drivers/iio/magnetometer/hid-sensor-magn-3d.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * HID Sensors Driver
   4  * Copyright (c) 2012, Intel Corporation.
   5  */
   6 #include <linux/device.h>
   7 #include <linux/platform_device.h>
   8 #include <linux/module.h>
   9 #include <linux/interrupt.h>
  10 #include <linux/irq.h>
  11 #include <linux/slab.h>
  12 #include <linux/delay.h>
  13 #include <linux/hid-sensor-hub.h>
  14 #include <linux/iio/iio.h>
  15 #include <linux/iio/sysfs.h>
  16 #include <linux/iio/buffer.h>
  17 #include "../common/hid-sensors/hid-sensor-trigger.h"
  18
  19 enum magn_3d_channel {
  20         CHANNEL_SCAN_INDEX_X,
  21         CHANNEL_SCAN_INDEX_Y,
  22         CHANNEL_SCAN_INDEX_Z,
  23         CHANNEL_SCAN_INDEX_NORTH_MAGN_TILT_COMP,
  24         CHANNEL_SCAN_INDEX_NORTH_TRUE_TILT_COMP,
  25         CHANNEL_SCAN_INDEX_NORTH_MAGN,
  26         CHANNEL_SCAN_INDEX_NORTH_TRUE,
  27         MAGN_3D_CHANNEL_MAX,
  28 };
  29
  30 struct common_attributes {
  31         int scale_pre_decml;
  32         int scale_post_decml;
  33         int scale_precision;
  34         int value_offset;
  35 };
  36
  37 struct magn_3d_state {
  38         struct hid_sensor_hub_callbacks callbacks;
  39         struct hid_sensor_common magn_flux_attributes;
  40         struct hid_sensor_common rot_attributes;
  41         struct hid_sensor_hub_attribute_info magn[MAGN_3D_CHANNEL_MAX];
  42
  43         /* dynamically sized array to hold sensor values */
  44         u32 *iio_vals;
  45         /* array of pointers to sensor value */
  46         u32 *magn_val_addr[MAGN_3D_CHANNEL_MAX];
  47
  48         struct common_attributes magn_flux_attr;
  49         struct common_attributes rot_attr;
  50 };
  51
  52 static const u32 magn_3d_addresses[MAGN_3D_CHANNEL_MAX] = {
  53         HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS,
  54         HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Y_AXIS,
  55         HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Z_AXIS,
  56         HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH,
  57         HID_USAGE_SENSOR_ORIENT_COMP_TRUE_NORTH,
  58         HID_USAGE_SENSOR_ORIENT_MAGN_NORTH,
  59         HID_USAGE_SENSOR_ORIENT_TRUE_NORTH,
  60 };
  61
  62 /* Channel definitions */
  63 static const struct iio_chan_spec magn_3d_channels[] = {
  64         {
  65                 .type = IIO_MAGN,
  66                 .modified = 1,
  67                 .channel2 = IIO_MOD_X,
  68                 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
  69                 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
  70                 BIT(IIO_CHAN_INFO_SCALE) |
  71                 BIT(IIO_CHAN_INFO_SAMP_FREQ) |
  72                 BIT(IIO_CHAN_INFO_HYSTERESIS),
  73         }, {
  74                 .type = IIO_MAGN,
  75                 .modified = 1,
  76                 .channel2 = IIO_MOD_Y,
  77                 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
  78                 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
  79                 BIT(IIO_CHAN_INFO_SCALE) |
  80                 BIT(IIO_CHAN_INFO_SAMP_FREQ) |
  81                 BIT(IIO_CHAN_INFO_HYSTERESIS),
  82         }, {
  83                 .type = IIO_MAGN,
  84                 .modified = 1,
  85                 .channel2 = IIO_MOD_Z,
  86                 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
  87                 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
  88                 BIT(IIO_CHAN_INFO_SCALE) |
  89                 BIT(IIO_CHAN_INFO_SAMP_FREQ) |
  90                 BIT(IIO_CHAN_INFO_HYSTERESIS),
  91         }, {
  92                 .type = IIO_ROT,
  93                 .modified = 1,
  94                 .channel2 = IIO_MOD_NORTH_MAGN_TILT_COMP,
  95                 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
  96                 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
  97                 BIT(IIO_CHAN_INFO_SCALE) |
  98                 BIT(IIO_CHAN_INFO_SAMP_FREQ) |
  99                 BIT(IIO_CHAN_INFO_HYSTERESIS),
 100         }, {
 101                 .type = IIO_ROT,
 102                 .modified = 1,
 103                 .channel2 = IIO_MOD_NORTH_TRUE_TILT_COMP,
