1 // SPDX-License-Identifier: GPL-2.0
3 * Meson G12A USB2 PHY driver
5 * Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
6 * Copyright (C) 2017 Amlogic, Inc. All rights reserved
7 * Copyright (C) 2019 BayLibre, SAS
8 * Author: Neil Armstrong <narmstrong@baylibre.com>
11 #include <linux/bitfield.h>
12 #include <linux/bitops.h>
13 #include <linux/clk.h>
14 #include <linux/delay.h>
16 #include <linux/module.h>
17 #include <linux/of_device.h>
18 #include <linux/regmap.h>
19 #include <linux/reset.h>
20 #include <linux/phy/phy.h>
21 #include <linux/platform_device.h>
23 #define PHY_CTRL_R0 0x0
24 #define PHY_CTRL_R1 0x4
25 #define PHY_CTRL_R2 0x8
26 #define PHY_CTRL_R3 0xc
27 #define PHY_CTRL_R3_SQUELCH_REF GENMASK(1, 0)
28 #define PHY_CTRL_R3_HSDIC_REF GENMASK(3, 2)
29 #define PHY_CTRL_R3_DISC_THRESH GENMASK(7, 4)
31 #define PHY_CTRL_R4 0x10
32 #define PHY_CTRL_R4_CALIB_CODE_7_0 GENMASK(7, 0)
33 #define PHY_CTRL_R4_CALIB_CODE_15_8 GENMASK(15, 8)
34 #define PHY_CTRL_R4_CALIB_CODE_23_16 GENMASK(23, 16)
35 #define PHY_CTRL_R4_I_C2L_CAL_EN BIT(24)
36 #define PHY_CTRL_R4_I_C2L_CAL_RESET_N BIT(25)
37 #define PHY_CTRL_R4_I_C2L_CAL_DONE BIT(26)
38 #define PHY_CTRL_R4_TEST_BYPASS_MODE_EN BIT(27)
39 #define PHY_CTRL_R4_I_C2L_BIAS_TRIM_1_0 GENMASK(29, 28)
40 #define PHY_CTRL_R4_I_C2L_BIAS_TRIM_3_2 GENMASK(31, 30)
42 #define PHY_CTRL_R5 0x14
43 #define PHY_CTRL_R6 0x18
44 #define PHY_CTRL_R7 0x1c
45 #define PHY_CTRL_R8 0x20
46 #define PHY_CTRL_R9 0x24
47 #define PHY_CTRL_R10 0x28
48 #define PHY_CTRL_R11 0x2c
49 #define PHY_CTRL_R12 0x30
50 #define PHY_CTRL_R13 0x34
51 #define PHY_CTRL_R13_CUSTOM_PATTERN_19 GENMASK(7, 0)
52 #define PHY_CTRL_R13_LOAD_STAT BIT(14)
53 #define PHY_CTRL_R13_UPDATE_PMA_SIGNALS BIT(15)
54 #define PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET GENMASK(20, 16)
55 #define PHY_CTRL_R13_CLEAR_HOLD_HS_DISCONNECT BIT(21)
56 #define PHY_CTRL_R13_BYPASS_HOST_DISCONNECT_VAL BIT(22)
57 #define PHY_CTRL_R13_BYPASS_HOST_DISCONNECT_EN BIT(23)
58 #define PHY_CTRL_R13_I_C2L_HS_EN BIT(24)
59 #define PHY_CTRL_R13_I_C2L_FS_EN BIT(25)
60 #define PHY_CTRL_R13_I_C2L_LS_EN BIT(26)
61 #define PHY_CTRL_R13_I_C2L_HS_OE BIT(27)
62 #define PHY_CTRL_R13_I_C2L_FS_OE BIT(28)
63 #define PHY_CTRL_R13_I_C2L_HS_RX_EN BIT(29)
64 #define PHY_CTRL_R13_I_C2L_FSLS_RX_EN BIT(30)
66 #define PHY_CTRL_R14 0x38
67 #define PHY_CTRL_R14_I_RDP_EN BIT(0)
68 #define PHY_CTRL_R14_I_RPU_SW1_EN BIT(1)
