Linux 5.1.15

[linux/fpc-iii.git] / drivers / firmware / qcom_scm-32.c

/* Copyright (c) 2010,2015, The Linux Foundation. All rights reserved.
 * Copyright (C) 2015 Linaro Ltd.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
 * 02110-1301, USA.
 */

#include <linux/slab.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/qcom_scm.h>
#include <linux/dma-mapping.h>

#include "qcom_scm.h"

#define QCOM_SCM_FLAG_COLDBOOT_CPU0     0x00
#define QCOM_SCM_FLAG_COLDBOOT_CPU1     0x01
#define QCOM_SCM_FLAG_COLDBOOT_CPU2     0x08
#define QCOM_SCM_FLAG_COLDBOOT_CPU3     0x20

#define QCOM_SCM_FLAG_WARMBOOT_CPU0     0x04
#define QCOM_SCM_FLAG_WARMBOOT_CPU1     0x02
#define QCOM_SCM_FLAG_WARMBOOT_CPU2     0x10
#define QCOM_SCM_FLAG_WARMBOOT_CPU3     0x40

struct qcom_scm_entry {
        int flag;
        void *entry;
};

static struct qcom_scm_entry qcom_scm_wb[] = {
        { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU0 },
        { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU1 },
        { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU2 },
        { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU3 },
};

static DEFINE_MUTEX(qcom_scm_lock);

/**
 * struct qcom_scm_command - one SCM command buffer
 * @len: total available memory for command and response
 * @buf_offset: start of command buffer
 * @resp_hdr_offset: start of response buffer
 * @id: command to be executed
 * @buf: buffer returned from qcom_scm_get_command_buffer()
 *
 * An SCM command is laid out in memory as follows:
 *
 *      ------------------- <--- struct qcom_scm_command
 *      | command header  |
 *      ------------------- <--- qcom_scm_get_command_buffer()
 *      | command buffer  |
 *      ------------------- <--- struct qcom_scm_response and
 *      | response header |      qcom_scm_command_to_response()
 *      ------------------- <--- qcom_scm_get_response_buffer()
 *      | response buffer |
 *      -------------------
 *
 * There can be arbitrary padding between the headers and buffers so
 * you should always use the appropriate qcom_scm_get_*_buffer() routines
 * to access the buffers in a safe manner.
 */
struct qcom_scm_command {
        __le32 len;
        __le32 buf_offset;
        __le32 resp_hdr_offset;
        __le32 id;
        __le32 buf[0];
};

/**
 * struct qcom_scm_response - one SCM response buffer
 * @len: total available memory for response
 * @buf_offset: start of response data relative to start of qcom_scm_response
 * @is_complete: indicates if the command has finished processing
 */
struct qcom_scm_response {
        __le32 len;
        __le32 buf_offset;
        __le32 is_complete;
};

/**
 * qcom_scm_command_to_response() - Get a pointer to a qcom_scm_response
 * @cmd: command
 *
 * Returns a pointer to a response for a command.
 */
static inline struct qcom_scm_response *qcom_scm_command_to_response(
                const struct qcom_scm_command *cmd)
{
        return (void *)cmd + le32_to_cpu(cmd->resp_hdr_offset);
}

/**
 * qcom_scm_get_command_buffer() - Get a pointer to a command buffer
 * @cmd: command
 *
 * Returns a pointer to the command buffer of a command.
 */
static inline void *qcom_scm_get_command_buffer(const struct qcom_scm_command *cmd)
{
        return (void *)cmd->buf;
}

/**
 * qcom_scm_get_response_buffer() - Get a pointer to a response buffer
 * @rsp: response
 *
 * Returns a pointer to a response buffer of a response.
 */
static inline void *qcom_scm_get_response_buffer(const struct qcom_scm_response *rsp)
{
        return (void *)rsp + le32_to_cpu(rsp->buf_offset);
}

static u32 smc(u32 cmd_addr)
{
        int context_id;
        register u32 r0 asm("r0") = 1;
        register u32 r1 asm("r1") = (u32)&context_id;
        register u32 r2 asm("r2") = cmd_addr;
        do {
                asm volatile(
                        __asmeq("%0", "r0")
                        __asmeq("%1", "r0")
                        __asmeq("%2", "r1")
                        __asmeq("%3", "r2")
#ifdef REQUIRES_SEC
                        ".arch_extension sec\n"
#endif
                        "smc    #0      @ switch to secure world\n"
                        : "=r" (r0)
                        : "r" (r0), "r" (r1), "r" (r2)
                        : "r3", "r12");
        } while (r0 == QCOM_SCM_INTERRUPTED);

