Merge tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block
[linux/fpc-iii.git] / drivers / iio / light / gp2ap020a00f.c
blobe2850c1a735339b4b9582728b06647383ac77a09
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright (C) 2013 Samsung Electronics Co., Ltd.
4 * Author: Jacek Anaszewski <j.anaszewski@samsung.com>
6 * IIO features supported by the driver:
8 * Read-only raw channels:
9 * - illuminance_clear [lux]
10 * - illuminance_ir
11 * - proximity
13 * Triggered buffer:
14 * - illuminance_clear
15 * - illuminance_ir
16 * - proximity
18 * Events:
19 * - illuminance_clear (rising and falling)
20 * - proximity (rising and falling)
21 * - both falling and rising thresholds for the proximity events
22 * must be set to the values greater than 0.
24 * The driver supports triggered buffers for all the three
25 * channels as well as high and low threshold events for the
26 * illuminance_clear and proxmimity channels. Triggers
27 * can be enabled simultaneously with both illuminance_clear
28 * events. Proximity events cannot be enabled simultaneously
29 * with any triggers or illuminance events. Enabling/disabling
30 * one of the proximity events automatically enables/disables
31 * the other one.
34 #include <linux/debugfs.h>
35 #include <linux/delay.h>
36 #include <linux/i2c.h>
37 #include <linux/interrupt.h>
38 #include <linux/irq.h>
39 #include <linux/irq_work.h>
40 #include <linux/module.h>
41 #include <linux/mod_devicetable.h>
42 #include <linux/mutex.h>
43 #include <linux/regmap.h>
44 #include <linux/regulator/consumer.h>
45 #include <linux/slab.h>
46 #include <asm/unaligned.h>
47 #include <linux/iio/buffer.h>
48 #include <linux/iio/events.h>
49 #include <linux/iio/iio.h>
50 #include <linux/iio/sysfs.h>
51 #include <linux/iio/trigger.h>
52 #include <linux/iio/trigger_consumer.h>
53 #include <linux/iio/triggered_buffer.h>
55 #define GP2A_I2C_NAME "gp2ap020a00f"
57 /* Registers */
58 #define GP2AP020A00F_OP_REG 0x00 /* Basic operations */
59 #define GP2AP020A00F_ALS_REG 0x01 /* ALS related settings */
60 #define GP2AP020A00F_PS_REG 0x02 /* PS related settings */
61 #define GP2AP020A00F_LED_REG 0x03 /* LED reg */
62 #define GP2AP020A00F_TL_L_REG 0x04 /* ALS: Threshold low LSB */
63 #define GP2AP020A00F_TL_H_REG 0x05 /* ALS: Threshold low MSB */
64 #define GP2AP020A00F_TH_L_REG 0x06 /* ALS: Threshold high LSB */
65 #define GP2AP020A00F_TH_H_REG 0x07 /* ALS: Threshold high MSB */
66 #define GP2AP020A00F_PL_L_REG 0x08 /* PS: Threshold low LSB */
67 #define GP2AP020A00F_PL_H_REG 0x09 /* PS: Threshold low MSB */
68 #define GP2AP020A00F_PH_L_REG 0x0a /* PS: Threshold high LSB */
69 #define GP2AP020A00F_PH_H_REG 0x0b /* PS: Threshold high MSB */
70 #define GP2AP020A00F_D0_L_REG 0x0c /* ALS result: Clear/Illuminance LSB */
71 #define GP2AP020A00F_D0_H_REG 0x0d /* ALS result: Clear/Illuminance MSB */
72 #define GP2AP020A00F_D1_L_REG 0x0e /* ALS result: IR LSB */
73 #define GP2AP020A00F_D1_H_REG 0x0f /* ALS result: IR LSB */
74 #define GP2AP020A00F_D2_L_REG 0x10 /* PS result LSB */
75 #define GP2AP020A00F_D2_H_REG 0x11 /* PS result MSB */
76 #define GP2AP020A00F_NUM_REGS 0x12 /* Number of registers */
78 /* OP_REG bits */
79 #define GP2AP020A00F_OP3_MASK 0x80 /* Software shutdown */
80 #define GP2AP020A00F_OP3_SHUTDOWN 0x00
81 #define GP2AP020A00F_OP3_OPERATION 0x80
82 #define GP2AP020A00F_OP2_MASK 0x40 /* Auto shutdown/Continuous mode */
83 #define GP2AP020A00F_OP2_AUTO_SHUTDOWN 0x00
84 #define GP2AP020A00F_OP2_CONT_OPERATION 0x40
85 #define GP2AP020A00F_OP_MASK 0x30 /* Operating mode selection */
86 #define GP2AP020A00F_OP_ALS_AND_PS 0x00
87 #define GP2AP020A00F_OP_ALS 0x10
88 #define GP2AP020A00F_OP_PS 0x20
89 #define GP2AP020A00F_OP_DEBUG 0x30
90 #define GP2AP020A00F_PROX_MASK 0x08 /* PS: detection/non-detection */
91 #define GP2AP020A00F_PROX_NON_DETECT 0x00
92 #define GP2AP020A00F_PROX_DETECT 0x08
93 #define GP2AP020A00F_FLAG_P 0x04 /* PS: interrupt result */
94 #define GP2AP020A00F_FLAG_A 0x02 /* ALS: interrupt result */
95 #define GP2AP020A00F_TYPE_MASK 0x01 /* Output data type selection */
96 #define GP2AP020A00F_TYPE_MANUAL_CALC 0x00
97 #define GP2AP020A00F_TYPE_AUTO_CALC 0x01
99 /* ALS_REG bits */
100 #define GP2AP020A00F_PRST_MASK 0xc0 /* Number of measurement cycles */
101 #define GP2AP020A00F_PRST_ONCE 0x00
102 #define GP2AP020A00F_PRST_4_CYCLES 0x40
103 #define GP2AP020A00F_PRST_8_CYCLES 0x80
104 #define GP2AP020A00F_PRST_16_CYCLES 0xc0
105 #define GP2AP020A00F_RES_A_MASK 0x38 /* ALS: Resolution */
106 #define GP2AP020A00F_RES_A_800ms 0x00
107 #define GP2AP020A00F_RES_A_400ms 0x08
108 #define GP2AP020A00F_RES_A_200ms 0x10
109 #define GP2AP020A00F_RES_A_100ms 0x18
110 #define GP2AP020A00F_RES_A_25ms 0x20
111 #define GP2AP020A00F_RES_A_6_25ms 0x28
112 #define GP2AP020A00F_RES_A_1_56ms 0x30
113 #define GP2AP020A00F_RES_A_0_39ms 0x38
114 #define GP2AP020A00F_RANGE_A_MASK 0x07 /* ALS: Max measurable range */
115 #define GP2AP020A00F_RANGE_A_x1 0x00
116 #define GP2AP020A00F_RANGE_A_x2 0x01
117 #define GP2AP020A00F_RANGE_A_x4 0x02
118 #define GP2AP020A00F_RANGE_A_x8 0x03
119 #define GP2AP020A00F_RANGE_A_x16 0x04
120 #define GP2AP020A00F_RANGE_A_x32 0x05
121 #define GP2AP020A00F_RANGE_A_x64 0x06
122 #define GP2AP020A00F_RANGE_A_x128 0x07
124 /* PS_REG bits */
125 #define GP2AP020A00F_ALC_MASK 0x80 /* Auto light cancel */
126 #define GP2AP020A00F_ALC_ON 0x80
127 #define GP2AP020A00F_ALC_OFF 0x00
128 #define GP2AP020A00F_INTTYPE_MASK 0x40 /* Interrupt type setting */
129 #define GP2AP020A00F_INTTYPE_LEVEL 0x00
130 #define GP2AP020A00F_INTTYPE_PULSE 0x40
131 #define GP2AP020A00F_RES_P_MASK 0x38 /* PS: Resolution */