 104                 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 105                 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
 106                 BIT(IIO_CHAN_INFO_SCALE) |
 107                 BIT(IIO_CHAN_INFO_SAMP_FREQ) |
 108                 BIT(IIO_CHAN_INFO_HYSTERESIS),
 109         }, {
 110                 .type = IIO_ROT,
 111                 .modified = 1,
 112                 .channel2 = IIO_MOD_NORTH_MAGN,
 113                 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 114                 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
 115                 BIT(IIO_CHAN_INFO_SCALE) |
 116                 BIT(IIO_CHAN_INFO_SAMP_FREQ) |
 117                 BIT(IIO_CHAN_INFO_HYSTERESIS),
 118         }, {
 119                 .type = IIO_ROT,
 120                 .modified = 1,
 121                 .channel2 = IIO_MOD_NORTH_TRUE,
 122                 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 123                 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
 124                 BIT(IIO_CHAN_INFO_SCALE) |
 125                 BIT(IIO_CHAN_INFO_SAMP_FREQ) |
 126                 BIT(IIO_CHAN_INFO_HYSTERESIS),
 127         }
 128 };
 129
 130 /* Adjust channel real bits based on report descriptor */
 131 static void magn_3d_adjust_channel_bit_mask(struct iio_chan_spec *channels,
 132                                                 int channel, int size)
 133 {
 134         channels[channel].scan_type.sign = 's';
 135         /* Real storage bits will change based on the report desc. */
 136         channels[channel].scan_type.realbits = size * 8;
 137         /* Maximum size of a sample to capture is u32 */
 138         channels[channel].scan_type.storagebits = sizeof(u32) * 8;
 139 }
 140
 141 /* Channel read_raw handler */
 142 static int magn_3d_read_raw(struct iio_dev *indio_dev,
 143                               struct iio_chan_spec const *chan,
 144                               int *val, int *val2,
 145                               long mask)
 146 {
 147         struct magn_3d_state *magn_state = iio_priv(indio_dev);
 148         int report_id = -1;
 149         u32 address;
 150         int ret_type;
 151         s32 min;
 152
 153         *val = 0;
 154         *val2 = 0;
 155         switch (mask) {
 156         case IIO_CHAN_INFO_RAW:
 157                 hid_sensor_power_state(&magn_state->magn_flux_attributes, true);
 158                 report_id = magn_state->magn[chan->address].report_id;
 159                 min = magn_state->magn[chan->address].logical_minimum;
 160                 address = magn_3d_addresses[chan->address];
 161                 if (report_id >= 0)
 162                         *val = sensor_hub_input_attr_get_raw_value(
 163                                 magn_state->magn_flux_attributes.hsdev,
 164                                 HID_USAGE_SENSOR_COMPASS_3D, address,
 165                                 report_id,
 166                                 SENSOR_HUB_SYNC,
 167                                 min < 0);
 168                 else {
 169                         *val = 0;
 170                         hid_sensor_power_state(
 171                                 &magn_state->magn_flux_attributes,
 172                                 false);
 173                         return -EINVAL;
 174                 }
 175                 hid_sensor_power_state(&magn_state->magn_flux_attributes,
 176                                         false);
 177                 ret_type = IIO_VAL_INT;
 178                 break;
 179         case IIO_CHAN_INFO_SCALE:
 180                 switch (chan->type) {
 181                 case IIO_MAGN:
 182                         *val = magn_state->magn_flux_attr.scale_pre_decml;
 183                         *val2 = magn_state->magn_flux_attr.scale_post_decml;
 184                         ret_type = magn_state->magn_flux_attr.scale_precision;
 185                         break;
 186                 case IIO_ROT:
 187                         *val = magn_state->rot_attr.scale_pre_decml;
 188                         *val2 = magn_state->rot_attr.scale_post_decml;
 189                         ret_type = magn_state->rot_attr.scale_precision;
 190                         break;
 191                 default:
 192                         ret_type = -EINVAL;
 193                 }
 194                 break;
