drivers/iio/adc/vf610_adc.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Freescale Vybrid vf610 ADC driver
   4  *
   5  * Copyright 2013 Freescale Semiconductor, Inc.
   6  */
   7
   8 #include <linux/module.h>
   9 #include <linux/platform_device.h>
  10 #include <linux/interrupt.h>
  11 #include <linux/delay.h>
  12 #include <linux/kernel.h>
  13 #include <linux/slab.h>
  14 #include <linux/io.h>
  15 #include <linux/clk.h>
  16 #include <linux/completion.h>
  17 #include <linux/of.h>
  18 #include <linux/of_irq.h>
  19 #include <linux/regulator/consumer.h>
  20 #include <linux/of_platform.h>
  21 #include <linux/err.h>
  22
  23 #include <linux/iio/iio.h>
  24 #include <linux/iio/buffer.h>
  25 #include <linux/iio/sysfs.h>
  26 #include <linux/iio/trigger.h>
  27 #include <linux/iio/trigger_consumer.h>
  28 #include <linux/iio/triggered_buffer.h>
  29
  30 /* This will be the driver name the kernel reports */
  31 #define DRIVER_NAME "vf610-adc"
  32
  33 /* Vybrid/IMX ADC registers */
  34 #define VF610_REG_ADC_HC0               0x00
  35 #define VF610_REG_ADC_HC1               0x04
  36 #define VF610_REG_ADC_HS                0x08
  37 #define VF610_REG_ADC_R0                0x0c
  38 #define VF610_REG_ADC_R1                0x10
  39 #define VF610_REG_ADC_CFG               0x14
  40 #define VF610_REG_ADC_GC                0x18
  41 #define VF610_REG_ADC_GS                0x1c
  42 #define VF610_REG_ADC_CV                0x20
  43 #define VF610_REG_ADC_OFS               0x24
  44 #define VF610_REG_ADC_CAL               0x28
  45 #define VF610_REG_ADC_PCTL              0x30
  46
  47 /* Configuration register field define */
  48 #define VF610_ADC_MODE_BIT8             0x00
  49 #define VF610_ADC_MODE_BIT10            0x04
  50 #define VF610_ADC_MODE_BIT12            0x08
  51 #define VF610_ADC_MODE_MASK             0x0c
  52 #define VF610_ADC_BUSCLK2_SEL           0x01
  53 #define VF610_ADC_ALTCLK_SEL            0x02
  54 #define VF610_ADC_ADACK_SEL             0x03
  55 #define VF610_ADC_ADCCLK_MASK           0x03
  56 #define VF610_ADC_CLK_DIV2              0x20
  57 #define VF610_ADC_CLK_DIV4              0x40
  58 #define VF610_ADC_CLK_DIV8              0x60
  59 #define VF610_ADC_CLK_MASK              0x60
  60 #define VF610_ADC_ADLSMP_LONG           0x10
  61 #define VF610_ADC_ADSTS_SHORT   0x100
  62 #define VF610_ADC_ADSTS_NORMAL  0x200
  63 #define VF610_ADC_ADSTS_LONG    0x300
  64 #define VF610_ADC_ADSTS_MASK            0x300
  65 #define VF610_ADC_ADLPC_EN              0x80
  66 #define VF610_ADC_ADHSC_EN              0x400
  67 #define VF610_ADC_REFSEL_VALT           0x800
  68 #define VF610_ADC_REFSEL_VBG            0x1000
  69 #define VF610_ADC_ADTRG_HARD            0x2000
  70 #define VF610_ADC_AVGS_8                0x4000
  71 #define VF610_ADC_AVGS_16               0x8000
  72 #define VF610_ADC_AVGS_32               0xC000
  73 #define VF610_ADC_AVGS_MASK             0xC000
  74 #define VF610_ADC_OVWREN                0x10000
  75
  76 /* General control register field define */
  77 #define VF610_ADC_ADACKEN               0x1
  78 #define VF610_ADC_DMAEN                 0x2
  79 #define VF610_ADC_ACREN                 0x4
  80 #define VF610_ADC_ACFGT                 0x8
  81 #define VF610_ADC_ACFE                  0x10
  82 #define VF610_ADC_AVGEN                 0x20
  83 #define VF610_ADC_ADCON                 0x40
  84 #define VF610_ADC_CAL                   0x80
  85
  86 /* Other field define */
  87 #define VF610_ADC_ADCHC(x)              ((x) & 0x1F)
  88 #define VF610_ADC_AIEN                  (0x1 << 7)
  89 #define VF610_ADC_CONV_DISABLE          0x1F
  90 #define VF610_ADC_HS_COCO0              0x1
  91 #define VF610_ADC_CALF                  0x2
  92 #define VF610_ADC_TIMEOUT               msecs_to_jiffies(100)
  93
  94 #define DEFAULT_SAMPLE_TIME             1000
  95
  96 /* V at 25°C of 696 mV */
  97 #define VF610_VTEMP25_3V0               950
