1123
1124 if (value != DP_CHANNEL_EQ_BITS) {
1125 dev_err(tc->dev, "Lane 1 failed: %x\n", value);
1126 ret = -ENODEV;
1127 }
1128
1129 if (!(tmp[2] & DP_INTERLANE_ALIGN_DONE)) {
1130 dev_err(tc->dev, "Interlane align failed\n");
1131 ret = -ENODEV;
1132 }
1133 }
1134
1135 if (ret) {
1136 dev_err(dev, "0x0202 LANE0_1_STATUS: 0x%02x\n", tmp[0]);
1137 dev_err(dev, "0x0203 LANE2_3_STATUS 0x%02x\n", tmp[1]);
1138 dev_err(dev, "0x0204 LANE_ALIGN_STATUS_UPDATED: 0x%02x\n", tmp[2]);
1139 dev_err(dev, "0x0205 SINK_STATUS: 0x%02x\n", tmp[3]);
1140 dev_err(dev, "0x0206 ADJUST_REQUEST_LANE0_1: 0x%02x\n", tmp[4]);
1141 dev_err(dev, "0x0207 ADJUST_REQUEST_LANE2_3: 0x%02x\n", tmp[5]);
1142 return ret;
1143 }
1144
1145 return 0;
1146 err_dpcd_read:
1147 dev_err(tc->dev, "Failed to read DPCD: %d\n", ret);
1148 return ret;
1149 err_dpcd_write:
1150 dev_err(tc->dev, "Failed to write DPCD: %d\n", ret);
1151 return ret;
1152 }
1153
1154 static int tc_main_link_disable(struct tc_data *tc)
1155 {
1156 int ret;
1157
1158 dev_dbg(tc->dev, "link disable\n");
1159
1160 ret = regmap_write(tc->regmap, DP0_SRCCTRL, 0);
1161 if (ret)
1162 return ret;
1163
1164 return regmap_write(tc->regmap, DP0CTL, 0);
1165 }
1166
1167 static int tc_stream_enable(struct tc_data *tc)
1168 {
1169 int ret;
1170 u32 value;
1171
1172 dev_dbg(tc->dev, "enable video stream\n");
1173
1174 /* PXL PLL setup */
1175 if (tc_test_pattern) {
1176 ret = tc_pxl_pll_en(tc, clk_get_rate(tc->refclk),
1177 1000 * tc->mode.clock);
1178 if (ret)
1179 return ret;
1180 }
1181
1182 ret = tc_set_video_mode(tc, &tc->mode);
1183 if (ret)
1184 return ret;
1185
1186 /* Set M/N */
1187 ret = tc_stream_clock_calc(tc);
1188 if (ret)
1189 return ret;
1190
1191 value = VID_MN_GEN | DP_EN;
1192 if (drm_dp_enhanced_frame_cap(tc->link.dpcd))
1193 value |= EF_EN;
1194 ret = regmap_write(tc->regmap, DP0CTL, value);
1195 if (ret)
1196 return ret;
1197 /*
1198 * VID_EN assertion should be delayed by at least N * LSCLK
1199 * cycles from the time VID_MN_GEN is enabled in order to
1200 * generate stable values for VID_M. LSCLK is 270 MHz or
1201 * 162 MHz, VID_N is set to 32768 in tc_stream_clock_calc(),
1202 * so a delay of at least 203 us should suffice.
