drivers/input/rmi4/rmi_f12.c

   1 /*
   2  * Copyright (c) 2012-2016 Synaptics Incorporated
   3  *
   4  * This program is free software; you can redistribute it and/or modify it
   5  * under the terms of the GNU General Public License version 2 as published by
   6  * the Free Software Foundation.
   7  */
   8 #include <linux/input.h>
   9 #include <linux/input/mt.h>
  10 #include <linux/rmi.h>
  11 #include "rmi_driver.h"
  12 #include "rmi_2d_sensor.h"
  13
  14 enum rmi_f12_object_type {
  15         RMI_F12_OBJECT_NONE                     = 0x00,
  16         RMI_F12_OBJECT_FINGER                   = 0x01,
  17         RMI_F12_OBJECT_STYLUS                   = 0x02,
  18         RMI_F12_OBJECT_PALM                     = 0x03,
  19         RMI_F12_OBJECT_UNCLASSIFIED             = 0x04,
  20         RMI_F12_OBJECT_GLOVED_FINGER            = 0x06,
  21         RMI_F12_OBJECT_NARROW_OBJECT            = 0x07,
  22         RMI_F12_OBJECT_HAND_EDGE                = 0x08,
  23         RMI_F12_OBJECT_COVER                    = 0x0A,
  24         RMI_F12_OBJECT_STYLUS_2                 = 0x0B,
  25         RMI_F12_OBJECT_ERASER                   = 0x0C,
  26         RMI_F12_OBJECT_SMALL_OBJECT             = 0x0D,
  27 };
  28
  29 #define F12_DATA1_BYTES_PER_OBJ                 8
  30
  31 struct f12_data {
  32         struct rmi_2d_sensor sensor;
  33         struct rmi_2d_sensor_platform_data sensor_pdata;
  34         bool has_dribble;
  35
  36         u16 data_addr;
  37
  38         struct rmi_register_descriptor query_reg_desc;
  39         struct rmi_register_descriptor control_reg_desc;
  40         struct rmi_register_descriptor data_reg_desc;
  41
  42         /* F12 Data1 describes sensed objects */
  43         const struct rmi_register_desc_item *data1;
  44         u16 data1_offset;
  45
  46         /* F12 Data5 describes finger ACM */
  47         const struct rmi_register_desc_item *data5;
  48         u16 data5_offset;
  49
  50         /* F12 Data5 describes Pen */
  51         const struct rmi_register_desc_item *data6;
  52         u16 data6_offset;
  53
  54
  55         /* F12 Data9 reports relative data */
  56         const struct rmi_register_desc_item *data9;
  57         u16 data9_offset;
  58
  59         const struct rmi_register_desc_item *data15;
  60         u16 data15_offset;
  61 };
  62
  63 static int rmi_f12_read_sensor_tuning(struct f12_data *f12)
  64 {
  65         const struct rmi_register_desc_item *item;
  66         struct rmi_2d_sensor *sensor = &f12->sensor;
  67         struct rmi_function *fn = sensor->fn;
  68         struct rmi_device *rmi_dev = fn->rmi_dev;
  69         int ret;
  70         int offset;
  71         u8 buf[15];
  72         int pitch_x = 0;
  73         int pitch_y = 0;
  74         int rx_receivers = 0;
  75         int tx_receivers = 0;
  76         int sensor_flags = 0;
  77
  78         item = rmi_get_register_desc_item(&f12->control_reg_desc, 8);
  79         if (!item) {
  80                 dev_err(&fn->dev,
  81                         "F12 does not have the sensor tuning control register\n");
  82                 return -ENODEV;
  83         }
  84
  85         offset = rmi_register_desc_calc_reg_offset(&f12->control_reg_desc, 8);
  86
  87         if (item->reg_size > sizeof(buf)) {
  88                 dev_err(&fn->dev,
  89                         "F12 control8 should be no bigger than %zd bytes, not: %ld\n",
  90                         sizeof(buf), item->reg_size);
  91                 return -ENODEV;
  92         }
  93
  94         ret = rmi_read_block(rmi_dev, fn->fd.control_base_addr + offset, buf,
  95                                 item->reg_size);
  96         if (ret)
  97                 return ret;
  98
  99         offset = 0;
 100         if (rmi_register_desc_has_subpacket(item, 0)) {
 101                 sensor->max_x = (buf[offset + 1] << 8) | buf[offset];
 102                 sensor->max_y = (buf[offset + 3] << 8) | buf[offset + 2];
 103                 offset += 4;
 104         }
 105
 106         rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: max_x: %d max_y: %d\n", __func__,
 107                 sensor->max_x, sensor->max_y);
 108
