?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block
[linux/fpc-iii.git] / drivers / phy / broadcom / phy-bcm63xx-usbh.c
blob6c05ba8b08bec3a1160aa12568673ed2b554d2a1
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * BCM6328 USBH PHY Controller Driver
4 *
5 * Copyright (C) 2020 Álvaro Fernández Rojas <noltari@gmail.com>
6 * Copyright (C) 2015 Simon Arlott
7 *
8 * Derived from bcm963xx_4.12L.06B_consumer/kernel/linux/arch/mips/bcm963xx/setup.c:
9 * Copyright (C) 2002 Broadcom Corporation
10 *
11 * Derived from OpenWrt patches:
12 * Copyright (C) 2013 Jonas Gorski <jonas.gorski@gmail.com>
13 * Copyright (C) 2013 Florian Fainelli <f.fainelli@gmail.com>
14 * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
15 */
16
17 #include <linux/clk.h>
18 #include <linux/io.h>
19 #include <linux/module.h>
20 #include <linux/phy/phy.h>
21 #include <linux/platform_device.h>
22 #include <linux/reset.h>
23
24 /* USBH control register offsets */
25 enum usbh_regs {
26 USBH_BRT_CONTROL1 = 0,
27 USBH_BRT_CONTROL2,
28 USBH_BRT_STATUS1,
29 USBH_BRT_STATUS2,
30 USBH_UTMI_CONTROL1,
31 #define USBH_UC1_DEV_MODE_SEL BIT(0)
32 USBH_TEST_PORT_CONTROL,
33 USBH_PLL_CONTROL1,
34 #define USBH_PLLC_REFCLKSEL_SHIFT 0
35 #define USBH_PLLC_REFCLKSEL_MASK (0x3 << USBH_PLLC_REFCLKSEL_SHIFT)
36 #define USBH_PLLC_CLKSEL_SHIFT 2
37 #define USBH_PLLC_CLKSEL_MASK (0x3 << USBH_PLLC_CLKSEL_MASK)
38 #define USBH_PLLC_XTAL_PWRDWNB BIT(4)
39 #define USBH_PLLC_PLL_PWRDWNB BIT(5)
40 #define USBH_PLLC_PLL_CALEN BIT(6)
41 #define USBH_PLLC_PHYPLL_BYP BIT(7)
42 #define USBH_PLLC_PLL_RESET BIT(8)
43 #define USBH_PLLC_PLL_IDDQ_PWRDN BIT(9)
44 #define USBH_PLLC_PLL_PWRDN_DELAY BIT(10)
45 #define USBH_6318_PLLC_PLL_SUSPEND_EN BIT(27)
46 #define USBH_6318_PLLC_PHYPLL_BYP BIT(29)
47 #define USBH_6318_PLLC_PLL_RESET BIT(30)
48 #define USBH_6318_PLLC_PLL_IDDQ_PWRDN BIT(31)
49 USBH_SWAP_CONTROL,
50 #define USBH_SC_OHCI_DATA_SWAP BIT(0)
51 #define USBH_SC_OHCI_ENDIAN_SWAP BIT(1)
52 #define USBH_SC_OHCI_LOGICAL_ADDR_EN BIT(2)
53 #define USBH_SC_EHCI_DATA_SWAP BIT(3)
54 #define USBH_SC_EHCI_ENDIAN_SWAP BIT(4)
55 #define USBH_SC_EHCI_LOGICAL_ADDR_EN BIT(5)
56 #define USBH_SC_USB_DEVICE_SEL BIT(6)
57 USBH_GENERIC_CONTROL,
58 #define USBH_GC_PLL_SUSPEND_EN BIT(1)
59 USBH_FRAME_ADJUST_VALUE,
60 USBH_SETUP,
61 #define USBH_S_IOC BIT(4)
62 #define USBH_S_IPP BIT(5)
63 USBH_MDIO,
64 USBH_MDIO32,
65 USBH_USB_SIM_CONTROL,
66 #define USBH_USC_LADDR_SEL BIT(5)
67
68 __USBH_ENUM_SIZE
69 };
70
71 struct bcm63xx_usbh_phy_variant {
72 /* Registers */
73 long regs[__USBH_ENUM_SIZE];
74
75 /* PLLC bits to set/clear for power on */
76 u32 power_pllc_clr;
77 u32 power_pllc_set;
78
