dm writecache: add cond_resched to loop in persistent_memory_claim()
[linux/fpc-iii.git] / drivers / iio / adc / sun4i-gpadc-iio.c
blob176e1cb4abb1f3251f7d295a08e27c7260ee8f30
1 // SPDX-License-Identifier: GPL-2.0
2 /* ADC driver for sunxi platforms' (A10, A13 and A31) GPADC
4 * Copyright (c) 2016 Quentin Schulz <quentin.schulz@free-electrons.com>
6 * The Allwinner SoCs all have an ADC that can also act as a touchscreen
7 * controller and a thermal sensor.
8 * The thermal sensor works only when the ADC acts as a touchscreen controller
9 * and is configured to throw an interrupt every fixed periods of time (let say
10 * every X seconds).
11 * One would be tempted to disable the IP on the hardware side rather than
12 * disabling interrupts to save some power but that resets the internal clock of
13 * the IP, resulting in having to wait X seconds every time we want to read the
14 * value of the thermal sensor.
15 * This is also the reason of using autosuspend in pm_runtime. If there was no
16 * autosuspend, the thermal sensor would need X seconds after every
17 * pm_runtime_get_sync to get a value from the ADC. The autosuspend allows the
18 * thermal sensor to be requested again in a certain time span before it gets
19 * shutdown for not being used.
22 #include <linux/completion.h>
23 #include <linux/interrupt.h>
24 #include <linux/io.h>
25 #include <linux/module.h>
26 #include <linux/of.h>
27 #include <linux/of_device.h>
28 #include <linux/platform_device.h>
29 #include <linux/pm_runtime.h>
30 #include <linux/regmap.h>
31 #include <linux/thermal.h>
32 #include <linux/delay.h>
34 #include <linux/iio/iio.h>
35 #include <linux/iio/driver.h>
36 #include <linux/iio/machine.h>
37 #include <linux/mfd/sun4i-gpadc.h>
39 static unsigned int sun4i_gpadc_chan_select(unsigned int chan)
41 return SUN4I_GPADC_CTRL1_ADC_CHAN_SELECT(chan);
44 static unsigned int sun6i_gpadc_chan_select(unsigned int chan)
46 return SUN6I_GPADC_CTRL1_ADC_CHAN_SELECT(chan);
49 struct gpadc_data {
50 int temp_offset;
51 int temp_scale;
52 unsigned int tp_mode_en;
53 unsigned int tp_adc_select;
54 unsigned int (*adc_chan_select)(unsigned int chan);
55 unsigned int adc_chan_mask;
58 static const struct gpadc_data sun4i_gpadc_data = {
59 .temp_offset = -1932,
60 .temp_scale = 133,
61 .tp_mode_en = SUN4I_GPADC_CTRL1_TP_MODE_EN,
62 .tp_adc_select = SUN4I_GPADC_CTRL1_TP_ADC_SELECT,
63 .adc_chan_select = &sun4i_gpadc_chan_select,
64 .adc_chan_mask = SUN4I_GPADC_CTRL1_ADC_CHAN_MASK,
67 static const struct gpadc_data sun5i_gpadc_data = {
68 .temp_offset = -1447,
69 .temp_scale = 100,
70 .tp_mode_en = SUN4I_GPADC_CTRL1_TP_MODE_EN,
71 .tp_adc_select = SUN4I_GPADC_CTRL1_TP_ADC_SELECT,
72 .adc_chan_select = &sun4i_gpadc_chan_select,
73 .adc_chan_mask = SUN4I_GPADC_CTRL1_ADC_CHAN_MASK,
76 static const struct gpadc_data sun6i_gpadc_data = {
77 .temp_offset = -1623,
78 .temp_scale = 167,
79 .tp_mode_en = SUN6I_GPADC_CTRL1_TP_MODE_EN,
80 .tp_adc_select = SUN6I_GPADC_CTRL1_TP_ADC_SELECT,
81 .adc_chan_select = &sun6i_gpadc_chan_select,
82 .adc_chan_mask = SUN6I_GPADC_CTRL1_ADC_CHAN_MASK,
85 static const struct gpadc_data sun8i_a33_gpadc_data = {
86 .temp_offset = -1662,
87 .temp_scale = 162,
88 .tp_mode_en = SUN8I_GPADC_CTRL1_CHOP_TEMP_EN,
