?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 5.1.15
[linux/fpc-iii.git] / drivers / scsi / pmcraid.h
blob754ef30927e2a89f9ce2aa95e848b2c46ed60167
1 /*
2 * pmcraid.h -- PMC Sierra MaxRAID controller driver header file
3 *
4 * Written By: Anil Ravindranath<anil_ravindranath@pmc-sierra.com>
5 * PMC-Sierra Inc
6 *
7 * Copyright (C) 2008, 2009 PMC Sierra Inc.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 */
23
24 #ifndef _PMCRAID_H
25 #define _PMCRAID_H
26
27 #include <linux/types.h>
28 #include <linux/completion.h>
29 #include <linux/list.h>
30 #include <scsi/scsi.h>
31 #include <scsi/scsi_cmnd.h>
32 #include <linux/cdev.h>
33 #include <net/netlink.h>
34 #include <net/genetlink.h>
35 #include <linux/connector.h>
36 /*
37 * Driver name : string representing the driver name
38 * Device file : /dev file to be used for management interfaces
39 * Driver version: version string in major_version.minor_version.patch format
40 * Driver date : date information in "Mon dd yyyy" format
41 */
42 #define PMCRAID_DRIVER_NAME "PMC MaxRAID"
43 #define PMCRAID_DEVFILE "pmcsas"
44 #define PMCRAID_DRIVER_VERSION "1.0.3"
45
46 #define PMCRAID_FW_VERSION_1 0x002
47
48 /* Maximum number of adapters supported by current version of the driver */
49 #define PMCRAID_MAX_ADAPTERS 1024
50
51 /* Bit definitions as per firmware, bit position [0][1][2].....[31] */
52 #define PMC_BIT8(n) (1 << (7-n))
53 #define PMC_BIT16(n) (1 << (15-n))
54 #define PMC_BIT32(n) (1 << (31-n))
55
56 /* PMC PCI vendor ID and device ID values */
57 #define PCI_VENDOR_ID_PMC 0x11F8
58 #define PCI_DEVICE_ID_PMC_MAXRAID 0x5220
59
60 /*
61 * MAX_CMD : maximum commands that can be outstanding with IOA
62 * MAX_IO_CMD : command blocks available for IO commands
63 * MAX_HCAM_CMD : command blocks avaibale for HCAMS
64 * MAX_INTERNAL_CMD : command blocks avaible for internal commands like reset
65 */
66 #define PMCRAID_MAX_CMD 1024
67 #define PMCRAID_MAX_IO_CMD 1020
68 #define PMCRAID_MAX_HCAM_CMD 2
69 #define PMCRAID_MAX_INTERNAL_CMD 2
70
71 /* MAX_IOADLS : max number of scatter-gather lists supported by IOA
72 * IOADLS_INTERNAL : number of ioadls included as part of IOARCB.
73 * IOADLS_EXTERNAL : number of ioadls allocated external to IOARCB
74 */
75 #define PMCRAID_IOADLS_INTERNAL 27
76 #define PMCRAID_IOADLS_EXTERNAL 37
77 #define PMCRAID_MAX_IOADLS PMCRAID_IOADLS_INTERNAL
78
79 /* HRRQ_ENTRY_SIZE : size of hrrq buffer
80 * IOARCB_ALIGNMENT : alignment required for IOARCB
81 * IOADL_ALIGNMENT : alignment requirement for IOADLs
82 * MSIX_VECTORS : number of MSIX vectors supported
83 */
84 #define HRRQ_ENTRY_SIZE sizeof(__le32)
85 #define PMCRAID_IOARCB_ALIGNMENT 32
