?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block
[linux/fpc-iii.git] / drivers / scsi / wd719x.c
blobedc8a139a60d713857333e7a16dae0a258b6d553
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Driver for Western Digital WD7193, WD7197 and WD7296 SCSI cards
4 * Copyright 2013 Ondrej Zary
5 *
6 * Original driver by
7 * Aaron Dewell <dewell@woods.net>
8 * Gaerti <Juergen.Gaertner@mbox.si.uni-hannover.de>
9 *
10 * HW documentation available in book:
11 *
12 * SPIDER Command Protocol
13 * by Chandru M. Sippy
14 * SCSI Storage Products (MCP)
15 * Western Digital Corporation
16 * 09-15-95
17 *
18 * http://web.archive.org/web/20070717175254/http://sun1.rrzn.uni-hannover.de/gaertner.juergen/wd719x/Linux/Docu/Spider/
19 */
20
21 /*
22 * Driver workflow:
23 * 1. SCSI command is transformed to SCB (Spider Control Block) by the
24 * queuecommand function.
25 * 2. The address of the SCB is stored in a list to be able to access it, if
26 * something goes wrong.
27 * 3. The address of the SCB is written to the Controller, which loads the SCB
28 * via BM-DMA and processes it.
29 * 4. After it has finished, it generates an interrupt, and sets registers.
30 *
31 * flaws:
32 * - abort/reset functions
33 *
34 * ToDo:
35 * - tagged queueing
36 */
37
38 #include <linux/interrupt.h>
39 #include <linux/module.h>
40 #include <linux/delay.h>
41 #include <linux/pci.h>
42 #include <linux/firmware.h>
43 #include <linux/eeprom_93cx6.h>
44 #include <scsi/scsi_cmnd.h>
45 #include <scsi/scsi_device.h>
46 #include <scsi/scsi_host.h>
47 #include "wd719x.h"
48
49 /* low-level register access */
50 static inline u8 wd719x_readb(struct wd719x *wd, u8 reg)
51 {
52 return ioread8(wd->base + reg);
53 }
54
55 static inline u32 wd719x_readl(struct wd719x *wd, u8 reg)
56 {
57 return ioread32(wd->base + reg);
58 }
59
60 static inline void wd719x_writeb(struct wd719x *wd, u8 reg, u8 val)
61 {
62 iowrite8(val, wd->base + reg);
63 }
64
65 static inline void wd719x_writew(struct wd719x *wd, u8 reg, u16 val)
66 {
67 iowrite16(val, wd->base + reg);
68 }
69
70 static inline void wd719x_writel(struct wd719x *wd, u8 reg, u32 val)
71 {
72 iowrite32(val, wd->base + reg);
73 }
74
75 /* wait until the command register is ready */
76 static inline int wd719x_wait_ready(struct wd719x *wd)
77 {
78 int i = 0;
79
80 do {
81 if (wd719x_readb(wd, WD719X_AMR_COMMAND) == WD719X_CMD_READY)
82 return 0;
83 udelay(1);
84 } while (i++ < WD719X_WAIT_FOR_CMD_READY);
85
86 dev_err(&wd->pdev->dev, "command register is not ready: 0x%02x\n",
87 wd719x_readb(wd, WD719X_AMR_COMMAND));
88
89 return -ETIMEDOUT;
90 }
91
92 /* poll interrupt status register until command finishes */
93 static inline int wd719x_wait_done(struct wd719x *wd, int timeout)
94 {
95 u8 status;
96
97 while (timeout > 0) {
98 status = wd719x_readb(wd, WD719X_AMR_INT_STATUS);
99 if (status)
100 break;
101 timeout--;
102 udelay(1);
103 }
104
105 if (timeout <= 0) {
106 dev_err(&wd->pdev->dev, "direct command timed out\n");
107 return -ETIMEDOUT;
108 }
109
110 if (status != WD719X_INT_NOERRORS) {
111 u8 sue = wd719x_readb(wd, WD719X_AMR_SCB_ERROR);
112 /* we get this after wd719x_dev_reset, it's not an error */
113 if (sue == WD719X_SUE_TERM)
114 return 0;
115 /* we get this after wd719x_bus_reset, it's not an error */
116 if (sue == WD719X_SUE_RESET)
117 return 0;
118 dev_err(&wd->pdev->dev, "direct command failed, status 0x%02x, SUE 0x%02x\n",
119 status, sue);
120 return -EIO;
121 }
122
123 return 0;
124 }
125
126 static int wd719x_direct_cmd(struct wd719x *wd, u8 opcode, u8 dev, u8 lun,
127 u8 tag, dma_addr_t data, int timeout)
128 {
129 int ret = 0;
130
131 /* clear interrupt status register (allow command register to clear) */
132 wd719x_writeb(wd, WD719X_AMR_INT_STATUS, WD719X_INT_NONE);
133
134 /* Wait for the Command register to become free */
