drivers/mfd/twl6040.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * MFD driver for TWL6040 audio device
   4  *
   5  * Authors:     Misael Lopez Cruz <misael.lopez@ti.com>
   6  *              Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
   7  *              Peter Ujfalusi <peter.ujfalusi@ti.com>
   8  *
   9  * Copyright:   (C) 2011 Texas Instruments, Inc.
  10  */
  11
  12 #include <linux/module.h>
  13 #include <linux/types.h>
  14 #include <linux/slab.h>
  15 #include <linux/kernel.h>
  16 #include <linux/err.h>
  17 #include <linux/platform_device.h>
  18 #include <linux/of.h>
  19 #include <linux/of_irq.h>
  20 #include <linux/of_gpio.h>
  21 #include <linux/of_platform.h>
  22 #include <linux/gpio.h>
  23 #include <linux/delay.h>
  24 #include <linux/i2c.h>
  25 #include <linux/regmap.h>
  26 #include <linux/mfd/core.h>
  27 #include <linux/mfd/twl6040.h>
  28 #include <linux/regulator/consumer.h>
  29
  30 #define VIBRACTRL_MEMBER(reg) ((reg == TWL6040_REG_VIBCTLL) ? 0 : 1)
  31 #define TWL6040_NUM_SUPPLIES    (2)
  32
  33 static const struct reg_default twl6040_defaults[] = {
  34         { 0x01, 0x4B }, /* REG_ASICID   (ro) */
  35         { 0x02, 0x00 }, /* REG_ASICREV  (ro) */
  36         { 0x03, 0x00 }, /* REG_INTID    */
  37         { 0x04, 0x00 }, /* REG_INTMR    */
  38         { 0x05, 0x00 }, /* REG_NCPCTRL  */
  39         { 0x06, 0x00 }, /* REG_LDOCTL   */
  40         { 0x07, 0x60 }, /* REG_HPPLLCTL */
  41         { 0x08, 0x00 }, /* REG_LPPLLCTL */
  42         { 0x09, 0x4A }, /* REG_LPPLLDIV */
  43         { 0x0A, 0x00 }, /* REG_AMICBCTL */
  44         { 0x0B, 0x00 }, /* REG_DMICBCTL */
  45         { 0x0C, 0x00 }, /* REG_MICLCTL  */
  46         { 0x0D, 0x00 }, /* REG_MICRCTL  */
  47         { 0x0E, 0x00 }, /* REG_MICGAIN  */
  48         { 0x0F, 0x1B }, /* REG_LINEGAIN */
  49         { 0x10, 0x00 }, /* REG_HSLCTL   */
  50         { 0x11, 0x00 }, /* REG_HSRCTL   */
  51         { 0x12, 0x00 }, /* REG_HSGAIN   */
  52         { 0x13, 0x00 }, /* REG_EARCTL   */
  53         { 0x14, 0x00 }, /* REG_HFLCTL   */
  54         { 0x15, 0x00 }, /* REG_HFLGAIN  */
  55         { 0x16, 0x00 }, /* REG_HFRCTL   */
  56         { 0x17, 0x00 }, /* REG_HFRGAIN  */
  57         { 0x18, 0x00 }, /* REG_VIBCTLL  */
  58         { 0x19, 0x00 }, /* REG_VIBDATL  */
  59         { 0x1A, 0x00 }, /* REG_VIBCTLR  */
  60         { 0x1B, 0x00 }, /* REG_VIBDATR  */
  61         { 0x1C, 0x00 }, /* REG_HKCTL1   */
  62         { 0x1D, 0x00 }, /* REG_HKCTL2   */
  63         { 0x1E, 0x00 }, /* REG_GPOCTL   */
  64         { 0x1F, 0x00 }, /* REG_ALB      */
  65         { 0x20, 0x00 }, /* REG_DLB      */
  66         /* 0x28, REG_TRIM1 */
  67         /* 0x29, REG_TRIM2 */
  68         /* 0x2A, REG_TRIM3 */
  69         /* 0x2B, REG_HSOTRIM */
  70         /* 0x2C, REG_HFOTRIM */
  71         { 0x2D, 0x08 }, /* REG_ACCCTL   */
  72         { 0x2E, 0x00 }, /* REG_STATUS   (ro) */
  73 };
  74
  75 static struct reg_sequence twl6040_patch[] = {
  76         /*
  77          * Select I2C bus access to dual access registers
  78          * Interrupt register is cleared on read
  79          * Select fast mode for i2c (400KHz)
  80          */
  81         { TWL6040_REG_ACCCTL,
  82                 TWL6040_I2CSEL | TWL6040_INTCLRMODE | TWL6040_I2CMODE(1) },
  83 };
  84
  85
  86 static bool twl6040_has_vibra(struct device_node *parent)
  87 {
  88         struct device_node *node;
  89
  90         node = of_get_child_by_name(parent, "vibra");
  91         if (node) {
  92                 of_node_put(node);
  93                 return true;
  94         }
  95
  96         return false;
  97 }
  98
  99 int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg)
 100 {
 101         int ret;
 102         unsigned int val;
 103
 104         ret = regmap_read(twl6040->regmap, reg, &val);
