Merge tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block

[linux/fpc-iii.git] / drivers / gpu / drm / msm / disp / dpu1 / dpu_encoder_phys.h

/* SPDX-License-Identifier: GPL-2.0-only */
/*
 * Copyright (c) 2015-2018 The Linux Foundation. All rights reserved.
 */

#ifndef __DPU_ENCODER_PHYS_H__
#define __DPU_ENCODER_PHYS_H__

#include <linux/jiffies.h>

#include "dpu_kms.h"
#include "dpu_hw_intf.h"
#include "dpu_hw_pingpong.h"
#include "dpu_hw_ctl.h"
#include "dpu_hw_top.h"
#include "dpu_encoder.h"
#include "dpu_crtc.h"

#define DPU_ENCODER_NAME_MAX    16

/* wait for at most 2 vsync for lowest refresh rate (24hz) */
#define KICKOFF_TIMEOUT_MS              84
#define KICKOFF_TIMEOUT_JIFFIES         msecs_to_jiffies(KICKOFF_TIMEOUT_MS)

/**
 * enum dpu_enc_split_role - Role this physical encoder will play in a
 *      split-panel configuration, where one panel is master, and others slaves.
 *      Masters have extra responsibilities, like managing the VBLANK IRQ.
 * @ENC_ROLE_SOLO:      This is the one and only panel. This encoder is master.
 * @ENC_ROLE_MASTER:    This encoder is the master of a split panel config.
 * @ENC_ROLE_SLAVE:     This encoder is not the master of a split panel config.
 */
enum dpu_enc_split_role {
        ENC_ROLE_SOLO,
        ENC_ROLE_MASTER,
        ENC_ROLE_SLAVE,
};

/**
 * enum dpu_enc_enable_state - current enabled state of the physical encoder
 * @DPU_ENC_DISABLING:  Encoder transitioning to disable state
 *                      Events bounding transition are encoder type specific
 * @DPU_ENC_DISABLED:   Encoder is disabled
 * @DPU_ENC_ENABLING:   Encoder transitioning to enabled
 *                      Events bounding transition are encoder type specific
 * @DPU_ENC_ENABLED:    Encoder is enabled
 * @DPU_ENC_ERR_NEEDS_HW_RESET: Encoder is enabled, but requires a hw_reset
 *                              to recover from a previous error
 */
enum dpu_enc_enable_state {
        DPU_ENC_DISABLING,
        DPU_ENC_DISABLED,
        DPU_ENC_ENABLING,
        DPU_ENC_ENABLED,
        DPU_ENC_ERR_NEEDS_HW_RESET
};

struct dpu_encoder_phys;

/**
 * struct dpu_encoder_virt_ops - Interface the containing virtual encoder
 *      provides for the physical encoders to use to callback.
 * @handle_vblank_virt: Notify virtual encoder of vblank IRQ reception
 *                      Note: This is called from IRQ handler context.
 * @handle_underrun_virt: Notify virtual encoder of underrun IRQ reception
 *                      Note: This is called from IRQ handler context.
 * @handle_frame_done:  Notify virtual encoder that this phys encoder
 *                      completes last request frame.
 */
struct dpu_encoder_virt_ops {
        void (*handle_vblank_virt)(struct drm_encoder *,
                        struct dpu_encoder_phys *phys);
        void (*handle_underrun_virt)(struct drm_encoder *,
                        struct dpu_encoder_phys *phys);
        void (*handle_frame_done)(struct drm_encoder *,
                        struct dpu_encoder_phys *phys, u32 event);
};

/**
 * struct dpu_encoder_phys_ops - Interface the physical encoders provide to
 *      the containing virtual encoder.
 * @late_register:              DRM Call. Add Userspace interfaces, debugfs.
 * @prepare_commit:             MSM Atomic Call, start of atomic commit sequence
 * @is_master:                  Whether this phys_enc is the current master
 *                              encoder. Can be switched at enable time. Based
 *                              on split_role and current mode (CMD/VID).
 * @mode_fixup:                 DRM Call. Fixup a DRM mode.
 * @mode_set:                   DRM Call. Set a DRM mode.
 *                              This likely caches the mode, for use at enable.
 * @enable:                     DRM Call. Enable a DRM mode.
 * @disable:                    DRM Call. Disable mode.
 * @atomic_check:               DRM Call. Atomic check new DRM state.
 * @destroy:                    DRM Call. Destroy and release resources.
 * @get_hw_resources:           Populate the structure with the hardware
 *                              resources that this phys_enc is using.
 *                              Expect no overlap between phys_encs.
 * @control_vblank_irq          Register/Deregister for VBLANK IRQ
 * @wait_for_commit_done:       Wait for hardware to have flushed the
 *                              current pending frames to hardware
 * @wait_for_tx_complete:       Wait for hardware to transfer the pixels
 *                              to the panel
 * @wait_for_vblank:            Wait for VBLANK, for sub-driver internal use
 * @prepare_for_kickoff:        Do any work necessary prior to a kickoff
 *                              For CMD encoder, may wait for previous tx done
 * @handle_post_kickoff:        Do any work necessary post-kickoff work
 * @trigger_start:              Process start event on physical encoder
 * @needs_single_flush:         Whether encoder slaves need to be flushed
 * @irq_control:                Handler to enable/disable all the encoder IRQs
 * @prepare_idle_pc:            phys encoder can update the vsync_enable status
 *                              on idle power collapse prepare
 * @restore:                    Restore all the encoder configs.
 * @get_line_count:             Obtain current vertical line count
 */

