Merge tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block
[linux/fpc-iii.git] / drivers / input / rmi4 / rmi_driver.c
blob258d5fe3d395c4670088aa0d736cac69c7d24550
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright (c) 2011-2016 Synaptics Incorporated
4 * Copyright (c) 2011 Unixphere
6 * This driver provides the core support for a single RMI4-based device.
8 * The RMI4 specification can be found here (URL split for line length):
10 * http://www.synaptics.com/sites/default/files/
11 * 511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf
14 #include <linux/bitmap.h>
15 #include <linux/delay.h>
16 #include <linux/fs.h>
17 #include <linux/irq.h>
18 #include <linux/pm.h>
19 #include <linux/slab.h>
20 #include <linux/of.h>
21 #include <linux/irqdomain.h>
22 #include <uapi/linux/input.h>
23 #include <linux/rmi.h>
24 #include "rmi_bus.h"
25 #include "rmi_driver.h"
27 #define HAS_NONSTANDARD_PDT_MASK 0x40
28 #define RMI4_MAX_PAGE 0xff
29 #define RMI4_PAGE_SIZE 0x100
30 #define RMI4_PAGE_MASK 0xFF00
32 #define RMI_DEVICE_RESET_CMD 0x01
33 #define DEFAULT_RESET_DELAY_MS 100
35 void rmi_free_function_list(struct rmi_device *rmi_dev)
37 struct rmi_function *fn, *tmp;
38 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
40 rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev, "Freeing function list\n");
42 /* Doing it in the reverse order so F01 will be removed last */
43 list_for_each_entry_safe_reverse(fn, tmp,
44 &data->function_list, node) {
45 list_del(&fn->node);
46 rmi_unregister_function(fn);
49 devm_kfree(&rmi_dev->dev, data->irq_memory);
50 data->irq_memory = NULL;
51 data->irq_status = NULL;
52 data->fn_irq_bits = NULL;
53 data->current_irq_mask = NULL;
54 data->new_irq_mask = NULL;
56 data->f01_container = NULL;
57 data->f34_container = NULL;
60 static int reset_one_function(struct rmi_function *fn)
62 struct rmi_function_handler *fh;
63 int retval = 0;
65 if (!fn || !fn->dev.driver)
66 return 0;
68 fh = to_rmi_function_handler(fn->dev.driver);
69 if (fh->reset) {
70 retval = fh->reset(fn);
71 if (retval < 0)
72 dev_err(&fn->dev, "Reset failed with code %d.\n",
73 retval);
76 return retval;
79 static int configure_one_function(struct rmi_function *fn)
81 struct rmi_function_handler *fh;
82 int retval = 0;
84 if (!fn || !fn->dev.driver)
85 return 0;
87 fh = to_rmi_function_handler(fn->dev.driver);
88 if (fh->config) {
89 retval = fh->config(fn);
90 if (retval < 0)
91 dev_err(&fn->dev, "Config failed with code %d.\n",
92 retval);
95 return retval;
98 static int rmi_driver_process_reset_requests(struct rmi_device *rmi_dev)
100 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
101 struct rmi_function *entry;
102 int retval;
104 list_for_each_entry(entry, &data->function_list, node) {
105 retval = reset_one_function(entry);
106 if (retval < 0)
107 return retval;
110 return 0;
113 static int rmi_driver_process_config_requests(struct rmi_device *rmi_dev)
115 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
116 struct rmi_function *entry;
117 int retval;
119 list_for_each_entry(entry, &data->function_list, node) {
120 retval = configure_one_function(entry);
121 if (retval < 0)
122 return retval;
125 return 0;
128 static int rmi_process_interrupt_requests(struct rmi_device *rmi_dev)
130 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
131 struct device *dev = &rmi_dev->dev;
132 int i;
133 int error;
135 if (!data)
136 return 0;
138 if (!data->attn_data.data) {
139 error = rmi_read_block(rmi_dev,
140 data->f01_container->fd.data_base_addr + 1,
141 data->irq_status, data->num_of_irq_regs);
142 if (error < 0) {
143 dev_err(dev, "Failed to read irqs, code=%d\n", error);
144 return error;
148 mutex_lock(&data->irq_mutex);
149 bitmap_and(data->irq_status, data->irq_status, data->fn_irq_bits,
150 data->irq_count);
152 * At this point, irq_status has all bits that are set in the
153 * interrupt status register and are enabled.
