drivers/iio/gyro/hid-sensor-gyro-3d.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * HID Sensors Driver
   4  * Copyright (c) 2012, Intel Corporation.
   5  */
   6 #include <linux/device.h>
   7 #include <linux/platform_device.h>
   8 #include <linux/module.h>
   9 #include <linux/interrupt.h>
  10 #include <linux/irq.h>
  11 #include <linux/slab.h>
  12 #include <linux/delay.h>
  13 #include <linux/hid-sensor-hub.h>
  14 #include <linux/iio/iio.h>
  15 #include <linux/iio/sysfs.h>
  16 #include <linux/iio/buffer.h>
  17 #include "../common/hid-sensors/hid-sensor-trigger.h"
  18
  19 enum gyro_3d_channel {
  20         CHANNEL_SCAN_INDEX_X,
  21         CHANNEL_SCAN_INDEX_Y,
  22         CHANNEL_SCAN_INDEX_Z,
  23         GYRO_3D_CHANNEL_MAX,
  24 };
  25
  26 struct gyro_3d_state {
  27         struct hid_sensor_hub_callbacks callbacks;
  28         struct hid_sensor_common common_attributes;
  29         struct hid_sensor_hub_attribute_info gyro[GYRO_3D_CHANNEL_MAX];
  30         u32 gyro_val[GYRO_3D_CHANNEL_MAX];
  31         int scale_pre_decml;
  32         int scale_post_decml;
  33         int scale_precision;
  34         int value_offset;
  35 };
  36
  37 static const u32 gyro_3d_addresses[GYRO_3D_CHANNEL_MAX] = {
  38         HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS,
  39         HID_USAGE_SENSOR_ANGL_VELOCITY_Y_AXIS,
  40         HID_USAGE_SENSOR_ANGL_VELOCITY_Z_AXIS
  41 };
  42
  43 /* Channel definitions */
  44 static const struct iio_chan_spec gyro_3d_channels[] = {
  45         {
  46                 .type = IIO_ANGL_VEL,
  47                 .modified = 1,
  48                 .channel2 = IIO_MOD_X,
  49                 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
  50                 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
  51                 BIT(IIO_CHAN_INFO_SCALE) |
  52                 BIT(IIO_CHAN_INFO_SAMP_FREQ) |
  53                 BIT(IIO_CHAN_INFO_HYSTERESIS),
  54                 .scan_index = CHANNEL_SCAN_INDEX_X,
  55         }, {
  56                 .type = IIO_ANGL_VEL,
  57                 .modified = 1,
  58                 .channel2 = IIO_MOD_Y,
  59                 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
  60                 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
  61                 BIT(IIO_CHAN_INFO_SCALE) |
  62                 BIT(IIO_CHAN_INFO_SAMP_FREQ) |
  63                 BIT(IIO_CHAN_INFO_HYSTERESIS),
  64                 .scan_index = CHANNEL_SCAN_INDEX_Y,
  65         }, {
  66                 .type = IIO_ANGL_VEL,
  67                 .modified = 1,
  68                 .channel2 = IIO_MOD_Z,
  69                 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
  70                 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
  71                 BIT(IIO_CHAN_INFO_SCALE) |
  72                 BIT(IIO_CHAN_INFO_SAMP_FREQ) |
  73                 BIT(IIO_CHAN_INFO_HYSTERESIS),
  74                 .scan_index = CHANNEL_SCAN_INDEX_Z,
  75         }
  76 };
  77
  78 /* Adjust channel real bits based on report descriptor */
  79 static void gyro_3d_adjust_channel_bit_mask(struct iio_chan_spec *channels,
  80                                                 int channel, int size)
  81 {
  82         channels[channel].scan_type.sign = 's';
  83         /* Real storage bits will change based on the report desc. */
  84         channels[channel].scan_type.realbits = size * 8;
  85         /* Maximum size of a sample to capture is u32 */
  86         channels[channel].scan_type.storagebits = sizeof(u32) * 8;
  87 }
  88
  89 /* Channel read_raw handler */
  90 static int gyro_3d_read_raw(struct iio_dev *indio_dev,
  91                               struct iio_chan_spec const *chan,
  92                               int *val, int *val2,
  93                               long mask)
  94 {
  95         struct gyro_3d_state *gyro_state = iio_priv(indio_dev);
  96         int report_id = -1;
  97         u32 address;
  98         int ret_type;
  99         s32 min;
 100
 101         *val = 0;
 102         *val2 = 0;
 103         switch (mask) {
 104         case IIO_CHAN_INFO_RAW:
 105                 hid_sensor_power_state(&gyro_state->common_attributes, true);