 105         if (ret < 0)
 106                 return ret;
 107
 108         return val;
 109 }
 110 EXPORT_SYMBOL(twl6040_reg_read);
 111
 112 int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg, u8 val)
 113 {
 114         int ret;
 115
 116         ret = regmap_write(twl6040->regmap, reg, val);
 117
 118         return ret;
 119 }
 120 EXPORT_SYMBOL(twl6040_reg_write);
 121
 122 int twl6040_set_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask)
 123 {
 124         return regmap_update_bits(twl6040->regmap, reg, mask, mask);
 125 }
 126 EXPORT_SYMBOL(twl6040_set_bits);
 127
 128 int twl6040_clear_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask)
 129 {
 130         return regmap_update_bits(twl6040->regmap, reg, mask, 0);
 131 }
 132 EXPORT_SYMBOL(twl6040_clear_bits);
 133
 134 /* twl6040 codec manual power-up sequence */
 135 static int twl6040_power_up_manual(struct twl6040 *twl6040)
 136 {
 137         u8 ldoctl, ncpctl, lppllctl;
 138         int ret;
 139
 140         /* enable high-side LDO, reference system and internal oscillator */
 141         ldoctl = TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA;
 142         ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
 143         if (ret)
 144                 return ret;
 145         usleep_range(10000, 10500);
 146
 147         /* enable negative charge pump */
 148         ncpctl = TWL6040_NCPENA;
 149         ret = twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
 150         if (ret)
 151                 goto ncp_err;
 152         usleep_range(1000, 1500);
 153
 154         /* enable low-side LDO */
 155         ldoctl |= TWL6040_LSLDOENA;
 156         ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
 157         if (ret)
 158                 goto lsldo_err;
 159         usleep_range(1000, 1500);
 160
 161         /* enable low-power PLL */
 162         lppllctl = TWL6040_LPLLENA;
 163         ret = twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
 164         if (ret)
 165                 goto lppll_err;
 166         usleep_range(5000, 5500);
 167
 168         /* disable internal oscillator */
 169         ldoctl &= ~TWL6040_OSCENA;
 170         ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
 171         if (ret)
 172                 goto osc_err;
 173
 174         return 0;
 175
 176 osc_err:
 177         lppllctl &= ~TWL6040_LPLLENA;
 178         twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
 179 lppll_err:
 180         ldoctl &= ~TWL6040_LSLDOENA;
 181         twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
 182 lsldo_err:
 183         ncpctl &= ~TWL6040_NCPENA;
 184         twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
 185 ncp_err:
 186         ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA);
 187         twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
 188
 189         dev_err(twl6040->dev, "manual power-up failed\n");
 190         return ret;
 191 }
 192
 193 /* twl6040 manual power-down sequence */
 194 static void twl6040_power_down_manual(struct twl6040 *twl6040)
 195 {
 196         u8 ncpctl, ldoctl, lppllctl;
 197
 198         ncpctl = twl6040_reg_read(twl6040, TWL6040_REG_NCPCTL);
 199         ldoctl = twl6040_reg_read(twl6040, TWL6040_REG_LDOCTL);
 200         lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL);
 201
 202         /* enable internal oscillator */
 203         ldoctl |= TWL6040_OSCENA;
 204         twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
 205         usleep_range(1000, 1500);
 206
 207         /* disable low-power PLL */
 208         lppllctl &= ~TWL6040_LPLLENA;
 209         twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
 210
 211         /* disable low-side LDO */
 212         ldoctl &= ~TWL6040_LSLDOENA;
 213         twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
