drivers/soc/ti/pm33xx.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * AM33XX Power Management Routines
   4  *
   5  * Copyright (C) 2012-2018 Texas Instruments Incorporated - http://www.ti.com/
   6  *      Vaibhav Bedia, Dave Gerlach
   7  */
   8
   9 #include <linux/clk.h>
  10 #include <linux/cpu.h>
  11 #include <linux/err.h>
  12 #include <linux/genalloc.h>
  13 #include <linux/kernel.h>
  14 #include <linux/init.h>
  15 #include <linux/io.h>
  16 #include <linux/module.h>
  17 #include <linux/nvmem-consumer.h>
  18 #include <linux/of.h>
  19 #include <linux/of_address.h>
  20 #include <linux/platform_data/pm33xx.h>
  21 #include <linux/platform_device.h>
  22 #include <linux/pm_runtime.h>
  23 #include <linux/rtc.h>
  24 #include <linux/rtc/rtc-omap.h>
  25 #include <linux/sizes.h>
  26 #include <linux/sram.h>
  27 #include <linux/suspend.h>
  28 #include <linux/ti-emif-sram.h>
  29 #include <linux/wkup_m3_ipc.h>
  30
  31 #include <asm/proc-fns.h>
  32 #include <asm/suspend.h>
  33 #include <asm/system_misc.h>
  34
  35 #define AMX3_PM_SRAM_SYMBOL_OFFSET(sym) ((unsigned long)(sym) - \
  36                                          (unsigned long)pm_sram->do_wfi)
  37
  38 #define RTC_SCRATCH_RESUME_REG  0
  39 #define RTC_SCRATCH_MAGIC_REG   1
  40 #define RTC_REG_BOOT_MAGIC      0x8cd0 /* RTC */
  41 #define GIC_INT_SET_PENDING_BASE 0x200
  42 #define AM43XX_GIC_DIST_BASE    0x48241000
  43
  44 static void __iomem *rtc_base_virt;
  45 static struct clk *rtc_fck;
  46 static u32 rtc_magic_val;
  47
  48 static int (*am33xx_do_wfi_sram)(unsigned long unused);
  49 static phys_addr_t am33xx_do_wfi_sram_phys;
  50
  51 static struct gen_pool *sram_pool, *sram_pool_data;
  52 static unsigned long ocmcram_location, ocmcram_location_data;
  53
  54 static struct rtc_device *omap_rtc;
  55 static void __iomem *gic_dist_base;
  56
  57 static struct am33xx_pm_platform_data *pm_ops;
  58 static struct am33xx_pm_sram_addr *pm_sram;
  59
  60 static struct device *pm33xx_dev;
  61 static struct wkup_m3_ipc *m3_ipc;
  62
  63 #ifdef CONFIG_SUSPEND
  64 static int rtc_only_idle;
  65 static int retrigger_irq;
  66 static unsigned long suspend_wfi_flags;
  67
  68 static struct wkup_m3_wakeup_src wakeup_src = {.irq_nr = 0,
  69         .src = "Unknown",
  70 };
  71
  72 static struct wkup_m3_wakeup_src rtc_alarm_wakeup = {
  73         .irq_nr = 108, .src = "RTC Alarm",
  74 };
  75
  76 static struct wkup_m3_wakeup_src rtc_ext_wakeup = {
  77         .irq_nr = 0, .src = "Ext wakeup",
  78 };
  79 #endif
  80
  81 static u32 sram_suspend_address(unsigned long addr)
  82 {
  83         return ((unsigned long)am33xx_do_wfi_sram +
  84                 AMX3_PM_SRAM_SYMBOL_OFFSET(addr));
  85 }
  86
  87 static int am33xx_push_sram_idle(void)
  88 {
  89         struct am33xx_pm_ro_sram_data ro_sram_data;
  90         int ret;
  91         u32 table_addr, ro_data_addr;
  92         void *copy_addr;
  93
  94         ro_sram_data.amx3_pm_sram_data_virt = ocmcram_location_data;
  95         ro_sram_data.amx3_pm_sram_data_phys =
  96                 gen_pool_virt_to_phys(sram_pool_data, ocmcram_location_data);
  97         ro_sram_data.rtc_base_virt = rtc_base_virt;
