Merge tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block
[linux/fpc-iii.git] / drivers / video / fbdev / pxa168fb.c
blob47e6a1d0d2293ef1f5a4d7ec0a064153bfcbe9f0
1 /*
2 * linux/drivers/video/pxa168fb.c -- Marvell PXA168 LCD Controller
4 * Copyright (C) 2008 Marvell International Ltd.
5 * All rights reserved.
7 * 2009-02-16 adapted from original version for PXA168/910
8 * Jun Nie <njun@marvell.com>
10 * This file is subject to the terms and conditions of the GNU General Public
11 * License. See the file COPYING in the main directory of this archive for
12 * more details.
15 #include <linux/module.h>
16 #include <linux/kernel.h>
17 #include <linux/sched.h>
18 #include <linux/string.h>
19 #include <linux/interrupt.h>
20 #include <linux/slab.h>
21 #include <linux/fb.h>
22 #include <linux/delay.h>
23 #include <linux/init.h>
24 #include <linux/io.h>
25 #include <linux/ioport.h>
26 #include <linux/platform_device.h>
27 #include <linux/dma-mapping.h>
28 #include <linux/clk.h>
29 #include <linux/err.h>
30 #include <linux/uaccess.h>
31 #include <video/pxa168fb.h>
33 #include "pxa168fb.h"
35 #define DEFAULT_REFRESH 60 /* Hz */
37 static int determine_best_pix_fmt(struct fb_var_screeninfo *var)
40 * Pseudocolor mode?
42 if (var->bits_per_pixel == 8)
43 return PIX_FMT_PSEUDOCOLOR;
46 * Check for 565/1555.
48 if (var->bits_per_pixel == 16 && var->red.length <= 5 &&
49 var->green.length <= 6 && var->blue.length <= 5) {
50 if (var->transp.length == 0) {
51 if (var->red.offset >= var->blue.offset)
52 return PIX_FMT_RGB565;
53 else
54 return PIX_FMT_BGR565;
57 if (var->transp.length == 1 && var->green.length <= 5) {
58 if (var->red.offset >= var->blue.offset)
59 return PIX_FMT_RGB1555;
60 else
61 return PIX_FMT_BGR1555;
66 * Check for 888/A888.
68 if (var->bits_per_pixel <= 32 && var->red.length <= 8 &&
69 var->green.length <= 8 && var->blue.length <= 8) {
70 if (var->bits_per_pixel == 24 && var->transp.length == 0) {
71 if (var->red.offset >= var->blue.offset)
72 return PIX_FMT_RGB888PACK;
73 else
74 return PIX_FMT_BGR888PACK;
77 if (var->bits_per_pixel == 32 && var->transp.length == 8) {
78 if (var->red.offset >= var->blue.offset)
79 return PIX_FMT_RGBA888;
80 else
81 return PIX_FMT_BGRA888;
82 } else {
83 if (var->red.offset >= var->blue.offset)
84 return PIX_FMT_RGB888UNPACK;
85 else
86 return PIX_FMT_BGR888UNPACK;
90 return -EINVAL;
93 static void set_pix_fmt(struct fb_var_screeninfo *var, int pix_fmt)
95 switch (pix_fmt) {
96 case PIX_FMT_RGB565:
97 var->bits_per_pixel = 16;
98 var->red.offset = 11; var->red.length = 5;
99 var->green.offset = 5; var->green.length = 6;
100 var->blue.offset = 0; var->blue.length = 5;
101 var->transp.offset = 0; var->transp.length = 0;
102 break;
103 case PIX_FMT_BGR565:
104 var->bits_per_pixel = 16;
105 var->red.offset = 0; var->red.length = 5;
106 var->green.offset = 5; var->green.length = 6;
107 var->blue.offset = 11; var->blue.length = 5;
108 var->transp.offset = 0; var->transp.length = 0;
109 break;
110 case PIX_FMT_RGB1555:
111 var->bits_per_pixel = 16;
112 var->red.offset = 10; var->red.length = 5;
