?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block
[linux/fpc-iii.git] / drivers / scsi / lpfc / lpfc.h
bloba54c8da30273ba47c00c7ddd7a22f08734ed62e3
1 /*******************************************************************
2 * This file is part of the Emulex Linux Device Driver for *
3 * Fibre Channel Host Bus Adapters. *
4 * Copyright (C) 2017-2020 Broadcom. All Rights Reserved. The term *
5 * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. *
6 * Copyright (C) 2004-2016 Emulex. All rights reserved. *
7 * EMULEX and SLI are trademarks of Emulex. *
8 * www.broadcom.com *
9 * Portions Copyright (C) 2004-2005 Christoph Hellwig *
10 * *
11 * This program is free software; you can redistribute it and/or *
12 * modify it under the terms of version 2 of the GNU General *
13 * Public License as published by the Free Software Foundation. *
14 * This program is distributed in the hope that it will be useful. *
15 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
16 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
17 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
18 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
19 * TO BE LEGALLY INVALID. See the GNU General Public License for *
20 * more details, a copy of which can be found in the file COPYING *
21 * included with this package. *
22 *******************************************************************/
23
24 #include <scsi/scsi_host.h>
25 #include <linux/ktime.h>
26 #include <linux/workqueue.h>
27
28 #if defined(CONFIG_DEBUG_FS) && !defined(CONFIG_SCSI_LPFC_DEBUG_FS)
29 #define CONFIG_SCSI_LPFC_DEBUG_FS
30 #endif
31
32 struct lpfc_sli2_slim;
33
34 #define ELX_MODEL_NAME_SIZE 80
35
36 #define LPFC_PCI_DEV_LP 0x1
37 #define LPFC_PCI_DEV_OC 0x2
38
39 #define LPFC_SLI_REV2 2
40 #define LPFC_SLI_REV3 3
41 #define LPFC_SLI_REV4 4
42
43 #define LPFC_MAX_TARGET 4096 /* max number of targets supported */
44 #define LPFC_MAX_DISC_THREADS 64 /* max outstanding discovery els
45 requests */
46 #define LPFC_MAX_NS_RETRY 3 /* Number of retry attempts to contact
47 the NameServer before giving up. */
48 #define LPFC_CMD_PER_LUN 3 /* max outstanding cmds per lun */
49 #define LPFC_DEFAULT_SG_SEG_CNT 64 /* sg element count per scsi cmnd */
50 #define LPFC_DEFAULT_MENLO_SG_SEG_CNT 128 /* sg element count per scsi
51 cmnd for menlo needs nearly twice as for firmware
52 downloads using bsg */
53
54 #define LPFC_DEFAULT_XPSGL_SIZE 256
55 #define LPFC_MAX_SG_TABLESIZE 0xffff
56 #define LPFC_MIN_SG_SLI4_BUF_SZ 0x800 /* based on LPFC_DEFAULT_SG_SEG_CNT */
57 #define LPFC_MAX_BG_SLI4_SEG_CNT_DIF 128 /* sg element count for BlockGuard */
58 #define LPFC_MAX_SG_SEG_CNT_DIF 512 /* sg element count per scsi cmnd */
59 #define LPFC_MAX_SG_SEG_CNT 4096 /* sg element count per scsi cmnd */
60 #define LPFC_MIN_SG_SEG_CNT 32 /* sg element count per scsi cmnd */
61 #define LPFC_MAX_SGL_SEG_CNT 512 /* SGL element count per scsi cmnd */
62 #define LPFC_MAX_BPL_SEG_CNT 4096 /* BPL element count per scsi cmnd */
63 #define LPFC_MAX_NVME_SEG_CNT 256 /* max SGL element cnt per NVME cmnd */
64
65 #define LPFC_MAX_SGE_SIZE 0x80000000 /* Maximum data allowed in a SGE */
66 #define LPFC_IOCB_LIST_CNT 2250 /* list of IOCBs for fast-path usage. */
67 #define LPFC_Q_RAMP_UP_INTERVAL 120 /* lun q_depth ramp up interval */
68 #define LPFC_VNAME_LEN 100 /* vport symbolic name length */
69 #define LPFC_TGTQ_RAMPUP_PCENT 5 /* Target queue rampup in percentage */
70 #define LPFC_MIN_TGT_QDEPTH 10
71 #define LPFC_MAX_TGT_QDEPTH 0xFFFF
72
73 #define LPFC_MAX_BUCKET_COUNT 20 /* Maximum no. of buckets for stat data
74 collection. */
75 /*
76 * Following time intervals are used of adjusting SCSI device
77 * queue depths when there are driver resource error or Firmware
78 * resource error.
79 */
80 /* 1 Second */
81 #define QUEUE_RAMP_DOWN_INTERVAL (msecs_to_jiffies(1000 * 1))
82
83 /* Number of exchanges reserved for discovery to complete */
84 #define LPFC_DISC_IOCB_BUFF_COUNT 20
85
86 #define LPFC_HB_MBOX_INTERVAL 5 /* Heart beat interval in seconds. */
87 #define LPFC_HB_MBOX_TIMEOUT 30 /* Heart beat timeout in seconds. */
88
89 /* Error Attention event polling interval */
90 #define LPFC_ERATT_POLL_INTERVAL 5 /* EATT poll interval in seconds */
91
92 /* Define macros for 64 bit support */
93 #define putPaddrLow(addr) ((uint32_t) (0xffffffff & (u64)(addr)))
94 #define putPaddrHigh(addr) ((uint32_t) (0xffffffff & (((u64)(addr))>>32)))
95 #define getPaddr(high, low) ((dma_addr_t)( \
96 (( (u64)(high)<<16 ) << 16)|( (u64)(low))))
97 /* Provide maximum configuration definitions. */
98 #define LPFC_DRVR_TIMEOUT 16 /* driver iocb timeout value in sec */
99 #define FC_MAX_ADPTMSG 64
100
101 #define MAX_HBAEVT 32
102 #define MAX_HBAS_NO_RESET 16
103
104 /* Number of MSI-X vectors the driver uses */
105 #define LPFC_MSIX_VECTORS 2
106
107 /* lpfc wait event data ready flag */
108 #define LPFC_DATA_READY 0 /* bit 0 */
109
110 /* queue dump line buffer size */
111 #define LPFC_LBUF_SZ 128
112
113 /* mailbox system shutdown options */
114 #define LPFC_MBX_NO_WAIT 0
115 #define LPFC_MBX_WAIT 1
116
117 enum lpfc_polling_flags {
118 ENABLE_FCP_RING_POLLING = 0x1,
119 DISABLE_FCP_RING_INT = 0x2
120 };
121
122 struct perf_prof {
123 uint16_t cmd_cpu[40];
124 uint16_t rsp_cpu[40];
125 uint16_t qh_cpu[40];
126 uint16_t wqidx[40];
127 };
128
129 /*
130 * Provide for FC4 TYPE x28 - NVME. The
131 * bit mask for FCP and NVME is 0x8 identically
132 * because they are 32 bit positions distance.