135 if (wd719x_wait_ready(wd))
136 return -ETIMEDOUT;
137
138 /* disable interrupts except for RESET/ABORT (it breaks them) */
139 if (opcode != WD719X_CMD_BUSRESET && opcode != WD719X_CMD_ABORT &&
140 opcode != WD719X_CMD_ABORT_TAG && opcode != WD719X_CMD_RESET)
141 dev |= WD719X_DISABLE_INT;
142 wd719x_writeb(wd, WD719X_AMR_CMD_PARAM, dev);
143 wd719x_writeb(wd, WD719X_AMR_CMD_PARAM_2, lun);
144 wd719x_writeb(wd, WD719X_AMR_CMD_PARAM_3, tag);
145 if (data)
146 wd719x_writel(wd, WD719X_AMR_SCB_IN, data);
147
148 /* clear interrupt status register again */
149 wd719x_writeb(wd, WD719X_AMR_INT_STATUS, WD719X_INT_NONE);
150
151 /* Now, write the command */
152 wd719x_writeb(wd, WD719X_AMR_COMMAND, opcode);
153
154 if (timeout) /* wait for the command to complete */
155 ret = wd719x_wait_done(wd, timeout);
156
157 /* clear interrupt status register (clean up) */
158 if (opcode != WD719X_CMD_READ_FIRMVER)
159 wd719x_writeb(wd, WD719X_AMR_INT_STATUS, WD719X_INT_NONE);
160
161 return ret;
162 }
163
164 static void wd719x_destroy(struct wd719x *wd)
165 {
166 /* stop the RISC */
167 if (wd719x_direct_cmd(wd, WD719X_CMD_SLEEP, 0, 0, 0, 0,
168 WD719X_WAIT_FOR_RISC))
169 dev_warn(&wd->pdev->dev, "RISC sleep command failed\n");
170 /* disable RISC */
171 wd719x_writeb(wd, WD719X_PCI_MODE_SELECT, 0);
172
173 WARN_ON_ONCE(!list_empty(&wd->active_scbs));
174
175 /* free internal buffers */
176 dma_free_coherent(&wd->pdev->dev, wd->fw_size, wd->fw_virt,
177 wd->fw_phys);
178 wd->fw_virt = NULL;
179 dma_free_coherent(&wd->pdev->dev, WD719X_HASH_TABLE_SIZE, wd->hash_virt,
180 wd->hash_phys);
181 wd->hash_virt = NULL;
182 dma_free_coherent(&wd->pdev->dev, sizeof(struct wd719x_host_param),
183 wd->params, wd->params_phys);
184 wd->params = NULL;
185 free_irq(wd->pdev->irq, wd);
186 }
187
188 /* finish a SCSI command, unmap buffers */
189 static void wd719x_finish_cmd(struct wd719x_scb *scb, int result)
190 {
191 struct scsi_cmnd *cmd = scb->cmd;
192 struct wd719x *wd = shost_priv(cmd->device->host);
193
194 list_del(&scb->list);
195
196 dma_unmap_single(&wd->pdev->dev, scb->phys,
197 sizeof(struct wd719x_scb), DMA_BIDIRECTIONAL);
198 scsi_dma_unmap(cmd);
199 dma_unmap_single(&wd->pdev->dev, cmd->SCp.dma_handle,
200 SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE);
201
202 cmd->result = result << 16;
203 cmd->scsi_done(cmd);
204 }
205
206 /* Build a SCB and send it to the card */
207 static int wd719x_queuecommand(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
208 {
209 int i, count_sg;
210 unsigned long flags;
211 struct wd719x_scb *scb = scsi_cmd_priv(cmd);
212 struct wd719x *wd = shost_priv(sh);
213
214 scb->cmd = cmd;
215
216 scb->CDB_tag = 0; /* Tagged queueing not supported yet */
217 scb->devid = cmd->device->id;
218 scb->lun = cmd->device->lun;
219
220 /* copy the command */
221 memcpy(scb->CDB, cmd->cmnd, cmd->cmd_len);
222
223 /* map SCB */
224 scb->phys = dma_map_single(&wd->pdev->dev, scb, sizeof(*scb),
225 DMA_BIDIRECTIONAL);
226
227 if (dma_mapping_error(&wd->pdev->dev, scb->phys))
228 goto out_error;
229
230 /* map sense buffer */
231 scb->sense_buf_length = SCSI_SENSE_BUFFERSIZE;
232 cmd->SCp.dma_handle = dma_map_single(&wd->pdev->dev, cmd->sense_buffer,
233 SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE);
234 if (dma_mapping_error(&wd->pdev->dev, cmd->SCp.dma_handle))
235 goto out_unmap_scb;
236 scb->sense_buf = cpu_to_le32(cmd->SCp.dma_handle);
237
238 /* request autosense */
239 scb->SCB_options |= WD719X_SCB_FLAGS_AUTO_REQUEST_SENSE;
240
241 /* check direction */
242 if (cmd->sc_data_direction == DMA_TO_DEVICE)
243 scb->SCB_options |= WD719X_SCB_FLAGS_CHECK_DIRECTION
244 | WD719X_SCB_FLAGS_PCI_TO_SCSI;
245 else if (cmd->sc_data_direction == DMA_FROM_DEVICE)
246 scb->SCB_options |= WD719X_SCB_FLAGS_CHECK_DIRECTION;