69 #define PHY_CTRL_R14_I_RPU_SW2_EN GENMASK(3, 2)
70 #define PHY_CTRL_R14_PG_RSTN BIT(4)
71 #define PHY_CTRL_R14_I_C2L_DATA_16_8 BIT(5)
72 #define PHY_CTRL_R14_I_C2L_ASSERT_SINGLE_EN_ZERO BIT(6)
73 #define PHY_CTRL_R14_BYPASS_CTRL_7_0 GENMASK(15, 8)
74 #define PHY_CTRL_R14_BYPASS_CTRL_15_8 GENMASK(23, 16)
76 #define PHY_CTRL_R15 0x3c
77 #define PHY_CTRL_R16 0x40
78 #define PHY_CTRL_R16_MPLL_M GENMASK(8, 0)
79 #define PHY_CTRL_R16_MPLL_N GENMASK(14, 10)
80 #define PHY_CTRL_R16_MPLL_TDC_MODE BIT(20)
81 #define PHY_CTRL_R16_MPLL_SDM_EN BIT(21)
82 #define PHY_CTRL_R16_MPLL_LOAD BIT(22)
83 #define PHY_CTRL_R16_MPLL_DCO_SDM_EN BIT(23)
84 #define PHY_CTRL_R16_MPLL_LOCK_LONG GENMASK(25, 24)
85 #define PHY_CTRL_R16_MPLL_LOCK_F BIT(26)
86 #define PHY_CTRL_R16_MPLL_FAST_LOCK BIT(27)
87 #define PHY_CTRL_R16_MPLL_EN BIT(28)
88 #define PHY_CTRL_R16_MPLL_RESET BIT(29)
89 #define PHY_CTRL_R16_MPLL_LOCK BIT(30)
90 #define PHY_CTRL_R16_MPLL_LOCK_DIG BIT(31)
92 #define PHY_CTRL_R17 0x44
93 #define PHY_CTRL_R17_MPLL_FRAC_IN GENMASK(13, 0)
94 #define PHY_CTRL_R17_MPLL_FIX_EN BIT(16)
95 #define PHY_CTRL_R17_MPLL_LAMBDA1 GENMASK(19, 17)
96 #define PHY_CTRL_R17_MPLL_LAMBDA0 GENMASK(22, 20)
97 #define PHY_CTRL_R17_MPLL_FILTER_MODE BIT(23)
98 #define PHY_CTRL_R17_MPLL_FILTER_PVT2 GENMASK(27, 24)
99 #define PHY_CTRL_R17_MPLL_FILTER_PVT1 GENMASK(31, 28)
101 #define PHY_CTRL_R18 0x48
102 #define PHY_CTRL_R18_MPLL_LKW_SEL GENMASK(1, 0)
103 #define PHY_CTRL_R18_MPLL_LK_W GENMASK(5, 2)
104 #define PHY_CTRL_R18_MPLL_LK_S GENMASK(11, 6)
105 #define PHY_CTRL_R18_MPLL_DCO_M_EN BIT(12)
106 #define PHY_CTRL_R18_MPLL_DCO_CLK_SEL BIT(13)
107 #define PHY_CTRL_R18_MPLL_PFD_GAIN GENMASK(15, 14)
108 #define PHY_CTRL_R18_MPLL_ROU GENMASK(18, 16)
109 #define PHY_CTRL_R18_MPLL_DATA_SEL GENMASK(21, 19)
110 #define PHY_CTRL_R18_MPLL_BIAS_ADJ GENMASK(23, 22)
111 #define PHY_CTRL_R18_MPLL_BB_MODE GENMASK(25, 24)
112 #define PHY_CTRL_R18_MPLL_ALPHA GENMASK(28, 26)
113 #define PHY_CTRL_R18_MPLL_ADJ_LDO GENMASK(30, 29)
114 #define PHY_CTRL_R18_MPLL_ACG_RANGE BIT(31)
116 #define PHY_CTRL_R19 0x4c
117 #define PHY_CTRL_R20 0x50
118 #define PHY_CTRL_R20_USB2_IDDET_EN BIT(0)
119 #define PHY_CTRL_R20_USB2_OTG_VBUS_TRIM_2_0 GENMASK(3, 1)
120 #define PHY_CTRL_R20_USB2_OTG_VBUSDET_EN BIT(4)
121 #define PHY_CTRL_R20_USB2_AMON_EN BIT(5)
122 #define PHY_CTRL_R20_USB2_CAL_CODE_R5 BIT(6)
123 #define PHY_CTRL_R20_BYPASS_OTG_DET BIT(7)
124 #define PHY_CTRL_R20_USB2_DMON_EN BIT(8)
