1 // SPDX-License-Identifier: GPL-2.0
2 // Copyright (C) 2018 Microchip Technology
4 #include <linux/kernel.h>
5 #include <linux/module.h>
6 #include <linux/delay.h>
10 /* External Register Control Register */
11 #define LAN87XX_EXT_REG_CTL (0x14)
12 #define LAN87XX_EXT_REG_CTL_RD_CTL (0x1000)
13 #define LAN87XX_EXT_REG_CTL_WR_CTL (0x0800)
15 /* External Register Read Data Register */
16 #define LAN87XX_EXT_REG_RD_DATA (0x15)
18 /* External Register Write Data Register */
19 #define LAN87XX_EXT_REG_WR_DATA (0x16)
21 /* Interrupt Source Register */
22 #define LAN87XX_INTERRUPT_SOURCE (0x18)
24 /* Interrupt Mask Register */
25 #define LAN87XX_INTERRUPT_MASK (0x19)
26 #define LAN87XX_MASK_LINK_UP (0x0004)
27 #define LAN87XX_MASK_LINK_DOWN (0x0002)
29 /* phyaccess nested types */
30 #define PHYACC_ATTR_MODE_READ 0
31 #define PHYACC_ATTR_MODE_WRITE 1
32 #define PHYACC_ATTR_MODE_MODIFY 2
34 #define PHYACC_ATTR_BANK_SMI 0
35 #define PHYACC_ATTR_BANK_MISC 1
36 #define PHYACC_ATTR_BANK_PCS 2
37 #define PHYACC_ATTR_BANK_AFE 3
38 #define PHYACC_ATTR_BANK_MAX 7
40 #define DRIVER_AUTHOR "Nisar Sayed <nisar.sayed@microchip.com>"
41 #define DRIVER_DESC "Microchip LAN87XX T1 PHY driver"
43 struct access_ereg_val
{
51 static int access_ereg(struct phy_device
*phydev
, u8 mode
, u8 bank
,
57 if (mode
> PHYACC_ATTR_MODE_WRITE
|| bank
> PHYACC_ATTR_BANK_MAX
)
60 if (bank
== PHYACC_ATTR_BANK_SMI
) {
61 if (mode
== PHYACC_ATTR_MODE_WRITE
)
62 rc
= phy_write(phydev
, offset
, val
);
64 rc
= phy_read(phydev
, offset
);
68 if (mode
== PHYACC_ATTR_MODE_WRITE
) {
69 ereg
= LAN87XX_EXT_REG_CTL_WR_CTL
;
70 rc
= phy_write(phydev
, LAN87XX_EXT_REG_WR_DATA
, val
);
74 ereg
= LAN87XX_EXT_REG_CTL_RD_CTL
;
77 ereg
|= (bank
<< 8) | offset
;
79 rc
= phy_write(phydev
, LAN87XX_EXT_REG_CTL
, ereg
);
83 if (mode
== PHYACC_ATTR_MODE_READ
)
84 rc
= phy_read(phydev
, LAN87XX_EXT_REG_RD_DATA
);
89 static int access_ereg_modify_changed(struct phy_device
*phydev
,
90 u8 bank
, u8 offset
, u16 val
, u16 mask
)
94 if (bank
> PHYACC_ATTR_BANK_MAX
)
97 rc
= access_ereg(phydev
, PHYACC_ATTR_MODE_READ
, bank
, offset
, val
);
101 new = val
| (rc
& (mask
^ 0xFFFF));
102 rc
= access_ereg(phydev
, PHYACC_ATTR_MODE_WRITE
, bank
, offset
, new);
107 static int lan87xx_phy_init(struct phy_device
*phydev
)
109 static const struct access_ereg_val init
[] = {
110 /* TX Amplitude = 5 */
111 {PHYACC_ATTR_MODE_MODIFY
, PHYACC_ATTR_BANK_AFE
, 0x0B,
113 /* Clear SMI interrupts */
114 {PHYACC_ATTR_MODE_READ
, PHYACC_ATTR_BANK_SMI
, 0x18,
116 /* Clear MISC interrupts */
117 {PHYACC_ATTR_MODE_READ
, PHYACC_ATTR_BANK_MISC
, 0x08,
119 /* Turn on TC10 Ring Oscillator (ROSC) */
120 {PHYACC_ATTR_MODE_MODIFY
, PHYACC_ATTR_BANK_MISC
, 0x20,
122 /* WUR Detect Length to 1.2uS, LPC Detect Length to 1.09uS */
123 {PHYACC_ATTR_MODE_WRITE
, PHYACC_ATTR_BANK_PCS
, 0x20,
