1 // SPDX-License-Identifier: GPL-2.0-only
3 * Regulator driver for tps65090 power management chip.
5 * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
9 #include <linux/module.h>
10 #include <linux/delay.h>
11 #include <linux/init.h>
13 #include <linux/gpio/consumer.h>
14 #include <linux/slab.h>
15 #include <linux/err.h>
16 #include <linux/platform_device.h>
17 #include <linux/regulator/driver.h>
18 #include <linux/regulator/machine.h>
19 #include <linux/regulator/of_regulator.h>
20 #include <linux/mfd/tps65090.h>
22 #define MAX_CTRL_READ_TRIES 5
23 #define MAX_FET_ENABLE_TRIES 1000
25 #define CTRL_EN_BIT 0 /* Regulator enable bit, active high */
26 #define CTRL_WT_BIT 2 /* Regulator wait time 0 bit */
27 #define CTRL_PG_BIT 4 /* Regulator power good bit, 1=good */
28 #define CTRL_TO_BIT 7 /* Regulator timeout bit, 1=wait */
30 #define MAX_OVERCURRENT_WAIT 3 /* Overcurrent wait must be <= this */
33 * struct tps65090_regulator - Per-regulator data for a tps65090 regulator
35 * @dev: Pointer to our device.
36 * @desc: The struct regulator_desc for the regulator.
37 * @rdev: The struct regulator_dev for the regulator.
38 * @overcurrent_wait_valid: True if overcurrent_wait is valid.
39 * @overcurrent_wait: For FETs, the value to put in the WTFET bitfield.
42 struct tps65090_regulator
{
44 struct regulator_desc
*desc
;
45 struct regulator_dev
*rdev
;
46 bool overcurrent_wait_valid
;
50 static const struct regulator_ops tps65090_ext_control_ops
= {
54 * tps65090_reg_set_overcurrent_wait - Setup overcurrent wait
56 * This will set the overcurrent wait time based on what's in the regulator
59 * @ri: Overall regulator data
60 * @rdev: Regulator device
62 * Return: 0 if no error, non-zero if there was an error writing the register.
64 static int tps65090_reg_set_overcurrent_wait(struct tps65090_regulator
*ri
,
65 struct regulator_dev
*rdev
)
69 ret
= regmap_update_bits(rdev
->regmap
, rdev
->desc
->enable_reg
,
70 MAX_OVERCURRENT_WAIT
<< CTRL_WT_BIT
,
71 ri
->overcurrent_wait
<< CTRL_WT_BIT
);
73 dev_err(&rdev
->dev
, "Error updating overcurrent wait %#x\n",
74 rdev
->desc
->enable_reg
);
81 * tps65090_try_enable_fet - Try to enable a FET
83 * @rdev: Regulator device
85 * Return: 0 if ok, -ENOTRECOVERABLE if the FET power good bit did not get
86 * set, or some other -ve value if another error occurred (e.g. i2c error)
88 static int tps65090_try_enable_fet(struct regulator_dev
*rdev
)
93 ret
= regmap_update_bits(rdev
->regmap
, rdev
->desc
->enable_reg
,
94 rdev
->desc
->enable_mask
,
95 rdev
->desc
->enable_mask
);
97 dev_err(&rdev
->dev
, "Error in updating reg %#x\n",
98 rdev
->desc
->enable_reg
);
102 for (i
= 0; i
< MAX_CTRL_READ_TRIES
; i
++) {
103 ret
= regmap_read(rdev
->regmap
, rdev
->desc
->enable_reg
,
108 if (!(control
& BIT(CTRL_TO_BIT
)))
111 usleep_range(1000, 1500);
113 if (!(control
& BIT(CTRL_PG_BIT
)))
114 return -ENOTRECOVERABLE
;
120 * tps65090_fet_enable - Enable a FET, trying a few times if it fails
122 * Some versions of the tps65090 have issues when turning on the FETs.
123 * This function goes through several steps to ensure the best chance of the
124 * FET going on. Specifically:
125 * - We'll make sure that we bump the "overcurrent wait" to the maximum, which
126 * increases the chances that we'll turn on properly.
127 * - We'll retry turning the FET on multiple times (turning off in between).
129 * @rdev: Regulator device
131 * Return: 0 if ok, non-zero if it fails.
133 static int tps65090_fet_enable(struct regulator_dev
*rdev
)
138 * Try enabling multiple times until we succeed since sometimes the
139 * first try times out.
