Merge tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block
[linux/fpc-iii.git] / drivers / leds / leds-lp50xx.c
blobf13117eed976d90e792d990e55caf304765305b4
1 // SPDX-License-Identifier: GPL-2.0
2 // TI LP50XX LED chip family driver
3 // Copyright (C) 2018-20 Texas Instruments Incorporated - https://www.ti.com/
5 #include <linux/gpio/consumer.h>
6 #include <linux/i2c.h>
7 #include <linux/init.h>
8 #include <linux/leds.h>
9 #include <linux/module.h>
10 #include <linux/mutex.h>
11 #include <linux/of.h>
12 #include <linux/of_gpio.h>
13 #include <linux/regmap.h>
14 #include <linux/regulator/consumer.h>
15 #include <linux/slab.h>
16 #include <uapi/linux/uleds.h>
18 #include <linux/led-class-multicolor.h>
20 #include "leds.h"
22 #define LP50XX_DEV_CFG0 0x00
23 #define LP50XX_DEV_CFG1 0x01
24 #define LP50XX_LED_CFG0 0x02
26 /* LP5009 and LP5012 registers */
27 #define LP5012_BNK_BRT 0x03
28 #define LP5012_BNKA_CLR 0x04
29 #define LP5012_BNKB_CLR 0x05
30 #define LP5012_BNKC_CLR 0x06
31 #define LP5012_LED0_BRT 0x07
32 #define LP5012_OUT0_CLR 0x0b
33 #define LP5012_RESET 0x17
35 /* LP5018 and LP5024 registers */
36 #define LP5024_BNK_BRT 0x03
37 #define LP5024_BNKA_CLR 0x04
38 #define LP5024_BNKB_CLR 0x05
39 #define LP5024_BNKC_CLR 0x06
40 #define LP5024_LED0_BRT 0x07
41 #define LP5024_OUT0_CLR 0x0f
42 #define LP5024_RESET 0x27
44 /* LP5030 and LP5036 registers */
45 #define LP5036_LED_CFG1 0x03
46 #define LP5036_BNK_BRT 0x04
47 #define LP5036_BNKA_CLR 0x05
48 #define LP5036_BNKB_CLR 0x06
49 #define LP5036_BNKC_CLR 0x07
50 #define LP5036_LED0_BRT 0x08
51 #define LP5036_OUT0_CLR 0x14
52 #define LP5036_RESET 0x38
54 #define LP50XX_SW_RESET 0xff
55 #define LP50XX_CHIP_EN BIT(6)
57 /* There are 3 LED outputs per bank */
58 #define LP50XX_LEDS_PER_MODULE 3
60 #define LP5009_MAX_LED_MODULES 2
61 #define LP5012_MAX_LED_MODULES 4
62 #define LP5018_MAX_LED_MODULES 6
63 #define LP5024_MAX_LED_MODULES 8
64 #define LP5030_MAX_LED_MODULES 10
65 #define LP5036_MAX_LED_MODULES 12
67 static const struct reg_default lp5012_reg_defs[] = {
68 {LP50XX_DEV_CFG0, 0x0},
69 {LP50XX_DEV_CFG1, 0x3c},
70 {LP50XX_LED_CFG0, 0x0},
71 {LP5012_BNK_BRT, 0xff},
72 {LP5012_BNKA_CLR, 0x0f},
73 {LP5012_BNKB_CLR, 0x0f},
74 {LP5012_BNKC_CLR, 0x0f},
75 {LP5012_LED0_BRT, 0x0f},
76 /* LEDX_BRT registers are all 0xff for defaults */
77 {0x08, 0xff}, {0x09, 0xff}, {0x0a, 0xff},
78 {LP5012_OUT0_CLR, 0x0f},
79 /* OUTX_CLR registers are all 0x0 for defaults */
80 {0x0c, 0x00}, {0x0d, 0x00}, {0x0e, 0x00}, {0x0f, 0x00}, {0x10, 0x00},
81 {0x11, 0x00}, {0x12, 0x00}, {0x13, 0x00}, {0x14, 0x00}, {0x15, 0x00},
82 {0x16, 0x00},
83 {LP5012_RESET, 0x00}
86 static const struct reg_default lp5024_reg_defs[] = {
87 {LP50XX_DEV_CFG0, 0x0},
88 {LP50XX_DEV_CFG1, 0x3c},
89 {LP50XX_LED_CFG0, 0x0},
90 {LP5024_BNK_BRT, 0xff},
91 {LP5024_BNKA_CLR, 0x0f},
92 {LP5024_BNKB_CLR, 0x0f},
93 {LP5024_BNKC_CLR, 0x0f},
94 {LP5024_LED0_BRT, 0x0f},