79 /* Setup bits to set/clear for power on */
80 u32 setup_clr;
81 u32 setup_set;
82
83 /* Swap Control bits to set */
84 u32 swapctl_dev_set;
85
86 /* Test Port Control value to set if non-zero */
87 u32 tpc_val;
88
89 /* USB Sim Control bits to set */
90 u32 usc_set;
91
92 /* UTMI Control 1 bits to set */
93 u32 utmictl1_dev_set;
94 };
95
96 struct bcm63xx_usbh_phy {
97 void __iomem *base;
98 struct clk *usbh_clk;
99 struct clk *usb_ref_clk;
100 struct reset_control *reset;
101 const struct bcm63xx_usbh_phy_variant *variant;
102 bool device_mode;
103 };
104
105 static const struct bcm63xx_usbh_phy_variant usbh_bcm6318 = {
106 .regs = {
107 [USBH_BRT_CONTROL1] = -1,
108 [USBH_BRT_CONTROL2] = -1,
109 [USBH_BRT_STATUS1] = -1,
110 [USBH_BRT_STATUS2] = -1,
111 [USBH_UTMI_CONTROL1] = 0x2c,
112 [USBH_TEST_PORT_CONTROL] = 0x1c,
113 [USBH_PLL_CONTROL1] = 0x04,
114 [USBH_SWAP_CONTROL] = 0x0c,
115 [USBH_GENERIC_CONTROL] = -1,
116 [USBH_FRAME_ADJUST_VALUE] = 0x08,
117 [USBH_SETUP] = 0x00,
118 [USBH_MDIO] = 0x14,
119 [USBH_MDIO32] = 0x18,
120 [USBH_USB_SIM_CONTROL] = 0x20,
121 },
122 .power_pllc_clr = USBH_6318_PLLC_PLL_IDDQ_PWRDN,
123 .power_pllc_set = USBH_6318_PLLC_PLL_SUSPEND_EN,
124 .setup_set = USBH_S_IOC,
125 .swapctl_dev_set = USBH_SC_USB_DEVICE_SEL,
126 .usc_set = USBH_USC_LADDR_SEL,
127 .utmictl1_dev_set = USBH_UC1_DEV_MODE_SEL,
128 };
129
130 static const struct bcm63xx_usbh_phy_variant usbh_bcm6328 = {
131 .regs = {
132 [USBH_BRT_CONTROL1] = 0x00,
133 [USBH_BRT_CONTROL2] = 0x04,
134 [USBH_BRT_STATUS1] = 0x08,
135 [USBH_BRT_STATUS2] = 0x0c,
136 [USBH_UTMI_CONTROL1] = 0x10,
137 [USBH_TEST_PORT_CONTROL] = 0x14,
138 [USBH_PLL_CONTROL1] = 0x18,
139 [USBH_SWAP_CONTROL] = 0x1c,
140 [USBH_GENERIC_CONTROL] = 0x20,
141 [USBH_FRAME_ADJUST_VALUE] = 0x24,
142 [USBH_SETUP] = 0x28,
143 [USBH_MDIO] = 0x2c,
144 [USBH_MDIO32] = 0x30,
145 [USBH_USB_SIM_CONTROL] = 0x34,
146 },
147 .setup_set = USBH_S_IOC,
148 .swapctl_dev_set = USBH_SC_USB_DEVICE_SEL,
149 .utmictl1_dev_set = USBH_UC1_DEV_MODE_SEL,
150 };
151
152 static const struct bcm63xx_usbh_phy_variant usbh_bcm6358 = {
153 .regs = {
154 [USBH_BRT_CONTROL1] = -1,
155 [USBH_BRT_CONTROL2] = -1,
156 [USBH_BRT_STATUS1] = -1,
157 [USBH_BRT_STATUS2] = -1,
158 [USBH_UTMI_CONTROL1] = -1,
159 [USBH_TEST_PORT_CONTROL] = 0x24,
160 [USBH_PLL_CONTROL1] = -1,
161 [USBH_SWAP_CONTROL] = 0x00,
162 [USBH_GENERIC_CONTROL] = -1,
163 [USBH_FRAME_ADJUST_VALUE] = -1,
164 [USBH_SETUP] = -1,
165 [USBH_MDIO] = -1,
166 [USBH_MDIO32] = -1,
167 [USBH_USB_SIM_CONTROL] = -1,
168 },
169 /*
170 * The magic value comes for the original vendor BSP
171 * and is needed for USB to work. Datasheet does not
172 * help, so the magic value is used as-is.
