drivers/crypto/caam/error.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * CAAM Error Reporting
   4  *
   5  * Copyright 2009-2011 Freescale Semiconductor, Inc.
   6  */
   7
   8 #include "compat.h"
   9 #include "regs.h"
  10 #include "desc.h"
  11 #include "error.h"
  12
  13 #ifdef DEBUG
  14 #include <linux/highmem.h>
  15
  16 void caam_dump_sg(const char *level, const char *prefix_str, int prefix_type,
  17                   int rowsize, int groupsize, struct scatterlist *sg,
  18                   size_t tlen, bool ascii)
  19 {
  20         struct scatterlist *it;
  21         void *it_page;
  22         size_t len;
  23         void *buf;
  24
  25         for (it = sg; it && tlen > 0 ; it = sg_next(sg)) {
  26                 /*
  27                  * make sure the scatterlist's page
  28                  * has a valid virtual memory mapping
  29                  */
  30                 it_page = kmap_atomic(sg_page(it));
  31                 if (unlikely(!it_page)) {
  32                         pr_err("caam_dump_sg: kmap failed\n");
  33                         return;
  34                 }
  35
  36                 buf = it_page + it->offset;
  37                 len = min_t(size_t, tlen, it->length);
  38                 print_hex_dump(level, prefix_str, prefix_type, rowsize,
  39                                groupsize, buf, len, ascii);
  40                 tlen -= len;
  41
  42                 kunmap_atomic(it_page);
  43         }
  44 }
  45 #else
  46 void caam_dump_sg(const char *level, const char *prefix_str, int prefix_type,
  47                   int rowsize, int groupsize, struct scatterlist *sg,
  48                   size_t tlen, bool ascii)
  49 {}
  50 #endif /* DEBUG */
  51 EXPORT_SYMBOL(caam_dump_sg);
  52
  53 bool caam_little_end;
  54 EXPORT_SYMBOL(caam_little_end);
  55
  56 bool caam_imx;
  57 EXPORT_SYMBOL(caam_imx);
  58
  59 static const struct {
  60         u8 value;
  61         const char *error_text;
  62 } desc_error_list[] = {
  63         { 0x00, "No error." },
  64         { 0x01, "SGT Length Error. The descriptor is trying to read more data than is contained in the SGT table." },
  65         { 0x02, "SGT Null Entry Error." },
  66         { 0x03, "Job Ring Control Error. There is a bad value in the Job Ring Control register." },
  67         { 0x04, "Invalid Descriptor Command. The Descriptor Command field is invalid." },
  68         { 0x05, "Reserved." },
  69         { 0x06, "Invalid KEY Command" },
  70         { 0x07, "Invalid LOAD Command" },
  71         { 0x08, "Invalid STORE Command" },
  72         { 0x09, "Invalid OPERATION Command" },
  73         { 0x0A, "Invalid FIFO LOAD Command" },
  74         { 0x0B, "Invalid FIFO STORE Command" },
  75         { 0x0C, "Invalid MOVE/MOVE_LEN Command" },
  76         { 0x0D, "Invalid JUMP Command. A nonlocal JUMP Command is invalid because the target is not a Job Header Command, or the jump is from a Trusted Descriptor to a Job Descriptor, or because the target Descriptor contains a Shared Descriptor." },
  77         { 0x0E, "Invalid MATH Command" },
  78         { 0x0F, "Invalid SIGNATURE Command" },
  79         { 0x10, "Invalid Sequence Command. A SEQ IN PTR OR SEQ OUT PTR Command is invalid or a SEQ KEY, SEQ LOAD, SEQ FIFO LOAD, or SEQ FIFO STORE decremented the input or output sequence length below 0. This error may result if a built-in PROTOCOL Command has encountered a malformed PDU." },
  80         { 0x11, "Skip data type invalid. The type must be 0xE or 0xF."},
  81         { 0x12, "Shared Descriptor Header Error" },
  82         { 0x13, "Header Error. Invalid length or parity, or certain other problems." },
  83         { 0x14, "Burster Error. Burster has gotten to an illegal state" },
  84         { 0x15, "Context Register Length Error. The descriptor is trying to read or write past the end of the Context Register. A SEQ LOAD or SEQ STORE with the VLF bit set was executed with too large a length in the variable length register (VSOL for SEQ STORE or VSIL for SEQ LOAD)." },
  85         { 0x16, "DMA Error" },
  86         { 0x17, "Reserved." },
  87         { 0x1A, "Job failed due to JR reset" },