 214
 215         /* disable negative charge pump */
 216         ncpctl &= ~TWL6040_NCPENA;
 217         twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
 218
 219         /* disable high-side LDO, reference system and internal oscillator */
 220         ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA);
 221         twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
 222 }
 223
 224 static irqreturn_t twl6040_readyint_handler(int irq, void *data)
 225 {
 226         struct twl6040 *twl6040 = data;
 227
 228         complete(&twl6040->ready);
 229
 230         return IRQ_HANDLED;
 231 }
 232
 233 static irqreturn_t twl6040_thint_handler(int irq, void *data)
 234 {
 235         struct twl6040 *twl6040 = data;
 236         u8 status;
 237
 238         status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS);
 239         if (status & TWL6040_TSHUTDET) {
 240                 dev_warn(twl6040->dev, "Thermal shutdown, powering-off");
 241                 twl6040_power(twl6040, 0);
 242         } else {
 243                 dev_warn(twl6040->dev, "Leaving thermal shutdown, powering-on");
 244                 twl6040_power(twl6040, 1);
 245         }
 246
 247         return IRQ_HANDLED;
 248 }
 249
 250 static int twl6040_power_up_automatic(struct twl6040 *twl6040)
 251 {
 252         int time_left;
 253
 254         gpio_set_value(twl6040->audpwron, 1);
 255
 256         time_left = wait_for_completion_timeout(&twl6040->ready,
 257                                                 msecs_to_jiffies(144));
 258         if (!time_left) {
 259                 u8 intid;
 260
 261                 dev_warn(twl6040->dev, "timeout waiting for READYINT\n");
 262                 intid = twl6040_reg_read(twl6040, TWL6040_REG_INTID);
 263                 if (!(intid & TWL6040_READYINT)) {
 264                         dev_err(twl6040->dev, "automatic power-up failed\n");
 265                         gpio_set_value(twl6040->audpwron, 0);
 266                         return -ETIMEDOUT;
 267                 }
 268         }
 269
 270         return 0;
 271 }
 272
 273 int twl6040_power(struct twl6040 *twl6040, int on)
 274 {
 275         int ret = 0;
 276
 277         mutex_lock(&twl6040->mutex);
 278
 279         if (on) {
 280                 /* already powered-up */
 281                 if (twl6040->power_count++)
 282                         goto out;
 283
 284                 ret = clk_prepare_enable(twl6040->clk32k);
 285                 if (ret) {
 286                         twl6040->power_count = 0;
 287                         goto out;
 288                 }
 289
 290                 /* Allow writes to the chip */
 291                 regcache_cache_only(twl6040->regmap, false);
 292
 293                 if (gpio_is_valid(twl6040->audpwron)) {
 294                         /* use automatic power-up sequence */
 295                         ret = twl6040_power_up_automatic(twl6040);
 296                         if (ret) {
 297                                 clk_disable_unprepare(twl6040->clk32k);
 298                                 twl6040->power_count = 0;
 299                                 goto out;
 300                         }
 301                 } else {
 302                         /* use manual power-up sequence */
 303                         ret = twl6040_power_up_manual(twl6040);
 304                         if (ret) {
 305                                 clk_disable_unprepare(twl6040->clk32k);
 306                                 twl6040->power_count = 0;
 307                                 goto out;
 308                         }
 309                 }
 310
 311                 /*
 312                  * Register access can produce errors after power-up unless we
 313                  * wait at least 8ms based on measurements on duovero.