  98
  99         /* Save physical address to calculate resume offset during pm init */
 100         am33xx_do_wfi_sram_phys = gen_pool_virt_to_phys(sram_pool,
 101                                                         ocmcram_location);
 102
 103         am33xx_do_wfi_sram = sram_exec_copy(sram_pool, (void *)ocmcram_location,
 104                                             pm_sram->do_wfi,
 105                                             *pm_sram->do_wfi_sz);
 106         if (!am33xx_do_wfi_sram) {
 107                 dev_err(pm33xx_dev,
 108                         "PM: %s: am33xx_do_wfi copy to sram failed\n",
 109                         __func__);
 110                 return -ENODEV;
 111         }
 112
 113         table_addr =
 114                 sram_suspend_address((unsigned long)pm_sram->emif_sram_table);
 115         ret = ti_emif_copy_pm_function_table(sram_pool, (void *)table_addr);
 116         if (ret) {
 117                 dev_dbg(pm33xx_dev,
 118                         "PM: %s: EMIF function copy failed\n", __func__);
 119                 return -EPROBE_DEFER;
 120         }
 121
 122         ro_data_addr =
 123                 sram_suspend_address((unsigned long)pm_sram->ro_sram_data);
 124         copy_addr = sram_exec_copy(sram_pool, (void *)ro_data_addr,
 125                                    &ro_sram_data,
 126                                    sizeof(ro_sram_data));
 127         if (!copy_addr) {
 128                 dev_err(pm33xx_dev,
 129                         "PM: %s: ro_sram_data copy to sram failed\n",
 130                         __func__);
 131                 return -ENODEV;
 132         }
 133
 134         return 0;
 135 }
 136
 137 static int am33xx_do_sram_idle(u32 wfi_flags)
 138 {
 139         if (!m3_ipc || !pm_ops)
 140                 return 0;
 141
 142         if (wfi_flags & WFI_FLAG_WAKE_M3)
 143                 m3_ipc->ops->prepare_low_power(m3_ipc, WKUP_M3_IDLE);
 144
 145         return pm_ops->cpu_suspend(am33xx_do_wfi_sram, wfi_flags);
 146 }
 147
 148 static int __init am43xx_map_gic(void)
 149 {
 150         gic_dist_base = ioremap(AM43XX_GIC_DIST_BASE, SZ_4K);
 151
 152         if (!gic_dist_base)
 153                 return -ENOMEM;
 154
 155         return 0;
 156 }
 157
 158 #ifdef CONFIG_SUSPEND
 159 static struct wkup_m3_wakeup_src rtc_wake_src(void)
 160 {
 161         u32 i;
 162
 163         i = __raw_readl(rtc_base_virt + 0x44) & 0x40;
 164
 165         if (i) {
 166                 retrigger_irq = rtc_alarm_wakeup.irq_nr;
 167                 return rtc_alarm_wakeup;
 168         }
 169
 170         retrigger_irq = rtc_ext_wakeup.irq_nr;
 171
 172         return rtc_ext_wakeup;
 173 }
 174
 175 static int am33xx_rtc_only_idle(unsigned long wfi_flags)
 176 {
 177         omap_rtc_power_off_program(&omap_rtc->dev);
 178         am33xx_do_wfi_sram(wfi_flags);
 179         return 0;
 180 }
 181
 182 /*
 183  * Note that the RTC module clock must be re-enabled only for rtc+ddr suspend.
 184  * And looks like the module can stay in SYSC_IDLE_SMART_WKUP mode configured
 185  * by the interconnect code just fine for both rtc+ddr suspend and retention
 186  * suspend.
