Linux 5.1.15
[linux/fpc-iii.git] / drivers / clocksource / timer-nps.c
blob7b6bb0df96ae5293dbe5ad1761a31d03c75997d8
1 /*
2 * Copyright (c) 2016, Mellanox Technologies. All rights reserved.
4 * This software is available to you under a choice of one of two
5 * licenses. You may choose to be licensed under the terms of the GNU
6 * General Public License (GPL) Version 2, available from the file
7 * COPYING in the main directory of this source tree, or the
8 * OpenIB.org BSD license below:
10 * Redistribution and use in source and binary forms, with or
11 * without modification, are permitted provided that the following
12 * conditions are met:
14 * - Redistributions of source code must retain the above
15 * copyright notice, this list of conditions and the following
16 * disclaimer.
18 * - Redistributions in binary form must reproduce the above
19 * copyright notice, this list of conditions and the following
20 * disclaimer in the documentation and/or other materials
21 * provided with the distribution.
23 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
24 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
25 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
26 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
27 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
28 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
29 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
30 * SOFTWARE.
33 #include <linux/interrupt.h>
34 #include <linux/clocksource.h>
35 #include <linux/clockchips.h>
36 #include <linux/clk.h>
37 #include <linux/of.h>
38 #include <linux/of_irq.h>
39 #include <linux/cpu.h>
40 #include <soc/nps/common.h>
42 #define NPS_MSU_TICK_LOW 0xC8
43 #define NPS_CLUSTER_OFFSET 8
44 #define NPS_CLUSTER_NUM 16
46 /* This array is per cluster of CPUs (Each NPS400 cluster got 256 CPUs) */
47 static void *nps_msu_reg_low_addr[NPS_CLUSTER_NUM] __read_mostly;
49 static int __init nps_get_timer_clk(struct device_node *node,
50 unsigned long *timer_freq,
51 struct clk **clk)
53 int ret;
55 *clk = of_clk_get(node, 0);
56 ret = PTR_ERR_OR_ZERO(*clk);
57 if (ret) {
58 pr_err("timer missing clk\n");
59 return ret;
62 ret = clk_prepare_enable(*clk);
63 if (ret) {
64 pr_err("Couldn't enable parent clk\n");
65 clk_put(*clk);
66 return ret;
69 *timer_freq = clk_get_rate(*clk);
70 if (!(*timer_freq)) {
71 pr_err("Couldn't get clk rate\n");
72 clk_disable_unprepare(*clk);
73 clk_put(*clk);
74 return -EINVAL;
77 return 0;
80 static u64 nps_clksrc_read(struct clocksource *clksrc)
82 int cluster = raw_smp_processor_id() >> NPS_CLUSTER_OFFSET;
84 return (u64)ioread32be(nps_msu_reg_low_addr[cluster]);
87 static int __init nps_setup_clocksource(struct device_node *node)
89 int ret, cluster;
90 struct clk *clk;
91 unsigned long nps_timer1_freq;
94 for (cluster = 0; cluster < NPS_CLUSTER_NUM; cluster++)
95 nps_msu_reg_low_addr[cluster] =
96 nps_host_reg((cluster << NPS_CLUSTER_OFFSET),
97 NPS_MSU_BLKID, NPS_MSU_TICK_LOW);
99 ret = nps_get_timer_clk(node, &nps_timer1_freq, &clk);
100 if (ret)
101 return ret;
103 ret = clocksource_mmio_init(nps_msu_reg_low_addr, "nps-tick",
104 nps_timer1_freq, 300, 32, nps_clksrc_read);
105 if (ret) {
106 pr_err("Couldn't register clock source.\n");
107 clk_disable_unprepare(clk);
110 return ret;
113 TIMER_OF_DECLARE(ezchip_nps400_clksrc, "ezchip,nps400-timer",
114 nps_setup_clocksource);
115 TIMER_OF_DECLARE(ezchip_nps400_clk_src, "ezchip,nps400-timer1",
116 nps_setup_clocksource);
118 #ifdef CONFIG_EZNPS_MTM_EXT
119 #include <soc/nps/mtm.h>
121 /* Timer related Aux registers */
122 #define NPS_REG_TIMER0_TSI 0xFFFFF850
123 #define NPS_REG_TIMER0_LIMIT 0x23
124 #define NPS_REG_TIMER0_CTRL 0x22
125 #define NPS_REG_TIMER0_CNT 0x21
128 * Interrupt Enabled (IE) - re-arm the timer
129 * Not Halted (NH) - is cleared when working with JTAG (for debug)
131 #define TIMER0_CTRL_IE BIT(0)
132 #define TIMER0_CTRL_NH BIT(1)