155 mutex_unlock(&data->irq_mutex);
157 for_each_set_bit(i, data->irq_status, data->irq_count)
158 handle_nested_irq(irq_find_mapping(data->irqdomain, i));
160 if (data->input)
161 input_sync(data->input);
163 return 0;
166 void rmi_set_attn_data(struct rmi_device *rmi_dev, unsigned long irq_status,
167 void *data, size_t size)
169 struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
170 struct rmi4_attn_data attn_data;
171 void *fifo_data;
173 if (!drvdata->enabled)
174 return;
176 fifo_data = kmemdup(data, size, GFP_ATOMIC);
177 if (!fifo_data)
178 return;
180 attn_data.irq_status = irq_status;
181 attn_data.size = size;
182 attn_data.data = fifo_data;
184 kfifo_put(&drvdata->attn_fifo, attn_data);
186 EXPORT_SYMBOL_GPL(rmi_set_attn_data);
188 static irqreturn_t rmi_irq_fn(int irq, void *dev_id)
190 struct rmi_device *rmi_dev = dev_id;
191 struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
192 struct rmi4_attn_data attn_data = {0};
193 int ret, count;
195 count = kfifo_get(&drvdata->attn_fifo, &attn_data);
196 if (count) {
197 *(drvdata->irq_status) = attn_data.irq_status;
198 drvdata->attn_data = attn_data;
201 ret = rmi_process_interrupt_requests(rmi_dev);
202 if (ret)
203 rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev,
204 "Failed to process interrupt request: %d\n", ret);
206 if (count) {
207 kfree(attn_data.data);
208 drvdata->attn_data.data = NULL;
211 if (!kfifo_is_empty(&drvdata->attn_fifo))
212 return rmi_irq_fn(irq, dev_id);
214 return IRQ_HANDLED;
217 static int rmi_irq_init(struct rmi_device *rmi_dev)
219 struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
220 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
221 int irq_flags = irq_get_trigger_type(pdata->irq);
222 int ret;
224 if (!irq_flags)
225 irq_flags = IRQF_TRIGGER_LOW;
227 ret = devm_request_threaded_irq(&rmi_dev->dev, pdata->irq, NULL,
228 rmi_irq_fn, irq_flags | IRQF_ONESHOT,
229 dev_driver_string(rmi_dev->xport->dev),
230 rmi_dev);
231 if (ret < 0) {
232 dev_err(&rmi_dev->dev, "Failed to register interrupt %d\n",
233 pdata->irq);
235 return ret;
238 data->enabled = true;
240 return 0;
243 struct rmi_function *rmi_find_function(struct rmi_device *rmi_dev, u8 number)
245 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
246 struct rmi_function *entry;
248 list_for_each_entry(entry, &data->function_list, node) {
249 if (entry->fd.function_number == number)
250 return entry;
253 return NULL;
256 static int suspend_one_function(struct rmi_function *fn)
258 struct rmi_function_handler *fh;
259 int retval = 0;
261 if (!fn || !fn->dev.driver)
262 return 0;
264 fh = to_rmi_function_handler(fn->dev.driver);
265 if (fh->suspend) {
266 retval = fh->suspend(fn);
267 if (retval < 0)
268 dev_err(&fn->dev, "Suspend failed with code %d.\n",
269 retval);
272 return retval;
275 static int rmi_suspend_functions(struct rmi_device *rmi_dev)
277 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
278 struct rmi_function *entry;
279 int retval;
281 list_for_each_entry(entry, &data->function_list, node) {
282 retval = suspend_one_function(entry);
283 if (retval < 0)
284 return retval;
287 return 0;
290 static int resume_one_function(struct rmi_function *fn)
292 struct rmi_function_handler *fh;
293 int retval = 0;
295 if (!fn || !fn->dev.driver)
296 return 0;
298 fh = to_rmi_function_handler(fn->dev.driver);
299 if (fh->resume) {
300 retval = fh->resume(fn);
301 if (retval < 0)
302 dev_err(&fn->dev, "Resume failed with code %d.\n",
303 retval);
306 return retval;
309 static int rmi_resume_functions(struct rmi_device *rmi_dev)
311 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
312 struct rmi_function *entry;
313 int retval;
315 list_for_each_entry(entry, &data->function_list, node) {
316 retval = resume_one_function(entry);
317 if (retval < 0)
318 return retval;
321 return 0;
324 int rmi_enable_sensor(struct rmi_device *rmi_dev)
326 int retval = 0;
328 retval = rmi_driver_process_config_requests(rmi_dev);
329 if (retval < 0)
330 return retval;
332 return rmi_process_interrupt_requests(rmi_dev);
336 * rmi_driver_set_input_params - set input device id and other data.
