drivers/iio/common/st_sensors/st_sensors_i2c.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * STMicroelectronics sensors i2c library driver
   4  *
   5  * Copyright 2012-2013 STMicroelectronics Inc.
   6  *
   7  * Denis Ciocca <denis.ciocca@st.com>
   8  */
   9
  10 #include <linux/kernel.h>
  11 #include <linux/module.h>
  12 #include <linux/slab.h>
  13 #include <linux/iio/iio.h>
  14 #include <linux/regmap.h>
  15
  16 #include <linux/iio/common/st_sensors_i2c.h>
  17
  18
  19 #define ST_SENSORS_I2C_MULTIREAD        0x80
  20
  21 static const struct regmap_config st_sensors_i2c_regmap_config = {
  22         .reg_bits = 8,
  23         .val_bits = 8,
  24 };
  25
  26 static const struct regmap_config st_sensors_i2c_regmap_multiread_bit_config = {
  27         .reg_bits = 8,
  28         .val_bits = 8,
  29         .read_flag_mask = ST_SENSORS_I2C_MULTIREAD,
  30 };
  31
  32 /*
  33  * st_sensors_i2c_configure() - configure I2C interface
  34  * @indio_dev: IIO device reference.
  35  * @client: i2c client reference.
  36  *
  37  * Return: 0 on success, else a negative error code.
  38  */
  39 int st_sensors_i2c_configure(struct iio_dev *indio_dev,
  40                              struct i2c_client *client)
  41 {
  42         struct st_sensor_data *sdata = iio_priv(indio_dev);
  43         const struct regmap_config *config;
  44
  45         if (sdata->sensor_settings->multi_read_bit)
  46                 config = &st_sensors_i2c_regmap_multiread_bit_config;
  47         else
  48                 config = &st_sensors_i2c_regmap_config;
  49
  50         sdata->regmap = devm_regmap_init_i2c(client, config);
  51         if (IS_ERR(sdata->regmap)) {
  52                 dev_err(&client->dev, "Failed to register i2c regmap (%ld)\n",
  53                         PTR_ERR(sdata->regmap));
  54                 return PTR_ERR(sdata->regmap);
  55         }
  56
  57         i2c_set_clientdata(client, indio_dev);
  58
  59         indio_dev->name = client->name;
  60
  61         sdata->dev = &client->dev;
  62         sdata->irq = client->irq;
  63
  64         return 0;
  65 }
  66 EXPORT_SYMBOL(st_sensors_i2c_configure);
  67
  68 MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
  69 MODULE_DESCRIPTION("STMicroelectronics ST-sensors i2c driver");
  70 MODULE_LICENSE("GPL v2");