113 var->green.offset = 5; var->green.length = 5;
114 var->blue.offset = 0; var->blue.length = 5;
115 var->transp.offset = 15; var->transp.length = 1;
116 break;
117 case PIX_FMT_BGR1555:
118 var->bits_per_pixel = 16;
119 var->red.offset = 0; var->red.length = 5;
120 var->green.offset = 5; var->green.length = 5;
121 var->blue.offset = 10; var->blue.length = 5;
122 var->transp.offset = 15; var->transp.length = 1;
123 break;
124 case PIX_FMT_RGB888PACK:
125 var->bits_per_pixel = 24;
126 var->red.offset = 16; var->red.length = 8;
127 var->green.offset = 8; var->green.length = 8;
128 var->blue.offset = 0; var->blue.length = 8;
129 var->transp.offset = 0; var->transp.length = 0;
130 break;
131 case PIX_FMT_BGR888PACK:
132 var->bits_per_pixel = 24;
133 var->red.offset = 0; var->red.length = 8;
134 var->green.offset = 8; var->green.length = 8;
135 var->blue.offset = 16; var->blue.length = 8;
136 var->transp.offset = 0; var->transp.length = 0;
137 break;
138 case PIX_FMT_RGBA888:
139 var->bits_per_pixel = 32;
140 var->red.offset = 16; var->red.length = 8;
141 var->green.offset = 8; var->green.length = 8;
142 var->blue.offset = 0; var->blue.length = 8;
143 var->transp.offset = 24; var->transp.length = 8;
144 break;
145 case PIX_FMT_BGRA888:
146 var->bits_per_pixel = 32;
147 var->red.offset = 0; var->red.length = 8;
148 var->green.offset = 8; var->green.length = 8;
149 var->blue.offset = 16; var->blue.length = 8;
150 var->transp.offset = 24; var->transp.length = 8;
151 break;
152 case PIX_FMT_PSEUDOCOLOR:
153 var->bits_per_pixel = 8;
154 var->red.offset = 0; var->red.length = 8;
155 var->green.offset = 0; var->green.length = 8;
156 var->blue.offset = 0; var->blue.length = 8;
157 var->transp.offset = 0; var->transp.length = 0;
158 break;
162 static void set_mode(struct pxa168fb_info *fbi, struct fb_var_screeninfo *var,
163 struct fb_videomode *mode, int pix_fmt, int ystretch)
165 struct fb_info *info = fbi->info;
167 set_pix_fmt(var, pix_fmt);
169 var->xres = mode->xres;
170 var->yres = mode->yres;
171 var->xres_virtual = max(var->xres, var->xres_virtual);
172 if (ystretch)
173 var->yres_virtual = info->fix.smem_len /
174 (var->xres_virtual * (var->bits_per_pixel >> 3));
175 else
176 var->yres_virtual = max(var->yres, var->yres_virtual);
177 var->grayscale = 0;
178 var->accel_flags = FB_ACCEL_NONE;
179 var->pixclock = mode->pixclock;
180 var->left_margin = mode->left_margin;
181 var->right_margin = mode->right_margin;
182 var->upper_margin = mode->upper_margin;
183 var->lower_margin = mode->lower_margin;
184 var->hsync_len = mode->hsync_len;
185 var->vsync_len = mode->vsync_len;
186 var->sync = mode->sync;
187 var->vmode = FB_VMODE_NONINTERLACED;
188 var->rotate = FB_ROTATE_UR;
191 static int pxa168fb_check_var(struct fb_var_screeninfo *var,
192 struct fb_info *info)
194 struct pxa168fb_info *fbi = info->par;
195 int pix_fmt;
198 * Determine which pixel format we're going to use.
200 pix_fmt = determine_best_pix_fmt(var);
201 if (pix_fmt < 0)
202 return pix_fmt;
203 set_pix_fmt(var, pix_fmt);
204 fbi->pix_fmt = pix_fmt;
207 * Basic geometry sanity checks.
