IB/uverbs: Fix device cleanup
[linux/fpc-iii.git] / drivers / staging / fwserial / fwserial.c
blob41a49c8194e50c2bdaf81c782613255ac1fe1bbd
1 /*
2 * FireWire Serial driver
4 * Copyright (C) 2012 Peter Hurley <peter@hurleysoftware.com>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
17 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
19 #include <linux/sched.h>
20 #include <linux/slab.h>
21 #include <linux/device.h>
22 #include <linux/mod_devicetable.h>
23 #include <linux/rculist.h>
24 #include <linux/workqueue.h>
25 #include <linux/ratelimit.h>
26 #include <linux/bug.h>
27 #include <linux/uaccess.h>
29 #include "fwserial.h"
31 #define be32_to_u64(hi, lo) ((u64)be32_to_cpu(hi) << 32 | be32_to_cpu(lo))
33 #define LINUX_VENDOR_ID 0xd00d1eU /* same id used in card root directory */
34 #define FWSERIAL_VERSION 0x00e81cU /* must be unique within LINUX_VENDOR_ID */
36 /* configurable options */
37 static int num_ttys = 4; /* # of std ttys to create per fw_card */
38 /* - doubles as loopback port index */
39 static bool auto_connect = true; /* try to VIRT_CABLE to every peer */
40 static bool create_loop_dev = true; /* create a loopback device for each card */
42 module_param_named(ttys, num_ttys, int, 0644);
43 module_param_named(auto, auto_connect, bool, 0644);
44 module_param_named(loop, create_loop_dev, bool, 0644);
47 * Threshold below which the tty is woken for writing
48 * - should be equal to WAKEUP_CHARS in drivers/tty/n_tty.c because
49 * even if the writer is woken, n_tty_poll() won't set POLLOUT until
50 * our fifo is below this level
52 #define WAKEUP_CHARS 256
54 /**
55 * fwserial_list: list of every fw_serial created for each fw_card
56 * See discussion in fwserial_probe.
58 static LIST_HEAD(fwserial_list);
59 static DEFINE_MUTEX(fwserial_list_mutex);
61 /**
62 * port_table: array of tty ports allocated to each fw_card
64 * tty ports are allocated during probe when an fw_serial is first
65 * created for a given fw_card. Ports are allocated in a contiguous block,
66 * each block consisting of 'num_ports' ports.
68 static struct fwtty_port *port_table[MAX_TOTAL_PORTS];
69 static DEFINE_MUTEX(port_table_lock);
70 static bool port_table_corrupt;
71 #define FWTTY_INVALID_INDEX MAX_TOTAL_PORTS
73 #define loop_idx(port) (((port)->index) / num_ports)
74 #define table_idx(loop) ((loop) * num_ports + num_ttys)
76 /* total # of tty ports created per fw_card */
77 static int num_ports;
79 /* slab used as pool for struct fwtty_transactions */
80 static struct kmem_cache *fwtty_txn_cache;
82 struct tty_driver *fwtty_driver;
83 static struct tty_driver *fwloop_driver;
85 static struct dentry *fwserial_debugfs;
87 struct fwtty_transaction;
88 typedef void (*fwtty_transaction_cb)(struct fw_card *card, int rcode,
89 void *data, size_t length,
90 struct fwtty_transaction *txn);
92 struct fwtty_transaction {
93 struct fw_transaction fw_txn;
94 fwtty_transaction_cb callback;
95 struct fwtty_port *port;
96 union {
97 struct dma_pending dma_pended;
101 #define to_device(a, b) (a->b)
102 #define fwtty_err(p, fmt, ...) \
103 dev_err(to_device(p, device), fmt, ##__VA_ARGS__)
104 #define fwtty_info(p, fmt, ...) \
105 dev_info(to_device(p, device), fmt, ##__VA_ARGS__)
106 #define fwtty_notice(p, fmt, ...) \
107 dev_notice(to_device(p, device), fmt, ##__VA_ARGS__)
108 #define fwtty_dbg(p, fmt, ...) \
109 dev_dbg(to_device(p, device), "%s: " fmt, __func__, ##__VA_ARGS__)
110 #define fwtty_err_ratelimited(p, fmt, ...) \
111 dev_err_ratelimited(to_device(p, device), fmt, ##__VA_ARGS__)
113 #ifdef DEBUG
114 static inline void debug_short_write(struct fwtty_port *port, int c, int n)
116 int avail;
118 if (n < c) {
119 spin_lock_bh(&port->lock);
120 avail = dma_fifo_avail(&port->tx_fifo);
121 spin_unlock_bh(&port->lock);
122 fwtty_dbg(port, "short write: avail:%d req:%d wrote:%d\n",
123 avail, c, n);
126 #else
127 #define debug_short_write(port, c, n)
128 #endif
130 static struct fwtty_peer *__fwserial_peer_by_node_id(struct fw_card *card,
131 int generation, int id);
133 #ifdef FWTTY_PROFILING
135 static void fwtty_profile_fifo(struct fwtty_port *port, unsigned int *stat)
137 spin_lock_bh(&port->lock);
138 fwtty_profile_data(stat, dma_fifo_avail(&port->tx_fifo));
139 spin_unlock_bh(&port->lock);
142 static void fwtty_dump_profile(struct seq_file *m, struct stats *stats)
144 /* for each stat, print sum of 0 to 2^k, then individually */
145 int k = 4;
146 unsigned int sum;
147 int j;
148 char t[10];
150 snprintf(t, 10, "< %d", 1 << k);
151 seq_printf(m, "\n%14s %6s", " ", t);
152 for (j = k + 1; j < DISTRIBUTION_MAX_INDEX; ++j)
153 seq_printf(m, "%6d", 1 << j);
155 ++k;
156 for (j = 0, sum = 0; j <= k; ++j)
157 sum += stats->reads[j];
158 seq_printf(m, "\n%14s: %6d", "reads", sum);
159 for (j = k + 1; j <= DISTRIBUTION_MAX_INDEX; ++j)
160 seq_printf(m, "%6d", stats->reads[j]);
162 for (j = 0, sum = 0; j <= k; ++j)
163 sum += stats->writes[j];
164 seq_printf(m, "\n%14s: %6d", "writes", sum);
165 for (j = k + 1; j <= DISTRIBUTION_MAX_INDEX; ++j)
166 seq_printf(m, "%6d", stats->writes[j]);
168 for (j = 0, sum = 0; j <= k; ++j)
169 sum += stats->txns[j];
170 seq_printf(m, "\n%14s: %6d", "txns", sum);
171 for (j = k + 1; j <= DISTRIBUTION_MAX_INDEX; ++j)
172 seq_printf(m, "%6d", stats->txns[j]);
174 for (j = 0, sum = 0; j <= k; ++j)
175 sum += stats->unthrottle[j];
176 seq_printf(m, "\n%14s: %6d", "avail @ unthr", sum);
177 for (j = k + 1; j <= DISTRIBUTION_MAX_INDEX; ++j)
178 seq_printf(m, "%6d", stats->unthrottle[j]);
181 #else
182 #define fwtty_profile_fifo(port, stat)
183 #define fwtty_dump_profile(m, stats)
184 #endif
187 * Returns the max receive packet size for the given node
188 * Devices which are OHCI v1.0/ v1.1/ v1.2-draft or RFC 2734 compliant
189 * are required by specification to support max_rec of 8 (512 bytes) or more.
191 static inline int device_max_receive(struct fw_device *fw_device)
193 /* see IEEE 1394-2008 table 8-8 */
194 return min(2 << fw_device->max_rec, 4096);
197 static void fwtty_log_tx_error(struct fwtty_port *port, int rcode)
199 switch (rcode) {
200 case RCODE_SEND_ERROR:
201 fwtty_err_ratelimited(port, "card busy\n");
202 break;
203 case RCODE_ADDRESS_ERROR:
204 fwtty_err_ratelimited(port, "bad unit addr or write length\n");
205 break;
206 case RCODE_DATA_ERROR:
207 fwtty_err_ratelimited(port, "failed rx\n");
208 break;
209 case RCODE_NO_ACK:
210 fwtty_err_ratelimited(port, "missing ack\n");
211 break;
212 case RCODE_BUSY:
213 fwtty_err_ratelimited(port, "remote busy\n");
214 break;
215 default:
216 fwtty_err_ratelimited(port, "failed tx: %d\n", rcode);
220 static void fwtty_txn_constructor(void *this)
222 struct fwtty_transaction *txn = this;
224 init_timer(&txn->fw_txn.split_timeout_timer);
227 static void fwtty_common_callback(struct fw_card *card, int rcode,
228 void *payload, size_t len, void *cb_data)
230 struct fwtty_transaction *txn = cb_data;
231 struct fwtty_port *port = txn->port;
233 if (port && rcode != RCODE_COMPLETE)
234 fwtty_log_tx_error(port, rcode);
235 if (txn->callback)
236 txn->callback(card, rcode, payload, len, txn);
237 kmem_cache_free(fwtty_txn_cache, txn);
240 static int fwtty_send_data_async(struct fwtty_peer *peer, int tcode,
241 unsigned long long addr, void *payload,
242 size_t len, fwtty_transaction_cb callback,
243 struct fwtty_port *port)
245 struct fwtty_transaction *txn;
246 int generation;
248 txn = kmem_cache_alloc(fwtty_txn_cache, GFP_ATOMIC);
249 if (!txn)
250 return -ENOMEM;
252 txn->callback = callback;
253 txn->port = port;
255 generation = peer->generation;
256 smp_rmb();
257 fw_send_request(peer->serial->card, &txn->fw_txn, tcode,
258 peer->node_id, generation, peer->speed, addr, payload,
259 len, fwtty_common_callback, txn);
260 return 0;
263 static void fwtty_send_txn_async(struct fwtty_peer *peer,
264 struct fwtty_transaction *txn, int tcode,
265 unsigned long long addr, void *payload,
266 size_t len, fwtty_transaction_cb callback,
267 struct fwtty_port *port)
269 int generation;
271 txn->callback = callback;
272 txn->port = port;
274 generation = peer->generation;
275 smp_rmb();
276 fw_send_request(peer->serial->card, &txn->fw_txn, tcode,
277 peer->node_id, generation, peer->speed, addr, payload,
278 len, fwtty_common_callback, txn);
281 static void __fwtty_restart_tx(struct fwtty_port *port)
283 int len, avail;
285 len = dma_fifo_out_level(&port->tx_fifo);
286 if (len)
287 schedule_delayed_work(&port->drain, 0);
288 avail = dma_fifo_avail(&port->tx_fifo);
290 fwtty_dbg(port, "fifo len: %d avail: %d\n", len, avail);
293 static void fwtty_restart_tx(struct fwtty_port *port)
295 spin_lock_bh(&port->lock);
296 __fwtty_restart_tx(port);
297 spin_unlock_bh(&port->lock);
301 * fwtty_update_port_status - decodes & dispatches line status changes
303 * Note: in loopback, the port->lock is being held. Only use functions that
304 * don't attempt to reclaim the port->lock.
306 static void fwtty_update_port_status(struct fwtty_port *port,
307 unsigned int status)
309 unsigned int delta;
310 struct tty_struct *tty;
312 /* simulated LSR/MSR status from remote */
313 status &= ~MCTRL_MASK;
314 delta = (port->mstatus ^ status) & ~MCTRL_MASK;
315 delta &= ~(status & TIOCM_RNG);
316 port->mstatus = status;
318 if (delta & TIOCM_RNG)
319 ++port->icount.rng;
320 if (delta & TIOCM_DSR)
321 ++port->icount.dsr;
322 if (delta & TIOCM_CAR)
323 ++port->icount.dcd;
324 if (delta & TIOCM_CTS)
325 ++port->icount.cts;
327 fwtty_dbg(port, "status: %x delta: %x\n", status, delta);
329 if (delta & TIOCM_CAR) {
330 tty = tty_port_tty_get(&port->port);
331 if (tty && !C_CLOCAL(tty)) {
332 if (status & TIOCM_CAR)
333 wake_up_interruptible(&port->port.open_wait);
334 else
335 schedule_work(&port->hangup);
337 tty_kref_put(tty);
340 if (delta & TIOCM_CTS) {
341 tty = tty_port_tty_get(&port->port);
342 if (tty && C_CRTSCTS(tty)) {
343 if (tty->hw_stopped) {
344 if (status & TIOCM_CTS) {
345 tty->hw_stopped = 0;
346 if (port->loopback)
347 __fwtty_restart_tx(port);
348 else
349 fwtty_restart_tx(port);
351 } else {
352 if (~status & TIOCM_CTS)
353 tty->hw_stopped = 1;
356 tty_kref_put(tty);
358 } else if (delta & OOB_TX_THROTTLE) {
359 tty = tty_port_tty_get(&port->port);
360 if (tty) {
361 if (tty->hw_stopped) {
362 if (~status & OOB_TX_THROTTLE) {
363 tty->hw_stopped = 0;
364 if (port->loopback)
365 __fwtty_restart_tx(port);
366 else
367 fwtty_restart_tx(port);
369 } else {
370 if (status & OOB_TX_THROTTLE)
371 tty->hw_stopped = 1;
374 tty_kref_put(tty);
377 if (delta & (UART_LSR_BI << 24)) {
378 if (status & (UART_LSR_BI << 24)) {
379 port->break_last = jiffies;
380 schedule_delayed_work(&port->emit_breaks, 0);
381 } else {
382 /* run emit_breaks one last time (if pending) */
383 mod_delayed_work(system_wq, &port->emit_breaks, 0);
387 if (delta & (TIOCM_DSR | TIOCM_CAR | TIOCM_CTS | TIOCM_RNG))
388 wake_up_interruptible(&port->port.delta_msr_wait);
392 * __fwtty_port_line_status - generate 'line status' for indicated port
394 * This function returns a remote 'MSR' state based on the local 'MCR' state,
395 * as if a null modem cable was attached. The actual status is a mangling
396 * of TIOCM_* bits suitable for sending to a peer's status_addr.