133 */
134 #define LPFC_FC4_TYPE_BITMASK 0x00000100
135
136 /* Provide DMA memory definitions the driver uses per port instance. */
137 struct lpfc_dmabuf {
138 struct list_head list;
139 void *virt; /* virtual address ptr */
140 dma_addr_t phys; /* mapped address */
141 uint32_t buffer_tag; /* used for tagged queue ring */
142 };
143
144 struct lpfc_nvmet_ctxbuf {
145 struct list_head list;
146 struct lpfc_async_xchg_ctx *context;
147 struct lpfc_iocbq *iocbq;
148 struct lpfc_sglq *sglq;
149 struct work_struct defer_work;
150 };
151
152 struct lpfc_dma_pool {
153 struct lpfc_dmabuf *elements;
154 uint32_t max_count;
155 uint32_t current_count;
156 };
157
158 struct hbq_dmabuf {
159 struct lpfc_dmabuf hbuf;
160 struct lpfc_dmabuf dbuf;
161 uint16_t total_size;
162 uint16_t bytes_recv;
163 uint32_t tag;
164 struct lpfc_cq_event cq_event;
165 unsigned long time_stamp;
166 void *context;
167 };
168
169 struct rqb_dmabuf {
170 struct lpfc_dmabuf hbuf;
171 struct lpfc_dmabuf dbuf;
172 uint16_t total_size;
173 uint16_t bytes_recv;
174 uint16_t idx;
175 struct lpfc_queue *hrq; /* ptr to associated Header RQ */
176 struct lpfc_queue *drq; /* ptr to associated Data RQ */
177 };
178
179 /* Priority bit. Set value to exceed low water mark in lpfc_mem. */
180 #define MEM_PRI 0x100
181
182
183 /****************************************************************************/
184 /* Device VPD save area */
185 /****************************************************************************/
186 typedef struct lpfc_vpd {
187 uint32_t status; /* vpd status value */
188 uint32_t length; /* number of bytes actually returned */
189 struct {
190 uint32_t rsvd1; /* Revision numbers */
191 uint32_t biuRev;
192 uint32_t smRev;
193 uint32_t smFwRev;
194 uint32_t endecRev;
195 uint16_t rBit;
196 uint8_t fcphHigh;
197 uint8_t fcphLow;
198 uint8_t feaLevelHigh;
199 uint8_t feaLevelLow;
200 uint32_t postKernRev;
201 uint32_t opFwRev;
202 uint8_t opFwName[16];
203 uint32_t sli1FwRev;
204 uint8_t sli1FwName[16];
205 uint32_t sli2FwRev;
206 uint8_t sli2FwName[16];
207 } rev;
208 struct {
209 #ifdef __BIG_ENDIAN_BITFIELD
210 uint32_t rsvd3 :20; /* Reserved */
211 uint32_t rsvd2 : 3; /* Reserved */
212 uint32_t cbg : 1; /* Configure BlockGuard */
213 uint32_t cmv : 1; /* Configure Max VPIs */
214 uint32_t ccrp : 1; /* Config Command Ring Polling */
215 uint32_t csah : 1; /* Configure Synchronous Abort Handling */
216 uint32_t chbs : 1; /* Cofigure Host Backing store */
217 uint32_t cinb : 1; /* Enable Interrupt Notification Block */
218 uint32_t cerbm : 1; /* Configure Enhanced Receive Buf Mgmt */
219 uint32_t cmx : 1; /* Configure Max XRIs */
220 uint32_t cmr : 1; /* Configure Max RPIs */
221 #else /* __LITTLE_ENDIAN */
222 uint32_t cmr : 1; /* Configure Max RPIs */
223 uint32_t cmx : 1; /* Configure Max XRIs */
224 uint32_t cerbm : 1; /* Configure Enhanced Receive Buf Mgmt */
225 uint32_t cinb : 1; /* Enable Interrupt Notification Block */
226 uint32_t chbs : 1; /* Cofigure Host Backing store */
227 uint32_t csah : 1; /* Configure Synchronous Abort Handling */
228 uint32_t ccrp : 1; /* Config Command Ring Polling */
229 uint32_t cmv : 1; /* Configure Max VPIs */
230 uint32_t cbg : 1; /* Configure BlockGuard */
231 uint32_t rsvd2 : 3; /* Reserved */
232 uint32_t rsvd3 :20; /* Reserved */
233 #endif
234 } sli3Feat;
235 } lpfc_vpd_t;
236
237
238 /*
239 * lpfc stat counters
240 */
241 struct lpfc_stats {
242 /* Statistics for ELS commands */
243 uint32_t elsLogiCol;
244 uint32_t elsRetryExceeded;
245 uint32_t elsXmitRetry;
246 uint32_t elsDelayRetry;
247 uint32_t elsRcvDrop;
248 uint32_t elsRcvFrame;
249 uint32_t elsRcvRSCN;
250 uint32_t elsRcvRNID;
251 uint32_t elsRcvFARP;
252 uint32_t elsRcvFARPR;
253 uint32_t elsRcvFLOGI;
254 uint32_t elsRcvPLOGI;
255 uint32_t elsRcvADISC;
256 uint32_t elsRcvPDISC;
257 uint32_t elsRcvFAN;
258 uint32_t elsRcvLOGO;
259 uint32_t elsRcvPRLO;
260 uint32_t elsRcvPRLI;
261 uint32_t elsRcvLIRR;
262 uint32_t elsRcvRLS;
263 uint32_t elsRcvRPL;
264 uint32_t elsRcvRRQ;
265 uint32_t elsRcvRTV;
266 uint32_t elsRcvECHO;
267 uint32_t elsRcvLCB;
268 uint32_t elsRcvRDP;
269 uint32_t elsXmitFLOGI;
270 uint32_t elsXmitFDISC;
271 uint32_t elsXmitPLOGI;
272 uint32_t elsXmitPRLI;
273 uint32_t elsXmitADISC;
274 uint32_t elsXmitLOGO;
275 uint32_t elsXmitSCR;
276 uint32_t elsXmitRSCN;
277 uint32_t elsXmitRNID;
278 uint32_t elsXmitFARP;
279 uint32_t elsXmitFARPR;
280 uint32_t elsXmitACC;
281 uint32_t elsXmitLSRJT;
282
283 uint32_t frameRcvBcast;
284 uint32_t frameRcvMulti;
285 uint32_t strayXmitCmpl;
286 uint32_t frameXmitDelay;
287 uint32_t xriCmdCmpl;
288 uint32_t xriStatErr;
289 uint32_t LinkUp;
290 uint32_t LinkDown;
291 uint32_t LinkMultiEvent;
292 uint32_t NoRcvBuf;
293 uint32_t fcpCmd;
294 uint32_t fcpCmpl;
295 uint32_t fcpRspErr;
296 uint32_t fcpRemoteStop;
297 uint32_t fcpPortRjt;
298 uint32_t fcpPortBusy;
299 uint32_t fcpError;
300 uint32_t fcpLocalErr;
301 };
302
303 struct lpfc_hba;
304
305
306 enum discovery_state {
307 LPFC_VPORT_UNKNOWN = 0, /* vport state is unknown */
308 LPFC_VPORT_FAILED = 1, /* vport has failed */
309 LPFC_LOCAL_CFG_LINK = 6, /* local NPORT Id configured */
310 LPFC_FLOGI = 7, /* FLOGI sent to Fabric */
311 LPFC_FDISC = 8, /* FDISC sent for vport */
312 LPFC_FABRIC_CFG_LINK = 9, /* Fabric assigned NPORT Id
313 * configured */
314 LPFC_NS_REG = 10, /* Register with NameServer */
315 LPFC_NS_QRY = 11, /* Query NameServer for NPort ID list */
316 LPFC_BUILD_DISC_LIST = 12, /* Build ADISC and PLOGI lists for
317 * device authentication / discovery */
318 LPFC_DISC_AUTH = 13, /* Processing ADISC list */
319 LPFC_VPORT_READY = 32,
320 };
321
322 enum hba_state {
323 LPFC_LINK_UNKNOWN = 0, /* HBA state is unknown */
324 LPFC_WARM_START = 1, /* HBA state after selective reset */
325 LPFC_INIT_START = 2, /* Initial state after board reset */
326 LPFC_INIT_MBX_CMDS = 3, /* Initialize HBA with mbox commands */
327 LPFC_LINK_DOWN = 4, /* HBA initialized, link is down */
328 LPFC_LINK_UP = 5, /* Link is up - issue READ_LA */
329 LPFC_CLEAR_LA = 6, /* authentication cmplt - issue
330 * CLEAR_LA */
331 LPFC_HBA_READY = 32,
332 LPFC_HBA_ERROR = -1
333 };
334
335 struct lpfc_trunk_link_state {
336 enum hba_state state;
337 uint8_t fault;
338 };
339
340 struct lpfc_trunk_link {
341 struct lpfc_trunk_link_state link0,
342 link1,
343 link2,
344 link3;
345 };
346
347 struct lpfc_vport {
348 struct lpfc_hba *phba;
349 struct list_head listentry;