209 if (var->xoffset + var->xres > var->xres_virtual)
210 return -EINVAL;
211 if (var->yoffset + var->yres > var->yres_virtual)
212 return -EINVAL;
213 if (var->xres + var->right_margin +
214 var->hsync_len + var->left_margin > 2048)
215 return -EINVAL;
216 if (var->yres + var->lower_margin +
217 var->vsync_len + var->upper_margin > 2048)
218 return -EINVAL;
221 * Check size of framebuffer.
223 if (var->xres_virtual * var->yres_virtual *
224 (var->bits_per_pixel >> 3) > info->fix.smem_len)
225 return -EINVAL;
227 return 0;
231 * The hardware clock divider has an integer and a fractional
232 * stage:
234 * clk2 = clk_in / integer_divider
235 * clk_out = clk2 * (1 - (fractional_divider >> 12))
237 * Calculate integer and fractional divider for given clk_in
238 * and clk_out.
240 static void set_clock_divider(struct pxa168fb_info *fbi,
241 const struct fb_videomode *m)
243 int divider_int;
244 int needed_pixclk;
245 u64 div_result;
246 u32 x = 0;
249 * Notice: The field pixclock is used by linux fb
250 * is in pixel second. E.g. struct fb_videomode &
251 * struct fb_var_screeninfo
255 * Check input values.
257 if (!m || !m->pixclock || !m->refresh) {
258 dev_err(fbi->dev, "Input refresh or pixclock is wrong.\n");
259 return;
263 * Using PLL/AXI clock.
265 x = 0x80000000;
268 * Calc divider according to refresh rate.
270 div_result = 1000000000000ll;
271 do_div(div_result, m->pixclock);
272 needed_pixclk = (u32)div_result;
274 divider_int = clk_get_rate(fbi->clk) / needed_pixclk;
276 /* check whether divisor is too small. */
277 if (divider_int < 2) {
278 dev_warn(fbi->dev, "Warning: clock source is too slow. "
279 "Try smaller resolution\n");
280 divider_int = 2;
284 * Set setting to reg.
286 x |= divider_int;
287 writel(x, fbi->reg_base + LCD_CFG_SCLK_DIV);
290 static void set_dma_control0(struct pxa168fb_info *fbi)
292 u32 x;
295 * Set bit to enable graphics DMA.
297 x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL0);
298 x &= ~CFG_GRA_ENA_MASK;
299 x |= fbi->active ? CFG_GRA_ENA(1) : CFG_GRA_ENA(0);
302 * If we are in a pseudo-color mode, we need to enable
303 * palette lookup.
305 if (fbi->pix_fmt == PIX_FMT_PSEUDOCOLOR)
306 x |= 0x10000000;
309 * Configure hardware pixel format.
311 x &= ~(0xF << 16);
312 x |= (fbi->pix_fmt >> 1) << 16;
315 * Check red and blue pixel swap.
316 * 1. source data swap
317 * 2. panel output data swap
319 x &= ~(1 << 12);
320 x |= ((fbi->pix_fmt & 1) ^ (fbi->panel_rbswap)) << 12;
322 writel(x, fbi->reg_base + LCD_SPU_DMA_CTRL0);
325 static void set_dma_control1(struct pxa168fb_info *fbi, int sync)
327 u32 x;
330 * Configure default bits: vsync triggers DMA, gated clock
331 * enable, power save enable, configure alpha registers to
332 * display 100% graphics, and set pixel command.
334 x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL1);
335 x |= 0x2032ff81;
338 * We trigger DMA on the falling edge of vsync if vsync is
339 * active low, or on the rising edge if vsync is active high.