95 /* LEDX_BRT registers are all 0xff for defaults */
96 {0x08, 0xff}, {0x09, 0xff}, {0x0a, 0xff}, {0x0b, 0xff}, {0x0c, 0xff},
97 {0x0d, 0xff}, {0x0e, 0xff},
98 {LP5024_OUT0_CLR, 0x0f},
99 /* OUTX_CLR registers are all 0x0 for defaults */
100 {0x10, 0x00}, {0x11, 0x00}, {0x12, 0x00}, {0x13, 0x00}, {0x14, 0x00},
101 {0x15, 0x00}, {0x16, 0x00}, {0x17, 0x00}, {0x18, 0x00}, {0x19, 0x00},
102 {0x1a, 0x00}, {0x1b, 0x00}, {0x1c, 0x00}, {0x1d, 0x00}, {0x1e, 0x00},
103 {0x1f, 0x00}, {0x20, 0x00}, {0x21, 0x00}, {0x22, 0x00}, {0x23, 0x00},
104 {0x24, 0x00}, {0x25, 0x00}, {0x26, 0x00},
105 {LP5024_RESET, 0x00}
108 static const struct reg_default lp5036_reg_defs[] = {
109 {LP50XX_DEV_CFG0, 0x0},
110 {LP50XX_DEV_CFG1, 0x3c},
111 {LP50XX_LED_CFG0, 0x0},
112 {LP5036_LED_CFG1, 0x0},
113 {LP5036_BNK_BRT, 0xff},
114 {LP5036_BNKA_CLR, 0x0f},
115 {LP5036_BNKB_CLR, 0x0f},
116 {LP5036_BNKC_CLR, 0x0f},
117 {LP5036_LED0_BRT, 0x0f},
118 /* LEDX_BRT registers are all 0xff for defaults */
119 {0x08, 0xff}, {0x09, 0xff}, {0x0a, 0xff}, {0x0b, 0xff}, {0x0c, 0xff},
120 {0x0d, 0xff}, {0x0e, 0xff}, {0x0f, 0xff}, {0x10, 0xff}, {0x11, 0xff},
121 {0x12, 0xff}, {0x13, 0xff},
122 {LP5036_OUT0_CLR, 0x0f},
123 /* OUTX_CLR registers are all 0x0 for defaults */
124 {0x15, 0x00}, {0x16, 0x00}, {0x17, 0x00}, {0x18, 0x00}, {0x19, 0x00},
125 {0x1a, 0x00}, {0x1b, 0x00}, {0x1c, 0x00}, {0x1d, 0x00}, {0x1e, 0x00},
126 {0x1f, 0x00}, {0x20, 0x00}, {0x21, 0x00}, {0x22, 0x00}, {0x23, 0x00},
127 {0x24, 0x00}, {0x25, 0x00}, {0x26, 0x00}, {0x27, 0x00}, {0x28, 0x00},
128 {0x29, 0x00}, {0x2a, 0x00}, {0x2b, 0x00}, {0x2c, 0x00}, {0x2d, 0x00},
129 {0x2e, 0x00}, {0x2f, 0x00}, {0x30, 0x00}, {0x31, 0x00}, {0x32, 0x00},
130 {0x33, 0x00}, {0x34, 0x00}, {0x35, 0x00}, {0x36, 0x00}, {0x37, 0x00},
131 {LP5036_RESET, 0x00}
134 static const struct regmap_config lp5012_regmap_config = {
135 .reg_bits = 8,
136 .val_bits = 8,
138 .max_register = LP5012_RESET,
139 .reg_defaults = lp5012_reg_defs,
140 .num_reg_defaults = ARRAY_SIZE(lp5012_reg_defs),
141 .cache_type = REGCACHE_FLAT,
144 static const struct regmap_config lp5024_regmap_config = {
145 .reg_bits = 8,
146 .val_bits = 8,
148 .max_register = LP5024_RESET,
149 .reg_defaults = lp5024_reg_defs,
150 .num_reg_defaults = ARRAY_SIZE(lp5024_reg_defs),
151 .cache_type = REGCACHE_FLAT,
154 static const struct regmap_config lp5036_regmap_config = {
155 .reg_bits = 8,
156 .val_bits = 8,
158 .max_register = LP5036_RESET,
159 .reg_defaults = lp5036_reg_defs,
160 .num_reg_defaults = ARRAY_SIZE(lp5036_reg_defs),
161 .cache_type = REGCACHE_FLAT,
164 enum lp50xx_model {
165 LP5009,
166 LP5012,
167 LP5018,
168 LP5024,
169 LP5030,
170 LP5036,
174 * struct lp50xx_chip_info -
175 * @lp50xx_regmap_config: regmap register configuration
176 * @model_id: LED device model
177 * @max_modules: total number of supported LED modules
178 * @num_leds: number of LED outputs available on the device
