kobject: introduce kobj_completion

[linux/fpc-iii.git] / drivers / acpi / acpica / evgpeblk.c

/******************************************************************************
 *
 * Module Name: evgpeblk - GPE block creation and initialization.
 *
 *****************************************************************************/

/*
 * Copyright (C) 2000 - 2013, Intel Corp.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 */

#include <acpi/acpi.h>
#include "accommon.h"
#include "acevents.h"
#include "acnamesp.h"

#define _COMPONENT          ACPI_EVENTS
ACPI_MODULE_NAME("evgpeblk")
#if (!ACPI_REDUCED_HARDWARE)    /* Entire module */
/* Local prototypes */
static acpi_status
acpi_ev_install_gpe_block(struct acpi_gpe_block_info *gpe_block,
                          u32 interrupt_number);

static acpi_status
acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block);

/*******************************************************************************
 *
 * FUNCTION:    acpi_ev_install_gpe_block
 *
 * PARAMETERS:  gpe_block               - New GPE block
 *              interrupt_number        - Xrupt to be associated with this
 *                                        GPE block
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Install new GPE block with mutex support
 *
 ******************************************************************************/

static acpi_status
acpi_ev_install_gpe_block(struct acpi_gpe_block_info *gpe_block,
                          u32 interrupt_number)
{
        struct acpi_gpe_block_info *next_gpe_block;
        struct acpi_gpe_xrupt_info *gpe_xrupt_block;
        acpi_status status;
        acpi_cpu_flags flags;

        ACPI_FUNCTION_TRACE(ev_install_gpe_block);

        status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
        if (ACPI_FAILURE(status)) {
                return_ACPI_STATUS(status);
        }

        gpe_xrupt_block = acpi_ev_get_gpe_xrupt_block(interrupt_number);
        if (!gpe_xrupt_block) {
                status = AE_NO_MEMORY;
                goto unlock_and_exit;
        }

        /* Install the new block at the end of the list with lock */

        flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
        if (gpe_xrupt_block->gpe_block_list_head) {
                next_gpe_block = gpe_xrupt_block->gpe_block_list_head;
                while (next_gpe_block->next) {
                        next_gpe_block = next_gpe_block->next;
                }

                next_gpe_block->next = gpe_block;
                gpe_block->previous = next_gpe_block;
        } else {
                gpe_xrupt_block->gpe_block_list_head = gpe_block;
        }

        gpe_block->xrupt_block = gpe_xrupt_block;
        acpi_os_release_lock(acpi_gbl_gpe_lock, flags);

      unlock_and_exit:
        status = acpi_ut_release_mutex(ACPI_MTX_EVENTS);
        return_ACPI_STATUS(status);
}

/*******************************************************************************
 *
 * FUNCTION:    acpi_ev_delete_gpe_block
 *
 * PARAMETERS:  gpe_block           - Existing GPE block
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Remove a GPE block
 *
 ******************************************************************************/

acpi_status acpi_ev_delete_gpe_block(struct acpi_gpe_block_info *gpe_block)
{
        acpi_status status;
        acpi_cpu_flags flags;

        ACPI_FUNCTION_TRACE(ev_install_gpe_block);

        status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
        if (ACPI_FAILURE(status)) {
                return_ACPI_STATUS(status);
        }

        /* Disable all GPEs in this block */

        status =
            acpi_hw_disable_gpe_block(gpe_block->xrupt_block, gpe_block, NULL);

        if (!gpe_block->previous && !gpe_block->next) {

                /* This is the last gpe_block on this interrupt */

                status = acpi_ev_delete_gpe_xrupt(gpe_block->xrupt_block);
                if (ACPI_FAILURE(status)) {
                        goto unlock_and_exit;
                }
        } else {
                /* Remove the block on this interrupt with lock */

                flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
                if (gpe_block->previous) {
                        gpe_block->previous->next = gpe_block->next;
                } else {
                        gpe_block->xrupt_block->gpe_block_list_head =
                            gpe_block->next;
                }

                if (gpe_block->next) {
                        gpe_block->next->previous = gpe_block->previous;
                }
                acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
        }

        acpi_current_gpe_count -= gpe_block->gpe_count;

        /* Free the gpe_block */

        ACPI_FREE(gpe_block->register_info);
        ACPI_FREE(gpe_block->event_info);
        ACPI_FREE(gpe_block);

      unlock_and_exit:
        status = acpi_ut_release_mutex(ACPI_MTX_EVENTS);
        return_ACPI_STATUS(status);
}

/*******************************************************************************
 *
 * FUNCTION:    acpi_ev_create_gpe_info_blocks
 *
 * PARAMETERS:  gpe_block   - New GPE block
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Create the register_info and event_info blocks for this GPE block
 *
 ******************************************************************************/

static acpi_status
acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block)
{
        struct acpi_gpe_register_info *gpe_register_info = NULL;
        struct acpi_gpe_event_info *gpe_event_info = NULL;
        struct acpi_gpe_event_info *this_event;
        struct acpi_gpe_register_info *this_register;
        u32 i;
        u32 j;
        acpi_status status;