125 /* Wake_In Debounce Length to 39uS, Wake_Out Length to 79uS */
126 {PHYACC_ATTR_MODE_WRITE
, PHYACC_ATTR_BANK_MISC
, 0x21,
128 /* Enable Auto Wake Forward to Wake_Out, ROSC on, Sleep,
129 * and Wake_In to wake PHY
131 {PHYACC_ATTR_MODE_WRITE
, PHYACC_ATTR_BANK_MISC
, 0x20,
133 /* Enable WUP Auto Fwd, Enable Wake on MDI, Wakeup Debouncer
136 {PHYACC_ATTR_MODE_WRITE
, PHYACC_ATTR_BANK_MISC
, 0x24,
139 {PHYACC_ATTR_MODE_MODIFY
, PHYACC_ATTR_BANK_SMI
, 0x1A,
144 /* Start manual initialization procedures in Managed Mode */
145 rc
= access_ereg_modify_changed(phydev
, PHYACC_ATTR_BANK_SMI
,
146 0x1a, 0x0000, 0x0100);
150 /* Soft Reset the SMI block */
151 rc
= access_ereg_modify_changed(phydev
, PHYACC_ATTR_BANK_SMI
,
152 0x00, 0x8000, 0x8000);
156 /* Check to see if the self-clearing bit is cleared */
157 usleep_range(1000, 2000);
158 rc
= access_ereg(phydev
, PHYACC_ATTR_MODE_READ
,
159 PHYACC_ATTR_BANK_SMI
, 0x00, 0);
162 if ((rc
& 0x8000) != 0)
165 /* PHY Initialization */
166 for (i
= 0; i
< ARRAY_SIZE(init
); i
++) {
167 if (init
[i
].mode
== PHYACC_ATTR_MODE_MODIFY
) {
168 rc
= access_ereg_modify_changed(phydev
, init
[i
].bank
,
173 rc
= access_ereg(phydev
, init
[i
].mode
, init
[i
].bank
,
174 init
[i
].offset
, init
[i
].val
);
183 static int lan87xx_phy_config_intr(struct phy_device
*phydev
)
187 if (phydev
->interrupts
== PHY_INTERRUPT_ENABLED
) {
188 /* unmask all source and clear them before enable */
189 rc
= phy_write(phydev
, LAN87XX_INTERRUPT_MASK
, 0x7FFF);
190 rc
= phy_read(phydev
, LAN87XX_INTERRUPT_SOURCE
);
191 val
= LAN87XX_MASK_LINK_UP
| LAN87XX_MASK_LINK_DOWN
;
192 rc
= phy_write(phydev
, LAN87XX_INTERRUPT_MASK
, val
);
194 rc
= phy_write(phydev
, LAN87XX_INTERRUPT_MASK
, val
);
198 rc
= phy_read(phydev
, LAN87XX_INTERRUPT_SOURCE
);
201 return rc
< 0 ? rc
: 0;
204 static irqreturn_t
lan87xx_handle_interrupt(struct phy_device
*phydev
)
208 irq_status
= phy_read(phydev
, LAN87XX_INTERRUPT_SOURCE
);
209 if (irq_status
< 0) {
217 phy_trigger_machine(phydev
);
222 static int lan87xx_config_init(struct phy_device
*phydev
)
224 int rc
= lan87xx_phy_init(phydev
);
226 return rc
< 0 ? rc
: 0;
229 static struct phy_driver microchip_t1_phy_driver
[] = {
231 .phy_id
= 0x0007c150,
232 .phy_id_mask
= 0xfffffff0,
233 .name
= "Microchip LAN87xx T1",
235 .features
= PHY_BASIC_T1_FEATURES
,
237 .config_init
= lan87xx_config_init
,
239 .config_intr
= lan87xx_phy_config_intr
,
240 .handle_interrupt
= lan87xx_handle_interrupt
,
242 .suspend
= genphy_suspend
,
243 .resume
= genphy_resume
,
247 module_phy_driver(microchip_t1_phy_driver
);
249 static struct mdio_device_id __maybe_unused microchip_t1_tbl
[] = {
250 { 0x0007c150, 0xfffffff0 },
254 MODULE_DEVICE_TABLE(mdio
, microchip_t1_tbl
);
256 MODULE_AUTHOR(DRIVER_AUTHOR
);
257 MODULE_DESCRIPTION(DRIVER_DESC
);
258 MODULE_LICENSE("GPL");