  88         { 0x1B, "Job failed due to Fail Mode" },
  89         { 0x1C, "DECO Watchdog timer timeout error" },
  90         { 0x1D, "DECO tried to copy a key from another DECO but the other DECO's Key Registers were locked" },
  91         { 0x1E, "DECO attempted to copy data from a DECO that had an unmasked Descriptor error" },
  92         { 0x1F, "LIODN error. DECO was trying to share from itself or from another DECO but the two Non-SEQ LIODN values didn't match or the 'shared from' DECO's Descriptor required that the SEQ LIODNs be the same and they aren't." },
  93         { 0x20, "DECO has completed a reset initiated via the DRR register" },
  94         { 0x21, "Nonce error. When using EKT (CCM) key encryption option in the FIFO STORE Command, the Nonce counter reached its maximum value and this encryption mode can no longer be used." },
  95         { 0x22, "Meta data is too large (> 511 bytes) for TLS decap (input frame; block ciphers) and IPsec decap (output frame, when doing the next header byte update) and DCRC (output frame)." },
  96         { 0x23, "Read Input Frame error" },
  97         { 0x24, "JDKEK, TDKEK or TDSK not loaded error" },
  98         { 0x80, "DNR (do not run) error" },
  99         { 0x81, "undefined protocol command" },
 100         { 0x82, "invalid setting in PDB" },
 101         { 0x83, "Anti-replay LATE error" },
 102         { 0x84, "Anti-replay REPLAY error" },
 103         { 0x85, "Sequence number overflow" },
 104         { 0x86, "Sigver invalid signature" },
 105         { 0x87, "DSA Sign Illegal test descriptor" },
 106         { 0x88, "Protocol Format Error - A protocol has seen an error in the format of data received. When running RSA, this means that formatting with random padding was used, and did not follow the form: 0x00, 0x02, 8-to-N bytes of non-zero pad, 0x00, F data." },
 107         { 0x89, "Protocol Size Error - A protocol has seen an error in size. When running RSA, pdb size N < (size of F) when no formatting is used; or pdb size N < (F + 11) when formatting is used." },
 108         { 0xC1, "Blob Command error: Undefined mode" },
 109         { 0xC2, "Blob Command error: Secure Memory Blob mode error" },
 110         { 0xC4, "Blob Command error: Black Blob key or input size error" },
 111         { 0xC5, "Blob Command error: Invalid key destination" },
 112         { 0xC8, "Blob Command error: Trusted/Secure mode error" },
 113         { 0xF0, "IPsec TTL or hop limit field either came in as 0, or was decremented to 0" },
 114         { 0xF1, "3GPP HFN matches or exceeds the Threshold" },
 115 };
 116
 117 static const struct {
 118         u8 value;
 119         const char *error_text;
 120 } qi_error_list[] = {
 121         { 0x1F, "Job terminated by FQ or ICID flush" },
 122         { 0x20, "FD format error"},
 123         { 0x21, "FD command format error"},
 124         { 0x23, "FL format error"},
 125         { 0x25, "CRJD specified in FD, but not enabled in FLC"},
 126         { 0x30, "Max. buffer size too small"},
 127         { 0x31, "DHR exceeds max. buffer size (allocate mode, S/G format)"},
 128         { 0x32, "SGT exceeds max. buffer size (allocate mode, S/G format"},
 129         { 0x33, "Size over/underflow (allocate mode)"},
 130         { 0x34, "Size over/underflow (reuse mode)"},
 131         { 0x35, "Length exceeds max. short length (allocate mode, S/G/ format)"},
 132         { 0x36, "Memory footprint exceeds max. value (allocate mode, S/G/ format)"},
 133         { 0x41, "SBC frame format not supported (allocate mode)"},
 134         { 0x42, "Pool 0 invalid / pool 1 size < pool 0 size (allocate mode)"},
 135         { 0x43, "Annotation output enabled but ASAR = 0 (allocate mode)"},
 136         { 0x44, "Unsupported or reserved frame format or SGHR = 1 (reuse mode)"},
 137         { 0x45, "DHR correction underflow (reuse mode, single buffer format)"},
 138         { 0x46, "Annotation length exceeds offset (reuse mode)"},
 139         { 0x48, "Annotation output enabled but ASA limited by ASAR (reuse mode)"},
 140         { 0x49, "Data offset correction exceeds input frame data length (reuse mode)"},