 314                  */
 315                 usleep_range(10000, 12000);
 316
 317                 /* Sync with the HW */
 318                 ret = regcache_sync(twl6040->regmap);
 319                 if (ret) {
 320                         dev_err(twl6040->dev, "Failed to sync with the HW: %i\n",
 321                                 ret);
 322                         goto out;
 323                 }
 324
 325                 /* Default PLL configuration after power up */
 326                 twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL;
 327                 twl6040->sysclk_rate = 19200000;
 328         } else {
 329                 /* already powered-down */
 330                 if (!twl6040->power_count) {
 331                         dev_err(twl6040->dev,
 332                                 "device is already powered-off\n");
 333                         ret = -EPERM;
 334                         goto out;
 335                 }
 336
 337                 if (--twl6040->power_count)
 338                         goto out;
 339
 340                 if (gpio_is_valid(twl6040->audpwron)) {
 341                         /* use AUDPWRON line */
 342                         gpio_set_value(twl6040->audpwron, 0);
 343
 344                         /* power-down sequence latency */
 345                         usleep_range(500, 700);
 346                 } else {
 347                         /* use manual power-down sequence */
 348                         twl6040_power_down_manual(twl6040);
 349                 }
 350
 351                 /* Set regmap to cache only and mark it as dirty */
 352                 regcache_cache_only(twl6040->regmap, true);
 353                 regcache_mark_dirty(twl6040->regmap);
 354
 355                 twl6040->sysclk_rate = 0;
 356
 357                 if (twl6040->pll == TWL6040_SYSCLK_SEL_HPPLL) {
 358                         clk_disable_unprepare(twl6040->mclk);
 359                         twl6040->mclk_rate = 0;
 360                 }
 361
 362                 clk_disable_unprepare(twl6040->clk32k);
 363         }
 364
 365 out:
 366         mutex_unlock(&twl6040->mutex);
 367         return ret;
 368 }
 369 EXPORT_SYMBOL(twl6040_power);
 370
 371 int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
 372                     unsigned int freq_in, unsigned int freq_out)
 373 {
 374         u8 hppllctl, lppllctl;
 375         int ret = 0;
 376
 377         mutex_lock(&twl6040->mutex);
 378
 379         hppllctl = twl6040_reg_read(twl6040, TWL6040_REG_HPPLLCTL);
 380         lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL);
 381
 382         /* Force full reconfiguration when switching between PLL */
 383         if (pll_id != twl6040->pll) {
 384                 twl6040->sysclk_rate = 0;
 385                 twl6040->mclk_rate = 0;
 386         }
 387
 388         switch (pll_id) {
 389         case TWL6040_SYSCLK_SEL_LPPLL:
 390                 /* low-power PLL divider */
 391                 /* Change the sysclk configuration only if it has been canged */
 392                 if (twl6040->sysclk_rate != freq_out) {
 393                         switch (freq_out) {
 394                         case 17640000:
 395                                 lppllctl |= TWL6040_LPLLFIN;
 396                                 break;
 397                         case 19200000:
 398                                 lppllctl &= ~TWL6040_LPLLFIN;
 399                                 break;
 400                         default:
 401                                 dev_err(twl6040->dev,
 402                                         "freq_out %d not supported\n",
 403                                         freq_out);
 404                                 ret = -EINVAL;
 405                                 goto pll_out;
 406                         }
 407                         twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
 408                                           lppllctl);
 409                 }
 410
 411                 /* The PLL in use has not been change, we can exit */
 412                 if (twl6040->pll == pll_id)
 413                         break;
 414
 415                 switch (freq_in) {
 416                 case 32768:
 417                         lppllctl |= TWL6040_LPLLENA;
 418                         twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
 419                                           lppllctl);
 420                         mdelay(5);
 421                         lppllctl &= ~TWL6040_HPLLSEL;