 106                 report_id = gyro_state->gyro[chan->scan_index].report_id;
 107                 min = gyro_state->gyro[chan->scan_index].logical_minimum;
 108                 address = gyro_3d_addresses[chan->scan_index];
 109                 if (report_id >= 0)
 110                         *val = sensor_hub_input_attr_get_raw_value(
 111                                         gyro_state->common_attributes.hsdev,
 112                                         HID_USAGE_SENSOR_GYRO_3D, address,
 113                                         report_id,
 114                                         SENSOR_HUB_SYNC,
 115                                         min < 0);
 116                 else {
 117                         *val = 0;
 118                         hid_sensor_power_state(&gyro_state->common_attributes,
 119                                                 false);
 120                         return -EINVAL;
 121                 }
 122                 hid_sensor_power_state(&gyro_state->common_attributes, false);
 123                 ret_type = IIO_VAL_INT;
 124                 break;
 125         case IIO_CHAN_INFO_SCALE:
 126                 *val = gyro_state->scale_pre_decml;
 127                 *val2 = gyro_state->scale_post_decml;
 128                 ret_type = gyro_state->scale_precision;
 129                 break;
 130         case IIO_CHAN_INFO_OFFSET:
 131                 *val = gyro_state->value_offset;
 132                 ret_type = IIO_VAL_INT;
 133                 break;
 134         case IIO_CHAN_INFO_SAMP_FREQ:
 135                 ret_type = hid_sensor_read_samp_freq_value(
 136                         &gyro_state->common_attributes, val, val2);
 137                 break;
 138         case IIO_CHAN_INFO_HYSTERESIS:
 139                 ret_type = hid_sensor_read_raw_hyst_value(
 140                         &gyro_state->common_attributes, val, val2);
 141                 break;
 142         default:
 143                 ret_type = -EINVAL;
 144                 break;
 145         }
 146
 147         return ret_type;
 148 }
 149
 150 /* Channel write_raw handler */
 151 static int gyro_3d_write_raw(struct iio_dev *indio_dev,
 152                                struct iio_chan_spec const *chan,
 153                                int val,
 154                                int val2,
 155                                long mask)
 156 {
 157         struct gyro_3d_state *gyro_state = iio_priv(indio_dev);
 158         int ret = 0;
 159
 160         switch (mask) {
 161         case IIO_CHAN_INFO_SAMP_FREQ:
 162                 ret = hid_sensor_write_samp_freq_value(
 163                                 &gyro_state->common_attributes, val, val2);
 164                 break;
 165         case IIO_CHAN_INFO_HYSTERESIS:
 166                 ret = hid_sensor_write_raw_hyst_value(
 167                                 &gyro_state->common_attributes, val, val2);
 168                 break;
 169         default:
 170                 ret = -EINVAL;
 171         }
 172
 173         return ret;
 174 }
 175
 176 static const struct iio_info gyro_3d_info = {
 177         .read_raw = &gyro_3d_read_raw,
 178         .write_raw = &gyro_3d_write_raw,
 179 };
 180
 181 /* Function to push data to buffer */
 182 static void hid_sensor_push_data(struct iio_dev *indio_dev, const void *data,
 183         int len)
 184 {
 185         dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n");
 186         iio_push_to_buffers(indio_dev, data);
 187 }
 188
 189 /* Callback handler to send event after all samples are received and captured */
 190 static int gyro_3d_proc_event(struct hid_sensor_hub_device *hsdev,
 191                                 unsigned usage_id,
 192                                 void *priv)
 193 {
 194         struct iio_dev *indio_dev = platform_get_drvdata(priv);
 195         struct gyro_3d_state *gyro_state = iio_priv(indio_dev);
 196
 197         dev_dbg(&indio_dev->dev, "gyro_3d_proc_event\n");
 198         if (atomic_read(&gyro_state->common_attributes.data_ready))
 199                 hid_sensor_push_data(indio_dev,
 200                                 gyro_state->gyro_val,
 201                                 sizeof(gyro_state->gyro_val));
 202
 203         return 0;
 204 }
 205