132 #define GP2AP020A00F_RES_P_800ms_x2 0x00
133 #define GP2AP020A00F_RES_P_400ms_x2 0x08
134 #define GP2AP020A00F_RES_P_200ms_x2 0x10
135 #define GP2AP020A00F_RES_P_100ms_x2 0x18
136 #define GP2AP020A00F_RES_P_25ms_x2 0x20
137 #define GP2AP020A00F_RES_P_6_25ms_x2 0x28
138 #define GP2AP020A00F_RES_P_1_56ms_x2 0x30
139 #define GP2AP020A00F_RES_P_0_39ms_x2 0x38
140 #define GP2AP020A00F_RANGE_P_MASK 0x07 /* PS: Max measurable range */
141 #define GP2AP020A00F_RANGE_P_x1 0x00
142 #define GP2AP020A00F_RANGE_P_x2 0x01
143 #define GP2AP020A00F_RANGE_P_x4 0x02
144 #define GP2AP020A00F_RANGE_P_x8 0x03
145 #define GP2AP020A00F_RANGE_P_x16 0x04
146 #define GP2AP020A00F_RANGE_P_x32 0x05
147 #define GP2AP020A00F_RANGE_P_x64 0x06
148 #define GP2AP020A00F_RANGE_P_x128 0x07
150 /* LED reg bits */
151 #define GP2AP020A00F_INTVAL_MASK 0xc0 /* Intermittent operating */
152 #define GP2AP020A00F_INTVAL_0 0x00
153 #define GP2AP020A00F_INTVAL_4 0x40
154 #define GP2AP020A00F_INTVAL_8 0x80
155 #define GP2AP020A00F_INTVAL_16 0xc0
156 #define GP2AP020A00F_IS_MASK 0x30 /* ILED drive peak current */
157 #define GP2AP020A00F_IS_13_8mA 0x00
158 #define GP2AP020A00F_IS_27_5mA 0x10
159 #define GP2AP020A00F_IS_55mA 0x20
160 #define GP2AP020A00F_IS_110mA 0x30
161 #define GP2AP020A00F_PIN_MASK 0x0c /* INT terminal setting */
162 #define GP2AP020A00F_PIN_ALS_OR_PS 0x00
163 #define GP2AP020A00F_PIN_ALS 0x04
164 #define GP2AP020A00F_PIN_PS 0x08
165 #define GP2AP020A00F_PIN_PS_DETECT 0x0c
166 #define GP2AP020A00F_FREQ_MASK 0x02 /* LED modulation frequency */
167 #define GP2AP020A00F_FREQ_327_5kHz 0x00
168 #define GP2AP020A00F_FREQ_81_8kHz 0x02
169 #define GP2AP020A00F_RST 0x01 /* Software reset */
171 #define GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR 0
172 #define GP2AP020A00F_SCAN_MODE_LIGHT_IR 1
173 #define GP2AP020A00F_SCAN_MODE_PROXIMITY 2
174 #define GP2AP020A00F_CHAN_TIMESTAMP 3
176 #define GP2AP020A00F_DATA_READY_TIMEOUT msecs_to_jiffies(1000)
177 #define GP2AP020A00F_DATA_REG(chan) (GP2AP020A00F_D0_L_REG + \
178 (chan) * 2)
179 #define GP2AP020A00F_THRESH_REG(th_val_id) (GP2AP020A00F_TL_L_REG + \
180 (th_val_id) * 2)
181 #define GP2AP020A00F_THRESH_VAL_ID(reg_addr) ((reg_addr - 4) / 2)
183 #define GP2AP020A00F_SUBTRACT_MODE 0
184 #define GP2AP020A00F_ADD_MODE 1
186 #define GP2AP020A00F_MAX_CHANNELS 3
188 enum gp2ap020a00f_opmode {
189 GP2AP020A00F_OPMODE_READ_RAW_CLEAR,
190 GP2AP020A00F_OPMODE_READ_RAW_IR,
191 GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY,
192 GP2AP020A00F_OPMODE_ALS,
193 GP2AP020A00F_OPMODE_PS,
194 GP2AP020A00F_OPMODE_ALS_AND_PS,
195 GP2AP020A00F_OPMODE_PROX_DETECT,
196 GP2AP020A00F_OPMODE_SHUTDOWN,
197 GP2AP020A00F_NUM_OPMODES,
200 enum gp2ap020a00f_cmd {
201 GP2AP020A00F_CMD_READ_RAW_CLEAR,
202 GP2AP020A00F_CMD_READ_RAW_IR,
203 GP2AP020A00F_CMD_READ_RAW_PROXIMITY,
204 GP2AP020A00F_CMD_TRIGGER_CLEAR_EN,
205 GP2AP020A00F_CMD_TRIGGER_CLEAR_DIS,
206 GP2AP020A00F_CMD_TRIGGER_IR_EN,
207 GP2AP020A00F_CMD_TRIGGER_IR_DIS,
208 GP2AP020A00F_CMD_TRIGGER_PROX_EN,
209 GP2AP020A00F_CMD_TRIGGER_PROX_DIS,
210 GP2AP020A00F_CMD_ALS_HIGH_EV_EN,
211 GP2AP020A00F_CMD_ALS_HIGH_EV_DIS,
212 GP2AP020A00F_CMD_ALS_LOW_EV_EN,
213 GP2AP020A00F_CMD_ALS_LOW_EV_DIS,
214 GP2AP020A00F_CMD_PROX_HIGH_EV_EN,
215 GP2AP020A00F_CMD_PROX_HIGH_EV_DIS,
216 GP2AP020A00F_CMD_PROX_LOW_EV_EN,
217 GP2AP020A00F_CMD_PROX_LOW_EV_DIS,
220 enum gp2ap020a00f_flags {
221 GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER,
222 GP2AP020A00F_FLAG_ALS_IR_TRIGGER,
223 GP2AP020A00F_FLAG_PROX_TRIGGER,
224 GP2AP020A00F_FLAG_PROX_RISING_EV,
225 GP2AP020A00F_FLAG_PROX_FALLING_EV,
226 GP2AP020A00F_FLAG_ALS_RISING_EV,
227 GP2AP020A00F_FLAG_ALS_FALLING_EV,
228 GP2AP020A00F_FLAG_LUX_MODE_HI,
229 GP2AP020A00F_FLAG_DATA_READY,
232 enum gp2ap020a00f_thresh_val_id {
233 GP2AP020A00F_THRESH_TL,
234 GP2AP020A00F_THRESH_TH,
235 GP2AP020A00F_THRESH_PL,
236 GP2AP020A00F_THRESH_PH,
239 struct gp2ap020a00f_data {
240 const struct gp2ap020a00f_platform_data *pdata;
241 struct i2c_client *client;
242 struct mutex lock;
243 char *buffer;
244 struct regulator *vled_reg;
245 unsigned long flags;
246 enum gp2ap020a00f_opmode cur_opmode;
247 struct iio_trigger *trig;
248 struct regmap *regmap;
249 unsigned int thresh_val[4];
250 u8 debug_reg_addr;
251 struct irq_work work;
252 wait_queue_head_t data_ready_queue;
255 static const u8 gp2ap020a00f_reg_init_tab[] = {
256 [GP2AP020A00F_OP_REG] = GP2AP020A00F_OP3_SHUTDOWN,
257 [GP2AP020A00F_ALS_REG] = GP2AP020A00F_RES_A_25ms |
258 GP2AP020A00F_RANGE_A_x8,
259 [GP2AP020A00F_PS_REG] = GP2AP020A00F_ALC_ON |
260 GP2AP020A00F_RES_P_1_56ms_x2 |
261 GP2AP020A00F_RANGE_P_x4,
262 [GP2AP020A00F_LED_REG] = GP2AP020A00F_INTVAL_0 |
263 GP2AP020A00F_IS_110mA |
264 GP2AP020A00F_FREQ_327_5kHz,
265 [GP2AP020A00F_TL_L_REG] = 0,
266 [GP2AP020A00F_TL_H_REG] = 0,
267 [GP2AP020A00F_TH_L_REG] = 0,
268 [GP2AP020A00F_TH_H_REG] = 0,
269 [GP2AP020A00F_PL_L_REG] = 0,
270 [GP2AP020A00F_PL_H_REG] = 0,
271 [GP2AP020A00F_PH_L_REG] = 0,
272 [GP2AP020A00F_PH_H_REG] = 0,
275 static bool gp2ap020a00f_is_volatile_reg(struct device *dev, unsigned int reg)
277 switch (reg) {
278 case GP2AP020A00F_OP_REG:
279 case GP2AP020A00F_D0_L_REG:
280 case GP2AP020A00F_D0_H_REG:
281 case GP2AP020A00F_D1_L_REG:
282 case GP2AP020A00F_D1_H_REG:
283 case GP2AP020A00F_D2_L_REG:
284 case GP2AP020A00F_D2_H_REG:
285 return true;
286 default:
287 return false;
291 static const struct regmap_config gp2ap020a00f_regmap_config = {
292 .reg_bits = 8,
293 .val_bits = 8,
295 .max_register = GP2AP020A00F_D2_H_REG,
296 .cache_type = REGCACHE_RBTREE,
298 .volatile_reg = gp2ap020a00f_is_volatile_reg,