338 * @rmi_dev: Pointer to an RMI device
339 * @input: Pointer to input device
342 static int rmi_driver_set_input_params(struct rmi_device *rmi_dev,
343 struct input_dev *input)
345 input->name = SYNAPTICS_INPUT_DEVICE_NAME;
346 input->id.vendor = SYNAPTICS_VENDOR_ID;
347 input->id.bustype = BUS_RMI;
348 return 0;
351 static void rmi_driver_set_input_name(struct rmi_device *rmi_dev,
352 struct input_dev *input)
354 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
355 const char *device_name = rmi_f01_get_product_ID(data->f01_container);
356 char *name;
358 name = devm_kasprintf(&rmi_dev->dev, GFP_KERNEL,
359 "Synaptics %s", device_name);
360 if (!name)
361 return;
363 input->name = name;
366 static int rmi_driver_set_irq_bits(struct rmi_device *rmi_dev,
367 unsigned long *mask)
369 int error = 0;
370 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
371 struct device *dev = &rmi_dev->dev;
373 mutex_lock(&data->irq_mutex);
374 bitmap_or(data->new_irq_mask,
375 data->current_irq_mask, mask, data->irq_count);
377 error = rmi_write_block(rmi_dev,
378 data->f01_container->fd.control_base_addr + 1,
379 data->new_irq_mask, data->num_of_irq_regs);
380 if (error < 0) {
381 dev_err(dev, "%s: Failed to change enabled interrupts!",
382 __func__);
383 goto error_unlock;
385 bitmap_copy(data->current_irq_mask, data->new_irq_mask,
386 data->num_of_irq_regs);
388 bitmap_or(data->fn_irq_bits, data->fn_irq_bits, mask, data->irq_count);
390 error_unlock:
391 mutex_unlock(&data->irq_mutex);
392 return error;
395 static int rmi_driver_clear_irq_bits(struct rmi_device *rmi_dev,
396 unsigned long *mask)
398 int error = 0;
399 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
400 struct device *dev = &rmi_dev->dev;
402 mutex_lock(&data->irq_mutex);
403 bitmap_andnot(data->fn_irq_bits,
404 data->fn_irq_bits, mask, data->irq_count);
405 bitmap_andnot(data->new_irq_mask,
406 data->current_irq_mask, mask, data->irq_count);
408 error = rmi_write_block(rmi_dev,
409 data->f01_container->fd.control_base_addr + 1,
410 data->new_irq_mask, data->num_of_irq_regs);
411 if (error < 0) {
412 dev_err(dev, "%s: Failed to change enabled interrupts!",
413 __func__);
414 goto error_unlock;
416 bitmap_copy(data->current_irq_mask, data->new_irq_mask,
417 data->num_of_irq_regs);
419 error_unlock:
420 mutex_unlock(&data->irq_mutex);
421 return error;
424 static int rmi_driver_reset_handler(struct rmi_device *rmi_dev)
426 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
427 int error;
430 * Can get called before the driver is fully ready to deal with
431 * this situation.
433 if (!data || !data->f01_container) {
434 dev_warn(&rmi_dev->dev,
435 "Not ready to handle reset yet!\n");
436 return 0;
439 error = rmi_read_block(rmi_dev,
440 data->f01_container->fd.control_base_addr + 1,
441 data->current_irq_mask, data->num_of_irq_regs);
442 if (error < 0) {
443 dev_err(&rmi_dev->dev, "%s: Failed to read current IRQ mask.\n",
444 __func__);
445 return error;
448 error = rmi_driver_process_reset_requests(rmi_dev);
449 if (error < 0)
450 return error;
452 error = rmi_driver_process_config_requests(rmi_dev);
453 if (error < 0)
454 return error;
456 return 0;
459 static int rmi_read_pdt_entry(struct rmi_device *rmi_dev,
460 struct pdt_entry *entry, u16 pdt_address)
462 u8 buf[RMI_PDT_ENTRY_SIZE];
463 int error;
465 error = rmi_read_block(rmi_dev, pdt_address, buf, RMI_PDT_ENTRY_SIZE);
466 if (error) {
467 dev_err(&rmi_dev->dev, "Read PDT entry at %#06x failed, code: %d.\n",
468 pdt_address, error);
469 return error;
472 entry->page_start = pdt_address & RMI4_PAGE_MASK;
473 entry->query_base_addr = buf[0];
474 entry->command_base_addr = buf[1];
475 entry->control_base_addr = buf[2];
476 entry->data_base_addr = buf[3];
477 entry->interrupt_source_count = buf[4] & RMI_PDT_INT_SOURCE_COUNT_MASK;
478 entry->function_version = (buf[4] & RMI_PDT_FUNCTION_VERSION_MASK) >> 5;
479 entry->function_number = buf[5];
481 return 0;
484 static void rmi_driver_copy_pdt_to_fd(const struct pdt_entry *pdt,
485 struct rmi_function_descriptor *fd)
487 fd->query_base_addr = pdt->query_base_addr + pdt->page_start;
488 fd->command_base_addr = pdt->command_base_addr + pdt->page_start;
489 fd->control_base_addr = pdt->control_base_addr + pdt->page_start;
490 fd->data_base_addr = pdt->data_base_addr + pdt->page_start;
491 fd->function_number = pdt->function_number;
492 fd->interrupt_source_count = pdt->interrupt_source_count;
493 fd->function_version = pdt->function_version;
496 #define RMI_SCAN_CONTINUE 0
497 #define RMI_SCAN_DONE 1
499 static int rmi_scan_pdt_page(struct rmi_device *rmi_dev,
500 int page,
501 int *empty_pages,
502 void *ctx,
503 int (*callback)(struct rmi_device *rmi_dev,
504 void *ctx,
505 const struct pdt_entry *entry))
507 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
508 struct pdt_entry pdt_entry;
509 u16 page_start = RMI4_PAGE_SIZE * page;
510 u16 pdt_start = page_start + PDT_START_SCAN_LOCATION;
511 u16 pdt_end = page_start + PDT_END_SCAN_LOCATION;
512 u16 addr;
513 int error;
514 int retval;
516 for (addr = pdt_start; addr >= pdt_end; addr -= RMI_PDT_ENTRY_SIZE) {
517 error = rmi_read_pdt_entry(rmi_dev, &pdt_entry, addr);
518 if (error)
519 return error;
521 if (RMI4_END_OF_PDT(pdt_entry.function_number))
522 break;
524 retval = callback(rmi_dev, ctx, &pdt_entry);
525 if (retval != RMI_SCAN_CONTINUE)
526 return retval;
530 * Count number of empty PDT pages. If a gap of two pages
531 * or more is found, stop scanning.