125 #define PHY_CTRL_R20_USB2_DMON_SEL_3_0 GENMASK(12, 9)
126 #define PHY_CTRL_R20_USB2_EDGE_DRV_EN BIT(13)
127 #define PHY_CTRL_R20_USB2_EDGE_DRV_TRIM_1_0 GENMASK(15, 14)
128 #define PHY_CTRL_R20_USB2_BGR_ADJ_4_0 GENMASK(20, 16)
129 #define PHY_CTRL_R20_USB2_BGR_START BIT(21)
130 #define PHY_CTRL_R20_USB2_BGR_VREF_4_0 GENMASK(28, 24)
131 #define PHY_CTRL_R20_USB2_BGR_DBG_1_0 GENMASK(30, 29)
132 #define PHY_CTRL_R20_BYPASS_CAL_DONE_R5 BIT(31)
134 #define PHY_CTRL_R21 0x54
135 #define PHY_CTRL_R21_USB2_BGR_FORCE BIT(0)
136 #define PHY_CTRL_R21_USB2_CAL_ACK_EN BIT(1)
137 #define PHY_CTRL_R21_USB2_OTG_ACA_EN BIT(2)
138 #define PHY_CTRL_R21_USB2_TX_STRG_PD BIT(3)
139 #define PHY_CTRL_R21_USB2_OTG_ACA_TRIM_1_0 GENMASK(5, 4)
140 #define PHY_CTRL_R21_BYPASS_UTMI_CNTR GENMASK(15, 6)
141 #define PHY_CTRL_R21_BYPASS_UTMI_REG GENMASK(25, 20)
143 #define PHY_CTRL_R22 0x58
144 #define PHY_CTRL_R23 0x5c
146 #define RESET_COMPLETE_TIME 1000
147 #define PLL_RESET_COMPLETE_TIME 100
154 struct phy_meson_g12a_usb2_priv
{
156 struct regmap
*regmap
;
158 struct reset_control
*reset
;
162 static const struct regmap_config phy_meson_g12a_usb2_regmap_conf
= {
166 .max_register
= PHY_CTRL_R23
,
169 static int phy_meson_g12a_usb2_init(struct phy
*phy
)
171 struct phy_meson_g12a_usb2_priv
*priv
= phy_get_drvdata(phy
);
175 ret
= reset_control_reset(priv
->reset
);
179 udelay(RESET_COMPLETE_TIME
);
181 /* usb2_otg_aca_en == 0 */
182 regmap_update_bits(priv
->regmap
, PHY_CTRL_R21
,
183 PHY_CTRL_R21_USB2_OTG_ACA_EN
, 0);
185 /* PLL Setup : 24MHz * 20 / 1 = 480MHz */
186 regmap_write(priv
->regmap
, PHY_CTRL_R16
,
187 FIELD_PREP(PHY_CTRL_R16_MPLL_M
, 20) |
188 FIELD_PREP(PHY_CTRL_R16_MPLL_N
, 1) |
189 PHY_CTRL_R16_MPLL_LOAD
|
190 FIELD_PREP(PHY_CTRL_R16_MPLL_LOCK_LONG
, 1) |
191 PHY_CTRL_R16_MPLL_FAST_LOCK
|
192 PHY_CTRL_R16_MPLL_EN
|
193 PHY_CTRL_R16_MPLL_RESET
);
195 regmap_write(priv
->regmap
, PHY_CTRL_R17
,
196 FIELD_PREP(PHY_CTRL_R17_MPLL_FRAC_IN
, 0) |
197 FIELD_PREP(PHY_CTRL_R17_MPLL_LAMBDA1
, 7) |
198 FIELD_PREP(PHY_CTRL_R17_MPLL_LAMBDA0
, 7) |
199 FIELD_PREP(PHY_CTRL_R17_MPLL_FILTER_PVT2
, 2) |
200 FIELD_PREP(PHY_CTRL_R17_MPLL_FILTER_PVT1
, 9));
202 value
= FIELD_PREP(PHY_CTRL_R18_MPLL_LKW_SEL
, 1) |
203 FIELD_PREP(PHY_CTRL_R18_MPLL_LK_W
, 9) |
204 FIELD_PREP(PHY_CTRL_R18_MPLL_LK_S
, 0x27) |
205 FIELD_PREP(PHY_CTRL_R18_MPLL_PFD_GAIN
, 1) |
206 FIELD_PREP(PHY_CTRL_R18_MPLL_ROU
, 7) |
207 FIELD_PREP(PHY_CTRL_R18_MPLL_DATA_SEL