301 static const struct gp2ap020a00f_mutable_config_regs {
302 u8 op_reg;
303 u8 als_reg;
304 u8 ps_reg;
305 u8 led_reg;
306 } opmode_regs_settings[GP2AP020A00F_NUM_OPMODES] = {
307 [GP2AP020A00F_OPMODE_READ_RAW_CLEAR] = {
308 GP2AP020A00F_OP_ALS | GP2AP020A00F_OP2_CONT_OPERATION
309 | GP2AP020A00F_OP3_OPERATION
310 | GP2AP020A00F_TYPE_AUTO_CALC,
311 GP2AP020A00F_PRST_ONCE,
312 GP2AP020A00F_INTTYPE_LEVEL,
313 GP2AP020A00F_PIN_ALS
315 [GP2AP020A00F_OPMODE_READ_RAW_IR] = {
316 GP2AP020A00F_OP_ALS | GP2AP020A00F_OP2_CONT_OPERATION
317 | GP2AP020A00F_OP3_OPERATION
318 | GP2AP020A00F_TYPE_MANUAL_CALC,
319 GP2AP020A00F_PRST_ONCE,
320 GP2AP020A00F_INTTYPE_LEVEL,
321 GP2AP020A00F_PIN_ALS
323 [GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY] = {
324 GP2AP020A00F_OP_PS | GP2AP020A00F_OP2_CONT_OPERATION
325 | GP2AP020A00F_OP3_OPERATION
326 | GP2AP020A00F_TYPE_MANUAL_CALC,
327 GP2AP020A00F_PRST_ONCE,
328 GP2AP020A00F_INTTYPE_LEVEL,
329 GP2AP020A00F_PIN_PS
331 [GP2AP020A00F_OPMODE_PROX_DETECT] = {
332 GP2AP020A00F_OP_PS | GP2AP020A00F_OP2_CONT_OPERATION
333 | GP2AP020A00F_OP3_OPERATION
334 | GP2AP020A00F_TYPE_MANUAL_CALC,
335 GP2AP020A00F_PRST_4_CYCLES,
336 GP2AP020A00F_INTTYPE_PULSE,
337 GP2AP020A00F_PIN_PS_DETECT
339 [GP2AP020A00F_OPMODE_ALS] = {
340 GP2AP020A00F_OP_ALS | GP2AP020A00F_OP2_CONT_OPERATION
341 | GP2AP020A00F_OP3_OPERATION
342 | GP2AP020A00F_TYPE_AUTO_CALC,
343 GP2AP020A00F_PRST_ONCE,
344 GP2AP020A00F_INTTYPE_LEVEL,
345 GP2AP020A00F_PIN_ALS
347 [GP2AP020A00F_OPMODE_PS] = {
348 GP2AP020A00F_OP_PS | GP2AP020A00F_OP2_CONT_OPERATION
349 | GP2AP020A00F_OP3_OPERATION
350 | GP2AP020A00F_TYPE_MANUAL_CALC,
351 GP2AP020A00F_PRST_4_CYCLES,
352 GP2AP020A00F_INTTYPE_LEVEL,
353 GP2AP020A00F_PIN_PS
355 [GP2AP020A00F_OPMODE_ALS_AND_PS] = {
356 GP2AP020A00F_OP_ALS_AND_PS
357 | GP2AP020A00F_OP2_CONT_OPERATION
358 | GP2AP020A00F_OP3_OPERATION
359 | GP2AP020A00F_TYPE_AUTO_CALC,
360 GP2AP020A00F_PRST_4_CYCLES,
361 GP2AP020A00F_INTTYPE_LEVEL,
362 GP2AP020A00F_PIN_ALS_OR_PS
364 [GP2AP020A00F_OPMODE_SHUTDOWN] = { GP2AP020A00F_OP3_SHUTDOWN, },
367 static int gp2ap020a00f_set_operation_mode(struct gp2ap020a00f_data *data,
368 enum gp2ap020a00f_opmode op)
370 unsigned int op_reg_val;
371 int err;
373 if (op != GP2AP020A00F_OPMODE_SHUTDOWN) {
374 err = regmap_read(data->regmap, GP2AP020A00F_OP_REG,
375 &op_reg_val);
376 if (err < 0)
377 return err;
379 * Shutdown the device if the operation being executed entails
380 * mode transition.
382 if ((opmode_regs_settings[op].op_reg & GP2AP020A00F_OP_MASK) !=
383 (op_reg_val & GP2AP020A00F_OP_MASK)) {
384 /* set shutdown mode */
385 err = regmap_update_bits(data->regmap,
386 GP2AP020A00F_OP_REG, GP2AP020A00F_OP3_MASK,
387 GP2AP020A00F_OP3_SHUTDOWN);
388 if (err < 0)
389 return err;
392 err = regmap_update_bits(data->regmap, GP2AP020A00F_ALS_REG,
393 GP2AP020A00F_PRST_MASK, opmode_regs_settings[op]
394 .als_reg);
395 if (err < 0)
396 return err;
398 err = regmap_update_bits(data->regmap, GP2AP020A00F_PS_REG,
399 GP2AP020A00F_INTTYPE_MASK, opmode_regs_settings[op]
400 .ps_reg);
401 if (err < 0)
402 return err;
404 err = regmap_update_bits(data->regmap, GP2AP020A00F_LED_REG,
405 GP2AP020A00F_PIN_MASK, opmode_regs_settings[op]
406 .led_reg);
407 if (err < 0)
408 return err;
411 /* Set OP_REG and apply operation mode (power on / off) */
412 err = regmap_update_bits(data->regmap,
413 GP2AP020A00F_OP_REG,
414 GP2AP020A00F_OP_MASK | GP2AP020A00F_OP2_MASK |
415 GP2AP020A00F_OP3_MASK | GP2AP020A00F_TYPE_MASK,
416 opmode_regs_settings[op].op_reg);
417 if (err < 0)
418 return err;
420 data->cur_opmode = op;
422 return 0;
425 static bool gp2ap020a00f_als_enabled(struct gp2ap020a00f_data *data)
427 return test_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &data->flags) ||
428 test_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &data->flags) ||
429 test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags) ||
430 test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags);
433 static bool gp2ap020a00f_prox_detect_enabled(struct gp2ap020a00f_data *data)
435 return test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags) ||
436 test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags);
439 static int gp2ap020a00f_write_event_threshold(struct gp2ap020a00f_data *data,
440 enum gp2ap020a00f_thresh_val_id th_val_id,
441 bool enable)
443 __le16 thresh_buf = 0;
444 unsigned int thresh_reg_val;
446 if (!enable)
447 thresh_reg_val = 0;
448 else if (test_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags) &&
449 th_val_id != GP2AP020A00F_THRESH_PL &&
450 th_val_id != GP2AP020A00F_THRESH_PH)
452 * For the high lux mode ALS threshold has to be scaled down
453 * to allow for proper comparison with the output value.
455 thresh_reg_val = data->thresh_val[th_val_id] / 16;
456 else
457 thresh_reg_val = data->thresh_val[th_val_id] > 16000 ?
458 16000 :
459 data->thresh_val[th_val_id];
461 thresh_buf = cpu_to_le16(thresh_reg_val);
463 return regmap_bulk_write(data->regmap,
464 GP2AP020A00F_THRESH_REG(th_val_id),
465 (u8 *)&thresh_buf, 2);
468 static int gp2ap020a00f_alter_opmode(struct gp2ap020a00f_data *data,
469 enum gp2ap020a00f_opmode diff_mode, int add_sub)
471 enum gp2ap020a00f_opmode new_mode;
473 if (diff_mode != GP2AP020A00F_OPMODE_ALS &&
474 diff_mode != GP2AP020A00F_OPMODE_PS)
475 return -EINVAL;
477 if (add_sub == GP2AP020A00F_ADD_MODE) {
478 if (data->cur_opmode == GP2AP020A00F_OPMODE_SHUTDOWN)
479 new_mode = diff_mode;
480 else
481 new_mode = GP2AP020A00F_OPMODE_ALS_AND_PS;
482 } else {
483 if (data->cur_opmode == GP2AP020A00F_OPMODE_ALS_AND_PS)
484 new_mode = (diff_mode == GP2AP020A00F_OPMODE_ALS) ?