533 if (addr == pdt_start)
534 ++*empty_pages;
535 else
536 *empty_pages = 0;
538 return (data->bootloader_mode || *empty_pages >= 2) ?
539 RMI_SCAN_DONE : RMI_SCAN_CONTINUE;
542 int rmi_scan_pdt(struct rmi_device *rmi_dev, void *ctx,
543 int (*callback)(struct rmi_device *rmi_dev,
544 void *ctx, const struct pdt_entry *entry))
546 int page;
547 int empty_pages = 0;
548 int retval = RMI_SCAN_DONE;
550 for (page = 0; page <= RMI4_MAX_PAGE; page++) {
551 retval = rmi_scan_pdt_page(rmi_dev, page, &empty_pages,
552 ctx, callback);
553 if (retval != RMI_SCAN_CONTINUE)
554 break;
557 return retval < 0 ? retval : 0;
560 int rmi_read_register_desc(struct rmi_device *d, u16 addr,
561 struct rmi_register_descriptor *rdesc)
563 int ret;
564 u8 size_presence_reg;
565 u8 buf[35];
566 int presense_offset = 1;
567 u8 *struct_buf;
568 int reg;
569 int offset = 0;
570 int map_offset = 0;
571 int i;
572 int b;
575 * The first register of the register descriptor is the size of
576 * the register descriptor's presense register.
578 ret = rmi_read(d, addr, &size_presence_reg);
579 if (ret)
580 return ret;
581 ++addr;
583 if (size_presence_reg < 0 || size_presence_reg > 35)
584 return -EIO;
586 memset(buf, 0, sizeof(buf));
589 * The presence register contains the size of the register structure
590 * and a bitmap which identified which packet registers are present
591 * for this particular register type (ie query, control, or data).
593 ret = rmi_read_block(d, addr, buf, size_presence_reg);
594 if (ret)
595 return ret;
596 ++addr;
598 if (buf[0] == 0) {
599 presense_offset = 3;
600 rdesc->struct_size = buf[1] | (buf[2] << 8);
601 } else {
602 rdesc->struct_size = buf[0];
605 for (i = presense_offset; i < size_presence_reg; i++) {
606 for (b = 0; b < 8; b++) {
607 if (buf[i] & (0x1 << b))
608 bitmap_set(rdesc->presense_map, map_offset, 1);
609 ++map_offset;
613 rdesc->num_registers = bitmap_weight(rdesc->presense_map,
614 RMI_REG_DESC_PRESENSE_BITS);
616 rdesc->registers = devm_kcalloc(&d->dev,
617 rdesc->num_registers,
618 sizeof(struct rmi_register_desc_item),
619 GFP_KERNEL);
620 if (!rdesc->registers)
621 return -ENOMEM;
624 * Allocate a temporary buffer to hold the register structure.
625 * I'm not using devm_kzalloc here since it will not be retained
626 * after exiting this function
628 struct_buf = kzalloc(rdesc->struct_size, GFP_KERNEL);
629 if (!struct_buf)
630 return -ENOMEM;
633 * The register structure contains information about every packet
634 * register of this type. This includes the size of the packet
635 * register and a bitmap of all subpackets contained in the packet
636 * register.