143 ret
= tps65090_try_enable_fet(rdev
);
146 if (ret
!= -ENOTRECOVERABLE
|| tries
== MAX_FET_ENABLE_TRIES
)
149 /* Try turning the FET off (and then on again) */
150 ret
= regmap_update_bits(rdev
->regmap
, rdev
->desc
->enable_reg
,
151 rdev
->desc
->enable_mask
, 0);
159 dev_warn(&rdev
->dev
, "reg %#x enable ok after %d tries\n",
160 rdev
->desc
->enable_reg
, tries
);
164 dev_warn(&rdev
->dev
, "reg %#x enable failed\n", rdev
->desc
->enable_reg
);
170 static const struct regulator_ops tps65090_reg_control_ops
= {
171 .enable
= regulator_enable_regmap
,
172 .disable
= regulator_disable_regmap
,
173 .is_enabled
= regulator_is_enabled_regmap
,
176 static const struct regulator_ops tps65090_fet_control_ops
= {
177 .enable
= tps65090_fet_enable
,
178 .disable
= regulator_disable_regmap
,
179 .is_enabled
= regulator_is_enabled_regmap
,
182 static const struct regulator_ops tps65090_ldo_ops
= {
185 #define tps65090_REG_DESC(_id, _sname, _en_reg, _en_bits, _nvolt, _volt, _ops) \
187 .name = "TPS65090_RAILS"#_id, \
188 .supply_name = _sname, \
189 .id = TPS65090_REGULATOR_##_id, \
190 .n_voltages = _nvolt, \
193 .enable_reg = _en_reg, \
194 .enable_val = _en_bits, \
195 .enable_mask = _en_bits, \
196 .type = REGULATOR_VOLTAGE, \
197 .owner = THIS_MODULE, \
200 #define tps65090_REG_FIXEDV(_id, _sname, en_reg, _en_bits, _volt, _ops) \
201 tps65090_REG_DESC(_id, _sname, en_reg, _en_bits, 1, _volt, _ops)
203 #define tps65090_REG_SWITCH(_id, _sname, en_reg, _en_bits, _ops) \
204 tps65090_REG_DESC(_id, _sname, en_reg, _en_bits, 0, 0, _ops)
206 static struct regulator_desc tps65090_regulator_desc
[] = {
207 tps65090_REG_FIXEDV(DCDC1
, "vsys1", 0x0C, BIT(CTRL_EN_BIT
), 5000000,
208 tps65090_reg_control_ops
),
209 tps65090_REG_FIXEDV(DCDC2
, "vsys2", 0x0D, BIT(CTRL_EN_BIT
), 3300000,
210 tps65090_reg_control_ops
),
211 tps65090_REG_SWITCH(DCDC3
, "vsys3", 0x0E, BIT(CTRL_EN_BIT
),
212 tps65090_reg_control_ops
),
214 tps65090_REG_SWITCH(FET1
, "infet1", 0x0F,
215 BIT(CTRL_EN_BIT
) | BIT(CTRL_PG_BIT
),
216 tps65090_fet_control_ops
),
217 tps65090_REG_SWITCH(FET2
, "infet2", 0x10,
218 BIT(CTRL_EN_BIT
) | BIT(CTRL_PG_BIT
),
219 tps65090_fet_control_ops
),
220 tps65090_REG_SWITCH(FET3
, "infet3", 0x11,
221 BIT(CTRL_EN_BIT
) | BIT(CTRL_PG_BIT
),
222 tps65090_fet_control_ops
),
223 tps65090_REG_SWITCH(FET4
, "infet4", 0x12,
224 BIT(CTRL_EN_BIT
) | BIT(CTRL_PG_BIT
),
225 tps65090_fet_control_ops
),
226 tps65090_REG_SWITCH(FET5
, "infet5", 0x13,
227 BIT(CTRL_EN_BIT
) | BIT(CTRL_PG_BIT
),
228 tps65090_fet_control_ops
),
229 tps65090_REG_SWITCH(FET6
, "infet6", 0x14,
230 BIT(CTRL_EN_BIT
) | BIT(CTRL_PG_BIT
),
231 tps65090_fet_control_ops
),
232 tps65090_REG_SWITCH(FET7
, "infet7", 0x15,
233 BIT(CTRL_EN_BIT
) | BIT(CTRL_PG_BIT
),
234 tps65090_fet_control_ops
),
236 tps65090_REG_FIXEDV(LDO1
, "vsys-l1", 0, 0, 5000000,
238 tps65090_REG_FIXEDV(LDO2
, "vsys-l2", 0, 0, 3300000,
242 static inline bool is_dcdc(int id
)
245 case TPS65090_REGULATOR_DCDC1
:
246 case TPS65090_REGULATOR_DCDC2
:
247 case TPS65090_REGULATOR_DCDC3
:
254 static int tps65090_config_ext_control(
255 struct tps65090_regulator
*ri
, bool enable
)
258 struct device
*parent
= ri
->dev
->parent
;
259 unsigned int reg_en_reg
= ri
->desc
->enable_reg
;
262 ret
= tps65090_set_bits(parent
, reg_en_reg
, 1);
264 ret
= tps65090_clr_bits(parent
, reg_en_reg
, 1);
266 dev_err(ri
->dev
, "Error in updating reg 0x%x\n", reg_en_reg
);
270 static int tps65090_regulator_disable_ext_control(
271 struct tps65090_regulator
*ri
,
272 struct tps65090_regulator_plat_data
*tps_pdata
)
275 struct device
*parent
= ri
->dev
->parent
;
276 unsigned int reg_en_reg
= ri
->desc
->enable_reg
;
279 * First enable output for internal control if require.