 195         case IIO_CHAN_INFO_OFFSET:
 196                 switch (chan->type) {
 197                 case IIO_MAGN:
 198                         *val = magn_state->magn_flux_attr.value_offset;
 199                         ret_type = IIO_VAL_INT;
 200                         break;
 201                 case IIO_ROT:
 202                         *val = magn_state->rot_attr.value_offset;
 203                         ret_type = IIO_VAL_INT;
 204                         break;
 205                 default:
 206                         ret_type = -EINVAL;
 207                 }
 208                 break;
 209         case IIO_CHAN_INFO_SAMP_FREQ:
 210                 ret_type = hid_sensor_read_samp_freq_value(
 211                         &magn_state->magn_flux_attributes, val, val2);
 212                 break;
 213         case IIO_CHAN_INFO_HYSTERESIS:
 214                 switch (chan->type) {
 215                 case IIO_MAGN:
 216                         ret_type = hid_sensor_read_raw_hyst_value(
 217                                 &magn_state->magn_flux_attributes, val, val2);
 218                         break;
 219                 case IIO_ROT:
 220                         ret_type = hid_sensor_read_raw_hyst_value(
 221                                 &magn_state->rot_attributes, val, val2);
 222                         break;
 223                 default:
 224                         ret_type = -EINVAL;
 225                 }
 226                 break;
 227         default:
 228                 ret_type = -EINVAL;
 229                 break;
 230         }
 231
 232         return ret_type;
 233 }
 234
 235 /* Channel write_raw handler */
 236 static int magn_3d_write_raw(struct iio_dev *indio_dev,
 237                                struct iio_chan_spec const *chan,
 238                                int val,
 239                                int val2,
 240                                long mask)
 241 {
 242         struct magn_3d_state *magn_state = iio_priv(indio_dev);
 243         int ret = 0;
 244
 245         switch (mask) {
 246         case IIO_CHAN_INFO_SAMP_FREQ:
 247                 ret = hid_sensor_write_samp_freq_value(
 248                                 &magn_state->magn_flux_attributes, val, val2);
 249                 break;
 250         case IIO_CHAN_INFO_HYSTERESIS:
 251                 switch (chan->type) {
 252                 case IIO_MAGN:
 253                         ret = hid_sensor_write_raw_hyst_value(
 254                                 &magn_state->magn_flux_attributes, val, val2);
 255                         break;
 256                 case IIO_ROT:
 257                         ret = hid_sensor_write_raw_hyst_value(
 258                                 &magn_state->rot_attributes, val, val2);
 259                         break;
 260                 default:
 261                         ret = -EINVAL;
 262                 }
 263                 break;
 264         default:
 265                 ret = -EINVAL;
 266         }
 267
 268         return ret;
 269 }
 270
 271 static const struct iio_info magn_3d_info = {
 272         .read_raw = &magn_3d_read_raw,
 273         .write_raw = &magn_3d_write_raw,
 274 };
 275
 276 /* Function to push data to buffer */
 277 static void hid_sensor_push_data(struct iio_dev *indio_dev, const void *data)
 278 {
 279         dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n");
 280         iio_push_to_buffers(indio_dev, data);
 281 }
 282
 283 /* Callback handler to send event after all samples are received and captured */
 284 static int magn_3d_proc_event(struct hid_sensor_hub_device *hsdev,
 285                                 unsigned usage_id,
 286                                 void *priv)
 287 {
 288         struct iio_dev *indio_dev = platform_get_drvdata(priv);
 289         struct magn_3d_state *magn_state = iio_priv(indio_dev);
 290
 291         dev_dbg(&indio_dev->dev, "magn_3d_proc_event\n");
 292         if (atomic_read(&magn_state->magn_flux_attributes.data_ready))
 293                 hid_sensor_push_data(indio_dev, magn_state->iio_vals);
 294
 295         return 0;
 296 }
 297
 298 /* Capture samples in local storage */
 299 static int magn_3d_capture_sample(struct hid_sensor_hub_device *hsdev,
 300                                 unsigned usage_id,
