drivers/phy/amlogic/phy-meson-gxl-usb2.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Meson GXL and GXM USB2 PHY driver
   4  *
   5  * Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
   6  */
   7
   8 #include <linux/clk.h>
   9 #include <linux/delay.h>
  10 #include <linux/io.h>
  11 #include <linux/module.h>
  12 #include <linux/of_device.h>
  13 #include <linux/regmap.h>
  14 #include <linux/reset.h>
  15 #include <linux/phy/phy.h>
  16 #include <linux/platform_device.h>
  17
  18 /* bits [31:27] are read-only */
  19 #define U2P_R0                                                  0x0
  20         #define U2P_R0_BYPASS_SEL                               BIT(0)
  21         #define U2P_R0_BYPASS_DM_EN                             BIT(1)
  22         #define U2P_R0_BYPASS_DP_EN                             BIT(2)
  23         #define U2P_R0_TXBITSTUFF_ENH                           BIT(3)
  24         #define U2P_R0_TXBITSTUFF_EN                            BIT(4)
  25         #define U2P_R0_DM_PULLDOWN                              BIT(5)
  26         #define U2P_R0_DP_PULLDOWN                              BIT(6)
  27         #define U2P_R0_DP_VBUS_VLD_EXT_SEL                      BIT(7)
  28         #define U2P_R0_DP_VBUS_VLD_EXT                          BIT(8)
  29         #define U2P_R0_ADP_PRB_EN                               BIT(9)
  30         #define U2P_R0_ADP_DISCHARGE                            BIT(10)
  31         #define U2P_R0_ADP_CHARGE                               BIT(11)
  32         #define U2P_R0_DRV_VBUS                                 BIT(12)
  33         #define U2P_R0_ID_PULLUP                                BIT(13)
  34         #define U2P_R0_LOOPBACK_EN_B                            BIT(14)
  35         #define U2P_R0_OTG_DISABLE                              BIT(15)
  36         #define U2P_R0_COMMON_ONN                               BIT(16)
  37         #define U2P_R0_FSEL_MASK                                GENMASK(19, 17)
  38         #define U2P_R0_REF_CLK_SEL_MASK                         GENMASK(21, 20)
  39         #define U2P_R0_POWER_ON_RESET                           BIT(22)
  40         #define U2P_R0_V_ATE_TEST_EN_B_MASK                     GENMASK(24, 23)
  41         #define U2P_R0_ID_SET_ID_DQ                             BIT(25)
  42         #define U2P_R0_ATE_RESET                                BIT(26)
  43         #define U2P_R0_FSV_MINUS                                BIT(27)
  44         #define U2P_R0_FSV_PLUS                                 BIT(28)
  45         #define U2P_R0_BYPASS_DM_DATA                           BIT(29)
  46         #define U2P_R0_BYPASS_DP_DATA                           BIT(30)
  47
  48 #define U2P_R1                                                  0x4
  49         #define U2P_R1_BURN_IN_TEST                             BIT(0)
  50         #define U2P_R1_ACA_ENABLE                               BIT(1)
  51         #define U2P_R1_DCD_ENABLE                               BIT(2)
  52         #define U2P_R1_VDAT_SRC_EN_B                            BIT(3)
  53         #define U2P_R1_VDAT_DET_EN_B                            BIT(4)
  54         #define U2P_R1_CHARGES_SEL                              BIT(5)
  55         #define U2P_R1_TX_PREEMP_PULSE_TUNE                     BIT(6)
  56         #define U2P_R1_TX_PREEMP_AMP_TUNE_MASK                  GENMASK(8, 7)
  57         #define U2P_R1_TX_RES_TUNE_MASK                         GENMASK(10, 9)
  58         #define U2P_R1_TX_RISE_TUNE_MASK                        GENMASK(12, 11)
  59         #define U2P_R1_TX_VREF_TUNE_MASK                        GENMASK(16, 13)
  60         #define U2P_R1_TX_FSLS_TUNE_MASK                        GENMASK(20, 17)
  61         #define U2P_R1_TX_HSXV_TUNE_MASK                        GENMASK(22, 21)
  62         #define U2P_R1_OTG_TUNE_MASK                            GENMASK(25, 23)
  63         #define U2P_R1_SQRX_TUNE_MASK                           GENMASK(28, 26)
  64         #define U2P_R1_COMP_DIS_TUNE_MASK                       GENMASK(31, 29)
  65
  66 /* bits [31:14] are read-only */
  67 #define U2P_R2                                                  0x8
  68         #define U2P_R2_TESTDATA_IN_MASK                         GENMASK(7, 0)
  69         #define U2P_R2_TESTADDR_MASK                            GENMASK(11, 8)
  70         #define U2P_R2_TESTDATA_OUT_SEL                         BIT(12)