  98 /* V at 25°C of 699 mV */
  99 #define VF610_VTEMP25_3V3               867
 100 /* Typical sensor slope coefficient at all temperatures */
 101 #define VF610_TEMP_SLOPE_COEFF          1840
 102
 103 enum clk_sel {
 104         VF610_ADCIOC_BUSCLK_SET,
 105         VF610_ADCIOC_ALTCLK_SET,
 106         VF610_ADCIOC_ADACK_SET,
 107 };
 108
 109 enum vol_ref {
 110         VF610_ADCIOC_VR_VREF_SET,
 111         VF610_ADCIOC_VR_VALT_SET,
 112         VF610_ADCIOC_VR_VBG_SET,
 113 };
 114
 115 enum average_sel {
 116         VF610_ADC_SAMPLE_1,
 117         VF610_ADC_SAMPLE_4,
 118         VF610_ADC_SAMPLE_8,
 119         VF610_ADC_SAMPLE_16,
 120         VF610_ADC_SAMPLE_32,
 121 };
 122
 123 enum conversion_mode_sel {
 124         VF610_ADC_CONV_NORMAL,
 125         VF610_ADC_CONV_HIGH_SPEED,
 126         VF610_ADC_CONV_LOW_POWER,
 127 };
 128
 129 enum lst_adder_sel {
 130         VF610_ADCK_CYCLES_3,
 131         VF610_ADCK_CYCLES_5,
 132         VF610_ADCK_CYCLES_7,
 133         VF610_ADCK_CYCLES_9,
 134         VF610_ADCK_CYCLES_13,
 135         VF610_ADCK_CYCLES_17,
 136         VF610_ADCK_CYCLES_21,
 137         VF610_ADCK_CYCLES_25,
 138 };
 139
 140 struct vf610_adc_feature {
 141         enum clk_sel    clk_sel;
 142         enum vol_ref    vol_ref;
 143         enum conversion_mode_sel conv_mode;
 144
 145         int     clk_div;
 146         int     sample_rate;
 147         int     res_mode;
 148         u32 lst_adder_index;
 149         u32 default_sample_time;
 150
 151         bool    calibration;
 152         bool    ovwren;
 153 };
 154
 155 struct vf610_adc {
 156         struct device *dev;
 157         void __iomem *regs;
 158         struct clk *clk;
 159
 160         u32 vref_uv;
 161         u32 value;
 162         struct regulator *vref;
 163
 164         u32 max_adck_rate[3];
 165         struct vf610_adc_feature adc_feature;
 166
 167         u32 sample_freq_avail[5];
 168
 169         struct completion completion;
 170         u16 buffer[8];
 171 };
 172
 173 static const u32 vf610_hw_avgs[] = { 1, 4, 8, 16, 32 };
 174 static const u32 vf610_lst_adder[] = { 3, 5, 7, 9, 13, 17, 21, 25 };
 175
 176 static inline void vf610_adc_calculate_rates(struct vf610_adc *info)
 177 {
 178         struct vf610_adc_feature *adc_feature = &info->adc_feature;
 179         unsigned long adck_rate, ipg_rate = clk_get_rate(info->clk);
 180         u32 adck_period, lst_addr_min;
 181         int divisor, i;
 182
 183         adck_rate = info->max_adck_rate[adc_feature->conv_mode];
 184
 185         if (adck_rate) {
 186                 /* calculate clk divider which is within specification */
 187                 divisor = ipg_rate / adck_rate;
 188                 adc_feature->clk_div = 1 << fls(divisor + 1);
 189         } else {
 190                 /* fall-back value using a safe divisor */
 191                 adc_feature->clk_div = 8;
 192         }
 193
 194         adck_rate = ipg_rate / adc_feature->clk_div;
 195
 196         /*
 197          * Determine the long sample time adder value to be used based
 198          * on the default minimum sample time provided.
 199          */
 200         adck_period = NSEC_PER_SEC / adck_rate;
 201         lst_addr_min = adc_feature->default_sample_time / adck_period;
 202         for (i = 0; i < ARRAY_SIZE(vf610_lst_adder); i++) {
 203                 if (vf610_lst_adder[i] > lst_addr_min) {
 204                         adc_feature->lst_adder_index = i;
 205                         break;
 206                 }
 207         }
 208
 209         /*
 210          * Calculate ADC sample frequencies
 211          * Sample time unit is ADCK cycles. ADCK clk source is ipg clock,
 212          * which is the same as bus clock.
 213          *
 214          * ADC conversion time = SFCAdder + AverageNum x (BCT + LSTAdder)
 215          * SFCAdder: fixed to 6 ADCK cycles
 216          * AverageNum: 1, 4, 8, 16, 32 samples for hardware average.