 301                                 size_t raw_len, char *raw_data,
 302                                 void *priv)
 303 {
 304         struct iio_dev *indio_dev = platform_get_drvdata(priv);
 305         struct magn_3d_state *magn_state = iio_priv(indio_dev);
 306         int offset;
 307         int ret = 0;
 308         u32 *iio_val = NULL;
 309
 310         switch (usage_id) {
 311         case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS:
 312         case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Y_AXIS:
 313         case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Z_AXIS:
 314                 offset = (usage_id - HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS)
 315                                 + CHANNEL_SCAN_INDEX_X;
 316         break;
 317         case HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH:
 318         case HID_USAGE_SENSOR_ORIENT_COMP_TRUE_NORTH:
 319         case HID_USAGE_SENSOR_ORIENT_MAGN_NORTH:
 320         case HID_USAGE_SENSOR_ORIENT_TRUE_NORTH:
 321                 offset = (usage_id - HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH)
 322                                 + CHANNEL_SCAN_INDEX_NORTH_MAGN_TILT_COMP;
 323         break;
 324         default:
 325                 return -EINVAL;
 326         }
 327
 328         iio_val = magn_state->magn_val_addr[offset];
 329
 330         if (iio_val != NULL)
 331                 *iio_val = *((u32 *)raw_data);
 332         else
 333                 ret = -EINVAL;
 334
 335         return ret;
 336 }
 337
 338 /* Parse report which is specific to an usage id*/
 339 static int magn_3d_parse_report(struct platform_device *pdev,
 340                                 struct hid_sensor_hub_device *hsdev,
 341                                 struct iio_chan_spec **channels,
 342                                 int *chan_count,
 343                                 unsigned usage_id,
 344                                 struct magn_3d_state *st)
 345 {
 346         int i;
 347         int attr_count = 0;
 348         struct iio_chan_spec *_channels;
 349
 350         /* Scan for each usage attribute supported */
 351         for (i = 0; i < MAGN_3D_CHANNEL_MAX; i++) {
 352                 int status;
 353                 u32 address = magn_3d_addresses[i];
 354
 355                 /* Check if usage attribute exists in the sensor hub device */
 356                 status = sensor_hub_input_get_attribute_info(hsdev,
 357                         HID_INPUT_REPORT,
 358                         usage_id,
 359                         address,
 360                         &(st->magn[i]));
 361                 if (!status)
 362                         attr_count++;
 363         }
 364
 365         if (attr_count <= 0) {
 366                 dev_err(&pdev->dev,
 367                         "failed to find any supported usage attributes in report\n");
 368                 return  -EINVAL;
 369         }
 370
 371         dev_dbg(&pdev->dev, "magn_3d Found %d usage attributes\n",
 372                         attr_count);
 373         dev_dbg(&pdev->dev, "magn_3d X: %x:%x Y: %x:%x Z: %x:%x\n",
 374                         st->magn[0].index,
 375                         st->magn[0].report_id,
 376                         st->magn[1].index, st->magn[1].report_id,
 377                         st->magn[2].index, st->magn[2].report_id);
 378
 379         /* Setup IIO channel array */
 380         _channels = devm_kcalloc(&pdev->dev, attr_count,
 381                                 sizeof(struct iio_chan_spec),
 382                                 GFP_KERNEL);
 383         if (!_channels) {
 384                 dev_err(&pdev->dev,
 385                         "failed to allocate space for iio channels\n");
 386                 return -ENOMEM;
 387         }
 388
 389         st->iio_vals = devm_kcalloc(&pdev->dev, attr_count,
 390                                 sizeof(u32),
 391                                 GFP_KERNEL);
 392         if (!st->iio_vals) {
 393                 dev_err(&pdev->dev,
 394                         "failed to allocate space for iio values array\n");
 395                 return -ENOMEM;
 396         }
 397
 398         for (i = 0, *chan_count = 0;
 399         i < MAGN_3D_CHANNEL_MAX && *chan_count < attr_count;
 400         i++){
 401                 if (st->magn[i].index >= 0) {