, 3) |
208 FIELD_PREP(PHY_CTRL_R18_MPLL_BIAS_ADJ
, 1) |
209 FIELD_PREP(PHY_CTRL_R18_MPLL_BB_MODE
, 0) |
210 FIELD_PREP(PHY_CTRL_R18_MPLL_ALPHA
, 3) |
211 FIELD_PREP(PHY_CTRL_R18_MPLL_ADJ_LDO
, 1) |
212 PHY_CTRL_R18_MPLL_ACG_RANGE
;
214 if (priv
->soc_id
== MESON_SOC_A1
)
215 value
|= PHY_CTRL_R18_MPLL_DCO_CLK_SEL
;
217 regmap_write(priv
->regmap
, PHY_CTRL_R18
, value
);
219 udelay(PLL_RESET_COMPLETE_TIME
);
222 regmap_write(priv
->regmap
, PHY_CTRL_R16
,
223 FIELD_PREP(PHY_CTRL_R16_MPLL_M
, 20) |
224 FIELD_PREP(PHY_CTRL_R16_MPLL_N
, 1) |
225 PHY_CTRL_R16_MPLL_LOAD
|
226 FIELD_PREP(PHY_CTRL_R16_MPLL_LOCK_LONG
, 1) |
227 PHY_CTRL_R16_MPLL_FAST_LOCK
|
228 PHY_CTRL_R16_MPLL_EN
);
231 regmap_write(priv
->regmap
, PHY_CTRL_R20
,
232 FIELD_PREP(PHY_CTRL_R20_USB2_OTG_VBUS_TRIM_2_0
, 4) |
233 PHY_CTRL_R20_USB2_OTG_VBUSDET_EN
|
234 FIELD_PREP(PHY_CTRL_R20_USB2_DMON_SEL_3_0
, 15) |
235 PHY_CTRL_R20_USB2_EDGE_DRV_EN
|
236 FIELD_PREP(PHY_CTRL_R20_USB2_EDGE_DRV_TRIM_1_0
, 3) |
237 FIELD_PREP(PHY_CTRL_R20_USB2_BGR_ADJ_4_0
, 0) |
238 FIELD_PREP(PHY_CTRL_R20_USB2_BGR_VREF_4_0
, 0) |
239 FIELD_PREP(PHY_CTRL_R20_USB2_BGR_DBG_1_0
, 0));
241 if (priv
->soc_id
== MESON_SOC_G12A
)
242 regmap_write(priv
->regmap
, PHY_CTRL_R4
,
243 FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_7_0
, 0xf) |
244 FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_15_8
, 0xf) |
245 FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_23_16
, 0xf) |
246 PHY_CTRL_R4_TEST_BYPASS_MODE_EN
|
247 FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_1_0
, 0) |
248 FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_3_2
, 0));
249 else if (priv
->soc_id
== MESON_SOC_A1
) {
250 regmap_write(priv
->regmap
, PHY_CTRL_R21
,
251 PHY_CTRL_R21_USB2_CAL_ACK_EN
|
252 PHY_CTRL_R21_USB2_TX_STRG_PD
|
253 FIELD_PREP(PHY_CTRL_R21_USB2_OTG_ACA_TRIM_1_0
, 2));
255 /* Analog Settings */
256 regmap_write(priv
->regmap
, PHY_CTRL_R13
,
257 FIELD_PREP(PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET
, 7));
260 /* Tuning Disconnect Threshold */
261 regmap_write(priv
->regmap
, PHY_CTRL_R3
,
262 FIELD_PREP(PHY_CTRL_R3_SQUELCH_REF
, 0) |
263 FIELD_PREP(PHY_CTRL_R3_HSDIC_REF
, 1) |
264 FIELD_PREP(PHY_CTRL_R3_DISC_THRESH
, 3));
266 if (priv
->soc_id
== MESON_SOC_G12A
) {
267 /* Analog Settings */
268 regmap_write(priv
->regmap
, PHY_CTRL_R14
, 0);
269 regmap_write(priv
->regmap
, PHY_CTRL_R13
,
270 PHY_CTRL_R13_UPDATE_PMA_SIGNALS
|