350 uint8_t port_type;
351 #define LPFC_PHYSICAL_PORT 1
352 #define LPFC_NPIV_PORT 2
353 #define LPFC_FABRIC_PORT 3
354 enum discovery_state port_state;
355
356 uint16_t vpi;
357 uint16_t vfi;
358 uint8_t vpi_state;
359 #define LPFC_VPI_REGISTERED 0x1
360
361 uint32_t fc_flag; /* FC flags */
362 /* Several of these flags are HBA centric and should be moved to
363 * phba->link_flag (e.g. FC_PTP, FC_PUBLIC_LOOP)
364 */
365 #define FC_PT2PT 0x1 /* pt2pt with no fabric */
366 #define FC_PT2PT_PLOGI 0x2 /* pt2pt initiate PLOGI */
367 #define FC_DISC_TMO 0x4 /* Discovery timer running */
368 #define FC_PUBLIC_LOOP 0x8 /* Public loop */
369 #define FC_LBIT 0x10 /* LOGIN bit in loopinit set */
370 #define FC_RSCN_MODE 0x20 /* RSCN cmd rcv'ed */
371 #define FC_NLP_MORE 0x40 /* More node to process in node tbl */
372 #define FC_OFFLINE_MODE 0x80 /* Interface is offline for diag */
373 #define FC_FABRIC 0x100 /* We are fabric attached */
374 #define FC_VPORT_LOGO_RCVD 0x200 /* LOGO received on vport */
375 #define FC_RSCN_DISCOVERY 0x400 /* Auth all devices after RSCN */
376 #define FC_LOGO_RCVD_DID_CHNG 0x800 /* FDISC on phys port detect DID chng*/
377 #define FC_SCSI_SCAN_TMO 0x4000 /* scsi scan timer running */
378 #define FC_ABORT_DISCOVERY 0x8000 /* we want to abort discovery */
379 #define FC_NDISC_ACTIVE 0x10000 /* NPort discovery active */
380 #define FC_BYPASSED_MODE 0x20000 /* NPort is in bypassed mode */
381 #define FC_VPORT_NEEDS_REG_VPI 0x80000 /* Needs to have its vpi registered */
382 #define FC_RSCN_DEFERRED 0x100000 /* A deferred RSCN being processed */
383 #define FC_VPORT_NEEDS_INIT_VPI 0x200000 /* Need to INIT_VPI before FDISC */
384 #define FC_VPORT_CVL_RCVD 0x400000 /* VLink failed due to CVL */
385 #define FC_VFI_REGISTERED 0x800000 /* VFI is registered */
386 #define FC_FDISC_COMPLETED 0x1000000/* FDISC completed */
387 #define FC_DISC_DELAYED 0x2000000/* Delay NPort discovery */
388
389 uint32_t ct_flags;
390 #define FC_CT_RFF_ID 0x1 /* RFF_ID accepted by switch */
391 #define FC_CT_RNN_ID 0x2 /* RNN_ID accepted by switch */
392 #define FC_CT_RSNN_NN 0x4 /* RSNN_NN accepted by switch */
393 #define FC_CT_RSPN_ID 0x8 /* RSPN_ID accepted by switch */
394 #define FC_CT_RFT_ID 0x10 /* RFT_ID accepted by switch */
395
396 struct list_head fc_nodes;
397
398 /* Keep counters for the number of entries in each list. */
399 uint16_t fc_plogi_cnt;
400 uint16_t fc_adisc_cnt;
401 uint16_t fc_reglogin_cnt;
402 uint16_t fc_prli_cnt;
403 uint16_t fc_unmap_cnt;
404 uint16_t fc_map_cnt;
405 uint16_t fc_npr_cnt;
406 uint16_t fc_unused_cnt;
407 struct serv_parm fc_sparam; /* buffer for our service parameters */
408
409 uint32_t fc_myDID; /* fibre channel S_ID */
410 uint32_t fc_prevDID; /* previous fibre channel S_ID */
411 struct lpfc_name fabric_portname;
412 struct lpfc_name fabric_nodename;
413
414 int32_t stopped; /* HBA has not been restarted since last ERATT */
415 uint8_t fc_linkspeed; /* Link speed after last READ_LA */
416
417 uint32_t num_disc_nodes; /* in addition to hba_state */
418 uint32_t gidft_inp; /* cnt of outstanding GID_FTs */
419
420 uint32_t fc_nlp_cnt; /* outstanding NODELIST requests */
421 uint32_t fc_rscn_id_cnt; /* count of RSCNs payloads in list */
422 uint32_t fc_rscn_flush; /* flag use of fc_rscn_id_list */
423 struct lpfc_dmabuf *fc_rscn_id_list[FC_MAX_HOLD_RSCN];
424 struct lpfc_name fc_nodename; /* fc nodename */
425 struct lpfc_name fc_portname; /* fc portname */
426
427 struct lpfc_work_evt disc_timeout_evt;
428
429 struct timer_list fc_disctmo; /* Discovery rescue timer */
430 uint8_t fc_ns_retry; /* retries for fabric nameserver */
431 uint32_t fc_prli_sent; /* cntr for outstanding PRLIs */
432
433 spinlock_t work_port_lock;
434 uint32_t work_port_events; /* Timeout to be handled */
435 #define WORKER_DISC_TMO 0x1 /* vport: Discovery timeout */
436 #define WORKER_ELS_TMO 0x2 /* vport: ELS timeout */
437 #define WORKER_DELAYED_DISC_TMO 0x8 /* vport: delayed discovery */
438
439 #define WORKER_MBOX_TMO 0x100 /* hba: MBOX timeout */
440 #define WORKER_HB_TMO 0x200 /* hba: Heart beat timeout */
441 #define WORKER_FABRIC_BLOCK_TMO 0x400 /* hba: fabric block timeout */
442 #define WORKER_RAMP_DOWN_QUEUE 0x800 /* hba: Decrease Q depth */
443 #define WORKER_RAMP_UP_QUEUE 0x1000 /* hba: Increase Q depth */
444 #define WORKER_SERVICE_TXQ 0x2000 /* hba: IOCBs on the txq */
445
446 struct timer_list els_tmofunc;
447 struct timer_list delayed_disc_tmo;
448
449 int unreg_vpi_cmpl;
450
451 uint8_t load_flag;
452 #define FC_LOADING 0x1 /* HBA in process of loading drvr */
453 #define FC_UNLOADING 0x2 /* HBA in process of unloading drvr */
454 #define FC_ALLOW_FDMI 0x4 /* port is ready for FDMI requests */
455 /* Vport Config Parameters */
456 uint32_t cfg_scan_down;
457 uint32_t cfg_lun_queue_depth;
458 uint32_t cfg_nodev_tmo;
459 uint32_t cfg_devloss_tmo;
460 uint32_t cfg_restrict_login;
461 uint32_t cfg_peer_port_login;
462 uint32_t cfg_fcp_class;
463 uint32_t cfg_use_adisc;
464 uint32_t cfg_discovery_threads;
465 uint32_t cfg_log_verbose;
466 uint32_t cfg_enable_fc4_type;
467 uint32_t cfg_max_luns;
468 uint32_t cfg_enable_da_id;
469 uint32_t cfg_max_scsicmpl_time;
470 uint32_t cfg_tgt_queue_depth;
471 uint32_t cfg_first_burst_size;
472 uint32_t dev_loss_tmo_changed;
473
474 struct fc_vport *fc_vport;
475
476 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
477 struct dentry *debug_disc_trc;
478 struct dentry *debug_nodelist;
479 struct dentry *debug_nvmestat;
480 struct dentry *debug_scsistat;
481 struct dentry *debug_ioktime;
482 struct dentry *debug_hdwqstat;
483 struct dentry *vport_debugfs_root;
484 struct lpfc_debugfs_trc *disc_trc;
485 atomic_t disc_trc_cnt;
486 #endif
487 uint8_t stat_data_enabled;
488 uint8_t stat_data_blocked;
489 struct list_head rcv_buffer_list;
490 unsigned long rcv_buffer_time_stamp;
491 uint32_t vport_flag;
492 #define STATIC_VPORT 1
493 #define FAWWPN_SET 2
494 #define FAWWPN_PARAM_CHG 4
495
496 uint16_t fdmi_num_disc;
497 uint32_t fdmi_hba_mask;
498 uint32_t fdmi_port_mask;
499
500 /* There is a single nvme instance per vport. */
501 struct nvme_fc_local_port *localport;
502 uint8_t nvmei_support; /* driver supports NVME Initiator */
503 uint32_t last_fcp_wqidx;
504 uint32_t rcv_flogi_cnt; /* How many unsol FLOGIs ACK'd. */
505 };
506
507 struct hbq_s {
508 uint16_t entry_count; /* Current number of HBQ slots */
509 uint16_t buffer_count; /* Current number of buffers posted */