 109         if (rmi_register_desc_has_subpacket(item, 1)) {
 110                 pitch_x = (buf[offset + 1] << 8) | buf[offset];
 111                 pitch_y = (buf[offset + 3] << 8) | buf[offset + 2];
 112                 offset += 4;
 113         }
 114
 115         if (rmi_register_desc_has_subpacket(item, 2)) {
 116                 /* Units 1/128 sensor pitch */
 117                 rmi_dbg(RMI_DEBUG_FN, &fn->dev,
 118                         "%s: Inactive Border xlo:%d xhi:%d ylo:%d yhi:%d\n",
 119                         __func__,
 120                         buf[offset], buf[offset + 1],
 121                         buf[offset + 2], buf[offset + 3]);
 122
 123                 offset += 4;
 124         }
 125
 126         if (rmi_register_desc_has_subpacket(item, 3)) {
 127                 rx_receivers = buf[offset];
 128                 tx_receivers = buf[offset + 1];
 129                 offset += 2;
 130         }
 131
 132         if (rmi_register_desc_has_subpacket(item, 4)) {
 133                 sensor_flags = buf[offset];
 134                 offset += 1;
 135         }
 136
 137         sensor->x_mm = (pitch_x * rx_receivers) >> 12;
 138         sensor->y_mm = (pitch_y * tx_receivers) >> 12;
 139
 140         rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: x_mm: %d y_mm: %d\n", __func__,
 141                 sensor->x_mm, sensor->y_mm);
 142
 143         return 0;
 144 }
 145
 146 static void rmi_f12_process_objects(struct f12_data *f12, u8 *data1, int size)
 147 {
 148         int i;
 149         struct rmi_2d_sensor *sensor = &f12->sensor;
 150         int objects = f12->data1->num_subpackets;
 151
 152         if ((f12->data1->num_subpackets * F12_DATA1_BYTES_PER_OBJ) > size)
 153                 objects = size / F12_DATA1_BYTES_PER_OBJ;
 154
 155         for (i = 0; i < objects; i++) {
 156                 struct rmi_2d_sensor_abs_object *obj = &sensor->objs[i];
 157
 158                 obj->type = RMI_2D_OBJECT_NONE;
 159                 obj->mt_tool = MT_TOOL_FINGER;
 160
 161                 switch (data1[0]) {
 162                 case RMI_F12_OBJECT_FINGER:
 163                         obj->type = RMI_2D_OBJECT_FINGER;
 164                         break;
 165                 case RMI_F12_OBJECT_STYLUS:
 166                         obj->type = RMI_2D_OBJECT_STYLUS;
 167                         obj->mt_tool = MT_TOOL_PEN;
 168                         break;
 169                 case RMI_F12_OBJECT_PALM:
 170                         obj->type = RMI_2D_OBJECT_PALM;
 171                         obj->mt_tool = MT_TOOL_PALM;
 172                         break;
 173                 case RMI_F12_OBJECT_UNCLASSIFIED:
 174                         obj->type = RMI_2D_OBJECT_UNCLASSIFIED;
 175                         break;
 176                 }
 177
 178                 obj->x = (data1[2] << 8) | data1[1];
 179                 obj->y = (data1[4] << 8) | data1[3];
 180                 obj->z = data1[5];
 181                 obj->wx = data1[6];
 182                 obj->wy = data1[7];
 183
 184                 rmi_2d_sensor_abs_process(sensor, obj, i);
 185
 186                 data1 += F12_DATA1_BYTES_PER_OBJ;
 187         }
 188
 189         if (sensor->kernel_tracking)
 190                 input_mt_assign_slots(sensor->input,
 191                                       sensor->tracking_slots,
 192                                       sensor->tracking_pos,
 193                                       sensor->nbr_fingers,
 194                                       sensor->dmax);
 195
 196         for (i = 0; i < objects; i++)
 197                 rmi_2d_sensor_abs_report(sensor, &sensor->objs[i], i);
 198 }
 199
 200 static irqreturn_t rmi_f12_attention(int irq, void *ctx)
 201 {
 202         int retval;
 203         struct rmi_function *fn = ctx;
 204         struct rmi_device *rmi_dev = fn->rmi_dev;
 205         struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
 206         struct f12_data *f12 = dev_get_drvdata(&fn->dev);
 207         struct rmi_2d_sensor *sensor = &f12->sensor;
 208         int valid_bytes = sensor->pkt_size;
 209
 210         if (drvdata->attn_data.data) {
 211                 if (sensor->attn_size > drvdata->attn_data.size)