 402                         /* Setup IIO channel struct */
 403                         (_channels[*chan_count]) = magn_3d_channels[i];
 404                         (_channels[*chan_count]).scan_index = *chan_count;
 405                         (_channels[*chan_count]).address = i;
 406
 407                         /* Set magn_val_addr to iio value address */
 408                         st->magn_val_addr[i] = &(st->iio_vals[*chan_count]);
 409                         magn_3d_adjust_channel_bit_mask(_channels,
 410                                                         *chan_count,
 411                                                         st->magn[i].size);
 412                         (*chan_count)++;
 413                 }
 414         }
 415
 416         if (*chan_count <= 0) {
 417                 dev_err(&pdev->dev,
 418                         "failed to find any magnetic channels setup\n");
 419                 return -EINVAL;
 420         }
 421
 422         *channels = _channels;
 423
 424         dev_dbg(&pdev->dev, "magn_3d Setup %d IIO channels\n",
 425                         *chan_count);
 426
 427         st->magn_flux_attr.scale_precision = hid_sensor_format_scale(
 428                                 HID_USAGE_SENSOR_COMPASS_3D,
 429                                 &st->magn[CHANNEL_SCAN_INDEX_X],
 430                                 &st->magn_flux_attr.scale_pre_decml,
 431                                 &st->magn_flux_attr.scale_post_decml);
 432         st->rot_attr.scale_precision
 433                 = hid_sensor_format_scale(
 434                         HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH,
 435                         &st->magn[CHANNEL_SCAN_INDEX_NORTH_MAGN_TILT_COMP],
 436                         &st->rot_attr.scale_pre_decml,
 437                         &st->rot_attr.scale_post_decml);
 438
 439         /* Set Sensitivity field ids, when there is no individual modifier */
 440         if (st->magn_flux_attributes.sensitivity.index < 0) {
 441                 sensor_hub_input_get_attribute_info(hsdev,
 442                         HID_FEATURE_REPORT, usage_id,
 443                         HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS |
 444                         HID_USAGE_SENSOR_DATA_ORIENTATION,
 445                         &st->magn_flux_attributes.sensitivity);
 446                 dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n",
 447                         st->magn_flux_attributes.sensitivity.index,
 448                         st->magn_flux_attributes.sensitivity.report_id);
 449         }
 450         if (st->magn_flux_attributes.sensitivity.index < 0) {
 451                 sensor_hub_input_get_attribute_info(hsdev,
 452                         HID_FEATURE_REPORT, usage_id,
 453                         HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS |
 454                         HID_USAGE_SENSOR_ORIENT_MAGN_FLUX,
 455                         &st->magn_flux_attributes.sensitivity);
 456                 dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n",
 457                         st->magn_flux_attributes.sensitivity.index,
 458                         st->magn_flux_attributes.sensitivity.report_id);
 459         }
 460         if (st->rot_attributes.sensitivity.index < 0) {
 461                 sensor_hub_input_get_attribute_info(hsdev,
 462                         HID_FEATURE_REPORT, usage_id,
 463                         HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS |
 464                         HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH,
 465                         &st->rot_attributes.sensitivity);
 466                 dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n",
 467                         st->rot_attributes.sensitivity.index,
 468                         st->rot_attributes.sensitivity.report_id);
 469         }
 470
 471         return 0;
 472 }
 473
 474 /* Function to initialize the processing for usage id */
 475 static int hid_magn_3d_probe(struct platform_device *pdev)
 476 {
 477         int ret = 0;
 478         static char *name = "magn_3d";
 479         struct iio_dev *indio_dev;
 480         struct magn_3d_state *magn_state;
 481         struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