510 uint32_t next_hbqPutIdx; /* Index to next HBQ slot to use */
511 uint32_t hbqPutIdx; /* HBQ slot to use */
512 uint32_t local_hbqGetIdx; /* Local copy of Get index from Port */
513 void *hbq_virt; /* Virtual ptr to this hbq */
514 struct list_head hbq_buffer_list; /* buffers assigned to this HBQ */
515 /* Callback for HBQ buffer allocation */
516 struct hbq_dmabuf *(*hbq_alloc_buffer) (struct lpfc_hba *);
517 /* Callback for HBQ buffer free */
518 void (*hbq_free_buffer) (struct lpfc_hba *,
519 struct hbq_dmabuf *);
520 };
521
522 /* this matches the position in the lpfc_hbq_defs array */
523 #define LPFC_ELS_HBQ 0
524 #define LPFC_MAX_HBQS 1
525
526 enum hba_temp_state {
527 HBA_NORMAL_TEMP,
528 HBA_OVER_TEMP
529 };
530
531 enum intr_type_t {
532 NONE = 0,
533 INTx,
534 MSI,
535 MSIX,
536 };
537
538 #define LPFC_CT_CTX_MAX 64
539 struct unsol_rcv_ct_ctx {
540 uint32_t ctxt_id;
541 uint32_t SID;
542 uint32_t valid;
543 #define UNSOL_INVALID 0
544 #define UNSOL_VALID 1
545 uint16_t oxid;
546 uint16_t rxid;
547 };
548
549 #define LPFC_USER_LINK_SPEED_AUTO 0 /* auto select (default)*/
550 #define LPFC_USER_LINK_SPEED_1G 1 /* 1 Gigabaud */
551 #define LPFC_USER_LINK_SPEED_2G 2 /* 2 Gigabaud */
552 #define LPFC_USER_LINK_SPEED_4G 4 /* 4 Gigabaud */
553 #define LPFC_USER_LINK_SPEED_8G 8 /* 8 Gigabaud */
554 #define LPFC_USER_LINK_SPEED_10G 10 /* 10 Gigabaud */
555 #define LPFC_USER_LINK_SPEED_16G 16 /* 16 Gigabaud */
556 #define LPFC_USER_LINK_SPEED_32G 32 /* 32 Gigabaud */
557 #define LPFC_USER_LINK_SPEED_64G 64 /* 64 Gigabaud */
558 #define LPFC_USER_LINK_SPEED_MAX LPFC_USER_LINK_SPEED_64G
559
560 #define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8, 10, 16, 32, 64"
561
562 enum nemb_type {
563 nemb_mse = 1,
564 nemb_hbd
565 };
566
567 enum mbox_type {
568 mbox_rd = 1,
569 mbox_wr
570 };
571
572 enum dma_type {
573 dma_mbox = 1,
574 dma_ebuf
575 };
576
577 enum sta_type {
578 sta_pre_addr = 1,
579 sta_pos_addr
580 };
581
582 struct lpfc_mbox_ext_buf_ctx {
583 uint32_t state;
584 #define LPFC_BSG_MBOX_IDLE 0
585 #define LPFC_BSG_MBOX_HOST 1
586 #define LPFC_BSG_MBOX_PORT 2
587 #define LPFC_BSG_MBOX_DONE 3
588 #define LPFC_BSG_MBOX_ABTS 4
589 enum nemb_type nembType;
590 enum mbox_type mboxType;
591 uint32_t numBuf;
592 uint32_t mbxTag;
593 uint32_t seqNum;
594 struct lpfc_dmabuf *mbx_dmabuf;
595 struct list_head ext_dmabuf_list;
596 };
597
598 struct lpfc_epd_pool {
599 /* Expedite pool */
600 struct list_head list;
601 u32 count;
602 spinlock_t lock; /* lock for expedite pool */
603 };
604
605 enum ras_state {
606 INACTIVE,
607 REG_INPROGRESS,
608 ACTIVE
609 };
610
611 struct lpfc_ras_fwlog {
612 uint8_t *fwlog_buff;
613 uint32_t fw_buffcount; /* Buffer size posted to FW */
614 #define LPFC_RAS_BUFF_ENTERIES 16 /* Each entry can hold max of 64k */
615 #define LPFC_RAS_MAX_ENTRY_SIZE (64 * 1024)
616 #define LPFC_RAS_MIN_BUFF_POST_SIZE (256 * 1024)
617 #define LPFC_RAS_MAX_BUFF_POST_SIZE (1024 * 1024)
618 uint32_t fw_loglevel; /* Log level set */
619 struct lpfc_dmabuf lwpd;
620 struct list_head fwlog_buff_list;
621
622 /* RAS support status on adapter */
623 bool ras_hwsupport; /* RAS Support available on HW or not */
624 bool ras_enabled; /* Ras Enabled for the function */
625 #define LPFC_RAS_DISABLE_LOGGING 0x00
626 #define LPFC_RAS_ENABLE_LOGGING 0x01
627 enum ras_state state; /* RAS logging running state */
628 };
629
630 #define DBG_LOG_STR_SZ 256
631 #define DBG_LOG_SZ 256
632
633 struct dbg_log_ent {
634 char log[DBG_LOG_STR_SZ];
635 u64 t_ns;
636 };
637
638 enum lpfc_irq_chann_mode {
639 /* Assign IRQs to all possible cpus that have hardware queues */
640 NORMAL_MODE,
641
642 /* Assign IRQs only to cpus on the same numa node as HBA */
643 NUMA_MODE,
644
645 /* Assign IRQs only on non-hyperthreaded CPUs. This is the
646 * same as normal_mode, but assign IRQS only on physical CPUs.
647 */
648 NHT_MODE,
649 };
650
651 struct lpfc_hba {
652 /* SCSI interface function jump table entries */
653 struct lpfc_io_buf * (*lpfc_get_scsi_buf)
654 (struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
655 struct scsi_cmnd *cmnd);
656 int (*lpfc_scsi_prep_dma_buf)
657 (struct lpfc_hba *, struct lpfc_io_buf *);
658 void (*lpfc_scsi_unprep_dma_buf)
659 (struct lpfc_hba *, struct lpfc_io_buf *);
660 void (*lpfc_release_scsi_buf)
661 (struct lpfc_hba *, struct lpfc_io_buf *);
662 void (*lpfc_rampdown_queue_depth)
663 (struct lpfc_hba *);
664 void (*lpfc_scsi_prep_cmnd)
665 (struct lpfc_vport *, struct lpfc_io_buf *,
666 struct lpfc_nodelist *);
667 int (*lpfc_scsi_prep_cmnd_buf)
668 (struct lpfc_vport *vport,
669 struct lpfc_io_buf *lpfc_cmd,
670 uint8_t tmo);
671
672 /* IOCB interface function jump table entries */
673 int (*__lpfc_sli_issue_iocb)
674 (struct lpfc_hba *, uint32_t,
675 struct lpfc_iocbq *, uint32_t);
676 int (*__lpfc_sli_issue_fcp_io)
677 (struct lpfc_hba *phba, uint32_t ring_number,
678 struct lpfc_iocbq *piocb, uint32_t flag);
679 void (*__lpfc_sli_release_iocbq)(struct lpfc_hba *,
680 struct lpfc_iocbq *);
681 int (*lpfc_hba_down_post)(struct lpfc_hba *phba);
682 IOCB_t * (*lpfc_get_iocb_from_iocbq)
683 (struct lpfc_iocbq *);
684 void (*lpfc_scsi_cmd_iocb_cmpl)
685 (struct lpfc_hba *, struct lpfc_iocbq *, struct lpfc_iocbq *);
686
687 /* MBOX interface function jump table entries */
688 int (*lpfc_sli_issue_mbox)
689 (struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
690
691 /* Slow-path IOCB process function jump table entries */
692 void (*lpfc_sli_handle_slow_ring_event)
693 (struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
694 uint32_t mask);
695
696 /* INIT device interface function jump table entries */
697 int (*lpfc_sli_hbq_to_firmware)
698 (struct lpfc_hba *, uint32_t, struct hbq_dmabuf *);
699 int (*lpfc_sli_brdrestart)
700 (struct lpfc_hba *);
701 int (*lpfc_sli_brdready)
702 (struct lpfc_hba *, uint32_t);
703 void (*lpfc_handle_eratt)
704 (struct lpfc_hba *);
705 void (*lpfc_stop_port)
706 (struct lpfc_hba *);
707 int (*lpfc_hba_init_link)
708 (struct lpfc_hba *, uint32_t);
709 int (*lpfc_hba_down_link)
710 (struct lpfc_hba *, uint32_t);
711 int (*lpfc_selective_reset)
712 (struct lpfc_hba *);
713
714 int (*lpfc_bg_scsi_prep_dma_buf)
715 (struct lpfc_hba *, struct lpfc_io_buf *);
716 /* Add new entries here */
717
718 /* expedite pool */
719 struct lpfc_epd_pool epd_pool;
720
721 /* SLI4 specific HBA data structure */
722 struct lpfc_sli4_hba sli4_hba;
723
724 struct workqueue_struct *wq;