  71         #define U2P_R2_TESTCLK                                  BIT(13)
  72         #define U2P_R2_TESTDATA_OUT_MASK                        GENMASK(17, 14)
  73         #define U2P_R2_ACA_PIN_RANGE_C                          BIT(18)
  74         #define U2P_R2_ACA_PIN_RANGE_B                          BIT(19)
  75         #define U2P_R2_ACA_PIN_RANGE_A                          BIT(20)
  76         #define U2P_R2_ACA_PIN_GND                              BIT(21)
  77         #define U2P_R2_ACA_PIN_FLOAT                            BIT(22)
  78         #define U2P_R2_CHARGE_DETECT                            BIT(23)
  79         #define U2P_R2_DEVICE_SESSION_VALID                     BIT(24)
  80         #define U2P_R2_ADP_PROBE                                BIT(25)
  81         #define U2P_R2_ADP_SENSE                                BIT(26)
  82         #define U2P_R2_SESSION_END                              BIT(27)
  83         #define U2P_R2_VBUS_VALID                               BIT(28)
  84         #define U2P_R2_B_VALID                                  BIT(29)
  85         #define U2P_R2_A_VALID                                  BIT(30)
  86         #define U2P_R2_ID_DIG                                   BIT(31)
  87
  88 #define U2P_R3                                                  0xc
  89
  90 #define RESET_COMPLETE_TIME                             500
  91
  92 struct phy_meson_gxl_usb2_priv {
  93         struct regmap           *regmap;
  94         enum phy_mode           mode;
  95         int                     is_enabled;
  96         struct clk              *clk;
  97         struct reset_control    *reset;
  98 };
  99
 100 static const struct regmap_config phy_meson_gxl_usb2_regmap_conf = {
 101         .reg_bits = 8,
 102         .val_bits = 32,
 103         .reg_stride = 4,
 104         .max_register = U2P_R3,
 105 };
 106
 107 static int phy_meson_gxl_usb2_init(struct phy *phy)
 108 {
 109         struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
 110         int ret;
 111
 112         ret = reset_control_reset(priv->reset);
 113         if (ret)
 114                 return ret;
 115
 116         ret = clk_prepare_enable(priv->clk);
 117         if (ret)
 118                 return ret;
 119
 120         return 0;
 121 }
 122
 123 static int phy_meson_gxl_usb2_exit(struct phy *phy)
 124 {
 125         struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
 126
 127         clk_disable_unprepare(priv->clk);
 128
 129         return 0;
 130 }
 131
 132 static int phy_meson_gxl_usb2_reset(struct phy *phy)
 133 {
 134         struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
 135
 136         if (priv->is_enabled) {
 137                 /* reset the PHY and wait until settings are stabilized */
 138                 regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET,
 139                                    U2P_R0_POWER_ON_RESET);
 140                 udelay(RESET_COMPLETE_TIME);
 141                 regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET,
 142                                    0);
 143                 udelay(RESET_COMPLETE_TIME);
 144         }
 145
 146         return 0;
 147 }
 148
 149 static int phy_meson_gxl_usb2_set_mode(struct phy *phy,
 150                                        enum phy_mode mode, int submode)
 151 {
 152         struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
 153
 154         switch (mode) {
 155         case PHY_MODE_USB_HOST:
 156         case PHY_MODE_USB_OTG:
 157                 regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DM_PULLDOWN,
 158                                    U2P_R0_DM_PULLDOWN);
 159                 regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DP_PULLDOWN,
 160                                    U2P_R0_DP_PULLDOWN);
 161                 regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_ID_PULLUP,
 162                                    U2P_R0_ID_PULLUP);
 163                 break;
 164
 165         case PHY_MODE_USB_DEVICE:
 166                 regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DM_PULLDOWN,
 167                                    0);
 168                 regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DP_PULLDOWN,
 169                                    0);
 170                 regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_ID_PULLUP,