 212                         valid_bytes = drvdata->attn_data.size;
 213                 else
 214                         valid_bytes = sensor->attn_size;
 215                 memcpy(sensor->data_pkt, drvdata->attn_data.data,
 216                         valid_bytes);
 217                 drvdata->attn_data.data += sensor->attn_size;
 218                 drvdata->attn_data.size -= sensor->attn_size;
 219         } else {
 220                 retval = rmi_read_block(rmi_dev, f12->data_addr,
 221                                         sensor->data_pkt, sensor->pkt_size);
 222                 if (retval < 0) {
 223                         dev_err(&fn->dev, "Failed to read object data. Code: %d.\n",
 224                                 retval);
 225                         return IRQ_RETVAL(retval);
 226                 }
 227         }
 228
 229         if (f12->data1)
 230                 rmi_f12_process_objects(f12,
 231                         &sensor->data_pkt[f12->data1_offset], valid_bytes);
 232
 233         input_mt_sync_frame(sensor->input);
 234
 235         return IRQ_HANDLED;
 236 }
 237
 238 static int rmi_f12_write_control_regs(struct rmi_function *fn)
 239 {
 240         int ret;
 241         const struct rmi_register_desc_item *item;
 242         struct rmi_device *rmi_dev = fn->rmi_dev;
 243         struct f12_data *f12 = dev_get_drvdata(&fn->dev);
 244         int control_size;
 245         char buf[3];
 246         u16 control_offset = 0;
 247         u8 subpacket_offset = 0;
 248
 249         if (f12->has_dribble
 250             && (f12->sensor.dribble != RMI_REG_STATE_DEFAULT)) {
 251                 item = rmi_get_register_desc_item(&f12->control_reg_desc, 20);
 252                 if (item) {
 253                         control_offset = rmi_register_desc_calc_reg_offset(
 254                                                 &f12->control_reg_desc, 20);
 255
 256                         /*
 257                          * The byte containing the EnableDribble bit will be
 258                          * in either byte 0 or byte 2 of control 20. Depending
 259                          * on the existence of subpacket 0. If control 20 is
 260                          * larger then 3 bytes, just read the first 3.
 261                          */
 262                         control_size = min(item->reg_size, 3UL);
 263
 264                         ret = rmi_read_block(rmi_dev, fn->fd.control_base_addr
 265                                         + control_offset, buf, control_size);
 266                         if (ret)
 267                                 return ret;
 268
 269                         if (rmi_register_desc_has_subpacket(item, 0))
 270                                 subpacket_offset += 1;
 271
 272                         switch (f12->sensor.dribble) {
 273                         case RMI_REG_STATE_OFF:
 274                                 buf[subpacket_offset] &= ~BIT(2);
 275                                 break;
 276                         case RMI_REG_STATE_ON:
 277                                 buf[subpacket_offset] |= BIT(2);
 278                                 break;
 279                         case RMI_REG_STATE_DEFAULT:
 280                         default:
 281                                 break;
 282                         }
 283
 284                         ret = rmi_write_block(rmi_dev,
 285                                 fn->fd.control_base_addr + control_offset,
 286                                 buf, control_size);
 287                         if (ret)
 288                                 return ret;
 289                 }
 290         }
 291
 292         return 0;
 293
 294 }
 295
 296 static int rmi_f12_config(struct rmi_function *fn)
 297 {
 298         struct rmi_driver *drv = fn->rmi_dev->driver;
 299         int ret;
 300
 301         drv->set_irq_bits(fn->rmi_dev, fn->irq_mask);
 302
 303         ret = rmi_f12_write_control_regs(fn);
 304         if (ret)
 305                 dev_warn(&fn->dev,
 306                         "Failed to write F12 control registers: %d\n", ret);
 307
 308         return 0;
 309 }
 310
 311 static int rmi_f12_probe(struct rmi_function *fn)
 312 {
 313         struct f12_data *f12;