91 struct sun4i_gpadc_iio {
92 struct iio_dev *indio_dev;
93 struct completion completion;
94 int temp_data;
95 u32 adc_data;
96 struct regmap *regmap;
97 unsigned int fifo_data_irq;
98 atomic_t ignore_fifo_data_irq;
99 unsigned int temp_data_irq;
100 atomic_t ignore_temp_data_irq;
101 const struct gpadc_data *data;
102 bool no_irq;
103 /* prevents concurrent reads of temperature and ADC */
104 struct mutex mutex;
105 struct thermal_zone_device *tzd;
106 struct device *sensor_device;
109 #define SUN4I_GPADC_ADC_CHANNEL(_channel, _name) { \
110 .type = IIO_VOLTAGE, \
111 .indexed = 1, \
112 .channel = _channel, \
113 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
114 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
115 .datasheet_name = _name, \
118 static struct iio_map sun4i_gpadc_hwmon_maps[] = {
120 .adc_channel_label = "temp_adc",
121 .consumer_dev_name = "iio_hwmon.0",
123 { /* sentinel */ },
126 static const struct iio_chan_spec sun4i_gpadc_channels[] = {
127 SUN4I_GPADC_ADC_CHANNEL(0, "adc_chan0"),
128 SUN4I_GPADC_ADC_CHANNEL(1, "adc_chan1"),
129 SUN4I_GPADC_ADC_CHANNEL(2, "adc_chan2"),
130 SUN4I_GPADC_ADC_CHANNEL(3, "adc_chan3"),
132 .type = IIO_TEMP,
133 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
134 BIT(IIO_CHAN_INFO_SCALE) |
135 BIT(IIO_CHAN_INFO_OFFSET),
136 .datasheet_name = "temp_adc",
140 static const struct iio_chan_spec sun4i_gpadc_channels_no_temp[] = {
141 SUN4I_GPADC_ADC_CHANNEL(0, "adc_chan0"),
142 SUN4I_GPADC_ADC_CHANNEL(1, "adc_chan1"),
143 SUN4I_GPADC_ADC_CHANNEL(2, "adc_chan2"),
144 SUN4I_GPADC_ADC_CHANNEL(3, "adc_chan3"),
147 static const struct iio_chan_spec sun8i_a33_gpadc_channels[] = {
149 .type = IIO_TEMP,
150 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
151 BIT(IIO_CHAN_INFO_SCALE) |
152 BIT(IIO_CHAN_INFO_OFFSET),
153 .datasheet_name = "temp_adc",
157 static const struct regmap_config sun4i_gpadc_regmap_config = {
158 .reg_bits = 32,
159 .val_bits = 32,
160 .reg_stride = 4,
161 .fast_io = true,
164 static int sun4i_prepare_for_irq(struct iio_dev *indio_dev, int channel,
165 unsigned int irq)
167 struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
168 int ret;
169 u32 reg;
171 pm_runtime_get_sync(indio_dev->dev.parent);
173 reinit_completion(&info->completion);
175 ret = regmap_write(info->regmap, SUN4I_GPADC_INT_FIFOC,
176 SUN4I_GPADC_INT_FIFOC_TP_FIFO_TRIG_LEVEL(1) |
177 SUN4I_GPADC_INT_FIFOC_TP_FIFO_FLUSH);
178 if (ret)
179 return ret;
181 ret = regmap_read(info->regmap, SUN4I_GPADC_CTRL1, &reg);
182 if (ret)
183 return ret;
185 if (irq == info->fifo_data_irq) {
186 ret = regmap_write(info->regmap, SUN4I_GPADC_CTRL1,
187 info->data->tp_mode_en |
188 info->data->tp_adc_select |
189 info->data->adc_chan_select(channel));
191 * When the IP changes channel, it needs a bit of time to get
192 * correct values.
194 if ((reg & info->data->adc_chan_mask) !=
195 info->data->adc_chan_select(channel))
196 mdelay(10);
198 } else {
200 * The temperature sensor returns valid data only when the ADC
201 * operates in touchscreen mode.
203 ret = regmap_write(info->regmap, SUN4I_GPADC_CTRL1,
204 info->data->tp_mode_en);
207 if (ret)
208 return ret;
211 * When the IP changes mode between ADC or touchscreen, it
212 * needs a bit of time to get correct values.
