drivers/regulator/88pm800-regulator.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Regulators driver for Marvell 88PM800
   4  *
   5  * Copyright (C) 2012 Marvell International Ltd.
   6  * Joseph(Yossi) Hanin <yhanin@marvell.com>
   7  * Yi Zhang <yizhang@marvell.com>
   8  */
   9 #include <linux/module.h>
  10 #include <linux/moduleparam.h>
  11 #include <linux/init.h>
  12 #include <linux/err.h>
  13 #include <linux/regmap.h>
  14 #include <linux/regulator/driver.h>
  15 #include <linux/regulator/machine.h>
  16 #include <linux/mfd/88pm80x.h>
  17 #include <linux/delay.h>
  18 #include <linux/io.h>
  19 #include <linux/of.h>
  20 #include <linux/regulator/of_regulator.h>
  21
  22 /* LDO1 with DVC[0..3] */
  23 #define PM800_LDO1_VOUT         (0x08) /* VOUT1 */
  24 #define PM800_LDO1_VOUT_2       (0x09)
  25 #define PM800_LDO1_VOUT_3       (0x0A)
  26 #define PM800_LDO2_VOUT         (0x0B)
  27 #define PM800_LDO3_VOUT         (0x0C)
  28 #define PM800_LDO4_VOUT         (0x0D)
  29 #define PM800_LDO5_VOUT         (0x0E)
  30 #define PM800_LDO6_VOUT         (0x0F)
  31 #define PM800_LDO7_VOUT         (0x10)
  32 #define PM800_LDO8_VOUT         (0x11)
  33 #define PM800_LDO9_VOUT         (0x12)
  34 #define PM800_LDO10_VOUT        (0x13)
  35 #define PM800_LDO11_VOUT        (0x14)
  36 #define PM800_LDO12_VOUT        (0x15)
  37 #define PM800_LDO13_VOUT        (0x16)
  38 #define PM800_LDO14_VOUT        (0x17)
  39 #define PM800_LDO15_VOUT        (0x18)
  40 #define PM800_LDO16_VOUT        (0x19)
  41 #define PM800_LDO17_VOUT        (0x1A)
  42 #define PM800_LDO18_VOUT        (0x1B)
  43 #define PM800_LDO19_VOUT        (0x1C)
  44
  45 /* BUCK1 with DVC[0..3] */
  46 #define PM800_BUCK1             (0x3C)
  47 #define PM800_BUCK1_1           (0x3D)
  48 #define PM800_BUCK1_2           (0x3E)
  49 #define PM800_BUCK1_3           (0x3F)
  50 #define PM800_BUCK2             (0x40)
  51 #define PM800_BUCK3             (0x41)
  52 #define PM800_BUCK4             (0x42)
  53 #define PM800_BUCK4_1           (0x43)
  54 #define PM800_BUCK4_2           (0x44)
  55 #define PM800_BUCK4_3           (0x45)
  56 #define PM800_BUCK5             (0x46)
  57
  58 #define PM800_BUCK_ENA          (0x50)
  59 #define PM800_LDO_ENA1_1        (0x51)
  60 #define PM800_LDO_ENA1_2        (0x52)
  61 #define PM800_LDO_ENA1_3        (0x53)
  62
  63 #define PM800_LDO_ENA2_1        (0x56)
  64 #define PM800_LDO_ENA2_2        (0x57)
  65 #define PM800_LDO_ENA2_3        (0x58)
  66
  67 #define PM800_BUCK1_MISC1       (0x78)
  68 #define PM800_BUCK3_MISC1       (0x7E)
  69 #define PM800_BUCK4_MISC1       (0x81)
  70 #define PM800_BUCK5_MISC1       (0x84)
  71
  72 struct pm800_regulator_info {
  73         struct regulator_desc desc;
  74         int max_ua;
  75 };
  76
  77 /*
  78  * vreg - the buck regs string.
  79  * ereg - the string for the enable register.
