drivers/scsi/libsas/sas_host_smp.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Serial Attached SCSI (SAS) Expander discovery and configuration
   4  *
   5  * Copyright (C) 2007 James E.J. Bottomley
   6  *              <James.Bottomley@HansenPartnership.com>
   7  */
   8 #include <linux/scatterlist.h>
   9 #include <linux/blkdev.h>
  10 #include <linux/slab.h>
  11 #include <linux/export.h>
  12
  13 #include "sas_internal.h"
  14
  15 #include <scsi/scsi_transport.h>
  16 #include <scsi/scsi_transport_sas.h>
  17 #include "../scsi_sas_internal.h"
  18
  19 static void sas_host_smp_discover(struct sas_ha_struct *sas_ha, u8 *resp_data,
  20                                   u8 phy_id)
  21 {
  22         struct sas_phy *phy;
  23         struct sas_rphy *rphy;
  24
  25         if (phy_id >= sas_ha->num_phys) {
  26                 resp_data[2] = SMP_RESP_NO_PHY;
  27                 return;
  28         }
  29         resp_data[2] = SMP_RESP_FUNC_ACC;
  30
  31         phy = sas_ha->sas_phy[phy_id]->phy;
  32         resp_data[9] = phy_id;
  33         resp_data[13] = phy->negotiated_linkrate;
  34         memcpy(resp_data + 16, sas_ha->sas_addr, SAS_ADDR_SIZE);
  35         memcpy(resp_data + 24, sas_ha->sas_phy[phy_id]->attached_sas_addr,
  36                SAS_ADDR_SIZE);
  37         resp_data[40] = (phy->minimum_linkrate << 4) |
  38                 phy->minimum_linkrate_hw;
  39         resp_data[41] = (phy->maximum_linkrate << 4) |
  40                 phy->maximum_linkrate_hw;
  41
  42         if (!sas_ha->sas_phy[phy_id]->port ||
  43             !sas_ha->sas_phy[phy_id]->port->port_dev)
  44                 return;
  45
  46         rphy = sas_ha->sas_phy[phy_id]->port->port_dev->rphy;
  47         resp_data[12] = rphy->identify.device_type << 4;
  48         resp_data[14] = rphy->identify.initiator_port_protocols;
  49         resp_data[15] = rphy->identify.target_port_protocols;
  50 }
  51
  52 /**
  53  * to_sas_gpio_gp_bit - given the gpio frame data find the byte/bit position of 'od'
  54  * @od: od bit to find
  55  * @data: incoming bitstream (from frame)
  56  * @index: requested data register index (from frame)
  57  * @count: total number of registers in the bitstream (from frame)
  58  * @bit: bit position of 'od' in the returned byte
  59  *
  60  * returns NULL if 'od' is not in 'data'
  61  *
  62  * From SFF-8485 v0.7:
  63  * "In GPIO_TX[1], bit 0 of byte 3 contains the first bit (i.e., OD0.0)
  64  *  and bit 7 of byte 0 contains the 32nd bit (i.e., OD10.1).
  65  *
  66  *  In GPIO_TX[2], bit 0 of byte 3 contains the 33rd bit (i.e., OD10.2)
  67  *  and bit 7 of byte 0 contains the 64th bit (i.e., OD21.0)."
  68  *
  69  * The general-purpose (raw-bitstream) RX registers have the same layout
  70  * although 'od' is renamed 'id' for 'input data'.
  71  *
  72  * SFF-8489 defines the behavior of the LEDs in response to the 'od' values.