 422                         twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
 423                                           lppllctl);
 424                         hppllctl &= ~TWL6040_HPLLENA;
 425                         twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL,
 426                                           hppllctl);
 427                         break;
 428                 default:
 429                         dev_err(twl6040->dev,
 430                                 "freq_in %d not supported\n", freq_in);
 431                         ret = -EINVAL;
 432                         goto pll_out;
 433                 }
 434
 435                 clk_disable_unprepare(twl6040->mclk);
 436                 break;
 437         case TWL6040_SYSCLK_SEL_HPPLL:
 438                 /* high-performance PLL can provide only 19.2 MHz */
 439                 if (freq_out != 19200000) {
 440                         dev_err(twl6040->dev,
 441                                 "freq_out %d not supported\n", freq_out);
 442                         ret = -EINVAL;
 443                         goto pll_out;
 444                 }
 445
 446                 if (twl6040->mclk_rate != freq_in) {
 447                         hppllctl &= ~TWL6040_MCLK_MSK;
 448
 449                         switch (freq_in) {
 450                         case 12000000:
 451                                 /* PLL enabled, active mode */
 452                                 hppllctl |= TWL6040_MCLK_12000KHZ |
 453                                             TWL6040_HPLLENA;
 454                                 break;
 455                         case 19200000:
 456                                 /* PLL enabled, bypass mode */
 457                                 hppllctl |= TWL6040_MCLK_19200KHZ |
 458                                             TWL6040_HPLLBP | TWL6040_HPLLENA;
 459                                 break;
 460                         case 26000000:
 461                                 /* PLL enabled, active mode */
 462                                 hppllctl |= TWL6040_MCLK_26000KHZ |
 463                                             TWL6040_HPLLENA;
 464                                 break;
 465                         case 38400000:
 466                                 /* PLL enabled, bypass mode */
 467                                 hppllctl |= TWL6040_MCLK_38400KHZ |
 468                                             TWL6040_HPLLBP | TWL6040_HPLLENA;
 469                                 break;
 470                         default:
 471                                 dev_err(twl6040->dev,
 472                                         "freq_in %d not supported\n", freq_in);
 473                                 ret = -EINVAL;
 474                                 goto pll_out;
 475                         }
 476
 477                         /* When switching to HPPLL, enable the mclk first */
 478                         if (pll_id != twl6040->pll)
 479                                 clk_prepare_enable(twl6040->mclk);
 480                         /*
 481                          * enable clock slicer to ensure input waveform is
 482                          * square
 483                          */
 484                         hppllctl |= TWL6040_HPLLSQRENA;
 485
 486                         twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL,
 487                                           hppllctl);
 488                         usleep_range(500, 700);
 489                         lppllctl |= TWL6040_HPLLSEL;
 490                         twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
 491                                           lppllctl);
 492                         lppllctl &= ~TWL6040_LPLLENA;
 493                         twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
 494                                           lppllctl);
 495
 496                         twl6040->mclk_rate = freq_in;
 497                 }
 498                 break;
 499         default:
 500                 dev_err(twl6040->dev, "unknown pll id %d\n", pll_id);
 501                 ret = -EINVAL;
 502                 goto pll_out;
 503         }
 504
 505         twl6040->sysclk_rate = freq_out;
 506         twl6040->pll = pll_id;
 507
 508 pll_out:
 509         mutex_unlock(&twl6040->mutex);
 510         return ret;
 511 }
 512 EXPORT_SYMBOL(twl6040_set_pll);
 513
 514 int twl6040_get_pll(struct twl6040 *twl6040)
 515 {
 516         if (twl6040->power_count)