398 * Note: caller must be holding port lock
400 static unsigned int __fwtty_port_line_status(struct fwtty_port *port)
402 unsigned int status = 0;
404 /* TODO: add module param to tie RNG to DTR as well */
406 if (port->mctrl & TIOCM_DTR)
407 status |= TIOCM_DSR | TIOCM_CAR;
408 if (port->mctrl & TIOCM_RTS)
409 status |= TIOCM_CTS;
410 if (port->mctrl & OOB_RX_THROTTLE)
411 status |= OOB_TX_THROTTLE;
412 /* emulate BRK as add'l line status */
413 if (port->break_ctl)
414 status |= UART_LSR_BI << 24;
416 return status;
420 * __fwtty_write_port_status - send the port line status to peer
422 * Note: caller must be holding the port lock.
424 static int __fwtty_write_port_status(struct fwtty_port *port)
426 struct fwtty_peer *peer;
427 int err = -ENOENT;
428 unsigned int status = __fwtty_port_line_status(port);
430 rcu_read_lock();
431 peer = rcu_dereference(port->peer);
432 if (peer) {
433 err = fwtty_send_data_async(peer, TCODE_WRITE_QUADLET_REQUEST,
434 peer->status_addr, &status,
435 sizeof(status), NULL, port);
437 rcu_read_unlock();
439 return err;
443 * fwtty_write_port_status - same as above but locked by port lock
445 static int fwtty_write_port_status(struct fwtty_port *port)
447 int err;
449 spin_lock_bh(&port->lock);
450 err = __fwtty_write_port_status(port);
451 spin_unlock_bh(&port->lock);
452 return err;
455 static void fwtty_throttle_port(struct fwtty_port *port)
457 struct tty_struct *tty;
458 unsigned int old;
460 tty = tty_port_tty_get(&port->port);
461 if (!tty)
462 return;
464 spin_lock_bh(&port->lock);
466 old = port->mctrl;
467 port->mctrl |= OOB_RX_THROTTLE;
468 if (C_CRTSCTS(tty))
469 port->mctrl &= ~TIOCM_RTS;
470 if (~old & OOB_RX_THROTTLE)
471 __fwtty_write_port_status(port);
473 spin_unlock_bh(&port->lock);
475 tty_kref_put(tty);
479 * fwtty_do_hangup - wait for ldisc to deliver all pending rx; only then hangup
481 * When the remote has finished tx, and all in-flight rx has been received and
482 * and pushed to the flip buffer, the remote may close its device. This will
483 * drop DTR on the remote which will drop carrier here. Typically, the tty is
484 * hung up when carrier is dropped or lost.
486 * However, there is a race between the hang up and the line discipline
487 * delivering its data to the reader. A hangup will cause the ldisc to flush
488 * (ie., clear) the read buffer and flip buffer. Because of firewire's
489 * relatively high throughput, the ldisc frequently lags well behind the driver,
490 * resulting in lost data (which has already been received and written to
491 * the flip buffer) when the remote closes its end.
493 * Unfortunately, since the flip buffer offers no direct method for determining
494 * if it holds data, ensuring the ldisc has delivered all data is problematic.
497 /* FIXME: drop this workaround when __tty_hangup waits for ldisc completion */
498 static void fwtty_do_hangup(struct work_struct *work)
500 struct fwtty_port *port = to_port(work, hangup);
501 struct tty_struct *tty;
503 schedule_timeout_uninterruptible(msecs_to_jiffies(50));
505 tty = tty_port_tty_get(&port->port);
506 if (tty)
507 tty_vhangup(tty);
508 tty_kref_put(tty);
511 static void fwtty_emit_breaks(struct work_struct *work)
513 struct fwtty_port *port = to_port(to_delayed_work(work), emit_breaks);
514 static const char buf[16];
515 unsigned long now = jiffies;
516 unsigned long elapsed = now - port->break_last;
517 int n, t, c, brk = 0;
519 /* generate breaks at the line rate (but at least 1) */
520 n = (elapsed * port->cps) / HZ + 1;
521 port->break_last = now;
523 fwtty_dbg(port, "sending %d brks\n", n);
525 while (n) {
526 t = min(n, 16);
527 c = tty_insert_flip_string_fixed_flag(&port->port, buf,
528 TTY_BREAK, t);
529 n -= c;
530 brk += c;
531 if (c < t)
532 break;
534 tty_flip_buffer_push(&port->port);
536 if (port->mstatus & (UART_LSR_BI << 24))
537 schedule_delayed_work(&port->emit_breaks, FREQ_BREAKS);
538 port->icount.brk += brk;
541 static int fwtty_rx(struct fwtty_port *port, unsigned char *data, size_t len)
543 int c, n = len;
544 unsigned int lsr;
545 int err = 0;
547 fwtty_dbg(port, "%d\n", n);
548 fwtty_profile_data(port->stats.reads, n);
550 if (port->write_only) {
551 n = 0;
552 goto out;
555 /* disregard break status; breaks are generated by emit_breaks work */
556 lsr = (port->mstatus >> 24) & ~UART_LSR_BI;
558 if (port->overrun)
559 lsr |= UART_LSR_OE;
561 if (lsr & UART_LSR_OE)
562 ++port->icount.overrun;
564 lsr &= port->status_mask;
565 if (lsr & ~port->ignore_mask & UART_LSR_OE) {
566 if (!tty_insert_flip_char(&port->port, 0, TTY_OVERRUN)) {
567 err = -EIO;
568 goto out;
571 port->overrun = false;
573 if (lsr & port->ignore_mask & ~UART_LSR_OE) {
574 /* TODO: don't drop SAK and Magic SysRq here */
575 n = 0;
576 goto out;
579 c = tty_insert_flip_string_fixed_flag(&port->port, data, TTY_NORMAL, n);
580 if (c > 0)
581 tty_flip_buffer_push(&port->port);
582 n -= c;
584 if (n) {
585 port->overrun = true;
586 err = -EIO;
587 fwtty_err_ratelimited(port, "flip buffer overrun\n");
589 } else {
590 /* throttle the sender if remaining flip buffer space has
591 * reached high watermark to avoid losing data which may be
592 * in-flight. Since the AR request context is 32k, that much
593 * data may have _already_ been acked.
595 if (tty_buffer_space_avail(&port->port) < HIGH_WATERMARK)
596 fwtty_throttle_port(port);
599 out:
600 port->icount.rx += len;
601 port->stats.lost += n;
602 return err;
606 * fwtty_port_handler - bus address handler for port reads/writes
607 * @parameters: fw_address_callback_t as specified by firewire core interface
609 * This handler is responsible for handling inbound read/write dma from remotes.
611 static void fwtty_port_handler(struct fw_card *card,
612 struct fw_request *request,
613 int tcode, int destination, int source,
614 int generation,
615 unsigned long long addr,
616 void *data, size_t len,
617 void *callback_data)
619 struct fwtty_port *port = callback_data;
620 struct fwtty_peer *peer;
621 int err;
622 int rcode;
624 /* Only accept rx from the peer virtual-cabled to this port */
625 rcu_read_lock();
626 peer = __fwserial_peer_by_node_id(card, generation, source);
627 rcu_read_unlock();
628 if (!peer || peer != rcu_access_pointer(port->peer)) {
629 rcode = RCODE_ADDRESS_ERROR;
630 fwtty_err_ratelimited(port, "ignoring unauthenticated data\n");
631 goto respond;
634 switch (tcode) {
635 case TCODE_WRITE_QUADLET_REQUEST:
636 if (addr != port->rx_handler.offset || len != 4) {
637 rcode = RCODE_ADDRESS_ERROR;
638 } else {
639 fwtty_update_port_status(port, *(unsigned int *)data);
640 rcode = RCODE_COMPLETE;
642 break;
644 case TCODE_WRITE_BLOCK_REQUEST:
645 if (addr != port->rx_handler.offset + 4 ||
646 len > port->rx_handler.length - 4) {
647 rcode = RCODE_ADDRESS_ERROR;
648 } else {
649 err = fwtty_rx(port, data, len);
650 switch (err) {
651 case 0:
652 rcode = RCODE_COMPLETE;
653 break;
654 case -EIO:
655 rcode = RCODE_DATA_ERROR;
656 break;
657 default:
658 rcode = RCODE_CONFLICT_ERROR;
659 break;
662 break;
664 default:
665 rcode = RCODE_TYPE_ERROR;
668 respond:
669 fw_send_response(card, request, rcode);
673 * fwtty_tx_complete - callback for tx dma
674 * @data: ignored, has no meaning for write txns
675 * @length: ignored, has no meaning for write txns
677 * The writer must be woken here if the fifo has been emptied because it
678 * may have slept if chars_in_buffer was != 0
680 static void fwtty_tx_complete(struct fw_card *card, int rcode,
681 void *data, size_t length,
682 struct fwtty_transaction *txn)
684 struct fwtty_port *port = txn->port;
685 int len;
687 fwtty_dbg(port, "rcode: %d\n", rcode);
689 switch (rcode) {
690 case RCODE_COMPLETE:
691 spin_lock_bh(&port->lock);
692 dma_fifo_out_complete(&port->tx_fifo, &txn->dma_pended);
693 len = dma_fifo_level(&port->tx_fifo);
694 spin_unlock_bh(&port->lock);
696 port->icount.tx += txn->dma_pended.len;
697 break;
699 default:
700 /* TODO: implement retries */
701 spin_lock_bh(&port->lock);
702 dma_fifo_out_complete(&port->tx_fifo, &txn->dma_pended);
703 len = dma_fifo_level(&port->tx_fifo);
704 spin_unlock_bh(&port->lock);
706 port->stats.dropped += txn->dma_pended.len;
709 if (len < WAKEUP_CHARS)
710 tty_port_tty_wakeup(&port->port);
713 static int fwtty_tx(struct fwtty_port *port, bool drain)
715 struct fwtty_peer *peer;
716 struct fwtty_transaction *txn;
717 struct tty_struct *tty;
718 int n, len;
720 tty = tty_port_tty_get(&port->port);
721 if (!tty)
722 return -ENOENT;
724 rcu_read_lock();
725 peer = rcu_dereference(port->peer);
726 if (!peer) {
727 n = -EIO;
728 goto out;
731 if (test_and_set_bit(IN_TX, &port->flags)) {
732 n = -EALREADY;
733 goto out;
736 /* try to write as many dma transactions out as possible */
737 n = -EAGAIN;
738 while (!tty->stopped && !tty->hw_stopped &&
739 !test_bit(STOP_TX, &port->flags)) {
740 txn = kmem_cache_alloc(fwtty_txn_cache, GFP_ATOMIC);
741 if (!txn) {
742 n = -ENOMEM;
743 break;
746 spin_lock_bh(&port->lock);
747 n = dma_fifo_out_pend(&port->tx_fifo, &txn->dma_pended);
748 spin_unlock_bh(&port->lock);
750 fwtty_dbg(port, "out: %u rem: %d\n", txn->dma_pended.len, n);
752 if (n < 0) {
753 kmem_cache_free(fwtty_txn_cache, txn);
754 if (n == -EAGAIN) {
755 ++port->stats.tx_stall;
756 } else if (n == -ENODATA) {
757 fwtty_profile_data(port->stats.txns, 0);
758 } else {
759 ++port->stats.fifo_errs;
760 fwtty_err_ratelimited(port, "fifo err: %d\n",
763 break;
766 fwtty_profile_data(port->stats.txns, txn->dma_pended.len);
768 fwtty_send_txn_async(peer, txn, TCODE_WRITE_BLOCK_REQUEST,
769 peer->fifo_addr, txn->dma_pended.data,