  80  * ebit - the bit number in the enable register.
  81  * amax - the current
  82  * Buck has 2 kinds of voltage steps. It is easy to find voltage by ranges,
  83  * not the constant voltage table.
  84  * n_volt - Number of available selectors
  85  */
  86 #define PM800_BUCK(match, vreg, ereg, ebit, amax, volt_ranges, n_volt)  \
  87 {                                                                       \
  88         .desc   = {                                                     \
  89                 .name                   = #vreg,                        \
  90                 .of_match               = of_match_ptr(#match),         \
  91                 .regulators_node        = of_match_ptr("regulators"),   \
  92                 .ops                    = &pm800_volt_range_ops,        \
  93                 .type                   = REGULATOR_VOLTAGE,            \
  94                 .id                     = PM800_ID_##vreg,              \
  95                 .owner                  = THIS_MODULE,                  \
  96                 .n_voltages             = n_volt,                       \
  97                 .linear_ranges          = volt_ranges,                  \
  98                 .n_linear_ranges        = ARRAY_SIZE(volt_ranges),      \
  99                 .vsel_reg               = PM800_##vreg,                 \
 100                 .vsel_mask              = 0x7f,                         \
 101                 .enable_reg             = PM800_##ereg,                 \
 102                 .enable_mask            = 1 << (ebit),                  \
 103         },                                                              \
 104         .max_ua = (amax),                                               \
 105 }
 106
 107 /*
 108  * vreg - the LDO regs string
 109  * ereg -  the string for the enable register.
 110  * ebit - the bit number in the enable register.
 111  * amax - the current
 112  * volt_table - the LDO voltage table
 113  * For all the LDOes, there are too many ranges. Using volt_table will be
 114  * simpler and faster.
 115  */
 116 #define PM800_LDO(match, vreg, ereg, ebit, amax, ldo_volt_table)        \
 117 {                                                                       \
 118         .desc   = {                                                     \
 119                 .name                   = #vreg,                        \
 120                 .of_match               = of_match_ptr(#match),         \
 121                 .regulators_node        = of_match_ptr("regulators"),   \
 122                 .ops                    = &pm800_volt_table_ops,        \
 123                 .type                   = REGULATOR_VOLTAGE,            \
 124                 .id                     = PM800_ID_##vreg,              \
 125                 .owner                  = THIS_MODULE,                  \
 126                 .n_voltages             = ARRAY_SIZE(ldo_volt_table),   \
 127                 .vsel_reg               = PM800_##vreg##_VOUT,          \
 128                 .vsel_mask              = 0xf,                          \
 129                 .enable_reg             = PM800_##ereg,                 \
 130                 .enable_mask            = 1 << (ebit),                  \
 131                 .volt_table             = ldo_volt_table,               \
 132         },                                                              \
 133         .max_ua = (amax),                                               \
 134 }
 135
 136 /* Ranges are sorted in ascending order. */
 137 static const struct linear_range buck1_volt_range[] = {