 217          * BCT (Base Conversion Time): fixed to 25 ADCK cycles for 12 bit mode
 218          * LSTAdder(Long Sample Time): 3, 5, 7, 9, 13, 17, 21, 25 ADCK cycles
 219          */
 220         for (i = 0; i < ARRAY_SIZE(vf610_hw_avgs); i++)
 221                 info->sample_freq_avail[i] =
 222                         adck_rate / (6 + vf610_hw_avgs[i] *
 223                          (25 + vf610_lst_adder[adc_feature->lst_adder_index]));
 224 }
 225
 226 static inline void vf610_adc_cfg_init(struct vf610_adc *info)
 227 {
 228         struct vf610_adc_feature *adc_feature = &info->adc_feature;
 229
 230         /* set default Configuration for ADC controller */
 231         adc_feature->clk_sel = VF610_ADCIOC_BUSCLK_SET;
 232         adc_feature->vol_ref = VF610_ADCIOC_VR_VREF_SET;
 233
 234         adc_feature->calibration = true;
 235         adc_feature->ovwren = true;
 236
 237         adc_feature->res_mode = 12;
 238         adc_feature->sample_rate = 1;
 239
 240         adc_feature->conv_mode = VF610_ADC_CONV_LOW_POWER;
 241
 242         vf610_adc_calculate_rates(info);
 243 }
 244
 245 static void vf610_adc_cfg_post_set(struct vf610_adc *info)
 246 {
 247         struct vf610_adc_feature *adc_feature = &info->adc_feature;
 248         int cfg_data = 0;
 249         int gc_data = 0;
 250
 251         switch (adc_feature->clk_sel) {
 252         case VF610_ADCIOC_ALTCLK_SET:
 253                 cfg_data |= VF610_ADC_ALTCLK_SEL;
 254                 break;
 255         case VF610_ADCIOC_ADACK_SET:
 256                 cfg_data |= VF610_ADC_ADACK_SEL;
 257                 break;
 258         default:
 259                 break;
 260         }
 261
 262         /* low power set for calibration */
 263         cfg_data |= VF610_ADC_ADLPC_EN;
 264
 265         /* enable high speed for calibration */
 266         cfg_data |= VF610_ADC_ADHSC_EN;
 267
 268         /* voltage reference */
 269         switch (adc_feature->vol_ref) {
 270         case VF610_ADCIOC_VR_VREF_SET:
 271                 break;
 272         case VF610_ADCIOC_VR_VALT_SET:
 273                 cfg_data |= VF610_ADC_REFSEL_VALT;
 274                 break;
 275         case VF610_ADCIOC_VR_VBG_SET:
 276                 cfg_data |= VF610_ADC_REFSEL_VBG;
 277                 break;
 278         default:
 279                 dev_err(info->dev, "error voltage reference\n");
 280         }
 281
 282         /* data overwrite enable */
 283         if (adc_feature->ovwren)
 284                 cfg_data |= VF610_ADC_OVWREN;
 285
 286         writel(cfg_data, info->regs + VF610_REG_ADC_CFG);
 287         writel(gc_data, info->regs + VF610_REG_ADC_GC);
 288 }
 289
 290 static void vf610_adc_calibration(struct vf610_adc *info)
 291 {
 292         int adc_gc, hc_cfg;
 293
 294         if (!info->adc_feature.calibration)
 295                 return;
 296
 297         /* enable calibration interrupt */
 298         hc_cfg = VF610_ADC_AIEN | VF610_ADC_CONV_DISABLE;
 299         writel(hc_cfg, info->regs + VF610_REG_ADC_HC0);
 300
 301         adc_gc = readl(info->regs + VF610_REG_ADC_GC);
 302         writel(adc_gc | VF610_ADC_CAL, info->regs + VF610_REG_ADC_GC);
 303
 304         if (!wait_for_completion_timeout(&info->completion, VF610_ADC_TIMEOUT))
 305                 dev_err(info->dev, "Timeout for adc calibration\n");
 306
 307         adc_gc = readl(info->regs + VF610_REG_ADC_GS);
 308         if (adc_gc & VF610_ADC_CALF)
 309                 dev_err(info->dev, "ADC calibration failed\n");
 310
 311         info->adc_feature.calibration = false;
 312 }
 313
 314 static void vf610_adc_cfg_set(struct vf610_adc *info)
 315 {
 316         struct vf610_adc_feature *adc_feature = &(info->adc_feature);
 317         int cfg_data;
 318
 319         cfg_data = readl(info->regs + VF610_REG_ADC_CFG);
 320
 321         cfg_data &= ~VF610_ADC_ADLPC_EN;
 322         if (adc_feature->conv_mode == VF610_ADC_CONV_LOW_POWER)
 323                 cfg_data |= VF610_ADC_ADLPC_EN;
 324
 325         cfg_data &= ~VF610_ADC_ADHSC_EN;
 326         if (adc_feature->conv_mode == VF610_ADC_CONV_HIGH_SPEED)
 327                 cfg_data |= VF610_ADC_ADHSC_EN;
 328
 329         writel(cfg_data, info->regs + VF610_REG_ADC_CFG);
 330 }
 331
 332 static void vf610_adc_sample_set(struct vf610_adc *info)
 333 {
 334         struct vf610_adc_feature *adc_feature = &(info->adc_feature);
 335         int cfg_data, gc_data;
 336
 337         cfg_data = readl(info->regs + VF610_REG_ADC_CFG);
 338         gc_data = readl(info->regs + VF610_REG_ADC_GC);
 339
 340         /* resolution mode */
 341         cfg_data &= ~VF610_ADC_MODE_MASK;