 517                 return twl6040->pll;
 518         else
 519                 return -ENODEV;
 520 }
 521 EXPORT_SYMBOL(twl6040_get_pll);
 522
 523 unsigned int twl6040_get_sysclk(struct twl6040 *twl6040)
 524 {
 525         return twl6040->sysclk_rate;
 526 }
 527 EXPORT_SYMBOL(twl6040_get_sysclk);
 528
 529 /* Get the combined status of the vibra control register */
 530 int twl6040_get_vibralr_status(struct twl6040 *twl6040)
 531 {
 532         unsigned int reg;
 533         int ret;
 534         u8 status;
 535
 536         ret = regmap_read(twl6040->regmap, TWL6040_REG_VIBCTLL, &reg);
 537         if (ret != 0)
 538                 return ret;
 539         status = reg;
 540
 541         ret = regmap_read(twl6040->regmap, TWL6040_REG_VIBCTLR, &reg);
 542         if (ret != 0)
 543                 return ret;
 544         status |= reg;
 545
 546         status &= (TWL6040_VIBENA | TWL6040_VIBSEL);
 547
 548         return status;
 549 }
 550 EXPORT_SYMBOL(twl6040_get_vibralr_status);
 551
 552 static struct resource twl6040_vibra_rsrc[] = {
 553         {
 554                 .flags = IORESOURCE_IRQ,
 555         },
 556 };
 557
 558 static struct resource twl6040_codec_rsrc[] = {
 559         {
 560                 .flags = IORESOURCE_IRQ,
 561         },
 562 };
 563
 564 static bool twl6040_readable_reg(struct device *dev, unsigned int reg)
 565 {
 566         /* Register 0 is not readable */
 567         if (!reg)
 568                 return false;
 569         return true;
 570 }
 571
 572 static bool twl6040_volatile_reg(struct device *dev, unsigned int reg)
 573 {
 574         switch (reg) {
 575         case TWL6040_REG_ASICID:
 576         case TWL6040_REG_ASICREV:
 577         case TWL6040_REG_INTID:
 578         case TWL6040_REG_LPPLLCTL:
 579         case TWL6040_REG_HPPLLCTL:
 580         case TWL6040_REG_STATUS:
 581                 return true;
 582         default:
 583                 return false;
 584         }
 585 }
 586
 587 static bool twl6040_writeable_reg(struct device *dev, unsigned int reg)
 588 {
 589         switch (reg) {
 590         case TWL6040_REG_ASICID:
 591         case TWL6040_REG_ASICREV:
 592         case TWL6040_REG_STATUS:
 593                 return false;
 594         default:
 595                 return true;
 596         }
 597 }
 598
 599 static const struct regmap_config twl6040_regmap_config = {
 600         .reg_bits = 8,
 601         .val_bits = 8,
 602
 603         .reg_defaults = twl6040_defaults,
 604         .num_reg_defaults = ARRAY_SIZE(twl6040_defaults),
 605
 606         .max_register = TWL6040_REG_STATUS, /* 0x2e */
 607
 608         .readable_reg = twl6040_readable_reg,
 609         .volatile_reg = twl6040_volatile_reg,
 610         .writeable_reg = twl6040_writeable_reg,
 611
 612         .cache_type = REGCACHE_RBTREE,
 613         .use_single_read = true,
 614         .use_single_write = true,
 615 };
 616
 617 static const struct regmap_irq twl6040_irqs[] = {
 618         { .reg_offset = 0, .mask = TWL6040_THINT, },
 619         { .reg_offset = 0, .mask = TWL6040_PLUGINT | TWL6040_UNPLUGINT, },
 620         { .reg_offset = 0, .mask = TWL6040_HOOKINT, },
 621         { .reg_offset = 0, .mask = TWL6040_HFINT, },
 622         { .reg_offset = 0, .mask = TWL6040_VIBINT, },
 623         { .reg_offset = 0, .mask = TWL6040_READYINT, },
 624 };
 625
 626 static struct regmap_irq_chip twl6040_irq_chip = {
 627         .name = "twl6040",
 628         .irqs = twl6040_irqs,
 629         .num_irqs = ARRAY_SIZE(twl6040_irqs),
 630
 631         .num_regs = 1,
 632         .status_base = TWL6040_REG_INTID,
 633         .mask_base = TWL6040_REG_INTMR,
 634 };
 635
 636 static int twl6040_probe(struct i2c_client *client,
 637                          const struct i2c_device_id *id)
 638 {
 639         struct device_node *node = client->dev.of_node;
 640         struct twl6040 *twl6040;
 641         struct mfd_cell *cell = NULL;
 642         int irq, ret, children = 0;
 643
 644         if (!node) {
 645                 dev_err(&client->dev, "of node is missing\n");
 646                 return -EINVAL;
 647         }
 648
 649         /* In order to operate correctly we need valid interrupt config */
 650         if (!client->irq) {
 651                 dev_err(&client->dev, "Invalid IRQ configuration\n");
 652                 return -EINVAL;
 653         }
 654
 655         twl6040 = devm_kzalloc(&client->dev, sizeof(struct twl6040),
 656                                GFP_KERNEL);
 657         if (!twl6040)