 138         REGULATOR_LINEAR_RANGE(600000, 0, 0x4f, 12500),
 139         REGULATOR_LINEAR_RANGE(1600000, 0x50, 0x54, 50000),
 140 };
 141
 142 /* BUCK 2~5 have same ranges. */
 143 static const struct linear_range buck2_5_volt_range[] = {
 144         REGULATOR_LINEAR_RANGE(600000, 0, 0x4f, 12500),
 145         REGULATOR_LINEAR_RANGE(1600000, 0x50, 0x72, 50000),
 146 };
 147
 148 static const unsigned int ldo1_volt_table[] = {
 149         600000,  650000,  700000,  750000,  800000,  850000,  900000,  950000,
 150         1000000, 1050000, 1100000, 1150000, 1200000, 1300000, 1400000, 1500000,
 151 };
 152
 153 static const unsigned int ldo2_volt_table[] = {
 154         1700000, 1800000, 1900000, 2000000, 2100000, 2500000, 2700000, 2800000,
 155 };
 156
 157 /* LDO 3~17 have same voltage table. */
 158 static const unsigned int ldo3_17_volt_table[] = {
 159         1200000, 1250000, 1700000, 1800000, 1850000, 1900000, 2500000, 2600000,
 160         2700000, 2750000, 2800000, 2850000, 2900000, 3000000, 3100000, 3300000,
 161 };
 162
 163 /* LDO 18~19 have same voltage table. */
 164 static const unsigned int ldo18_19_volt_table[] = {
 165         1700000, 1800000, 1900000, 2500000, 2800000, 2900000, 3100000, 3300000,
 166 };
 167
 168 static int pm800_get_current_limit(struct regulator_dev *rdev)
 169 {
 170         struct pm800_regulator_info *info = rdev_get_drvdata(rdev);
 171
 172         return info->max_ua;
 173 }
 174
 175 static const struct regulator_ops pm800_volt_range_ops = {
 176         .list_voltage           = regulator_list_voltage_linear_range,
 177         .map_voltage            = regulator_map_voltage_linear_range,
 178         .set_voltage_sel        = regulator_set_voltage_sel_regmap,
 179         .get_voltage_sel        = regulator_get_voltage_sel_regmap,
 180         .enable                 = regulator_enable_regmap,
 181         .disable                = regulator_disable_regmap,
 182         .is_enabled             = regulator_is_enabled_regmap,
 183         .get_current_limit      = pm800_get_current_limit,
 184 };
 185
 186 static const struct regulator_ops pm800_volt_table_ops = {
 187         .list_voltage           = regulator_list_voltage_table,
 188         .map_voltage            = regulator_map_voltage_iterate,
 189         .set_voltage_sel        = regulator_set_voltage_sel_regmap,
 190         .get_voltage_sel        = regulator_get_voltage_sel_regmap,
 191         .enable                 = regulator_enable_regmap,
 192         .disable                = regulator_disable_regmap,
 193         .is_enabled             = regulator_is_enabled_regmap,
 194         .get_current_limit      = pm800_get_current_limit,
 195 };
 196
 197 /* The array is indexed by id(PM800_ID_XXX) */
 198 static struct pm800_regulator_info pm800_regulator_info[] = {
 199         PM800_BUCK(buck1, BUCK1, BUCK_ENA, 0, 3000000, buck1_volt_range, 0x55),
 200         PM800_BUCK(buck2, BUCK2, BUCK_ENA, 1, 1200000, buck2_5_volt_range, 0x73),
 201         PM800_BUCK(buck3, BUCK3, BUCK_ENA, 2, 1200000, buck2_5_volt_range, 0x73),
 202         PM800_BUCK(buck4, BUCK4, BUCK_ENA, 3, 1200000, buck2_5_volt_range, 0x73),
 203         PM800_BUCK(buck5, BUCK5, BUCK_ENA, 4, 1200000, buck2_5_volt_range, 0x73),
 204
 205         PM800_LDO(ldo1, LDO1, LDO_ENA1_1, 0, 200000, ldo1_volt_table),
 206         PM800_LDO(ldo2, LDO2, LDO_ENA1_1, 1, 10000, ldo2_volt_table),
 207         PM800_LDO(ldo3, LDO3, LDO_ENA1_1, 2, 300000, ldo3_17_volt_table),
 208         PM800_LDO(ldo4, LDO4, LDO_ENA1_1, 3, 300000, ldo3_17_volt_table),
 209         PM800_LDO(ldo5, LDO5, LDO_ENA1_1, 4, 300000, ldo3_17_volt_table),