 141         { 0x4B, "Annotation output enabled but ASA cannote be expanded (frame list)"},
 142         { 0x51, "Unsupported IF reuse mode"},
 143         { 0x52, "Unsupported FL use mode"},
 144         { 0x53, "Unsupported RJD use mode"},
 145         { 0x54, "Unsupported inline descriptor use mode"},
 146         { 0xC0, "Table buffer pool 0 depletion"},
 147         { 0xC1, "Table buffer pool 1 depletion"},
 148         { 0xC2, "Data buffer pool 0 depletion, no OF allocated"},
 149         { 0xC3, "Data buffer pool 1 depletion, no OF allocated"},
 150         { 0xC4, "Data buffer pool 0 depletion, partial OF allocated"},
 151         { 0xC5, "Data buffer pool 1 depletion, partial OF allocated"},
 152         { 0xD0, "FLC read error"},
 153         { 0xD1, "FL read error"},
 154         { 0xD2, "FL write error"},
 155         { 0xD3, "OF SGT write error"},
 156         { 0xD4, "PTA read error"},
 157         { 0xD5, "PTA write error"},
 158         { 0xD6, "OF SGT F-bit write error"},
 159         { 0xD7, "ASA write error"},
 160         { 0xE1, "FLC[ICR]=0 ICID error"},
 161         { 0xE2, "FLC[ICR]=1 ICID error"},
 162         { 0xE4, "source of ICID flush not trusted (BDI = 0)"},
 163 };
 164
 165 static const char * const cha_id_list[] = {
 166         "",
 167         "AES",
 168         "DES",
 169         "ARC4",
 170         "MDHA",
 171         "RNG",
 172         "SNOW f8",
 173         "Kasumi f8/9",
 174         "PKHA",
 175         "CRCA",
 176         "SNOW f9",
 177         "ZUCE",
 178         "ZUCA",
 179 };
 180
 181 static const char * const err_id_list[] = {
 182         "No error.",
 183         "Mode error.",
 184         "Data size error.",
 185         "Key size error.",
 186         "PKHA A memory size error.",
 187         "PKHA B memory size error.",
 188         "Data arrived out of sequence error.",
 189         "PKHA divide-by-zero error.",
 190         "PKHA modulus even error.",
 191         "DES key parity error.",
 192         "ICV check failed.",
 193         "Hardware error.",
 194         "Unsupported CCM AAD size.",
 195         "Class 1 CHA is not reset",
 196         "Invalid CHA combination was selected",
 197         "Invalid CHA selected.",
 198 };
 199
 200 static const char * const rng_err_id_list[] = {
 201         "",
 202         "",
 203         "",
 204         "Instantiate",
 205         "Not instantiated",
 206         "Test instantiate",
 207         "Prediction resistance",
 208         "Prediction resistance and test request",
 209         "Uninstantiate",
 210         "Secure key generation",
 211 };
 212
 213 static void report_ccb_status(struct device *jrdev, const u32 status,
 214                               const char *error)
 215 {
 216         u8 cha_id = (status & JRSTA_CCBERR_CHAID_MASK) >>
 217                     JRSTA_CCBERR_CHAID_SHIFT;
 218         u8 err_id = status & JRSTA_CCBERR_ERRID_MASK;
 219         u8 idx = (status & JRSTA_DECOERR_INDEX_MASK) >>
 220                   JRSTA_DECOERR_INDEX_SHIFT;
 221         char *idx_str;
 222         const char *cha_str = "unidentified cha_id value 0x";
 223         char cha_err_code[3] = { 0 };
 224         const char *err_str = "unidentified err_id value 0x";
 225         char err_err_code[3] = { 0 };
 226
 227         if (status & JRSTA_DECOERR_JUMP)
 228                 idx_str = "jump tgt desc idx";
 229         else
 230                 idx_str = "desc idx";
 231
 232         if (cha_id < ARRAY_SIZE(cha_id_list))
 233                 cha_str = cha_id_list[cha_id];
 234         else
 235                 snprintf(cha_err_code, sizeof(cha_err_code), "%02x", cha_id);
 236
 237         if ((cha_id << JRSTA_CCBERR_CHAID_SHIFT) == JRSTA_CCBERR_CHAID_RNG &&
 238             err_id < ARRAY_SIZE(rng_err_id_list) &&
 239             strlen(rng_err_id_list[err_id])) {
 240                 /* RNG-only error */
 241                 err_str = rng_err_id_list[err_id];
 242         } else {
 243                 err_str = err_id_list[err_id];
 244         }
 245
 246         /*
 247          * CCB ICV check failures are part of normal operation life;
 248          * we leave the upper layers to do what they want with them.