725 struct delayed_work eq_delay_work;
726
727 #define LPFC_IDLE_STAT_DELAY 1000
728 struct delayed_work idle_stat_delay_work;
729
730 struct lpfc_sli sli;
731 uint8_t pci_dev_grp; /* lpfc PCI dev group: 0x0, 0x1, 0x2,... */
732 uint32_t sli_rev; /* SLI2, SLI3, or SLI4 */
733 uint32_t sli3_options; /* Mask of enabled SLI3 options */
734 #define LPFC_SLI3_HBQ_ENABLED 0x01
735 #define LPFC_SLI3_NPIV_ENABLED 0x02
736 #define LPFC_SLI3_VPORT_TEARDOWN 0x04
737 #define LPFC_SLI3_CRP_ENABLED 0x08
738 #define LPFC_SLI3_BG_ENABLED 0x20
739 #define LPFC_SLI3_DSS_ENABLED 0x40
740 #define LPFC_SLI4_PERFH_ENABLED 0x80
741 #define LPFC_SLI4_PHWQ_ENABLED 0x100
742 uint32_t iocb_cmd_size;
743 uint32_t iocb_rsp_size;
744
745 struct lpfc_trunk_link trunk_link;
746 enum hba_state link_state;
747 uint32_t link_flag; /* link state flags */
748 #define LS_LOOPBACK_MODE 0x1 /* NPort is in Loopback mode */
749 /* This flag is set while issuing */
750 /* INIT_LINK mailbox command */
751 #define LS_NPIV_FAB_SUPPORTED 0x2 /* Fabric supports NPIV */
752 #define LS_IGNORE_ERATT 0x4 /* intr handler should ignore ERATT */
753 #define LS_MDS_LINK_DOWN 0x8 /* MDS Diagnostics Link Down */
754 #define LS_MDS_LOOPBACK 0x10 /* MDS Diagnostics Link Up (Loopback) */
755 #define LS_CT_VEN_RPA 0x20 /* Vendor RPA sent to switch */
756
757 uint32_t hba_flag; /* hba generic flags */
758 #define HBA_ERATT_HANDLED 0x1 /* This flag is set when eratt handled */
759 #define DEFER_ERATT 0x2 /* Deferred error attention in progress */
760 #define HBA_FCOE_MODE 0x4 /* HBA function in FCoE Mode */
761 #define HBA_SP_QUEUE_EVT 0x8 /* Slow-path qevt posted to worker thread*/
762 #define HBA_POST_RECEIVE_BUFFER 0x10 /* Rcv buffers need to be posted */
763 #define HBA_PERSISTENT_TOPO 0x20 /* Persistent topology support in hba */
764 #define ELS_XRI_ABORT_EVENT 0x40 /* ELS_XRI abort event was queued */
765 #define ASYNC_EVENT 0x80
766 #define LINK_DISABLED 0x100 /* Link disabled by user */
767 #define FCF_TS_INPROG 0x200 /* FCF table scan in progress */
768 #define FCF_RR_INPROG 0x400 /* FCF roundrobin flogi in progress */
769 #define HBA_FIP_SUPPORT 0x800 /* FIP support in HBA */
770 #define HBA_AER_ENABLED 0x1000 /* AER enabled with HBA */
771 #define HBA_DEVLOSS_TMO 0x2000 /* HBA in devloss timeout */
772 #define HBA_RRQ_ACTIVE 0x4000 /* process the rrq active list */
773 #define HBA_IOQ_FLUSH 0x8000 /* FCP/NVME I/O queues being flushed */
774 #define HBA_FW_DUMP_OP 0x10000 /* Skips fn reset before FW dump */
775 #define HBA_RECOVERABLE_UE 0x20000 /* Firmware supports recoverable UE */
776 #define HBA_FORCED_LINK_SPEED 0x40000 /*
777 * Firmware supports Forced Link Speed
778 * capability
779 */
780 #define HBA_FLOGI_ISSUED 0x100000 /* FLOGI was issued */
781 #define HBA_DEFER_FLOGI 0x800000 /* Defer FLOGI till read_sparm cmpl */
782
783 uint32_t fcp_ring_in_use; /* When polling test if intr-hndlr active*/
784 struct lpfc_dmabuf slim2p;
785
786 MAILBOX_t *mbox;
787 uint32_t *mbox_ext;
788 struct lpfc_mbox_ext_buf_ctx mbox_ext_buf_ctx;
789 uint32_t ha_copy;
790 struct _PCB *pcb;
791 struct _IOCB *IOCBs;
792
793 struct lpfc_dmabuf hbqslimp;
794
795 uint16_t pci_cfg_value;
796
797 uint8_t fc_linkspeed; /* Link speed after last READ_LA */
798
799 uint32_t fc_eventTag; /* event tag for link attention */
800 uint32_t link_events;
801
802 /* These fields used to be binfo */
803 uint32_t fc_pref_DID; /* preferred D_ID */
804 uint8_t fc_pref_ALPA; /* preferred AL_PA */
805 uint32_t fc_edtovResol; /* E_D_TOV timer resolution */
806 uint32_t fc_edtov; /* E_D_TOV timer value */
807 uint32_t fc_arbtov; /* ARB_TOV timer value */
808 uint32_t fc_ratov; /* R_A_TOV timer value */
809 uint32_t fc_rttov; /* R_T_TOV timer value */
810 uint32_t fc_altov; /* AL_TOV timer value */
811 uint32_t fc_crtov; /* C_R_TOV timer value */
812
813 struct serv_parm fc_fabparam; /* fabric service parameters buffer */
814 uint8_t alpa_map[128]; /* AL_PA map from READ_LA */
815
816 uint32_t lmt;
817
818 uint32_t fc_topology; /* link topology, from LINK INIT */
819 uint32_t fc_topology_changed; /* link topology, from LINK INIT */
820
821 struct lpfc_stats fc_stat;
822
823 struct lpfc_nodelist fc_fcpnodev; /* nodelist entry for no device */
824 uint32_t nport_event_cnt; /* timestamp for nlplist entry */
825
826 uint8_t wwnn[8];
827 uint8_t wwpn[8];
828 uint32_t RandomData[7];
829 uint8_t fcp_embed_io;
830 uint8_t nvme_support; /* Firmware supports NVME */
831 uint8_t nvmet_support; /* driver supports NVMET */
832 #define LPFC_NVMET_MAX_PORTS 32
833 uint8_t mds_diags_support;
834 uint8_t bbcredit_support;
835 uint8_t enab_exp_wqcq_pages;
836 u8 nsler; /* Firmware supports FC-NVMe-2 SLER */
837
838 /* HBA Config Parameters */
839 uint32_t cfg_ack0;
840 uint32_t cfg_xri_rebalancing;
841 uint32_t cfg_xpsgl;
842 uint32_t cfg_enable_npiv;
843 uint32_t cfg_enable_rrq;
844 uint32_t cfg_topology;
845 uint32_t cfg_link_speed;
846 #define LPFC_FCF_FOV 1 /* Fast fcf failover */
847 #define LPFC_FCF_PRIORITY 2 /* Priority fcf failover */
848 uint32_t cfg_fcf_failover_policy;
849 uint32_t cfg_fcp_io_sched;
850 uint32_t cfg_ns_query;
851 uint32_t cfg_fcp2_no_tgt_reset;
852 uint32_t cfg_cr_delay;
853 uint32_t cfg_cr_count;
854 uint32_t cfg_multi_ring_support;
855 uint32_t cfg_multi_ring_rctl;
856 uint32_t cfg_multi_ring_type;
857 uint32_t cfg_poll;
858 uint32_t cfg_poll_tmo;
859 uint32_t cfg_task_mgmt_tmo;
860 uint32_t cfg_use_msi;
861 uint32_t cfg_auto_imax;
862 uint32_t cfg_fcp_imax;
863 uint32_t cfg_force_rscn;
864 uint32_t cfg_cq_poll_threshold;
865 uint32_t cfg_cq_max_proc_limit;
866 uint32_t cfg_fcp_cpu_map;
867 uint32_t cfg_fcp_mq_threshold;
868 uint32_t cfg_hdw_queue;
869 uint32_t cfg_irq_chann;
870 uint32_t cfg_suppress_rsp;
871 uint32_t cfg_nvme_oas;
872 uint32_t cfg_nvme_embed_cmd;
873 uint32_t cfg_nvmet_mrq_post;
874 uint32_t cfg_nvmet_mrq;
875 uint32_t cfg_enable_nvmet;
876 uint32_t cfg_nvme_enable_fb;
877 uint32_t cfg_nvmet_fb_size;
878 uint32_t cfg_total_seg_cnt;
879 uint32_t cfg_sg_seg_cnt;
880 uint32_t cfg_nvme_seg_cnt;
881 uint32_t cfg_scsi_seg_cnt;
882 uint32_t cfg_sg_dma_buf_size;
883 uint64_t cfg_soft_wwnn;
884 uint64_t cfg_soft_wwpn;
885 uint32_t cfg_hba_queue_depth;
886 uint32_t cfg_enable_hba_reset;
887 uint32_t cfg_enable_hba_heartbeat;
888 uint32_t cfg_fof;
889 uint32_t cfg_EnableXLane;
890 uint8_t cfg_oas_tgt_wwpn[8];
891 uint8_t cfg_oas_vpt_wwpn[8];
892 uint32_t cfg_oas_lun_state;
893 #define OAS_LUN_ENABLE 1