1203 */
1204 usleep_range(500, 1000);
1205 value |= VID_EN;
1206 ret = regmap_write(tc->regmap, DP0CTL, value);
1207 if (ret)
1208 return ret;
1209 /* Set input interface */
1210 value = DP0_AUDSRC_NO_INPUT;
1211 if (tc_test_pattern)
1212 value |= DP0_VIDSRC_COLOR_BAR;
1213 else
1214 value |= DP0_VIDSRC_DPI_RX;
1215 ret = regmap_write(tc->regmap, SYSCTRL, value);
1216 if (ret)
1217 return ret;
1218
1219 return 0;
1220 }
1221
1222 static int tc_stream_disable(struct tc_data *tc)
1223 {
1224 int ret;
1225
1226 dev_dbg(tc->dev, "disable video stream\n");
1227
1228 ret = regmap_update_bits(tc->regmap, DP0CTL, VID_EN, 0);
1229 if (ret)
1230 return ret;
1231
1232 tc_pxl_pll_dis(tc);
1233
1234 return 0;
1235 }
1236
1237 static void tc_bridge_enable(struct drm_bridge *bridge)
1238 {
1239 struct tc_data *tc = bridge_to_tc(bridge);
1240 int ret;
1241
1242 ret = tc_get_display_props(tc);
1243 if (ret < 0) {
1244 dev_err(tc->dev, "failed to read display props: %d\n", ret);
1245 return;
1246 }
1247
1248 ret = tc_main_link_enable(tc);
1249 if (ret < 0) {
1250 dev_err(tc->dev, "main link enable error: %d\n", ret);
1251 return;
1252 }
1253
1254 ret = tc_stream_enable(tc);
1255 if (ret < 0) {
1256 dev_err(tc->dev, "main link stream start error: %d\n", ret);
1257 tc_main_link_disable(tc);
1258 return;
1259 }
1260 }
1261
1262 static void tc_bridge_disable(struct drm_bridge *bridge)
1263 {
1264 struct tc_data *tc = bridge_to_tc(bridge);
1265 int ret;
1266
1267 ret = tc_stream_disable(tc);
1268 if (ret < 0)
1269 dev_err(tc->dev, "main link stream stop error: %d\n", ret);
1270
1271 ret = tc_main_link_disable(tc);
1272 if (ret < 0)
1273 dev_err(tc->dev, "main link disable error: %d\n", ret);
1274 }
1275
1276 static bool tc_bridge_mode_fixup(struct drm_bridge *bridge,
1277 const struct drm_display_mode *mode,
1278 struct drm_display_mode *adj)
1279 {
1280 /* Fixup sync polarities, both hsync and vsync are active low */
1281 adj->flags = mode->flags;
1282 adj->flags |= (DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC);
1283 adj->flags &= ~(DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC);
1284
1285 return true;
1286 }
1287
1288 static enum drm_mode_status tc_mode_valid(struct drm_bridge *bridge,
1289 const struct drm_display_info *info,
1290 const struct drm_display_mode *mode)
1291 {
1292 struct tc_data *tc = bridge_to_tc(bridge);
1293 u32 req, avail;
1294 u32 bits_per_pixel = 24;
1295
1296 /* DPI interface clock limitation: upto 154 MHz */
1297 if (mode->clock > 154000)
1298 return MODE_CLOCK_HIGH;
1299
1300 req = mode->clock * bits_per_pixel / 8;
1301 avail = tc->link.num_lanes * tc->link.rate;
1302
1303 if (req > avail)
1304 return MODE_BAD;
1305
1306 return MODE_OK;
1307 }
1308
1309 static void tc_bridge_mode_set(struct drm_bridge *bridge,
1310 const struct drm_display_mode *mode,
1311 const struct drm_display_mode *adj)
1312 {
1313 struct tc_data *tc = bridge_to_tc(bridge);
1314
1315 tc->mode = *mode;
1316 }
1317