173 */
174 .tpc_val = 0x1c0020,
175 };
176
177 static const struct bcm63xx_usbh_phy_variant usbh_bcm6368 = {
178 .regs = {
179 [USBH_BRT_CONTROL1] = 0x00,
180 [USBH_BRT_CONTROL2] = 0x04,
181 [USBH_BRT_STATUS1] = 0x08,
182 [USBH_BRT_STATUS2] = 0x0c,
183 [USBH_UTMI_CONTROL1] = 0x10,
184 [USBH_TEST_PORT_CONTROL] = 0x14,
185 [USBH_PLL_CONTROL1] = 0x18,
186 [USBH_SWAP_CONTROL] = 0x1c,
187 [USBH_GENERIC_CONTROL] = -1,
188 [USBH_FRAME_ADJUST_VALUE] = 0x24,
189 [USBH_SETUP] = 0x28,
190 [USBH_MDIO] = 0x2c,
191 [USBH_MDIO32] = 0x30,
192 [USBH_USB_SIM_CONTROL] = 0x34,
193 },
194 .power_pllc_clr = USBH_PLLC_PLL_IDDQ_PWRDN | USBH_PLLC_PLL_PWRDN_DELAY,
195 .setup_set = USBH_S_IOC,
196 .swapctl_dev_set = USBH_SC_USB_DEVICE_SEL,
197 .utmictl1_dev_set = USBH_UC1_DEV_MODE_SEL,
198 };
199
200 static const struct bcm63xx_usbh_phy_variant usbh_bcm63268 = {
201 .regs = {
202 [USBH_BRT_CONTROL1] = 0x00,
203 [USBH_BRT_CONTROL2] = 0x04,
204 [USBH_BRT_STATUS1] = 0x08,
205 [USBH_BRT_STATUS2] = 0x0c,
206 [USBH_UTMI_CONTROL1] = 0x10,
207 [USBH_TEST_PORT_CONTROL] = 0x14,
208 [USBH_PLL_CONTROL1] = 0x18,
209 [USBH_SWAP_CONTROL] = 0x1c,
210 [USBH_GENERIC_CONTROL] = 0x20,
211 [USBH_FRAME_ADJUST_VALUE] = 0x24,
212 [USBH_SETUP] = 0x28,
213 [USBH_MDIO] = 0x2c,
214 [USBH_MDIO32] = 0x30,
215 [USBH_USB_SIM_CONTROL] = 0x34,
216 },
217 .power_pllc_clr = USBH_PLLC_PLL_IDDQ_PWRDN | USBH_PLLC_PLL_PWRDN_DELAY,
218 .setup_clr = USBH_S_IPP,
219 .setup_set = USBH_S_IOC,
220 .swapctl_dev_set = USBH_SC_USB_DEVICE_SEL,
221 .utmictl1_dev_set = USBH_UC1_DEV_MODE_SEL,
222 };
223
224 static inline bool usbh_has_reg(struct bcm63xx_usbh_phy *usbh, int reg)
225 {
226 return (usbh->variant->regs[reg] >= 0);
227 }
228
229 static inline u32 usbh_readl(struct bcm63xx_usbh_phy *usbh, int reg)
230 {
231 return __raw_readl(usbh->base + usbh->variant->regs[reg]);
232 }
233
234 static inline void usbh_writel(struct bcm63xx_usbh_phy *usbh, int reg,
235 u32 value)
236 {
237 __raw_writel(value, usbh->base + usbh->variant->regs[reg]);
238 }
239
240 static int bcm63xx_usbh_phy_init(struct phy *phy)
241 {
242 struct bcm63xx_usbh_phy *usbh = phy_get_drvdata(phy);
243 int ret;
244
245 ret = clk_prepare_enable(usbh->usbh_clk);
246 if (ret) {
247 dev_err(&phy->dev, "unable to enable usbh clock: %d\n", ret);
248 return ret;
249 }
250
251 ret = clk_prepare_enable(usbh->usb_ref_clk);
252 if (ret) {
253 dev_err(&phy->dev, "unable to enable usb_ref clock: %d\n", ret);
254 clk_disable_unprepare(usbh->usbh_clk);
255 return ret;
256 }
257
258 ret = reset_control_reset(usbh->reset);
259 if (ret) {
260 dev_err(&phy->dev, "unable to reset device: %d\n", ret);
261 clk_disable_unprepare(usbh->usb_ref_clk);
262 clk_disable_unprepare(usbh->usbh_clk);
263 return ret;
264 }
265
266 /* Configure to work in native CPU endian */