485 GP2AP020A00F_OPMODE_PS :
486 GP2AP020A00F_OPMODE_ALS;
487 else
488 new_mode = GP2AP020A00F_OPMODE_SHUTDOWN;
491 return gp2ap020a00f_set_operation_mode(data, new_mode);
494 static int gp2ap020a00f_exec_cmd(struct gp2ap020a00f_data *data,
495 enum gp2ap020a00f_cmd cmd)
497 int err = 0;
499 switch (cmd) {
500 case GP2AP020A00F_CMD_READ_RAW_CLEAR:
501 if (data->cur_opmode != GP2AP020A00F_OPMODE_SHUTDOWN)
502 return -EBUSY;
503 err = gp2ap020a00f_set_operation_mode(data,
504 GP2AP020A00F_OPMODE_READ_RAW_CLEAR);
505 break;
506 case GP2AP020A00F_CMD_READ_RAW_IR:
507 if (data->cur_opmode != GP2AP020A00F_OPMODE_SHUTDOWN)
508 return -EBUSY;
509 err = gp2ap020a00f_set_operation_mode(data,
510 GP2AP020A00F_OPMODE_READ_RAW_IR);
511 break;
512 case GP2AP020A00F_CMD_READ_RAW_PROXIMITY:
513 if (data->cur_opmode != GP2AP020A00F_OPMODE_SHUTDOWN)
514 return -EBUSY;
515 err = gp2ap020a00f_set_operation_mode(data,
516 GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY);
517 break;
518 case GP2AP020A00F_CMD_TRIGGER_CLEAR_EN:
519 if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
520 return -EBUSY;
521 if (!gp2ap020a00f_als_enabled(data))
522 err = gp2ap020a00f_alter_opmode(data,
523 GP2AP020A00F_OPMODE_ALS,
524 GP2AP020A00F_ADD_MODE);
525 set_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &data->flags);
526 break;
527 case GP2AP020A00F_CMD_TRIGGER_CLEAR_DIS:
528 clear_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &data->flags);
529 if (gp2ap020a00f_als_enabled(data))
530 break;
531 err = gp2ap020a00f_alter_opmode(data,
532 GP2AP020A00F_OPMODE_ALS,
533 GP2AP020A00F_SUBTRACT_MODE);
534 break;
535 case GP2AP020A00F_CMD_TRIGGER_IR_EN:
536 if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
537 return -EBUSY;
538 if (!gp2ap020a00f_als_enabled(data))
539 err = gp2ap020a00f_alter_opmode(data,
540 GP2AP020A00F_OPMODE_ALS,
541 GP2AP020A00F_ADD_MODE);
542 set_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &data->flags);
543 break;
544 case GP2AP020A00F_CMD_TRIGGER_IR_DIS:
545 clear_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &data->flags);
546 if (gp2ap020a00f_als_enabled(data))
547 break;
548 err = gp2ap020a00f_alter_opmode(data,
549 GP2AP020A00F_OPMODE_ALS,
550 GP2AP020A00F_SUBTRACT_MODE);
551 break;
552 case GP2AP020A00F_CMD_TRIGGER_PROX_EN:
553 if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
554 return -EBUSY;
555 err = gp2ap020a00f_alter_opmode(data,
556 GP2AP020A00F_OPMODE_PS,
557 GP2AP020A00F_ADD_MODE);
558 set_bit(GP2AP020A00F_FLAG_PROX_TRIGGER, &data->flags);
559 break;
560 case GP2AP020A00F_CMD_TRIGGER_PROX_DIS:
561 clear_bit(GP2AP020A00F_FLAG_PROX_TRIGGER, &data->flags);
562 err = gp2ap020a00f_alter_opmode(data,
563 GP2AP020A00F_OPMODE_PS,
564 GP2AP020A00F_SUBTRACT_MODE);
565 break;
566 case GP2AP020A00F_CMD_ALS_HIGH_EV_EN:
567 if (test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags))
568 return 0;
569 if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
570 return -EBUSY;
571 if (!gp2ap020a00f_als_enabled(data)) {
572 err = gp2ap020a00f_alter_opmode(data,
573 GP2AP020A00F_OPMODE_ALS,
574 GP2AP020A00F_ADD_MODE);
575 if (err < 0)
576 return err;
578 set_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags);
579 err = gp2ap020a00f_write_event_threshold(data,
580 GP2AP020A00F_THRESH_TH, true);
581 break;
582 case GP2AP020A00F_CMD_ALS_HIGH_EV_DIS:
583 if (!test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags))
584 return 0;
585 clear_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags);
586 if (!gp2ap020a00f_als_enabled(data)) {
587 err = gp2ap020a00f_alter_opmode(data,
588 GP2AP020A00F_OPMODE_ALS,
589 GP2AP020A00F_SUBTRACT_MODE);
590 if (err < 0)
591 return err;
593 err = gp2ap020a00f_write_event_threshold(data,
594 GP2AP020A00F_THRESH_TH, false);
595 break;
596 case GP2AP020A00F_CMD_ALS_LOW_EV_EN:
597 if (test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags))
598 return 0;
599 if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT)
600 return -EBUSY;
601 if (!gp2ap020a00f_als_enabled(data)) {
602 err = gp2ap020a00f_alter_opmode(data,
603 GP2AP020A00F_OPMODE_ALS,
604 GP2AP020A00F_ADD_MODE);
605 if (err < 0)
606 return err;
608 set_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags);
609 err = gp2ap020a00f_write_event_threshold(data,
610 GP2AP020A00F_THRESH_TL, true);
611 break;
612 case GP2AP020A00F_CMD_ALS_LOW_EV_DIS:
613 if (!test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags))
614 return 0;
615 clear_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags);
616 if (!gp2ap020a00f_als_enabled(data)) {
617 err = gp2ap020a00f_alter_opmode(data,
618 GP2AP020A00F_OPMODE_ALS,
619 GP2AP020A00F_SUBTRACT_MODE);
620 if (err < 0)
621 return err;
623 err = gp2ap020a00f_write_event_threshold(data,
624 GP2AP020A00F_THRESH_TL, false);
625 break;
626 case GP2AP020A00F_CMD_PROX_HIGH_EV_EN:
627 if (test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags))
628 return 0;
629 if (gp2ap020a00f_als_enabled(data) ||
630 data->cur_opmode == GP2AP020A00F_OPMODE_PS)
631 return -EBUSY;
632 if (!gp2ap020a00f_prox_detect_enabled(data)) {
633 err = gp2ap020a00f_set_operation_mode(data,
634 GP2AP020A00F_OPMODE_PROX_DETECT);
635 if (err < 0)
636 return err;
638 set_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags);
639 err = gp2ap020a00f_write_event_threshold(data,
640 GP2AP020A00F_THRESH_PH, true);
641 break;
642 case GP2AP020A00F_CMD_PROX_HIGH_EV_DIS:
643 if (!test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags))
644 return 0;
645 clear_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags);
646 err = gp2ap020a00f_set_operation_mode(data,
647 GP2AP020A00F_OPMODE_SHUTDOWN);
648 if (err < 0)
649 return err;
650 err = gp2ap020a00f_write_event_threshold(data,
651 GP2AP020A00F_THRESH_PH, false);
652 break;
653 case GP2AP020A00F_CMD_PROX_LOW_EV_EN:
654 if (test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags))
655 return 0;
656 if (gp2ap020a00f_als_enabled(data) ||
657 data->cur_opmode == GP2AP020A00F_OPMODE_PS)
658 return -EBUSY;
659 if (!gp2ap020a00f_prox_detect_enabled(data)) {
660 err = gp2ap020a00f_set_operation_mode(data,
661 GP2AP020A00F_OPMODE_PROX_DETECT);
662 if (err < 0)
663 return err;
665 set_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags);
666 err = gp2ap020a00f_write_event_threshold(data,
667 GP2AP020A00F_THRESH_PL, true);
668 break;
669 case GP2AP020A00F_CMD_PROX_LOW_EV_DIS:
670 if (!test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags))
671 return 0;
672 clear_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags);
673 err = gp2ap020a00f_set_operation_mode(data,
674 GP2AP020A00F_OPMODE_SHUTDOWN);
675 if (err < 0)
676 return err;
677 err = gp2ap020a00f_write_event_threshold(data,
678 GP2AP020A00F_THRESH_PL, false);
679 break;
682 return err;
685 static int wait_conversion_complete_irq(struct gp2ap020a00f_data *data)
687 int ret;
689 ret = wait_event_timeout(data->data_ready_queue,
690 test_bit(GP2AP020A00F_FLAG_DATA_READY,
691 &data->flags),
692 GP2AP020A00F_DATA_READY_TIMEOUT);
693 clear_bit(GP2AP020A00F_FLAG_DATA_READY, &data->flags);
695 return ret > 0 ? 0 : -ETIME;
698 static int gp2ap020a00f_read_output(struct gp2ap020a00f_data *data,
699 unsigned int output_reg, int *val)
701 u8 reg_buf[2];
702 int err;
704 err = wait_conversion_complete_irq(data);
705 if (err < 0)
706 dev_dbg(&data->client->dev, "data ready timeout\n");
708 err = regmap_bulk_read(data->regmap, output_reg, reg_buf, 2);
709 if (err < 0)
710 return err;
712 *val = le16_to_cpup((__le16 *)reg_buf);
714 return err;
717 static bool gp2ap020a00f_adjust_lux_mode(struct gp2ap020a00f_data *data,
718 int output_val)
720 u8 new_range = 0xff;
721 int err;
723 if (!test_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags)) {
724 if (output_val > 16000) {
725 set_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags);
726 new_range = GP2AP020A00F_RANGE_A_x128;
728 } else {
729 if (output_val < 1000) {
730 clear_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags);
731 new_range = GP2AP020A00F_RANGE_A_x8;
735 if (new_range != 0xff) {
736 /* Clear als threshold registers to avoid spurious
737 * events caused by lux mode transition.