 658                 return -ENOMEM;
 659
 660         twl6040->regmap = devm_regmap_init_i2c(client, &twl6040_regmap_config);
 661         if (IS_ERR(twl6040->regmap))
 662                 return PTR_ERR(twl6040->regmap);
 663
 664         i2c_set_clientdata(client, twl6040);
 665
 666         twl6040->clk32k = devm_clk_get(&client->dev, "clk32k");
 667         if (IS_ERR(twl6040->clk32k)) {
 668                 if (PTR_ERR(twl6040->clk32k) == -EPROBE_DEFER)
 669                         return -EPROBE_DEFER;
 670                 dev_dbg(&client->dev, "clk32k is not handled\n");
 671                 twl6040->clk32k = NULL;
 672         }
 673
 674         twl6040->mclk = devm_clk_get(&client->dev, "mclk");
 675         if (IS_ERR(twl6040->mclk)) {
 676                 if (PTR_ERR(twl6040->mclk) == -EPROBE_DEFER)
 677                         return -EPROBE_DEFER;
 678                 dev_dbg(&client->dev, "mclk is not handled\n");
 679                 twl6040->mclk = NULL;
 680         }
 681
 682         twl6040->supplies[0].supply = "vio";
 683         twl6040->supplies[1].supply = "v2v1";
 684         ret = devm_regulator_bulk_get(&client->dev, TWL6040_NUM_SUPPLIES,
 685                                       twl6040->supplies);
 686         if (ret != 0) {
 687                 dev_err(&client->dev, "Failed to get supplies: %d\n", ret);
 688                 return ret;
 689         }
 690
 691         ret = regulator_bulk_enable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
 692         if (ret != 0) {
 693                 dev_err(&client->dev, "Failed to enable supplies: %d\n", ret);
 694                 return ret;
 695         }
 696
 697         twl6040->dev = &client->dev;
 698         twl6040->irq = client->irq;
 699
 700         mutex_init(&twl6040->mutex);
 701         init_completion(&twl6040->ready);
 702
 703         regmap_register_patch(twl6040->regmap, twl6040_patch,
 704                               ARRAY_SIZE(twl6040_patch));
 705
 706         twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV);
 707         if (twl6040->rev < 0) {
 708                 dev_err(&client->dev, "Failed to read revision register: %d\n",
 709                         twl6040->rev);
 710                 ret = twl6040->rev;
 711                 goto gpio_err;
 712         }
 713
 714         /* ERRATA: Automatic power-up is not possible in ES1.0 */
 715         if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0)
 716                 twl6040->audpwron = of_get_named_gpio(node,
 717                                                       "ti,audpwron-gpio", 0);
 718         else
 719                 twl6040->audpwron = -EINVAL;
 720
 721         if (gpio_is_valid(twl6040->audpwron)) {
 722                 ret = devm_gpio_request_one(&client->dev, twl6040->audpwron,
 723                                             GPIOF_OUT_INIT_LOW, "audpwron");
 724                 if (ret)
 725                         goto gpio_err;
 726
 727                 /* Clear any pending interrupt */
 728                 twl6040_reg_read(twl6040, TWL6040_REG_INTID);
 729         }
 730
 731         ret = regmap_add_irq_chip(twl6040->regmap, twl6040->irq, IRQF_ONESHOT,
 732                                   0, &twl6040_irq_chip, &twl6040->irq_data);
 733         if (ret < 0)
 734                 goto gpio_err;
 735
 736         twl6040->irq_ready = regmap_irq_get_virq(twl6040->irq_data,
 737                                                  TWL6040_IRQ_READY);
 738         twl6040->irq_th = regmap_irq_get_virq(twl6040->irq_data,
 739                                               TWL6040_IRQ_TH);
 740
 741         ret = devm_request_threaded_irq(twl6040->dev, twl6040->irq_ready, NULL,
 742                                         twl6040_readyint_handler, IRQF_ONESHOT,
 743                                         "twl6040_irq_ready", twl6040);
 744         if (ret) {
 745                 dev_err(twl6040->dev, "READY IRQ request failed: %d\n", ret);
 746                 goto readyirq_err;
 747         }
 748
 749         ret = devm_request_threaded_irq(twl6040->dev, twl6040->irq_th, NULL,
 750                                         twl6040_thint_handler, IRQF_ONESHOT,
 751                                         "twl6040_irq_th", twl6040);
 752         if (ret) {
 753                 dev_err(twl6040->dev, "Thermal IRQ request failed: %d\n", ret);
 754                 goto readyirq_err;
 755         }
 756
 757         /*
 758          * The main functionality of twl6040 to provide audio on OMAP4+ systems.