214 if ((reg & info->data->tp_adc_select) != info->data->tp_adc_select)
215 mdelay(100);
217 return 0;
220 static int sun4i_gpadc_read(struct iio_dev *indio_dev, int channel, int *val,
221 unsigned int irq)
223 struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
224 int ret;
226 mutex_lock(&info->mutex);
228 ret = sun4i_prepare_for_irq(indio_dev, channel, irq);
229 if (ret)
230 goto err;
232 enable_irq(irq);
235 * The temperature sensor throws an interruption periodically (currently
236 * set at periods of ~0.6s in sun4i_gpadc_runtime_resume). A 1s delay
237 * makes sure an interruption occurs in normal conditions. If it doesn't
238 * occur, then there is a timeout.
240 if (!wait_for_completion_timeout(&info->completion,
241 msecs_to_jiffies(1000))) {
242 ret = -ETIMEDOUT;
243 goto err;
246 if (irq == info->fifo_data_irq)
247 *val = info->adc_data;
248 else
249 *val = info->temp_data;
251 ret = 0;
252 pm_runtime_mark_last_busy(indio_dev->dev.parent);
254 err:
255 pm_runtime_put_autosuspend(indio_dev->dev.parent);
256 disable_irq(irq);
257 mutex_unlock(&info->mutex);
259 return ret;
262 static int sun4i_gpadc_adc_read(struct iio_dev *indio_dev, int channel,
263 int *val)
265 struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
267 return sun4i_gpadc_read(indio_dev, channel, val, info->fifo_data_irq);
270 static int sun4i_gpadc_temp_read(struct iio_dev *indio_dev, int *val)
272 struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
274 if (info->no_irq) {
275 pm_runtime_get_sync(indio_dev->dev.parent);
277 regmap_read(info->regmap, SUN4I_GPADC_TEMP_DATA, val);
279 pm_runtime_mark_last_busy(indio_dev->dev.parent);
280 pm_runtime_put_autosuspend(indio_dev->dev.parent);
282 return 0;
285 return sun4i_gpadc_read(indio_dev, 0, val, info->temp_data_irq);
288 static int sun4i_gpadc_temp_offset(struct iio_dev *indio_dev, int *val)
290 struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
292 *val = info->data->temp_offset;
294 return 0;
297 static int sun4i_gpadc_temp_scale(struct iio_dev *indio_dev, int *val)
299 struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
301 *val = info->data->temp_scale;
303 return 0;
306 static int sun4i_gpadc_read_raw(struct iio_dev *indio_dev,
307 struct iio_chan_spec const *chan, int *val,
308 int *val2, long mask)
310 int ret;
312 switch (mask) {
313 case IIO_CHAN_INFO_OFFSET:
314 ret = sun4i_gpadc_temp_offset(indio_dev, val);
315 if (ret)
316 return ret;
318 return IIO_VAL_INT;
319 case IIO_CHAN_INFO_RAW:
320 if (chan->type == IIO_VOLTAGE)
321 ret = sun4i_gpadc_adc_read(indio_dev, chan->channel,
322 val);
323 else
324 ret = sun4i_gpadc_temp_read(indio_dev, val);
326 if (ret)
327 return ret;
329 return IIO_VAL_INT;
330 case IIO_CHAN_INFO_SCALE:
331 if (chan->type == IIO_VOLTAGE) {
332 /* 3000mV / 4096 * raw */
333 *val = 0;
334 *val2 = 732421875;
335 return IIO_VAL_INT_PLUS_NANO;
338 ret = sun4i_gpadc_temp_scale(indio_dev, val);
339 if (ret)
340 return ret;
342 return IIO_VAL_INT;
343 default:
344 return -EINVAL;
347 return -EINVAL;
350 static const struct iio_info sun4i_gpadc_iio_info = {
351 .read_raw = sun4i_gpadc_read_raw,
354 static irqreturn_t sun4i_gpadc_temp_data_irq_handler(int irq, void *dev_id)