638 ret = rmi_read_block(d, addr, struct_buf, rdesc->struct_size);
639 if (ret)
640 goto free_struct_buff;
642 reg = find_first_bit(rdesc->presense_map, RMI_REG_DESC_PRESENSE_BITS);
643 for (i = 0; i < rdesc->num_registers; i++) {
644 struct rmi_register_desc_item *item = &rdesc->registers[i];
645 int reg_size = struct_buf[offset];
647 ++offset;
648 if (reg_size == 0) {
649 reg_size = struct_buf[offset] |
650 (struct_buf[offset + 1] << 8);
651 offset += 2;
654 if (reg_size == 0) {
655 reg_size = struct_buf[offset] |
656 (struct_buf[offset + 1] << 8) |
657 (struct_buf[offset + 2] << 16) |
658 (struct_buf[offset + 3] << 24);
659 offset += 4;
662 item->reg = reg;
663 item->reg_size = reg_size;
665 map_offset = 0;
667 do {
668 for (b = 0; b < 7; b++) {
669 if (struct_buf[offset] & (0x1 << b))
670 bitmap_set(item->subpacket_map,
671 map_offset, 1);
672 ++map_offset;
674 } while (struct_buf[offset++] & 0x80);
676 item->num_subpackets = bitmap_weight(item->subpacket_map,
677 RMI_REG_DESC_SUBPACKET_BITS);
679 rmi_dbg(RMI_DEBUG_CORE, &d->dev,
680 "%s: reg: %d reg size: %ld subpackets: %d\n", __func__,
681 item->reg, item->reg_size, item->num_subpackets);
683 reg = find_next_bit(rdesc->presense_map,
684 RMI_REG_DESC_PRESENSE_BITS, reg + 1);
687 free_struct_buff:
688 kfree(struct_buf);
689 return ret;
692 const struct rmi_register_desc_item *rmi_get_register_desc_item(
693 struct rmi_register_descriptor *rdesc, u16 reg)
695 const struct rmi_register_desc_item *item;
696 int i;
698 for (i = 0; i < rdesc->num_registers; i++) {
699 item = &rdesc->registers[i];
700 if (item->reg == reg)
701 return item;
704 return NULL;
707 size_t rmi_register_desc_calc_size(struct rmi_register_descriptor *rdesc)
709 const struct rmi_register_desc_item *item;
710 int i;
711 size_t size = 0;
713 for (i = 0; i < rdesc->num_registers; i++) {
714 item = &rdesc->registers[i];
715 size += item->reg_size;
717 return size;
720 /* Compute the register offset relative to the base address */
721 int rmi_register_desc_calc_reg_offset(
722 struct rmi_register_descriptor *rdesc, u16 reg)
724 const struct rmi_register_desc_item *item;
725 int offset = 0;
726 int i;
728 for (i = 0; i < rdesc->num_registers; i++) {
729 item = &rdesc->registers[i];
730 if (item->reg == reg)
731 return offset;
732 ++offset;
734 return -1;
737 bool rmi_register_desc_has_subpacket(const struct rmi_register_desc_item *item,
738 u8 subpacket)
740 return find_next_bit(item->subpacket_map, RMI_REG_DESC_PRESENSE_BITS,
741 subpacket) == subpacket;
744 static int rmi_check_bootloader_mode(struct rmi_device *rmi_dev,
745 const struct pdt_entry *pdt)
747 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
748 int ret;
749 u8 status;
751 if (pdt->function_number == 0x34 && pdt->function_version > 1) {
752 ret = rmi_read(rmi_dev, pdt->data_base_addr, &status);
753 if (ret) {
754 dev_err(&rmi_dev->dev,
755 "Failed to read F34 status: %d.\n", ret);
756 return ret;
759 if (status & BIT(7))
760 data->bootloader_mode = true;
761 } else if (pdt->function_number == 0x01) {
762 ret = rmi_read(rmi_dev, pdt->data_base_addr, &status);
763 if (ret) {
764 dev_err(&rmi_dev->dev,
765 "Failed to read F01 status: %d.\n", ret);
766 return ret;
769 if (status & BIT(6))
770 data->bootloader_mode = true;
773 return 0;
776 static int rmi_count_irqs(struct rmi_device *rmi_dev,
777 void *ctx, const struct pdt_entry *pdt)
779 int *irq_count = ctx;
780 int ret;
782 *irq_count += pdt->interrupt_source_count;
784 ret = rmi_check_bootloader_mode(rmi_dev, pdt);
785 if (ret < 0)
786 return ret;
788 return RMI_SCAN_CONTINUE;
791 int rmi_initial_reset(struct rmi_device *rmi_dev, void *ctx,
792 const struct pdt_entry *pdt)
794 int error;
796 if (pdt->function_number == 0x01) {
797 u16 cmd_addr = pdt->page_start + pdt->command_base_addr;
798 u8 cmd_buf = RMI_DEVICE_RESET_CMD;
799 const struct rmi_device_platform_data *pdata =
800 rmi_get_platform_data(rmi_dev);
802 if (rmi_dev->xport->ops->reset) {
803 error = rmi_dev->xport->ops->reset(rmi_dev->xport,
804 cmd_addr);
805 if (error)
806 return error;
808 return RMI_SCAN_DONE;
811 rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev, "Sending reset\n");
812 error = rmi_write_block(rmi_dev, cmd_addr, &cmd_buf, 1);
813 if (error) {
814 dev_err(&rmi_dev->dev,
815 "Initial reset failed. Code = %d.\n", error);
816 return error;
819 mdelay(pdata->reset_delay_ms ?: DEFAULT_RESET_DELAY_MS);
821 return RMI_SCAN_DONE;
824 /* F01 should always be on page 0. If we don't find it there, fail. */
825 return pdt->page_start == 0 ? RMI_SCAN_CONTINUE : -ENODEV;
828 static int rmi_create_function(struct rmi_device *rmi_dev,
829 void *ctx, const struct pdt_entry *pdt)
831 struct device *dev = &rmi_dev->dev;
832 struct rmi_driver_data *data = dev_get_drvdata(dev);