770 txn->dma_pended.len, fwtty_tx_complete,
771 port);
772 ++port->stats.sent;
775 * Stop tx if the 'last view' of the fifo is empty or if
776 * this is the writer and there's not enough data to bother
778 if (n == 0 || (!drain && n < WRITER_MINIMUM))
779 break;
782 if (n >= 0 || n == -EAGAIN || n == -ENOMEM || n == -ENODATA) {
783 spin_lock_bh(&port->lock);
784 len = dma_fifo_out_level(&port->tx_fifo);
785 if (len) {
786 unsigned long delay = (n == -ENOMEM) ? HZ : 1;
788 schedule_delayed_work(&port->drain, delay);
790 len = dma_fifo_level(&port->tx_fifo);
791 spin_unlock_bh(&port->lock);
793 /* wakeup the writer */
794 if (drain && len < WAKEUP_CHARS)
795 tty_wakeup(tty);
798 clear_bit(IN_TX, &port->flags);
799 wake_up_interruptible(&port->wait_tx);
801 out:
802 rcu_read_unlock();
803 tty_kref_put(tty);
804 return n;
807 static void fwtty_drain_tx(struct work_struct *work)
809 struct fwtty_port *port = to_port(to_delayed_work(work), drain);
811 fwtty_tx(port, true);
814 static void fwtty_write_xchar(struct fwtty_port *port, char ch)
816 struct fwtty_peer *peer;
818 ++port->stats.xchars;
820 fwtty_dbg(port, "%02x\n", ch);
822 rcu_read_lock();
823 peer = rcu_dereference(port->peer);
824 if (peer) {
825 fwtty_send_data_async(peer, TCODE_WRITE_BLOCK_REQUEST,
826 peer->fifo_addr, &ch, sizeof(ch),
827 NULL, port);
829 rcu_read_unlock();
832 static struct fwtty_port *fwtty_port_get(unsigned int index)
834 struct fwtty_port *port;
836 if (index >= MAX_TOTAL_PORTS)
837 return NULL;
839 mutex_lock(&port_table_lock);
840 port = port_table[index];
841 if (port)
842 kref_get(&port->serial->kref);
843 mutex_unlock(&port_table_lock);
844 return port;
847 static int fwtty_ports_add(struct fw_serial *serial)
849 int err = -EBUSY;
850 int i, j;
852 if (port_table_corrupt)
853 return err;
855 mutex_lock(&port_table_lock);
856 for (i = 0; i + num_ports <= MAX_TOTAL_PORTS; i += num_ports) {
857 if (!port_table[i]) {
858 for (j = 0; j < num_ports; ++i, ++j) {
859 serial->ports[j]->index = i;
860 port_table[i] = serial->ports[j];
862 err = 0;
863 break;
866 mutex_unlock(&port_table_lock);
867 return err;
870 static void fwserial_destroy(struct kref *kref)
872 struct fw_serial *serial = to_serial(kref, kref);
873 struct fwtty_port **ports = serial->ports;
874 int j, i = ports[0]->index;
876 synchronize_rcu();
878 mutex_lock(&port_table_lock);
879 for (j = 0; j < num_ports; ++i, ++j) {
880 port_table_corrupt |= port_table[i] != ports[j];
881 WARN_ONCE(port_table_corrupt, "port_table[%d]: %p != ports[%d]: %p",
882 i, port_table[i], j, ports[j]);
884 port_table[i] = NULL;
886 mutex_unlock(&port_table_lock);
888 for (j = 0; j < num_ports; ++j) {
889 fw_core_remove_address_handler(&ports[j]->rx_handler);
890 tty_port_destroy(&ports[j]->port);
891 kfree(ports[j]);
893 kfree(serial);
896 static void fwtty_port_put(struct fwtty_port *port)
898 kref_put(&port->serial->kref, fwserial_destroy);
901 static void fwtty_port_dtr_rts(struct tty_port *tty_port, int on)
903 struct fwtty_port *port = to_port(tty_port, port);
905 fwtty_dbg(port, "on/off: %d\n", on);
907 spin_lock_bh(&port->lock);
908 /* Don't change carrier state if this is a console */
909 if (!port->port.console) {
910 if (on)
911 port->mctrl |= TIOCM_DTR | TIOCM_RTS;
912 else
913 port->mctrl &= ~(TIOCM_DTR | TIOCM_RTS);
916 __fwtty_write_port_status(port);
917 spin_unlock_bh(&port->lock);
921 * fwtty_port_carrier_raised: required tty_port operation
923 * This port operation is polled after a tty has been opened and is waiting for
924 * carrier detect -- see drivers/tty/tty_port:tty_port_block_til_ready().
926 static int fwtty_port_carrier_raised(struct tty_port *tty_port)
928 struct fwtty_port *port = to_port(tty_port, port);
929 int rc;
931 rc = (port->mstatus & TIOCM_CAR);
933 fwtty_dbg(port, "%d\n", rc);
935 return rc;
938 static unsigned int set_termios(struct fwtty_port *port, struct tty_struct *tty)
940 unsigned int baud, frame;
942 baud = tty_termios_baud_rate(&tty->termios);
943 tty_termios_encode_baud_rate(&tty->termios, baud, baud);
945 /* compute bit count of 2 frames */
946 frame = 12 + ((C_CSTOPB(tty)) ? 4 : 2) + ((C_PARENB(tty)) ? 2 : 0);
948 switch (C_CSIZE(tty)) {
949 case CS5:
950 frame -= (C_CSTOPB(tty)) ? 1 : 0;
951 break;
952 case CS6:
953 frame += 2;
954 break;
955 case CS7:
956 frame += 4;
957 break;
958 case CS8:
959 frame += 6;
960 break;
963 port->cps = (baud << 1) / frame;
965 port->status_mask = UART_LSR_OE;
966 if (_I_FLAG(tty, BRKINT | PARMRK))
967 port->status_mask |= UART_LSR_BI;
969 port->ignore_mask = 0;
970 if (I_IGNBRK(tty)) {
971 port->ignore_mask |= UART_LSR_BI;
972 if (I_IGNPAR(tty))
973 port->ignore_mask |= UART_LSR_OE;
976 port->write_only = !C_CREAD(tty);
978 /* turn off echo and newline xlat if loopback */
979 if (port->loopback) {
980 tty->termios.c_lflag &= ~(ECHO | ECHOE | ECHOK | ECHOKE |
981 ECHONL | ECHOPRT | ECHOCTL);
982 tty->termios.c_oflag &= ~ONLCR;
985 return baud;
988 static int fwtty_port_activate(struct tty_port *tty_port,
989 struct tty_struct *tty)
991 struct fwtty_port *port = to_port(tty_port, port);
992 unsigned int baud;
993 int err;
995 set_bit(TTY_IO_ERROR, &tty->flags);
997 err = dma_fifo_alloc(&port->tx_fifo, FWTTY_PORT_TXFIFO_LEN,
998 cache_line_size(),
999 port->max_payload,
1000 FWTTY_PORT_MAX_PEND_DMA,
1001 GFP_KERNEL);
1002 if (err)
1003 return err;
1005 spin_lock_bh(&port->lock);
1007 baud = set_termios(port, tty);
1009 /* if console, don't change carrier state */
1010 if (!port->port.console) {
1011 port->mctrl = 0;
1012 if (baud != 0)
1013 port->mctrl = TIOCM_DTR | TIOCM_RTS;
1016 if (C_CRTSCTS(tty) && ~port->mstatus & TIOCM_CTS)
1017 tty->hw_stopped = 1;
1019 __fwtty_write_port_status(port);
1020 spin_unlock_bh(&port->lock);
1022 clear_bit(TTY_IO_ERROR, &tty->flags);
1024 return 0;
1028 * fwtty_port_shutdown
1030 * Note: the tty port core ensures this is not the console and
1031 * manages TTY_IO_ERROR properly
1033 static void fwtty_port_shutdown(struct tty_port *tty_port)
1035 struct fwtty_port *port = to_port(tty_port, port);
1037 /* TODO: cancel outstanding transactions */
1039 cancel_delayed_work_sync(&port->emit_breaks);
1040 cancel_delayed_work_sync(&port->drain);
1042 spin_lock_bh(&port->lock);
1043 port->flags = 0;
1044 port->break_ctl = 0;
1045 port->overrun = 0;
1046 __fwtty_write_port_status(port);
1047 dma_fifo_free(&port->tx_fifo);
1048 spin_unlock_bh(&port->lock);
1051 static int fwtty_open(struct tty_struct *tty, struct file *fp)
1053 struct fwtty_port *port = tty->driver_data;
1055 return tty_port_open(&port->port, tty, fp);
1058 static void fwtty_close(struct tty_struct *tty, struct file *fp)
1060 struct fwtty_port *port = tty->driver_data;
1062 tty_port_close(&port->port, tty, fp);
1065 static void fwtty_hangup(struct tty_struct *tty)
1067 struct fwtty_port *port = tty->driver_data;
1069 tty_port_hangup(&port->port);
1072 static void fwtty_cleanup(struct tty_struct *tty)
1074 struct fwtty_port *port = tty->driver_data;
1076 tty->driver_data = NULL;
1077 fwtty_port_put(port);
1080 static int fwtty_install(struct tty_driver *driver, struct tty_struct *tty)
1082 struct fwtty_port *port = fwtty_port_get(tty->index);
1083 int err;
1085 err = tty_standard_install(driver, tty);
1086 if (!err)
1087 tty->driver_data = port;
1088 else
1089 fwtty_port_put(port);
1090 return err;
1093 static int fwloop_install(struct tty_driver *driver, struct tty_struct *tty)
1095 struct fwtty_port *port = fwtty_port_get(table_idx(tty->index));
1096 int err;
1098 err = tty_standard_install(driver, tty);
1099 if (!err)
1100 tty->driver_data = port;
1101 else
1102 fwtty_port_put(port);
1103 return err;
1106 static int fwtty_write(struct tty_struct *tty, const unsigned char *buf, int c)
1108 struct fwtty_port *port = tty->driver_data;
1109 int n, len;
1111 fwtty_dbg(port, "%d\n", c);
1112 fwtty_profile_data(port->stats.writes, c);
1114 spin_lock_bh(&port->lock);
1115 n = dma_fifo_in(&port->tx_fifo, buf, c);
1116 len = dma_fifo_out_level(&port->tx_fifo);
1117 if (len < DRAIN_THRESHOLD)
1118 schedule_delayed_work(&port->drain, 1);
1119 spin_unlock_bh(&port->lock);
1121 if (len >= DRAIN_THRESHOLD)
1122 fwtty_tx(port, false);
1124 debug_short_write(port, c, n);
1126 return (n < 0) ? 0 : n;
1129 static int fwtty_write_room(struct tty_struct *tty)
1131 struct fwtty_port *port = tty->driver_data;
1132 int n;
1134 spin_lock_bh(&port->lock);
1135 n = dma_fifo_avail(&port->tx_fifo);
1136 spin_unlock_bh(&port->lock);
1138 fwtty_dbg(port, "%d\n", n);
1140 return n;
1143 static int fwtty_chars_in_buffer(struct tty_struct *tty)
1145 struct fwtty_port *port = tty->driver_data;
1146 int n;
1148 spin_lock_bh(&port->lock);
1149 n = dma_fifo_level(&port->tx_fifo);
1150 spin_unlock_bh(&port->lock);
1152 fwtty_dbg(port, "%d\n", n);
1154 return n;
1157 static void fwtty_send_xchar(struct tty_struct *tty, char ch)
1159 struct fwtty_port *port = tty->driver_data;
1161 fwtty_dbg(port, "%02x\n", ch);
1163 fwtty_write_xchar(port, ch);
1166 static void fwtty_throttle(struct tty_struct *tty)
1168 struct fwtty_port *port = tty->driver_data;
1171 * Ignore throttling (but not unthrottling).
1172 * It only makes sense to throttle when data will no longer be
1173 * accepted by the tty flip buffer. For example, it is
1174 * possible for received data to overflow the tty buffer long
1175 * before the line discipline ever has a chance to throttle the driver.
1176 * Additionally, the driver may have already completed the I/O
1177 * but the tty buffer is still emptying, so the line discipline is
1178 * throttling and unthrottling nothing.