280 * And then disable external control.
282 if (tps_pdata
->reg_init_data
->constraints
.always_on
||
283 tps_pdata
->reg_init_data
->constraints
.boot_on
) {
284 ret
= tps65090_set_bits(parent
, reg_en_reg
, 0);
286 dev_err(ri
->dev
, "Error in set reg 0x%x\n", reg_en_reg
);
290 return tps65090_config_ext_control(ri
, false);
294 static struct of_regulator_match tps65090_matches
[] = {
295 { .name
= "dcdc1", },
296 { .name
= "dcdc2", },
297 { .name
= "dcdc3", },
309 static struct tps65090_platform_data
*tps65090_parse_dt_reg_data(
310 struct platform_device
*pdev
,
311 struct of_regulator_match
**tps65090_reg_matches
)
313 struct tps65090_platform_data
*tps65090_pdata
;
314 struct device_node
*np
= pdev
->dev
.parent
->of_node
;
315 struct device_node
*regulators
;
317 struct tps65090_regulator_plat_data
*reg_pdata
;
319 tps65090_pdata
= devm_kzalloc(&pdev
->dev
, sizeof(*tps65090_pdata
),
322 return ERR_PTR(-ENOMEM
);
324 reg_pdata
= devm_kcalloc(&pdev
->dev
,
325 TPS65090_REGULATOR_MAX
, sizeof(*reg_pdata
),
328 return ERR_PTR(-ENOMEM
);
330 regulators
= of_get_child_by_name(np
, "regulators");
332 dev_err(&pdev
->dev
, "regulator node not found\n");
333 return ERR_PTR(-ENODEV
);
336 ret
= of_regulator_match(&pdev
->dev
, regulators
, tps65090_matches
,
337 ARRAY_SIZE(tps65090_matches
));
338 of_node_put(regulators
);
341 "Error parsing regulator init data: %d\n", ret
);
345 *tps65090_reg_matches
= tps65090_matches
;
346 for (idx
= 0; idx
< ARRAY_SIZE(tps65090_matches
); idx
++) {
347 struct regulator_init_data
*ri_data
;
348 struct tps65090_regulator_plat_data
*rpdata
;
349 struct device_node
*np
;
351 rpdata
= ®_pdata
[idx
];
352 ri_data
= tps65090_matches
[idx
].init_data
;
356 np
= tps65090_matches
[idx
].of_node
;
360 rpdata
->reg_init_data
= ri_data
;
361 rpdata
->enable_ext_control
= of_property_read_bool(np
,
362 "ti,enable-ext-control");
363 if (rpdata
->enable_ext_control
) {
364 enum gpiod_flags gflags
;
366 if (ri_data
->constraints
.always_on
||
367 ri_data
->constraints
.boot_on
)
368 gflags
= GPIOD_OUT_HIGH
;
370 gflags
= GPIOD_OUT_LOW
;
371 gflags
|= GPIOD_FLAGS_BIT_NONEXCLUSIVE
;
373 rpdata
->gpiod
= devm_fwnode_gpiod_get(
375 of_fwnode_handle(np
),
379 if (PTR_ERR(rpdata
->gpiod
) == -ENOENT
) {
381 "could not find DCDC external control GPIO\n");
382 rpdata
->gpiod
= NULL
;
383 } else if (IS_ERR(rpdata
->gpiod
))
384 return ERR_CAST(rpdata
->gpiod
);
387 if (of_property_read_u32(np
, "ti,overcurrent-wait",
388 &rpdata
->overcurrent_wait
) == 0)
389 rpdata
->overcurrent_wait_valid
= true;
391 tps65090_pdata
->reg_pdata
[idx
] = rpdata
;
393 return tps65090_pdata
;
396 static inline struct tps65090_platform_data
*tps65090_parse_dt_reg_data(
397 struct platform_device
*pdev
,
398 struct of_regulator_match
**tps65090_reg_matches
)
400 *tps65090_reg_matches
= NULL
;
405 static int tps65090_regulator_probe(struct platform_device
*pdev
)
407 struct tps65090
*tps65090_mfd
= dev_get_drvdata(pdev
->dev
.parent
);
408 struct tps65090_regulator
*ri
= NULL
;
409 struct regulator_config config
= { };
410 struct regulator_dev