 171                                    U2P_R0_ID_PULLUP);
 172                 break;
 173
 174         default:
 175                 return -EINVAL;
 176         }
 177
 178         phy_meson_gxl_usb2_reset(phy);
 179
 180         priv->mode = mode;
 181
 182         return 0;
 183 }
 184
 185 static int phy_meson_gxl_usb2_power_off(struct phy *phy)
 186 {
 187         struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
 188
 189         priv->is_enabled = 0;
 190
 191         /* power off the PHY by putting it into reset mode */
 192         regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET,
 193                            U2P_R0_POWER_ON_RESET);
 194
 195         return 0;
 196 }
 197
 198 static int phy_meson_gxl_usb2_power_on(struct phy *phy)
 199 {
 200         struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
 201         int ret;
 202
 203         priv->is_enabled = 1;
 204
 205         /* power on the PHY by taking it out of reset mode */
 206         regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET, 0);
 207
 208         ret = phy_meson_gxl_usb2_set_mode(phy, priv->mode, 0);
 209         if (ret) {
 210                 phy_meson_gxl_usb2_power_off(phy);
 211
 212                 dev_err(&phy->dev, "Failed to initialize PHY with mode %d\n",
 213                         priv->mode);
 214                 return ret;
 215         }
 216
 217         return 0;
 218 }
 219
 220 static const struct phy_ops phy_meson_gxl_usb2_ops = {
 221         .init           = phy_meson_gxl_usb2_init,
 222         .exit           = phy_meson_gxl_usb2_exit,
 223         .power_on       = phy_meson_gxl_usb2_power_on,
 224         .power_off      = phy_meson_gxl_usb2_power_off,
 225         .set_mode       = phy_meson_gxl_usb2_set_mode,
 226         .reset          = phy_meson_gxl_usb2_reset,
 227         .owner          = THIS_MODULE,
 228 };
 229
 230 static int phy_meson_gxl_usb2_probe(struct platform_device *pdev)
 231 {
 232         struct device *dev = &pdev->dev;
 233         struct phy_provider *phy_provider;
 234         struct phy_meson_gxl_usb2_priv *priv;
 235         struct phy *phy;
 236         void __iomem *base;
 237         int ret;
 238
 239         priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 240         if (!priv)
 241                 return -ENOMEM;
 242
 243         platform_set_drvdata(pdev, priv);
 244
 245         base = devm_platform_ioremap_resource(pdev, 0);
 246         if (IS_ERR(base))
 247                 return PTR_ERR(base);
 248
 249         /* start in host mode */
 250         priv->mode = PHY_MODE_USB_HOST;
 251
 252         priv->regmap = devm_regmap_init_mmio(dev, base,
 253                                              &phy_meson_gxl_usb2_regmap_conf);
 254         if (IS_ERR(priv->regmap))
 255                 return PTR_ERR(priv->regmap);
 256
 257         priv->clk = devm_clk_get_optional(dev, "phy");
 258         if (IS_ERR(priv->clk))
 259                 return PTR_ERR(priv->clk);
 260
 261         priv->reset = devm_reset_control_get_optional_shared(dev, "phy");
 262         if (IS_ERR(priv->reset))
 263                 return PTR_ERR(priv->reset);
 264
 265         phy = devm_phy_create(dev, NULL, &phy_meson_gxl_usb2_ops);
 266         if (IS_ERR(phy)) {
 267                 ret = PTR_ERR(phy);
 268                 if (ret != -EPROBE_DEFER)
 269                         dev_err(dev, "failed to create PHY\n");
 270
 271                 return ret;
 272         }
 273
 274         phy_set_drvdata(phy, priv);
 275
 276         phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
 277
 278         return PTR_ERR_OR_ZERO(phy_provider);
 279 }
 280
 281 static const struct of_device_id phy_meson_gxl_usb2_of_match[] = {
 282         { .compatible = "amlogic,meson-gxl-usb2-phy", },
 283         { },
 284 };
 285 MODULE_DEVICE_TABLE(of, phy_meson_gxl_usb2_of_match);
 286
 287 static struct platform_driver phy_meson_gxl_usb2_driver = {
 288         .probe  = phy_meson_gxl_usb2_probe,
 289         .driver = {
 290                 .name           = "phy-meson-gxl-usb2",
 291                 .of_match_table = phy_meson_gxl_usb2_of_match,
 292         },
 293 };
 294 module_platform_driver(phy_meson_gxl_usb2_driver);
 295
 296 MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
 297 MODULE_DESCRIPTION("Meson GXL and GXM USB2 PHY driver");
 298 MODULE_LICENSE("GPL v2");