247
248 /* Scather/gather */
249 count_sg = scsi_dma_map(cmd);
250 if (count_sg < 0)
251 goto out_unmap_sense;
252 BUG_ON(count_sg > WD719X_SG);
253
254 if (count_sg) {
255 struct scatterlist *sg;
256
257 scb->data_length = cpu_to_le32(count_sg *
258 sizeof(struct wd719x_sglist));
259 scb->data_p = cpu_to_le32(scb->phys +
260 offsetof(struct wd719x_scb, sg_list));
261
262 scsi_for_each_sg(cmd, sg, count_sg, i) {
263 scb->sg_list[i].ptr = cpu_to_le32(sg_dma_address(sg));
264 scb->sg_list[i].length = cpu_to_le32(sg_dma_len(sg));
265 }
266 scb->SCB_options |= WD719X_SCB_FLAGS_DO_SCATTER_GATHER;
267 } else { /* zero length */
268 scb->data_length = 0;
269 scb->data_p = 0;
270 }
271
272 spin_lock_irqsave(wd->sh->host_lock, flags);
273
274 /* check if the Command register is free */
275 if (wd719x_readb(wd, WD719X_AMR_COMMAND) != WD719X_CMD_READY) {
276 spin_unlock_irqrestore(wd->sh->host_lock, flags);
277 return SCSI_MLQUEUE_HOST_BUSY;
278 }
279
280 list_add(&scb->list, &wd->active_scbs);
281
282 /* write pointer to the AMR */
283 wd719x_writel(wd, WD719X_AMR_SCB_IN, scb->phys);
284 /* send SCB opcode */
285 wd719x_writeb(wd, WD719X_AMR_COMMAND, WD719X_CMD_PROCESS_SCB);
286
287 spin_unlock_irqrestore(wd->sh->host_lock, flags);
288 return 0;
289
290 out_unmap_sense:
291 dma_unmap_single(&wd->pdev->dev, cmd->SCp.dma_handle,
292 SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE);
293 out_unmap_scb:
294 dma_unmap_single(&wd->pdev->dev, scb->phys, sizeof(*scb),
295 DMA_BIDIRECTIONAL);
296 out_error:
297 cmd->result = DID_ERROR << 16;
298 cmd->scsi_done(cmd);
299 return 0;
300 }
301
302 static int wd719x_chip_init(struct wd719x *wd)
303 {
304 int i, ret;
305 u32 risc_init[3];
306 const struct firmware *fw_wcs, *fw_risc;
307 const char fwname_wcs[] = "wd719x-wcs.bin";
308 const char fwname_risc[] = "wd719x-risc.bin";
309
310 memset(wd->hash_virt, 0, WD719X_HASH_TABLE_SIZE);
311
312 /* WCS (sequencer) firmware */
313 ret = request_firmware(&fw_wcs, fwname_wcs, &wd->pdev->dev);
314 if (ret) {
315 dev_err(&wd->pdev->dev, "Unable to load firmware %s: %d\n",
316 fwname_wcs, ret);
317 return ret;
318 }
319 /* RISC firmware */
320 ret = request_firmware(&fw_risc, fwname_risc, &wd->pdev->dev);
321 if (ret) {
322 dev_err(&wd->pdev->dev, "Unable to load firmware %s: %d\n",
323 fwname_risc, ret);
324 release_firmware(fw_wcs);
325 return ret;
326 }
327 wd->fw_size = ALIGN(fw_wcs->size, 4) + fw_risc->size;
328
329 if (!wd->fw_virt)
330 wd->fw_virt = dma_alloc_coherent(&wd->pdev->dev, wd->fw_size,
331 &wd->fw_phys, GFP_KERNEL);
332 if (!wd->fw_virt) {
333 ret = -ENOMEM;
334 goto wd719x_init_end;
335 }
336
337 /* make a fresh copy of WCS and RISC code */
338 memcpy(wd->fw_virt, fw_wcs->data, fw_wcs->size);
339 memcpy(wd->fw_virt + ALIGN(fw_wcs->size, 4), fw_risc->data,
340 fw_risc->size);
341
342 /* Reset the Spider Chip and adapter itself */
343 wd719x_writeb(wd, WD719X_PCI_PORT_RESET, WD719X_PCI_RESET);
344 udelay(WD719X_WAIT_FOR_RISC);
345 /* Clear PIO mode bits set by BIOS */
346 wd719x_writeb(wd, WD719X_AMR_CMD_PARAM, 0);
347 /* ensure RISC is not running */
348 wd719x_writeb(wd, WD719X_PCI_MODE_SELECT, 0);
349 /* ensure command port is ready */
350 wd719x_writeb(wd, WD719X_AMR_COMMAND, 0);
351 if (wd719x_wait_ready(wd)) {
352 ret = -ETIMEDOUT;
353 goto wd719x_init_end;
354 }
355
356 /* Transfer the first 2K words of RISC code to kick start the uP */
357 risc_init[0] = wd->fw_phys; /* WCS FW */
358 risc_init[1] = wd->fw_phys + ALIGN(fw_wcs->size, 4); /* RISC FW */
359 risc_init[2] = wd->hash_phys; /* hash table */
360
361 /* clear DMA status */
362 wd719x_writeb(wd, WD719X_PCI_CHANNEL2_3STATUS, 0);
363
364 /* address to read firmware from */
365 wd719x_writel(wd, WD719X_PCI_EXTERNAL_ADDR, risc_init[1]);
366 /* base address to write firmware to (on card) */