739 err = gp2ap020a00f_write_event_threshold(data,
740 GP2AP020A00F_THRESH_TH, false);
741 if (err < 0) {
742 dev_err(&data->client->dev,
743 "Clearing als threshold register failed.\n");
744 return false;
747 err = gp2ap020a00f_write_event_threshold(data,
748 GP2AP020A00F_THRESH_TL, false);
749 if (err < 0) {
750 dev_err(&data->client->dev,
751 "Clearing als threshold register failed.\n");
752 return false;
755 /* Change lux mode */
756 err = regmap_update_bits(data->regmap,
757 GP2AP020A00F_OP_REG,
758 GP2AP020A00F_OP3_MASK,
759 GP2AP020A00F_OP3_SHUTDOWN);
761 if (err < 0) {
762 dev_err(&data->client->dev,
763 "Shutting down the device failed.\n");
764 return false;
767 err = regmap_update_bits(data->regmap,
768 GP2AP020A00F_ALS_REG,
769 GP2AP020A00F_RANGE_A_MASK,
770 new_range);
772 if (err < 0) {
773 dev_err(&data->client->dev,
774 "Adjusting device lux mode failed.\n");
775 return false;
778 err = regmap_update_bits(data->regmap,
779 GP2AP020A00F_OP_REG,
780 GP2AP020A00F_OP3_MASK,
781 GP2AP020A00F_OP3_OPERATION);
783 if (err < 0) {
784 dev_err(&data->client->dev,
785 "Powering up the device failed.\n");
786 return false;
789 /* Adjust als threshold register values to the new lux mode */
790 if (test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags)) {
791 err = gp2ap020a00f_write_event_threshold(data,
792 GP2AP020A00F_THRESH_TH, true);
793 if (err < 0) {
794 dev_err(&data->client->dev,
795 "Adjusting als threshold value failed.\n");
796 return false;
800 if (test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags)) {
801 err = gp2ap020a00f_write_event_threshold(data,
802 GP2AP020A00F_THRESH_TL, true);
803 if (err < 0) {
804 dev_err(&data->client->dev,
805 "Adjusting als threshold value failed.\n");
806 return false;
810 return true;
813 return false;
816 static void gp2ap020a00f_output_to_lux(struct gp2ap020a00f_data *data,
817 int *output_val)
819 if (test_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags))
820 *output_val *= 16;
823 static void gp2ap020a00f_iio_trigger_work(struct irq_work *work)
825 struct gp2ap020a00f_data *data =
826 container_of(work, struct gp2ap020a00f_data, work);
828 iio_trigger_poll(data->trig);
831 static irqreturn_t gp2ap020a00f_prox_sensing_handler(int irq, void *data)
833 struct iio_dev *indio_dev = data;
834 struct gp2ap020a00f_data *priv = iio_priv(indio_dev);
835 unsigned int op_reg_val;
836 int ret;
838 /* Read interrupt flags */
839 ret = regmap_read(priv->regmap, GP2AP020A00F_OP_REG, &op_reg_val);
840 if (ret < 0)
841 return IRQ_HANDLED;
843 if (gp2ap020a00f_prox_detect_enabled(priv)) {
844 if (op_reg_val & GP2AP020A00F_PROX_DETECT) {
845 iio_push_event(indio_dev,
846 IIO_UNMOD_EVENT_CODE(
847 IIO_PROXIMITY,
848 GP2AP020A00F_SCAN_MODE_PROXIMITY,
849 IIO_EV_TYPE_ROC,
850 IIO_EV_DIR_RISING),
851 iio_get_time_ns(indio_dev));
852 } else {
853 iio_push_event(indio_dev,
854 IIO_UNMOD_EVENT_CODE(
855 IIO_PROXIMITY,
856 GP2AP020A00F_SCAN_MODE_PROXIMITY,
857 IIO_EV_TYPE_ROC,
858 IIO_EV_DIR_FALLING),
859 iio_get_time_ns(indio_dev));
863 return IRQ_HANDLED;
866 static irqreturn_t gp2ap020a00f_thresh_event_handler(int irq, void *data)
868 struct iio_dev *indio_dev = data;
869 struct gp2ap020a00f_data *priv = iio_priv(indio_dev);
870 u8 op_reg_flags, d0_reg_buf[2];
871 unsigned int output_val, op_reg_val;
872 int thresh_val_id, ret;
874 /* Read interrupt flags */
875 ret = regmap_read(priv->regmap, GP2AP020A00F_OP_REG,
876 &op_reg_val);
877 if (ret < 0)
878 goto done;
880 op_reg_flags = op_reg_val & (GP2AP020A00F_FLAG_A | GP2AP020A00F_FLAG_P
881 | GP2AP020A00F_PROX_DETECT);
883 op_reg_val &= (~GP2AP020A00F_FLAG_A & ~GP2AP020A00F_FLAG_P
884 & ~GP2AP020A00F_PROX_DETECT);
886 /* Clear interrupt flags (if not in INTTYPE_PULSE mode) */
887 if (priv->cur_opmode != GP2AP020A00F_OPMODE_PROX_DETECT) {
888 ret = regmap_write(priv->regmap, GP2AP020A00F_OP_REG,
889 op_reg_val);
890 if (ret < 0)
891 goto done;
894 if (op_reg_flags & GP2AP020A00F_FLAG_A) {
895 /* Check D0 register to assess if the lux mode
896 * transition is required.
898 ret = regmap_bulk_read(priv->regmap, GP2AP020A00F_D0_L_REG,
899 d0_reg_buf, 2);
900 if (ret < 0)
901 goto done;
903 output_val = le16_to_cpup((__le16 *)d0_reg_buf);
905 if (gp2ap020a00f_adjust_lux_mode(priv, output_val))
906 goto done;
908 gp2ap020a00f_output_to_lux(priv, &output_val);
911 * We need to check output value to distinguish
912 * between high and low ambient light threshold event.