1181 ++port->stats.throttled;
1184 static void fwtty_unthrottle(struct tty_struct *tty)
1186 struct fwtty_port *port = tty->driver_data;
1188 fwtty_dbg(port, "CRTSCTS: %d\n", C_CRTSCTS(tty) != 0);
1190 fwtty_profile_fifo(port, port->stats.unthrottle);
1192 spin_lock_bh(&port->lock);
1193 port->mctrl &= ~OOB_RX_THROTTLE;
1194 if (C_CRTSCTS(tty))
1195 port->mctrl |= TIOCM_RTS;
1196 __fwtty_write_port_status(port);
1197 spin_unlock_bh(&port->lock);
1200 static int check_msr_delta(struct fwtty_port *port, unsigned long mask,
1201 struct async_icount *prev)
1203 struct async_icount now;
1204 int delta;
1206 now = port->icount;
1208 delta = ((mask & TIOCM_RNG && prev->rng != now.rng) ||
1209 (mask & TIOCM_DSR && prev->dsr != now.dsr) ||
1210 (mask & TIOCM_CAR && prev->dcd != now.dcd) ||
1211 (mask & TIOCM_CTS && prev->cts != now.cts));
1213 *prev = now;
1215 return delta;
1218 static int wait_msr_change(struct fwtty_port *port, unsigned long mask)
1220 struct async_icount prev;
1222 prev = port->icount;
1224 return wait_event_interruptible(port->port.delta_msr_wait,
1225 check_msr_delta(port, mask, &prev));
1228 static int get_serial_info(struct fwtty_port *port,
1229 struct serial_struct __user *info)
1231 struct serial_struct tmp;
1233 memset(&tmp, 0, sizeof(tmp));
1235 tmp.type = PORT_UNKNOWN;
1236 tmp.line = port->port.tty->index;
1237 tmp.flags = port->port.flags;
1238 tmp.xmit_fifo_size = FWTTY_PORT_TXFIFO_LEN;
1239 tmp.baud_base = 400000000;
1240 tmp.close_delay = port->port.close_delay;
1242 return (copy_to_user(info, &tmp, sizeof(*info))) ? -EFAULT : 0;
1245 static int set_serial_info(struct fwtty_port *port,
1246 struct serial_struct __user *info)
1248 struct serial_struct tmp;
1250 if (copy_from_user(&tmp, info, sizeof(tmp)))
1251 return -EFAULT;
1253 if (tmp.irq != 0 || tmp.port != 0 || tmp.custom_divisor != 0 ||
1254 tmp.baud_base != 400000000)
1255 return -EPERM;
1257 if (!capable(CAP_SYS_ADMIN)) {
1258 if (((tmp.flags & ~ASYNC_USR_MASK) !=
1259 (port->port.flags & ~ASYNC_USR_MASK)))
1260 return -EPERM;
1261 } else {
1262 port->port.close_delay = tmp.close_delay * HZ / 100;
1265 return 0;
1268 static int fwtty_ioctl(struct tty_struct *tty, unsigned int cmd,
1269 unsigned long arg)
1271 struct fwtty_port *port = tty->driver_data;
1272 int err;
1274 switch (cmd) {
1275 case TIOCGSERIAL:
1276 mutex_lock(&port->port.mutex);
1277 err = get_serial_info(port, (void __user *)arg);
1278 mutex_unlock(&port->port.mutex);
1279 break;
1281 case TIOCSSERIAL:
1282 mutex_lock(&port->port.mutex);
1283 err = set_serial_info(port, (void __user *)arg);
1284 mutex_unlock(&port->port.mutex);
1285 break;
1287 case TIOCMIWAIT:
1288 err = wait_msr_change(port, arg);
1289 break;
1291 default:
1292 err = -ENOIOCTLCMD;
1295 return err;
1298 static void fwtty_set_termios(struct tty_struct *tty, struct ktermios *old)
1300 struct fwtty_port *port = tty->driver_data;
1301 unsigned int baud;
1303 spin_lock_bh(&port->lock);
1304 baud = set_termios(port, tty);
1306 if ((baud == 0) && (old->c_cflag & CBAUD)) {
1307 port->mctrl &= ~(TIOCM_DTR | TIOCM_RTS);
1308 } else if ((baud != 0) && !(old->c_cflag & CBAUD)) {
1309 if (C_CRTSCTS(tty) || !tty_throttled(tty))
1310 port->mctrl |= TIOCM_DTR | TIOCM_RTS;
1311 else
1312 port->mctrl |= TIOCM_DTR;
1314 __fwtty_write_port_status(port);
1315 spin_unlock_bh(&port->lock);
1317 if (old->c_cflag & CRTSCTS) {
1318 if (!C_CRTSCTS(tty)) {
1319 tty->hw_stopped = 0;
1320 fwtty_restart_tx(port);
1322 } else if (C_CRTSCTS(tty) && ~port->mstatus & TIOCM_CTS) {
1323 tty->hw_stopped = 1;
1328 * fwtty_break_ctl - start/stop sending breaks
1330 * Signals the remote to start or stop generating simulated breaks.
1331 * First, stop dequeueing from the fifo and wait for writer/drain to leave tx
1332 * before signalling the break line status. This guarantees any pending rx will
1333 * be queued to the line discipline before break is simulated on the remote.
1334 * Conversely, turning off break_ctl requires signalling the line status change,
1335 * then enabling tx.
1337 static int fwtty_break_ctl(struct tty_struct *tty, int state)
1339 struct fwtty_port *port = tty->driver_data;
1340 long ret;
1342 fwtty_dbg(port, "%d\n", state);
1344 if (state == -1) {
1345 set_bit(STOP_TX, &port->flags);
1346 ret = wait_event_interruptible_timeout(port->wait_tx,
1347 !test_bit(IN_TX, &port->flags),
1348 10);
1349 if (ret == 0 || ret == -ERESTARTSYS) {
1350 clear_bit(STOP_TX, &port->flags);
1351 fwtty_restart_tx(port);
1352 return -EINTR;
1356 spin_lock_bh(&port->lock);
1357 port->break_ctl = (state == -1);
1358 __fwtty_write_port_status(port);
1359 spin_unlock_bh(&port->lock);
1361 if (state == 0) {
1362 spin_lock_bh(&port->lock);
1363 dma_fifo_reset(&port->tx_fifo);
1364 clear_bit(STOP_TX, &port->flags);
1365 spin_unlock_bh(&port->lock);
1367 return 0;
1370 static int fwtty_tiocmget(struct tty_struct *tty)
1372 struct fwtty_port *port = tty->driver_data;
1373 unsigned int tiocm;
1375 spin_lock_bh(&port->lock);
1376 tiocm = (port->mctrl & MCTRL_MASK) | (port->mstatus & ~MCTRL_MASK);
1377 spin_unlock_bh(&port->lock);
1379 fwtty_dbg(port, "%x\n", tiocm);
1381 return tiocm;
1384 static int fwtty_tiocmset(struct tty_struct *tty,
1385 unsigned int set, unsigned int clear)
1387 struct fwtty_port *port = tty->driver_data;
1389 fwtty_dbg(port, "set: %x clear: %x\n", set, clear);
1391 /* TODO: simulate loopback if TIOCM_LOOP set */
1393 spin_lock_bh(&port->lock);
1394 port->mctrl &= ~(clear & MCTRL_MASK & 0xffff);
1395 port->mctrl |= set & MCTRL_MASK & 0xffff;
1396 __fwtty_write_port_status(port);
1397 spin_unlock_bh(&port->lock);
1398 return 0;
1401 static int fwtty_get_icount(struct tty_struct *tty,
1402 struct serial_icounter_struct *icount)
1404 struct fwtty_port *port = tty->driver_data;
1405 struct stats stats;
1407 memcpy(&stats, &port->stats, sizeof(stats));
1408 if (port->port.console)
1409 (*port->fwcon_ops->stats)(&stats, port->con_data);
1411 icount->cts = port->icount.cts;
1412 icount->dsr = port->icount.dsr;
1413 icount->rng = port->icount.rng;
1414 icount->dcd = port->icount.dcd;
1415 icount->rx = port->icount.rx;
1416 icount->tx = port->icount.tx + stats.xchars;
1417 icount->frame = port->icount.frame;
1418 icount->overrun = port->icount.overrun;
1419 icount->parity = port->icount.parity;
1420 icount->brk = port->icount.brk;
1421 icount->buf_overrun = port->icount.overrun;
1422 return 0;
1425 static void fwtty_proc_show_port(struct seq_file *m, struct fwtty_port *port)
1427 struct stats stats;
1429 memcpy(&stats, &port->stats, sizeof(stats));
1430 if (port->port.console)
1431 (*port->fwcon_ops->stats)(&stats, port->con_data);
1433 seq_printf(m, " addr:%012llx tx:%d rx:%d", port->rx_handler.offset,
1434 port->icount.tx + stats.xchars, port->icount.rx);
1435 seq_printf(m, " cts:%d dsr:%d rng:%d dcd:%d", port->icount.cts,
1436 port->icount.dsr, port->icount.rng, port->icount.dcd);
1437 seq_printf(m, " fe:%d oe:%d pe:%d brk:%d", port->icount.frame,
1438 port->icount.overrun, port->icount.parity, port->icount.brk);
1441 static void fwtty_debugfs_show_port(struct seq_file *m, struct fwtty_port *port)
1443 struct stats stats;
1445 memcpy(&stats, &port->stats, sizeof(stats));
1446 if (port->port.console)
1447 (*port->fwcon_ops->stats)(&stats, port->con_data);
1449 seq_printf(m, " dr:%d st:%d err:%d lost:%d", stats.dropped,
1450 stats.tx_stall, stats.fifo_errs, stats.lost);
1451 seq_printf(m, " pkts:%d thr:%d", stats.sent, stats.throttled);
1453 if (port->port.console) {
1454 seq_puts(m, "\n ");
1455 (*port->fwcon_ops->proc_show)(m, port->con_data);
1458 fwtty_dump_profile(m, &port->stats);
1461 static void fwtty_debugfs_show_peer(struct seq_file *m, struct fwtty_peer *peer)
1463 int generation = peer->generation;
1465 smp_rmb();
1466 seq_printf(m, " %s:", dev_name(&peer->unit->device));
1467 seq_printf(m, " node:%04x gen:%d", peer->node_id, generation);
1468 seq_printf(m, " sp:%d max:%d guid:%016llx", peer->speed,
1469 peer->max_payload, (unsigned long long)peer->guid);
1470 seq_printf(m, " mgmt:%012llx", (unsigned long long)peer->mgmt_addr);
1471 seq_printf(m, " addr:%012llx", (unsigned long long)peer->status_addr);
1472 seq_putc(m, '\n');
1475 static int fwtty_proc_show(struct seq_file *m, void *v)
1477 struct fwtty_port *port;
1478 int i;
1480 seq_puts(m, "fwserinfo: 1.0 driver: 1.0\n");
1481 for (i = 0; i < MAX_TOTAL_PORTS && (port = fwtty_port_get(i)); ++i) {
1482 seq_printf(m, "%2d:", i);
1483 if (capable(CAP_SYS_ADMIN))
1484 fwtty_proc_show_port(m, port);
1485 fwtty_port_put(port);
1486 seq_puts(m, "\n");
1488 return 0;
1491 static int fwtty_debugfs_stats_show(struct seq_file *m, void *v)
1493 struct fw_serial *serial = m->private;
1494 struct fwtty_port *port;
1495 int i;
1497 for (i = 0; i < num_ports; ++i) {
1498 port = fwtty_port_get(serial->ports[i]->index);
1499 if (port) {
1500 seq_printf(m, "%2d:", port->index);
1501 fwtty_proc_show_port(m, port);
1502 fwtty_debugfs_show_port(m, port);
1503 fwtty_port_put(port);
1504 seq_puts(m, "\n");
1507 return 0;
1510 static int fwtty_debugfs_peers_show(struct seq_file *m, void *v)
1512 struct fw_serial *serial = m->private;
1513 struct fwtty_peer *peer;
1515 rcu_read_lock();
1516 seq_printf(m, "card: %s guid: %016llx\n",
1517 dev_name(serial->card->device),
1518 (unsigned long long)serial->card->guid);
1519 list_for_each_entry_rcu(peer, &serial->peer_list, list)
1520 fwtty_debugfs_show_peer(m, peer);
1521 rcu_read_unlock();
1522 return 0;
1525 static int fwtty_proc_open(struct inode *inode, struct file *fp)
1527 return single_open(fp, fwtty_proc_show, NULL);
1530 static int fwtty_stats_open(struct inode *inode, struct file *fp)
1532 return single_open(fp, fwtty_debugfs_stats_show, inode->i_private);
1535 static int fwtty_peers_open(struct inode *inode, struct file *fp)
1537 return single_open(fp, fwtty_debugfs_peers_show, inode->i_private);
1540 static const struct file_operations fwtty_stats_fops = {
1541 .owner = THIS_MODULE,
1542 .open = fwtty_stats_open,
1543 .read = seq_read,
1544 .llseek = seq_lseek,
1545 .release = single_release,
1548 static const struct file_operations fwtty_peers_fops = {
1549 .owner = THIS_MODULE,