 342         switch (adc_feature->res_mode) {
 343         case 8:
 344                 cfg_data |= VF610_ADC_MODE_BIT8;
 345                 break;
 346         case 10:
 347                 cfg_data |= VF610_ADC_MODE_BIT10;
 348                 break;
 349         case 12:
 350                 cfg_data |= VF610_ADC_MODE_BIT12;
 351                 break;
 352         default:
 353                 dev_err(info->dev, "error resolution mode\n");
 354                 break;
 355         }
 356
 357         /* clock select and clock divider */
 358         cfg_data &= ~(VF610_ADC_CLK_MASK | VF610_ADC_ADCCLK_MASK);
 359         switch (adc_feature->clk_div) {
 360         case 1:
 361                 break;
 362         case 2:
 363                 cfg_data |= VF610_ADC_CLK_DIV2;
 364                 break;
 365         case 4:
 366                 cfg_data |= VF610_ADC_CLK_DIV4;
 367                 break;
 368         case 8:
 369                 cfg_data |= VF610_ADC_CLK_DIV8;
 370                 break;
 371         case 16:
 372                 switch (adc_feature->clk_sel) {
 373                 case VF610_ADCIOC_BUSCLK_SET:
 374                         cfg_data |= VF610_ADC_BUSCLK2_SEL | VF610_ADC_CLK_DIV8;
 375                         break;
 376                 default:
 377                         dev_err(info->dev, "error clk divider\n");
 378                         break;
 379                 }
 380                 break;
 381         }
 382
 383         /*
 384          * Set ADLSMP and ADSTS based on the Long Sample Time Adder value
 385          * determined.
 386          */
 387         switch (adc_feature->lst_adder_index) {
 388         case VF610_ADCK_CYCLES_3:
 389                 break;
 390         case VF610_ADCK_CYCLES_5:
 391                 cfg_data |= VF610_ADC_ADSTS_SHORT;
 392                 break;
 393         case VF610_ADCK_CYCLES_7:
 394                 cfg_data |= VF610_ADC_ADSTS_NORMAL;
 395                 break;
 396         case VF610_ADCK_CYCLES_9:
 397                 cfg_data |= VF610_ADC_ADSTS_LONG;
 398                 break;
 399         case VF610_ADCK_CYCLES_13:
 400                 cfg_data |= VF610_ADC_ADLSMP_LONG;
 401                 break;
 402         case VF610_ADCK_CYCLES_17:
 403                 cfg_data |= VF610_ADC_ADLSMP_LONG;
 404                 cfg_data |= VF610_ADC_ADSTS_SHORT;
 405                 break;
 406         case VF610_ADCK_CYCLES_21:
 407                 cfg_data |= VF610_ADC_ADLSMP_LONG;
 408                 cfg_data |= VF610_ADC_ADSTS_NORMAL;
 409                 break;
 410         case VF610_ADCK_CYCLES_25:
 411                 cfg_data |= VF610_ADC_ADLSMP_LONG;
 412                 cfg_data |= VF610_ADC_ADSTS_NORMAL;
 413                 break;
 414         default:
 415                 dev_err(info->dev, "error in sample time select\n");
 416         }
 417
 418         /* update hardware average selection */
 419         cfg_data &= ~VF610_ADC_AVGS_MASK;
 420         gc_data &= ~VF610_ADC_AVGEN;
 421         switch (adc_feature->sample_rate) {
 422         case VF610_ADC_SAMPLE_1:
 423                 break;
 424         case VF610_ADC_SAMPLE_4:
 425                 gc_data |= VF610_ADC_AVGEN;
 426                 break;
 427         case VF610_ADC_SAMPLE_8:
 428                 gc_data |= VF610_ADC_AVGEN;
 429                 cfg_data |= VF610_ADC_AVGS_8;
 430                 break;
 431         case VF610_ADC_SAMPLE_16:
 432                 gc_data |= VF610_ADC_AVGEN;
 433                 cfg_data |= VF610_ADC_AVGS_16;
 434                 break;
 435         case VF610_ADC_SAMPLE_32:
 436                 gc_data |= VF610_ADC_AVGEN;
 437                 cfg_data |= VF610_ADC_AVGS_32;
 438                 break;
 439         default:
 440                 dev_err(info->dev,
 441                         "error hardware sample average select\n");
 442         }
 443
 444         writel(cfg_data, info->regs + VF610_REG_ADC_CFG);
 445         writel(gc_data, info->regs + VF610_REG_ADC_GC);
 446 }
 447
 448 static void vf610_adc_hw_init(struct vf610_adc *info)
 449 {
 450         /* CFG: Feature set */
 451         vf610_adc_cfg_post_set(info);
 452         vf610_adc_sample_set(info);
 453
 454         /* adc calibration */
 455         vf610_adc_calibration(info);
 456
 457         /* CFG: power and speed set */
 458         vf610_adc_cfg_set(info);
 459 }
 460
 461 static int vf610_set_conversion_mode(struct iio_dev *indio_dev,
 462                                      const struct iio_chan_spec *chan,
 463                                      unsigned int mode)
 464 {
 465         struct vf610_adc *info = iio_priv(indio_dev);