894 #define OAS_LUN_DISABLE 0
895 uint32_t cfg_oas_lun_status;
896 #define OAS_LUN_STATUS_EXISTS 0x01
897 uint32_t cfg_oas_flags;
898 #define OAS_FIND_ANY_VPORT 0x01
899 #define OAS_FIND_ANY_TARGET 0x02
900 #define OAS_LUN_VALID 0x04
901 uint32_t cfg_oas_priority;
902 uint32_t cfg_XLanePriority;
903 uint32_t cfg_enable_bg;
904 uint32_t cfg_prot_mask;
905 uint32_t cfg_prot_guard;
906 uint32_t cfg_hostmem_hgp;
907 uint32_t cfg_log_verbose;
908 uint32_t cfg_enable_fc4_type;
909 uint32_t cfg_aer_support;
910 uint32_t cfg_sriov_nr_virtfn;
911 uint32_t cfg_request_firmware_upgrade;
912 uint32_t cfg_suppress_link_up;
913 uint32_t cfg_rrq_xri_bitmap_sz;
914 uint32_t cfg_delay_discovery;
915 uint32_t cfg_sli_mode;
916 #define LPFC_INITIALIZE_LINK 0 /* do normal init_link mbox */
917 #define LPFC_DELAY_INIT_LINK 1 /* layered driver hold off */
918 #define LPFC_DELAY_INIT_LINK_INDEFINITELY 2 /* wait, manual intervention */
919 uint32_t cfg_fdmi_on;
920 #define LPFC_FDMI_NO_SUPPORT 0 /* FDMI not supported */
921 #define LPFC_FDMI_SUPPORT 1 /* FDMI supported? */
922 uint32_t cfg_enable_SmartSAN;
923 uint32_t cfg_enable_mds_diags;
924 uint32_t cfg_ras_fwlog_level;
925 uint32_t cfg_ras_fwlog_buffsize;
926 uint32_t cfg_ras_fwlog_func;
927 uint32_t cfg_enable_bbcr; /* Enable BB Credit Recovery */
928 uint32_t cfg_enable_dpp; /* Enable Direct Packet Push */
929 #define LPFC_ENABLE_FCP 1
930 #define LPFC_ENABLE_NVME 2
931 #define LPFC_ENABLE_BOTH 3
932 uint32_t cfg_enable_pbde;
933 uint32_t cfg_enable_mi;
934 struct nvmet_fc_target_port *targetport;
935 lpfc_vpd_t vpd; /* vital product data */
936
937 struct pci_dev *pcidev;
938 struct list_head work_list;
939 uint32_t work_ha; /* Host Attention Bits for WT */
940 uint32_t work_ha_mask; /* HA Bits owned by WT */
941 uint32_t work_hs; /* HS stored in case of ERRAT */
942 uint32_t work_status[2]; /* Extra status from SLIM */
943
944 wait_queue_head_t work_waitq;
945 struct task_struct *worker_thread;
946 unsigned long data_flags;
947 uint32_t border_sge_num;
948
949 uint32_t hbq_in_use; /* HBQs in use flag */
950 uint32_t hbq_count; /* Count of configured HBQs */
951 struct hbq_s hbqs[LPFC_MAX_HBQS]; /* local copy of hbq indicies */
952
953 atomic_t fcp_qidx; /* next FCP WQ (RR Policy) */
954 atomic_t nvme_qidx; /* next NVME WQ (RR Policy) */
955
956 phys_addr_t pci_bar0_map; /* Physical address for PCI BAR0 */
957 phys_addr_t pci_bar1_map; /* Physical address for PCI BAR1 */
958 phys_addr_t pci_bar2_map; /* Physical address for PCI BAR2 */
959 void __iomem *slim_memmap_p; /* Kernel memory mapped address for
960 PCI BAR0 */
961 void __iomem *ctrl_regs_memmap_p;/* Kernel memory mapped address for
962 PCI BAR2 */
963
964 void __iomem *pci_bar0_memmap_p; /* Kernel memory mapped address for
965 PCI BAR0 with dual-ULP support */
966 void __iomem *pci_bar2_memmap_p; /* Kernel memory mapped address for
967 PCI BAR2 with dual-ULP support */
968 void __iomem *pci_bar4_memmap_p; /* Kernel memory mapped address for
969 PCI BAR4 with dual-ULP support */
970 #define PCI_64BIT_BAR0 0
971 #define PCI_64BIT_BAR2 2
972 #define PCI_64BIT_BAR4 4
973 void __iomem *MBslimaddr; /* virtual address for mbox cmds */
974 void __iomem *HAregaddr; /* virtual address for host attn reg */
975 void __iomem *CAregaddr; /* virtual address for chip attn reg */
976 void __iomem *HSregaddr; /* virtual address for host status
977 reg */
978 void __iomem *HCregaddr; /* virtual address for host ctl reg */
979
980 struct lpfc_hgp __iomem *host_gp; /* Host side get/put pointers */
981 struct lpfc_pgp *port_gp;
982 uint32_t __iomem *hbq_put; /* Address in SLIM to HBQ put ptrs */
983 uint32_t *hbq_get; /* Host mem address of HBQ get ptrs */
984
985 int brd_no; /* FC board number */
986 char SerialNumber[32]; /* adapter Serial Number */
987 char OptionROMVersion[32]; /* adapter BIOS / Fcode version */
988 char BIOSVersion[16]; /* Boot BIOS version */
989 char ModelDesc[256]; /* Model Description */
990 char ModelName[80]; /* Model Name */
991 char ProgramType[256]; /* Program Type */
992 char Port[20]; /* Port No */
993 uint8_t vpd_flag; /* VPD data flag */
994
995 #define VPD_MODEL_DESC 0x1 /* valid vpd model description */
996 #define VPD_MODEL_NAME 0x2 /* valid vpd model name */
997 #define VPD_PROGRAM_TYPE 0x4 /* valid vpd program type */
998 #define VPD_PORT 0x8 /* valid vpd port data */
999 #define VPD_MASK 0xf /* mask for any vpd data */
1000
1001 uint8_t soft_wwn_enable;
1002
1003 struct timer_list fcp_poll_timer;
1004 struct timer_list eratt_poll;
1005 uint32_t eratt_poll_interval;
1006
1007 uint64_t bg_guard_err_cnt;
1008 uint64_t bg_apptag_err_cnt;
1009 uint64_t bg_reftag_err_cnt;
1010
1011 /* fastpath list. */
1012 spinlock_t scsi_buf_list_get_lock; /* SCSI buf alloc list lock */
1013 spinlock_t scsi_buf_list_put_lock; /* SCSI buf free list lock */
1014 struct list_head lpfc_scsi_buf_list_get;
1015 struct list_head lpfc_scsi_buf_list_put;
1016 uint32_t total_scsi_bufs;
1017 struct list_head lpfc_iocb_list;
1018 uint32_t total_iocbq_bufs;
1019 struct list_head active_rrq_list;
1020 spinlock_t hbalock;
1021
1022 /* dma_mem_pools */
1023 struct dma_pool *lpfc_sg_dma_buf_pool;
1024 struct dma_pool *lpfc_mbuf_pool;
1025 struct dma_pool *lpfc_hrb_pool; /* header receive buffer pool */
1026 struct dma_pool *lpfc_drb_pool; /* data receive buffer pool */
1027 struct dma_pool *lpfc_nvmet_drb_pool; /* data receive buffer pool */
1028 struct dma_pool *lpfc_hbq_pool; /* SLI3 hbq buffer pool */
1029 struct dma_pool *lpfc_cmd_rsp_buf_pool;
1030 struct lpfc_dma_pool lpfc_mbuf_safety_pool;
1031
1032 mempool_t *mbox_mem_pool;
1033 mempool_t *nlp_mem_pool;
1034 mempool_t *rrq_pool;
1035 mempool_t *active_rrq_pool;
1036
1037 struct fc_host_statistics link_stats;
1038 enum lpfc_irq_chann_mode irq_chann_mode;
1039 enum intr_type_t intr_type;
1040 uint32_t intr_mode;
1041 #define LPFC_INTR_ERROR 0xFFFFFFFF
1042 struct list_head port_list;
1043 spinlock_t port_list_lock; /* lock for port_list mutations */
1044 struct lpfc_vport *pport; /* physical lpfc_vport pointer */
1045 uint16_t max_vpi; /* Maximum virtual nports */
1046 #define LPFC_MAX_VPI 0xFF /* Max number VPI supported 0 - 0xff */
1047 #define LPFC_MAX_VPORTS 0x100 /* Max vports per port, with pport */
1048 uint16_t max_vports; /*
1049 * For IOV HBAs max_vpi can change
1050 * after a reset. max_vports is max
1051 * number of vports present. This can
1052 * be greater than max_vpi.