 187  */
 188 static int am33xx_pm_suspend(suspend_state_t suspend_state)
 189 {
 190         int i, ret = 0;
 191
 192         if (suspend_state == PM_SUSPEND_MEM &&
 193             pm_ops->check_off_mode_enable()) {
 194                 ret = clk_prepare_enable(rtc_fck);
 195                 if (ret) {
 196                         dev_err(pm33xx_dev, "Failed to enable clock: %i\n", ret);
 197                         return ret;
 198                 }
 199
 200                 pm_ops->save_context();
 201                 suspend_wfi_flags |= WFI_FLAG_RTC_ONLY;
 202                 clk_save_context();
 203                 ret = pm_ops->soc_suspend(suspend_state, am33xx_rtc_only_idle,
 204                                           suspend_wfi_flags);
 205
 206                 suspend_wfi_flags &= ~WFI_FLAG_RTC_ONLY;
 207                 dev_info(pm33xx_dev, "Entering RTC Only mode with DDR in self-refresh\n");
 208
 209                 if (!ret) {
 210                         clk_restore_context();
 211                         pm_ops->restore_context();
 212                         m3_ipc->ops->set_rtc_only(m3_ipc);
 213                         am33xx_push_sram_idle();
 214                 }
 215         } else {
 216                 ret = pm_ops->soc_suspend(suspend_state, am33xx_do_wfi_sram,
 217                                           suspend_wfi_flags);
 218         }
 219
 220         if (ret) {
 221                 dev_err(pm33xx_dev, "PM: Kernel suspend failure\n");
 222         } else {
 223                 i = m3_ipc->ops->request_pm_status(m3_ipc);
 224
 225                 switch (i) {
 226                 case 0:
 227                         dev_info(pm33xx_dev,
 228                                  "PM: Successfully put all powerdomains to target state\n");
 229                         break;
 230                 case 1:
 231                         dev_err(pm33xx_dev,
 232                                 "PM: Could not transition all powerdomains to target state\n");
 233                         ret = -1;
 234                         break;
 235                 default:
 236                         dev_err(pm33xx_dev,
 237                                 "PM: CM3 returned unknown result = %d\n", i);
 238                         ret = -1;
 239                 }
 240
 241                 /* print the wakeup reason */
 242                 if (rtc_only_idle) {
 243                         wakeup_src = rtc_wake_src();
 244                         pr_info("PM: Wakeup source %s\n", wakeup_src.src);
 245                 } else {
 246                         pr_info("PM: Wakeup source %s\n",
 247                                 m3_ipc->ops->request_wake_src(m3_ipc));
 248                 }
 249         }
 250
 251         if (suspend_state == PM_SUSPEND_MEM && pm_ops->check_off_mode_enable())
 252                 clk_disable_unprepare(rtc_fck);
 253
 254         return ret;
 255 }
 256
 257 static int am33xx_pm_enter(suspend_state_t suspend_state)
 258 {
 259         int ret = 0;
 260
 261         switch (suspend_state) {
 262         case PM_SUSPEND_MEM:
 263         case PM_SUSPEND_STANDBY:
 264                 ret = am33xx_pm_suspend(suspend_state);
 265                 break;
 266         default:
 267                 ret = -EINVAL;
 268         }
 269
 270         return ret;
 271 }
 272
 273 static int am33xx_pm_begin(suspend_state_t state)
 274 {
 275         int ret = -EINVAL;
 276         struct nvmem_device *nvmem;
 277
 278         if (state == PM_SUSPEND_MEM && pm_ops->check_off_mode_enable()) {
 279                 nvmem = devm_nvmem_device_get(&omap_rtc->dev,
 280                                               "omap_rtc_scratch0");
 281                 if (!IS_ERR(nvmem))
 282                         nvmem_device_write(nvmem, RTC_SCRATCH_MAGIC_REG * 4, 4,
