Linux 5.1.15
[linux/fpc-iii.git] / drivers / input / touchscreen / mtouch.c
blob8278a9058640c1135e8111dfb2248232a0474545
1 /*
2 * MicroTouch (3M) serial touchscreen driver
4 * Copyright (c) 2004 Vojtech Pavlik
5 */
7 /*
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License version 2 as published by
10 * the Free Software Foundation.
14 * 2005/02/19 Dan Streetman <ddstreet@ieee.org>
15 * Copied elo.c and edited for MicroTouch protocol
18 #include <linux/errno.h>
19 #include <linux/kernel.h>
20 #include <linux/module.h>
21 #include <linux/slab.h>
22 #include <linux/input.h>
23 #include <linux/serio.h>
25 #define DRIVER_DESC "MicroTouch serial touchscreen driver"
27 MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
28 MODULE_DESCRIPTION(DRIVER_DESC);
29 MODULE_LICENSE("GPL");
32 * Definitions & global arrays.
35 #define MTOUCH_FORMAT_TABLET_STATUS_BIT 0x80
36 #define MTOUCH_FORMAT_TABLET_TOUCH_BIT 0x40
37 #define MTOUCH_FORMAT_TABLET_LENGTH 5
38 #define MTOUCH_RESPONSE_BEGIN_BYTE 0x01
39 #define MTOUCH_RESPONSE_END_BYTE 0x0d
41 /* todo: check specs for max length of all responses */
42 #define MTOUCH_MAX_LENGTH 16
44 #define MTOUCH_MIN_XC 0
45 #define MTOUCH_MAX_XC 0x3fff
46 #define MTOUCH_MIN_YC 0
47 #define MTOUCH_MAX_YC 0x3fff
49 #define MTOUCH_GET_XC(data) (((data[2])<<7) | data[1])
50 #define MTOUCH_GET_YC(data) (((data[4])<<7) | data[3])
51 #define MTOUCH_GET_TOUCHED(data) (MTOUCH_FORMAT_TABLET_TOUCH_BIT & data[0])
54 * Per-touchscreen data.
57 struct mtouch {
58 struct input_dev *dev;
59 struct serio *serio;
60 int idx;
61 unsigned char data[MTOUCH_MAX_LENGTH];
62 char phys[32];
65 static void mtouch_process_format_tablet(struct mtouch *mtouch)
67 struct input_dev *dev = mtouch->dev;
69 if (MTOUCH_FORMAT_TABLET_LENGTH == ++mtouch->idx) {
70 input_report_abs(dev, ABS_X, MTOUCH_GET_XC(mtouch->data));
71 input_report_abs(dev, ABS_Y, MTOUCH_MAX_YC - MTOUCH_GET_YC(mtouch->data));
72 input_report_key(dev, BTN_TOUCH, MTOUCH_GET_TOUCHED(mtouch->data));
73 input_sync(dev);
75 mtouch->idx = 0;
79 static void mtouch_process_response(struct mtouch *mtouch)
81 if (MTOUCH_RESPONSE_END_BYTE == mtouch->data[mtouch->idx++]) {
82 /* FIXME - process response */
83 mtouch->idx = 0;
84 } else if (MTOUCH_MAX_LENGTH == mtouch->idx) {
85 printk(KERN_ERR "mtouch.c: too many response bytes\n");
86 mtouch->idx = 0;
90 static irqreturn_t mtouch_interrupt(struct serio *serio,
91 unsigned char data, unsigned int flags)
93 struct mtouch *mtouch = serio_get_drvdata(serio);
95 mtouch->data[mtouch->idx] = data;
97 if (MTOUCH_FORMAT_TABLET_STATUS_BIT & mtouch->data[0])
98 mtouch_process_format_tablet(mtouch);
99 else if (MTOUCH_RESPONSE_BEGIN_BYTE == mtouch->data[0])
100 mtouch_process_response(mtouch);
101 else
102 printk(KERN_DEBUG "mtouch.c: unknown/unsynchronized data from device, byte %x\n",mtouch->data[0]);
104 return IRQ_HANDLED;
108 * mtouch_disconnect() is the opposite of mtouch_connect()
111 static void mtouch_disconnect(struct serio *serio)
113 struct mtouch *mtouch = serio_get_drvdata(serio);
115 input_get_device(mtouch->dev);
116 input_unregister_device(mtouch->dev);
117 serio_close(serio);
118 serio_set_drvdata(serio, NULL);
119 input_put_device(mtouch->dev);
120 kfree(mtouch);
124 * mtouch_connect() is the routine that is called when someone adds a
125 * new serio device that supports MicroTouch (Format Tablet) protocol and registers it as
126 * an input device.
129 static int mtouch_connect(struct serio *serio, struct serio_driver *drv)
131 struct mtouch *mtouch;
132 struct input_dev *input_dev;
133 int err;
135 mtouch = kzalloc(sizeof(struct mtouch), GFP_KERNEL);
136 input_dev = input_allocate_device();
137 if (!mtouch || !input_dev) {
138 err = -ENOMEM;
139 goto fail1;
142 mtouch->serio = serio;
143 mtouch->dev = input_dev;
144 snprintf(mtouch->phys, sizeof(mtouch->phys), "%s/input0", serio->phys);
146 input_dev->name = "MicroTouch Serial TouchScreen";
147 input_dev->phys = mtouch->phys;
148 input_dev->id.bustype = BUS_RS232;
149 input_dev->id.vendor = SERIO_MICROTOUCH;
150 input_dev->id.product = 0;
151 input_dev->id.version = 0x0100;
152 input_dev->dev.parent = &serio->dev;
153 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
154 input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
155 input_set_abs_params(mtouch->dev, ABS_X, MTOUCH_MIN_XC, MTOUCH_MAX_XC, 0, 0);
156 input_set_abs_params(mtouch->dev, ABS_Y, MTOUCH_MIN_YC, MTOUCH_MAX_YC, 0, 0);
158 serio_set_drvdata(serio, mtouch);
160 err = serio_open(serio, drv);
161 if (err)
162 goto fail2;
164 err = input_register_device(mtouch->dev);
165 if (err)
166 goto fail3;
168 return 0;
170 fail3: serio_close(serio);
171 fail2: serio_set_drvdata(serio, NULL);
172 fail1: input_free_device(input_dev);
173 kfree(mtouch);
174 return err;
178 * The serio driver structure.
181 static const struct serio_device_id mtouch_serio_ids[] = {
183 .type = SERIO_RS232,
184 .proto = SERIO_MICROTOUCH,
185 .id = SERIO_ANY,
186 .extra = SERIO_ANY,
188 { 0 }
191 MODULE_DEVICE_TABLE(serio, mtouch_serio_ids);
193 static struct serio_driver mtouch_drv = {
194 .driver = {
195 .name = "mtouch",
197 .description = DRIVER_DESC,
198 .id_table = mtouch_serio_ids,
199 .interrupt = mtouch_interrupt,
200 .connect = mtouch_connect,
201 .disconnect = mtouch_disconnect,
204 module_serio_driver(mtouch_drv);