367 wd719x_writew(wd, WD719X_PCI_INTERNAL_ADDR, WD719X_PRAM_BASE_ADDR);
368 /* size: first 2K words */
369 wd719x_writew(wd, WD719X_PCI_DMA_TRANSFER_SIZE, 2048 * 2);
370 /* start DMA */
371 wd719x_writeb(wd, WD719X_PCI_CHANNEL2_3CMD, WD719X_START_CHANNEL2_3DMA);
372
373 /* wait for DMA to complete */
374 i = WD719X_WAIT_FOR_RISC;
375 while (i-- > 0) {
376 u8 status = wd719x_readb(wd, WD719X_PCI_CHANNEL2_3STATUS);
377 if (status == WD719X_START_CHANNEL2_3DONE)
378 break;
379 if (status == WD719X_START_CHANNEL2_3ABORT) {
380 dev_warn(&wd->pdev->dev, "RISC bootstrap failed: DMA aborted\n");
381 ret = -EIO;
382 goto wd719x_init_end;
383 }
384 udelay(1);
385 }
386 if (i < 1) {
387 dev_warn(&wd->pdev->dev, "RISC bootstrap failed: DMA timeout\n");
388 ret = -ETIMEDOUT;
389 goto wd719x_init_end;
390 }
391
392 /* firmware is loaded, now initialize and wake up the RISC */
393 /* write RISC initialization long words to Spider */
394 wd719x_writel(wd, WD719X_AMR_SCB_IN, risc_init[0]);
395 wd719x_writel(wd, WD719X_AMR_SCB_IN + 4, risc_init[1]);
396 wd719x_writel(wd, WD719X_AMR_SCB_IN + 8, risc_init[2]);
397
398 /* disable interrupts during initialization of RISC */
399 wd719x_writeb(wd, WD719X_AMR_CMD_PARAM, WD719X_DISABLE_INT);
400
401 /* issue INITIALIZE RISC comand */
402 wd719x_writeb(wd, WD719X_AMR_COMMAND, WD719X_CMD_INIT_RISC);
403 /* enable advanced mode (wake up RISC) */
404 wd719x_writeb(wd, WD719X_PCI_MODE_SELECT, WD719X_ENABLE_ADVANCE_MODE);
405 udelay(WD719X_WAIT_FOR_RISC);
406
407 ret = wd719x_wait_done(wd, WD719X_WAIT_FOR_RISC);
408 /* clear interrupt status register */
409 wd719x_writeb(wd, WD719X_AMR_INT_STATUS, WD719X_INT_NONE);
410 if (ret) {
411 dev_warn(&wd->pdev->dev, "Unable to initialize RISC\n");
412 goto wd719x_init_end;
413 }
414 /* RISC is up and running */
415
416 /* Read FW version from RISC */
417 ret = wd719x_direct_cmd(wd, WD719X_CMD_READ_FIRMVER, 0, 0, 0, 0,
418 WD719X_WAIT_FOR_RISC);
419 if (ret) {
420 dev_warn(&wd->pdev->dev, "Unable to read firmware version\n");
421 goto wd719x_init_end;
422 }
423 dev_info(&wd->pdev->dev, "RISC initialized with firmware version %.2x.%.2x\n",
424 wd719x_readb(wd, WD719X_AMR_SCB_OUT + 1),
425 wd719x_readb(wd, WD719X_AMR_SCB_OUT));
426
427 /* RESET SCSI bus */
428 ret = wd719x_direct_cmd(wd, WD719X_CMD_BUSRESET, 0, 0, 0, 0,
429 WD719X_WAIT_FOR_SCSI_RESET);
430 if (ret) {
431 dev_warn(&wd->pdev->dev, "SCSI bus reset failed\n");
432 goto wd719x_init_end;
433 }
434
435 /* use HostParameter structure to set Spider's Host Parameter Block */
436 ret = wd719x_direct_cmd(wd, WD719X_CMD_SET_PARAM, 0,
437 sizeof(struct wd719x_host_param), 0,
438 wd->params_phys, WD719X_WAIT_FOR_RISC);
439 if (ret) {
440 dev_warn(&wd->pdev->dev, "Failed to set HOST PARAMETERS\n");
441 goto wd719x_init_end;
442 }
443
444 /* initiate SCAM (does nothing if disabled in BIOS) */
445 /* bug?: we should pass a mask of static IDs which we don't have */
446 ret = wd719x_direct_cmd(wd, WD719X_CMD_INIT_SCAM, 0, 0, 0, 0,
447 WD719X_WAIT_FOR_SCSI_RESET);
448 if (ret) {
449 dev_warn(&wd->pdev->dev, "SCAM initialization failed\n");
450 goto wd719x_init_end;
451 }
452
453 /* clear AMR_BIOS_SHARE_INT register */
454 wd719x_writeb(wd, WD719X_AMR_BIOS_SHARE_INT, 0);
455
456 wd719x_init_end:
457 release_firmware(fw_wcs);
458 release_firmware(fw_risc);
459
460 return ret;
461 }
462
463 static int wd719x_abort(struct scsi_cmnd *cmd)
464 {
465 int action, result;
466 unsigned long flags;
467 struct wd719x_scb *scb = scsi_cmd_priv(cmd);
468 struct wd719x *wd = shost_priv(cmd->device->host);
469
470 dev_info(&wd->pdev->dev, "abort command, tag: %x\n", cmd->tag);
471
472 action = /*cmd->tag ? WD719X_CMD_ABORT_TAG : */WD719X_CMD_ABORT;
473
474 spin_lock_irqsave(wd->sh->host_lock, flags);
475 result = wd719x_direct_cmd(wd, action, cmd->device->id,