341 if (!(sync & FB_SYNC_VERT_HIGH_ACT))
342 x |= 0x08000000;
344 writel(x, fbi->reg_base + LCD_SPU_DMA_CTRL1);
347 static void set_graphics_start(struct fb_info *info, int xoffset, int yoffset)
349 struct pxa168fb_info *fbi = info->par;
350 struct fb_var_screeninfo *var = &info->var;
351 int pixel_offset;
352 unsigned long addr;
354 pixel_offset = (yoffset * var->xres_virtual) + xoffset;
356 addr = fbi->fb_start_dma + (pixel_offset * (var->bits_per_pixel >> 3));
357 writel(addr, fbi->reg_base + LCD_CFG_GRA_START_ADDR0);
360 static void set_dumb_panel_control(struct fb_info *info)
362 struct pxa168fb_info *fbi = info->par;
363 struct pxa168fb_mach_info *mi = dev_get_platdata(fbi->dev);
364 u32 x;
367 * Preserve enable flag.
369 x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL) & 0x00000001;
371 x |= (fbi->is_blanked ? 0x7 : mi->dumb_mode) << 28;
372 x |= mi->gpio_output_data << 20;
373 x |= mi->gpio_output_mask << 12;
374 x |= mi->panel_rgb_reverse_lanes ? 0x00000080 : 0;
375 x |= mi->invert_composite_blank ? 0x00000040 : 0;
376 x |= (info->var.sync & FB_SYNC_COMP_HIGH_ACT) ? 0x00000020 : 0;
377 x |= mi->invert_pix_val_ena ? 0x00000010 : 0;
378 x |= (info->var.sync & FB_SYNC_VERT_HIGH_ACT) ? 0 : 0x00000008;
379 x |= (info->var.sync & FB_SYNC_HOR_HIGH_ACT) ? 0 : 0x00000004;
380 x |= mi->invert_pixclock ? 0x00000002 : 0;
382 writel(x, fbi->reg_base + LCD_SPU_DUMB_CTRL);
385 static void set_dumb_screen_dimensions(struct fb_info *info)
387 struct pxa168fb_info *fbi = info->par;
388 struct fb_var_screeninfo *v = &info->var;
389 int x;
390 int y;
392 x = v->xres + v->right_margin + v->hsync_len + v->left_margin;
393 y = v->yres + v->lower_margin + v->vsync_len + v->upper_margin;
395 writel((y << 16) | x, fbi->reg_base + LCD_SPUT_V_H_TOTAL);
398 static int pxa168fb_set_par(struct fb_info *info)
400 struct pxa168fb_info *fbi = info->par;
401 struct fb_var_screeninfo *var = &info->var;
402 struct fb_videomode mode;
403 u32 x;
406 * Set additional mode info.
408 if (fbi->pix_fmt == PIX_FMT_PSEUDOCOLOR)
409 info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
410 else
411 info->fix.visual = FB_VISUAL_TRUECOLOR;
412 info->fix.line_length = var->xres_virtual * var->bits_per_pixel / 8;
413 info->fix.ypanstep = var->yres;
416 * Disable panel output while we setup the display.
418 x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL);
419 writel(x & ~1, fbi->reg_base + LCD_SPU_DUMB_CTRL);
422 * Configure global panel parameters.
424 writel((var->yres << 16) | var->xres,
425 fbi->reg_base + LCD_SPU_V_H_ACTIVE);
428 * convet var to video mode
430 fb_var_to_videomode(&mode, &info->var);
432 /* Calculate clock divisor. */
433 set_clock_divider(fbi, &mode);
435 /* Configure dma ctrl regs. */
436 set_dma_control0(fbi);
437 set_dma_control1(fbi, info->var.sync);
440 * Configure graphics DMA parameters.
442 x = readl(fbi->reg_base + LCD_CFG_GRA_PITCH);
443 x = (x & ~0xFFFF) | ((var->xres_virtual * var->bits_per_pixel) >> 3);
444 writel(x, fbi->reg_base + LCD_CFG_GRA_PITCH);
445 writel((var->yres << 16) | var->xres,
446 fbi->reg_base + LCD_SPU_GRA_HPXL_VLN);
447 writel((var->yres << 16) | var->xres,
448 fbi->reg_base + LCD_SPU_GZM_HPXL_VLN);
451 * Configure dumb panel ctrl regs & timings.