struct dpu_encoder_phys_ops {
        int (*late_register)(struct dpu_encoder_phys *encoder,
                        struct dentry *debugfs_root);
        void (*prepare_commit)(struct dpu_encoder_phys *encoder);
        bool (*is_master)(struct dpu_encoder_phys *encoder);
        bool (*mode_fixup)(struct dpu_encoder_phys *encoder,
                        const struct drm_display_mode *mode,
                        struct drm_display_mode *adjusted_mode);
        void (*mode_set)(struct dpu_encoder_phys *encoder,
                        struct drm_display_mode *mode,
                        struct drm_display_mode *adjusted_mode);
        void (*enable)(struct dpu_encoder_phys *encoder);
        void (*disable)(struct dpu_encoder_phys *encoder);
        int (*atomic_check)(struct dpu_encoder_phys *encoder,
                            struct drm_crtc_state *crtc_state,
                            struct drm_connector_state *conn_state);
        void (*destroy)(struct dpu_encoder_phys *encoder);
        void (*get_hw_resources)(struct dpu_encoder_phys *encoder,
                                 struct dpu_encoder_hw_resources *hw_res);
        int (*control_vblank_irq)(struct dpu_encoder_phys *enc, bool enable);
        int (*wait_for_commit_done)(struct dpu_encoder_phys *phys_enc);
        int (*wait_for_tx_complete)(struct dpu_encoder_phys *phys_enc);
        int (*wait_for_vblank)(struct dpu_encoder_phys *phys_enc);
        void (*prepare_for_kickoff)(struct dpu_encoder_phys *phys_enc);
        void (*handle_post_kickoff)(struct dpu_encoder_phys *phys_enc);
        void (*trigger_start)(struct dpu_encoder_phys *phys_enc);
        bool (*needs_single_flush)(struct dpu_encoder_phys *phys_enc);
        void (*irq_control)(struct dpu_encoder_phys *phys, bool enable);
        void (*prepare_idle_pc)(struct dpu_encoder_phys *phys_enc);
        void (*restore)(struct dpu_encoder_phys *phys);
        int (*get_line_count)(struct dpu_encoder_phys *phys);
};

/**
 * enum dpu_intr_idx - dpu encoder interrupt index
 * @INTR_IDX_VSYNC:    Vsync interrupt for video mode panel
 * @INTR_IDX_PINGPONG: Pingpong done unterrupt for cmd mode panel
 * @INTR_IDX_UNDERRUN: Underrun unterrupt for video and cmd mode panel
 * @INTR_IDX_RDPTR:    Readpointer done unterrupt for cmd mode panel
 */
enum dpu_intr_idx {
        INTR_IDX_VSYNC,
        INTR_IDX_PINGPONG,
        INTR_IDX_UNDERRUN,
        INTR_IDX_CTL_START,
        INTR_IDX_RDPTR,
        INTR_IDX_MAX,
};

/**
 * dpu_encoder_irq - tracking structure for interrupts
 * @name:               string name of interrupt
 * @intr_type:          Encoder interrupt type
 * @intr_idx:           Encoder interrupt enumeration
 * @hw_idx:             HW Block ID
 * @irq_idx:            IRQ interface lookup index from DPU IRQ framework
 *                      will be -EINVAL if IRQ is not registered
 * @irq_cb:             interrupt callback
 */
struct dpu_encoder_irq {
        const char *name;
        enum dpu_intr_type intr_type;
        enum dpu_intr_idx intr_idx;
        int hw_idx;
        int irq_idx;
        struct dpu_irq_callback cb;
};