476 cmd->device->lun, cmd->tag, scb->phys, 0);
477 wd719x_finish_cmd(scb, DID_ABORT);
478 spin_unlock_irqrestore(wd->sh->host_lock, flags);
479 if (result)
480 return FAILED;
481
482 return SUCCESS;
483 }
484
485 static int wd719x_reset(struct scsi_cmnd *cmd, u8 opcode, u8 device)
486 {
487 int result;
488 unsigned long flags;
489 struct wd719x *wd = shost_priv(cmd->device->host);
490 struct wd719x_scb *scb, *tmp;
491
492 dev_info(&wd->pdev->dev, "%s reset requested\n",
493 (opcode == WD719X_CMD_BUSRESET) ? "bus" : "device");
494
495 spin_lock_irqsave(wd->sh->host_lock, flags);
496 result = wd719x_direct_cmd(wd, opcode, device, 0, 0, 0,
497 WD719X_WAIT_FOR_SCSI_RESET);
498 /* flush all SCBs (or all for a device if dev_reset) */
499 list_for_each_entry_safe(scb, tmp, &wd->active_scbs, list) {
500 if (opcode == WD719X_CMD_BUSRESET ||
501 scb->cmd->device->id == device)
502 wd719x_finish_cmd(scb, DID_RESET);
503 }
504 spin_unlock_irqrestore(wd->sh->host_lock, flags);
505 if (result)
506 return FAILED;
507
508 return SUCCESS;
509 }
510
511 static int wd719x_dev_reset(struct scsi_cmnd *cmd)
512 {
513 return wd719x_reset(cmd, WD719X_CMD_RESET, cmd->device->id);
514 }
515
516 static int wd719x_bus_reset(struct scsi_cmnd *cmd)
517 {
518 return wd719x_reset(cmd, WD719X_CMD_BUSRESET, 0);
519 }
520
521 static int wd719x_host_reset(struct scsi_cmnd *cmd)
522 {
523 struct wd719x *wd = shost_priv(cmd->device->host);
524 struct wd719x_scb *scb, *tmp;
525 unsigned long flags;
526
527 dev_info(&wd->pdev->dev, "host reset requested\n");
528 spin_lock_irqsave(wd->sh->host_lock, flags);
529 /* stop the RISC */
530 if (wd719x_direct_cmd(wd, WD719X_CMD_SLEEP, 0, 0, 0, 0,
531 WD719X_WAIT_FOR_RISC))
532 dev_warn(&wd->pdev->dev, "RISC sleep command failed\n");
533 /* disable RISC */
534 wd719x_writeb(wd, WD719X_PCI_MODE_SELECT, 0);
535
536 /* flush all SCBs */
537 list_for_each_entry_safe(scb, tmp, &wd->active_scbs, list)
538 wd719x_finish_cmd(scb, DID_RESET);
539 spin_unlock_irqrestore(wd->sh->host_lock, flags);
540
541 /* Try to reinit the RISC */
542 return wd719x_chip_init(wd) == 0 ? SUCCESS : FAILED;
543 }
544
545 static int wd719x_biosparam(struct scsi_device *sdev, struct block_device *bdev,
546 sector_t capacity, int geom[])
547 {
548 if (capacity >= 0x200000) {
549 geom[0] = 255; /* heads */
550 geom[1] = 63; /* sectors */
551 } else {
552 geom[0] = 64; /* heads */
553 geom[1] = 32; /* sectors */
554 }
555 geom[2] = sector_div(capacity, geom[0] * geom[1]); /* cylinders */
556
557 return 0;
558 }
559
560 /* process a SCB-completion interrupt */
561 static inline void wd719x_interrupt_SCB(struct wd719x *wd,
562 union wd719x_regs regs,
563 struct wd719x_scb *scb)
564 {
565 int result;
566
567 /* now have to find result from card */
568 switch (regs.bytes.SUE) {
569 case WD719X_SUE_NOERRORS:
570 result = DID_OK;
571 break;
572 case WD719X_SUE_REJECTED:
573 dev_err(&wd->pdev->dev, "command rejected\n");
574 result = DID_ERROR;
575 break;
576 case WD719X_SUE_SCBQFULL:
577 dev_err(&wd->pdev->dev, "SCB queue is full\n");
578 result = DID_ERROR;
579 break;
580 case WD719X_SUE_TERM:
581 dev_dbg(&wd->pdev->dev, "SCB terminated by direct command\n");
582 result = DID_ABORT; /* or DID_RESET? */
583 break;
584 case WD719X_SUE_CHAN1ABORT:
585 case WD719X_SUE_CHAN23ABORT:
586 result = DID_ABORT;
587 dev_err(&wd->pdev->dev, "DMA abort\n");
588 break;
589 case WD719X_SUE_CHAN1PAR:
590 case WD719X_SUE_CHAN23PAR:
591 result = DID_PARITY;
592 dev_err(&wd->pdev->dev, "DMA parity error\n");
593 break;
594 case WD719X_SUE_TIMEOUT:
595 result = DID_TIME_OUT;
596 dev_dbg(&wd->pdev->dev, "selection timeout\n");
597 break;
598 case WD719X_SUE_RESET:
599 dev_dbg(&wd->pdev->dev, "bus reset occurred\n");
600 result = DID_RESET;
601 break;
602 case WD719X_SUE_BUSERROR:
603 dev_dbg(&wd->pdev->dev, "SCSI bus error\n");
604 result = DID_ERROR;
605 break;
606 case WD719X_SUE_WRONGWAY:
607 dev_err(&wd->pdev->dev, "wrong data transfer direction\n");
608 result = DID_ERROR;
609 break;
610 case WD719X_SUE_BADPHASE:
611 dev_err(&wd->pdev->dev, "invalid SCSI phase\n");
612 result = DID_ERROR;
613 break;
614 case WD719X_SUE_TOOLONG:
615 dev_err(&wd->pdev->dev, "record too long\n");
616 result = DID_ERROR;
617 break;
618 case WD719X_SUE_BUSFREE:
619 dev_err(&wd->pdev->dev, "unexpected bus free\n");
620 result = DID_NO_CONNECT; /* or DID_ERROR ???*/
621 break;
622 case WD719X_SUE_ARSDONE:
623 dev_dbg(&wd->pdev->dev, "auto request sense\n");
624 if (regs.bytes.SCSI == 0)
625 result = DID_OK;
626 else
627 result = DID_PARITY;
628 break;
629 case WD719X_SUE_IGNORED:
630 dev_err(&wd->pdev->dev, "target id %d ignored command\n",
631 scb->cmd->device->id);
632 result = DID_NO_CONNECT;
633 break;
634 case WD719X_SUE_WRONGTAGS:
635 dev_err(&wd->pdev->dev, "reversed tags\n");
636 result = DID_ERROR;
637 break;
638 case WD719X_SUE_BADTAGS:
639 dev_err(&wd->pdev->dev, "tag type not supported by target\n");
640 result = DID_ERROR;
641 break;
642 case WD719X_SUE_NOSCAMID:
643 dev_err(&wd->pdev->dev, "no SCAM soft ID available\n");
644 result = DID_ERROR;
645 break;
646 default:
647 dev_warn(&wd->pdev->dev, "unknown SUE error code: 0x%x\n",
648 regs.bytes.SUE);
649 result = DID_ERROR;
650 break;
651 }
652
653 wd719x_finish_cmd(scb, result);
654 }
655
656 static irqreturn_t wd719x_interrupt(int irq, void *dev_id)
657 {
658 struct wd719x *wd = dev_id;
659 union wd719x_regs regs;
660 unsigned long flags;
661 u32 SCB_out;
662
663 spin_lock_irqsave(wd->sh->host_lock, flags);
664 /* read SCB pointer back from card */
665 SCB_out = wd719x_readl(wd, WD719X_AMR_SCB_OUT);
666 /* read all status info at once */
667 regs.all = cpu_to_le32(wd719x_readl(wd, WD719X_AMR_OP_CODE));
668
669 switch (regs.bytes.INT) {
670 case WD719X_INT_NONE:
671 spin_unlock_irqrestore(wd->sh->host_lock, flags);
672 return IRQ_NONE;
673 case WD719X_INT_LINKNOSTATUS:
674 dev_err(&wd->pdev->dev, "linked command completed with no status\n");
675 break;
676 case WD719X_INT_BADINT:
677 dev_err(&wd->pdev->dev, "unsolicited interrupt\n");
678 break;
679 case WD719X_INT_NOERRORS:
680 case WD719X_INT_LINKNOERRORS:
681 case WD719X_INT_ERRORSLOGGED:
682 case WD719X_INT_SPIDERFAILED:
683 /* was the cmd completed a direct or SCB command? */
684 if (regs.bytes.OPC == WD719X_CMD_PROCESS_SCB) {
685 struct wd719x_scb *scb;
686 list_for_each_entry(scb, &wd->active_scbs, list)
687 if (SCB_out == scb->phys)
688 break;
689 if (SCB_out == scb->phys)
690 wd719x_interrupt_SCB(wd, regs, scb);
691 else
692 dev_err(&wd->pdev->dev, "card returned invalid SCB pointer\n");
693 } else
694 dev_dbg(&wd->pdev->dev, "direct command 0x%x completed\n",
695 regs.bytes.OPC);
696 break;
697 case WD719X_INT_PIOREADY:
698 dev_err(&wd->pdev->dev, "card indicates PIO data ready but we never use PIO\n");
699 /* interrupt will not be cleared until all data is read */
700 break;
701 default:
702 dev_err(&wd->pdev->dev, "unknown interrupt reason: %d\n",
703 regs.bytes.INT);
704
705 }
706 /* clear interrupt so another can happen */
707 wd719x_writeb(wd, WD719X_AMR_INT_STATUS, WD719X_INT_NONE);
708 spin_unlock_irqrestore(wd->sh->host_lock, flags);
709
710 return IRQ_HANDLED;
711 }
712
713 static void wd719x_eeprom_reg_read(struct eeprom_93cx6 *eeprom)
714 {
715 struct wd719x *wd = eeprom->data;
716 u8 reg = wd719x_readb(wd, WD719X_PCI_GPIO_DATA);
717
718 eeprom->reg_data_out = reg & WD719X_EE_DO;
719 }
720
721 static void wd719x_eeprom_reg_write(struct eeprom_93cx6 *eeprom)
722 {
723 struct wd719x *wd = eeprom->data;
724 u8 reg = 0;
725
726 if (eeprom->reg_data_in)
727 reg |= WD719X_EE_DI;
728 if (eeprom->reg_data_clock)
729 reg |= WD719X_EE_CLK;