 210         PM800_LDO(ldo6, LDO6, LDO_ENA1_1, 5, 300000, ldo3_17_volt_table),
 211         PM800_LDO(ldo7, LDO7, LDO_ENA1_1, 6, 300000, ldo3_17_volt_table),
 212         PM800_LDO(ldo8, LDO8, LDO_ENA1_1, 7, 300000, ldo3_17_volt_table),
 213         PM800_LDO(ldo9, LDO9, LDO_ENA1_2, 0, 300000, ldo3_17_volt_table),
 214         PM800_LDO(ldo10, LDO10, LDO_ENA1_2, 1, 300000, ldo3_17_volt_table),
 215         PM800_LDO(ldo11, LDO11, LDO_ENA1_2, 2, 300000, ldo3_17_volt_table),
 216         PM800_LDO(ldo12, LDO12, LDO_ENA1_2, 3, 300000, ldo3_17_volt_table),
 217         PM800_LDO(ldo13, LDO13, LDO_ENA1_2, 4, 300000, ldo3_17_volt_table),
 218         PM800_LDO(ldo14, LDO14, LDO_ENA1_2, 5, 300000, ldo3_17_volt_table),
 219         PM800_LDO(ldo15, LDO15, LDO_ENA1_2, 6, 300000, ldo3_17_volt_table),
 220         PM800_LDO(ldo16, LDO16, LDO_ENA1_2, 7, 300000, ldo3_17_volt_table),
 221         PM800_LDO(ldo17, LDO17, LDO_ENA1_3, 0, 300000, ldo3_17_volt_table),
 222         PM800_LDO(ldo18, LDO18, LDO_ENA1_3, 1, 200000, ldo18_19_volt_table),
 223         PM800_LDO(ldo19, LDO19, LDO_ENA1_3, 2, 200000, ldo18_19_volt_table),
 224 };
 225
 226 static int pm800_regulator_probe(struct platform_device *pdev)
 227 {
 228         struct pm80x_chip *chip = dev_get_drvdata(pdev->dev.parent);
 229         struct pm80x_platform_data *pdata = dev_get_platdata(pdev->dev.parent);
 230         struct regulator_config config = { };
 231         struct regulator_init_data *init_data;
 232         int i, ret;
 233
 234         if (pdata && pdata->num_regulators) {
 235                 unsigned int count = 0;
 236
 237                 /* Check whether num_regulator is valid. */
 238                 for (i = 0; i < ARRAY_SIZE(pdata->regulators); i++) {
 239                         if (pdata->regulators[i])
 240                                 count++;
 241                 }
 242                 if (count != pdata->num_regulators)
 243                         return -EINVAL;
 244         }
 245
 246         config.dev = chip->dev;
 247         config.regmap = chip->subchip->regmap_power;
 248         for (i = 0; i < PM800_ID_RG_MAX; i++) {
 249                 struct regulator_dev *regulator;
 250
 251                 if (pdata && pdata->num_regulators) {
 252                         init_data = pdata->regulators[i];
 253                         if (!init_data)
 254                                 continue;
 255
 256                         config.init_data = init_data;
 257                 }
 258
 259                 config.driver_data = &pm800_regulator_info[i];
 260
 261                 regulator = devm_regulator_register(&pdev->dev,
 262                                 &pm800_regulator_info[i].desc, &config);
 263                 if (IS_ERR(regulator)) {
 264                         ret = PTR_ERR(regulator);
 265                         dev_err(&pdev->dev, "Failed to register %s\n",
 266                                         pm800_regulator_info[i].desc.name);
 267                         return ret;
 268                 }
 269         }
 270
 271         return 0;
 272 }
 273
 274 static struct platform_driver pm800_regulator_driver = {
 275         .driver         = {
 276                 .name   = "88pm80x-regulator",
 277         },
 278         .probe          = pm800_regulator_probe,
 279 };
 280
 281 module_platform_driver(pm800_regulator_driver);
 282
 283 MODULE_LICENSE("GPL");
 284 MODULE_AUTHOR("Joseph(Yossi) Hanin <yhanin@marvell.com>");
 285 MODULE_DESCRIPTION("Regulator Driver for Marvell 88PM800 PMIC");
 286 MODULE_ALIAS("platform:88pm800-regulator");