833 int *current_irq_count = ctx;
834 struct rmi_function *fn;
835 int i;
836 int error;
838 rmi_dbg(RMI_DEBUG_CORE, dev, "Initializing F%02X.\n",
839 pdt->function_number);
841 fn = kzalloc(sizeof(struct rmi_function) +
842 BITS_TO_LONGS(data->irq_count) * sizeof(unsigned long),
843 GFP_KERNEL);
844 if (!fn) {
845 dev_err(dev, "Failed to allocate memory for F%02X\n",
846 pdt->function_number);
847 return -ENOMEM;
850 INIT_LIST_HEAD(&fn->node);
851 rmi_driver_copy_pdt_to_fd(pdt, &fn->fd);
853 fn->rmi_dev = rmi_dev;
855 fn->num_of_irqs = pdt->interrupt_source_count;
856 fn->irq_pos = *current_irq_count;
857 *current_irq_count += fn->num_of_irqs;
859 for (i = 0; i < fn->num_of_irqs; i++)
860 set_bit(fn->irq_pos + i, fn->irq_mask);
862 error = rmi_register_function(fn);
863 if (error)
864 return error;
866 if (pdt->function_number == 0x01)
867 data->f01_container = fn;
868 else if (pdt->function_number == 0x34)
869 data->f34_container = fn;
871 list_add_tail(&fn->node, &data->function_list);
873 return RMI_SCAN_CONTINUE;
876 void rmi_enable_irq(struct rmi_device *rmi_dev, bool clear_wake)
878 struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
879 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
880 int irq = pdata->irq;
881 int irq_flags;
882 int retval;
884 mutex_lock(&data->enabled_mutex);
886 if (data->enabled)
887 goto out;
889 enable_irq(irq);
890 data->enabled = true;
891 if (clear_wake && device_may_wakeup(rmi_dev->xport->dev)) {
892 retval = disable_irq_wake(irq);
893 if (retval)
894 dev_warn(&rmi_dev->dev,
895 "Failed to disable irq for wake: %d\n",
896 retval);
900 * Call rmi_process_interrupt_requests() after enabling irq,
901 * otherwise we may lose interrupt on edge-triggered systems.
903 irq_flags = irq_get_trigger_type(pdata->irq);
904 if (irq_flags & IRQ_TYPE_EDGE_BOTH)
905 rmi_process_interrupt_requests(rmi_dev);
907 out:
908 mutex_unlock(&data->enabled_mutex);
911 void rmi_disable_irq(struct rmi_device *rmi_dev, bool enable_wake)
913 struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
914 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
915 struct rmi4_attn_data attn_data = {0};
916 int irq = pdata->irq;
917 int retval, count;
919 mutex_lock(&data->enabled_mutex);
921 if (!data->enabled)
922 goto out;
924 data->enabled = false;
925 disable_irq(irq);
926 if (enable_wake && device_may_wakeup(rmi_dev->xport->dev)) {
927 retval = enable_irq_wake(irq);
928 if (retval)
929 dev_warn(&rmi_dev->dev,
930 "Failed to enable irq for wake: %d\n",
931 retval);
934 /* make sure the fifo is clean */
935 while (!kfifo_is_empty(&data->attn_fifo)) {
936 count = kfifo_get(&data->attn_fifo, &attn_data);
937 if (count)
938 kfree(attn_data.data);
941 out:
942 mutex_unlock(&data->enabled_mutex);
945 int rmi_driver_suspend(struct rmi_device *rmi_dev, bool enable_wake)
947 int retval;
949 retval = rmi_suspend_functions(rmi_dev);
950 if (retval)
951 dev_warn(&rmi_dev->dev, "Failed to suspend functions: %d\n",
952 retval);
954 rmi_disable_irq(rmi_dev, enable_wake);
955 return retval;
957 EXPORT_SYMBOL_GPL(rmi_driver_suspend);
959 int rmi_driver_resume(struct rmi_device *rmi_dev, bool clear_wake)
961 int retval;
963 rmi_enable_irq(rmi_dev, clear_wake);
965 retval = rmi_resume_functions(rmi_dev);
966 if (retval)
967 dev_warn(&rmi_dev->dev, "Failed to suspend functions: %d\n",
968 retval);
970 return retval;
972 EXPORT_SYMBOL_GPL(rmi_driver_resume);
974 static int rmi_driver_remove(struct device *dev)
976 struct rmi_device *rmi_dev = to_rmi_device(dev);
977 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
979 rmi_disable_irq(rmi_dev, false);
981 irq_domain_remove(data->irqdomain);
982 data->irqdomain = NULL;
984 rmi_f34_remove_sysfs(rmi_dev);
985 rmi_free_function_list(rmi_dev);
987 return 0;
990 #ifdef CONFIG_OF
991 static int rmi_driver_of_probe(struct device *dev,
992 struct rmi_device_platform_data *pdata)
994 int retval;
996 retval = rmi_of_property_read_u32(dev, &pdata->reset_delay_ms,
997 "syna,reset-delay-ms", 1);
998 if (retval)
999 return retval;
1001 return 0;
1003 #else
1004 static inline int rmi_driver_of_probe(struct device *dev,
1005 struct rmi_device_platform_data *pdata)
1007 return -ENODEV;
1009 #endif
1011 int rmi_probe_interrupts(struct rmi_driver_data *data)
1013 struct rmi_device *rmi_dev = data->rmi_dev;
1014 struct device *dev = &rmi_dev->dev;
1015 struct fwnode_handle *fwnode = rmi_dev->xport->dev->fwnode;
1016 int irq_count = 0;
1017 size_t size;
1018 int retval;
1021 * We need to count the IRQs and allocate their storage before scanning
1022 * the PDT and creating the function entries, because adding a new
1023 * function can trigger events that result in the IRQ related storage
1024 * being accessed.