1550 .open = fwtty_peers_open,
1551 .read = seq_read,
1552 .llseek = seq_lseek,
1553 .release = single_release,
1556 static const struct file_operations fwtty_proc_fops = {
1557 .owner = THIS_MODULE,
1558 .open = fwtty_proc_open,
1559 .read = seq_read,
1560 .llseek = seq_lseek,
1561 .release = single_release,
1564 static const struct tty_port_operations fwtty_port_ops = {
1565 .dtr_rts = fwtty_port_dtr_rts,
1566 .carrier_raised = fwtty_port_carrier_raised,
1567 .shutdown = fwtty_port_shutdown,
1568 .activate = fwtty_port_activate,
1571 static const struct tty_operations fwtty_ops = {
1572 .open = fwtty_open,
1573 .close = fwtty_close,
1574 .hangup = fwtty_hangup,
1575 .cleanup = fwtty_cleanup,
1576 .install = fwtty_install,
1577 .write = fwtty_write,
1578 .write_room = fwtty_write_room,
1579 .chars_in_buffer = fwtty_chars_in_buffer,
1580 .send_xchar = fwtty_send_xchar,
1581 .throttle = fwtty_throttle,
1582 .unthrottle = fwtty_unthrottle,
1583 .ioctl = fwtty_ioctl,
1584 .set_termios = fwtty_set_termios,
1585 .break_ctl = fwtty_break_ctl,
1586 .tiocmget = fwtty_tiocmget,
1587 .tiocmset = fwtty_tiocmset,
1588 .get_icount = fwtty_get_icount,
1589 .proc_fops = &fwtty_proc_fops,
1592 static const struct tty_operations fwloop_ops = {
1593 .open = fwtty_open,
1594 .close = fwtty_close,
1595 .hangup = fwtty_hangup,
1596 .cleanup = fwtty_cleanup,
1597 .install = fwloop_install,
1598 .write = fwtty_write,
1599 .write_room = fwtty_write_room,
1600 .chars_in_buffer = fwtty_chars_in_buffer,
1601 .send_xchar = fwtty_send_xchar,
1602 .throttle = fwtty_throttle,
1603 .unthrottle = fwtty_unthrottle,
1604 .ioctl = fwtty_ioctl,
1605 .set_termios = fwtty_set_termios,
1606 .break_ctl = fwtty_break_ctl,
1607 .tiocmget = fwtty_tiocmget,
1608 .tiocmset = fwtty_tiocmset,
1609 .get_icount = fwtty_get_icount,
1612 static inline int mgmt_pkt_expected_len(__be16 code)
1614 static const struct fwserial_mgmt_pkt pkt;
1616 switch (be16_to_cpu(code)) {
1617 case FWSC_VIRT_CABLE_PLUG:
1618 return sizeof(pkt.hdr) + sizeof(pkt.plug_req);
1620 case FWSC_VIRT_CABLE_PLUG_RSP: /* | FWSC_RSP_OK */
1621 return sizeof(pkt.hdr) + sizeof(pkt.plug_rsp);
1623 case FWSC_VIRT_CABLE_UNPLUG:
1624 case FWSC_VIRT_CABLE_UNPLUG_RSP:
1625 case FWSC_VIRT_CABLE_PLUG_RSP | FWSC_RSP_NACK:
1626 case FWSC_VIRT_CABLE_UNPLUG_RSP | FWSC_RSP_NACK:
1627 return sizeof(pkt.hdr);
1629 default:
1630 return -1;
1634 static inline void fill_plug_params(struct virt_plug_params *params,
1635 struct fwtty_port *port)
1637 u64 status_addr = port->rx_handler.offset;
1638 u64 fifo_addr = port->rx_handler.offset + 4;
1639 size_t fifo_len = port->rx_handler.length - 4;
1641 params->status_hi = cpu_to_be32(status_addr >> 32);
1642 params->status_lo = cpu_to_be32(status_addr);
1643 params->fifo_hi = cpu_to_be32(fifo_addr >> 32);
1644 params->fifo_lo = cpu_to_be32(fifo_addr);
1645 params->fifo_len = cpu_to_be32(fifo_len);
1648 static inline void fill_plug_req(struct fwserial_mgmt_pkt *pkt,
1649 struct fwtty_port *port)
1651 pkt->hdr.code = cpu_to_be16(FWSC_VIRT_CABLE_PLUG);
1652 pkt->hdr.len = cpu_to_be16(mgmt_pkt_expected_len(pkt->hdr.code));
1653 fill_plug_params(&pkt->plug_req, port);
1656 static inline void fill_plug_rsp_ok(struct fwserial_mgmt_pkt *pkt,
1657 struct fwtty_port *port)
1659 pkt->hdr.code = cpu_to_be16(FWSC_VIRT_CABLE_PLUG_RSP);
1660 pkt->hdr.len = cpu_to_be16(mgmt_pkt_expected_len(pkt->hdr.code));
1661 fill_plug_params(&pkt->plug_rsp, port);
1664 static inline void fill_plug_rsp_nack(struct fwserial_mgmt_pkt *pkt)
1666 pkt->hdr.code = cpu_to_be16(FWSC_VIRT_CABLE_PLUG_RSP | FWSC_RSP_NACK);
1667 pkt->hdr.len = cpu_to_be16(mgmt_pkt_expected_len(pkt->hdr.code));
1670 static inline void fill_unplug_rsp_nack(struct fwserial_mgmt_pkt *pkt)
1672 pkt->hdr.code = cpu_to_be16(FWSC_VIRT_CABLE_UNPLUG_RSP | FWSC_RSP_NACK);
1673 pkt->hdr.len = cpu_to_be16(mgmt_pkt_expected_len(pkt->hdr.code));
1676 static inline void fill_unplug_rsp_ok(struct fwserial_mgmt_pkt *pkt)
1678 pkt->hdr.code = cpu_to_be16(FWSC_VIRT_CABLE_UNPLUG_RSP);
1679 pkt->hdr.len = cpu_to_be16(mgmt_pkt_expected_len(pkt->hdr.code));
1682 static void fwserial_virt_plug_complete(struct fwtty_peer *peer,
1683 struct virt_plug_params *params)
1685 struct fwtty_port *port = peer->port;
1687 peer->status_addr = be32_to_u64(params->status_hi, params->status_lo);
1688 peer->fifo_addr = be32_to_u64(params->fifo_hi, params->fifo_lo);
1689 peer->fifo_len = be32_to_cpu(params->fifo_len);
1690 peer_set_state(peer, FWPS_ATTACHED);
1692 /* reconfigure tx_fifo optimally for this peer */
1693 spin_lock_bh(&port->lock);
1694 port->max_payload = min(peer->max_payload, peer->fifo_len);
1695 dma_fifo_change_tx_limit(&port->tx_fifo, port->max_payload);
1696 spin_unlock_bh(&peer->port->lock);
1698 if (port->port.console && port->fwcon_ops->notify)
1699 (*port->fwcon_ops->notify)(FWCON_NOTIFY_ATTACH, port->con_data);
1701 fwtty_info(&peer->unit, "peer (guid:%016llx) connected on %s\n",
1702 (unsigned long long)peer->guid, dev_name(port->device));
1705 static inline int fwserial_send_mgmt_sync(struct fwtty_peer *peer,
1706 struct fwserial_mgmt_pkt *pkt)
1708 int generation;
1709 int rcode, tries = 5;
1711 do {
1712 generation = peer->generation;
1713 smp_rmb();
1715 rcode = fw_run_transaction(peer->serial->card,
1716 TCODE_WRITE_BLOCK_REQUEST,
1717 peer->node_id,
1718 generation, peer->speed,
1719 peer->mgmt_addr,
1720 pkt, be16_to_cpu(pkt->hdr.len));
1721 if (rcode == RCODE_BUSY || rcode == RCODE_SEND_ERROR ||
1722 rcode == RCODE_GENERATION) {
1723 fwtty_dbg(&peer->unit, "mgmt write error: %d\n", rcode);
1724 continue;
1725 } else {
1726 break;
1728 } while (--tries > 0);
1729 return rcode;
1733 * fwserial_claim_port - attempt to claim port @ index for peer
1735 * Returns ptr to claimed port or error code (as ERR_PTR())
1736 * Can sleep - must be called from process context
1738 static struct fwtty_port *fwserial_claim_port(struct fwtty_peer *peer,
1739 int index)
1741 struct fwtty_port *port;
1743 if (index < 0 || index >= num_ports)
1744 return ERR_PTR(-EINVAL);
1746 /* must guarantee that previous port releases have completed */
1747 synchronize_rcu();
1749 port = peer->serial->ports[index];
1750 spin_lock_bh(&port->lock);
1751 if (!rcu_access_pointer(port->peer))
1752 rcu_assign_pointer(port->peer, peer);
1753 else
1754 port = ERR_PTR(-EBUSY);
1755 spin_unlock_bh(&port->lock);
1757 return port;
1761 * fwserial_find_port - find avail port and claim for peer
1763 * Returns ptr to claimed port or NULL if none avail
1764 * Can sleep - must be called from process context
1766 static struct fwtty_port *fwserial_find_port(struct fwtty_peer *peer)
1768 struct fwtty_port **ports = peer->serial->ports;
1769 int i;
1771 /* must guarantee that previous port releases have completed */
1772 synchronize_rcu();
1774 /* TODO: implement optional GUID-to-specific port # matching */
1776 /* find an unattached port (but not the loopback port, if present) */
1777 for (i = 0; i < num_ttys; ++i) {
1778 spin_lock_bh(&ports[i]->lock);
1779 if (!ports[i]->peer) {
1780 /* claim port */
1781 rcu_assign_pointer(ports[i]->peer, peer);
1782 spin_unlock_bh(&ports[i]->lock);
1783 return ports[i];
1785 spin_unlock_bh(&ports[i]->lock);
1787 return NULL;
1790 static void fwserial_release_port(struct fwtty_port *port, bool reset)
1792 /* drop carrier (and all other line status) */
1793 if (reset)
1794 fwtty_update_port_status(port, 0);
1796 spin_lock_bh(&port->lock);
1798 /* reset dma fifo max transmission size back to S100 */
1799 port->max_payload = link_speed_to_max_payload(SCODE_100);
1800 dma_fifo_change_tx_limit(&port->tx_fifo, port->max_payload);
1802 RCU_INIT_POINTER(port->peer, NULL);
1803 spin_unlock_bh(&port->lock);
1805 if (port->port.console && port->fwcon_ops->notify)
1806 (*port->fwcon_ops->notify)(FWCON_NOTIFY_DETACH, port->con_data);
1809 static void fwserial_plug_timeout(unsigned long data)
1811 struct fwtty_peer *peer = (struct fwtty_peer *)data;
1812 struct fwtty_port *port;
1814 spin_lock_bh(&peer->lock);
1815 if (peer->state != FWPS_PLUG_PENDING) {
1816 spin_unlock_bh(&peer->lock);
1817 return;
1820 port = peer_revert_state(peer);
1821 spin_unlock_bh(&peer->lock);
1823 if (port)
1824 fwserial_release_port(port, false);
1828 * fwserial_connect_peer - initiate virtual cable with peer
1830 * Returns 0 if VIRT_CABLE_PLUG request was successfully sent,
1831 * otherwise error code. Must be called from process context.
1833 static int fwserial_connect_peer(struct fwtty_peer *peer)
1835 struct fwtty_port *port;
1836 struct fwserial_mgmt_pkt *pkt;
1837 int err, rcode;
1839 pkt = kmalloc(sizeof(*pkt), GFP_KERNEL);
1840 if (!pkt)
1841 return -ENOMEM;
1843 port = fwserial_find_port(peer);
1844 if (!port) {
1845 fwtty_err(&peer->unit, "avail ports in use\n");
1846 err = -EBUSY;
1847 goto free_pkt;
1850 spin_lock_bh(&peer->lock);
1852 /* only initiate VIRT_CABLE_PLUG if peer is currently not attached */
1853 if (peer->state != FWPS_NOT_ATTACHED) {
1854 err = -EBUSY;
1855 goto release_port;
1858 peer->port = port;
1859 peer_set_state(peer, FWPS_PLUG_PENDING);
1861 fill_plug_req(pkt, peer->port);
1863 setup_timer(&peer->timer, fwserial_plug_timeout, (unsigned long)peer);
1864 mod_timer(&peer->timer, jiffies + VIRT_CABLE_PLUG_TIMEOUT);
1865 spin_unlock_bh(&peer->lock);
1867 rcode = fwserial_send_mgmt_sync(peer, pkt);
1869 spin_lock_bh(&peer->lock);
1870 if (peer->state == FWPS_PLUG_PENDING && rcode != RCODE_COMPLETE) {
1871 if (rcode == RCODE_CONFLICT_ERROR)
1872 err = -EAGAIN;
1873 else
1874 err = -EIO;
1875 goto cancel_timer;
1877 spin_unlock_bh(&peer->lock);
1879 kfree(pkt);
1880 return 0;
1882 cancel_timer:
1883 del_timer(&peer->timer);
1884 peer_revert_state(peer);
1885 release_port:
1886 spin_unlock_bh(&peer->lock);
1887 fwserial_release_port(port, false);
1888 free_pkt:
1889 kfree(pkt);
1890 return err;
1894 * fwserial_close_port -
1895 * HUP the tty (if the tty exists) and unregister the tty device.
1896 * Only used by the unit driver upon unit removal to disconnect and
1897 * cleanup all attached ports
1899 * The port reference is put by fwtty_cleanup (if a reference was
1900 * ever taken).