 206 /* Capture samples in local storage */
 207 static int gyro_3d_capture_sample(struct hid_sensor_hub_device *hsdev,
 208                                 unsigned usage_id,
 209                                 size_t raw_len, char *raw_data,
 210                                 void *priv)
 211 {
 212         struct iio_dev *indio_dev = platform_get_drvdata(priv);
 213         struct gyro_3d_state *gyro_state = iio_priv(indio_dev);
 214         int offset;
 215         int ret = -EINVAL;
 216
 217         switch (usage_id) {
 218         case HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS:
 219         case HID_USAGE_SENSOR_ANGL_VELOCITY_Y_AXIS:
 220         case HID_USAGE_SENSOR_ANGL_VELOCITY_Z_AXIS:
 221                 offset = usage_id - HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS;
 222                 gyro_state->gyro_val[CHANNEL_SCAN_INDEX_X + offset] =
 223                                                 *(u32 *)raw_data;
 224                 ret = 0;
 225         break;
 226         default:
 227                 break;
 228         }
 229
 230         return ret;
 231 }
 232
 233 /* Parse report which is specific to an usage id*/
 234 static int gyro_3d_parse_report(struct platform_device *pdev,
 235                                 struct hid_sensor_hub_device *hsdev,
 236                                 struct iio_chan_spec *channels,
 237                                 unsigned usage_id,
 238                                 struct gyro_3d_state *st)
 239 {
 240         int ret;
 241         int i;
 242
 243         for (i = 0; i <= CHANNEL_SCAN_INDEX_Z; ++i) {
 244                 ret = sensor_hub_input_get_attribute_info(hsdev,
 245                                 HID_INPUT_REPORT,
 246                                 usage_id,
 247                                 HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS + i,
 248                                 &st->gyro[CHANNEL_SCAN_INDEX_X + i]);
 249                 if (ret < 0)
 250                         break;
 251                 gyro_3d_adjust_channel_bit_mask(channels,
 252                                 CHANNEL_SCAN_INDEX_X + i,
 253                                 st->gyro[CHANNEL_SCAN_INDEX_X + i].size);
 254         }
 255         dev_dbg(&pdev->dev, "gyro_3d %x:%x, %x:%x, %x:%x\n",
 256                         st->gyro[0].index,
 257                         st->gyro[0].report_id,
 258                         st->gyro[1].index, st->gyro[1].report_id,
 259                         st->gyro[2].index, st->gyro[2].report_id);
 260
 261         st->scale_precision = hid_sensor_format_scale(
 262                                 HID_USAGE_SENSOR_GYRO_3D,
 263                                 &st->gyro[CHANNEL_SCAN_INDEX_X],
 264                                 &st->scale_pre_decml, &st->scale_post_decml);
 265
 266         /* Set Sensitivity field ids, when there is no individual modifier */
 267         if (st->common_attributes.sensitivity.index < 0) {
 268                 sensor_hub_input_get_attribute_info(hsdev,
 269                         HID_FEATURE_REPORT, usage_id,
 270                         HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS |
 271                         HID_USAGE_SENSOR_DATA_ANGL_VELOCITY,
 272                         &st->common_attributes.sensitivity);
 273                 dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n",
 274                         st->common_attributes.sensitivity.index,
 275                         st->common_attributes.sensitivity.report_id);
 276         }
 277         return ret;
 278 }
 279
 280 /* Function to initialize the processing for usage id */
 281 static int hid_gyro_3d_probe(struct platform_device *pdev)
 282 {
 283         int ret = 0;
 284         static const char *name = "gyro_3d";
 285         struct iio_dev *indio_dev;
 286         struct gyro_3d_state *gyro_state;
 287         struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
 288
 289         indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*gyro_state));
 290         if (!indio_dev)
 291                 return -ENOMEM;
 292         platform_set_drvdata(pdev, indio_dev);
 293
 294         gyro_state = iio_priv(indio_dev);
 295         gyro_state->common_attributes.hsdev = hsdev;