453 set_dumb_panel_control(info);
454 set_dumb_screen_dimensions(info);
456 writel((var->left_margin << 16) | var->right_margin,
457 fbi->reg_base + LCD_SPU_H_PORCH);
458 writel((var->upper_margin << 16) | var->lower_margin,
459 fbi->reg_base + LCD_SPU_V_PORCH);
462 * Re-enable panel output.
464 x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL);
465 writel(x | 1, fbi->reg_base + LCD_SPU_DUMB_CTRL);
467 return 0;
470 static unsigned int chan_to_field(unsigned int chan, struct fb_bitfield *bf)
472 return ((chan & 0xffff) >> (16 - bf->length)) << bf->offset;
475 static u32 to_rgb(u16 red, u16 green, u16 blue)
477 red >>= 8;
478 green >>= 8;
479 blue >>= 8;
481 return (red << 16) | (green << 8) | blue;
484 static int
485 pxa168fb_setcolreg(unsigned int regno, unsigned int red, unsigned int green,
486 unsigned int blue, unsigned int trans, struct fb_info *info)
488 struct pxa168fb_info *fbi = info->par;
489 u32 val;
491 if (info->var.grayscale)
492 red = green = blue = (19595 * red + 38470 * green +
493 7471 * blue) >> 16;
495 if (info->fix.visual == FB_VISUAL_TRUECOLOR && regno < 16) {
496 val = chan_to_field(red, &info->var.red);
497 val |= chan_to_field(green, &info->var.green);
498 val |= chan_to_field(blue , &info->var.blue);
499 fbi->pseudo_palette[regno] = val;
502 if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR && regno < 256) {
503 val = to_rgb(red, green, blue);
504 writel(val, fbi->reg_base + LCD_SPU_SRAM_WRDAT);
505 writel(0x8300 | regno, fbi->reg_base + LCD_SPU_SRAM_CTRL);
508 return 0;
511 static int pxa168fb_blank(int blank, struct fb_info *info)
513 struct pxa168fb_info *fbi = info->par;
515 fbi->is_blanked = (blank == FB_BLANK_UNBLANK) ? 0 : 1;
516 set_dumb_panel_control(info);
518 return 0;
521 static int pxa168fb_pan_display(struct fb_var_screeninfo *var,
522 struct fb_info *info)
524 set_graphics_start(info, var->xoffset, var->yoffset);
526 return 0;
529 static irqreturn_t pxa168fb_handle_irq(int irq, void *dev_id)
531 struct pxa168fb_info *fbi = dev_id;
532 u32 isr = readl(fbi->reg_base + SPU_IRQ_ISR);
534 if ((isr & GRA_FRAME_IRQ0_ENA_MASK)) {
536 writel(isr & (~GRA_FRAME_IRQ0_ENA_MASK),
537 fbi->reg_base + SPU_IRQ_ISR);
539 return IRQ_HANDLED;
541 return IRQ_NONE;
544 static const struct fb_ops pxa168fb_ops = {
545 .owner = THIS_MODULE,
546 .fb_check_var = pxa168fb_check_var,
547 .fb_set_par = pxa168fb_set_par,
548 .fb_setcolreg = pxa168fb_setcolreg,
549 .fb_blank = pxa168fb_blank,
550 .fb_pan_display = pxa168fb_pan_display,
551 .fb_fillrect = cfb_fillrect,
552 .fb_copyarea = cfb_copyarea,
553 .fb_imageblit = cfb_imageblit,
556 static void pxa168fb_init_mode(struct fb_info *info,
557 struct pxa168fb_mach_info *mi)
559 struct pxa168fb_info *fbi = info->par;
560 struct fb_var_screeninfo *var = &info->var;
561 u32 total_w, total_h, refresh;
562 u64 div_result;
563 const struct fb_videomode *m;
566 * Set default value
568 refresh = DEFAULT_REFRESH;
570 /* try to find best video mode. */
571 m = fb_find_best_mode(&info->var, &info->modelist);
572 if (m)
573 fb_videomode_to_var(&info->var, m);
575 /* Init settings. */