*rdev
;
411 struct tps65090_regulator_plat_data
*tps_pdata
;
412 struct tps65090_regulator
*pmic
;
413 struct tps65090_platform_data
*tps65090_pdata
;
414 struct of_regulator_match
*tps65090_reg_matches
= NULL
;
418 dev_dbg(&pdev
->dev
, "Probing regulator\n");
420 tps65090_pdata
= dev_get_platdata(pdev
->dev
.parent
);
421 if (!tps65090_pdata
&& tps65090_mfd
->dev
->of_node
)
422 tps65090_pdata
= tps65090_parse_dt_reg_data(pdev
,
423 &tps65090_reg_matches
);
424 if (IS_ERR_OR_NULL(tps65090_pdata
)) {
425 dev_err(&pdev
->dev
, "Platform data missing\n");
426 return tps65090_pdata
? PTR_ERR(tps65090_pdata
) : -EINVAL
;
429 pmic
= devm_kcalloc(&pdev
->dev
,
430 TPS65090_REGULATOR_MAX
, sizeof(*pmic
),
435 for (num
= 0; num
< TPS65090_REGULATOR_MAX
; num
++) {
436 tps_pdata
= tps65090_pdata
->reg_pdata
[num
];
439 ri
->dev
= &pdev
->dev
;
440 ri
->desc
= &tps65090_regulator_desc
[num
];
442 ri
->overcurrent_wait_valid
=
443 tps_pdata
->overcurrent_wait_valid
;
444 ri
->overcurrent_wait
= tps_pdata
->overcurrent_wait
;
448 * TPS5090 DCDC support the control from external digital input.
449 * Configure it as per platform data.
451 if (tps_pdata
&& is_dcdc(num
) && tps_pdata
->reg_init_data
) {
452 if (tps_pdata
->enable_ext_control
) {
453 config
.ena_gpiod
= tps_pdata
->gpiod
;
454 ri
->desc
->ops
= &tps65090_ext_control_ops
;
456 ret
= tps65090_regulator_disable_ext_control(
460 "failed disable ext control\n");
466 config
.dev
= pdev
->dev
.parent
;
467 config
.driver_data
= ri
;
468 config
.regmap
= tps65090_mfd
->rmap
;
470 config
.init_data
= tps_pdata
->reg_init_data
;
472 config
.init_data
= NULL
;
473 if (tps65090_reg_matches
)
474 config
.of_node
= tps65090_reg_matches
[num
].of_node
;
476 config
.of_node
= NULL
;
479 * Hand the GPIO descriptor management over to the regulator
480 * core, remove it from devres management.
482 if (config
.ena_gpiod
)
483 devm_gpiod_unhinge(&pdev
->dev
, config
.ena_gpiod
);
484 rdev
= devm_regulator_register(&pdev
->dev
, ri
->desc
, &config
);
486 dev_err(&pdev
->dev
, "failed to register regulator %s\n",
488 return PTR_ERR(rdev
);
492 if (ri
->overcurrent_wait_valid
) {
493 ret
= tps65090_reg_set_overcurrent_wait(ri
, rdev
);
498 /* Enable external control if it is require */
499 if (tps_pdata
&& is_dcdc(num
) && tps_pdata
->reg_init_data
&&
500 tps_pdata
->enable_ext_control
) {
501 ret
= tps65090_config_ext_control(ri
, true);
507 platform_set_drvdata(pdev
, pmic
);
511 static struct platform_driver tps65090_regulator_driver
= {
513 .name
= "tps65090-pmic",
515 .probe
= tps65090_regulator_probe
,
518 static int __init
tps65090_regulator_init(void)
520 return platform_driver_register(&tps65090_regulator_driver
);
522 subsys_initcall(tps65090_regulator_init
);
524 static void __exit
tps65090_regulator_exit(void)
526 platform_driver_unregister(&tps65090_regulator_driver
);
528 module_exit(tps65090_regulator_exit
);
530 MODULE_DESCRIPTION("tps65090 regulator driver");
531 MODULE_AUTHOR("Venu Byravarasu <vbyravarasu@nvidia.com>");
532 MODULE_LICENSE("GPL v2");
533 MODULE_ALIAS("platform:tps65090-pmic");