        ACPI_FUNCTION_TRACE(ev_create_gpe_info_blocks);

        /* Allocate the GPE register information block */

        gpe_register_info = ACPI_ALLOCATE_ZEROED((acpi_size) gpe_block->
                                                 register_count *
                                                 sizeof(struct
                                                        acpi_gpe_register_info));
        if (!gpe_register_info) {
                ACPI_ERROR((AE_INFO,
                            "Could not allocate the GpeRegisterInfo table"));
                return_ACPI_STATUS(AE_NO_MEMORY);
        }

        /*
         * Allocate the GPE event_info block. There are eight distinct GPEs
         * per register. Initialization to zeros is sufficient.
         */
        gpe_event_info = ACPI_ALLOCATE_ZEROED((acpi_size) gpe_block->gpe_count *
                                              sizeof(struct
                                                     acpi_gpe_event_info));
        if (!gpe_event_info) {
                ACPI_ERROR((AE_INFO,
                            "Could not allocate the GpeEventInfo table"));
                status = AE_NO_MEMORY;
                goto error_exit;
        }

        /* Save the new Info arrays in the GPE block */

        gpe_block->register_info = gpe_register_info;
        gpe_block->event_info = gpe_event_info;

        /*
         * Initialize the GPE Register and Event structures. A goal of these
         * tables is to hide the fact that there are two separate GPE register
         * sets in a given GPE hardware block, the status registers occupy the
         * first half, and the enable registers occupy the second half.
         */
        this_register = gpe_register_info;
        this_event = gpe_event_info;

        for (i = 0; i < gpe_block->register_count; i++) {

                /* Init the register_info for this GPE register (8 GPEs) */

                this_register->base_gpe_number =
                    (u8) (gpe_block->block_base_number +
                          (i * ACPI_GPE_REGISTER_WIDTH));

                this_register->status_address.address =
                    gpe_block->block_address.address + i;

                this_register->enable_address.address =
                    gpe_block->block_address.address + i +
                    gpe_block->register_count;

                this_register->status_address.space_id =
                    gpe_block->block_address.space_id;
                this_register->enable_address.space_id =
                    gpe_block->block_address.space_id;
                this_register->status_address.bit_width =
                    ACPI_GPE_REGISTER_WIDTH;
                this_register->enable_address.bit_width =
                    ACPI_GPE_REGISTER_WIDTH;
                this_register->status_address.bit_offset = 0;
                this_register->enable_address.bit_offset = 0;

                /* Init the event_info for each GPE within this register */

                for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) {
                        this_event->gpe_number =
                            (u8) (this_register->base_gpe_number + j);
                        this_event->register_info = this_register;
                        this_event++;
                }

                /* Disable all GPEs within this register */

                status = acpi_hw_write(0x00, &this_register->enable_address);
                if (ACPI_FAILURE(status)) {
                        goto error_exit;
                }

                /* Clear any pending GPE events within this register */

                status = acpi_hw_write(0xFF, &this_register->status_address);
                if (ACPI_FAILURE(status)) {
                        goto error_exit;
                }

                this_register++;
        }

        return_ACPI_STATUS(AE_OK);

      error_exit:
        if (gpe_register_info) {
                ACPI_FREE(gpe_register_info);
        }
        if (gpe_event_info) {
                ACPI_FREE(gpe_event_info);
        }

        return_ACPI_STATUS(status);
}

/*******************************************************************************
 *
 * FUNCTION:    acpi_ev_create_gpe_block
 *
 * PARAMETERS:  gpe_device          - Handle to the parent GPE block
 *              gpe_block_address   - Address and space_ID
 *              register_count      - Number of GPE register pairs in the block
 *              gpe_block_base_number - Starting GPE number for the block
 *              interrupt_number    - H/W interrupt for the block
 *              return_gpe_block    - Where the new block descriptor is returned
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Create and Install a block of GPE registers. All GPEs within
 *              the block are disabled at exit.
 *              Note: Assumes namespace is locked.
 *
 ******************************************************************************/

acpi_status
acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device,
                         struct acpi_generic_address *gpe_block_address,
                         u32 register_count,
                         u8 gpe_block_base_number,
                         u32 interrupt_number,
                         struct acpi_gpe_block_info **return_gpe_block)
{
        acpi_status status;
        struct acpi_gpe_block_info *gpe_block;
        struct acpi_gpe_walk_info walk_info;

        ACPI_FUNCTION_TRACE(ev_create_gpe_block);

        if (!register_count) {
                return_ACPI_STATUS(AE_OK);
        }

        /* Allocate a new GPE block */

        gpe_block = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_gpe_block_info));
        if (!gpe_block) {
                return_ACPI_STATUS(AE_NO_MEMORY);
        }