576 var->xres_virtual = var->xres;
577 var->yres_virtual = info->fix.smem_len /
578 (var->xres_virtual * (var->bits_per_pixel >> 3));
579 dev_dbg(fbi->dev, "pxa168fb: find best mode: res = %dx%d\n",
580 var->xres, var->yres);
582 /* correct pixclock. */
583 total_w = var->xres + var->left_margin + var->right_margin +
584 var->hsync_len;
585 total_h = var->yres + var->upper_margin + var->lower_margin +
586 var->vsync_len;
588 div_result = 1000000000000ll;
589 do_div(div_result, total_w * total_h * refresh);
590 var->pixclock = (u32)div_result;
593 static int pxa168fb_probe(struct platform_device *pdev)
595 struct pxa168fb_mach_info *mi;
596 struct fb_info *info = 0;
597 struct pxa168fb_info *fbi = 0;
598 struct resource *res;
599 struct clk *clk;
600 int irq, ret;
602 mi = dev_get_platdata(&pdev->dev);
603 if (mi == NULL) {
604 dev_err(&pdev->dev, "no platform data defined\n");
605 return -EINVAL;
608 clk = devm_clk_get(&pdev->dev, "LCDCLK");
609 if (IS_ERR(clk)) {
610 dev_err(&pdev->dev, "unable to get LCDCLK");
611 return PTR_ERR(clk);
614 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
615 if (res == NULL) {
616 dev_err(&pdev->dev, "no IO memory defined\n");
617 return -ENOENT;
620 irq = platform_get_irq(pdev, 0);
621 if (irq < 0) {
622 dev_err(&pdev->dev, "no IRQ defined\n");
623 return -ENOENT;
626 info = framebuffer_alloc(sizeof(struct pxa168fb_info), &pdev->dev);
627 if (info == NULL) {
628 return -ENOMEM;
631 /* Initialize private data */
632 fbi = info->par;
633 fbi->info = info;
634 fbi->clk = clk;
635 fbi->dev = info->dev = &pdev->dev;
636 fbi->panel_rbswap = mi->panel_rbswap;
637 fbi->is_blanked = 0;
638 fbi->active = mi->active;
641 * Initialise static fb parameters.
643 info->flags = FBINFO_DEFAULT | FBINFO_PARTIAL_PAN_OK |
644 FBINFO_HWACCEL_XPAN | FBINFO_HWACCEL_YPAN;
645 info->node = -1;
646 strlcpy(info->fix.id, mi->id, 16);
647 info->fix.type = FB_TYPE_PACKED_PIXELS;
648 info->fix.type_aux = 0;
649 info->fix.xpanstep = 0;
650 info->fix.ypanstep = 0;
651 info->fix.ywrapstep = 0;
652 info->fix.mmio_start = res->start;
653 info->fix.mmio_len = resource_size(res);
654 info->fix.accel = FB_ACCEL_NONE;
655 info->fbops = &pxa168fb_ops;
656 info->pseudo_palette = fbi->pseudo_palette;
659 * Map LCD controller registers.
661 fbi->reg_base = devm_ioremap(&pdev->dev, res->start,
662 resource_size(res));
663 if (fbi->reg_base == NULL) {
664 ret = -ENOMEM;
665 goto failed_free_info;
669 * Allocate framebuffer memory.
671 info->fix.smem_len = PAGE_ALIGN(DEFAULT_FB_SIZE);
673 info->screen_base = dma_alloc_wc(fbi->dev, info->fix.smem_len,
674 &fbi->fb_start_dma, GFP_KERNEL);
675 if (info->screen_base == NULL) {
676 ret = -ENOMEM;
677 goto failed_free_info;
680 info->fix.smem_start = (unsigned long)fbi->fb_start_dma;
681 set_graphics_start(info, 0, 0);
684 * Set video mode according to platform data.
686 set_mode(fbi, &info->var, mi->modes, mi->pix_fmt, 1);
688 fb_videomode_to_modelist(mi->modes, mi->num_modes, &info->modelist);
691 * init video mode data.
693 pxa168fb_init_mode(info, mi);
696 * Fill in sane defaults.