1026 rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Counting IRQs.\n", __func__);
1027 data->bootloader_mode = false;
1029 retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_count_irqs);
1030 if (retval < 0) {
1031 dev_err(dev, "IRQ counting failed with code %d.\n", retval);
1032 return retval;
1035 if (data->bootloader_mode)
1036 dev_warn(dev, "Device in bootloader mode.\n");
1038 /* Allocate and register a linear revmap irq_domain */
1039 data->irqdomain = irq_domain_create_linear(fwnode, irq_count,
1040 &irq_domain_simple_ops,
1041 data);
1042 if (!data->irqdomain) {
1043 dev_err(&rmi_dev->dev, "Failed to create IRQ domain\n");
1044 return -ENOMEM;
1047 data->irq_count = irq_count;
1048 data->num_of_irq_regs = (data->irq_count + 7) / 8;
1050 size = BITS_TO_LONGS(data->irq_count) * sizeof(unsigned long);
1051 data->irq_memory = devm_kcalloc(dev, size, 4, GFP_KERNEL);
1052 if (!data->irq_memory) {
1053 dev_err(dev, "Failed to allocate memory for irq masks.\n");
1054 return -ENOMEM;
1057 data->irq_status = data->irq_memory + size * 0;
1058 data->fn_irq_bits = data->irq_memory + size * 1;
1059 data->current_irq_mask = data->irq_memory + size * 2;
1060 data->new_irq_mask = data->irq_memory + size * 3;
1062 return retval;
1065 int rmi_init_functions(struct rmi_driver_data *data)
1067 struct rmi_device *rmi_dev = data->rmi_dev;
1068 struct device *dev = &rmi_dev->dev;
1069 int irq_count = 0;
1070 int retval;
1072 rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Creating functions.\n", __func__);
1073 retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_create_function);
1074 if (retval < 0) {
1075 dev_err(dev, "Function creation failed with code %d.\n",
1076 retval);
1077 goto err_destroy_functions;
1080 if (!data->f01_container) {
1081 dev_err(dev, "Missing F01 container!\n");
1082 retval = -EINVAL;
1083 goto err_destroy_functions;
1086 retval = rmi_read_block(rmi_dev,
1087 data->f01_container->fd.control_base_addr + 1,
1088 data->current_irq_mask, data->num_of_irq_regs);
1089 if (retval < 0) {
1090 dev_err(dev, "%s: Failed to read current IRQ mask.\n",
1091 __func__);
1092 goto err_destroy_functions;
1095 return 0;
1097 err_destroy_functions:
1098 rmi_free_function_list(rmi_dev);
1099 return retval;
1102 static int rmi_driver_probe(struct device *dev)
1104 struct rmi_driver *rmi_driver;
1105 struct rmi_driver_data *data;
1106 struct rmi_device_platform_data *pdata;
1107 struct rmi_device *rmi_dev;
1108 int retval;
1110 rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Starting probe.\n",
1111 __func__);
1113 if (!rmi_is_physical_device(dev)) {
1114 rmi_dbg(RMI_DEBUG_CORE, dev, "Not a physical device.\n");
1115 return -ENODEV;
1118 rmi_dev = to_rmi_device(dev);
1119 rmi_driver = to_rmi_driver(dev->driver);
1120 rmi_dev->driver = rmi_driver;
1122 pdata = rmi_get_platform_data(rmi_dev);
1124 if (rmi_dev->xport->dev->of_node) {
1125 retval = rmi_driver_of_probe(rmi_dev->xport->dev, pdata);
1126 if (retval)
1127 return retval;
1130 data = devm_kzalloc(dev, sizeof(struct rmi_driver_data), GFP_KERNEL);
1131 if (!data)
1132 return -ENOMEM;
1134 INIT_LIST_HEAD(&data->function_list);
1135 data->rmi_dev = rmi_dev;
1136 dev_set_drvdata(&rmi_dev->dev, data);
1139 * Right before a warm boot, the sensor might be in some unusual state,
1140 * such as F54 diagnostics, or F34 bootloader mode after a firmware
1141 * or configuration update. In order to clear the sensor to a known
1142 * state and/or apply any updates, we issue a initial reset to clear any
1143 * previous settings and force it into normal operation.