1318 static struct edid *tc_get_edid(struct drm_bridge *bridge,
1319 struct drm_connector *connector)
1320 {
1321 struct tc_data *tc = bridge_to_tc(bridge);
1322
1323 return drm_get_edid(connector, &tc->aux.ddc);
1324 }
1325
1326 static int tc_connector_get_modes(struct drm_connector *connector)
1327 {
1328 struct tc_data *tc = connector_to_tc(connector);
1329 int num_modes;
1330 struct edid *edid;
1331 int ret;
1332
1333 ret = tc_get_display_props(tc);
1334 if (ret < 0) {
1335 dev_err(tc->dev, "failed to read display props: %d\n", ret);
1336 return 0;
1337 }
1338
1339 if (tc->panel_bridge) {
1340 num_modes = drm_bridge_get_modes(tc->panel_bridge, connector);
1341 if (num_modes > 0)
1342 return num_modes;
1343 }
1344
1345 edid = tc_get_edid(&tc->bridge, connector);
1346 num_modes = drm_add_edid_modes(connector, edid);
1347 kfree(edid);
1348
1349 return num_modes;
1350 }
1351
1352 static const struct drm_connector_helper_funcs tc_connector_helper_funcs = {
1353 .get_modes = tc_connector_get_modes,
1354 };
1355
1356 static enum drm_connector_status tc_bridge_detect(struct drm_bridge *bridge)
1357 {
1358 struct tc_data *tc = bridge_to_tc(bridge);
1359 bool conn;
1360 u32 val;
1361 int ret;
1362
1363 ret = regmap_read(tc->regmap, GPIOI, &val);
1364 if (ret)
1365 return connector_status_unknown;
1366
1367 conn = val & BIT(tc->hpd_pin);
1368
1369 if (conn)
1370 return connector_status_connected;
1371 else
1372 return connector_status_disconnected;
1373 }
1374
1375 static enum drm_connector_status
1376 tc_connector_detect(struct drm_connector *connector, bool force)
1377 {
1378 struct tc_data *tc = connector_to_tc(connector);
1379
1380 if (tc->hpd_pin >= 0)
1381 return tc_bridge_detect(&tc->bridge);
1382
1383 if (tc->panel_bridge)
1384 return connector_status_connected;
1385 else
1386 return connector_status_unknown;
1387 }
1388
1389 static const struct drm_connector_funcs tc_connector_funcs = {
1390 .detect = tc_connector_detect,
1391 .fill_modes = drm_helper_probe_single_connector_modes,
1392 .destroy = drm_connector_cleanup,
1393 .reset = drm_atomic_helper_connector_reset,
1394 .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
1395 .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
1396 };
1397
1398 static int tc_bridge_attach(struct drm_bridge *bridge,
1399 enum drm_bridge_attach_flags flags)
1400 {
1401 u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
1402 struct tc_data *tc = bridge_to_tc(bridge);
1403 struct drm_device *drm = bridge->dev;
1404 int ret;
1405
1406 if (tc->panel_bridge) {
1407 /* If a connector is required then this driver shall create it */
1408 ret = drm_bridge_attach(tc->bridge.encoder, tc->panel_bridge,
1409 &tc->bridge, flags | DRM_BRIDGE_ATTACH_NO_CONNECTOR);
1410 if (ret)
1411 return ret;
1412 }
1413
1414 if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)
1415 return 0;
1416
1417 /* Create DP/eDP connector */
1418 drm_connector_helper_add(&tc->connector, &tc_connector_helper_funcs);