 314         int ret;
 315         struct rmi_device *rmi_dev = fn->rmi_dev;
 316         char buf;
 317         u16 query_addr = fn->fd.query_base_addr;
 318         const struct rmi_register_desc_item *item;
 319         struct rmi_2d_sensor *sensor;
 320         struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
 321         struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
 322         u16 data_offset = 0;
 323
 324         rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s\n", __func__);
 325
 326         ret = rmi_read(fn->rmi_dev, query_addr, &buf);
 327         if (ret < 0) {
 328                 dev_err(&fn->dev, "Failed to read general info register: %d\n",
 329                         ret);
 330                 return -ENODEV;
 331         }
 332         ++query_addr;
 333
 334         if (!(buf & BIT(0))) {
 335                 dev_err(&fn->dev,
 336                         "Behavior of F12 without register descriptors is undefined.\n");
 337                 return -ENODEV;
 338         }
 339
 340         f12 = devm_kzalloc(&fn->dev, sizeof(struct f12_data), GFP_KERNEL);
 341         if (!f12)
 342                 return -ENOMEM;
 343
 344         f12->has_dribble = !!(buf & BIT(3));
 345
 346         if (fn->dev.of_node) {
 347                 ret = rmi_2d_sensor_of_probe(&fn->dev, &f12->sensor_pdata);
 348                 if (ret)
 349                         return ret;
 350         } else {
 351                 f12->sensor_pdata = pdata->sensor_pdata;
 352         }
 353
 354         ret = rmi_read_register_desc(rmi_dev, query_addr,
 355                                         &f12->query_reg_desc);
 356         if (ret) {
 357                 dev_err(&fn->dev,
 358                         "Failed to read the Query Register Descriptor: %d\n",
 359                         ret);
 360                 return ret;
 361         }
 362         query_addr += 3;
 363
 364         ret = rmi_read_register_desc(rmi_dev, query_addr,
 365                                                 &f12->control_reg_desc);
 366         if (ret) {
 367                 dev_err(&fn->dev,
 368                         "Failed to read the Control Register Descriptor: %d\n",
 369                         ret);
 370                 return ret;
 371         }
 372         query_addr += 3;
 373
 374         ret = rmi_read_register_desc(rmi_dev, query_addr,
 375                                                 &f12->data_reg_desc);
 376         if (ret) {
 377                 dev_err(&fn->dev,
 378                         "Failed to read the Data Register Descriptor: %d\n",
 379                         ret);
 380                 return ret;
 381         }
 382         query_addr += 3;
 383
 384         sensor = &f12->sensor;
 385         sensor->fn = fn;
 386         f12->data_addr = fn->fd.data_base_addr;
 387         sensor->pkt_size = rmi_register_desc_calc_size(&f12->data_reg_desc);
 388
 389         sensor->axis_align =
 390                 f12->sensor_pdata.axis_align;
 391
 392         sensor->x_mm = f12->sensor_pdata.x_mm;
 393         sensor->y_mm = f12->sensor_pdata.y_mm;
 394         sensor->dribble = f12->sensor_pdata.dribble;
 395
 396         if (sensor->sensor_type == rmi_sensor_default)
 397                 sensor->sensor_type =
 398                         f12->sensor_pdata.sensor_type;
 399
 400         rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: data packet size: %d\n", __func__,
 401                 sensor->pkt_size);
 402         sensor->data_pkt = devm_kzalloc(&fn->dev, sensor->pkt_size, GFP_KERNEL);
 403         if (!sensor->data_pkt)
 404                 return -ENOMEM;
 405
 406         dev_set_drvdata(&fn->dev, f12);
 407
 408         ret = rmi_f12_read_sensor_tuning(f12);
 409         if (ret)
 410                 return ret;
 411
 412         /*
 413          * Figure out what data is contained in the data registers. HID devices
 414          * may have registers defined, but their data is not reported in the
 415          * HID attention report. Registers which are not reported in the HID
 416          * attention report check to see if the device is receiving data from
 417          * HID attention reports.