 466
 467         mutex_lock(&indio_dev->mlock);
 468         info->adc_feature.conv_mode = mode;
 469         vf610_adc_calculate_rates(info);
 470         vf610_adc_hw_init(info);
 471         mutex_unlock(&indio_dev->mlock);
 472
 473         return 0;
 474 }
 475
 476 static int vf610_get_conversion_mode(struct iio_dev *indio_dev,
 477                                      const struct iio_chan_spec *chan)
 478 {
 479         struct vf610_adc *info = iio_priv(indio_dev);
 480
 481         return info->adc_feature.conv_mode;
 482 }
 483
 484 static const char * const vf610_conv_modes[] = { "normal", "high-speed",
 485                                                  "low-power" };
 486
 487 static const struct iio_enum vf610_conversion_mode = {
 488         .items = vf610_conv_modes,
 489         .num_items = ARRAY_SIZE(vf610_conv_modes),
 490         .get = vf610_get_conversion_mode,
 491         .set = vf610_set_conversion_mode,
 492 };
 493
 494 static const struct iio_chan_spec_ext_info vf610_ext_info[] = {
 495         IIO_ENUM("conversion_mode", IIO_SHARED_BY_DIR, &vf610_conversion_mode),
 496         {},
 497 };
 498
 499 #define VF610_ADC_CHAN(_idx, _chan_type) {                      \
 500         .type = (_chan_type),                                   \
 501         .indexed = 1,                                           \
 502         .channel = (_idx),                                      \
 503         .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),           \
 504         .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |  \
 505                                 BIT(IIO_CHAN_INFO_SAMP_FREQ),   \
 506         .ext_info = vf610_ext_info,                             \
 507         .scan_index = (_idx),                   \
 508         .scan_type = {                                  \
 509                 .sign = 'u',                            \
 510                 .realbits = 12,                         \
 511                 .storagebits = 16,                      \
 512         },                                              \
 513 }
 514
 515 #define VF610_ADC_TEMPERATURE_CHAN(_idx, _chan_type) {  \
 516         .type = (_chan_type),   \
 517         .channel = (_idx),              \
 518         .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),     \
 519         .scan_index = (_idx),                                   \
 520         .scan_type = {                                          \
 521                 .sign = 'u',                                    \
 522                 .realbits = 12,                                 \
 523                 .storagebits = 16,                              \
 524         },                                                      \
 525 }
 526
 527 static const struct iio_chan_spec vf610_adc_iio_channels[] = {
 528         VF610_ADC_CHAN(0, IIO_VOLTAGE),
 529         VF610_ADC_CHAN(1, IIO_VOLTAGE),
 530         VF610_ADC_CHAN(2, IIO_VOLTAGE),
 531         VF610_ADC_CHAN(3, IIO_VOLTAGE),
 532         VF610_ADC_CHAN(4, IIO_VOLTAGE),
 533         VF610_ADC_CHAN(5, IIO_VOLTAGE),
 534         VF610_ADC_CHAN(6, IIO_VOLTAGE),
 535         VF610_ADC_CHAN(7, IIO_VOLTAGE),
 536         VF610_ADC_CHAN(8, IIO_VOLTAGE),
 537         VF610_ADC_CHAN(9, IIO_VOLTAGE),
 538         VF610_ADC_CHAN(10, IIO_VOLTAGE),
 539         VF610_ADC_CHAN(11, IIO_VOLTAGE),
 540         VF610_ADC_CHAN(12, IIO_VOLTAGE),
 541         VF610_ADC_CHAN(13, IIO_VOLTAGE),
 542         VF610_ADC_CHAN(14, IIO_VOLTAGE),
 543         VF610_ADC_CHAN(15, IIO_VOLTAGE),
 544         VF610_ADC_TEMPERATURE_CHAN(26, IIO_TEMP),
 545         IIO_CHAN_SOFT_TIMESTAMP(32),
 546         /* sentinel */
 547 };
 548
 549 static int vf610_adc_read_data(struct vf610_adc *info)
 550 {
 551         int result;
 552
 553         result = readl(info->regs + VF610_REG_ADC_R0);
 554
 555         switch (info->adc_feature.res_mode) {
 556         case 8:
 557                 result &= 0xFF;
 558                 break;
 559         case 10:
 560                 result &= 0x3FF;
 561                 break;
 562         case 12:
 563                 result &= 0xFFF;
 564                 break;
 565         default:
 566                 break;
 567         }
 568
 569         return result;
 570 }
 571
 572 static irqreturn_t vf610_adc_isr(int irq, void *dev_id)
 573 {
 574         struct iio_dev *indio_dev = dev_id;
 575         struct vf610_adc *info = iio_priv(indio_dev);
 576         int coco;
 577
 578         coco = readl(info->regs + VF610_REG_ADC_HS);
 579         if (coco & VF610_ADC_HS_COCO0) {
 580                 info->value = vf610_adc_read_data(info);
