drivers/ide/ide-pm.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 #include <linux/kernel.h>
   3 #include <linux/gfp.h>
   4 #include <linux/ide.h>
   5
   6 int generic_ide_suspend(struct device *dev, pm_message_t mesg)
   7 {
   8         ide_drive_t *drive = to_ide_device(dev);
   9         ide_drive_t *pair = ide_get_pair_dev(drive);
  10         ide_hwif_t *hwif = drive->hwif;
  11         struct request *rq;
  12         struct ide_pm_state rqpm;
  13         int ret;
  14
  15         if (ide_port_acpi(hwif)) {
  16                 /* call ACPI _GTM only once */
  17                 if ((drive->dn & 1) == 0 || pair == NULL)
  18                         ide_acpi_get_timing(hwif);
  19         }
  20
  21         memset(&rqpm, 0, sizeof(rqpm));
  22         rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, 0);
  23         ide_req(rq)->type = ATA_PRIV_PM_SUSPEND;
  24         ide_req(rq)->special = &rqpm;
  25         rqpm.pm_step = IDE_PM_START_SUSPEND;
  26         if (mesg.event == PM_EVENT_PRETHAW)
  27                 mesg.event = PM_EVENT_FREEZE;
  28         rqpm.pm_state = mesg.event;
  29
  30         blk_execute_rq(drive->queue, NULL, rq, 0);
  31         ret = scsi_req(rq)->result ? -EIO : 0;
  32         blk_put_request(rq);
  33
  34         if (ret == 0 && ide_port_acpi(hwif)) {
  35                 /* call ACPI _PS3 only after both devices are suspended */
  36                 if ((drive->dn & 1) || pair == NULL)
  37                         ide_acpi_set_state(hwif, 0);
  38         }
  39
  40         return ret;
  41 }
  42
  43 static int ide_pm_execute_rq(struct request *rq)
  44 {
  45         struct request_queue *q = rq->q;
  46
  47         if (unlikely(blk_queue_dying(q))) {
  48                 rq->rq_flags |= RQF_QUIET;
  49                 scsi_req(rq)->result = -ENXIO;
  50                 blk_mq_end_request(rq, BLK_STS_OK);
  51                 return -ENXIO;
  52         }
  53         blk_execute_rq(q, NULL, rq, true);
  54
  55         return scsi_req(rq)->result ? -EIO : 0;
  56 }
  57
  58 int generic_ide_resume(struct device *dev)
  59 {
  60         ide_drive_t *drive = to_ide_device(dev);
  61         ide_drive_t *pair = ide_get_pair_dev(drive);
  62         ide_hwif_t *hwif = drive->hwif;
  63         struct request *rq;
  64         struct ide_pm_state rqpm;
  65         int err;
  66
  67         blk_mq_start_stopped_hw_queues(drive->queue, true);
  68
  69         if (ide_port_acpi(hwif)) {
  70                 /* call ACPI _PS0 / _STM only once */
  71                 if ((drive->dn & 1) == 0 || pair == NULL) {
  72                         ide_acpi_set_state(hwif, 1);
  73                         ide_acpi_push_timing(hwif);
  74                 }
  75
  76                 ide_acpi_exec_tfs(drive);
  77         }
  78
  79         memset(&rqpm, 0, sizeof(rqpm));
  80         rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, BLK_MQ_REQ_PM);
  81         ide_req(rq)->type = ATA_PRIV_PM_RESUME;
  82         ide_req(rq)->special = &rqpm;
  83         rqpm.pm_step = IDE_PM_START_RESUME;
  84         rqpm.pm_state = PM_EVENT_ON;
  85
  86         err = ide_pm_execute_rq(rq);
  87         blk_put_request(rq);
  88
  89         if (err == 0 && dev->driver) {
  90                 struct ide_driver *drv = to_ide_driver(dev->driver);
  91
  92                 if (drv->resume)
  93                         drv->resume(drive);
  94         }
  95
  96         return err;
  97 }
  98
  99 void ide_complete_power_step(ide_drive_t *drive, struct request *rq)
 100 {
 101         struct ide_pm_state *pm = ide_req(rq)->special;
 102
 103 #ifdef DEBUG_PM
 104         printk(KERN_INFO "%s: complete_power_step(step: %d)\n",
 105                 drive->name, pm->pm_step);
 106 #endif
 107         if (drive->media != ide_disk)
 108                 return;
 109
 110         switch (pm->pm_step) {
 111         case IDE_PM_FLUSH_CACHE:        /* Suspend step 1 (flush cache) */
 112                 if (pm->pm_state == PM_EVENT_FREEZE)
 113                         pm->pm_step = IDE_PM_COMPLETED;
 114                 else
 115                         pm->pm_step = IDE_PM_STANDBY;
 116                 break;
 117         case IDE_PM_STANDBY:            /* Suspend step 2 (standby) */
 118                 pm->pm_step = IDE_PM_COMPLETED;
 119                 break;
 120         case IDE_PM_RESTORE_PIO:        /* Resume step 1 (restore PIO) */
 121                 pm->pm_step = IDE_PM_IDLE;
 122                 break;
 123         case IDE_PM_IDLE:               /* Resume step 2 (idle)*/
 124                 pm->pm_step = IDE_PM_RESTORE_DMA;
 125                 break;
 126         }
 127 }
 128
 129 ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
 130 {
 131         struct ide_pm_state *pm = ide_req(rq)->special;
 132         struct ide_cmd cmd = { };
 133
 134         switch (pm->pm_step) {
 135         case IDE_PM_FLUSH_CACHE:        /* Suspend step 1 (flush cache) */
 136                 if (drive->media != ide_disk)
 137                         break;
 138                 /* Not supported? Switch to next step now. */
 139                 if (ata_id_flush_enabled(drive->id) == 0 ||