730 if (eeprom->reg_chip_select)
731 reg |= WD719X_EE_CS;
732
733 wd719x_writeb(wd, WD719X_PCI_GPIO_DATA, reg);
734 }
735
736 /* read config from EEPROM so it can be downloaded by the RISC on (re-)init */
737 static void wd719x_read_eeprom(struct wd719x *wd)
738 {
739 struct eeprom_93cx6 eeprom;
740 u8 gpio;
741 struct wd719x_eeprom_header header;
742
743 eeprom.data = wd;
744 eeprom.register_read = wd719x_eeprom_reg_read;
745 eeprom.register_write = wd719x_eeprom_reg_write;
746 eeprom.width = PCI_EEPROM_WIDTH_93C46;
747
748 /* set all outputs to low */
749 wd719x_writeb(wd, WD719X_PCI_GPIO_DATA, 0);
750 /* configure GPIO pins */
751 gpio = wd719x_readb(wd, WD719X_PCI_GPIO_CONTROL);
752 /* GPIO outputs */
753 gpio &= (~(WD719X_EE_CLK | WD719X_EE_DI | WD719X_EE_CS));
754 /* GPIO input */
755 gpio |= WD719X_EE_DO;
756 wd719x_writeb(wd, WD719X_PCI_GPIO_CONTROL, gpio);
757
758 /* read EEPROM header */
759 eeprom_93cx6_multireadb(&eeprom, 0, (u8 *)&header, sizeof(header));
760
761 if (header.sig1 == 'W' && header.sig2 == 'D')
762 eeprom_93cx6_multireadb(&eeprom, header.cfg_offset,
763 (u8 *)wd->params,
764 sizeof(struct wd719x_host_param));
765 else { /* default EEPROM values */
766 dev_warn(&wd->pdev->dev, "EEPROM signature is invalid (0x%02x 0x%02x), using default values\n",
767 header.sig1, header.sig2);
768 wd->params->ch_1_th = 0x10; /* 16 DWs = 64 B */
769 wd->params->scsi_conf = 0x4c; /* 48ma, spue, parity check */
770 wd->params->own_scsi_id = 0x07; /* ID 7, SCAM disabled */
771 wd->params->sel_timeout = 0x4d; /* 250 ms */
772 wd->params->sleep_timer = 0x01;
773 wd->params->cdb_size = cpu_to_le16(0x5555); /* all 6 B */
774 wd->params->scsi_pad = 0x1b;
775 if (wd->type == WD719X_TYPE_7193) /* narrow card - disable */
776 wd->params->wide = cpu_to_le32(0x00000000);
777 else /* initiate & respond to WIDE messages */
778 wd->params->wide = cpu_to_le32(0xffffffff);
779 wd->params->sync = cpu_to_le32(0xffffffff);
780 wd->params->soft_mask = 0x00; /* all disabled */
781 wd->params->unsol_mask = 0x00; /* all disabled */
782 }
783 /* disable TAGGED messages */
784 wd->params->tag_en = cpu_to_le16(0x0000);
785 }
786
787 /* Read card type from GPIO bits 1 and 3 */
788 static enum wd719x_card_type wd719x_detect_type(struct wd719x *wd)
789 {
790 u8 card = wd719x_readb(wd, WD719X_PCI_GPIO_CONTROL);
791
792 card |= WD719X_GPIO_ID_BITS;
793 wd719x_writeb(wd, WD719X_PCI_GPIO_CONTROL, card);
794 card = wd719x_readb(wd, WD719X_PCI_GPIO_DATA) & WD719X_GPIO_ID_BITS;
795 switch (card) {
796 case 0x08:
797 return WD719X_TYPE_7193;
798 case 0x02:
799 return WD719X_TYPE_7197;
800 case 0x00:
801 return WD719X_TYPE_7296;
802 default:
803 dev_warn(&wd->pdev->dev, "unknown card type 0x%x\n", card);
804 return WD719X_TYPE_UNKNOWN;
805 }
806 }
807
808 static int wd719x_board_found(struct Scsi_Host *sh)
809 {
810 struct wd719x *wd = shost_priv(sh);
811 static const char * const card_types[] = {
812 "Unknown card", "WD7193", "WD7197", "WD7296"
813 };
814 int ret;
815
816 INIT_LIST_HEAD(&wd->active_scbs);
817
818 sh->base = pci_resource_start(wd->pdev, 0);
819
820 wd->type = wd719x_detect_type(wd);
821
822 wd->sh = sh;
823 sh->irq = wd->pdev->irq;
824 wd->fw_virt = NULL;
825
826 /* memory area for host (EEPROM) parameters */
827 wd->params = dma_alloc_coherent(&wd->pdev->dev,
828 sizeof(struct wd719x_host_param),
829 &wd->params_phys, GFP_KERNEL);
830 if (!wd->params) {
831 dev_warn(&wd->pdev->dev, "unable to allocate parameter buffer\n");
832 return -ENOMEM;
833 }
834
835 /* memory area for the RISC for hash table of outstanding requests */
836 wd->hash_virt = dma_alloc_coherent(&wd->pdev->dev,
837 WD719X_HASH_TABLE_SIZE,
838 &wd->hash_phys, GFP_KERNEL);
839 if (!wd->hash_virt) {
840 dev_warn(&wd->pdev->dev, "unable to allocate hash buffer\n");
841 ret = -ENOMEM;