914 if (test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &priv->flags)) {
915 thresh_val_id =
916 GP2AP020A00F_THRESH_VAL_ID(GP2AP020A00F_TH_L_REG);
917 if (output_val > priv->thresh_val[thresh_val_id])
918 iio_push_event(indio_dev,
919 IIO_MOD_EVENT_CODE(
920 IIO_LIGHT,
921 GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR,
922 IIO_MOD_LIGHT_CLEAR,
923 IIO_EV_TYPE_THRESH,
924 IIO_EV_DIR_RISING),
925 iio_get_time_ns(indio_dev));
928 if (test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &priv->flags)) {
929 thresh_val_id =
930 GP2AP020A00F_THRESH_VAL_ID(GP2AP020A00F_TL_L_REG);
931 if (output_val < priv->thresh_val[thresh_val_id])
932 iio_push_event(indio_dev,
933 IIO_MOD_EVENT_CODE(
934 IIO_LIGHT,
935 GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR,
936 IIO_MOD_LIGHT_CLEAR,
937 IIO_EV_TYPE_THRESH,
938 IIO_EV_DIR_FALLING),
939 iio_get_time_ns(indio_dev));
943 if (priv->cur_opmode == GP2AP020A00F_OPMODE_READ_RAW_CLEAR ||
944 priv->cur_opmode == GP2AP020A00F_OPMODE_READ_RAW_IR ||
945 priv->cur_opmode == GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY) {
946 set_bit(GP2AP020A00F_FLAG_DATA_READY, &priv->flags);
947 wake_up(&priv->data_ready_queue);
948 goto done;
951 if (test_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &priv->flags) ||
952 test_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &priv->flags) ||
953 test_bit(GP2AP020A00F_FLAG_PROX_TRIGGER, &priv->flags))
954 /* This fires off the trigger. */
955 irq_work_queue(&priv->work);
957 done:
958 return IRQ_HANDLED;
961 static irqreturn_t gp2ap020a00f_trigger_handler(int irq, void *data)
963 struct iio_poll_func *pf = data;
964 struct iio_dev *indio_dev = pf->indio_dev;
965 struct gp2ap020a00f_data *priv = iio_priv(indio_dev);
966 size_t d_size = 0;
967 int i, out_val, ret;
969 for_each_set_bit(i, indio_dev->active_scan_mask,
970 indio_dev->masklength) {
971 ret = regmap_bulk_read(priv->regmap,
972 GP2AP020A00F_DATA_REG(i),
973 &priv->buffer[d_size], 2);
974 if (ret < 0)
975 goto done;
977 if (i == GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR ||
978 i == GP2AP020A00F_SCAN_MODE_LIGHT_IR) {
979 out_val = le16_to_cpup((__le16 *)&priv->buffer[d_size]);
980 gp2ap020a00f_output_to_lux(priv, &out_val);
982 put_unaligned_le32(out_val, &priv->buffer[d_size]);
983 d_size += 4;
984 } else {
985 d_size += 2;
989 iio_push_to_buffers_with_timestamp(indio_dev, priv->buffer,
990 pf->timestamp);
991 done:
992 iio_trigger_notify_done(indio_dev->trig);
994 return IRQ_HANDLED;
997 static u8 gp2ap020a00f_get_thresh_reg(const struct iio_chan_spec *chan,
998 enum iio_event_direction event_dir)
1000 switch (chan->type) {
1001 case IIO_PROXIMITY:
1002 if (event_dir == IIO_EV_DIR_RISING)
1003 return GP2AP020A00F_PH_L_REG;
1004 else
1005 return GP2AP020A00F_PL_L_REG;
1006 case IIO_LIGHT:
1007 if (event_dir == IIO_EV_DIR_RISING)
1008 return GP2AP020A00F_TH_L_REG;
1009 else
1010 return GP2AP020A00F_TL_L_REG;
1011 default:
1012 break;
1015 return -EINVAL;
1018 static int gp2ap020a00f_write_event_val(struct iio_dev *indio_dev,
1019 const struct iio_chan_spec *chan,
1020 enum iio_event_type type,
1021 enum iio_event_direction dir,
1022 enum iio_event_info info,
1023 int val, int val2)
1025 struct gp2ap020a00f_data *data = iio_priv(indio_dev);
1026 bool event_en = false;
1027 u8 thresh_val_id;
1028 u8 thresh_reg_l;
1029 int err = 0;
1031 mutex_lock(&data->lock);
1033 thresh_reg_l = gp2ap020a00f_get_thresh_reg(chan, dir);
1034 thresh_val_id = GP2AP020A00F_THRESH_VAL_ID(thresh_reg_l);
1036 if (thresh_val_id > GP2AP020A00F_THRESH_PH) {
1037 err = -EINVAL;
1038 goto error_unlock;
1041 switch (thresh_reg_l) {
1042 case GP2AP020A00F_TH_L_REG:
1043 event_en = test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV,
1044 &data->flags);
1045 break;
1046 case GP2AP020A00F_TL_L_REG:
1047 event_en = test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV,
1048 &data->flags);
1049 break;
1050 case GP2AP020A00F_PH_L_REG:
1051 if (val == 0) {
1052 err = -EINVAL;
1053 goto error_unlock;
1055 event_en = test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV,
1056 &data->flags);
1057 break;
1058 case GP2AP020A00F_PL_L_REG:
1059 if (val == 0) {
1060 err = -EINVAL;
1061 goto error_unlock;
1063 event_en = test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV,
1064 &data->flags);
1065 break;
1068 data->thresh_val[thresh_val_id] = val;
1069 err = gp2ap020a00f_write_event_threshold(data, thresh_val_id,
1070 event_en);
1071 error_unlock:
1072 mutex_unlock(&data->lock);
1074 return err;
1077 static int gp2ap020a00f_read_event_val(struct iio_dev *indio_dev,
1078 const struct iio_chan_spec *chan,
1079 enum iio_event_type type,
1080 enum iio_event_direction dir,
1081 enum iio_event_info info,
1082 int *val, int *val2)
1084 struct gp2ap020a00f_data *data = iio_priv(indio_dev);
1085 u8 thresh_reg_l;
1086 int err = IIO_VAL_INT;
1088 mutex_lock(&data->lock);
1090 thresh_reg_l = gp2ap020a00f_get_thresh_reg(chan, dir);
1092 if (thresh_reg_l > GP2AP020A00F_PH_L_REG) {
1093 err = -EINVAL;
1094 goto error_unlock;
1097 *val = data->thresh_val[GP2AP020A00F_THRESH_VAL_ID(thresh_reg_l)];
1099 error_unlock:
1100 mutex_unlock(&data->lock);
1102 return err;
1105 static int gp2ap020a00f_write_prox_event_config(struct iio_dev *indio_dev,
1106 int state)
1108 struct gp2ap020a00f_data *data = iio_priv(indio_dev);
1109 enum gp2ap020a00f_cmd cmd_high_ev, cmd_low_ev;
1110 int err;
1112 cmd_high_ev = state ? GP2AP020A00F_CMD_PROX_HIGH_EV_EN :
1113 GP2AP020A00F_CMD_PROX_HIGH_EV_DIS;
1114 cmd_low_ev = state ? GP2AP020A00F_CMD_PROX_LOW_EV_EN :
1115 GP2AP020A00F_CMD_PROX_LOW_EV_DIS;
1118 * In order to enable proximity detection feature in the device
1119 * both high and low threshold registers have to be written
1120 * with different values, greater than zero.
