1 // SPDX-License-Identifier: GPL-2.0-only
3 * Windfarm PowerMac thermal control. LM75 sensor
5 * (c) Copyright 2005 Benjamin Herrenschmidt, IBM Corp.
6 * <benh@kernel.crashing.org>
9 #include <linux/types.h>
10 #include <linux/errno.h>
11 #include <linux/kernel.h>
12 #include <linux/delay.h>
13 #include <linux/slab.h>
14 #include <linux/init.h>
15 #include <linux/wait.h>
16 #include <linux/i2c.h>
17 #include <linux/of_device.h>
19 #include <asm/machdep.h>
21 #include <asm/sections.h>
22 #include <asm/pmac_low_i2c.h>
31 #define DBG(args...) printk(args)
33 #define DBG(args...) do { } while(0)
36 struct wf_lm75_sensor
{
39 struct i2c_client
*i2c
;
40 struct wf_sensor sens
;
42 #define wf_to_lm75(c) container_of(c, struct wf_lm75_sensor, sens)
44 static int wf_lm75_get(struct wf_sensor
*sr
, s32
*value
)
46 struct wf_lm75_sensor
*lm
= wf_to_lm75(sr
);
52 /* Init chip if necessary */
54 u8 cfg_new
, cfg
= (u8
)i2c_smbus_read_byte_data(lm
->i2c
, 1);
56 DBG("wf_lm75: Initializing %s, cfg was: %02x\n",
59 /* clear shutdown bit, keep other settings as left by
60 * the firmware for now
62 cfg_new
= cfg
& ~0x01;
63 i2c_smbus_write_byte_data(lm
->i2c
, 1, cfg_new
);
66 /* If we just powered it up, let's wait 200 ms */
70 /* Read temperature register */
71 data
= (s32
)le16_to_cpu(i2c_smbus_read_word_data(lm
->i2c
, 0));
78 static void wf_lm75_release(struct wf_sensor
*sr
)
80 struct wf_lm75_sensor
*lm
= wf_to_lm75(sr
);
85 static const struct wf_sensor_ops wf_lm75_ops
= {
86 .get_value
= wf_lm75_get
,
87 .release
= wf_lm75_release
,
91 static int wf_lm75_probe(struct i2c_client
*client
,
92 const struct i2c_device_id
*id
)
94 struct wf_lm75_sensor
*lm
;
96 const char *name
, *loc
;
99 ds1775
= id
->driver_data
;
101 ds1775
= !!of_device_get_match_data(&client
->dev
);
103 DBG("wf_lm75: creating %s device at address 0x%02x\n",
104 ds1775
? "ds1775" : "lm75", client
->addr
);
106 loc
= of_get_property(client
->dev
.of_node
, "hwsensor-location", NULL
);
108 dev_warn(&client
->dev
, "Missing hwsensor-location property!\n");
112 /* Usual rant about sensor names not beeing very consistent in
113 * the device-tree, oh well ...
114 * Add more entries below as you deal with more setups
116 if (!strcmp(loc
, "Hard drive") || !strcmp(loc
, "DRIVE BAY"))
118 else if (!strcmp(loc
, "Incoming Air Temp"))
119 name
= "incoming-air-temp";
120 else if (!strcmp(loc
, "ODD Temp"))
121 name
= "optical-drive-temp";
122 else if (!strcmp(loc
, "HD Temp"))
123 name
= "hard-drive-temp";
124 else if (!strcmp(loc
, "PCI SLOTS"))
126 else if (!strcmp(loc
, "CPU A INLET"))
127 name
= "cpu-inlet-temp-0";
128 else if (!strcmp(loc
, "CPU B INLET"))
129 name
= "cpu-inlet-temp-1";
134 lm
= kzalloc(sizeof(struct wf_lm75_sensor
), GFP_KERNEL
);
141 lm
->sens
.name
= name
;
142 lm
->sens
.ops
= &wf_lm75_ops
;
143 i2c_set_clientdata(client
, lm
);
145 rc
= wf_register_sensor(&lm
->sens
);
151 static int wf_lm75_remove(struct i2c_client
*client
)
153 struct wf_lm75_sensor
*lm
= i2c_get_clientdata(client
);
155 /* Mark client detached */
159 wf_unregister_sensor(&lm
->sens
);
164 static const struct i2c_device_id wf_lm75_id
[] = {
169 MODULE_DEVICE_TABLE(i2c
, wf_lm75_id
);
171 static const struct of_device_id wf_lm75_of_id
[] = {
172 { .compatible
= "lm75", .data
= (void *)0},
173 { .compatible
= "ds1775", .data
= (void *)1 },
176 MODULE_DEVICE_TABLE(of
, wf_lm75_of_id
);
178 static struct i2c_driver wf_lm75_driver
= {
181 .of_match_table
= wf_lm75_of_id
,
183 .probe
= wf_lm75_probe
,
184 .remove
= wf_lm75_remove
,
185 .id_table
= wf_lm75_id
,
188 module_i2c_driver(wf_lm75_driver
);
190 MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
191 MODULE_DESCRIPTION("LM75 sensor objects for PowerMacs thermal control");
192 MODULE_LICENSE("GPL");