 283                                            (void *)&rtc_magic_val);
 284                 rtc_only_idle = 1;
 285         } else {
 286                 rtc_only_idle = 0;
 287         }
 288
 289         pm_ops->begin_suspend();
 290
 291         switch (state) {
 292         case PM_SUSPEND_MEM:
 293                 ret = m3_ipc->ops->prepare_low_power(m3_ipc, WKUP_M3_DEEPSLEEP);
 294                 break;
 295         case PM_SUSPEND_STANDBY:
 296                 ret = m3_ipc->ops->prepare_low_power(m3_ipc, WKUP_M3_STANDBY);
 297                 break;
 298         }
 299
 300         return ret;
 301 }
 302
 303 static void am33xx_pm_end(void)
 304 {
 305         u32 val = 0;
 306         struct nvmem_device *nvmem;
 307
 308         nvmem = devm_nvmem_device_get(&omap_rtc->dev, "omap_rtc_scratch0");
 309         if (IS_ERR(nvmem))
 310                 return;
 311
 312         m3_ipc->ops->finish_low_power(m3_ipc);
 313         if (rtc_only_idle) {
 314                 if (retrigger_irq) {
 315                         /*
 316                          * 32 bits of Interrupt Set-Pending correspond to 32
 317                          * 32 interrupts. Compute the bit offset of the
 318                          * Interrupt and set that particular bit
 319                          * Compute the register offset by dividing interrupt
 320                          * number by 32 and mutiplying by 4
 321                          */
 322                         writel_relaxed(1 << (retrigger_irq & 31),
 323                                        gic_dist_base + GIC_INT_SET_PENDING_BASE
 324                                        + retrigger_irq / 32 * 4);
 325                 }
 326
 327                 nvmem_device_write(nvmem, RTC_SCRATCH_MAGIC_REG * 4, 4,
 328                                    (void *)&val);
 329         }
 330
 331         rtc_only_idle = 0;
 332
 333         pm_ops->finish_suspend();
 334 }
 335
 336 static int am33xx_pm_valid(suspend_state_t state)
 337 {
 338         switch (state) {
 339         case PM_SUSPEND_STANDBY:
 340         case PM_SUSPEND_MEM:
 341                 return 1;
 342         default:
 343                 return 0;
 344         }
 345 }
 346
 347 static const struct platform_suspend_ops am33xx_pm_ops = {
 348         .begin          = am33xx_pm_begin,
 349         .end            = am33xx_pm_end,
 350         .enter          = am33xx_pm_enter,
 351         .valid          = am33xx_pm_valid,
 352 };
 353 #endif /* CONFIG_SUSPEND */
 354
 355 static void am33xx_pm_set_ipc_ops(void)
 356 {
 357         u32 resume_address;
 358         int temp;
 359
 360         temp = ti_emif_get_mem_type();
 361         if (temp < 0) {
 362                 dev_err(pm33xx_dev, "PM: Cannot determine memory type, no PM available\n");
 363                 return;
 364         }
 365         m3_ipc->ops->set_mem_type(m3_ipc, temp);
 366
 367         /* Physical resume address to be used by ROM code */
 368         resume_address = am33xx_do_wfi_sram_phys +
 369                          *pm_sram->resume_offset + 0x4;
 370
 371         m3_ipc->ops->set_resume_address(m3_ipc, (void *)resume_address);
 372 }
 373
 374 static void am33xx_pm_free_sram(void)
 375 {
 376         gen_pool_free(sram_pool, ocmcram_location, *pm_sram->do_wfi_sz);
 377         gen_pool_free(sram_pool_data, ocmcram_location_data,
 378                       sizeof(struct am33xx_pm_ro_sram_data));
 379 }
 380
 381 /*
 382  * Push the minimal suspend-resume code to SRAM
 383  */
 384 static int am33xx_pm_alloc_sram(void)
 385 {
 386         struct device_node *np;
 387         int ret = 0;
 388
 389         np = of_find_compatible_node(NULL, NULL, "ti,omap3-mpu");
 390         if (!np) {
 391                 np = of_find_compatible_node(NULL, NULL, "ti,omap4-mpu");
 392                 if (!np) {