/**
 * struct dpu_encoder_phys - physical encoder that drives a single INTF block
 *      tied to a specific panel / sub-panel. Abstract type, sub-classed by
 *      phys_vid or phys_cmd for video mode or command mode encs respectively.
 * @parent:             Pointer to the containing virtual encoder
 * @connector:          If a mode is set, cached pointer to the active connector
 * @ops:                Operations exposed to the virtual encoder
 * @parent_ops:         Callbacks exposed by the parent to the phys_enc
 * @hw_mdptop:          Hardware interface to the top registers
 * @hw_ctl:             Hardware interface to the ctl registers
 * @hw_pp:              Hardware interface to the ping pong registers
 * @hw_intf:            Hardware interface to the intf registers
 * @dpu_kms:            Pointer to the dpu_kms top level
 * @cached_mode:        DRM mode cached at mode_set time, acted on in enable
 * @enabled:            Whether the encoder has enabled and running a mode
 * @split_role:         Role to play in a split-panel configuration
 * @intf_mode:          Interface mode
 * @intf_idx:           Interface index on dpu hardware
 * @enc_spinlock:       Virtual-Encoder-Wide Spin Lock for IRQ purposes
 * @enable_state:       Enable state tracking
 * @vblank_refcount:    Reference count of vblank request
 * @vsync_cnt:          Vsync count for the physical encoder
 * @underrun_cnt:       Underrun count for the physical encoder
 * @pending_kickoff_cnt:        Atomic counter tracking the number of kickoffs
 *                              vs. the number of done/vblank irqs. Should hover
 *                              between 0-2 Incremented when a new kickoff is
 *                              scheduled. Decremented in irq handler
 * @pending_ctlstart_cnt:       Atomic counter tracking the number of ctl start
 *                              pending.
 * @pending_kickoff_wq:         Wait queue for blocking until kickoff completes
 * @irq:                        IRQ tracking structures
 */
struct dpu_encoder_phys {
        struct drm_encoder *parent;
        struct drm_connector *connector;
        struct dpu_encoder_phys_ops ops;
        const struct dpu_encoder_virt_ops *parent_ops;
        struct dpu_hw_mdp *hw_mdptop;
        struct dpu_hw_ctl *hw_ctl;
        struct dpu_hw_pingpong *hw_pp;
        struct dpu_hw_intf *hw_intf;
        struct dpu_kms *dpu_kms;
        struct drm_display_mode cached_mode;
        enum dpu_enc_split_role split_role;
        enum dpu_intf_mode intf_mode;
        enum dpu_intf intf_idx;
        spinlock_t *enc_spinlock;
        enum dpu_enc_enable_state enable_state;
        atomic_t vblank_refcount;
        atomic_t vsync_cnt;
        atomic_t underrun_cnt;
        atomic_t pending_ctlstart_cnt;
        atomic_t pending_kickoff_cnt;
        wait_queue_head_t pending_kickoff_wq;
        struct dpu_encoder_irq irq[INTR_IDX_MAX];
};

static inline int dpu_encoder_phys_inc_pending(struct dpu_encoder_phys *phys)
{
        atomic_inc_return(&phys->pending_ctlstart_cnt);
        return atomic_inc_return(&phys->pending_kickoff_cnt);
}

/**
 * struct dpu_encoder_phys_cmd - sub-class of dpu_encoder_phys to handle command
 *      mode specific operations
 * @base:       Baseclass physical encoder structure
 * @intf_idx:   Intf Block index used by this phys encoder
 * @stream_sel: Stream selection for multi-stream interfaces
 * @serialize_wait4pp:  serialize wait4pp feature waits for pp_done interrupt
 *                      after ctl_start instead of before next frame kickoff
 * @pp_timeout_report_cnt: number of pingpong done irq timeout errors
 * @pending_vblank_cnt: Atomic counter tracking pending wait for VBLANK
 * @pending_vblank_wq: Wait queue for blocking until VBLANK received
 */
struct dpu_encoder_phys_cmd {
        struct dpu_encoder_phys base;
        int stream_sel;
        bool serialize_wait4pp;
        int pp_timeout_report_cnt;
        atomic_t pending_vblank_cnt;
        wait_queue_head_t pending_vblank_wq;
};