 759          * We can add the ASoC codec child whenever this driver has been loaded.
 760          */
 761         irq = regmap_irq_get_virq(twl6040->irq_data, TWL6040_IRQ_PLUG);
 762         cell = &twl6040->cells[children];
 763         cell->name = "twl6040-codec";
 764         twl6040_codec_rsrc[0].start = irq;
 765         twl6040_codec_rsrc[0].end = irq;
 766         cell->resources = twl6040_codec_rsrc;
 767         cell->num_resources = ARRAY_SIZE(twl6040_codec_rsrc);
 768         children++;
 769
 770         /* Vibra input driver support */
 771         if (twl6040_has_vibra(node)) {
 772                 irq = regmap_irq_get_virq(twl6040->irq_data, TWL6040_IRQ_VIB);
 773
 774                 cell = &twl6040->cells[children];
 775                 cell->name = "twl6040-vibra";
 776                 twl6040_vibra_rsrc[0].start = irq;
 777                 twl6040_vibra_rsrc[0].end = irq;
 778                 cell->resources = twl6040_vibra_rsrc;
 779                 cell->num_resources = ARRAY_SIZE(twl6040_vibra_rsrc);
 780                 children++;
 781         }
 782
 783         /* GPO support */
 784         cell = &twl6040->cells[children];
 785         cell->name = "twl6040-gpo";
 786         children++;
 787
 788         /* PDM clock support  */
 789         cell = &twl6040->cells[children];
 790         cell->name = "twl6040-pdmclk";
 791         children++;
 792
 793         /* The chip is powered down so mark regmap to cache only and dirty */
 794         regcache_cache_only(twl6040->regmap, true);
 795         regcache_mark_dirty(twl6040->regmap);
 796
 797         ret = mfd_add_devices(&client->dev, -1, twl6040->cells, children,
 798                               NULL, 0, NULL);
 799         if (ret)
 800                 goto readyirq_err;
 801
 802         return 0;
 803
 804 readyirq_err:
 805         regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
 806 gpio_err:
 807         regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
 808         return ret;
 809 }
 810
 811 static int twl6040_remove(struct i2c_client *client)
 812 {
 813         struct twl6040 *twl6040 = i2c_get_clientdata(client);
 814
 815         if (twl6040->power_count)
 816                 twl6040_power(twl6040, 0);
 817
 818         regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
 819
 820         mfd_remove_devices(&client->dev);
 821
 822         regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
 823
 824         return 0;
 825 }
 826
 827 static const struct i2c_device_id twl6040_i2c_id[] = {
 828         { "twl6040", 0, },
 829         { "twl6041", 0, },
 830         { },
 831 };
 832 MODULE_DEVICE_TABLE(i2c, twl6040_i2c_id);
 833
 834 static struct i2c_driver twl6040_driver = {
 835         .driver = {
 836                 .name = "twl6040",
 837         },
 838         .probe          = twl6040_probe,
 839         .remove         = twl6040_remove,
 840         .id_table       = twl6040_i2c_id,
 841 };
 842
 843 module_i2c_driver(twl6040_driver);
 844
 845 MODULE_DESCRIPTION("TWL6040 MFD");
 846 MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>");
 847 MODULE_AUTHOR("Jorge Eduardo Candelaria <jorge.candelaria@ti.com>");
 848 MODULE_LICENSE("GPL");