 393                         dev_err(pm33xx_dev, "PM: %s: Unable to find device node for mpu\n",
 394                                 __func__);
 395                         return -ENODEV;
 396                 }
 397         }
 398
 399         sram_pool = of_gen_pool_get(np, "pm-sram", 0);
 400         if (!sram_pool) {
 401                 dev_err(pm33xx_dev, "PM: %s: Unable to get sram pool for ocmcram\n",
 402                         __func__);
 403                 ret = -ENODEV;
 404                 goto mpu_put_node;
 405         }
 406
 407         sram_pool_data = of_gen_pool_get(np, "pm-sram", 1);
 408         if (!sram_pool_data) {
 409                 dev_err(pm33xx_dev, "PM: %s: Unable to get sram data pool for ocmcram\n",
 410                         __func__);
 411                 ret = -ENODEV;
 412                 goto mpu_put_node;
 413         }
 414
 415         ocmcram_location = gen_pool_alloc(sram_pool, *pm_sram->do_wfi_sz);
 416         if (!ocmcram_location) {
 417                 dev_err(pm33xx_dev, "PM: %s: Unable to allocate memory from ocmcram\n",
 418                         __func__);
 419                 ret = -ENOMEM;
 420                 goto mpu_put_node;
 421         }
 422
 423         ocmcram_location_data = gen_pool_alloc(sram_pool_data,
 424                                                sizeof(struct emif_regs_amx3));
 425         if (!ocmcram_location_data) {
 426                 dev_err(pm33xx_dev, "PM: Unable to allocate memory from ocmcram\n");
 427                 gen_pool_free(sram_pool, ocmcram_location, *pm_sram->do_wfi_sz);
 428                 ret = -ENOMEM;
 429         }
 430
 431 mpu_put_node:
 432         of_node_put(np);
 433         return ret;
 434 }
 435
 436 static int am33xx_pm_rtc_setup(void)
 437 {
 438         struct device_node *np;
 439         unsigned long val = 0;
 440         struct nvmem_device *nvmem;
 441         int error;
 442
 443         np = of_find_node_by_name(NULL, "rtc");
 444
 445         if (of_device_is_available(np)) {
 446                 /* RTC interconnect target module clock */
 447                 rtc_fck = of_clk_get_by_name(np->parent, "fck");
 448                 if (IS_ERR(rtc_fck))
 449                         return PTR_ERR(rtc_fck);
 450
 451                 rtc_base_virt = of_iomap(np, 0);
 452                 if (!rtc_base_virt) {
 453                         pr_warn("PM: could not iomap rtc");
 454                         error = -ENODEV;
 455                         goto err_clk_put;
 456                 }
 457
 458                 omap_rtc = rtc_class_open("rtc0");
 459                 if (!omap_rtc) {
 460                         pr_warn("PM: rtc0 not available");
 461                         error = -EPROBE_DEFER;
 462                         goto err_iounmap;
 463                 }
 464
 465                 nvmem = devm_nvmem_device_get(&omap_rtc->dev,
 466                                               "omap_rtc_scratch0");
 467                 if (!IS_ERR(nvmem)) {
 468                         nvmem_device_read(nvmem, RTC_SCRATCH_MAGIC_REG * 4,
 469                                           4, (void *)&rtc_magic_val);
 470                         if ((rtc_magic_val & 0xffff) != RTC_REG_BOOT_MAGIC)
 471                                 pr_warn("PM: bootloader does not support rtc-only!\n");
 472
 473                         nvmem_device_write(nvmem, RTC_SCRATCH_MAGIC_REG * 4,
 474                                            4, (void *)&val);
 475                         val = pm_sram->resume_address;
 476                         nvmem_device_write(nvmem, RTC_SCRATCH_RESUME_REG * 4,
 477                                            4, (void *)&val);
 478                 }
 479         } else {
 480                 pr_warn("PM: no-rtc available, rtc-only mode disabled.\n");
 481         }
 482
 483         return 0;
 484
 485 err_iounmap:
 486         iounmap(rtc_base_virt);
 487 err_clk_put:
 488         clk_put(rtc_fck);
 489
 490         return error;
 491 }
 492
 493 static int am33xx_pm_probe(struct platform_device *pdev)
 494 {
 495         struct device *dev = &pdev->dev;
 496         int ret;
 497
 498         if (!of_machine_is_compatible("ti,am33xx") &&
 499             !of_machine_is_compatible("ti,am43"))
 500                 return -ENODEV;
 501
 502         pm_ops = dev->platform_data;
 503         if (!pm_ops) {
 504                 dev_err(dev, "PM: Cannot get core PM ops!\n");
 505                 return -ENODEV;
 506         }
 507
 508         ret = am43xx_map_gic();
 509         if (ret) {
 510                 pr_err("PM: Could not ioremap GIC base\n");
 511                 return ret;
 512         }
 513
 514         pm_sram = pm_ops->get_sram_addrs();
 515         if (!pm_sram) {
 516                 dev_err(dev, "PM: Cannot get PM asm function addresses!!\n");
 517                 return -ENODEV;
 518         }
 519
 520         m3_ipc = wkup_m3_ipc_get();
 521         if (!m3_ipc) {
 522                 pr_err("PM: Cannot get wkup_m3_ipc handle\n");
 523                 return -EPROBE_DEFER;
 524         }
 525
 526         pm33xx_dev = dev;
 527
 528         ret = am33xx_pm_alloc_sram();
 529         if (ret)
 530                 return ret;
 531
 532         ret = am33xx_pm_rtc_setup();
 533         if (ret)
 534                 goto err_free_sram;
 535
 536         ret = am33xx_push_sram_idle();
 537         if (ret)
 538                 goto err_free_sram;
 539
 540         am33xx_pm_set_ipc_ops();
 541
 542 #ifdef CONFIG_SUSPEND
 543         suspend_set_ops(&am33xx_pm_ops);
 544
 545         /*
 546          * For a system suspend we must flush the caches, we want
 547          * the DDR in self-refresh, we want to save the context
 548          * of the EMIF, and we want the wkup_m3 to handle low-power
 549          * transition.
 550          */
 551         suspend_wfi_flags |= WFI_FLAG_FLUSH_CACHE;
 552         suspend_wfi_flags |= WFI_FLAG_SELF_REFRESH;
 553         suspend_wfi_flags |= WFI_FLAG_SAVE_EMIF;
 554         suspend_wfi_flags |= WFI_FLAG_WAKE_M3;
 555 #endif /* CONFIG_SUSPEND */
 556
 557         pm_runtime_enable(dev);
 558         ret = pm_runtime_get_sync(dev);
 559         if (ret < 0) {
 560                 pm_runtime_put_noidle(dev);
 561                 goto err_pm_runtime_disable;
 562         }
 563
 564         ret = pm_ops->init(am33xx_do_sram_idle);
 565         if (ret) {
 566                 dev_err(dev, "Unable to call core pm init!\n");
 567                 ret = -ENODEV;
 568                 goto err_pm_runtime_put;
 569         }
 570
 571         return 0;
 572
 573 err_pm_runtime_put:
 574         pm_runtime_put_sync(dev);
 575 err_pm_runtime_disable:
 576         pm_runtime_disable(dev);
 577         wkup_m3_ipc_put(m3_ipc);
 578 err_free_sram:
 579         am33xx_pm_free_sram();
 580         pm33xx_dev = NULL;
 581         return ret;
 582 }
 583
 584 static int am33xx_pm_remove(struct platform_device *pdev)
 585 {
 586         pm_runtime_put_sync(&pdev->dev);
 587         pm_runtime_disable(&pdev->dev);
 588         if (pm_ops->deinit)
 589                 pm_ops->deinit();
 590         suspend_set_ops(NULL);
 591         wkup_m3_ipc_put(m3_ipc);
 592         am33xx_pm_free_sram();
 593         iounmap(rtc_base_virt);
 594         clk_put(rtc_fck);
 595         return 0;
 596 }
 597
 598 static struct platform_driver am33xx_pm_driver = {
 599         .driver = {
 600                 .name   = "pm33xx",
 601         },
 602         .probe = am33xx_pm_probe,
 603         .remove = am33xx_pm_remove,
 604 };
 605 module_platform_driver(am33xx_pm_driver);
 606
 607 MODULE_ALIAS("platform:pm33xx");
 608 MODULE_LICENSE("GPL v2");
 609 MODULE_DESCRIPTION("am33xx power management driver");