842 goto fail_free_params;
843 }
844
845 ret = request_irq(wd->pdev->irq, wd719x_interrupt, IRQF_SHARED,
846 "wd719x", wd);
847 if (ret) {
848 dev_warn(&wd->pdev->dev, "unable to assign IRQ %d\n",
849 wd->pdev->irq);
850 goto fail_free_hash;
851 }
852
853 /* read parameters from EEPROM */
854 wd719x_read_eeprom(wd);
855
856 ret = wd719x_chip_init(wd);
857 if (ret)
858 goto fail_free_irq;
859
860 sh->this_id = wd->params->own_scsi_id & WD719X_EE_SCSI_ID_MASK;
861
862 dev_info(&wd->pdev->dev, "%s at I/O 0x%lx, IRQ %u, SCSI ID %d\n",
863 card_types[wd->type], sh->base, sh->irq, sh->this_id);
864
865 return 0;
866
867 fail_free_irq:
868 free_irq(wd->pdev->irq, wd);
869 fail_free_hash:
870 dma_free_coherent(&wd->pdev->dev, WD719X_HASH_TABLE_SIZE, wd->hash_virt,
871 wd->hash_phys);
872 fail_free_params:
873 dma_free_coherent(&wd->pdev->dev, sizeof(struct wd719x_host_param),
874 wd->params, wd->params_phys);
875
876 return ret;
877 }
878
879 static struct scsi_host_template wd719x_template = {
880 .module = THIS_MODULE,
881 .name = "Western Digital 719x",
882 .cmd_size = sizeof(struct wd719x_scb),
883 .queuecommand = wd719x_queuecommand,
884 .eh_abort_handler = wd719x_abort,
885 .eh_device_reset_handler = wd719x_dev_reset,
886 .eh_bus_reset_handler = wd719x_bus_reset,
887 .eh_host_reset_handler = wd719x_host_reset,
888 .bios_param = wd719x_biosparam,
889 .proc_name = "wd719x",
890 .can_queue = 255,
891 .this_id = 7,
892 .sg_tablesize = WD719X_SG,
893 };
894
895 static int wd719x_pci_probe(struct pci_dev *pdev, const struct pci_device_id *d)
896 {
897 int err;
898 struct Scsi_Host *sh;
899 struct wd719x *wd;
900
901 err = pci_enable_device(pdev);
902 if (err)
903 goto fail;
904
905 if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) {
906 dev_warn(&pdev->dev, "Unable to set 32-bit DMA mask\n");
907 goto disable_device;
908 }
909
910 err = pci_request_regions(pdev, "wd719x");
911 if (err)
912 goto disable_device;
913 pci_set_master(pdev);
914
915 err = -ENODEV;
916 if (pci_resource_len(pdev, 0) == 0)
917 goto release_region;
918
919 err = -ENOMEM;
920 sh = scsi_host_alloc(&wd719x_template, sizeof(struct wd719x));
921 if (!sh)
922 goto release_region;
923
924 wd = shost_priv(sh);
925 wd->base = pci_iomap(pdev, 0, 0);
926 if (!wd->base)
927 goto free_host;
928 wd->pdev = pdev;
929
930 err = wd719x_board_found(sh);
931 if (err)
932 goto unmap;
933
934 err = scsi_add_host(sh, &wd->pdev->dev);
935 if (err)
936 goto destroy;
937
938 scsi_scan_host(sh);
939
940 pci_set_drvdata(pdev, sh);
941 return 0;
942
943 destroy:
944 wd719x_destroy(wd);
945 unmap:
946 pci_iounmap(pdev, wd->base);
947 free_host:
948 scsi_host_put(sh);
949 release_region:
950 pci_release_regions(pdev);
951 disable_device:
952 pci_disable_device(pdev);
953 fail:
954 return err;
955 }
956
957
958 static void wd719x_pci_remove(struct pci_dev *pdev)
959 {
960 struct Scsi_Host *sh = pci_get_drvdata(pdev);
961 struct wd719x *wd = shost_priv(sh);
962
963 scsi_remove_host(sh);
964 wd719x_destroy(wd);
965 pci_iounmap(pdev, wd->base);
966 pci_release_regions(pdev);
967 pci_disable_device(pdev);
968
969 scsi_host_put(sh);
970 }
971
972 static const struct pci_device_id wd719x_pci_table[] = {
973 { PCI_DEVICE(PCI_VENDOR_ID_WD, 0x3296) },
974 {}
975 };
976
977 MODULE_DEVICE_TABLE(pci, wd719x_pci_table);
978
979 static struct pci_driver wd719x_pci_driver = {
980 .name = "wd719x",
981 .id_table = wd719x_pci_table,
982 .probe = wd719x_pci_probe,
983 .remove = wd719x_pci_remove,
984 };
985
986 module_pci_driver(wd719x_pci_driver);
987
988 MODULE_DESCRIPTION("Western Digital WD7193/7197/7296 SCSI driver");
989 MODULE_AUTHOR("Ondrej Zary, Aaron Dewell, Juergen Gaertner");
990 MODULE_LICENSE("GPL");
991 MODULE_FIRMWARE("wd719x-wcs.bin");
992 MODULE_FIRMWARE("wd719x-risc.bin");
Linux with added FPC-III support