 140                     (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) {
 141                         ide_complete_power_step(drive, rq);
 142                         return ide_stopped;
 143                 }
 144                 if (ata_id_flush_ext_enabled(drive->id))
 145                         cmd.tf.command = ATA_CMD_FLUSH_EXT;
 146                 else
 147                         cmd.tf.command = ATA_CMD_FLUSH;
 148                 goto out_do_tf;
 149         case IDE_PM_STANDBY:            /* Suspend step 2 (standby) */
 150                 cmd.tf.command = ATA_CMD_STANDBYNOW1;
 151                 goto out_do_tf;
 152         case IDE_PM_RESTORE_PIO:        /* Resume step 1 (restore PIO) */
 153                 ide_set_max_pio(drive);
 154                 /*
 155                  * skip IDE_PM_IDLE for ATAPI devices
 156                  */
 157                 if (drive->media != ide_disk)
 158                         pm->pm_step = IDE_PM_RESTORE_DMA;
 159                 else
 160                         ide_complete_power_step(drive, rq);
 161                 return ide_stopped;
 162         case IDE_PM_IDLE:               /* Resume step 2 (idle) */
 163                 cmd.tf.command = ATA_CMD_IDLEIMMEDIATE;
 164                 goto out_do_tf;
 165         case IDE_PM_RESTORE_DMA:        /* Resume step 3 (restore DMA) */
 166                 /*
 167                  * Right now, all we do is call ide_set_dma(drive),
 168                  * we could be smarter and check for current xfer_speed
 169                  * in struct drive etc...
 170                  */
 171                 if (drive->hwif->dma_ops == NULL)
 172                         break;
 173                 /*
 174                  * TODO: respect IDE_DFLAG_USING_DMA
 175                  */
 176                 ide_set_dma(drive);
 177                 break;
 178         }
 179
 180         pm->pm_step = IDE_PM_COMPLETED;
 181
 182         return ide_stopped;
 183
 184 out_do_tf:
 185         cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
 186         cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
 187         cmd.protocol = ATA_PROT_NODATA;
 188
 189         return do_rw_taskfile(drive, &cmd);
 190 }
 191
 192 /**
 193  *      ide_complete_pm_rq - end the current Power Management request
 194  *      @drive: target drive
 195  *      @rq: request
 196  *
 197  *      This function cleans up the current PM request and stops the queue
 198  *      if necessary.
 199  */
 200 void ide_complete_pm_rq(ide_drive_t *drive, struct request *rq)
 201 {
 202         struct request_queue *q = drive->queue;
 203         struct ide_pm_state *pm = ide_req(rq)->special;
 204
 205         ide_complete_power_step(drive, rq);
 206         if (pm->pm_step != IDE_PM_COMPLETED)
 207                 return;
 208
 209 #ifdef DEBUG_PM
 210         printk("%s: completing PM request, %s\n", drive->name,
 211                (ide_req(rq)->type == ATA_PRIV_PM_SUSPEND) ? "suspend" : "resume");
 212 #endif
 213         if (ide_req(rq)->type == ATA_PRIV_PM_SUSPEND)
 214                 blk_mq_stop_hw_queues(q);
 215         else
 216                 drive->dev_flags &= ~IDE_DFLAG_BLOCKED;
 217
 218         drive->hwif->rq = NULL;
 219
 220         blk_mq_end_request(rq, BLK_STS_OK);
 221 }
 222
 223 void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
 224 {
 225         struct ide_pm_state *pm = ide_req(rq)->special;
 226
 227         if (blk_rq_is_private(rq) &&
 228             ide_req(rq)->type == ATA_PRIV_PM_SUSPEND &&
 229             pm->pm_step == IDE_PM_START_SUSPEND)
 230                 /* Mark drive blocked when starting the suspend sequence. */
 231                 drive->dev_flags |= IDE_DFLAG_BLOCKED;
 232         else if (blk_rq_is_private(rq) &&
 233                  ide_req(rq)->type == ATA_PRIV_PM_RESUME &&
 234                  pm->pm_step == IDE_PM_START_RESUME) {
 235                 /*
 236                  * The first thing we do on wakeup is to wait for BSY bit to
 237                  * go away (with a looong timeout) as a drive on this hwif may
 238                  * just be POSTing itself.
 239                  * We do that before even selecting as the "other" device on
 240                  * the bus may be broken enough to walk on our toes at this
 241                  * point.
 242                  */
 243                 ide_hwif_t *hwif = drive->hwif;
 244                 const struct ide_tp_ops *tp_ops = hwif->tp_ops;
 245                 struct request_queue *q = drive->queue;
 246                 int rc;
 247 #ifdef DEBUG_PM
 248                 printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
 249 #endif
 250                 rc = ide_wait_not_busy(hwif, 35000);
 251                 if (rc)
 252                         printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
 253                 tp_ops->dev_select(drive);
 254                 tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
 255                 rc = ide_wait_not_busy(hwif, 100000);
 256                 if (rc)
 257                         printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
 258
 259                 blk_mq_start_hw_queues(q);
 260         }
 261 }