        /* Initialize the new GPE block */

        gpe_block->node = gpe_device;
        gpe_block->gpe_count = (u16)(register_count * ACPI_GPE_REGISTER_WIDTH);
        gpe_block->initialized = FALSE;
        gpe_block->register_count = register_count;
        gpe_block->block_base_number = gpe_block_base_number;

        ACPI_MEMCPY(&gpe_block->block_address, gpe_block_address,
                    sizeof(struct acpi_generic_address));

        /*
         * Create the register_info and event_info sub-structures
         * Note: disables and clears all GPEs in the block
         */
        status = acpi_ev_create_gpe_info_blocks(gpe_block);
        if (ACPI_FAILURE(status)) {
                ACPI_FREE(gpe_block);
                return_ACPI_STATUS(status);
        }

        /* Install the new block in the global lists */

        status = acpi_ev_install_gpe_block(gpe_block, interrupt_number);
        if (ACPI_FAILURE(status)) {
                ACPI_FREE(gpe_block->register_info);
                ACPI_FREE(gpe_block->event_info);
                ACPI_FREE(gpe_block);
                return_ACPI_STATUS(status);
        }

        acpi_gbl_all_gpes_initialized = FALSE;

        /* Find all GPE methods (_Lxx or_Exx) for this block */

        walk_info.gpe_block = gpe_block;
        walk_info.gpe_device = gpe_device;
        walk_info.execute_by_owner_id = FALSE;

        status = acpi_ns_walk_namespace(ACPI_TYPE_METHOD, gpe_device,
                                        ACPI_UINT32_MAX, ACPI_NS_WALK_NO_UNLOCK,
                                        acpi_ev_match_gpe_method, NULL,
                                        &walk_info, NULL);

        /* Return the new block */

        if (return_gpe_block) {
                (*return_gpe_block) = gpe_block;
        }

        ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
                              "    Initialized GPE %02X to %02X [%4.4s] %u regs on interrupt 0x%X\n",
                              (u32)gpe_block->block_base_number,
                              (u32)(gpe_block->block_base_number +
                                    (gpe_block->gpe_count - 1)),
                              gpe_device->name.ascii, gpe_block->register_count,
                              interrupt_number));

        /* Update global count of currently available GPEs */

        acpi_current_gpe_count += gpe_block->gpe_count;
        return_ACPI_STATUS(AE_OK);
}

/*******************************************************************************
 *
 * FUNCTION:    acpi_ev_initialize_gpe_block
 *
 * PARAMETERS:  acpi_gpe_callback
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Initialize and enable a GPE block. Enable GPEs that have
 *              associated methods.
 *              Note: Assumes namespace is locked.
 *
 ******************************************************************************/

acpi_status
acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
                             struct acpi_gpe_block_info *gpe_block,
                             void *ignored)
{
        acpi_status status;
        struct acpi_gpe_event_info *gpe_event_info;
        u32 gpe_enabled_count;
        u32 gpe_index;
        u32 i;
        u32 j;

        ACPI_FUNCTION_TRACE(ev_initialize_gpe_block);

        /*
         * Ignore a null GPE block (e.g., if no GPE block 1 exists), and
         * any GPE blocks that have been initialized already.
         */
        if (!gpe_block || gpe_block->initialized) {
                return_ACPI_STATUS(AE_OK);
        }

        /*
         * Enable all GPEs that have a corresponding method and have the
         * ACPI_GPE_CAN_WAKE flag unset. Any other GPEs within this block
         * must be enabled via the acpi_enable_gpe() interface.
         */
        gpe_enabled_count = 0;

        for (i = 0; i < gpe_block->register_count; i++) {
                for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) {

                        /* Get the info block for this particular GPE */

                        gpe_index = (i * ACPI_GPE_REGISTER_WIDTH) + j;
                        gpe_event_info = &gpe_block->event_info[gpe_index];

                        /*
                         * Ignore GPEs that have no corresponding _Lxx/_Exx method
                         * and GPEs that are used to wake the system
                         */
                        if (((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
                             ACPI_GPE_DISPATCH_NONE)
                            || ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)
                                == ACPI_GPE_DISPATCH_HANDLER)
                            || (gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) {
                                continue;
                        }

                        status = acpi_ev_add_gpe_reference(gpe_event_info);
                        if (ACPI_FAILURE(status)) {
                                ACPI_EXCEPTION((AE_INFO, status,
                                        "Could not enable GPE 0x%02X",
                                        gpe_index +
                                        gpe_block->block_base_number));
                                continue;
                        }

                        gpe_enabled_count++;
                }
        }

        if (gpe_enabled_count) {
                ACPI_INFO((AE_INFO,
                           "Enabled %u GPEs in block %02X to %02X",
                           gpe_enabled_count, (u32)gpe_block->block_base_number,
                           (u32)(gpe_block->block_base_number +
                                 (gpe_block->gpe_count - 1))));
        }

        gpe_block->initialized = TRUE;

        return_ACPI_STATUS(AE_OK);
}

#endif                          /* !ACPI_REDUCED_HARDWARE */