1419 ret = drm_connector_init(drm, &tc->connector, &tc_connector_funcs, tc->bridge.type);
1420 if (ret)
1421 return ret;
1422
1423 /* Don't poll if don't have HPD connected */
1424 if (tc->hpd_pin >= 0) {
1425 if (tc->have_irq)
1426 tc->connector.polled = DRM_CONNECTOR_POLL_HPD;
1427 else
1428 tc->connector.polled = DRM_CONNECTOR_POLL_CONNECT |
1429 DRM_CONNECTOR_POLL_DISCONNECT;
1430 }
1431
1432 drm_display_info_set_bus_formats(&tc->connector.display_info,
1433 &bus_format, 1);
1434 tc->connector.display_info.bus_flags =
1435 DRM_BUS_FLAG_DE_HIGH |
1436 DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE |
1437 DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE;
1438 drm_connector_attach_encoder(&tc->connector, tc->bridge.encoder);
1439
1440 return 0;
1441 }
1442
1443 static const struct drm_bridge_funcs tc_bridge_funcs = {
1444 .attach = tc_bridge_attach,
1445 .mode_valid = tc_mode_valid,
1446 .mode_set = tc_bridge_mode_set,
1447 .enable = tc_bridge_enable,
1448 .disable = tc_bridge_disable,
1449 .mode_fixup = tc_bridge_mode_fixup,
1450 .detect = tc_bridge_detect,
1451 .get_edid = tc_get_edid,
1452 };
1453
1454 static bool tc_readable_reg(struct device *dev, unsigned int reg)
1455 {
1456 return reg != SYSCTRL;
1457 }
1458
1459 static const struct regmap_range tc_volatile_ranges[] = {
1460 regmap_reg_range(DP0_AUXWDATA(0), DP0_AUXSTATUS),
1461 regmap_reg_range(DP0_LTSTAT, DP0_SNKLTCHGREQ),
1462 regmap_reg_range(DP_PHY_CTRL, DP_PHY_CTRL),
1463 regmap_reg_range(DP0_PLLCTRL, PXL_PLLCTRL),
1464 regmap_reg_range(VFUEN0, VFUEN0),
1465 regmap_reg_range(INTSTS_G, INTSTS_G),
1466 regmap_reg_range(GPIOI, GPIOI),
1467 };
1468
1469 static const struct regmap_access_table tc_volatile_table = {
1470 .yes_ranges = tc_volatile_ranges,
1471 .n_yes_ranges = ARRAY_SIZE(tc_volatile_ranges),
1472 };
1473
1474 static bool tc_writeable_reg(struct device *dev, unsigned int reg)
1475 {
1476 return (reg != TC_IDREG) &&
1477 (reg != DP0_LTSTAT) &&
1478 (reg != DP0_SNKLTCHGREQ);
1479 }
1480
1481 static const struct regmap_config tc_regmap_config = {
1482 .name = "tc358767",
1483 .reg_bits = 16,
1484 .val_bits = 32,
1485 .reg_stride = 4,
1486 .max_register = PLL_DBG,
1487 .cache_type = REGCACHE_RBTREE,
1488 .readable_reg = tc_readable_reg,
1489 .volatile_table = &tc_volatile_table,
1490 .writeable_reg = tc_writeable_reg,
1491 .reg_format_endian = REGMAP_ENDIAN_BIG,
1492 .val_format_endian = REGMAP_ENDIAN_LITTLE,
1493 };
1494
1495 static irqreturn_t tc_irq_handler(int irq, void *arg)
1496 {
1497 struct tc_data *tc = arg;
1498 u32 val;
1499 int r;
1500
1501 r = regmap_read(tc->regmap, INTSTS_G, &val);
1502 if (r)
1503 return IRQ_NONE;
1504
1505 if (!val)
1506 return IRQ_NONE;
1507
1508 if (val & INT_SYSERR) {
1509 u32 stat = 0;
1510
1511 regmap_read(tc->regmap, SYSSTAT, &stat);
1512
1513 dev_err(tc->dev, "syserr %x\n", stat);
1514 }
1515
1516 if (tc->hpd_pin >= 0 && tc->bridge.dev) {
1517 /*
1518 * H is triggered when the GPIO goes high.