1902 static void fwserial_close_port(struct tty_driver *driver,
1903 struct fwtty_port *port)
1905 struct tty_struct *tty;
1907 mutex_lock(&port->port.mutex);
1908 tty = tty_port_tty_get(&port->port);
1909 if (tty) {
1910 tty_vhangup(tty);
1911 tty_kref_put(tty);
1913 mutex_unlock(&port->port.mutex);
1915 if (driver == fwloop_driver)
1916 tty_unregister_device(driver, loop_idx(port));
1917 else
1918 tty_unregister_device(driver, port->index);
1922 * fwserial_lookup - finds first fw_serial associated with card
1923 * @card: fw_card to match
1925 * NB: caller must be holding fwserial_list_mutex
1927 static struct fw_serial *fwserial_lookup(struct fw_card *card)
1929 struct fw_serial *serial;
1931 list_for_each_entry(serial, &fwserial_list, list) {
1932 if (card == serial->card)
1933 return serial;
1936 return NULL;
1940 * __fwserial_lookup_rcu - finds first fw_serial associated with card
1941 * @card: fw_card to match
1943 * NB: caller must be inside rcu_read_lock() section
1945 static struct fw_serial *__fwserial_lookup_rcu(struct fw_card *card)
1947 struct fw_serial *serial;
1949 list_for_each_entry_rcu(serial, &fwserial_list, list) {
1950 if (card == serial->card)
1951 return serial;
1954 return NULL;
1958 * __fwserial_peer_by_node_id - finds a peer matching the given generation + id
1960 * If a matching peer could not be found for the specified generation/node id,
1961 * this could be because:
1962 * a) the generation has changed and one of the nodes hasn't updated yet
1963 * b) the remote node has created its remote unit device before this
1964 * local node has created its corresponding remote unit device
1965 * In either case, the remote node should retry
1967 * Note: caller must be in rcu_read_lock() section
1969 static struct fwtty_peer *__fwserial_peer_by_node_id(struct fw_card *card,
1970 int generation, int id)
1972 struct fw_serial *serial;
1973 struct fwtty_peer *peer;
1975 serial = __fwserial_lookup_rcu(card);
1976 if (!serial) {
1978 * Something is very wrong - there should be a matching
1979 * fw_serial structure for every fw_card. Maybe the remote node
1980 * has created its remote unit device before this driver has
1981 * been probed for any unit devices...
1983 fwtty_err(card, "unknown card (guid %016llx)\n",
1984 (unsigned long long)card->guid);
1985 return NULL;
1988 list_for_each_entry_rcu(peer, &serial->peer_list, list) {
1989 int g = peer->generation;
1991 smp_rmb();
1992 if (generation == g && id == peer->node_id)
1993 return peer;
1996 return NULL;
1999 #ifdef DEBUG
2000 static void __dump_peer_list(struct fw_card *card)
2002 struct fw_serial *serial;
2003 struct fwtty_peer *peer;
2005 serial = __fwserial_lookup_rcu(card);
2006 if (!serial)
2007 return;
2009 list_for_each_entry_rcu(peer, &serial->peer_list, list) {
2010 int g = peer->generation;
2012 smp_rmb();
2013 fwtty_dbg(card, "peer(%d:%x) guid: %016llx\n",
2014 g, peer->node_id, (unsigned long long)peer->guid);
2017 #else
2018 #define __dump_peer_list(s)
2019 #endif
2021 static void fwserial_auto_connect(struct work_struct *work)
2023 struct fwtty_peer *peer = to_peer(to_delayed_work(work), connect);
2024 int err;
2026 err = fwserial_connect_peer(peer);
2027 if (err == -EAGAIN && ++peer->connect_retries < MAX_CONNECT_RETRIES)
2028 schedule_delayed_work(&peer->connect, CONNECT_RETRY_DELAY);
2031 static void fwserial_peer_workfn(struct work_struct *work)
2033 struct fwtty_peer *peer = to_peer(work, work);
2035 peer->workfn(work);
2039 * fwserial_add_peer - add a newly probed 'serial' unit device as a 'peer'
2040 * @serial: aggregate representing the specific fw_card to add the peer to
2041 * @unit: 'peer' to create and add to peer_list of serial
2043 * Adds a 'peer' (ie, a local or remote 'serial' unit device) to the list of
2044 * peers for a specific fw_card. Optionally, auto-attach this peer to an
2045 * available tty port. This function is called either directly or indirectly
2046 * as a result of a 'serial' unit device being created & probed.
2048 * Note: this function is serialized with fwserial_remove_peer() by the
2049 * fwserial_list_mutex held in fwserial_probe().
2051 * A 1:1 correspondence between an fw_unit and an fwtty_peer is maintained
2052 * via the dev_set_drvdata() for the device of the fw_unit.
2054 static int fwserial_add_peer(struct fw_serial *serial, struct fw_unit *unit)
2056 struct device *dev = &unit->device;
2057 struct fw_device *parent = fw_parent_device(unit);
2058 struct fwtty_peer *peer;
2059 struct fw_csr_iterator ci;
2060 int key, val;
2061 int generation;
2063 peer = kzalloc(sizeof(*peer), GFP_KERNEL);
2064 if (!peer)
2065 return -ENOMEM;
2067 peer_set_state(peer, FWPS_NOT_ATTACHED);
2069 dev_set_drvdata(dev, peer);
2070 peer->unit = unit;
2071 peer->guid = (u64)parent->config_rom[3] << 32 | parent->config_rom[4];
2072 peer->speed = parent->max_speed;
2073 peer->max_payload = min(device_max_receive(parent),
2074 link_speed_to_max_payload(peer->speed));
2076 generation = parent->generation;
2077 smp_rmb();
2078 peer->node_id = parent->node_id;
2079 smp_wmb();
2080 peer->generation = generation;
2082 /* retrieve the mgmt bus addr from the unit directory */
2083 fw_csr_iterator_init(&ci, unit->directory);
2084 while (fw_csr_iterator_next(&ci, &key, &val)) {
2085 if (key == (CSR_OFFSET | CSR_DEPENDENT_INFO)) {
2086 peer->mgmt_addr = CSR_REGISTER_BASE + 4 * val;
2087 break;
2090 if (peer->mgmt_addr == 0ULL) {
2092 * No mgmt address effectively disables VIRT_CABLE_PLUG -
2093 * this peer will not be able to attach to a remote
2095 peer_set_state(peer, FWPS_NO_MGMT_ADDR);
2098 spin_lock_init(&peer->lock);
2099 peer->port = NULL;
2101 init_timer(&peer->timer);
2102 INIT_WORK(&peer->work, fwserial_peer_workfn);
2103 INIT_DELAYED_WORK(&peer->connect, fwserial_auto_connect);
2105 /* associate peer with specific fw_card */
2106 peer->serial = serial;
2107 list_add_rcu(&peer->list, &serial->peer_list);
2109 fwtty_info(&peer->unit, "peer added (guid:%016llx)\n",
2110 (unsigned long long)peer->guid);
2112 /* identify the local unit & virt cable to loopback port */
2113 if (parent->is_local) {
2114 serial->self = peer;
2115 if (create_loop_dev) {
2116 struct fwtty_port *port;
2118 port = fwserial_claim_port(peer, num_ttys);
2119 if (!IS_ERR(port)) {
2120 struct virt_plug_params params;
2122 spin_lock_bh(&peer->lock);
2123 peer->port = port;
2124 fill_plug_params(&params, port);
2125 fwserial_virt_plug_complete(peer, &params);
2126 spin_unlock_bh(&peer->lock);
2128 fwtty_write_port_status(port);
2132 } else if (auto_connect) {
2133 /* auto-attach to remote units only (if policy allows) */
2134 schedule_delayed_work(&peer->connect, 1);
2137 return 0;
2141 * fwserial_remove_peer - remove a 'serial' unit device as a 'peer'
2143 * Remove a 'peer' from its list of peers. This function is only
2144 * called by fwserial_remove() on bus removal of the unit device.
2146 * Note: this function is serialized with fwserial_add_peer() by the
2147 * fwserial_list_mutex held in fwserial_remove().
2149 static void fwserial_remove_peer(struct fwtty_peer *peer)
2151 struct fwtty_port *port;
2153 spin_lock_bh(&peer->lock);
2154 peer_set_state(peer, FWPS_GONE);
2155 spin_unlock_bh(&peer->lock);
2157 cancel_delayed_work_sync(&peer->connect);
2158 cancel_work_sync(&peer->work);
2160 spin_lock_bh(&peer->lock);
2161 /* if this unit is the local unit, clear link */
2162 if (peer == peer->serial->self)
2163 peer->serial->self = NULL;
2165 /* cancel the request timeout timer (if running) */
2166 del_timer(&peer->timer);
2168 port = peer->port;
2169 peer->port = NULL;
2171 list_del_rcu(&peer->list);
2173 fwtty_info(&peer->unit, "peer removed (guid:%016llx)\n",
2174 (unsigned long long)peer->guid);
2176 spin_unlock_bh(&peer->lock);
2178 if (port)
2179 fwserial_release_port(port, true);
2181 synchronize_rcu();
2182 kfree(peer);
2186 * fwserial_create - init everything to create TTYs for a specific fw_card
2187 * @unit: fw_unit for first 'serial' unit device probed for this fw_card
2189 * This function inits the aggregate structure (an fw_serial instance)
2190 * used to manage the TTY ports registered by a specific fw_card. Also, the
2191 * unit device is added as the first 'peer'.
2193 * This unit device may represent a local unit device (as specified by the
2194 * config ROM unit directory) or it may represent a remote unit device
2195 * (as specified by the reading of the remote node's config ROM).
2197 * Returns 0 to indicate "ownership" of the unit device, or a negative errno
2198 * value to indicate which error.
2200 static int fwserial_create(struct fw_unit *unit)
2202 struct fw_device *parent = fw_parent_device(unit);
2203 struct fw_card *card = parent->card;
2204 struct fw_serial *serial;
2205 struct fwtty_port *port;
2206 struct device *tty_dev;
2207 int i, j;
2208 int err;
2210 serial = kzalloc(sizeof(*serial), GFP_KERNEL);
2211 if (!serial)
2212 return -ENOMEM;
2214 kref_init(&serial->kref);
2215 serial->card = card;
2216 INIT_LIST_HEAD(&serial->peer_list);
2218 for (i = 0; i < num_ports; ++i) {
2219 port = kzalloc(sizeof(*port), GFP_KERNEL);
2220 if (!port) {
2221 err = -ENOMEM;
2222 goto free_ports;
2224 tty_port_init(&port->port);
2225 port->index = FWTTY_INVALID_INDEX;
2226 port->port.ops = &fwtty_port_ops;
2227 port->serial = serial;
2228 tty_buffer_set_limit(&port->port, 128 * 1024);
2230 spin_lock_init(&port->lock);
2231 INIT_DELAYED_WORK(&port->drain, fwtty_drain_tx);
2232 INIT_DELAYED_WORK(&port->emit_breaks, fwtty_emit_breaks);
2233 INIT_WORK(&port->hangup, fwtty_do_hangup);
2234 init_waitqueue_head(&port->wait_tx);
2235 port->max_payload = link_speed_to_max_payload(SCODE_100);
2236 dma_fifo_init(&port->tx_fifo);
2238 RCU_INIT_POINTER(port->peer, NULL);
2239 serial->ports[i] = port;
2241 /* get unique bus addr region for port's status & recv fifo */
2242 port->rx_handler.length = FWTTY_PORT_RXFIFO_LEN + 4;
2243 port->rx_handler.address_callback = fwtty_port_handler;
2244 port->rx_handler.callback_data = port;
2246 * XXX: use custom memory region above cpu physical memory addrs
2247 * this will ease porting to 64-bit firewire adapters
2249 err = fw_core_add_address_handler(&port->rx_handler,
2250 &fw_high_memory_region);
2251 if (err) {
2252 kfree(port);
2253 goto free_ports;
2256 /* preserve i for error cleanup */
2258 err = fwtty_ports_add(serial);
2259 if (err) {
2260 fwtty_err(&unit, "no space in port table\n");
2261 goto free_ports;
2264 for (j = 0; j < num_ttys; ++j) {
2265 tty_dev = tty_port_register_device(&serial->ports[j]->port,
2266 fwtty_driver,
2267 serial->ports[j]->index,
2268 card->device);
2269 if (IS_ERR(tty_dev)) {
2270 err = PTR_ERR(tty_dev);
2271 fwtty_err(&unit, "register tty device error (%d)\n",
2272 err);
2273 goto unregister_ttys;
2276 serial->ports[j]->device = tty_dev;
2278 /* preserve j for error cleanup */
2280 if (create_loop_dev) {
2281 struct device *loop_dev;
2283 loop_dev = tty_port_register_device(&serial->ports[j]->port,
2284 fwloop_driver,
2285 loop_idx(serial->ports[j]),
2286 card->device);
2287 if (IS_ERR(loop_dev)) {
2288 err = PTR_ERR(loop_dev);
2289 fwtty_err(&unit, "create loop device failed (%d)\n",
2290 err);
2291 goto unregister_ttys;
2293 serial->ports[j]->device = loop_dev;
2294 serial->ports[j]->loopback = true;
2297 if (!IS_ERR_OR_NULL(fwserial_debugfs)) {
2298 serial->debugfs = debugfs_create_dir(dev_name(&unit->device),
2299 fwserial_debugfs);
2300 if (!IS_ERR_OR_NULL(serial->debugfs)) {
2301 debugfs_create_file("peers", 0444, serial->debugfs,
2302 serial, &fwtty_peers_fops);
2303 debugfs_create_file("stats", 0444, serial->debugfs,
2304 serial, &fwtty_stats_fops);
2308 list_add_rcu(&serial->list, &fwserial_list);
2310 fwtty_notice(&unit, "TTY over FireWire on device %s (guid %016llx)\n",
2311 dev_name(card->device), (unsigned long long)card->guid);
2313 err = fwserial_add_peer(serial, unit);
2314 if (!err)
2315 return 0;
2317 fwtty_err(&unit, "unable to add peer unit device (%d)\n", err);
2319 /* fall-through to error processing */
2320 debugfs_remove_recursive(serial->debugfs);
2322 list_del_rcu(&serial->list);
2323 if (create_loop_dev)
2324 tty_unregister_device(fwloop_driver,
2325 loop_idx(serial->ports[j]));
2326 unregister_ttys:
2327 for (--j; j >= 0; --j)
2328 tty_unregister_device(fwtty_driver, serial->ports[j]->index);
2329 kref_put(&serial->kref, fwserial_destroy);
2330 return err;
2332 free_ports:
2333 for (--i; i >= 0; --i) {
2334 tty_port_destroy(&serial->ports[i]->port);
2335 kfree(serial->ports[i]);
2337 kfree(serial);
2338 return err;
2342 * fwserial_probe: bus probe function for firewire 'serial' unit devices
2344 * A 'serial' unit device is created and probed as a result of:
2345 * - declaring a ieee1394 bus id table for 'devices' matching a fabricated
2346 * 'serial' unit specifier id
2347 * - adding a unit directory to the config ROM(s) for a 'serial' unit
2349 * The firewire core registers unit devices by enumerating unit directories
2350 * of a node's config ROM after reading the config ROM when a new node is
2351 * added to the bus topology after a bus reset.