1053 */
1054 uint16_t vpi_base;
1055 uint16_t vfi_base;
1056 unsigned long *vpi_bmask; /* vpi allocation table */
1057 uint16_t *vpi_ids;
1058 uint16_t vpi_count;
1059 struct list_head lpfc_vpi_blk_list;
1060
1061 /* Data structure used by fabric iocb scheduler */
1062 struct list_head fabric_iocb_list;
1063 atomic_t fabric_iocb_count;
1064 struct timer_list fabric_block_timer;
1065 unsigned long bit_flags;
1066 #define FABRIC_COMANDS_BLOCKED 0
1067 atomic_t num_rsrc_err;
1068 atomic_t num_cmd_success;
1069 unsigned long last_rsrc_error_time;
1070 unsigned long last_ramp_down_time;
1071 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
1072 struct dentry *hba_debugfs_root;
1073 atomic_t debugfs_vport_count;
1074 struct dentry *debug_multixri_pools;
1075 struct dentry *debug_hbqinfo;
1076 struct dentry *debug_dumpHostSlim;
1077 struct dentry *debug_dumpHBASlim;
1078 struct dentry *debug_InjErrLBA; /* LBA to inject errors at */
1079 struct dentry *debug_InjErrNPortID; /* NPortID to inject errors at */
1080 struct dentry *debug_InjErrWWPN; /* WWPN to inject errors at */
1081 struct dentry *debug_writeGuard; /* inject write guard_tag errors */
1082 struct dentry *debug_writeApp; /* inject write app_tag errors */
1083 struct dentry *debug_writeRef; /* inject write ref_tag errors */
1084 struct dentry *debug_readGuard; /* inject read guard_tag errors */
1085 struct dentry *debug_readApp; /* inject read app_tag errors */
1086 struct dentry *debug_readRef; /* inject read ref_tag errors */
1087
1088 struct dentry *debug_nvmeio_trc;
1089 struct lpfc_debugfs_nvmeio_trc *nvmeio_trc;
1090 struct dentry *debug_hdwqinfo;
1091 #ifdef LPFC_HDWQ_LOCK_STAT
1092 struct dentry *debug_lockstat;
1093 #endif
1094 struct dentry *debug_ras_log;
1095 atomic_t nvmeio_trc_cnt;
1096 uint32_t nvmeio_trc_size;
1097 uint32_t nvmeio_trc_output_idx;
1098
1099 /* T10 DIF error injection */
1100 uint32_t lpfc_injerr_wgrd_cnt;
1101 uint32_t lpfc_injerr_wapp_cnt;
1102 uint32_t lpfc_injerr_wref_cnt;
1103 uint32_t lpfc_injerr_rgrd_cnt;
1104 uint32_t lpfc_injerr_rapp_cnt;
1105 uint32_t lpfc_injerr_rref_cnt;
1106 uint32_t lpfc_injerr_nportid;
1107 struct lpfc_name lpfc_injerr_wwpn;
1108 sector_t lpfc_injerr_lba;
1109 #define LPFC_INJERR_LBA_OFF (sector_t)(-1)
1110
1111 struct dentry *debug_slow_ring_trc;
1112 struct lpfc_debugfs_trc *slow_ring_trc;
1113 atomic_t slow_ring_trc_cnt;
1114 /* iDiag debugfs sub-directory */
1115 struct dentry *idiag_root;
1116 struct dentry *idiag_pci_cfg;
1117 struct dentry *idiag_bar_acc;
1118 struct dentry *idiag_que_info;
1119 struct dentry *idiag_que_acc;
1120 struct dentry *idiag_drb_acc;
1121 struct dentry *idiag_ctl_acc;
1122 struct dentry *idiag_mbx_acc;
1123 struct dentry *idiag_ext_acc;
1124 uint8_t lpfc_idiag_last_eq;
1125 #endif
1126 uint16_t nvmeio_trc_on;
1127
1128 /* Used for deferred freeing of ELS data buffers */
1129 struct list_head elsbuf;
1130 int elsbuf_cnt;
1131 int elsbuf_prev_cnt;
1132
1133 uint8_t temp_sensor_support;
1134 /* Fields used for heart beat. */
1135 unsigned long last_completion_time;
1136 unsigned long skipped_hb;
1137 struct timer_list hb_tmofunc;
1138 uint8_t hb_outstanding;
1139 struct timer_list rrq_tmr;
1140 enum hba_temp_state over_temp_state;
1141 /*
1142 * Following bit will be set for all buffer tags which are not
1143 * associated with any HBQ.
1144 */
1145 #define QUE_BUFTAG_BIT (1<<31)
1146 uint32_t buffer_tag_count;
1147 int wait_4_mlo_maint_flg;
1148 wait_queue_head_t wait_4_mlo_m_q;
1149 /* data structure used for latency data collection */
1150 #define LPFC_NO_BUCKET 0
1151 #define LPFC_LINEAR_BUCKET 1
1152 #define LPFC_POWER2_BUCKET 2
1153 uint8_t bucket_type;
1154 uint32_t bucket_base;
1155 uint32_t bucket_step;
1156
1157 /* Maximum number of events that can be outstanding at any time*/
1158 #define LPFC_MAX_EVT_COUNT 512
1159 atomic_t fast_event_count;
1160 uint32_t fcoe_eventtag;
1161 uint32_t fcoe_eventtag_at_fcf_scan;
1162 uint32_t fcoe_cvl_eventtag;
1163 uint32_t fcoe_cvl_eventtag_attn;
1164 struct lpfc_fcf fcf;
1165 uint8_t fc_map[3];
1166 uint8_t valid_vlan;
1167 uint16_t vlan_id;
1168 struct list_head fcf_conn_rec_list;
1169
1170 bool defer_flogi_acc_flag;
1171 uint16_t defer_flogi_acc_rx_id;
1172 uint16_t defer_flogi_acc_ox_id;
1173
1174 spinlock_t ct_ev_lock; /* synchronize access to ct_ev_waiters */
1175 struct list_head ct_ev_waiters;
1176 struct unsol_rcv_ct_ctx ct_ctx[LPFC_CT_CTX_MAX];
1177 uint32_t ctx_idx;
1178
1179 /* RAS Support */
1180 struct lpfc_ras_fwlog ras_fwlog;
1181
1182 uint8_t menlo_flag; /* menlo generic flags */
1183 #define HBA_MENLO_SUPPORT 0x1 /* HBA supports menlo commands */
1184 uint32_t iocb_cnt;
1185 uint32_t iocb_max;
1186 atomic_t sdev_cnt;
1187 spinlock_t devicelock; /* lock for luns list */
1188 mempool_t *device_data_mem_pool;
1189 struct list_head luns;
1190 #define LPFC_TRANSGRESSION_HIGH_TEMPERATURE 0x0080
1191 #define LPFC_TRANSGRESSION_LOW_TEMPERATURE 0x0040
1192 #define LPFC_TRANSGRESSION_HIGH_VOLTAGE 0x0020
1193 #define LPFC_TRANSGRESSION_LOW_VOLTAGE 0x0010
1194 #define LPFC_TRANSGRESSION_HIGH_TXBIAS 0x0008
1195 #define LPFC_TRANSGRESSION_LOW_TXBIAS 0x0004
1196 #define LPFC_TRANSGRESSION_HIGH_TXPOWER 0x0002
1197 #define LPFC_TRANSGRESSION_LOW_TXPOWER 0x0001
1198 #define LPFC_TRANSGRESSION_HIGH_RXPOWER 0x8000
1199 #define LPFC_TRANSGRESSION_LOW_RXPOWER 0x4000
1200 uint16_t sfp_alarm;
1201 uint16_t sfp_warning;
1202
1203 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
1204 uint16_t hdwqstat_on;
1205 #define LPFC_CHECK_OFF 0
1206 #define LPFC_CHECK_NVME_IO 1
1207 #define LPFC_CHECK_NVMET_IO 2
1208 #define LPFC_CHECK_SCSI_IO 4
1209 uint16_t ktime_on;
1210 uint64_t ktime_data_samples;
1211 uint64_t ktime_status_samples;
1212 uint64_t ktime_last_cmd;
1213 uint64_t ktime_seg1_total;
1214 uint64_t ktime_seg1_min;
1215 uint64_t ktime_seg1_max;
1216 uint64_t ktime_seg2_total;
1217 uint64_t ktime_seg2_min;
1218 uint64_t ktime_seg2_max;
1219 uint64_t ktime_seg3_total;