/**
 * struct dpu_enc_phys_init_params - initialization parameters for phys encs
 * @dpu_kms:            Pointer to the dpu_kms top level
 * @parent:             Pointer to the containing virtual encoder
 * @parent_ops:         Callbacks exposed by the parent to the phys_enc
 * @split_role:         Role to play in a split-panel configuration
 * @intf_idx:           Interface index this phys_enc will control
 * @enc_spinlock:       Virtual-Encoder-Wide Spin Lock for IRQ purposes
 */
struct dpu_enc_phys_init_params {
        struct dpu_kms *dpu_kms;
        struct drm_encoder *parent;
        const struct dpu_encoder_virt_ops *parent_ops;
        enum dpu_enc_split_role split_role;
        enum dpu_intf intf_idx;
        spinlock_t *enc_spinlock;
};

/**
 * dpu_encoder_wait_info - container for passing arguments to irq wait functions
 * @wq: wait queue structure
 * @atomic_cnt: wait until atomic_cnt equals zero
 * @timeout_ms: timeout value in milliseconds
 */
struct dpu_encoder_wait_info {
        wait_queue_head_t *wq;
        atomic_t *atomic_cnt;
        s64 timeout_ms;
};

/**
 * dpu_encoder_phys_vid_init - Construct a new video mode physical encoder
 * @p:  Pointer to init params structure
 * Return: Error code or newly allocated encoder
 */
struct dpu_encoder_phys *dpu_encoder_phys_vid_init(
                struct dpu_enc_phys_init_params *p);

/**
 * dpu_encoder_phys_cmd_init - Construct a new command mode physical encoder
 * @p:  Pointer to init params structure
 * Return: Error code or newly allocated encoder
 */
struct dpu_encoder_phys *dpu_encoder_phys_cmd_init(
                struct dpu_enc_phys_init_params *p);

/**
 * dpu_encoder_helper_trigger_start - control start helper function
 *      This helper function may be optionally specified by physical
 *      encoders if they require ctl_start triggering.
 * @phys_enc: Pointer to physical encoder structure
 */
void dpu_encoder_helper_trigger_start(struct dpu_encoder_phys *phys_enc);

static inline enum dpu_3d_blend_mode dpu_encoder_helper_get_3d_blend_mode(
                struct dpu_encoder_phys *phys_enc)
{
        struct dpu_crtc_state *dpu_cstate;

        if (!phys_enc || phys_enc->enable_state == DPU_ENC_DISABLING)
                return BLEND_3D_NONE;

        dpu_cstate = to_dpu_crtc_state(phys_enc->parent->crtc->state);

        if (phys_enc->split_role == ENC_ROLE_SOLO &&
            dpu_cstate->num_mixers == CRTC_DUAL_MIXERS)
                return BLEND_3D_H_ROW_INT;

        return BLEND_3D_NONE;
}

/**
 * dpu_encoder_helper_split_config - split display configuration helper function
 *      This helper function may be used by physical encoders to configure
 *      the split display related registers.
 * @phys_enc: Pointer to physical encoder structure
 * @interface: enum dpu_intf setting
 */
void dpu_encoder_helper_split_config(
                struct dpu_encoder_phys *phys_enc,
                enum dpu_intf interface);

/**
 * dpu_encoder_helper_report_irq_timeout - utility to report error that irq has
 *      timed out, including reporting frame error event to crtc and debug dump
 * @phys_enc: Pointer to physical encoder structure
 * @intr_idx: Failing interrupt index
 */
void dpu_encoder_helper_report_irq_timeout(struct dpu_encoder_phys *phys_enc,
                enum dpu_intr_idx intr_idx);

/**
 * dpu_encoder_helper_wait_for_irq - utility to wait on an irq.
 *      note: will call dpu_encoder_helper_wait_for_irq on timeout
 * @phys_enc: Pointer to physical encoder structure
 * @intr_idx: encoder interrupt index
 * @wait_info: wait info struct
 * @Return: 0 or -ERROR
 */
int dpu_encoder_helper_wait_for_irq(struct dpu_encoder_phys *phys_enc,
                enum dpu_intr_idx intr_idx,
                struct dpu_encoder_wait_info *wait_info);

/**
 * dpu_encoder_helper_register_irq - register and enable an irq
 * @phys_enc: Pointer to physical encoder structure
 * @intr_idx: encoder interrupt index
 * @Return: 0 or -ERROR
 */
int dpu_encoder_helper_register_irq(struct dpu_encoder_phys *phys_enc,
                enum dpu_intr_idx intr_idx);

/**
 * dpu_encoder_helper_unregister_irq - unregister and disable an irq
 * @phys_enc: Pointer to physical encoder structure
 * @intr_idx: encoder interrupt index
 * @Return: 0 or -ERROR
 */
int dpu_encoder_helper_unregister_irq(struct dpu_encoder_phys *phys_enc,
                enum dpu_intr_idx intr_idx);

#endif /* __dpu_encoder_phys_H__ */