86 #define PMCRAID_IOADL_ALIGNMENT 16
87 #define PMCRAID_IOASA_ALIGNMENT 4
88 #define PMCRAID_NUM_MSIX_VECTORS 16
89
90 /* various other limits */
91 #define PMCRAID_VENDOR_ID_LEN 8
92 #define PMCRAID_PRODUCT_ID_LEN 16
93 #define PMCRAID_SERIAL_NUM_LEN 8
94 #define PMCRAID_LUN_LEN 8
95 #define PMCRAID_MAX_CDB_LEN 16
96 #define PMCRAID_DEVICE_ID_LEN 8
97 #define PMCRAID_SENSE_DATA_LEN 256
98 #define PMCRAID_ADD_CMD_PARAM_LEN 48
99
100 #define PMCRAID_MAX_BUS_TO_SCAN 1
101 #define PMCRAID_MAX_NUM_TARGETS_PER_BUS 256
102 #define PMCRAID_MAX_NUM_LUNS_PER_TARGET 8
103
104 /* IOA bus/target/lun number of IOA resources */
105 #define PMCRAID_IOA_BUS_ID 0xfe
106 #define PMCRAID_IOA_TARGET_ID 0xff
107 #define PMCRAID_IOA_LUN_ID 0xff
108 #define PMCRAID_VSET_BUS_ID 0x1
109 #define PMCRAID_VSET_LUN_ID 0x0
110 #define PMCRAID_PHYS_BUS_ID 0x0
111 #define PMCRAID_VIRTUAL_ENCL_BUS_ID 0x8
112 #define PMCRAID_MAX_VSET_TARGETS 0x7F
113 #define PMCRAID_MAX_VSET_LUNS_PER_TARGET 8
114
115 #define PMCRAID_IOA_MAX_SECTORS 32767
116 #define PMCRAID_VSET_MAX_SECTORS 512
117 #define PMCRAID_MAX_CMD_PER_LUN 254
118
119 /* Number of configuration table entries (resources), includes 1 FP,
120 * 1 Enclosure device
121 */
122 #define PMCRAID_MAX_RESOURCES 256
123
124 /* Adapter Commands used by driver */
125 #define PMCRAID_QUERY_RESOURCE_STATE 0xC2
126 #define PMCRAID_RESET_DEVICE 0xC3
127 /* options to select reset target */
128 #define ENABLE_RESET_MODIFIER 0x80
129 #define RESET_DEVICE_LUN 0x40
130 #define RESET_DEVICE_TARGET 0x20
131 #define RESET_DEVICE_BUS 0x10
132
133 #define PMCRAID_IDENTIFY_HRRQ 0xC4
134 #define PMCRAID_QUERY_IOA_CONFIG 0xC5
135 #define PMCRAID_QUERY_CMD_STATUS 0xCB
136 #define PMCRAID_ABORT_CMD 0xC7
137
138 /* CANCEL ALL command, provides option for setting SYNC_COMPLETE
139 * on the target resources for which commands got cancelled
140 */
141 #define PMCRAID_CANCEL_ALL_REQUESTS 0xCE
142 #define PMCRAID_SYNC_COMPLETE_AFTER_CANCEL PMC_BIT8(0)
143
144 /* HCAM command and types of HCAM supported by IOA */
145 #define PMCRAID_HOST_CONTROLLED_ASYNC 0xCF
146 #define PMCRAID_HCAM_CODE_CONFIG_CHANGE 0x01
147 #define PMCRAID_HCAM_CODE_LOG_DATA 0x02
148
149 /* IOA shutdown command and various shutdown types */
150 #define PMCRAID_IOA_SHUTDOWN 0xF7
151 #define PMCRAID_SHUTDOWN_NORMAL 0x00
152 #define PMCRAID_SHUTDOWN_PREPARE_FOR_NORMAL 0x40
153 #define PMCRAID_SHUTDOWN_NONE 0x100
154 #define PMCRAID_SHUTDOWN_ABBREV 0x80
155
156 /* SET SUPPORTED DEVICES command and the option to select all the
157 * devices to be supported
158 */
159 #define PMCRAID_SET_SUPPORTED_DEVICES 0xFB
160 #define ALL_DEVICES_SUPPORTED PMC_BIT8(0)
161
162 /* This option is used with SCSI WRITE_BUFFER command */