271 FIELD_PREP(PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET
, 7));
277 static int phy_meson_g12a_usb2_exit(struct phy
*phy
)
279 struct phy_meson_g12a_usb2_priv
*priv
= phy_get_drvdata(phy
);
281 return reset_control_reset(priv
->reset
);
284 /* set_mode is not needed, mode setting is handled via the UTMI bus */
285 static const struct phy_ops phy_meson_g12a_usb2_ops
= {
286 .init
= phy_meson_g12a_usb2_init
,
287 .exit
= phy_meson_g12a_usb2_exit
,
288 .owner
= THIS_MODULE
,
291 static int phy_meson_g12a_usb2_probe(struct platform_device
*pdev
)
293 struct device
*dev
= &pdev
->dev
;
294 struct phy_provider
*phy_provider
;
295 struct phy_meson_g12a_usb2_priv
*priv
;
300 priv
= devm_kzalloc(dev
, sizeof(*priv
), GFP_KERNEL
);
305 platform_set_drvdata(pdev
, priv
);
307 base
= devm_platform_ioremap_resource(pdev
, 0);
309 return PTR_ERR(base
);
311 priv
->soc_id
= (enum meson_soc_id
)of_device_get_match_data(&pdev
->dev
);
313 priv
->regmap
= devm_regmap_init_mmio(dev
, base
,
314 &phy_meson_g12a_usb2_regmap_conf
);
315 if (IS_ERR(priv
->regmap
))
316 return PTR_ERR(priv
->regmap
);
318 priv
->clk
= devm_clk_get(dev
, "xtal");
319 if (IS_ERR(priv
->clk
))
320 return PTR_ERR(priv
->clk
);
322 priv
->reset
= devm_reset_control_get(dev
, "phy");
323 if (IS_ERR(priv
->reset
))
324 return PTR_ERR(priv
->reset
);
326 ret
= reset_control_deassert(priv
->reset
);
330 phy
= devm_phy_create(dev
, NULL
, &phy_meson_g12a_usb2_ops
);
333 if (ret
!= -EPROBE_DEFER
)
334 dev_err(dev
, "failed to create PHY\n");
339 phy_set_bus_width(phy
, 8);
340 phy_set_drvdata(phy
, priv
);
342 phy_provider
= devm_of_phy_provider_register(dev
, of_phy_simple_xlate
);
344 return PTR_ERR_OR_ZERO(phy_provider
);
347 static const struct of_device_id phy_meson_g12a_usb2_of_match
[] = {
349 .compatible
= "amlogic,g12a-usb2-phy",
350 .data
= (void *)MESON_SOC_G12A
,
353 .compatible
= "amlogic,a1-usb2-phy",
354 .data
= (void *)MESON_SOC_A1
,
358 MODULE_DEVICE_TABLE(of
, phy_meson_g12a_usb2_of_match
);
360 static struct platform_driver phy_meson_g12a_usb2_driver
= {
361 .probe
= phy_meson_g12a_usb2_probe
,
363 .name
= "phy-meson-g12a-usb2",
364 .of_match_table
= phy_meson_g12a_usb2_of_match
,
367 module_platform_driver(phy_meson_g12a_usb2_driver
);
369 MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
370 MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
371 MODULE_DESCRIPTION("Meson G12A USB2 PHY driver");
372 MODULE_LICENSE("GPL v2");