356 struct sun4i_gpadc_iio *info = dev_id;
358 if (atomic_read(&info->ignore_temp_data_irq))
359 goto out;
361 if (!regmap_read(info->regmap, SUN4I_GPADC_TEMP_DATA, &info->temp_data))
362 complete(&info->completion);
364 out:
365 return IRQ_HANDLED;
368 static irqreturn_t sun4i_gpadc_fifo_data_irq_handler(int irq, void *dev_id)
370 struct sun4i_gpadc_iio *info = dev_id;
372 if (atomic_read(&info->ignore_fifo_data_irq))
373 goto out;
375 if (!regmap_read(info->regmap, SUN4I_GPADC_DATA, &info->adc_data))
376 complete(&info->completion);
378 out:
379 return IRQ_HANDLED;
382 static int sun4i_gpadc_runtime_suspend(struct device *dev)
384 struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
386 /* Disable the ADC on IP */
387 regmap_write(info->regmap, SUN4I_GPADC_CTRL1, 0);
388 /* Disable temperature sensor on IP */
389 regmap_write(info->regmap, SUN4I_GPADC_TPR, 0);
391 return 0;
394 static int sun4i_gpadc_runtime_resume(struct device *dev)
396 struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
398 /* clkin = 6MHz */
399 regmap_write(info->regmap, SUN4I_GPADC_CTRL0,
400 SUN4I_GPADC_CTRL0_ADC_CLK_DIVIDER(2) |
401 SUN4I_GPADC_CTRL0_FS_DIV(7) |
402 SUN4I_GPADC_CTRL0_T_ACQ(63));
403 regmap_write(info->regmap, SUN4I_GPADC_CTRL1, info->data->tp_mode_en);
404 regmap_write(info->regmap, SUN4I_GPADC_CTRL3,
405 SUN4I_GPADC_CTRL3_FILTER_EN |
406 SUN4I_GPADC_CTRL3_FILTER_TYPE(1));
407 /* period = SUN4I_GPADC_TPR_TEMP_PERIOD * 256 * 16 / clkin; ~0.6s */
408 regmap_write(info->regmap, SUN4I_GPADC_TPR,
409 SUN4I_GPADC_TPR_TEMP_ENABLE |
410 SUN4I_GPADC_TPR_TEMP_PERIOD(800));
412 return 0;
415 static int sun4i_gpadc_get_temp(void *data, int *temp)
417 struct sun4i_gpadc_iio *info = data;
418 int val, scale, offset;
420 if (sun4i_gpadc_temp_read(info->indio_dev, &val))
421 return -ETIMEDOUT;
423 sun4i_gpadc_temp_scale(info->indio_dev, &scale);
424 sun4i_gpadc_temp_offset(info->indio_dev, &offset);
426 *temp = (val + offset) * scale;
428 return 0;
431 static const struct thermal_zone_of_device_ops sun4i_ts_tz_ops = {
432 .get_temp = &sun4i_gpadc_get_temp,
435 static const struct dev_pm_ops sun4i_gpadc_pm_ops = {
436 .runtime_suspend = &sun4i_gpadc_runtime_suspend,
437 .runtime_resume = &sun4i_gpadc_runtime_resume,
440 static int sun4i_irq_init(struct platform_device *pdev, const char *name,
441 irq_handler_t handler, const char *devname,
442 unsigned int *irq, atomic_t *atomic)
444 int ret;
445 struct sun4i_gpadc_dev *mfd_dev = dev_get_drvdata(pdev->dev.parent);
446 struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(&pdev->dev));
449 * Once the interrupt is activated, the IP continuously performs
450 * conversions thus throws interrupts. The interrupt is activated right
451 * after being requested but we want to control when these interrupts
452 * occur thus we disable it right after being requested. However, an
453 * interrupt might occur between these two instructions and we have to
454 * make sure that does not happen, by using atomic flags. We set the
455 * flag before requesting the interrupt and unset it right after
456 * disabling the interrupt. When an interrupt occurs between these two
457 * instructions, reading the atomic flag will tell us to ignore the
458 * interrupt.
