4 * Copyright (C) 2012 Ezequiel Garcia
5 * <elezegarcia--a.t--gmail.com>
7 * Based on Easycap driver by R.M. Thomas
8 * Copyright (C) 2010 R.M. Thomas
9 * <rmthomas--a.t--sciolus.org>
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
24 #define STK1160_GCTRL 0x000
26 /* Remote Wakup Control */
27 #define STK1160_RMCTL 0x00c
30 * Decoder Control Register:
31 * This byte controls capture start/stop
32 * with bit #7 (0x?? OR 0x80 to activate).
34 #define STK1160_DCTRL 0x100
36 /* Capture Frame Start Position */
37 #define STK116_CFSPO 0x110
38 #define STK116_CFSPO_STX_L 0x110
39 #define STK116_CFSPO_STX_H 0x111
40 #define STK116_CFSPO_STY_L 0x112
41 #define STK116_CFSPO_STY_H 0x113
43 /* Capture Frame End Position */
44 #define STK116_CFEPO 0x114
45 #define STK116_CFEPO_ENX_L 0x114
46 #define STK116_CFEPO_ENX_H 0x115
47 #define STK116_CFEPO_ENY_L 0x116
48 #define STK116_CFEPO_ENY_H 0x117
50 /* Serial Interface Control */
51 #define STK1160_SICTL 0x200
52 #define STK1160_SICTL_CD 0x202
53 #define STK1160_SICTL_SDA 0x203
55 /* Serial Bus Write */
56 #define STK1160_SBUSW 0x204
57 #define STK1160_SBUSW_WA 0x204
58 #define STK1160_SBUSW_WD 0x205
61 #define STK1160_SBUSR 0x208
62 #define STK1160_SBUSR_RA 0x208
63 #define STK1160_SBUSR_RD 0x209
65 /* Alternate Serial Inteface Control */
66 #define STK1160_ASIC 0x2fc
68 /* PLL Select Options */
69 #define STK1160_PLLSO 0x018
71 /* PLL Frequency Divider */
72 #define STK1160_PLLFD 0x01c
74 /* Timing Generator */
75 #define STK1160_TIGEN 0x300
77 /* Timing Control Parameter */
78 #define STK1160_TICTL 0x350
80 /* AC97 Audio Control */
81 #define STK1160_AC97CTL_0 0x500
82 #define STK1160_AC97CTL_1 0x504
84 /* Use [0:6] bits of register 0x504 to set codec command address */
85 #define STK1160_AC97_ADDR 0x504
86 /* Use [16:31] bits of register 0x500 to set codec command data */
87 #define STK1160_AC97_CMD 0x502
89 /* Audio I2S Interface */
90 #define STK1160_I2SCTL 0x50c
92 /* EEPROM Interface */
93 #define STK1160_EEPROM_SZ 0x5f0