1220 uint64_t ktime_seg3_min;
1221 uint64_t ktime_seg3_max;
1222 uint64_t ktime_seg4_total;
1223 uint64_t ktime_seg4_min;
1224 uint64_t ktime_seg4_max;
1225 uint64_t ktime_seg5_total;
1226 uint64_t ktime_seg5_min;
1227 uint64_t ktime_seg5_max;
1228 uint64_t ktime_seg6_total;
1229 uint64_t ktime_seg6_min;
1230 uint64_t ktime_seg6_max;
1231 uint64_t ktime_seg7_total;
1232 uint64_t ktime_seg7_min;
1233 uint64_t ktime_seg7_max;
1234 uint64_t ktime_seg8_total;
1235 uint64_t ktime_seg8_min;
1236 uint64_t ktime_seg8_max;
1237 uint64_t ktime_seg9_total;
1238 uint64_t ktime_seg9_min;
1239 uint64_t ktime_seg9_max;
1240 uint64_t ktime_seg10_total;
1241 uint64_t ktime_seg10_min;
1242 uint64_t ktime_seg10_max;
1243 #endif
1244
1245 struct hlist_node cpuhp; /* used for cpuhp per hba callback */
1246 struct timer_list cpuhp_poll_timer;
1247 struct list_head poll_list; /* slowpath eq polling list */
1248 #define LPFC_POLL_HB 1 /* slowpath heartbeat */
1249 #define LPFC_POLL_FASTPATH 0 /* called from fastpath */
1250 #define LPFC_POLL_SLOWPATH 1 /* called from slowpath */
1251
1252 char os_host_name[MAXHOSTNAMELEN];
1253
1254 /* SCSI host template information - for physical port */
1255 struct scsi_host_template port_template;
1256 /* SCSI host template information - for all vports */
1257 struct scsi_host_template vport_template;
1258 atomic_t dbg_log_idx;
1259 atomic_t dbg_log_cnt;
1260 atomic_t dbg_log_dmping;
1261 struct dbg_log_ent dbg_log[DBG_LOG_SZ];
1262 };
1263
1264 static inline struct Scsi_Host *
1265 lpfc_shost_from_vport(struct lpfc_vport *vport)
1266 {
1267 return container_of((void *) vport, struct Scsi_Host, hostdata[0]);
1268 }
1269
1270 static inline void
1271 lpfc_set_loopback_flag(struct lpfc_hba *phba)
1272 {
1273 if (phba->cfg_topology == FLAGS_LOCAL_LB)
1274 phba->link_flag |= LS_LOOPBACK_MODE;
1275 else
1276 phba->link_flag &= ~LS_LOOPBACK_MODE;
1277 }
1278
1279 static inline int
1280 lpfc_is_link_up(struct lpfc_hba *phba)
1281 {
1282 return phba->link_state == LPFC_LINK_UP ||
1283 phba->link_state == LPFC_CLEAR_LA ||
1284 phba->link_state == LPFC_HBA_READY;
1285 }
1286
1287 static inline void
1288 lpfc_worker_wake_up(struct lpfc_hba *phba)
1289 {
1290 /* Set the lpfc data pending flag */
1291 set_bit(LPFC_DATA_READY, &phba->data_flags);
1292
1293 /* Wake up worker thread */
1294 wake_up(&phba->work_waitq);
1295 return;
1296 }
1297
1298 static inline int
1299 lpfc_readl(void __iomem *addr, uint32_t *data)
1300 {
1301 uint32_t temp;
1302 temp = readl(addr);
1303 if (temp == 0xffffffff)
1304 return -EIO;
1305 *data = temp;
1306 return 0;
1307 }
1308
1309 static inline int
1310 lpfc_sli_read_hs(struct lpfc_hba *phba)
1311 {
1312 /*
1313 * There was a link/board error. Read the status register to retrieve
1314 * the error event and process it.
1315 */
1316 phba->sli.slistat.err_attn_event++;
1317
1318 /* Save status info and check for unplug error */
1319 if (lpfc_readl(phba->HSregaddr, &phba->work_hs) ||
1320 lpfc_readl(phba->MBslimaddr + 0xa8, &phba->work_status[0]) ||
1321 lpfc_readl(phba->MBslimaddr + 0xac, &phba->work_status[1])) {
1322 return -EIO;
1323 }
1324
1325 /* Clear chip Host Attention error bit */
1326 writel(HA_ERATT, phba->HAregaddr);
1327 readl(phba->HAregaddr); /* flush */
1328 phba->pport->stopped = 1;
1329
1330 return 0;
1331 }
1332
1333 static inline struct lpfc_sli_ring *
1334 lpfc_phba_elsring(struct lpfc_hba *phba)
1335 {
1336 /* Return NULL if sli_rev has become invalid due to bad fw */
1337 if (phba->sli_rev != LPFC_SLI_REV4 &&
1338 phba->sli_rev != LPFC_SLI_REV3 &&
1339 phba->sli_rev != LPFC_SLI_REV2)
1340 return NULL;
1341
1342 if (phba->sli_rev == LPFC_SLI_REV4) {
1343 if (phba->sli4_hba.els_wq)
1344 return phba->sli4_hba.els_wq->pring;
1345 else
1346 return NULL;
1347 }
1348 return &phba->sli.sli3_ring[LPFC_ELS_RING];
1349 }
1350
1351 /**
1352 * lpfc_next_online_cpu - Finds next online CPU on cpumask
1353 * @mask: Pointer to phba's cpumask member.
1354 * @start: starting cpu index
1355 *
1356 * Note: If no valid cpu found, then nr_cpu_ids is returned.
1357 *
1358 **/
1359 static inline unsigned int
1360 lpfc_next_online_cpu(const struct cpumask *mask, unsigned int start)
1361 {
1362 unsigned int cpu_it;
1363
1364 for_each_cpu_wrap(cpu_it, mask, start) {
1365 if (cpu_online(cpu_it))
1366 break;
1367 }
1368
1369 return cpu_it;
1370 }
1371 /**
1372 * lpfc_sli4_mod_hba_eq_delay - update EQ delay
1373 * @phba: Pointer to HBA context object.
1374 * @q: The Event Queue to update.
1375 * @delay: The delay value (in us) to be written.
1376 *
1377 **/
1378 static inline void
1379 lpfc_sli4_mod_hba_eq_delay(struct lpfc_hba *phba, struct lpfc_queue *eq,
1380 u32 delay)
1381 {
1382 struct lpfc_register reg_data;
1383
1384 reg_data.word0 = 0;
1385 bf_set(lpfc_sliport_eqdelay_id, &reg_data, eq->queue_id);
1386 bf_set(lpfc_sliport_eqdelay_delay, &reg_data, delay);
1387 writel(reg_data.word0, phba->sli4_hba.u.if_type2.EQDregaddr);
1388 eq->q_mode = delay;
1389 }
1390
1391
1392 /*
1393 * Macro that declares tables and a routine to perform enum type to
1394 * ascii string lookup.
1395 *
1396 * Defines a <key,value> table for an enum. Uses xxx_INIT defines for
1397 * the enum to populate the table. Macro defines a routine (named
1398 * by caller) that will search all elements of the table for the key
1399 * and return the name string if found or "Unrecognized" if not found.
1400 */
1401 #define DECLARE_ENUM2STR_LOOKUP(routine, enum_name, enum_init) \
1402 static struct { \
1403 enum enum_name value; \
1404 char *name; \
1405 } fc_##enum_name##_e2str_names[] = enum_init; \
1406 static const char *routine(enum enum_name table_key) \
1407 { \
1408 int i; \
1409 char *name = "Unrecognized"; \
1410 \
1411 for (i = 0; i < ARRAY_SIZE(fc_##enum_name##_e2str_names); i++) {\
1412 if (fc_##enum_name##_e2str_names[i].value == table_key) {\
1413 name = fc_##enum_name##_e2str_names[i].name; \
1414 break; \
1415 } \
1416 } \
1417 return name; \
1418 }
Linux with added FPC-III support