 581                 if (iio_buffer_enabled(indio_dev)) {
 582                         info->buffer[0] = info->value;
 583                         iio_push_to_buffers_with_timestamp(indio_dev,
 584                                         info->buffer,
 585                                         iio_get_time_ns(indio_dev));
 586                         iio_trigger_notify_done(indio_dev->trig);
 587                 } else
 588                         complete(&info->completion);
 589         }
 590
 591         return IRQ_HANDLED;
 592 }
 593
 594 static ssize_t vf610_show_samp_freq_avail(struct device *dev,
 595                                 struct device_attribute *attr, char *buf)
 596 {
 597         struct vf610_adc *info = iio_priv(dev_to_iio_dev(dev));
 598         size_t len = 0;
 599         int i;
 600
 601         for (i = 0; i < ARRAY_SIZE(info->sample_freq_avail); i++)
 602                 len += scnprintf(buf + len, PAGE_SIZE - len,
 603                         "%u ", info->sample_freq_avail[i]);
 604
 605         /* replace trailing space by newline */
 606         buf[len - 1] = '\n';
 607
 608         return len;
 609 }
 610
 611 static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(vf610_show_samp_freq_avail);
 612
 613 static struct attribute *vf610_attributes[] = {
 614         &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
 615         NULL
 616 };
 617
 618 static const struct attribute_group vf610_attribute_group = {
 619         .attrs = vf610_attributes,
 620 };
 621
 622 static int vf610_read_raw(struct iio_dev *indio_dev,
 623                         struct iio_chan_spec const *chan,
 624                         int *val,
 625                         int *val2,
 626                         long mask)
 627 {
 628         struct vf610_adc *info = iio_priv(indio_dev);
 629         unsigned int hc_cfg;
 630         long ret;
 631
 632         switch (mask) {
 633         case IIO_CHAN_INFO_RAW:
 634         case IIO_CHAN_INFO_PROCESSED:
 635                 mutex_lock(&indio_dev->mlock);
 636                 if (iio_buffer_enabled(indio_dev)) {
 637                         mutex_unlock(&indio_dev->mlock);
 638                         return -EBUSY;
 639                 }
 640
 641                 reinit_completion(&info->completion);
 642                 hc_cfg = VF610_ADC_ADCHC(chan->channel);
 643                 hc_cfg |= VF610_ADC_AIEN;
 644                 writel(hc_cfg, info->regs + VF610_REG_ADC_HC0);
 645                 ret = wait_for_completion_interruptible_timeout
 646                                 (&info->completion, VF610_ADC_TIMEOUT);
 647                 if (ret == 0) {
 648                         mutex_unlock(&indio_dev->mlock);
 649                         return -ETIMEDOUT;
 650                 }
 651                 if (ret < 0) {
 652                         mutex_unlock(&indio_dev->mlock);
 653                         return ret;
 654                 }
 655
 656                 switch (chan->type) {
 657                 case IIO_VOLTAGE:
 658                         *val = info->value;
 659                         break;
 660                 case IIO_TEMP:
 661                         /*
 662                          * Calculate in degree Celsius times 1000
 663                          * Using the typical sensor slope of 1.84 mV/°C
 664                          * and VREFH_ADC at 3.3V, V at 25°C of 699 mV
 665                          */
 666                         *val = 25000 - ((int)info->value - VF610_VTEMP25_3V3) *
 667                                         1000000 / VF610_TEMP_SLOPE_COEFF;
 668
 669                         break;
 670                 default:
 671                         mutex_unlock(&indio_dev->mlock);
 672                         return -EINVAL;
 673                 }
 674
 675                 mutex_unlock(&indio_dev->mlock);
 676                 return IIO_VAL_INT;
 677
 678         case IIO_CHAN_INFO_SCALE:
 679                 *val = info->vref_uv / 1000;
 680                 *val2 = info->adc_feature.res_mode;
 681                 return IIO_VAL_FRACTIONAL_LOG2;
 682
 683         case IIO_CHAN_INFO_SAMP_FREQ:
 684                 *val = info->sample_freq_avail[info->adc_feature.sample_rate];
 685                 *val2 = 0;
 686                 return IIO_VAL_INT;
 687
 688         default:
 689                 break;
 690         }
 691
 692         return -EINVAL;
 693 }
 694
 695 static int vf610_write_raw(struct iio_dev *indio_dev,
 696                         struct iio_chan_spec const *chan,
 697                         int val,
 698                         int val2,