1122 if (state) {
1123 if (data->thresh_val[GP2AP020A00F_THRESH_PL] == 0)
1124 return -EINVAL;
1126 if (data->thresh_val[GP2AP020A00F_THRESH_PH] == 0)
1127 return -EINVAL;
1130 err = gp2ap020a00f_exec_cmd(data, cmd_high_ev);
1131 if (err < 0)
1132 return err;
1134 err = gp2ap020a00f_exec_cmd(data, cmd_low_ev);
1135 if (err < 0)
1136 return err;
1138 free_irq(data->client->irq, indio_dev);
1140 if (state)
1141 err = request_threaded_irq(data->client->irq, NULL,
1142 &gp2ap020a00f_prox_sensing_handler,
1143 IRQF_TRIGGER_RISING |
1144 IRQF_TRIGGER_FALLING |
1145 IRQF_ONESHOT,
1146 "gp2ap020a00f_prox_sensing",
1147 indio_dev);
1148 else {
1149 err = request_threaded_irq(data->client->irq, NULL,
1150 &gp2ap020a00f_thresh_event_handler,
1151 IRQF_TRIGGER_FALLING |
1152 IRQF_ONESHOT,
1153 "gp2ap020a00f_thresh_event",
1154 indio_dev);
1157 return err;
1160 static int gp2ap020a00f_write_event_config(struct iio_dev *indio_dev,
1161 const struct iio_chan_spec *chan,
1162 enum iio_event_type type,
1163 enum iio_event_direction dir,
1164 int state)
1166 struct gp2ap020a00f_data *data = iio_priv(indio_dev);
1167 enum gp2ap020a00f_cmd cmd;
1168 int err;
1170 mutex_lock(&data->lock);
1172 switch (chan->type) {
1173 case IIO_PROXIMITY:
1174 err = gp2ap020a00f_write_prox_event_config(indio_dev, state);
1175 break;
1176 case IIO_LIGHT:
1177 if (dir == IIO_EV_DIR_RISING) {
1178 cmd = state ? GP2AP020A00F_CMD_ALS_HIGH_EV_EN :
1179 GP2AP020A00F_CMD_ALS_HIGH_EV_DIS;
1180 err = gp2ap020a00f_exec_cmd(data, cmd);
1181 } else {
1182 cmd = state ? GP2AP020A00F_CMD_ALS_LOW_EV_EN :
1183 GP2AP020A00F_CMD_ALS_LOW_EV_DIS;
1184 err = gp2ap020a00f_exec_cmd(data, cmd);
1186 break;
1187 default:
1188 err = -EINVAL;
1191 mutex_unlock(&data->lock);
1193 return err;
1196 static int gp2ap020a00f_read_event_config(struct iio_dev *indio_dev,
1197 const struct iio_chan_spec *chan,
1198 enum iio_event_type type,
1199 enum iio_event_direction dir)
1201 struct gp2ap020a00f_data *data = iio_priv(indio_dev);
1202 int event_en = 0;
1204 mutex_lock(&data->lock);
1206 switch (chan->type) {
1207 case IIO_PROXIMITY:
1208 if (dir == IIO_EV_DIR_RISING)
1209 event_en = test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV,
1210 &data->flags);
1211 else
1212 event_en = test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV,
1213 &data->flags);
1214 break;
1215 case IIO_LIGHT:
1216 if (dir == IIO_EV_DIR_RISING)
1217 event_en = test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV,
1218 &data->flags);
1219 else
1220 event_en = test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV,
1221 &data->flags);
1222 break;
1223 default:
1224 event_en = -EINVAL;
1225 break;
1228 mutex_unlock(&data->lock);
1230 return event_en;
1233 static int gp2ap020a00f_read_channel(struct gp2ap020a00f_data *data,
1234 struct iio_chan_spec const *chan, int *val)
1236 enum gp2ap020a00f_cmd cmd;
1237 int err;
1239 switch (chan->scan_index) {
1240 case GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR:
1241 cmd = GP2AP020A00F_CMD_READ_RAW_CLEAR;
1242 break;
1243 case GP2AP020A00F_SCAN_MODE_LIGHT_IR:
1244 cmd = GP2AP020A00F_CMD_READ_RAW_IR;
1245 break;
1246 case GP2AP020A00F_SCAN_MODE_PROXIMITY:
1247 cmd = GP2AP020A00F_CMD_READ_RAW_PROXIMITY;
1248 break;
1249 default:
1250 return -EINVAL;
1253 err = gp2ap020a00f_exec_cmd(data, cmd);
1254 if (err < 0) {
1255 dev_err(&data->client->dev,
1256 "gp2ap020a00f_exec_cmd failed\n");
1257 goto error_ret;
1260 err = gp2ap020a00f_read_output(data, chan->address, val);
1261 if (err < 0)
1262 dev_err(&data->client->dev,
1263 "gp2ap020a00f_read_output failed\n");
1265 err = gp2ap020a00f_set_operation_mode(data,
1266 GP2AP020A00F_OPMODE_SHUTDOWN);
1267 if (err < 0)
1268 dev_err(&data->client->dev,
1269 "Failed to shut down the device.\n");
1271 if (cmd == GP2AP020A00F_CMD_READ_RAW_CLEAR ||
1272 cmd == GP2AP020A00F_CMD_READ_RAW_IR)
1273 gp2ap020a00f_output_to_lux(data, val);
1275 error_ret:
1276 return err;
1279 static int gp2ap020a00f_read_raw(struct iio_dev *indio_dev,
1280 struct iio_chan_spec const *chan,
1281 int *val, int *val2,
1282 long mask)
1284 struct gp2ap020a00f_data *data = iio_priv(indio_dev);
1285 int err = -EINVAL;
1287 if (mask == IIO_CHAN_INFO_RAW) {
1288 err = iio_device_claim_direct_mode(indio_dev);
1289 if (err)
1290 return err;
1292 err = gp2ap020a00f_read_channel(data, chan, val);
1293 iio_device_release_direct_mode(indio_dev);
1295 return err < 0 ? err : IIO_VAL_INT;
1298 static const struct iio_event_spec gp2ap020a00f_event_spec_light[] = {
1300 .type = IIO_EV_TYPE_THRESH,
1301 .dir = IIO_EV_DIR_RISING,
1302 .mask_separate = BIT(IIO_EV_INFO_VALUE) |
1303 BIT(IIO_EV_INFO_ENABLE),
1304 }, {
1305 .type = IIO_EV_TYPE_THRESH,
1306 .dir = IIO_EV_DIR_FALLING,
1307 .mask_separate = BIT(IIO_EV_INFO_VALUE) |
1308 BIT(IIO_EV_INFO_ENABLE),
1312 static const struct iio_event_spec gp2ap020a00f_event_spec_prox[] = {
1314 .type = IIO_EV_TYPE_ROC,
1315 .dir = IIO_EV_DIR_RISING,
1316 .mask_separate = BIT(IIO_EV_INFO_VALUE) |
1317 BIT(IIO_EV_INFO_ENABLE),
1318 }, {
1319 .type = IIO_EV_TYPE_ROC,
1320 .dir = IIO_EV_DIR_FALLING,
1321 .mask_separate = BIT(IIO_EV_INFO_VALUE) |
1322 BIT(IIO_EV_INFO_ENABLE),
1326 static const struct iio_chan_spec gp2ap020a00f_channels[] = {
1328 .type = IIO_LIGHT,
1329 .channel2 = IIO_MOD_LIGHT_CLEAR,
1330 .modified = 1,
1331 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
1332 .scan_type = {
1333 .sign = 'u',
1334 .realbits = 24,
1335 .shift = 0,
1336 .storagebits = 32,
1337 .endianness = IIO_LE,
1339 .scan_index = GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR,
1340 .address = GP2AP020A00F_D0_L_REG,
1341 .event_spec = gp2ap020a00f_event_spec_light,
1342 .num_event_specs = ARRAY_SIZE(gp2ap020a00f_event_spec_light),
1345 .type = IIO_LIGHT,
1346 .channel2 = IIO_MOD_LIGHT_IR,
1347 .modified = 1,
1348 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
1349 .scan_type = {
1350 .sign = 'u',
1351 .realbits = 24,
1352 .shift = 0,
1353 .storagebits = 32,
1354 .endianness = IIO_LE,
1356 .scan_index = GP2AP020A00F_SCAN_MODE_LIGHT_IR,
1357 .address = GP2AP020A00F_D1_L_REG,
1360 .type = IIO_PROXIMITY,
1361 .modified = 0,
1362 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
1363 .scan_type = {
1364 .sign = 'u',
1365 .realbits = 16,
1366 .shift = 0,
1367 .storagebits = 16,
1368 .endianness = IIO_LE,
1370 .scan_index = GP2AP020A00F_SCAN_MODE_PROXIMITY,
1371 .address = GP2AP020A00F_D2_L_REG,
1372 .event_spec = gp2ap020a00f_event_spec_prox,
1373 .num_event_specs = ARRAY_SIZE(gp2ap020a00f_event_spec_prox),
1375 IIO_CHAN_SOFT_TIMESTAMP(GP2AP020A00F_CHAN_TIMESTAMP),
1378 static const struct iio_info gp2ap020a00f_info = {
1379 .read_raw = &gp2ap020a00f_read_raw,
1380 .read_event_value = &gp2ap020a00f_read_event_val,
1381 .read_event_config = &gp2ap020a00f_read_event_config,
1382 .write_event_value = &gp2ap020a00f_write_event_val,
1383 .write_event_config = &gp2ap020a00f_write_event_config,
1386 static int gp2ap020a00f_buffer_postenable(struct iio_dev *indio_dev)
1388 struct gp2ap020a00f_data *data = iio_priv(indio_dev);
1389 int i, err = 0;
1391 mutex_lock(&data->lock);
1394 * Enable triggers according to the scan_mask. Enabling either
1395 * LIGHT_CLEAR or LIGHT_IR scan mode results in enabling ALS
1396 * module in the device, which generates samples in both D0 (clear)
1397 * and D1 (ir) registers. As the two registers are bound to the
1398 * two separate IIO channels they are treated in the driver logic
1399 * as if they were controlled independently.