 296         gyro_state->common_attributes.pdev = pdev;
 297
 298         ret = hid_sensor_parse_common_attributes(hsdev,
 299                                                 HID_USAGE_SENSOR_GYRO_3D,
 300                                                 &gyro_state->common_attributes);
 301         if (ret) {
 302                 dev_err(&pdev->dev, "failed to setup common attributes\n");
 303                 return ret;
 304         }
 305
 306         indio_dev->channels = kmemdup(gyro_3d_channels,
 307                                       sizeof(gyro_3d_channels), GFP_KERNEL);
 308         if (!indio_dev->channels) {
 309                 dev_err(&pdev->dev, "failed to duplicate channels\n");
 310                 return -ENOMEM;
 311         }
 312
 313         ret = gyro_3d_parse_report(pdev, hsdev,
 314                                    (struct iio_chan_spec *)indio_dev->channels,
 315                                    HID_USAGE_SENSOR_GYRO_3D, gyro_state);
 316         if (ret) {
 317                 dev_err(&pdev->dev, "failed to setup attributes\n");
 318                 goto error_free_dev_mem;
 319         }
 320
 321         indio_dev->num_channels = ARRAY_SIZE(gyro_3d_channels);
 322         indio_dev->info = &gyro_3d_info;
 323         indio_dev->name = name;
 324         indio_dev->modes = INDIO_DIRECT_MODE;
 325
 326         atomic_set(&gyro_state->common_attributes.data_ready, 0);
 327
 328         ret = hid_sensor_setup_trigger(indio_dev, name,
 329                                         &gyro_state->common_attributes);
 330         if (ret < 0) {
 331                 dev_err(&pdev->dev, "trigger setup failed\n");
 332                 goto error_free_dev_mem;
 333         }
 334
 335         ret = iio_device_register(indio_dev);
 336         if (ret) {
 337                 dev_err(&pdev->dev, "device register failed\n");
 338                 goto error_remove_trigger;
 339         }
 340
 341         gyro_state->callbacks.send_event = gyro_3d_proc_event;
 342         gyro_state->callbacks.capture_sample = gyro_3d_capture_sample;
 343         gyro_state->callbacks.pdev = pdev;
 344         ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_GYRO_3D,
 345                                         &gyro_state->callbacks);
 346         if (ret < 0) {
 347                 dev_err(&pdev->dev, "callback reg failed\n");
 348                 goto error_iio_unreg;
 349         }
 350
 351         return ret;
 352
 353 error_iio_unreg:
 354         iio_device_unregister(indio_dev);
 355 error_remove_trigger:
 356         hid_sensor_remove_trigger(indio_dev, &gyro_state->common_attributes);
 357 error_free_dev_mem:
 358         kfree(indio_dev->channels);
 359         return ret;
 360 }
 361
 362 /* Function to deinitialize the processing for usage id */
 363 static int hid_gyro_3d_remove(struct platform_device *pdev)
 364 {
 365         struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
 366         struct iio_dev *indio_dev = platform_get_drvdata(pdev);
 367         struct gyro_3d_state *gyro_state = iio_priv(indio_dev);
 368
 369         sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_GYRO_3D);
 370         iio_device_unregister(indio_dev);
 371         hid_sensor_remove_trigger(indio_dev, &gyro_state->common_attributes);
 372         kfree(indio_dev->channels);
 373
 374         return 0;
 375 }
 376
 377 static const struct platform_device_id hid_gyro_3d_ids[] = {
 378         {
 379                 /* Format: HID-SENSOR-usage_id_in_hex_lowercase */
 380                 .name = "HID-SENSOR-200076",
 381         },
 382         { /* sentinel */ }
 383 };
 384 MODULE_DEVICE_TABLE(platform, hid_gyro_3d_ids);
 385
 386 static struct platform_driver hid_gyro_3d_platform_driver = {
 387         .id_table = hid_gyro_3d_ids,
 388         .driver = {
 389                 .name   = KBUILD_MODNAME,
 390                 .pm     = &hid_sensor_pm_ops,
 391         },
 392         .probe          = hid_gyro_3d_probe,
 393         .remove         = hid_gyro_3d_remove,
 394 };
 395 module_platform_driver(hid_gyro_3d_platform_driver);
 396
 397 MODULE_DESCRIPTION("HID Sensor Gyroscope 3D");
 398 MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@intel.com>");
 399 MODULE_LICENSE("GPL");