2353 * The practical implications of this are:
2354 * - this probe is called for both local and remote nodes that have a 'serial'
2355 * unit directory in their config ROM (that matches the specifiers in
2356 * fwserial_id_table).
2357 * - no specific order is enforced for local vs. remote unit devices
2359 * This unit driver copes with the lack of specific order in the same way the
2360 * firewire net driver does -- each probe, for either a local or remote unit
2361 * device, is treated as a 'peer' (has a struct fwtty_peer instance) and the
2362 * first peer created for a given fw_card (tracked by the global fwserial_list)
2363 * creates the underlying TTYs (aggregated in a fw_serial instance).
2365 * NB: an early attempt to differentiate local & remote unit devices by creating
2366 * peers only for remote units and fw_serial instances (with their
2367 * associated TTY devices) only for local units was discarded. Managing
2368 * the peer lifetimes on device removal proved too complicated.
2370 * fwserial_probe/fwserial_remove are effectively serialized by the
2371 * fwserial_list_mutex. This is necessary because the addition of the first peer
2372 * for a given fw_card will trigger the creation of the fw_serial for that
2373 * fw_card, which must not simultaneously contend with the removal of the
2374 * last peer for a given fw_card triggering the destruction of the same
2375 * fw_serial for the same fw_card.
2377 static int fwserial_probe(struct fw_unit *unit,
2378 const struct ieee1394_device_id *id)
2380 struct fw_serial *serial;
2381 int err;
2383 mutex_lock(&fwserial_list_mutex);
2384 serial = fwserial_lookup(fw_parent_device(unit)->card);
2385 if (!serial)
2386 err = fwserial_create(unit);
2387 else
2388 err = fwserial_add_peer(serial, unit);
2389 mutex_unlock(&fwserial_list_mutex);
2390 return err;
2394 * fwserial_remove: bus removal function for firewire 'serial' unit devices
2396 * The corresponding 'peer' for this unit device is removed from the list of
2397 * peers for the associated fw_serial (which has a 1:1 correspondence with a
2398 * specific fw_card). If this is the last peer being removed, then trigger
2399 * the destruction of the underlying TTYs.
2401 static void fwserial_remove(struct fw_unit *unit)
2403 struct fwtty_peer *peer = dev_get_drvdata(&unit->device);
2404 struct fw_serial *serial = peer->serial;
2405 int i;
2407 mutex_lock(&fwserial_list_mutex);
2408 fwserial_remove_peer(peer);
2410 if (list_empty(&serial->peer_list)) {
2411 /* unlink from the fwserial_list here */
2412 list_del_rcu(&serial->list);
2414 debugfs_remove_recursive(serial->debugfs);
2416 for (i = 0; i < num_ttys; ++i)
2417 fwserial_close_port(fwtty_driver, serial->ports[i]);
2418 if (create_loop_dev)
2419 fwserial_close_port(fwloop_driver, serial->ports[i]);
2420 kref_put(&serial->kref, fwserial_destroy);
2422 mutex_unlock(&fwserial_list_mutex);
2426 * fwserial_update: bus update function for 'firewire' serial unit devices
2428 * Updates the new node_id and bus generation for this peer. Note that locking
2429 * is unnecessary; but careful memory barrier usage is important to enforce the
2430 * load and store order of generation & node_id.
2432 * The fw-core orders the write of node_id before generation in the parent
2433 * fw_device to ensure that a stale node_id cannot be used with a current
2434 * bus generation. So the generation value must be read before the node_id.
2436 * In turn, this orders the write of node_id before generation in the peer to
2437 * also ensure a stale node_id cannot be used with a current bus generation.
2439 static void fwserial_update(struct fw_unit *unit)
2441 struct fw_device *parent = fw_parent_device(unit);
2442 struct fwtty_peer *peer = dev_get_drvdata(&unit->device);
2443 int generation;
2445 generation = parent->generation;
2446 smp_rmb();
2447 peer->node_id = parent->node_id;
2448 smp_wmb();
2449 peer->generation = generation;
2452 static const struct ieee1394_device_id fwserial_id_table[] = {
2454 .match_flags = IEEE1394_MATCH_SPECIFIER_ID |
2455 IEEE1394_MATCH_VERSION,
2456 .specifier_id = LINUX_VENDOR_ID,
2457 .version = FWSERIAL_VERSION,
2462 static struct fw_driver fwserial_driver = {
2463 .driver = {
2464 .owner = THIS_MODULE,
2465 .name = KBUILD_MODNAME,
2466 .bus = &fw_bus_type,
2468 .probe = fwserial_probe,
2469 .update = fwserial_update,
2470 .remove = fwserial_remove,
2471 .id_table = fwserial_id_table,
2474 #define FW_UNIT_SPECIFIER(id) ((CSR_SPECIFIER_ID << 24) | (id))
2475 #define FW_UNIT_VERSION(ver) ((CSR_VERSION << 24) | (ver))
2476 #define FW_UNIT_ADDRESS(ofs) (((CSR_OFFSET | CSR_DEPENDENT_INFO) << 24) \
2477 | (((ofs) - CSR_REGISTER_BASE) >> 2))
2478 /* XXX: config ROM definitons could be improved with semi-automated offset
2479 * and length calculation
2481 #define FW_ROM_LEN(quads) ((quads) << 16)
2482 #define FW_ROM_DESCRIPTOR(ofs) (((CSR_LEAF | CSR_DESCRIPTOR) << 24) | (ofs))
2484 struct fwserial_unit_directory_data {
2485 u32 len_crc;
2486 u32 unit_specifier;
2487 u32 unit_sw_version;
2488 u32 unit_addr_offset;
2489 u32 desc1_ofs;
2490 u32 desc1_len_crc;
2491 u32 desc1_data[5];
2492 } __packed;
2494 static struct fwserial_unit_directory_data fwserial_unit_directory_data = {
2495 .len_crc = FW_ROM_LEN(4),
2496 .unit_specifier = FW_UNIT_SPECIFIER(LINUX_VENDOR_ID),
2497 .unit_sw_version = FW_UNIT_VERSION(FWSERIAL_VERSION),
2498 .desc1_ofs = FW_ROM_DESCRIPTOR(1),
2499 .desc1_len_crc = FW_ROM_LEN(5),
2500 .desc1_data = {
2501 0x00000000, /* type = text */
2502 0x00000000, /* enc = ASCII, lang EN */
2503 0x4c696e75, /* 'Linux TTY' */
2504 0x78205454,
2505 0x59000000,
2509 static struct fw_descriptor fwserial_unit_directory = {
2510 .length = sizeof(fwserial_unit_directory_data) / sizeof(u32),
2511 .key = (CSR_DIRECTORY | CSR_UNIT) << 24,
2512 .data = (u32 *)&fwserial_unit_directory_data,
2516 * The management address is in the unit space region but above other known
2517 * address users (to keep wild writes from causing havoc)
2519 static const struct fw_address_region fwserial_mgmt_addr_region = {
2520 .start = CSR_REGISTER_BASE + 0x1e0000ULL,
2521 .end = 0x1000000000000ULL,
2524 static struct fw_address_handler fwserial_mgmt_addr_handler;
2527 * fwserial_handle_plug_req - handle VIRT_CABLE_PLUG request work
2528 * @work: ptr to peer->work
2530 * Attempts to complete the VIRT_CABLE_PLUG handshake sequence for this peer.
2532 * This checks for a collided request-- ie, that a VIRT_CABLE_PLUG request was
2533 * already sent to this peer. If so, the collision is resolved by comparing
2534 * guid values; the loser sends the plug response.
2536 * Note: if an error prevents a response, don't do anything -- the
2537 * remote will timeout its request.