        return r0;
}

/**
 * qcom_scm_call() - Send an SCM command
 * @dev: struct device
 * @svc_id: service identifier
 * @cmd_id: command identifier
 * @cmd_buf: command buffer
 * @cmd_len: length of the command buffer
 * @resp_buf: response buffer
 * @resp_len: length of the response buffer
 *
 * Sends a command to the SCM and waits for the command to finish processing.
 *
 * A note on cache maintenance:
 * Note that any buffers that are expected to be accessed by the secure world
 * must be flushed before invoking qcom_scm_call and invalidated in the cache
 * immediately after qcom_scm_call returns. Cache maintenance on the command
 * and response buffers is taken care of by qcom_scm_call; however, callers are
 * responsible for any other cached buffers passed over to the secure world.
 */
static int qcom_scm_call(struct device *dev, u32 svc_id, u32 cmd_id,
                         const void *cmd_buf, size_t cmd_len, void *resp_buf,
                         size_t resp_len)
{
        int ret;
        struct qcom_scm_command *cmd;
        struct qcom_scm_response *rsp;
        size_t alloc_len = sizeof(*cmd) + cmd_len + sizeof(*rsp) + resp_len;
        dma_addr_t cmd_phys;

        cmd = kzalloc(PAGE_ALIGN(alloc_len), GFP_KERNEL);
        if (!cmd)
                return -ENOMEM;

        cmd->len = cpu_to_le32(alloc_len);
        cmd->buf_offset = cpu_to_le32(sizeof(*cmd));
        cmd->resp_hdr_offset = cpu_to_le32(sizeof(*cmd) + cmd_len);

        cmd->id = cpu_to_le32((svc_id << 10) | cmd_id);
        if (cmd_buf)
                memcpy(qcom_scm_get_command_buffer(cmd), cmd_buf, cmd_len);

        rsp = qcom_scm_command_to_response(cmd);

        cmd_phys = dma_map_single(dev, cmd, alloc_len, DMA_TO_DEVICE);
        if (dma_mapping_error(dev, cmd_phys)) {
                kfree(cmd);
                return -ENOMEM;
        }

        mutex_lock(&qcom_scm_lock);
        ret = smc(cmd_phys);
        if (ret < 0)
                ret = qcom_scm_remap_error(ret);
        mutex_unlock(&qcom_scm_lock);
        if (ret)
                goto out;

        do {
                dma_sync_single_for_cpu(dev, cmd_phys + sizeof(*cmd) + cmd_len,
                                        sizeof(*rsp), DMA_FROM_DEVICE);
        } while (!rsp->is_complete);

        if (resp_buf) {
                dma_sync_single_for_cpu(dev, cmd_phys + sizeof(*cmd) + cmd_len +
                                        le32_to_cpu(rsp->buf_offset),
                                        resp_len, DMA_FROM_DEVICE);
                memcpy(resp_buf, qcom_scm_get_response_buffer(rsp),
                       resp_len);
        }
out:
        dma_unmap_single(dev, cmd_phys, alloc_len, DMA_TO_DEVICE);
        kfree(cmd);
        return ret;
}

#define SCM_CLASS_REGISTER      (0x2 << 8)
#define SCM_MASK_IRQS           BIT(5)
#define SCM_ATOMIC(svc, cmd, n) (((((svc) << 10)|((cmd) & 0x3ff)) << 12) | \
                                SCM_CLASS_REGISTER | \
                                SCM_MASK_IRQS | \
                                (n & 0xf))

/**
 * qcom_scm_call_atomic1() - Send an atomic SCM command with one argument
 * @svc_id: service identifier
 * @cmd_id: command identifier
 * @arg1: first argument
 *
 * This shall only be used with commands that are guaranteed to be
 * uninterruptable, atomic and SMP safe.
 */
static s32 qcom_scm_call_atomic1(u32 svc, u32 cmd, u32 arg1)
{
        int context_id;

        register u32 r0 asm("r0") = SCM_ATOMIC(svc, cmd, 1);
        register u32 r1 asm("r1") = (u32)&context_id;
        register u32 r2 asm("r2") = arg1;

        asm volatile(
                        __asmeq("%0", "r0")
                        __asmeq("%1", "r0")
                        __asmeq("%2", "r1")
                        __asmeq("%3", "r2")
#ifdef REQUIRES_SEC
                        ".arch_extension sec\n"
#endif
                        "smc    #0      @ switch to secure world\n"
                        : "=r" (r0)
                        : "r" (r0), "r" (r1), "r" (r2)
                        : "r3", "r12");
        return r0;
}