267 if (usbh_has_reg(usbh, USBH_SWAP_CONTROL)) {
268 u32 val = usbh_readl(usbh, USBH_SWAP_CONTROL);
269
270 val |= USBH_SC_EHCI_DATA_SWAP;
271 val &= ~USBH_SC_EHCI_ENDIAN_SWAP;
272
273 val |= USBH_SC_OHCI_DATA_SWAP;
274 val &= ~USBH_SC_OHCI_ENDIAN_SWAP;
275
276 if (usbh->device_mode && usbh->variant->swapctl_dev_set)
277 val |= usbh->variant->swapctl_dev_set;
278
279 usbh_writel(usbh, USBH_SWAP_CONTROL, val);
280 }
281
282 if (usbh_has_reg(usbh, USBH_SETUP)) {
283 u32 val = usbh_readl(usbh, USBH_SETUP);
284
285 val |= usbh->variant->setup_set;
286 val &= ~usbh->variant->setup_clr;
287
288 usbh_writel(usbh, USBH_SETUP, val);
289 }
290
291 if (usbh_has_reg(usbh, USBH_USB_SIM_CONTROL)) {
292 u32 val = usbh_readl(usbh, USBH_USB_SIM_CONTROL);
293
294 val |= usbh->variant->usc_set;
295
296 usbh_writel(usbh, USBH_USB_SIM_CONTROL, val);
297 }
298
299 if (usbh->variant->tpc_val &&
300 usbh_has_reg(usbh, USBH_TEST_PORT_CONTROL))
301 usbh_writel(usbh, USBH_TEST_PORT_CONTROL,
302 usbh->variant->tpc_val);
303
304 if (usbh->device_mode &&
305 usbh_has_reg(usbh, USBH_UTMI_CONTROL1) &&
306 usbh->variant->utmictl1_dev_set) {
307 u32 val = usbh_readl(usbh, USBH_UTMI_CONTROL1);
308
309 val |= usbh->variant->utmictl1_dev_set;
310
311 usbh_writel(usbh, USBH_UTMI_CONTROL1, val);
312 }
313
314 return 0;
315 }
316
317 static int bcm63xx_usbh_phy_power_on(struct phy *phy)
318 {
319 struct bcm63xx_usbh_phy *usbh = phy_get_drvdata(phy);
320
321 if (usbh_has_reg(usbh, USBH_PLL_CONTROL1)) {
322 u32 val = usbh_readl(usbh, USBH_PLL_CONTROL1);
323
324 val |= usbh->variant->power_pllc_set;
325 val &= ~usbh->variant->power_pllc_clr;
326
327 usbh_writel(usbh, USBH_PLL_CONTROL1, val);
328 }
329
330 return 0;
331 }
332
333 static int bcm63xx_usbh_phy_power_off(struct phy *phy)
334 {
335 struct bcm63xx_usbh_phy *usbh = phy_get_drvdata(phy);
336
337 if (usbh_has_reg(usbh, USBH_PLL_CONTROL1)) {
338 u32 val = usbh_readl(usbh, USBH_PLL_CONTROL1);
339
340 val &= ~usbh->variant->power_pllc_set;
341 val |= usbh->variant->power_pllc_clr;
342
343 usbh_writel(usbh, USBH_PLL_CONTROL1, val);
344 }
345
346 return 0;
347 }
348
349 static int bcm63xx_usbh_phy_exit(struct phy *phy)
350 {
351 struct bcm63xx_usbh_phy *usbh = phy_get_drvdata(phy);
352
353 clk_disable_unprepare(usbh->usbh_clk);
354 clk_disable_unprepare(usbh->usb_ref_clk);
355
356 return 0;
357 }
358
359 static const struct phy_ops bcm63xx_usbh_phy_ops = {
360 .exit = bcm63xx_usbh_phy_exit,
361 .init = bcm63xx_usbh_phy_init,
362 .power_off = bcm63xx_usbh_phy_power_off,
363 .power_on = bcm63xx_usbh_phy_power_on,
364 .owner = THIS_MODULE,
365 };
366
367 static struct phy *bcm63xx_usbh_phy_xlate(struct device *dev,
368 struct of_phandle_args *args)
369 {
370 struct bcm63xx_usbh_phy *usbh = dev_get_drvdata(dev);
371