460 atomic_set(atomic, 1);
462 ret = platform_get_irq_byname(pdev, name);
463 if (ret < 0)
464 return ret;
466 ret = regmap_irq_get_virq(mfd_dev->regmap_irqc, ret);
467 if (ret < 0) {
468 dev_err(&pdev->dev, "failed to get virq for irq %s\n", name);
469 return ret;
472 *irq = ret;
473 ret = devm_request_any_context_irq(&pdev->dev, *irq, handler, 0,
474 devname, info);
475 if (ret < 0) {
476 dev_err(&pdev->dev, "could not request %s interrupt: %d\n",
477 name, ret);
478 return ret;
481 disable_irq(*irq);
482 atomic_set(atomic, 0);
484 return 0;
487 static const struct of_device_id sun4i_gpadc_of_id[] = {
489 .compatible = "allwinner,sun8i-a33-ths",
490 .data = &sun8i_a33_gpadc_data,
492 { /* sentinel */ }
495 static int sun4i_gpadc_probe_dt(struct platform_device *pdev,
496 struct iio_dev *indio_dev)
498 struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
499 struct resource *mem;
500 void __iomem *base;
501 int ret;
503 info->data = of_device_get_match_data(&pdev->dev);
504 if (!info->data)
505 return -ENODEV;
507 info->no_irq = true;
508 indio_dev->num_channels = ARRAY_SIZE(sun8i_a33_gpadc_channels);
509 indio_dev->channels = sun8i_a33_gpadc_channels;
511 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
512 base = devm_ioremap_resource(&pdev->dev, mem);
513 if (IS_ERR(base))
514 return PTR_ERR(base);
516 info->regmap = devm_regmap_init_mmio(&pdev->dev, base,
517 &sun4i_gpadc_regmap_config);
518 if (IS_ERR(info->regmap)) {
519 ret = PTR_ERR(info->regmap);
520 dev_err(&pdev->dev, "failed to init regmap: %d\n", ret);
521 return ret;
524 if (IS_ENABLED(CONFIG_THERMAL_OF))
525 info->sensor_device = &pdev->dev;
527 return 0;
530 static int sun4i_gpadc_probe_mfd(struct platform_device *pdev,
531 struct iio_dev *indio_dev)
533 struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
534 struct sun4i_gpadc_dev *sun4i_gpadc_dev =
535 dev_get_drvdata(pdev->dev.parent);
536 int ret;
538 info->no_irq = false;
539 info->regmap = sun4i_gpadc_dev->regmap;
541 indio_dev->num_channels = ARRAY_SIZE(sun4i_gpadc_channels);
542 indio_dev->channels = sun4i_gpadc_channels;
544 info->data = (struct gpadc_data *)platform_get_device_id(pdev)->driver_data;
547 * Since the controller needs to be in touchscreen mode for its thermal
548 * sensor to operate properly, and that switching between the two modes
549 * needs a delay, always registering in the thermal framework will
550 * significantly slow down the conversion rate of the ADCs.
552 * Therefore, instead of depending on THERMAL_OF in Kconfig, we only
553 * register the sensor if that option is enabled, eventually leaving
554 * that choice to the user.
557 if (IS_ENABLED(CONFIG_THERMAL_OF)) {
559 * This driver is a child of an MFD which has a node in the DT
560 * but not its children, because of DT backward compatibility
561 * for A10, A13 and A31 SoCs. Therefore, the resulting devices
562 * of this driver do not have an of_node variable.
563 * However, its parent (the MFD driver) has an of_node variable
564 * and since devm_thermal_zone_of_sensor_register uses its first
565 * argument to match the phandle defined in the node of the
566 * thermal driver with the of_node of the device passed as first
567 * argument and the third argument to call ops from
568 * thermal_zone_of_device_ops, the solution is to use the parent
569 * device as first argument to match the phandle with its
570 * of_node, and the device from this driver as third argument to
571 * return the temperature.