/**
 * qcom_scm_call_atomic2() - Send an atomic SCM command with two arguments
 * @svc_id:     service identifier
 * @cmd_id:     command identifier
 * @arg1:       first argument
 * @arg2:       second argument
 *
 * This shall only be used with commands that are guaranteed to be
 * uninterruptable, atomic and SMP safe.
 */
static s32 qcom_scm_call_atomic2(u32 svc, u32 cmd, u32 arg1, u32 arg2)
{
        int context_id;

        register u32 r0 asm("r0") = SCM_ATOMIC(svc, cmd, 2);
        register u32 r1 asm("r1") = (u32)&context_id;
        register u32 r2 asm("r2") = arg1;
        register u32 r3 asm("r3") = arg2;

        asm volatile(
                        __asmeq("%0", "r0")
                        __asmeq("%1", "r0")
                        __asmeq("%2", "r1")
                        __asmeq("%3", "r2")
                        __asmeq("%4", "r3")
#ifdef REQUIRES_SEC
                        ".arch_extension sec\n"
#endif
                        "smc    #0      @ switch to secure world\n"
                        : "=r" (r0)
                        : "r" (r0), "r" (r1), "r" (r2), "r" (r3)
                        : "r12");
        return r0;
}

u32 qcom_scm_get_version(void)
{
        int context_id;
        static u32 version = -1;
        register u32 r0 asm("r0");
        register u32 r1 asm("r1");

        if (version != -1)
                return version;

        mutex_lock(&qcom_scm_lock);

        r0 = 0x1 << 8;
        r1 = (u32)&context_id;
        do {
                asm volatile(
                        __asmeq("%0", "r0")
                        __asmeq("%1", "r1")
                        __asmeq("%2", "r0")
                        __asmeq("%3", "r1")
#ifdef REQUIRES_SEC
                        ".arch_extension sec\n"
#endif
                        "smc    #0      @ switch to secure world\n"
                        : "=r" (r0), "=r" (r1)
                        : "r" (r0), "r" (r1)
                        : "r2", "r3", "r12");
        } while (r0 == QCOM_SCM_INTERRUPTED);

        version = r1;
        mutex_unlock(&qcom_scm_lock);

        return version;
}
EXPORT_SYMBOL(qcom_scm_get_version);

/**
 * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
 * @entry: Entry point function for the cpus
 * @cpus: The cpumask of cpus that will use the entry point
 *
 * Set the cold boot address of the cpus. Any cpu outside the supported
 * range would be removed from the cpu present mask.
 */
int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
{
        int flags = 0;
        int cpu;
        int scm_cb_flags[] = {
                QCOM_SCM_FLAG_COLDBOOT_CPU0,
                QCOM_SCM_FLAG_COLDBOOT_CPU1,
                QCOM_SCM_FLAG_COLDBOOT_CPU2,
                QCOM_SCM_FLAG_COLDBOOT_CPU3,
        };

        if (!cpus || (cpus && cpumask_empty(cpus)))
                return -EINVAL;

        for_each_cpu(cpu, cpus) {
                if (cpu < ARRAY_SIZE(scm_cb_flags))
                        flags |= scm_cb_flags[cpu];
                else
                        set_cpu_present(cpu, false);
        }

        return qcom_scm_call_atomic2(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR,
                                    flags, virt_to_phys(entry));
}

/**
 * qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
 * @entry: Entry point function for the cpus
 * @cpus: The cpumask of cpus that will use the entry point
 *
 * Set the Linux entry point for the SCM to transfer control to when coming
 * out of a power down. CPU power down may be executed on cpuidle or hotplug.
 */
int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
                                  const cpumask_t *cpus)
{
        int ret;
        int flags = 0;
        int cpu;
        struct {
                __le32 flags;
                __le32 addr;
        } cmd;

        /*
         * Reassign only if we are switching from hotplug entry point
         * to cpuidle entry point or vice versa.
         */
        for_each_cpu(cpu, cpus) {
                if (entry == qcom_scm_wb[cpu].entry)
                        continue;
                flags |= qcom_scm_wb[cpu].flag;
        }

        /* No change in entry function */
        if (!flags)
                return 0;

        cmd.addr = cpu_to_le32(virt_to_phys(entry));
        cmd.flags = cpu_to_le32(flags);
        ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR,
                            &cmd, sizeof(cmd), NULL, 0);
        if (!ret) {
                for_each_cpu(cpu, cpus)
                        qcom_scm_wb[cpu].entry = entry;
        }

        return ret;
}

/**
 * qcom_scm_cpu_power_down() - Power down the cpu
 * @flags - Flags to flush cache
 *
 * This is an end point to power down cpu. If there was a pending interrupt,
 * the control would return from this function, otherwise, the cpu jumps to the
 * warm boot entry point set for this cpu upon reset.
 */
void __qcom_scm_cpu_power_down(u32 flags)
{
        qcom_scm_call_atomic1(QCOM_SCM_SVC_BOOT, QCOM_SCM_CMD_TERMINATE_PC,
                        flags & QCOM_SCM_FLUSH_FLAG_MASK);
}

int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id)
{
        int ret;
        __le32 svc_cmd = cpu_to_le32((svc_id << 10) | cmd_id);
        __le32 ret_val = 0;

        ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD,
                            &svc_cmd, sizeof(svc_cmd), &ret_val,
                            sizeof(ret_val));
        if (ret)
                return ret;

        return le32_to_cpu(ret_val);
}

int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req *req,
                        u32 req_cnt, u32 *resp)
{
        if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
                return -ERANGE;

        return qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP,
                req, req_cnt * sizeof(*req), resp, sizeof(*resp));
}

void __qcom_scm_init(void)
{
}

bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral)
{
        __le32 out;
        __le32 in;
        int ret;

        in = cpu_to_le32(peripheral);
        ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
                            QCOM_SCM_PAS_IS_SUPPORTED_CMD,
                            &in, sizeof(in),
                            &out, sizeof(out));

        return ret ? false : !!out;
}

int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
                              dma_addr_t metadata_phys)
{
        __le32 scm_ret;
        int ret;
        struct {
                __le32 proc;
                __le32 image_addr;
        } request;

        request.proc = cpu_to_le32(peripheral);
        request.image_addr = cpu_to_le32(metadata_phys);

        ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
                            QCOM_SCM_PAS_INIT_IMAGE_CMD,
                            &request, sizeof(request),
                            &scm_ret, sizeof(scm_ret));

        return ret ? : le32_to_cpu(scm_ret);
}

int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
                             phys_addr_t addr, phys_addr_t size)
{
        __le32 scm_ret;
        int ret;
        struct {
                __le32 proc;
                __le32 addr;
                __le32 len;
        } request;

        request.proc = cpu_to_le32(peripheral);
        request.addr = cpu_to_le32(addr);
        request.len = cpu_to_le32(size);

        ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
                            QCOM_SCM_PAS_MEM_SETUP_CMD,
                            &request, sizeof(request),
                            &scm_ret, sizeof(scm_ret));

        return ret ? : le32_to_cpu(scm_ret);
}

int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral)
{
        __le32 out;
        __le32 in;
        int ret;

        in = cpu_to_le32(peripheral);
        ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
                            QCOM_SCM_PAS_AUTH_AND_RESET_CMD,
                            &in, sizeof(in),
                            &out, sizeof(out));

        return ret ? : le32_to_cpu(out);
}

int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral)
{
        __le32 out;
        __le32 in;
        int ret;

        in = cpu_to_le32(peripheral);
        ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
                            QCOM_SCM_PAS_SHUTDOWN_CMD,
                            &in, sizeof(in),
                            &out, sizeof(out));

        return ret ? : le32_to_cpu(out);
}

int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
{
        __le32 out;
        __le32 in = cpu_to_le32(reset);
        int ret;

        ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MSS_RESET,
                        &in, sizeof(in),
                        &out, sizeof(out));

        return ret ? : le32_to_cpu(out);
}

int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
{
        return qcom_scm_call_atomic2(QCOM_SCM_SVC_BOOT, QCOM_SCM_SET_DLOAD_MODE,
                                     enable ? QCOM_SCM_SET_DLOAD_MODE : 0, 0);
}

int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
{
        struct {
                __le32 state;
                __le32 id;
        } req;
        __le32 scm_ret = 0;
        int ret;

        req.state = cpu_to_le32(state);
        req.id = cpu_to_le32(id);

        ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_SET_REMOTE_STATE,
                            &req, sizeof(req), &scm_ret, sizeof(scm_ret));

        return ret ? : le32_to_cpu(scm_ret);
}

int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region,
                          size_t mem_sz, phys_addr_t src, size_t src_sz,
                          phys_addr_t dest, size_t dest_sz)
{
        return -ENODEV;
}

int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
                               u32 spare)
{
        return -ENODEV;
}

int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
                                      size_t *size)
{
        return -ENODEV;
}

int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr, u32 size,
                                      u32 spare)
{
        return -ENODEV;
}

int __qcom_scm_io_readl(struct device *dev, phys_addr_t addr,
                        unsigned int *val)
{
        int ret;

        ret = qcom_scm_call_atomic1(QCOM_SCM_SVC_IO, QCOM_SCM_IO_READ, addr);
        if (ret >= 0)
                *val = ret;

        return ret < 0 ? ret : 0;
}

int __qcom_scm_io_writel(struct device *dev, phys_addr_t addr, unsigned int val)
{
        return qcom_scm_call_atomic2(QCOM_SCM_SVC_IO, QCOM_SCM_IO_WRITE,
                                     addr, val);
}