163 #define PMCRAID_WR_BUF_DOWNLOAD_AND_SAVE 0x05
164
165 /* IOASC Codes used by driver */
166 #define PMCRAID_IOASC_SENSE_MASK 0xFFFFFF00
167 #define PMCRAID_IOASC_SENSE_KEY(ioasc) ((ioasc) >> 24)
168 #define PMCRAID_IOASC_SENSE_CODE(ioasc) (((ioasc) & 0x00ff0000) >> 16)
169 #define PMCRAID_IOASC_SENSE_QUAL(ioasc) (((ioasc) & 0x0000ff00) >> 8)
170 #define PMCRAID_IOASC_SENSE_STATUS(ioasc) ((ioasc) & 0x000000ff)
171
172 #define PMCRAID_IOASC_GOOD_COMPLETION 0x00000000
173 #define PMCRAID_IOASC_GC_IOARCB_NOTFOUND 0x005A0000
174 #define PMCRAID_IOASC_NR_INIT_CMD_REQUIRED 0x02040200
175 #define PMCRAID_IOASC_NR_IOA_RESET_REQUIRED 0x02048000
176 #define PMCRAID_IOASC_NR_SYNC_REQUIRED 0x023F0000
177 #define PMCRAID_IOASC_ME_READ_ERROR_NO_REALLOC 0x03110C00
178 #define PMCRAID_IOASC_HW_CANNOT_COMMUNICATE 0x04050000
179 #define PMCRAID_IOASC_HW_DEVICE_TIMEOUT 0x04080100
180 #define PMCRAID_IOASC_HW_DEVICE_BUS_STATUS_ERROR 0x04448500
181 #define PMCRAID_IOASC_HW_IOA_RESET_REQUIRED 0x04448600
182 #define PMCRAID_IOASC_IR_INVALID_RESOURCE_HANDLE 0x05250000
183 #define PMCRAID_IOASC_AC_TERMINATED_BY_HOST 0x0B5A0000
184 #define PMCRAID_IOASC_UA_BUS_WAS_RESET 0x06290000
185 #define PMCRAID_IOASC_TIME_STAMP_OUT_OF_SYNC 0x06908B00
186 #define PMCRAID_IOASC_UA_BUS_WAS_RESET_BY_OTHER 0x06298000
187
188 /* Driver defined IOASCs */
189 #define PMCRAID_IOASC_IOA_WAS_RESET 0x10000001
190 #define PMCRAID_IOASC_PCI_ACCESS_ERROR 0x10000002
191
192 /* Various timeout values (in milliseconds) used. If any of these are chip
193 * specific, move them to pmcraid_chip_details structure.
194 */
195 #define PMCRAID_PCI_DEASSERT_TIMEOUT 2000
196 #define PMCRAID_BIST_TIMEOUT 2000
197 #define PMCRAID_AENWAIT_TIMEOUT 5000
198 #define PMCRAID_TRANSOP_TIMEOUT 60000
199
200 #define PMCRAID_RESET_TIMEOUT (2 * HZ)
201 #define PMCRAID_CHECK_FOR_RESET_TIMEOUT ((HZ / 10))
202 #define PMCRAID_VSET_IO_TIMEOUT (60 * HZ)
203 #define PMCRAID_INTERNAL_TIMEOUT (60 * HZ)
204 #define PMCRAID_SHUTDOWN_TIMEOUT (150 * HZ)
205 #define PMCRAID_RESET_BUS_TIMEOUT (60 * HZ)
206 #define PMCRAID_RESET_HOST_TIMEOUT (150 * HZ)
207 #define PMCRAID_REQUEST_SENSE_TIMEOUT (30 * HZ)
208 #define PMCRAID_SET_SUP_DEV_TIMEOUT (2 * 60 * HZ)
209
210 /* structure to represent a scatter-gather element (IOADL descriptor) */
211 struct pmcraid_ioadl_desc {
212 __le64 address;
213 __le32 data_len;
214 __u8 reserved[3];
215 __u8 flags;
216 } __attribute__((packed, aligned(PMCRAID_IOADL_ALIGNMENT)));
217
218 /* pmcraid_ioadl_desc.flags values */
219 #define IOADL_FLAGS_CHAINED PMC_BIT8(0)
220 #define IOADL_FLAGS_LAST_DESC PMC_BIT8(1)
221 #define IOADL_FLAGS_READ_LAST PMC_BIT8(1)