179 * @led_brightness0_reg: first brightness register of the device
180 * @mix_out0_reg: first color mix register of the device
181 * @bank_brt_reg: bank brightness register
182 * @bank_mix_reg: color mix register
183 * @reset_reg: device reset register
185 struct lp50xx_chip_info {
186 const struct regmap_config *lp50xx_regmap_config;
187 int model_id;
188 u8 max_modules;
189 u8 num_leds;
190 u8 led_brightness0_reg;
191 u8 mix_out0_reg;
192 u8 bank_brt_reg;
193 u8 bank_mix_reg;
194 u8 reset_reg;
197 static const struct lp50xx_chip_info lp50xx_chip_info_tbl[] = {
198 [LP5009] = {
199 .model_id = LP5009,
200 .max_modules = LP5009_MAX_LED_MODULES,
201 .num_leds = LP5009_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
202 .led_brightness0_reg = LP5012_LED0_BRT,
203 .mix_out0_reg = LP5012_OUT0_CLR,
204 .bank_brt_reg = LP5012_BNK_BRT,
205 .bank_mix_reg = LP5012_BNKA_CLR,
206 .reset_reg = LP5012_RESET,
207 .lp50xx_regmap_config = &lp5012_regmap_config,
209 [LP5012] = {
210 .model_id = LP5012,
211 .max_modules = LP5012_MAX_LED_MODULES,
212 .num_leds = LP5012_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
213 .led_brightness0_reg = LP5012_LED0_BRT,
214 .mix_out0_reg = LP5012_OUT0_CLR,
215 .bank_brt_reg = LP5012_BNK_BRT,
216 .bank_mix_reg = LP5012_BNKA_CLR,
217 .reset_reg = LP5012_RESET,
218 .lp50xx_regmap_config = &lp5012_regmap_config,
220 [LP5018] = {
221 .model_id = LP5018,
222 .max_modules = LP5018_MAX_LED_MODULES,
223 .num_leds = LP5018_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
224 .led_brightness0_reg = LP5024_LED0_BRT,
225 .mix_out0_reg = LP5024_OUT0_CLR,
226 .bank_brt_reg = LP5024_BNK_BRT,
227 .bank_mix_reg = LP5024_BNKA_CLR,
228 .reset_reg = LP5024_RESET,
229 .lp50xx_regmap_config = &lp5024_regmap_config,
231 [LP5024] = {
232 .model_id = LP5024,
233 .max_modules = LP5024_MAX_LED_MODULES,
234 .num_leds = LP5024_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
235 .led_brightness0_reg = LP5024_LED0_BRT,
236 .mix_out0_reg = LP5024_OUT0_CLR,
237 .bank_brt_reg = LP5024_BNK_BRT,
238 .bank_mix_reg = LP5024_BNKA_CLR,
239 .reset_reg = LP5024_RESET,
240 .lp50xx_regmap_config = &lp5024_regmap_config,
242 [LP5030] = {
243 .model_id = LP5030,
244 .max_modules = LP5030_MAX_LED_MODULES,
245 .num_leds = LP5030_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
246 .led_brightness0_reg = LP5036_LED0_BRT,
247 .mix_out0_reg = LP5036_OUT0_CLR,
248 .bank_brt_reg = LP5036_BNK_BRT,
249 .bank_mix_reg = LP5036_BNKA_CLR,
250 .reset_reg = LP5036_RESET,
251 .lp50xx_regmap_config = &lp5036_regmap_config,
253 [LP5036] = {
254 .model_id = LP5036,
255 .max_modules = LP5036_MAX_LED_MODULES,
256 .num_leds = LP5036_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE,
257 .led_brightness0_reg = LP5036_LED0_BRT,
258 .mix_out0_reg = LP5036_OUT0_CLR,
259 .bank_brt_reg = LP5036_BNK_BRT,
260 .bank_mix_reg = LP5036_BNKA_CLR,
261 .reset_reg = LP5036_RESET,