1519 *
1520 * LC is triggered when the GPIO goes low and stays low for
1521 * the duration of LCNT
1522 */
1523 bool h = val & INT_GPIO_H(tc->hpd_pin);
1524 bool lc = val & INT_GPIO_LC(tc->hpd_pin);
1525
1526 dev_dbg(tc->dev, "GPIO%d: %s %s\n", tc->hpd_pin,
1527 h ? "H" : "", lc ? "LC" : "");
1528
1529 if (h || lc)
1530 drm_kms_helper_hotplug_event(tc->bridge.dev);
1531 }
1532
1533 regmap_write(tc->regmap, INTSTS_G, val);
1534
1535 return IRQ_HANDLED;
1536 }
1537
1538 static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
1539 {
1540 struct device *dev = &client->dev;
1541 struct drm_panel *panel;
1542 struct tc_data *tc;
1543 int ret;
1544
1545 tc = devm_kzalloc(dev, sizeof(*tc), GFP_KERNEL);
1546 if (!tc)
1547 return -ENOMEM;
1548
1549 tc->dev = dev;
1550
1551 /* port@2 is the output port */
1552 ret = drm_of_find_panel_or_bridge(dev->of_node, 2, 0, &panel, NULL);
1553 if (ret && ret != -ENODEV)
1554 return ret;
1555
1556 if (panel) {
1557 struct drm_bridge *panel_bridge;
1558
1559 panel_bridge = devm_drm_panel_bridge_add(dev, panel);
1560 if (IS_ERR(panel_bridge))
1561 return PTR_ERR(panel_bridge);
1562
1563 tc->panel_bridge = panel_bridge;
1564 tc->bridge.type = DRM_MODE_CONNECTOR_eDP;
1565 } else {
1566 tc->bridge.type = DRM_MODE_CONNECTOR_DisplayPort;
1567 }
1568
1569 /* Shut down GPIO is optional */
1570 tc->sd_gpio = devm_gpiod_get_optional(dev, "shutdown", GPIOD_OUT_HIGH);
1571 if (IS_ERR(tc->sd_gpio))
1572 return PTR_ERR(tc->sd_gpio);
1573
1574 if (tc->sd_gpio) {
1575 gpiod_set_value_cansleep(tc->sd_gpio, 0);
1576 usleep_range(5000, 10000);
1577 }
1578
1579 /* Reset GPIO is optional */
1580 tc->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
1581 if (IS_ERR(tc->reset_gpio))
1582 return PTR_ERR(tc->reset_gpio);
1583
1584 if (tc->reset_gpio) {
1585 gpiod_set_value_cansleep(tc->reset_gpio, 1);
1586 usleep_range(5000, 10000);
1587 }
1588
1589 tc->refclk = devm_clk_get(dev, "ref");
1590 if (IS_ERR(tc->refclk)) {
1591 ret = PTR_ERR(tc->refclk);
1592 dev_err(dev, "Failed to get refclk: %d\n", ret);
1593 return ret;
1594 }
1595
1596 tc->regmap = devm_regmap_init_i2c(client, &tc_regmap_config);
1597 if (IS_ERR(tc->regmap)) {
1598 ret = PTR_ERR(tc->regmap);
1599 dev_err(dev, "Failed to initialize regmap: %d\n", ret);
1600 return ret;
1601 }
1602
1603 ret = of_property_read_u32(dev->of_node, "toshiba,hpd-pin",
1604 &tc->hpd_pin);
1605 if (ret) {
1606 tc->hpd_pin = -ENODEV;
1607 } else {
1608 if (tc->hpd_pin < 0 || tc->hpd_pin > 1) {
1609 dev_err(dev, "failed to parse HPD number\n");
1610 return ret;
1611 }
1612 }
1613
1614 if (client->irq > 0) {
1615 /* enable SysErr */
1616 regmap_write(tc->regmap, INTCTL_G, INT_SYSERR);
1617
1618 ret = devm_request_threaded_irq(dev, client->irq,
1619 NULL, tc_irq_handler,
1620 IRQF_ONESHOT,
1621 "tc358767-irq", tc);
1622 if (ret) {
1623 dev_err(dev, "failed to register dp interrupt\n");
1624 return ret;
1625 }
1626
1627 tc->have_irq = true;
1628 }
1629
1630 ret = regmap_read(tc->regmap, TC_IDREG, &tc->rev);
1631 if (ret) {
1632 dev_err(tc->dev, "can not read device ID: %d\n", ret);
1633 return ret;
1634 }
1635
1636 if ((tc->rev != 0x6601) && (tc->rev != 0x6603)) {
1637 dev_err(tc->dev, "invalid device ID: 0x%08x\n", tc->rev);
1638 return -EINVAL;
1639 }
1640
1641 tc->assr = (tc->rev == 0x6601); /* Enable ASSR for eDP panels */
1642
1643 if (!tc->reset_gpio) {
1644 /*
1645 * If the reset pin isn't present, do a software reset. It isn't
1646 * as thorough as the hardware reset, as we can't reset the I2C
1647 * communication block for obvious reasons, but it's getting the
1648 * chip into a defined state.