 482         struct iio_chan_spec *channels;
 483         int chan_count = 0;
 484
 485         indio_dev = devm_iio_device_alloc(&pdev->dev,
 486                                           sizeof(struct magn_3d_state));
 487         if (indio_dev == NULL)
 488                 return -ENOMEM;
 489
 490         platform_set_drvdata(pdev, indio_dev);
 491
 492         magn_state = iio_priv(indio_dev);
 493         magn_state->magn_flux_attributes.hsdev = hsdev;
 494         magn_state->magn_flux_attributes.pdev = pdev;
 495
 496         ret = hid_sensor_parse_common_attributes(hsdev,
 497                                 HID_USAGE_SENSOR_COMPASS_3D,
 498                                 &magn_state->magn_flux_attributes);
 499         if (ret) {
 500                 dev_err(&pdev->dev, "failed to setup common attributes\n");
 501                 return ret;
 502         }
 503         magn_state->rot_attributes = magn_state->magn_flux_attributes;
 504
 505         ret = magn_3d_parse_report(pdev, hsdev,
 506                                 &channels, &chan_count,
 507                                 HID_USAGE_SENSOR_COMPASS_3D, magn_state);
 508         if (ret) {
 509                 dev_err(&pdev->dev, "failed to parse report\n");
 510                 return ret;
 511         }
 512
 513         indio_dev->channels = channels;
 514         indio_dev->num_channels = chan_count;
 515         indio_dev->info = &magn_3d_info;
 516         indio_dev->name = name;
 517         indio_dev->modes = INDIO_DIRECT_MODE;
 518
 519         atomic_set(&magn_state->magn_flux_attributes.data_ready, 0);
 520
 521         ret = hid_sensor_setup_trigger(indio_dev, name,
 522                                         &magn_state->magn_flux_attributes);
 523         if (ret < 0) {
 524                 dev_err(&pdev->dev, "trigger setup failed\n");
 525                 return ret;
 526         }
 527
 528         ret = iio_device_register(indio_dev);
 529         if (ret) {
 530                 dev_err(&pdev->dev, "device register failed\n");
 531                 goto error_remove_trigger;
 532         }
 533
 534         magn_state->callbacks.send_event = magn_3d_proc_event;
 535         magn_state->callbacks.capture_sample = magn_3d_capture_sample;
 536         magn_state->callbacks.pdev = pdev;
 537         ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_COMPASS_3D,
 538                                         &magn_state->callbacks);
 539         if (ret < 0) {
 540                 dev_err(&pdev->dev, "callback reg failed\n");
 541                 goto error_iio_unreg;
 542         }
 543
 544         return ret;
 545
 546 error_iio_unreg:
 547         iio_device_unregister(indio_dev);
 548 error_remove_trigger:
 549         hid_sensor_remove_trigger(indio_dev, &magn_state->magn_flux_attributes);
 550         return ret;
 551 }
 552
 553 /* Function to deinitialize the processing for usage id */
 554 static int hid_magn_3d_remove(struct platform_device *pdev)
 555 {
 556         struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
 557         struct iio_dev *indio_dev = platform_get_drvdata(pdev);
 558         struct magn_3d_state *magn_state = iio_priv(indio_dev);
 559
 560         sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_COMPASS_3D);
 561         iio_device_unregister(indio_dev);
 562         hid_sensor_remove_trigger(indio_dev, &magn_state->magn_flux_attributes);
 563
 564         return 0;
 565 }
 566
 567 static const struct platform_device_id hid_magn_3d_ids[] = {
 568         {
 569                 /* Format: HID-SENSOR-usage_id_in_hex_lowercase */
 570                 .name = "HID-SENSOR-200083",
 571         },
 572         { /* sentinel */ }
 573 };
 574 MODULE_DEVICE_TABLE(platform, hid_magn_3d_ids);
 575
 576 static struct platform_driver hid_magn_3d_platform_driver = {
 577         .id_table = hid_magn_3d_ids,
 578         .driver = {
 579                 .name   = KBUILD_MODNAME,
 580                 .pm     = &hid_sensor_pm_ops,
 581         },
 582         .probe          = hid_magn_3d_probe,
 583         .remove         = hid_magn_3d_remove,
 584 };
 585 module_platform_driver(hid_magn_3d_platform_driver);
 586
 587 MODULE_DESCRIPTION("HID Sensor Magnetometer 3D");
 588 MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@intel.com>");
 589 MODULE_LICENSE("GPL");