573 info->sensor_device = pdev->dev.parent;
574 } else {
575 indio_dev->num_channels =
576 ARRAY_SIZE(sun4i_gpadc_channels_no_temp);
577 indio_dev->channels = sun4i_gpadc_channels_no_temp;
580 if (IS_ENABLED(CONFIG_THERMAL_OF)) {
581 ret = sun4i_irq_init(pdev, "TEMP_DATA_PENDING",
582 sun4i_gpadc_temp_data_irq_handler,
583 "temp_data", &info->temp_data_irq,
584 &info->ignore_temp_data_irq);
585 if (ret < 0)
586 return ret;
589 ret = sun4i_irq_init(pdev, "FIFO_DATA_PENDING",
590 sun4i_gpadc_fifo_data_irq_handler, "fifo_data",
591 &info->fifo_data_irq, &info->ignore_fifo_data_irq);
592 if (ret < 0)
593 return ret;
595 if (IS_ENABLED(CONFIG_THERMAL_OF)) {
596 ret = iio_map_array_register(indio_dev, sun4i_gpadc_hwmon_maps);
597 if (ret < 0) {
598 dev_err(&pdev->dev,
599 "failed to register iio map array\n");
600 return ret;
604 return 0;
607 static int sun4i_gpadc_probe(struct platform_device *pdev)
609 struct sun4i_gpadc_iio *info;
610 struct iio_dev *indio_dev;
611 int ret;
613 indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
614 if (!indio_dev)
615 return -ENOMEM;
617 info = iio_priv(indio_dev);
618 platform_set_drvdata(pdev, indio_dev);
620 mutex_init(&info->mutex);
621 info->indio_dev = indio_dev;
622 init_completion(&info->completion);
623 indio_dev->name = dev_name(&pdev->dev);
624 indio_dev->dev.parent = &pdev->dev;
625 indio_dev->dev.of_node = pdev->dev.of_node;
626 indio_dev->info = &sun4i_gpadc_iio_info;
627 indio_dev->modes = INDIO_DIRECT_MODE;
629 if (pdev->dev.of_node)
630 ret = sun4i_gpadc_probe_dt(pdev, indio_dev);
631 else
632 ret = sun4i_gpadc_probe_mfd(pdev, indio_dev);
634 if (ret)
635 return ret;
637 pm_runtime_set_autosuspend_delay(&pdev->dev,
638 SUN4I_GPADC_AUTOSUSPEND_DELAY);
639 pm_runtime_use_autosuspend(&pdev->dev);
640 pm_runtime_set_suspended(&pdev->dev);
641 pm_runtime_enable(&pdev->dev);
643 if (IS_ENABLED(CONFIG_THERMAL_OF)) {
644 info->tzd = thermal_zone_of_sensor_register(info->sensor_device,
645 0, info,
646 &sun4i_ts_tz_ops);
648 * Do not fail driver probing when failing to register in
649 * thermal because no thermal DT node is found.
651 if (IS_ERR(info->tzd) && PTR_ERR(info->tzd) != -ENODEV) {
652 dev_err(&pdev->dev,
653 "could not register thermal sensor: %ld\n",
654 PTR_ERR(info->tzd));
655 return PTR_ERR(info->tzd);
659 ret = devm_iio_device_register(&pdev->dev, indio_dev);
660 if (ret < 0) {
661 dev_err(&pdev->dev, "could not register the device\n");
662 goto err_map;
665 return 0;
667 err_map:
668 if (!info->no_irq && IS_ENABLED(CONFIG_THERMAL_OF))
669 iio_map_array_unregister(indio_dev);
671 pm_runtime_put(&pdev->dev);
672 pm_runtime_disable(&pdev->dev);
674 return ret;
677 static int sun4i_gpadc_remove(struct platform_device *pdev)
679 struct iio_dev *indio_dev = platform_get_drvdata(pdev);
680 struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
682 pm_runtime_put(&pdev->dev);
683 pm_runtime_disable(&pdev->dev);
685 if (!IS_ENABLED(CONFIG_THERMAL_OF))
686 return 0;
688 thermal_zone_of_sensor_unregister(info->sensor_device, info->tzd);
690 if (!info->no_irq)
691 iio_map_array_unregister(indio_dev);
693 return 0;
696 static const struct platform_device_id sun4i_gpadc_id[] = {
697 { "sun4i-a10-gpadc-iio", (kernel_ulong_t)&sun4i_gpadc_data },
698 { "sun5i-a13-gpadc-iio", (kernel_ulong_t)&sun5i_gpadc_data },
699 { "sun6i-a31-gpadc-iio", (kernel_ulong_t)&sun6i_gpadc_data },
700 { /* sentinel */ },
702 MODULE_DEVICE_TABLE(platform, sun4i_gpadc_id);
704 static struct platform_driver sun4i_gpadc_driver = {
705 .driver = {
706 .name = "sun4i-gpadc-iio",
707 .of_match_table = sun4i_gpadc_of_id,
708 .pm = &sun4i_gpadc_pm_ops,
710 .id_table = sun4i_gpadc_id,
711 .probe = sun4i_gpadc_probe,
712 .remove = sun4i_gpadc_remove,
714 MODULE_DEVICE_TABLE(of, sun4i_gpadc_of_id);
716 module_platform_driver(sun4i_gpadc_driver);
718 MODULE_DESCRIPTION("ADC driver for sunxi platforms");
719 MODULE_AUTHOR("Quentin Schulz <quentin.schulz@free-electrons.com>");
720 MODULE_LICENSE("GPL v2");