372 usbh->device_mode = !!args->args[0];
373
374 return of_phy_simple_xlate(dev, args);
375 }
376
377 static int __init bcm63xx_usbh_phy_probe(struct platform_device *pdev)
378 {
379 struct device *dev = &pdev->dev;
380 struct bcm63xx_usbh_phy *usbh;
381 const struct bcm63xx_usbh_phy_variant *variant;
382 struct phy *phy;
383 struct phy_provider *phy_provider;
384
385 usbh = devm_kzalloc(dev, sizeof(*usbh), GFP_KERNEL);
386 if (!usbh)
387 return -ENOMEM;
388
389 variant = device_get_match_data(dev);
390 if (!variant)
391 return -EINVAL;
392 usbh->variant = variant;
393
394 usbh->base = devm_platform_ioremap_resource(pdev, 0);
395 if (IS_ERR(usbh->base))
396 return PTR_ERR(usbh->base);
397
398 usbh->reset = devm_reset_control_get_exclusive(dev, NULL);
399 if (IS_ERR(usbh->reset)) {
400 if (PTR_ERR(usbh->reset) != -EPROBE_DEFER)
401 dev_err(dev, "failed to get reset\n");
402 return PTR_ERR(usbh->reset);
403 }
404
405 usbh->usbh_clk = devm_clk_get_optional(dev, "usbh");
406 if (IS_ERR(usbh->usbh_clk))
407 return PTR_ERR(usbh->usbh_clk);
408
409 usbh->usb_ref_clk = devm_clk_get_optional(dev, "usb_ref");
410 if (IS_ERR(usbh->usb_ref_clk))
411 return PTR_ERR(usbh->usb_ref_clk);
412
413 phy = devm_phy_create(dev, NULL, &bcm63xx_usbh_phy_ops);
414 if (IS_ERR(phy)) {
415 dev_err(dev, "failed to create PHY\n");
416 return PTR_ERR(phy);
417 }
418
419 platform_set_drvdata(pdev, usbh);
420 phy_set_drvdata(phy, usbh);
421
422 phy_provider = devm_of_phy_provider_register(dev,
423 bcm63xx_usbh_phy_xlate);
424 if (IS_ERR(phy_provider)) {
425 dev_err(dev, "failed to register PHY provider\n");
426 return PTR_ERR(phy_provider);
427 }
428
429 dev_dbg(dev, "Registered BCM63xx USB PHY driver\n");
430
431 return 0;
432 }
433
434 static const struct of_device_id bcm63xx_usbh_phy_ids[] __initconst = {
435 { .compatible = "brcm,bcm6318-usbh-phy", .data = &usbh_bcm6318 },
436 { .compatible = "brcm,bcm6328-usbh-phy", .data = &usbh_bcm6328 },
437 { .compatible = "brcm,bcm6358-usbh-phy", .data = &usbh_bcm6358 },
438 { .compatible = "brcm,bcm6362-usbh-phy", .data = &usbh_bcm6368 },
439 { .compatible = "brcm,bcm6368-usbh-phy", .data = &usbh_bcm6368 },
440 { .compatible = "brcm,bcm63268-usbh-phy", .data = &usbh_bcm63268 },
441 { /* sentinel */ }
442 };
443 MODULE_DEVICE_TABLE(of, bcm63xx_usbh_phy_ids);
444
445 static struct platform_driver bcm63xx_usbh_phy_driver __refdata = {
446 .driver = {
447 .name = "bcm63xx-usbh-phy",
448 .of_match_table = bcm63xx_usbh_phy_ids,
449 },
450 .probe = bcm63xx_usbh_phy_probe,
451 };
452 module_platform_driver(bcm63xx_usbh_phy_driver);
453
454 MODULE_DESCRIPTION("BCM63xx USBH PHY driver");
455 MODULE_AUTHOR("Álvaro Fernández Rojas <noltari@gmail.com>");
456 MODULE_AUTHOR("Simon Arlott");
457 MODULE_LICENSE("GPL");
Linux with added FPC-III support