262 .lp50xx_regmap_config = &lp5036_regmap_config,
266 struct lp50xx_led {
267 struct led_classdev_mc mc_cdev;
268 struct lp50xx *priv;
269 unsigned long bank_modules;
270 int led_intensity[LP50XX_LEDS_PER_MODULE];
271 u8 ctrl_bank_enabled;
272 int led_number;
276 * struct lp50xx -
277 * @enable_gpio: hardware enable gpio
278 * @regulator: LED supply regulator pointer
279 * @client: pointer to the I2C client
280 * @regmap: device register map
281 * @dev: pointer to the devices device struct
282 * @lock: lock for reading/writing the device
283 * @chip_info: chip specific information (ie num_leds)
284 * @num_of_banked_leds: holds the number of banked LEDs
285 * @leds: array of LED strings
287 struct lp50xx {
288 struct gpio_desc *enable_gpio;
289 struct regulator *regulator;
290 struct i2c_client *client;
291 struct regmap *regmap;
292 struct device *dev;
293 struct mutex lock;
294 const struct lp50xx_chip_info *chip_info;
295 int num_of_banked_leds;
297 /* This needs to be at the end of the struct */
298 struct lp50xx_led leds[];
301 static struct lp50xx_led *mcled_cdev_to_led(struct led_classdev_mc *mc_cdev)
303 return container_of(mc_cdev, struct lp50xx_led, mc_cdev);
306 static int lp50xx_brightness_set(struct led_classdev *cdev,
307 enum led_brightness brightness)
309 struct led_classdev_mc *mc_dev = lcdev_to_mccdev(cdev);
310 struct lp50xx_led *led = mcled_cdev_to_led(mc_dev);
311 const struct lp50xx_chip_info *led_chip = led->priv->chip_info;
312 u8 led_offset, reg_val;
313 int ret = 0;
314 int i;
316 mutex_lock(&led->priv->lock);
317 if (led->ctrl_bank_enabled)
318 reg_val = led_chip->bank_brt_reg;
319 else
320 reg_val = led_chip->led_brightness0_reg +
321 led->led_number;
323 ret = regmap_write(led->priv->regmap, reg_val, brightness);
324 if (ret) {
325 dev_err(&led->priv->client->dev,
326 "Cannot write brightness value %d\n", ret);
327 goto out;
330 for (i = 0; i < led->mc_cdev.num_colors; i++) {
331 if (led->ctrl_bank_enabled) {
332 reg_val = led_chip->bank_mix_reg + i;
333 } else {
334 led_offset = (led->led_number * 3) + i;
335 reg_val = led_chip->mix_out0_reg + led_offset;
338 ret = regmap_write(led->priv->regmap, reg_val,
339 mc_dev->subled_info[i].intensity);
340 if (ret) {
341 dev_err(&led->priv->client->dev,
342 "Cannot write intensity value %d\n", ret);
343 goto out;
346 out:
347 mutex_unlock(&led->priv->lock);
348 return ret;
351 static int lp50xx_set_banks(struct lp50xx *priv, u32 led_banks[])
353 u8 led_config_lo, led_config_hi;
354 u32 bank_enable_mask = 0;
355 int ret;
356 int i;
358 for (i = 0; i < priv->chip_info->max_modules; i++) {
359 if (led_banks[i])
360 bank_enable_mask |= (1 << led_banks[i]);
363 led_config_lo = (u8)(bank_enable_mask & 0xff);
364 led_config_hi = (u8)(bank_enable_mask >> 8) & 0xff;
366 ret = regmap_write(priv->regmap, LP50XX_LED_CFG0, led_config_lo);
367 if (ret)
368 return ret;
370 if (priv->chip_info->model_id >= LP5030)