2539 static void fwserial_handle_plug_req(struct work_struct *work)
2541 struct fwtty_peer *peer = to_peer(work, work);
2542 struct virt_plug_params *plug_req = &peer->work_params.plug_req;
2543 struct fwtty_port *port;
2544 struct fwserial_mgmt_pkt *pkt;
2545 int rcode;
2547 pkt = kmalloc(sizeof(*pkt), GFP_KERNEL);
2548 if (!pkt)
2549 return;
2551 port = fwserial_find_port(peer);
2553 spin_lock_bh(&peer->lock);
2555 switch (peer->state) {
2556 case FWPS_NOT_ATTACHED:
2557 if (!port) {
2558 fwtty_err(&peer->unit, "no more ports avail\n");
2559 fill_plug_rsp_nack(pkt);
2560 } else {
2561 peer->port = port;
2562 fill_plug_rsp_ok(pkt, peer->port);
2563 peer_set_state(peer, FWPS_PLUG_RESPONDING);
2564 /* don't release claimed port */
2565 port = NULL;
2567 break;
2569 case FWPS_PLUG_PENDING:
2570 if (peer->serial->card->guid > peer->guid)
2571 goto cleanup;
2573 /* We lost - hijack the already-claimed port and send ok */
2574 del_timer(&peer->timer);
2575 fill_plug_rsp_ok(pkt, peer->port);
2576 peer_set_state(peer, FWPS_PLUG_RESPONDING);
2577 break;
2579 default:
2580 fill_plug_rsp_nack(pkt);
2583 spin_unlock_bh(&peer->lock);
2584 if (port)
2585 fwserial_release_port(port, false);
2587 rcode = fwserial_send_mgmt_sync(peer, pkt);
2589 spin_lock_bh(&peer->lock);
2590 if (peer->state == FWPS_PLUG_RESPONDING) {
2591 if (rcode == RCODE_COMPLETE) {
2592 struct fwtty_port *tmp = peer->port;
2594 fwserial_virt_plug_complete(peer, plug_req);
2595 spin_unlock_bh(&peer->lock);
2597 fwtty_write_port_status(tmp);
2598 spin_lock_bh(&peer->lock);
2599 } else {
2600 fwtty_err(&peer->unit, "PLUG_RSP error (%d)\n", rcode);
2601 port = peer_revert_state(peer);
2604 cleanup:
2605 spin_unlock_bh(&peer->lock);
2606 if (port)
2607 fwserial_release_port(port, false);
2608 kfree(pkt);
2611 static void fwserial_handle_unplug_req(struct work_struct *work)
2613 struct fwtty_peer *peer = to_peer(work, work);
2614 struct fwtty_port *port = NULL;
2615 struct fwserial_mgmt_pkt *pkt;
2616 int rcode;
2618 pkt = kmalloc(sizeof(*pkt), GFP_KERNEL);
2619 if (!pkt)
2620 return;
2622 spin_lock_bh(&peer->lock);
2624 switch (peer->state) {
2625 case FWPS_ATTACHED:
2626 fill_unplug_rsp_ok(pkt);
2627 peer_set_state(peer, FWPS_UNPLUG_RESPONDING);
2628 break;
2630 case FWPS_UNPLUG_PENDING:
2631 if (peer->serial->card->guid > peer->guid)
2632 goto cleanup;
2634 /* We lost - send unplug rsp */
2635 del_timer(&peer->timer);
2636 fill_unplug_rsp_ok(pkt);
2637 peer_set_state(peer, FWPS_UNPLUG_RESPONDING);
2638 break;
2640 default:
2641 fill_unplug_rsp_nack(pkt);
2644 spin_unlock_bh(&peer->lock);
2646 rcode = fwserial_send_mgmt_sync(peer, pkt);
2648 spin_lock_bh(&peer->lock);
2649 if (peer->state == FWPS_UNPLUG_RESPONDING) {
2650 if (rcode != RCODE_COMPLETE)
2651 fwtty_err(&peer->unit, "UNPLUG_RSP error (%d)\n",
2652 rcode);
2653 port = peer_revert_state(peer);
2655 cleanup:
2656 spin_unlock_bh(&peer->lock);
2657 if (port)
2658 fwserial_release_port(port, true);
2659 kfree(pkt);
2662 static int fwserial_parse_mgmt_write(struct fwtty_peer *peer,
2663 struct fwserial_mgmt_pkt *pkt,
2664 unsigned long long addr,
2665 size_t len)
2667 struct fwtty_port *port = NULL;
2668 bool reset = false;
2669 int rcode;
2671 if (addr != fwserial_mgmt_addr_handler.offset || len < sizeof(pkt->hdr))
2672 return RCODE_ADDRESS_ERROR;
2674 if (len != be16_to_cpu(pkt->hdr.len) ||
2675 len != mgmt_pkt_expected_len(pkt->hdr.code))
2676 return RCODE_DATA_ERROR;
2678 spin_lock_bh(&peer->lock);
2679 if (peer->state == FWPS_GONE) {
2681 * This should never happen - it would mean that the
2682 * remote unit that just wrote this transaction was
2683 * already removed from the bus -- and the removal was
2684 * processed before we rec'd this transaction
2686 fwtty_err(&peer->unit, "peer already removed\n");
2687 spin_unlock_bh(&peer->lock);
2688 return RCODE_ADDRESS_ERROR;
2691 rcode = RCODE_COMPLETE;
2693 fwtty_dbg(&peer->unit, "mgmt: hdr.code: %04hx\n", pkt->hdr.code);
2695 switch (be16_to_cpu(pkt->hdr.code) & FWSC_CODE_MASK) {
2696 case FWSC_VIRT_CABLE_PLUG:
2697 if (work_pending(&peer->work)) {
2698 fwtty_err(&peer->unit, "plug req: busy\n");
2699 rcode = RCODE_CONFLICT_ERROR;
2701 } else {
2702 peer->work_params.plug_req = pkt->plug_req;
2703 peer->workfn = fwserial_handle_plug_req;
2704 queue_work(system_unbound_wq, &peer->work);
2706 break;
2708 case FWSC_VIRT_CABLE_PLUG_RSP:
2709 if (peer->state != FWPS_PLUG_PENDING) {
2710 rcode = RCODE_CONFLICT_ERROR;
2712 } else if (be16_to_cpu(pkt->hdr.code) & FWSC_RSP_NACK) {
2713 fwtty_notice(&peer->unit, "NACK plug rsp\n");
2714 port = peer_revert_state(peer);
2716 } else {
2717 struct fwtty_port *tmp = peer->port;
2719 fwserial_virt_plug_complete(peer, &pkt->plug_rsp);
2720 spin_unlock_bh(&peer->lock);
2722 fwtty_write_port_status(tmp);
2723 spin_lock_bh(&peer->lock);
2725 break;
2727 case FWSC_VIRT_CABLE_UNPLUG:
2728 if (work_pending(&peer->work)) {
2729 fwtty_err(&peer->unit, "unplug req: busy\n");
2730 rcode = RCODE_CONFLICT_ERROR;
2731 } else {
2732 peer->workfn = fwserial_handle_unplug_req;
2733 queue_work(system_unbound_wq, &peer->work);
2735 break;
2737 case FWSC_VIRT_CABLE_UNPLUG_RSP:
2738 if (peer->state != FWPS_UNPLUG_PENDING) {
2739 rcode = RCODE_CONFLICT_ERROR;
2740 } else {
2741 if (be16_to_cpu(pkt->hdr.code) & FWSC_RSP_NACK)
2742 fwtty_notice(&peer->unit, "NACK unplug?\n");
2743 port = peer_revert_state(peer);
2744 reset = true;
2746 break;
2748 default:
2749 fwtty_err(&peer->unit, "unknown mgmt code %d\n",
2750 be16_to_cpu(pkt->hdr.code));
2751 rcode = RCODE_DATA_ERROR;
2753 spin_unlock_bh(&peer->lock);
2755 if (port)
2756 fwserial_release_port(port, reset);
2758 return rcode;
2762 * fwserial_mgmt_handler: bus address handler for mgmt requests
2763 * @parameters: fw_address_callback_t as specified by firewire core interface
2765 * This handler is responsible for handling virtual cable requests from remotes
2766 * for all cards.
2768 static void fwserial_mgmt_handler(struct fw_card *card,
2769 struct fw_request *request,
2770 int tcode, int destination, int source,
2771 int generation,
2772 unsigned long long addr,
2773 void *data, size_t len,
2774 void *callback_data)
2776 struct fwserial_mgmt_pkt *pkt = data;
2777 struct fwtty_peer *peer;
2778 int rcode;
2780 rcu_read_lock();
2781 peer = __fwserial_peer_by_node_id(card, generation, source);
2782 if (!peer) {
2783 fwtty_dbg(card, "peer(%d:%x) not found\n", generation, source);
2784 __dump_peer_list(card);
2785 rcode = RCODE_CONFLICT_ERROR;
2787 } else {
2788 switch (tcode) {
2789 case TCODE_WRITE_BLOCK_REQUEST:
2790 rcode = fwserial_parse_mgmt_write(peer, pkt, addr, len);
2791 break;
2793 default:
2794 rcode = RCODE_TYPE_ERROR;
2798 rcu_read_unlock();
2799 fw_send_response(card, request, rcode);
2802 static int __init fwserial_init(void)
2804 int err, num_loops = !!(create_loop_dev);
2806 /* XXX: placeholder for a "firewire" debugfs node */
2807 fwserial_debugfs = debugfs_create_dir(KBUILD_MODNAME, NULL);
2809 /* num_ttys/num_ports must not be set above the static alloc avail */
2810 if (num_ttys + num_loops > MAX_CARD_PORTS)
2811 num_ttys = MAX_CARD_PORTS - num_loops;
2813 num_ports = num_ttys + num_loops;
2815 fwtty_driver = tty_alloc_driver(MAX_TOTAL_PORTS, TTY_DRIVER_REAL_RAW
2816 | TTY_DRIVER_DYNAMIC_DEV);
2817 if (IS_ERR(fwtty_driver)) {
2818 err = PTR_ERR(fwtty_driver);
2819 goto remove_debugfs;
2822 fwtty_driver->driver_name = KBUILD_MODNAME;
2823 fwtty_driver->name = tty_dev_name;
2824 fwtty_driver->major = 0;
2825 fwtty_driver->minor_start = 0;
2826 fwtty_driver->type = TTY_DRIVER_TYPE_SERIAL;
2827 fwtty_driver->subtype = SERIAL_TYPE_NORMAL;
2828 fwtty_driver->init_termios = tty_std_termios;
2829 fwtty_driver->init_termios.c_cflag |= CLOCAL;
2830 tty_set_operations(fwtty_driver, &fwtty_ops);
2832 err = tty_register_driver(fwtty_driver);
2833 if (err) {
2834 pr_err("register tty driver failed (%d)\n", err);
2835 goto put_tty;
2838 if (create_loop_dev) {
2839 fwloop_driver = tty_alloc_driver(MAX_TOTAL_PORTS / num_ports,
2840 TTY_DRIVER_REAL_RAW
2841 | TTY_DRIVER_DYNAMIC_DEV);
2842 if (IS_ERR(fwloop_driver)) {
2843 err = PTR_ERR(fwloop_driver);
2844 goto unregister_driver;
2847 fwloop_driver->driver_name = KBUILD_MODNAME "_loop";
2848 fwloop_driver->name = loop_dev_name;
2849 fwloop_driver->major = 0;
2850 fwloop_driver->minor_start = 0;
2851 fwloop_driver->type = TTY_DRIVER_TYPE_SERIAL;
2852 fwloop_driver->subtype = SERIAL_TYPE_NORMAL;
2853 fwloop_driver->init_termios = tty_std_termios;
2854 fwloop_driver->init_termios.c_cflag |= CLOCAL;
2855 tty_set_operations(fwloop_driver, &fwloop_ops);
2857 err = tty_register_driver(fwloop_driver);
2858 if (err) {
2859 pr_err("register loop driver failed (%d)\n", err);
2860 goto put_loop;
2864 fwtty_txn_cache = kmem_cache_create("fwtty_txn_cache",
2865 sizeof(struct fwtty_transaction),
2866 0, 0, fwtty_txn_constructor);
2867 if (!fwtty_txn_cache) {
2868 err = -ENOMEM;
2869 goto unregister_loop;
2873 * Ideally, this address handler would be registered per local node
2874 * (rather than the same handler for all local nodes). However,
2875 * since the firewire core requires the config rom descriptor *before*
2876 * the local unit device(s) are created, a single management handler
2877 * must suffice for all local serial units.
2879 fwserial_mgmt_addr_handler.length = sizeof(struct fwserial_mgmt_pkt);
2880 fwserial_mgmt_addr_handler.address_callback = fwserial_mgmt_handler;
2882 err = fw_core_add_address_handler(&fwserial_mgmt_addr_handler,
2883 &fwserial_mgmt_addr_region);
2884 if (err) {
2885 pr_err("add management handler failed (%d)\n", err);
2886 goto destroy_cache;
2889 fwserial_unit_directory_data.unit_addr_offset =
2890 FW_UNIT_ADDRESS(fwserial_mgmt_addr_handler.offset);
2891 err = fw_core_add_descriptor(&fwserial_unit_directory);
2892 if (err) {
2893 pr_err("add unit descriptor failed (%d)\n", err);
2894 goto remove_handler;
2897 err = driver_register(&fwserial_driver.driver);
2898 if (err) {
2899 pr_err("register fwserial driver failed (%d)\n", err);
2900 goto remove_descriptor;
2903 return 0;
2905 remove_descriptor:
2906 fw_core_remove_descriptor(&fwserial_unit_directory);
2907 remove_handler:
2908 fw_core_remove_address_handler(&fwserial_mgmt_addr_handler);
2909 destroy_cache:
2910 kmem_cache_destroy(fwtty_txn_cache);
2911 unregister_loop:
2912 if (create_loop_dev)
2913 tty_unregister_driver(fwloop_driver);
2914 put_loop:
2915 if (create_loop_dev)
2916 put_tty_driver(fwloop_driver);
2917 unregister_driver:
2918 tty_unregister_driver(fwtty_driver);
2919 put_tty:
2920 put_tty_driver(fwtty_driver);
2921 remove_debugfs:
2922 debugfs_remove_recursive(fwserial_debugfs);
2924 return err;
2927 static void __exit fwserial_exit(void)
2929 driver_unregister(&fwserial_driver.driver);
2930 fw_core_remove_descriptor(&fwserial_unit_directory);
2931 fw_core_remove_address_handler(&fwserial_mgmt_addr_handler);
2932 kmem_cache_destroy(fwtty_txn_cache);
2933 if (create_loop_dev) {
2934 tty_unregister_driver(fwloop_driver);
2935 put_tty_driver(fwloop_driver);
2937 tty_unregister_driver(fwtty_driver);
2938 put_tty_driver(fwtty_driver);
2939 debugfs_remove_recursive(fwserial_debugfs);
2942 module_init(fwserial_init);
2943 module_exit(fwserial_exit);
2945 MODULE_AUTHOR("Peter Hurley (peter@hurleysoftware.com)");
2946 MODULE_DESCRIPTION("FireWire Serial TTY Driver");
2947 MODULE_LICENSE("GPL");
2948 MODULE_DEVICE_TABLE(ieee1394, fwserial_id_table);
2949 MODULE_PARM_DESC(ttys, "Number of ttys to create for each local firewire node");
2950 MODULE_PARM_DESC(auto, "Auto-connect a tty to each firewire node discovered");
2951 MODULE_PARM_DESC(loop, "Create a loopback device, fwloop<n>, with ttys");