 699                         long mask)
 700 {
 701         struct vf610_adc *info = iio_priv(indio_dev);
 702         int i;
 703
 704         switch (mask) {
 705         case IIO_CHAN_INFO_SAMP_FREQ:
 706                 for (i = 0;
 707                         i < ARRAY_SIZE(info->sample_freq_avail);
 708                         i++)
 709                         if (val == info->sample_freq_avail[i]) {
 710                                 info->adc_feature.sample_rate = i;
 711                                 vf610_adc_sample_set(info);
 712                                 return 0;
 713                         }
 714                 break;
 715
 716         default:
 717                 break;
 718         }
 719
 720         return -EINVAL;
 721 }
 722
 723 static int vf610_adc_buffer_postenable(struct iio_dev *indio_dev)
 724 {
 725         struct vf610_adc *info = iio_priv(indio_dev);
 726         unsigned int channel;
 727         int val;
 728
 729         val = readl(info->regs + VF610_REG_ADC_GC);
 730         val |= VF610_ADC_ADCON;
 731         writel(val, info->regs + VF610_REG_ADC_GC);
 732
 733         channel = find_first_bit(indio_dev->active_scan_mask,
 734                                                 indio_dev->masklength);
 735
 736         val = VF610_ADC_ADCHC(channel);
 737         val |= VF610_ADC_AIEN;
 738
 739         writel(val, info->regs + VF610_REG_ADC_HC0);
 740
 741         return 0;
 742 }
 743
 744 static int vf610_adc_buffer_predisable(struct iio_dev *indio_dev)
 745 {
 746         struct vf610_adc *info = iio_priv(indio_dev);
 747         unsigned int hc_cfg = 0;
 748         int val;
 749
 750         val = readl(info->regs + VF610_REG_ADC_GC);
 751         val &= ~VF610_ADC_ADCON;
 752         writel(val, info->regs + VF610_REG_ADC_GC);
 753
 754         hc_cfg |= VF610_ADC_CONV_DISABLE;
 755         hc_cfg &= ~VF610_ADC_AIEN;
 756
 757         writel(hc_cfg, info->regs + VF610_REG_ADC_HC0);
 758
 759         return 0;
 760 }
 761
 762 static const struct iio_buffer_setup_ops iio_triggered_buffer_setup_ops = {
 763         .postenable = &vf610_adc_buffer_postenable,
 764         .predisable = &vf610_adc_buffer_predisable,
 765         .validate_scan_mask = &iio_validate_scan_mask_onehot,
 766 };
 767
 768 static int vf610_adc_reg_access(struct iio_dev *indio_dev,
 769                         unsigned reg, unsigned writeval,
 770                         unsigned *readval)
 771 {
 772         struct vf610_adc *info = iio_priv(indio_dev);
 773
 774         if ((readval == NULL) ||
 775                 ((reg % 4) || (reg > VF610_REG_ADC_PCTL)))
 776                 return -EINVAL;
 777
 778         *readval = readl(info->regs + reg);
 779
 780         return 0;
 781 }
 782
 783 static const struct iio_info vf610_adc_iio_info = {
 784         .read_raw = &vf610_read_raw,
 785         .write_raw = &vf610_write_raw,
 786         .debugfs_reg_access = &vf610_adc_reg_access,
 787         .attrs = &vf610_attribute_group,
 788 };
 789
 790 static const struct of_device_id vf610_adc_match[] = {
 791         { .compatible = "fsl,vf610-adc", },
 792         { /* sentinel */ }
 793 };
 794 MODULE_DEVICE_TABLE(of, vf610_adc_match);
 795
 796 static int vf610_adc_probe(struct platform_device *pdev)
 797 {
 798         struct vf610_adc *info;
 799         struct iio_dev *indio_dev;
 800         int irq;
 801         int ret;
 802
 803         indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct vf610_adc));
 804         if (!indio_dev) {
 805                 dev_err(&pdev->dev, "Failed allocating iio device\n");
 806                 return -ENOMEM;
 807         }
 808
 809         info = iio_priv(indio_dev);
 810         info->dev = &pdev->dev;
 811
 812         info->regs = devm_platform_ioremap_resource(pdev, 0);
 813         if (IS_ERR(info->regs))
 814                 return PTR_ERR(info->regs);
 815
 816         irq = platform_get_irq(pdev, 0);
 817         if (irq < 0)
 818                 return irq;
 819
 820         ret = devm_request_irq(info->dev, irq,
 821                                 vf610_adc_isr, 0,
 822                                 dev_name(&pdev->dev), indio_dev);
 823         if (ret < 0) {
 824                 dev_err(&pdev->dev, "failed requesting irq, irq = %d\n", irq);
 825                 return ret;
 826         }
 827
 828         info->clk = devm_clk_get(&pdev->dev, "adc");
 829         if (IS_ERR(info->clk)) {
 830                 dev_err(&pdev->dev, "failed getting clock, err = %ld\n",
 831                                                 PTR_ERR(info->clk));
 832                 return PTR_ERR(info->clk);