 249          */
 250         if (err_id != JRSTA_CCBERR_ERRID_ICVCHK)
 251                 dev_err(jrdev, "%08x: %s: %s %d: %s%s: %s%s\n",
 252                         status, error, idx_str, idx,
 253                         cha_str, cha_err_code,
 254                         err_str, err_err_code);
 255 }
 256
 257 static void report_jump_status(struct device *jrdev, const u32 status,
 258                                const char *error)
 259 {
 260         dev_err(jrdev, "%08x: %s: %s() not implemented\n",
 261                 status, error, __func__);
 262 }
 263
 264 static void report_deco_status(struct device *jrdev, const u32 status,
 265                                const char *error)
 266 {
 267         u8 err_id = status & JRSTA_DECOERR_ERROR_MASK;
 268         u8 idx = (status & JRSTA_DECOERR_INDEX_MASK) >>
 269                   JRSTA_DECOERR_INDEX_SHIFT;
 270         char *idx_str;
 271         const char *err_str = "unidentified error value 0x";
 272         char err_err_code[3] = { 0 };
 273         int i;
 274
 275         if (status & JRSTA_DECOERR_JUMP)
 276                 idx_str = "jump tgt desc idx";
 277         else
 278                 idx_str = "desc idx";
 279
 280         for (i = 0; i < ARRAY_SIZE(desc_error_list); i++)
 281                 if (desc_error_list[i].value == err_id)
 282                         break;
 283
 284         if (i != ARRAY_SIZE(desc_error_list) && desc_error_list[i].error_text)
 285                 err_str = desc_error_list[i].error_text;
 286         else
 287                 snprintf(err_err_code, sizeof(err_err_code), "%02x", err_id);
 288
 289         dev_err(jrdev, "%08x: %s: %s %d: %s%s\n",
 290                 status, error, idx_str, idx, err_str, err_err_code);
 291 }
 292
 293 static void report_qi_status(struct device *qidev, const u32 status,
 294                              const char *error)
 295 {
 296         u8 err_id = status & JRSTA_QIERR_ERROR_MASK;
 297         const char *err_str = "unidentified error value 0x";
 298         char err_err_code[3] = { 0 };
 299         int i;
 300
 301         for (i = 0; i < ARRAY_SIZE(qi_error_list); i++)
 302                 if (qi_error_list[i].value == err_id)
 303                         break;
 304
 305         if (i != ARRAY_SIZE(qi_error_list) && qi_error_list[i].error_text)
 306                 err_str = qi_error_list[i].error_text;
 307         else
 308                 snprintf(err_err_code, sizeof(err_err_code), "%02x", err_id);
 309
 310         dev_err(qidev, "%08x: %s: %s%s\n",
 311                 status, error, err_str, err_err_code);
 312 }
 313
 314 static void report_jr_status(struct device *jrdev, const u32 status,
 315                              const char *error)
 316 {
 317         dev_err(jrdev, "%08x: %s: %s() not implemented\n",
 318                 status, error, __func__);
 319 }
 320
 321 static void report_cond_code_status(struct device *jrdev, const u32 status,
 322                                     const char *error)
 323 {
 324         dev_err(jrdev, "%08x: %s: %s() not implemented\n",
 325                 status, error, __func__);
 326 }
 327
 328 void caam_strstatus(struct device *jrdev, u32 status, bool qi_v2)
 329 {
 330         static const struct stat_src {
 331                 void (*report_ssed)(struct device *jrdev, const u32 status,
 332                                     const char *error);
 333                 const char *error;
 334         } status_src[16] = {
 335                 { NULL, "No error" },
 336                 { NULL, NULL },
 337                 { report_ccb_status, "CCB" },
 338                 { report_jump_status, "Jump" },
 339                 { report_deco_status, "DECO" },
 340                 { report_qi_status, "Queue Manager Interface" },
 341                 { report_jr_status, "Job Ring" },
 342                 { report_cond_code_status, "Condition Code" },
 343                 { NULL, NULL },
 344                 { NULL, NULL },
 345                 { NULL, NULL },
 346                 { NULL, NULL },
 347                 { NULL, NULL },
 348                 { NULL, NULL },
 349                 { NULL, NULL },
 350                 { NULL, NULL },
 351         };
 352         u32 ssrc = status >> JRSTA_SSRC_SHIFT;
 353         const char *error = status_src[ssrc].error;
 354
 355         /*
 356          * If there is an error handling function, call it to report the error.
 357          * Otherwise print the error source name.
 358          */
 359         if (status_src[ssrc].report_ssed)
 360                 status_src[ssrc].report_ssed(jrdev, status, error);
 361         else if (error)
 362                 dev_err(jrdev, "%d: %s\n", ssrc, error);
 363         else
 364                 dev_err(jrdev, "%d: unknown error source\n", ssrc);
 365 }
 366 EXPORT_SYMBOL(caam_strstatus);
 367
 368 MODULE_LICENSE("GPL");
 369 MODULE_DESCRIPTION("FSL CAAM error reporting");
 370 MODULE_AUTHOR("Freescale Semiconductor");