134 static unsigned long nps_timer0_freq;
135 static unsigned long nps_timer0_irq;
137 static void nps_clkevent_rm_thread(void)
139 int thread;
140 unsigned int cflags, enabled_threads;
142 hw_schd_save(&cflags);
144 enabled_threads = read_aux_reg(NPS_REG_TIMER0_TSI);
146 /* remove thread from TSI1 */
147 thread = read_aux_reg(CTOP_AUX_THREAD_ID);
148 enabled_threads &= ~(1 << thread);
149 write_aux_reg(NPS_REG_TIMER0_TSI, enabled_threads);
151 /* Acknowledge and if needed re-arm the timer */
152 if (!enabled_threads)
153 write_aux_reg(NPS_REG_TIMER0_CTRL, TIMER0_CTRL_NH);
154 else
155 write_aux_reg(NPS_REG_TIMER0_CTRL,
156 TIMER0_CTRL_IE | TIMER0_CTRL_NH);
158 hw_schd_restore(cflags);
161 static void nps_clkevent_add_thread(unsigned long delta)
163 int thread;
164 unsigned int cflags, enabled_threads;
166 hw_schd_save(&cflags);
168 /* add thread to TSI1 */
169 thread = read_aux_reg(CTOP_AUX_THREAD_ID);
170 enabled_threads = read_aux_reg(NPS_REG_TIMER0_TSI);
171 enabled_threads |= (1 << thread);
172 write_aux_reg(NPS_REG_TIMER0_TSI, enabled_threads);
174 /* set next timer event */
175 write_aux_reg(NPS_REG_TIMER0_LIMIT, delta);
176 write_aux_reg(NPS_REG_TIMER0_CNT, 0);
177 write_aux_reg(NPS_REG_TIMER0_CTRL,
178 TIMER0_CTRL_IE | TIMER0_CTRL_NH);
180 hw_schd_restore(cflags);
184 * Whenever anyone tries to change modes, we just mask interrupts
185 * and wait for the next event to get set.
187 static int nps_clkevent_set_state(struct clock_event_device *dev)
189 nps_clkevent_rm_thread();
190 disable_percpu_irq(nps_timer0_irq);
192 return 0;
195 static int nps_clkevent_set_next_event(unsigned long delta,
196 struct clock_event_device *dev)
198 nps_clkevent_add_thread(delta);
199 enable_percpu_irq(nps_timer0_irq, IRQ_TYPE_NONE);
201 return 0;
204 static DEFINE_PER_CPU(struct clock_event_device, nps_clockevent_device) = {
205 .name = "NPS Timer0",
206 .features = CLOCK_EVT_FEAT_ONESHOT,
207 .rating = 300,
208 .set_next_event = nps_clkevent_set_next_event,
209 .set_state_oneshot = nps_clkevent_set_state,
210 .set_state_oneshot_stopped = nps_clkevent_set_state,
211 .set_state_shutdown = nps_clkevent_set_state,
212 .tick_resume = nps_clkevent_set_state,
215 static irqreturn_t timer_irq_handler(int irq, void *dev_id)
217 struct clock_event_device *evt = dev_id;
219 nps_clkevent_rm_thread();
220 evt->event_handler(evt);
222 return IRQ_HANDLED;
225 static int nps_timer_starting_cpu(unsigned int cpu)
227 struct clock_event_device *evt = this_cpu_ptr(&nps_clockevent_device);
229 evt->cpumask = cpumask_of(smp_processor_id());
231 clockevents_config_and_register(evt, nps_timer0_freq, 0, ULONG_MAX);
232 enable_percpu_irq(nps_timer0_irq, IRQ_TYPE_NONE);
234 return 0;
237 static int nps_timer_dying_cpu(unsigned int cpu)
239 disable_percpu_irq(nps_timer0_irq);
240 return 0;
243 static int __init nps_setup_clockevent(struct device_node *node)
245 struct clk *clk;
246 int ret;
248 nps_timer0_irq = irq_of_parse_and_map(node, 0);
249 if (nps_timer0_irq <= 0) {
250 pr_err("clockevent: missing irq\n");
251 return -EINVAL;
254 ret = nps_get_timer_clk(node, &nps_timer0_freq, &clk);
255 if (ret)
256 return ret;
258 /* Needs apriori irq_set_percpu_devid() done in intc map function */
259 ret = request_percpu_irq(nps_timer0_irq, timer_irq_handler,
260 "Timer0 (per-cpu-tick)",
261 &nps_clockevent_device);
262 if (ret) {
263 pr_err("Couldn't request irq\n");
264 clk_disable_unprepare(clk);
265 return ret;
268 ret = cpuhp_setup_state(CPUHP_AP_ARC_TIMER_STARTING,
269 "clockevents/nps:starting",
270 nps_timer_starting_cpu,
271 nps_timer_dying_cpu);
272 if (ret) {
273 pr_err("Failed to setup hotplug state\n");
274 clk_disable_unprepare(clk);
275 free_percpu_irq(nps_timer0_irq, &nps_clockevent_device);
276 return ret;
279 return 0;
282 TIMER_OF_DECLARE(ezchip_nps400_clk_evt, "ezchip,nps400-timer0",
283 nps_setup_clockevent);
284 #endif /* CONFIG_EZNPS_MTM_EXT */