1145 * We have to do this before actually building the PDT because
1146 * the reflash updates (if any) might cause various registers to move
1147 * around.
1149 * For a number of reasons, this initial reset may fail to return
1150 * within the specified time, but we'll still be able to bring up the
1151 * driver normally after that failure. This occurs most commonly in
1152 * a cold boot situation (where then firmware takes longer to come up
1153 * than from a warm boot) and the reset_delay_ms in the platform data
1154 * has been set too short to accommodate that. Since the sensor will
1155 * eventually come up and be usable, we don't want to just fail here
1156 * and leave the customer's device unusable. So we warn them, and
1157 * continue processing.
1159 retval = rmi_scan_pdt(rmi_dev, NULL, rmi_initial_reset);
1160 if (retval < 0)
1161 dev_warn(dev, "RMI initial reset failed! Continuing in spite of this.\n");
1163 retval = rmi_read(rmi_dev, PDT_PROPERTIES_LOCATION, &data->pdt_props);
1164 if (retval < 0) {
1166 * we'll print out a warning and continue since
1167 * failure to get the PDT properties is not a cause to fail
1169 dev_warn(dev, "Could not read PDT properties from %#06x (code %d). Assuming 0x00.\n",
1170 PDT_PROPERTIES_LOCATION, retval);
1173 mutex_init(&data->irq_mutex);
1174 mutex_init(&data->enabled_mutex);
1176 retval = rmi_probe_interrupts(data);
1177 if (retval)
1178 goto err;
1180 if (rmi_dev->xport->input) {
1182 * The transport driver already has an input device.
1183 * In some cases it is preferable to reuse the transport
1184 * devices input device instead of creating a new one here.
1185 * One example is some HID touchpads report "pass-through"
1186 * button events are not reported by rmi registers.
1188 data->input = rmi_dev->xport->input;
1189 } else {
1190 data->input = devm_input_allocate_device(dev);
1191 if (!data->input) {
1192 dev_err(dev, "%s: Failed to allocate input device.\n",
1193 __func__);
1194 retval = -ENOMEM;
1195 goto err;
1197 rmi_driver_set_input_params(rmi_dev, data->input);
1198 data->input->phys = devm_kasprintf(dev, GFP_KERNEL,
1199 "%s/input0", dev_name(dev));
1202 retval = rmi_init_functions(data);
1203 if (retval)
1204 goto err;
1206 retval = rmi_f34_create_sysfs(rmi_dev);
1207 if (retval)
1208 goto err;
1210 if (data->input) {
1211 rmi_driver_set_input_name(rmi_dev, data->input);
1212 if (!rmi_dev->xport->input) {
1213 retval = input_register_device(data->input);
1214 if (retval) {
1215 dev_err(dev, "%s: Failed to register input device.\n",
1216 __func__);
1217 goto err_destroy_functions;
1222 retval = rmi_irq_init(rmi_dev);
1223 if (retval < 0)
1224 goto err_destroy_functions;
1226 if (data->f01_container->dev.driver) {
1227 /* Driver already bound, so enable ATTN now. */
1228 retval = rmi_enable_sensor(rmi_dev);
1229 if (retval)
1230 goto err_disable_irq;
1233 return 0;
1235 err_disable_irq:
1236 rmi_disable_irq(rmi_dev, false);
1237 err_destroy_functions:
1238 rmi_free_function_list(rmi_dev);
1239 err:
1240 return retval;
1243 static struct rmi_driver rmi_physical_driver = {
1244 .driver = {
1245 .owner = THIS_MODULE,
1246 .name = "rmi4_physical",
1247 .bus = &rmi_bus_type,
1248 .probe = rmi_driver_probe,
1249 .remove = rmi_driver_remove,
1251 .reset_handler = rmi_driver_reset_handler,
1252 .clear_irq_bits = rmi_driver_clear_irq_bits,
1253 .set_irq_bits = rmi_driver_set_irq_bits,
1254 .set_input_params = rmi_driver_set_input_params,
1257 bool rmi_is_physical_driver(struct device_driver *drv)
1259 return drv == &rmi_physical_driver.driver;
1262 int __init rmi_register_physical_driver(void)
1264 int error;
1266 error = driver_register(&rmi_physical_driver.driver);
1267 if (error) {
1268 pr_err("%s: driver register failed, code=%d.\n", __func__,
1269 error);
1270 return error;
1273 return 0;
1276 void __exit rmi_unregister_physical_driver(void)
1278 driver_unregister(&rmi_physical_driver.driver);