 833         }
 834
 835         info->vref = devm_regulator_get(&pdev->dev, "vref");
 836         if (IS_ERR(info->vref))
 837                 return PTR_ERR(info->vref);
 838
 839         ret = regulator_enable(info->vref);
 840         if (ret)
 841                 return ret;
 842
 843         info->vref_uv = regulator_get_voltage(info->vref);
 844
 845         of_property_read_u32_array(pdev->dev.of_node, "fsl,adck-max-frequency",
 846                         info->max_adck_rate, 3);
 847
 848         ret = of_property_read_u32(pdev->dev.of_node, "min-sample-time",
 849                         &info->adc_feature.default_sample_time);
 850         if (ret)
 851                 info->adc_feature.default_sample_time = DEFAULT_SAMPLE_TIME;
 852
 853         platform_set_drvdata(pdev, indio_dev);
 854
 855         init_completion(&info->completion);
 856
 857         indio_dev->name = dev_name(&pdev->dev);
 858         indio_dev->info = &vf610_adc_iio_info;
 859         indio_dev->modes = INDIO_DIRECT_MODE;
 860         indio_dev->channels = vf610_adc_iio_channels;
 861         indio_dev->num_channels = ARRAY_SIZE(vf610_adc_iio_channels);
 862
 863         ret = clk_prepare_enable(info->clk);
 864         if (ret) {
 865                 dev_err(&pdev->dev,
 866                         "Could not prepare or enable the clock.\n");
 867                 goto error_adc_clk_enable;
 868         }
 869
 870         vf610_adc_cfg_init(info);
 871         vf610_adc_hw_init(info);
 872
 873         ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
 874                                         NULL, &iio_triggered_buffer_setup_ops);
 875         if (ret < 0) {
 876                 dev_err(&pdev->dev, "Couldn't initialise the buffer\n");
 877                 goto error_iio_device_register;
 878         }
 879
 880         ret = iio_device_register(indio_dev);
 881         if (ret) {
 882                 dev_err(&pdev->dev, "Couldn't register the device.\n");
 883                 goto error_adc_buffer_init;
 884         }
 885
 886         return 0;
 887
 888 error_adc_buffer_init:
 889         iio_triggered_buffer_cleanup(indio_dev);
 890 error_iio_device_register:
 891         clk_disable_unprepare(info->clk);
 892 error_adc_clk_enable:
 893         regulator_disable(info->vref);
 894
 895         return ret;
 896 }
 897
 898 static int vf610_adc_remove(struct platform_device *pdev)
 899 {
 900         struct iio_dev *indio_dev = platform_get_drvdata(pdev);
 901         struct vf610_adc *info = iio_priv(indio_dev);
 902
 903         iio_device_unregister(indio_dev);
 904         iio_triggered_buffer_cleanup(indio_dev);
 905         regulator_disable(info->vref);
 906         clk_disable_unprepare(info->clk);
 907
 908         return 0;
 909 }
 910
 911 #ifdef CONFIG_PM_SLEEP
 912 static int vf610_adc_suspend(struct device *dev)
 913 {
 914         struct iio_dev *indio_dev = dev_get_drvdata(dev);
 915         struct vf610_adc *info = iio_priv(indio_dev);
 916         int hc_cfg;
 917
 918         /* ADC controller enters to stop mode */
 919         hc_cfg = readl(info->regs + VF610_REG_ADC_HC0);
 920         hc_cfg |= VF610_ADC_CONV_DISABLE;
 921         writel(hc_cfg, info->regs + VF610_REG_ADC_HC0);
 922
 923         clk_disable_unprepare(info->clk);
 924         regulator_disable(info->vref);
 925
 926         return 0;
 927 }
 928
 929 static int vf610_adc_resume(struct device *dev)
 930 {
 931         struct iio_dev *indio_dev = dev_get_drvdata(dev);
 932         struct vf610_adc *info = iio_priv(indio_dev);
 933         int ret;
 934
 935         ret = regulator_enable(info->vref);
 936         if (ret)
 937                 return ret;
 938
 939         ret = clk_prepare_enable(info->clk);
 940         if (ret)
 941                 goto disable_reg;
 942
 943         vf610_adc_hw_init(info);
 944
 945         return 0;
 946
 947 disable_reg:
 948         regulator_disable(info->vref);
 949         return ret;
 950 }
 951 #endif
 952
 953 static SIMPLE_DEV_PM_OPS(vf610_adc_pm_ops, vf610_adc_suspend, vf610_adc_resume);
 954
 955 static struct platform_driver vf610_adc_driver = {
 956         .probe          = vf610_adc_probe,
 957         .remove         = vf610_adc_remove,
 958         .driver         = {
 959                 .name   = DRIVER_NAME,
 960                 .of_match_table = vf610_adc_match,
 961                 .pm     = &vf610_adc_pm_ops,
 962         },
 963 };
 964
 965 module_platform_driver(vf610_adc_driver);
 966
 967 MODULE_AUTHOR("Fugang Duan <B38611@freescale.com>");
 968 MODULE_DESCRIPTION("Freescale VF610 ADC driver");
 969 MODULE_LICENSE("GPL v2");