  73  */
  74 static u8 *to_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count, u8 *bit)
  75 {
  76         unsigned int reg;
  77         u8 byte;
  78
  79         /* gp registers start at index 1 */
  80         if (index == 0)
  81                 return NULL;
  82
  83         index--; /* make index 0-based */
  84         if (od < index * 32)
  85                 return NULL;
  86
  87         od -= index * 32;
  88         reg = od >> 5;
  89
  90         if (reg >= count)
  91                 return NULL;
  92
  93         od &= (1 << 5) - 1;
  94         byte = 3 - (od >> 3);
  95         *bit = od & ((1 << 3) - 1);
  96
  97         return &data[reg * 4 + byte];
  98 }
  99
 100 int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count)
 101 {
 102         u8 *byte;
 103         u8 bit;
 104
 105         byte = to_sas_gpio_gp_bit(od, data, index, count, &bit);
 106         if (!byte)
 107                 return -1;
 108
 109         return (*byte >> bit) & 1;
 110 }
 111 EXPORT_SYMBOL(try_test_sas_gpio_gp_bit);
 112
 113 static int sas_host_smp_write_gpio(struct sas_ha_struct *sas_ha, u8 *resp_data,
 114                                    u8 reg_type, u8 reg_index, u8 reg_count,
 115                                    u8 *req_data)
 116 {
 117         struct sas_internal *i = to_sas_internal(sas_ha->core.shost->transportt);
 118         int written;
 119
 120         if (i->dft->lldd_write_gpio == NULL) {
 121                 resp_data[2] = SMP_RESP_FUNC_UNK;
 122                 return 0;
 123         }
 124
 125         written = i->dft->lldd_write_gpio(sas_ha, reg_type, reg_index,
 126                                           reg_count, req_data);
 127
 128         if (written < 0) {
 129                 resp_data[2] = SMP_RESP_FUNC_FAILED;
 130                 written = 0;
 131         } else
 132                 resp_data[2] = SMP_RESP_FUNC_ACC;
 133
 134         return written;
 135 }
 136
 137 static void sas_report_phy_sata(struct sas_ha_struct *sas_ha, u8 *resp_data,
 138                                 u8 phy_id)
 139 {
 140         struct sas_rphy *rphy;
 141         struct dev_to_host_fis *fis;
 142         int i;
 143
 144         if (phy_id >= sas_ha->num_phys) {
 145                 resp_data[2] = SMP_RESP_NO_PHY;
 146                 return;
 147         }
 148
 149         resp_data[2] = SMP_RESP_PHY_NO_SATA;
 150
 151         if (!sas_ha->sas_phy[phy_id]->port)
 152                 return;
 153
 154         rphy = sas_ha->sas_phy[phy_id]->port->port_dev->rphy;
 155         fis = (struct dev_to_host_fis *)
 156                 sas_ha->sas_phy[phy_id]->port->port_dev->frame_rcvd;
 157         if (rphy->identify.target_port_protocols != SAS_PROTOCOL_SATA)
 158                 return;
 159
 160         resp_data[2] = SMP_RESP_FUNC_ACC;
 161         resp_data[9] = phy_id;
 162         memcpy(resp_data + 16, sas_ha->sas_phy[phy_id]->attached_sas_addr,
 163                SAS_ADDR_SIZE);
 164
 165         /* check to see if we have a valid d2h fis */
 166         if (fis->fis_type != 0x34)
 167                 return;
 168
 169         /* the d2h fis is required by the standard to be in LE format */
 170         for (i = 0; i < 20; i += 4) {
 171                 u8 *dst = resp_data + 24 + i, *src =
 172                         &sas_ha->sas_phy[phy_id]->port->port_dev->frame_rcvd[i];
 173                 dst[0] = src[3];
 174                 dst[1] = src[2];
 175                 dst[2] = src[1];
 176                 dst[3] = src[0];
 177         }
 178 }
 179
 180 static void sas_phy_control(struct sas_ha_struct *sas_ha, u8 phy_id,
 181                             u8 phy_op, enum sas_linkrate min,
 182                             enum sas_linkrate max, u8 *resp_data)
 183 {
 184         struct sas_internal *i =
 185                 to_sas_internal(sas_ha->core.shost->transportt);
 186         struct sas_phy_linkrates rates;
 187         struct asd_sas_phy *asd_phy;
 188
 189         if (phy_id >= sas_ha->num_phys) {
 190                 resp_data[2] = SMP_RESP_NO_PHY;
 191                 return;
 192         }
 193
 194         asd_phy = sas_ha->sas_phy[phy_id];
 195         switch (phy_op) {
 196         case PHY_FUNC_NOP:
 197         case PHY_FUNC_LINK_RESET:
 198         case PHY_FUNC_HARD_RESET:
 199         case PHY_FUNC_DISABLE:
 200         case PHY_FUNC_CLEAR_ERROR_LOG:
 201         case PHY_FUNC_CLEAR_AFFIL:
 202         case PHY_FUNC_TX_SATA_PS_SIGNAL:
 203                 break;
 204
 205         default:
 206                 resp_data[2] = SMP_RESP_PHY_UNK_OP;
 207                 return;
 208         }
 209
 210         rates.minimum_linkrate = min;
 211         rates.maximum_linkrate = max;
 212
 213         /* filter reset requests through libata eh */
 214         if (phy_op == PHY_FUNC_LINK_RESET && sas_try_ata_reset(asd_phy) == 0) {
 215                 resp_data[2] = SMP_RESP_FUNC_ACC;
 216                 return;
 217         }
 218
 219         if (i->dft->lldd_control_phy(asd_phy, phy_op, &rates))
 220                 resp_data[2] = SMP_RESP_FUNC_FAILED;
 221         else
 222                 resp_data[2] = SMP_RESP_FUNC_ACC;