1401 for_each_set_bit(i, indio_dev->active_scan_mask,
1402 indio_dev->masklength) {
1403 switch (i) {
1404 case GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR:
1405 err = gp2ap020a00f_exec_cmd(data,
1406 GP2AP020A00F_CMD_TRIGGER_CLEAR_EN);
1407 break;
1408 case GP2AP020A00F_SCAN_MODE_LIGHT_IR:
1409 err = gp2ap020a00f_exec_cmd(data,
1410 GP2AP020A00F_CMD_TRIGGER_IR_EN);
1411 break;
1412 case GP2AP020A00F_SCAN_MODE_PROXIMITY:
1413 err = gp2ap020a00f_exec_cmd(data,
1414 GP2AP020A00F_CMD_TRIGGER_PROX_EN);
1415 break;
1419 if (err < 0)
1420 goto error_unlock;
1422 data->buffer = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
1423 if (!data->buffer)
1424 err = -ENOMEM;
1426 error_unlock:
1427 mutex_unlock(&data->lock);
1429 return err;
1432 static int gp2ap020a00f_buffer_predisable(struct iio_dev *indio_dev)
1434 struct gp2ap020a00f_data *data = iio_priv(indio_dev);
1435 int i, err = 0;
1437 mutex_lock(&data->lock);
1439 for_each_set_bit(i, indio_dev->active_scan_mask,
1440 indio_dev->masklength) {
1441 switch (i) {
1442 case GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR:
1443 err = gp2ap020a00f_exec_cmd(data,
1444 GP2AP020A00F_CMD_TRIGGER_CLEAR_DIS);
1445 break;
1446 case GP2AP020A00F_SCAN_MODE_LIGHT_IR:
1447 err = gp2ap020a00f_exec_cmd(data,
1448 GP2AP020A00F_CMD_TRIGGER_IR_DIS);
1449 break;
1450 case GP2AP020A00F_SCAN_MODE_PROXIMITY:
1451 err = gp2ap020a00f_exec_cmd(data,
1452 GP2AP020A00F_CMD_TRIGGER_PROX_DIS);
1453 break;
1457 if (err == 0)
1458 kfree(data->buffer);
1460 mutex_unlock(&data->lock);
1462 return err;
1465 static const struct iio_buffer_setup_ops gp2ap020a00f_buffer_setup_ops = {
1466 .postenable = &gp2ap020a00f_buffer_postenable,
1467 .predisable = &gp2ap020a00f_buffer_predisable,
1470 static const struct iio_trigger_ops gp2ap020a00f_trigger_ops = {
1473 static int gp2ap020a00f_probe(struct i2c_client *client,
1474 const struct i2c_device_id *id)
1476 struct gp2ap020a00f_data *data;
1477 struct iio_dev *indio_dev;
1478 struct regmap *regmap;
1479 int err;
1481 indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
1482 if (!indio_dev)
1483 return -ENOMEM;
1485 data = iio_priv(indio_dev);
1487 data->vled_reg = devm_regulator_get(&client->dev, "vled");
1488 if (IS_ERR(data->vled_reg))
1489 return PTR_ERR(data->vled_reg);
1491 err = regulator_enable(data->vled_reg);
1492 if (err)
1493 return err;
1495 regmap = devm_regmap_init_i2c(client, &gp2ap020a00f_regmap_config);
1496 if (IS_ERR(regmap)) {
1497 dev_err(&client->dev, "Regmap initialization failed.\n");
1498 err = PTR_ERR(regmap);
1499 goto error_regulator_disable;
1502 /* Initialize device registers */
1503 err = regmap_bulk_write(regmap, GP2AP020A00F_OP_REG,
1504 gp2ap020a00f_reg_init_tab,
1505 ARRAY_SIZE(gp2ap020a00f_reg_init_tab));
1507 if (err < 0) {
1508 dev_err(&client->dev, "Device initialization failed.\n");
1509 goto error_regulator_disable;
1512 i2c_set_clientdata(client, indio_dev);
1514 data->client = client;
1515 data->cur_opmode = GP2AP020A00F_OPMODE_SHUTDOWN;
1516 data->regmap = regmap;
1517 init_waitqueue_head(&data->data_ready_queue);
1519 mutex_init(&data->lock);
1520 indio_dev->channels = gp2ap020a00f_channels;
1521 indio_dev->num_channels = ARRAY_SIZE(gp2ap020a00f_channels);
1522 indio_dev->info = &gp2ap020a00f_info;
1523 indio_dev->name = id->name;
1524 indio_dev->modes = INDIO_DIRECT_MODE;
1526 /* Allocate buffer */
1527 err = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
1528 &gp2ap020a00f_trigger_handler, &gp2ap020a00f_buffer_setup_ops);
1529 if (err < 0)
1530 goto error_regulator_disable;
1532 /* Allocate trigger */
1533 data->trig = devm_iio_trigger_alloc(&client->dev, "%s-trigger",
1534 indio_dev->name);
1535 if (data->trig == NULL) {
1536 err = -ENOMEM;
1537 dev_err(&indio_dev->dev, "Failed to allocate iio trigger.\n");
1538 goto error_uninit_buffer;
1541 /* This needs to be requested here for read_raw calls to work. */
1542 err = request_threaded_irq(client->irq, NULL,
1543 &gp2ap020a00f_thresh_event_handler,
1544 IRQF_TRIGGER_FALLING |
1545 IRQF_ONESHOT,
1546 "gp2ap020a00f_als_event",
1547 indio_dev);
1548 if (err < 0) {
1549 dev_err(&client->dev, "Irq request failed.\n");
1550 goto error_uninit_buffer;
1553 data->trig->ops = &gp2ap020a00f_trigger_ops;
1554 data->trig->dev.parent = &data->client->dev;
1556 init_irq_work(&data->work, gp2ap020a00f_iio_trigger_work);
1558 err = iio_trigger_register(data->trig);
1559 if (err < 0) {
1560 dev_err(&client->dev, "Failed to register iio trigger.\n");
1561 goto error_free_irq;
1564 err = iio_device_register(indio_dev);
1565 if (err < 0)
1566 goto error_trigger_unregister;
1568 return 0;
1570 error_trigger_unregister:
1571 iio_trigger_unregister(data->trig);
1572 error_free_irq:
1573 free_irq(client->irq, indio_dev);
1574 error_uninit_buffer:
1575 iio_triggered_buffer_cleanup(indio_dev);
1576 error_regulator_disable:
1577 regulator_disable(data->vled_reg);
1579 return err;
1582 static int gp2ap020a00f_remove(struct i2c_client *client)
1584 struct iio_dev *indio_dev = i2c_get_clientdata(client);
1585 struct gp2ap020a00f_data *data = iio_priv(indio_dev);
1586 int err;
1588 err = gp2ap020a00f_set_operation_mode(data,
1589 GP2AP020A00F_OPMODE_SHUTDOWN);
1590 if (err < 0)
1591 dev_err(&indio_dev->dev, "Failed to power off the device.\n");
1593 iio_device_unregister(indio_dev);
1594 iio_trigger_unregister(data->trig);
1595 free_irq(client->irq, indio_dev);
1596 iio_triggered_buffer_cleanup(indio_dev);
1597 regulator_disable(data->vled_reg);
1599 return 0;
1602 static const struct i2c_device_id gp2ap020a00f_id[] = {
1603 { GP2A_I2C_NAME, 0 },
1607 MODULE_DEVICE_TABLE(i2c, gp2ap020a00f_id);
1609 static const struct of_device_id gp2ap020a00f_of_match[] = {
1610 { .compatible = "sharp,gp2ap020a00f" },
1613 MODULE_DEVICE_TABLE(of, gp2ap020a00f_of_match);
1615 static struct i2c_driver gp2ap020a00f_driver = {
1616 .driver = {
1617 .name = GP2A_I2C_NAME,
1618 .of_match_table = gp2ap020a00f_of_match,
1620 .probe = gp2ap020a00f_probe,
1621 .remove = gp2ap020a00f_remove,
1622 .id_table = gp2ap020a00f_id,
1625 module_i2c_driver(gp2ap020a00f_driver);
1627 MODULE_AUTHOR("Jacek Anaszewski <j.anaszewski@samsung.com>");
1628 MODULE_DESCRIPTION("Sharp GP2AP020A00F Proximity/ALS sensor driver");
1629 MODULE_LICENSE("GPL v2");