698 ret = pxa168fb_check_var(&info->var, info);
699 if (ret)
700 goto failed_free_fbmem;
703 * enable controller clock
705 clk_prepare_enable(fbi->clk);
707 pxa168fb_set_par(info);
710 * Configure default register values.
712 writel(0, fbi->reg_base + LCD_SPU_BLANKCOLOR);
713 writel(mi->io_pin_allocation_mode, fbi->reg_base + SPU_IOPAD_CONTROL);
714 writel(0, fbi->reg_base + LCD_CFG_GRA_START_ADDR1);
715 writel(0, fbi->reg_base + LCD_SPU_GRA_OVSA_HPXL_VLN);
716 writel(0, fbi->reg_base + LCD_SPU_SRAM_PARA0);
717 writel(CFG_CSB_256x32(0x1)|CFG_CSB_256x24(0x1)|CFG_CSB_256x8(0x1),
718 fbi->reg_base + LCD_SPU_SRAM_PARA1);
721 * Allocate color map.
723 if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) {
724 ret = -ENOMEM;
725 goto failed_free_clk;
729 * Register irq handler.
731 ret = devm_request_irq(&pdev->dev, irq, pxa168fb_handle_irq,
732 IRQF_SHARED, info->fix.id, fbi);
733 if (ret < 0) {
734 dev_err(&pdev->dev, "unable to request IRQ\n");
735 ret = -ENXIO;
736 goto failed_free_cmap;
740 * Enable GFX interrupt
742 writel(GRA_FRAME_IRQ0_ENA(0x1), fbi->reg_base + SPU_IRQ_ENA);
745 * Register framebuffer.
747 ret = register_framebuffer(info);
748 if (ret < 0) {
749 dev_err(&pdev->dev, "Failed to register pxa168-fb: %d\n", ret);
750 ret = -ENXIO;
751 goto failed_free_cmap;
754 platform_set_drvdata(pdev, fbi);
755 return 0;
757 failed_free_cmap:
758 fb_dealloc_cmap(&info->cmap);
759 failed_free_clk:
760 clk_disable_unprepare(fbi->clk);
761 failed_free_fbmem:
762 dma_free_wc(fbi->dev, info->fix.smem_len,
763 info->screen_base, fbi->fb_start_dma);
764 failed_free_info:
765 framebuffer_release(info);
767 dev_err(&pdev->dev, "frame buffer device init failed with %d\n", ret);
768 return ret;
771 static int pxa168fb_remove(struct platform_device *pdev)
773 struct pxa168fb_info *fbi = platform_get_drvdata(pdev);
774 struct fb_info *info;
775 unsigned int data;
777 if (!fbi)
778 return 0;
780 /* disable DMA transfer */
781 data = readl(fbi->reg_base + LCD_SPU_DMA_CTRL0);
782 data &= ~CFG_GRA_ENA_MASK;
783 writel(data, fbi->reg_base + LCD_SPU_DMA_CTRL0);
785 info = fbi->info;
787 unregister_framebuffer(info);
789 writel(GRA_FRAME_IRQ0_ENA(0x0), fbi->reg_base + SPU_IRQ_ENA);
791 if (info->cmap.len)
792 fb_dealloc_cmap(&info->cmap);
794 dma_free_wc(fbi->dev, info->fix.smem_len,
795 info->screen_base, info->fix.smem_start);
797 clk_disable_unprepare(fbi->clk);
799 framebuffer_release(info);
801 return 0;
804 static struct platform_driver pxa168fb_driver = {
805 .driver = {
806 .name = "pxa168-fb",
808 .probe = pxa168fb_probe,
809 .remove = pxa168fb_remove,
812 module_platform_driver(pxa168fb_driver);
814 MODULE_AUTHOR("Lennert Buytenhek <buytenh@marvell.com> "
815 "Green Wan <gwan@marvell.com>");
816 MODULE_DESCRIPTION("Framebuffer driver for PXA168/910");
817 MODULE_LICENSE("GPL");