1649 */
1650 regmap_update_bits(tc->regmap, SYSRSTENB,
1651 ENBLCD0 | ENBBM | ENBDSIRX | ENBREG | ENBHDCP,
1652 0);
1653 regmap_update_bits(tc->regmap, SYSRSTENB,
1654 ENBLCD0 | ENBBM | ENBDSIRX | ENBREG | ENBHDCP,
1655 ENBLCD0 | ENBBM | ENBDSIRX | ENBREG | ENBHDCP);
1656 usleep_range(5000, 10000);
1657 }
1658
1659 if (tc->hpd_pin >= 0) {
1660 u32 lcnt_reg = tc->hpd_pin == 0 ? INT_GP0_LCNT : INT_GP1_LCNT;
1661 u32 h_lc = INT_GPIO_H(tc->hpd_pin) | INT_GPIO_LC(tc->hpd_pin);
1662
1663 /* Set LCNT to 2ms */
1664 regmap_write(tc->regmap, lcnt_reg,
1665 clk_get_rate(tc->refclk) * 2 / 1000);
1666 /* We need the "alternate" mode for HPD */
1667 regmap_write(tc->regmap, GPIOM, BIT(tc->hpd_pin));
1668
1669 if (tc->have_irq) {
1670 /* enable H & LC */
1671 regmap_update_bits(tc->regmap, INTCTL_G, h_lc, h_lc);
1672 }
1673 }
1674
1675 ret = tc_aux_link_setup(tc);
1676 if (ret)
1677 return ret;
1678
1679 /* Register DP AUX channel */
1680 tc->aux.name = "TC358767 AUX i2c adapter";
1681 tc->aux.dev = tc->dev;
1682 tc->aux.transfer = tc_aux_transfer;
1683 ret = drm_dp_aux_register(&tc->aux);
1684 if (ret)
1685 return ret;
1686
1687 tc->bridge.funcs = &tc_bridge_funcs;
1688 if (tc->hpd_pin >= 0)
1689 tc->bridge.ops |= DRM_BRIDGE_OP_DETECT;
1690 tc->bridge.ops |= DRM_BRIDGE_OP_EDID;
1691
1692 tc->bridge.of_node = dev->of_node;
1693 drm_bridge_add(&tc->bridge);
1694
1695 i2c_set_clientdata(client, tc);
1696
1697 return 0;
1698 }
1699
1700 static int tc_remove(struct i2c_client *client)
1701 {
1702 struct tc_data *tc = i2c_get_clientdata(client);
1703
1704 drm_bridge_remove(&tc->bridge);
1705 drm_dp_aux_unregister(&tc->aux);
1706
1707 return 0;
1708 }
1709
1710 static const struct i2c_device_id tc358767_i2c_ids[] = {
1711 { "tc358767", 0 },
1712 { }
1713 };
1714 MODULE_DEVICE_TABLE(i2c, tc358767_i2c_ids);
1715
1716 static const struct of_device_id tc358767_of_ids[] = {
1717 { .compatible = "toshiba,tc358767", },
1718 { }
1719 };
1720 MODULE_DEVICE_TABLE(of, tc358767_of_ids);
1721
1722 static struct i2c_driver tc358767_driver = {
1723 .driver = {
1724 .name = "tc358767",
1725 .of_match_table = tc358767_of_ids,
1726 },
1727 .id_table = tc358767_i2c_ids,
1728 .probe = tc_probe,
1729 .remove = tc_remove,
1730 };
1731 module_i2c_driver(tc358767_driver);
1732
1733 MODULE_AUTHOR("Andrey Gusakov <andrey.gusakov@cogentembedded.com>");
1734 MODULE_DESCRIPTION("tc358767 eDP encoder driver");
1735 MODULE_LICENSE("GPL");
Linux with added FPC-III support