 418          */
 419         item = rmi_get_register_desc_item(&f12->data_reg_desc, 0);
 420         if (item && !drvdata->attn_data.data)
 421                 data_offset += item->reg_size;
 422
 423         item = rmi_get_register_desc_item(&f12->data_reg_desc, 1);
 424         if (item) {
 425                 f12->data1 = item;
 426                 f12->data1_offset = data_offset;
 427                 data_offset += item->reg_size;
 428                 sensor->nbr_fingers = item->num_subpackets;
 429                 sensor->report_abs = 1;
 430                 sensor->attn_size += item->reg_size;
 431         }
 432
 433         item = rmi_get_register_desc_item(&f12->data_reg_desc, 2);
 434         if (item && !drvdata->attn_data.data)
 435                 data_offset += item->reg_size;
 436
 437         item = rmi_get_register_desc_item(&f12->data_reg_desc, 3);
 438         if (item && !drvdata->attn_data.data)
 439                 data_offset += item->reg_size;
 440
 441         item = rmi_get_register_desc_item(&f12->data_reg_desc, 4);
 442         if (item && !drvdata->attn_data.data)
 443                 data_offset += item->reg_size;
 444
 445         item = rmi_get_register_desc_item(&f12->data_reg_desc, 5);
 446         if (item) {
 447                 f12->data5 = item;
 448                 f12->data5_offset = data_offset;
 449                 data_offset += item->reg_size;
 450                 sensor->attn_size += item->reg_size;
 451         }
 452
 453         item = rmi_get_register_desc_item(&f12->data_reg_desc, 6);
 454         if (item && !drvdata->attn_data.data) {
 455                 f12->data6 = item;
 456                 f12->data6_offset = data_offset;
 457                 data_offset += item->reg_size;
 458         }
 459
 460         item = rmi_get_register_desc_item(&f12->data_reg_desc, 7);
 461         if (item && !drvdata->attn_data.data)
 462                 data_offset += item->reg_size;
 463
 464         item = rmi_get_register_desc_item(&f12->data_reg_desc, 8);
 465         if (item && !drvdata->attn_data.data)
 466                 data_offset += item->reg_size;
 467
 468         item = rmi_get_register_desc_item(&f12->data_reg_desc, 9);
 469         if (item && !drvdata->attn_data.data) {
 470                 f12->data9 = item;
 471                 f12->data9_offset = data_offset;
 472                 data_offset += item->reg_size;
 473                 if (!sensor->report_abs)
 474                         sensor->report_rel = 1;
 475         }
 476
 477         item = rmi_get_register_desc_item(&f12->data_reg_desc, 10);
 478         if (item && !drvdata->attn_data.data)
 479                 data_offset += item->reg_size;
 480
 481         item = rmi_get_register_desc_item(&f12->data_reg_desc, 11);
 482         if (item && !drvdata->attn_data.data)
 483                 data_offset += item->reg_size;
 484
 485         item = rmi_get_register_desc_item(&f12->data_reg_desc, 12);
 486         if (item && !drvdata->attn_data.data)
 487                 data_offset += item->reg_size;
 488
 489         item = rmi_get_register_desc_item(&f12->data_reg_desc, 13);
 490         if (item && !drvdata->attn_data.data)
 491                 data_offset += item->reg_size;
 492
 493         item = rmi_get_register_desc_item(&f12->data_reg_desc, 14);
 494         if (item && !drvdata->attn_data.data)
 495                 data_offset += item->reg_size;
 496
 497         item = rmi_get_register_desc_item(&f12->data_reg_desc, 15);
 498         if (item && !drvdata->attn_data.data) {
 499                 f12->data15 = item;
 500                 f12->data15_offset = data_offset;
 501                 data_offset += item->reg_size;
 502         }
 503
 504         /* allocate the in-kernel tracking buffers */
 505         sensor->tracking_pos = devm_kcalloc(&fn->dev,
 506                         sensor->nbr_fingers, sizeof(struct input_mt_pos),
 507                         GFP_KERNEL);
 508         sensor->tracking_slots = devm_kcalloc(&fn->dev,
 509                         sensor->nbr_fingers, sizeof(int), GFP_KERNEL);
 510         sensor->objs = devm_kcalloc(&fn->dev,
 511                         sensor->nbr_fingers,
 512                         sizeof(struct rmi_2d_sensor_abs_object),
 513                         GFP_KERNEL);
 514         if (!sensor->tracking_pos || !sensor->tracking_slots || !sensor->objs)
 515                 return -ENOMEM;
 516
 517         ret = rmi_2d_sensor_configure_input(fn, sensor);
 518         if (ret)
 519                 return ret;
 520
 521         return 0;
 522 }
 523
 524 struct rmi_function_handler rmi_f12_handler = {
 525         .driver = {
 526                 .name = "rmi4_f12",
 527         },
 528         .func = 0x12,
 529         .probe = rmi_f12_probe,
 530         .config = rmi_f12_config,
 531         .attention = rmi_f12_attention,
 532 };