371 ret = regmap_write(priv->regmap, LP5036_LED_CFG1, led_config_hi);
373 return ret;
376 static int lp50xx_reset(struct lp50xx *priv)
378 return regmap_write(priv->regmap, priv->chip_info->reset_reg, LP50XX_SW_RESET);
381 static int lp50xx_enable_disable(struct lp50xx *priv, int enable_disable)
383 int ret;
385 if (priv->enable_gpio) {
386 ret = gpiod_direction_output(priv->enable_gpio, enable_disable);
387 if (ret)
388 return ret;
391 if (enable_disable)
392 return regmap_write(priv->regmap, LP50XX_DEV_CFG0, LP50XX_CHIP_EN);
393 else
394 return regmap_write(priv->regmap, LP50XX_DEV_CFG0, 0);
398 static int lp50xx_probe_leds(struct fwnode_handle *child, struct lp50xx *priv,
399 struct lp50xx_led *led, int num_leds)
401 u32 led_banks[LP5036_MAX_LED_MODULES] = {0};
402 int led_number;
403 int ret;
405 if (num_leds > 1) {
406 if (num_leds > priv->chip_info->max_modules) {
407 dev_err(&priv->client->dev, "reg property is invalid\n");
408 return -EINVAL;
411 priv->num_of_banked_leds = num_leds;
413 ret = fwnode_property_read_u32_array(child, "reg", led_banks, num_leds);
414 if (ret) {
415 dev_err(&priv->client->dev, "reg property is missing\n");
416 return ret;
419 ret = lp50xx_set_banks(priv, led_banks);
420 if (ret) {
421 dev_err(&priv->client->dev, "Cannot setup banked LEDs\n");
422 return ret;
425 led->ctrl_bank_enabled = 1;
426 } else {
427 ret = fwnode_property_read_u32(child, "reg", &led_number);
428 if (ret) {
429 dev_err(&priv->client->dev, "led reg property missing\n");
430 return ret;
433 if (led_number > priv->chip_info->num_leds) {
434 dev_err(&priv->client->dev, "led-sources property is invalid\n");
435 return -EINVAL;
438 led->led_number = led_number;
441 return 0;
444 static int lp50xx_probe_dt(struct lp50xx *priv)
446 struct fwnode_handle *child = NULL;
447 struct fwnode_handle *led_node = NULL;
448 struct led_init_data init_data = {};
449 struct led_classdev *led_cdev;
450 struct mc_subled *mc_led_info;
451 struct lp50xx_led *led;
452 int ret = -EINVAL;
453 int num_colors;
454 u32 color_id;
455 int i = 0;
457 priv->enable_gpio = devm_gpiod_get_optional(priv->dev, "enable", GPIOD_OUT_LOW);
458 if (IS_ERR(priv->enable_gpio)) {
459 ret = PTR_ERR(priv->enable_gpio);
460 dev_err(&priv->client->dev, "Failed to get enable gpio: %d\n",
461 ret);
462 return ret;
465 priv->regulator = devm_regulator_get(priv->dev, "vled");
466 if (IS_ERR(priv->regulator))
467 priv->regulator = NULL;
469 device_for_each_child_node(priv->dev, child) {
470 led = &priv->leds[i];
471 ret = fwnode_property_count_u32(child, "reg");
472 if (ret < 0) {
473 dev_err(&priv->client->dev, "reg property is invalid\n");
474 goto child_out;
477 ret = lp50xx_probe_leds(child, priv, led, ret);
478 if (ret)
479 goto child_out;
481 init_data.fwnode = child;
482 num_colors = 0;
485 * There are only 3 LEDs per module otherwise they should be
486 * banked which also is presented as 3 LEDs.