 223 }
 224
 225 void sas_smp_host_handler(struct bsg_job *job, struct Scsi_Host *shost)
 226 {
 227         struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
 228         u8 *req_data, *resp_data;
 229         unsigned int reslen = 0;
 230         int error = -EINVAL;
 231
 232         /* eight is the minimum size for request and response frames */
 233         if (job->request_payload.payload_len < 8 ||
 234             job->reply_payload.payload_len < 8)
 235                 goto out;
 236
 237         error = -ENOMEM;
 238         req_data = kzalloc(job->request_payload.payload_len, GFP_KERNEL);
 239         if (!req_data)
 240                 goto out;
 241         sg_copy_to_buffer(job->request_payload.sg_list,
 242                           job->request_payload.sg_cnt, req_data,
 243                           job->request_payload.payload_len);
 244
 245         /* make sure frame can always be built ... we copy
 246          * back only the requested length */
 247         resp_data = kzalloc(max(job->reply_payload.payload_len, 128U),
 248                         GFP_KERNEL);
 249         if (!resp_data)
 250                 goto out_free_req;
 251
 252         error = -EINVAL;
 253         if (req_data[0] != SMP_REQUEST)
 254                 goto out_free_resp;
 255
 256         /* set up default don't know response */
 257         resp_data[0] = SMP_RESPONSE;
 258         resp_data[1] = req_data[1];
 259         resp_data[2] = SMP_RESP_FUNC_UNK;
 260
 261         switch (req_data[1]) {
 262         case SMP_REPORT_GENERAL:
 263                 resp_data[2] = SMP_RESP_FUNC_ACC;
 264                 resp_data[9] = sas_ha->num_phys;
 265                 reslen = 32;
 266                 break;
 267
 268         case SMP_REPORT_MANUF_INFO:
 269                 resp_data[2] = SMP_RESP_FUNC_ACC;
 270                 memcpy(resp_data + 12, shost->hostt->name,
 271                        SAS_EXPANDER_VENDOR_ID_LEN);
 272                 memcpy(resp_data + 20, "libsas virt phy",
 273                        SAS_EXPANDER_PRODUCT_ID_LEN);
 274                 reslen = 64;
 275                 break;
 276
 277         case SMP_READ_GPIO_REG:
 278                 /* FIXME: need GPIO support in the transport class */
 279                 break;
 280
 281         case SMP_DISCOVER:
 282                 if (job->request_payload.payload_len < 16)
 283                         goto out_free_resp;
 284                 sas_host_smp_discover(sas_ha, resp_data, req_data[9]);
 285                 reslen = 56;
 286                 break;
 287
 288         case SMP_REPORT_PHY_ERR_LOG:
 289                 /* FIXME: could implement this with additional
 290                  * libsas callbacks providing the HW supports it */
 291                 break;
 292
 293         case SMP_REPORT_PHY_SATA:
 294                 if (job->request_payload.payload_len < 16)
 295                         goto out_free_resp;
 296                 sas_report_phy_sata(sas_ha, resp_data, req_data[9]);
 297                 reslen = 60;
 298                 break;
 299
 300         case SMP_REPORT_ROUTE_INFO:
 301                 /* Can't implement; hosts have no routes */
 302                 break;
 303
 304         case SMP_WRITE_GPIO_REG: {
 305                 /* SFF-8485 v0.7 */
 306                 const int base_frame_size = 11;
 307                 int to_write = req_data[4];
 308
 309                 if (job->request_payload.payload_len <
 310                                 base_frame_size + to_write * 4) {
 311                         resp_data[2] = SMP_RESP_INV_FRM_LEN;
 312                         break;
 313                 }
 314
 315                 to_write = sas_host_smp_write_gpio(sas_ha, resp_data, req_data[2],
 316                                                    req_data[3], to_write, &req_data[8]);
 317                 reslen = 8;
 318                 break;
 319         }
 320
 321         case SMP_CONF_ROUTE_INFO:
 322                 /* Can't implement; hosts have no routes */
 323                 break;
 324
 325         case SMP_PHY_CONTROL:
 326                 if (job->request_payload.payload_len < 44)
 327                         goto out_free_resp;
 328                 sas_phy_control(sas_ha, req_data[9], req_data[10],
 329                                 req_data[32] >> 4, req_data[33] >> 4,
 330                                 resp_data);
 331                 reslen = 8;
 332                 break;
 333
 334         case SMP_PHY_TEST_FUNCTION:
 335                 /* FIXME: should this be implemented? */
 336                 break;
 337
 338         default:
 339                 /* probably a 2.0 function */
 340                 break;
 341         }
 342
 343         sg_copy_from_buffer(job->reply_payload.sg_list,
 344                             job->reply_payload.sg_cnt, resp_data,
 345                             job->reply_payload.payload_len);
 346
 347         error = 0;
 348 out_free_resp:
 349         kfree(resp_data);
 350 out_free_req:
 351         kfree(req_data);
 352 out:
 353         bsg_job_done(job, error, reslen);
 354 }