488 mc_led_info = devm_kcalloc(priv->dev, LP50XX_LEDS_PER_MODULE,
489 sizeof(*mc_led_info), GFP_KERNEL);
490 if (!mc_led_info) {
491 ret = -ENOMEM;
492 goto child_out;
495 fwnode_for_each_child_node(child, led_node) {
496 ret = fwnode_property_read_u32(led_node, "color",
497 &color_id);
498 if (ret) {
499 dev_err(priv->dev, "Cannot read color\n");
500 goto child_out;
503 mc_led_info[num_colors].color_index = color_id;
504 num_colors++;
507 led->priv = priv;
508 led->mc_cdev.num_colors = num_colors;
509 led->mc_cdev.subled_info = mc_led_info;
510 led_cdev = &led->mc_cdev.led_cdev;
511 led_cdev->brightness_set_blocking = lp50xx_brightness_set;
513 ret = devm_led_classdev_multicolor_register_ext(&priv->client->dev,
514 &led->mc_cdev,
515 &init_data);
516 if (ret) {
517 dev_err(&priv->client->dev, "led register err: %d\n",
518 ret);
519 goto child_out;
521 i++;
522 fwnode_handle_put(child);
525 return 0;
527 child_out:
528 fwnode_handle_put(child);
529 return ret;
532 static int lp50xx_probe(struct i2c_client *client,
533 const struct i2c_device_id *id)
535 struct lp50xx *led;
536 int count;
537 int ret;
539 count = device_get_child_node_count(&client->dev);
540 if (!count) {
541 dev_err(&client->dev, "LEDs are not defined in device tree!");
542 return -ENODEV;
545 led = devm_kzalloc(&client->dev, struct_size(led, leds, count),
546 GFP_KERNEL);
547 if (!led)
548 return -ENOMEM;
550 mutex_init(&led->lock);
551 led->client = client;
552 led->dev = &client->dev;
553 led->chip_info = &lp50xx_chip_info_tbl[id->driver_data];
554 i2c_set_clientdata(client, led);
555 led->regmap = devm_regmap_init_i2c(client,
556 led->chip_info->lp50xx_regmap_config);
557 if (IS_ERR(led->regmap)) {
558 ret = PTR_ERR(led->regmap);
559 dev_err(&client->dev, "Failed to allocate register map: %d\n",
560 ret);
561 return ret;
564 ret = lp50xx_reset(led);
565 if (ret)
566 return ret;
568 ret = lp50xx_enable_disable(led, 1);
569 if (ret)
570 return ret;
572 return lp50xx_probe_dt(led);
575 static int lp50xx_remove(struct i2c_client *client)
577 struct lp50xx *led = i2c_get_clientdata(client);
578 int ret;
580 ret = lp50xx_enable_disable(led, 0);
581 if (ret) {
582 dev_err(&led->client->dev, "Failed to disable chip\n");
583 return ret;
586 if (led->regulator) {
587 ret = regulator_disable(led->regulator);
588 if (ret)
589 dev_err(&led->client->dev,
590 "Failed to disable regulator\n");
593 mutex_destroy(&led->lock);
595 return 0;
598 static const struct i2c_device_id lp50xx_id[] = {
599 { "lp5009", LP5009 },
600 { "lp5012", LP5012 },
601 { "lp5018", LP5018 },
602 { "lp5024", LP5024 },
603 { "lp5030", LP5030 },
604 { "lp5036", LP5036 },
607 MODULE_DEVICE_TABLE(i2c, lp50xx_id);
609 static const struct of_device_id of_lp50xx_leds_match[] = {
610 { .compatible = "ti,lp5009", .data = (void *)LP5009 },
611 { .compatible = "ti,lp5012", .data = (void *)LP5012 },
612 { .compatible = "ti,lp5018", .data = (void *)LP5018 },
613 { .compatible = "ti,lp5024", .data = (void *)LP5024 },
614 { .compatible = "ti,lp5030", .data = (void *)LP5030 },
615 { .compatible = "ti,lp5036", .data = (void *)LP5036 },
618 MODULE_DEVICE_TABLE(of, of_lp50xx_leds_match);
620 static struct i2c_driver lp50xx_driver = {
621 .driver = {
622 .name = "lp50xx",
623 .of_match_table = of_lp50xx_leds_match,
625 .probe = lp50xx_probe,
626 .remove = lp50xx_remove,
627 .id_table = lp50xx_id,
629 module_i2c_driver(lp50xx_driver);
631 MODULE_DESCRIPTION("Texas Instruments LP50XX LED driver");
632 MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
633 MODULE_LICENSE("GPL v2");