222 #define IOADL_FLAGS_WRITE_LAST PMC_BIT8(1)
223
224
225 /* additional IOARCB data which can be CDB or additional request parameters
226 * or list of IOADLs. Firmware supports max of 512 bytes for IOARCB, hence then
227 * number of IOADLs are limted to 27. In case they are more than 27, they will
228 * be used in chained form
229 */
230 struct pmcraid_ioarcb_add_data {
231 union {
232 struct pmcraid_ioadl_desc ioadl[PMCRAID_IOADLS_INTERNAL];
233 __u8 add_cmd_params[PMCRAID_ADD_CMD_PARAM_LEN];
234 } u;
235 };
236
237 /*
238 * IOA Request Control Block
239 */
240 struct pmcraid_ioarcb {
241 __le64 ioarcb_bus_addr;
242 __le32 resource_handle;
243 __le32 response_handle;
244 __le64 ioadl_bus_addr;
245 __le32 ioadl_length;
246 __le32 data_transfer_length;
247 __le64 ioasa_bus_addr;
248 __le16 ioasa_len;
249 __le16 cmd_timeout;
250 __le16 add_cmd_param_offset;
251 __le16 add_cmd_param_length;
252 __le32 reserved1[2];
253 __le32 reserved2;
254 __u8 request_type;
255 __u8 request_flags0;
256 __u8 request_flags1;
257 __u8 hrrq_id;
258 __u8 cdb[PMCRAID_MAX_CDB_LEN];
259 struct pmcraid_ioarcb_add_data add_data;
260 } __attribute__((packed, aligned(PMCRAID_IOARCB_ALIGNMENT)));
261
262 /* well known resource handle values */
263 #define PMCRAID_IOA_RES_HANDLE 0xffffffff
264 #define PMCRAID_INVALID_RES_HANDLE 0
265
266 /* pmcraid_ioarcb.request_type values */
267 #define REQ_TYPE_SCSI 0x00
268 #define REQ_TYPE_IOACMD 0x01
269 #define REQ_TYPE_HCAM 0x02
270
271 /* pmcraid_ioarcb.flags0 values */
272 #define TRANSFER_DIR_WRITE PMC_BIT8(0)
273 #define INHIBIT_UL_CHECK PMC_BIT8(2)
274 #define SYNC_OVERRIDE PMC_BIT8(3)
275 #define SYNC_COMPLETE PMC_BIT8(4)
276 #define NO_LINK_DESCS PMC_BIT8(5)
277
278 /* pmcraid_ioarcb.flags1 values */
279 #define DELAY_AFTER_RESET PMC_BIT8(0)
280 #define TASK_TAG_SIMPLE 0x10
281 #define TASK_TAG_ORDERED 0x20
282 #define TASK_TAG_QUEUE_HEAD 0x30
283
284 /* toggle bit offset in response handle */
285 #define HRRQ_TOGGLE_BIT 0x01
286 #define HRRQ_RESPONSE_BIT 0x02
287
288 /* IOA Status Area */
289 struct pmcraid_ioasa_vset {
290 __le32 failing_lba_hi;
291 __le32 failing_lba_lo;
292 __le32 reserved;
293 } __attribute__((packed, aligned(4)));
294
295 struct pmcraid_ioasa {
296 __le32 ioasc;
297 __le16 returned_status_length;
298 __le16 available_status_length;
299 __le32 residual_data_length;
300 __le32 ilid;
301 __le32 fd_ioasc;
302 __le32 fd_res_address;
303 __le32 fd_res_handle;
304 __le32 reserved;
305
306 /* resource specific sense information */
307 union {
308 struct pmcraid_ioasa_vset vset;
309 } u;
310
311 /* IOA autosense data */
312 __le16 auto_sense_length;
313 __le16 error_data_length;
314 __u8 sense_data[PMCRAID_SENSE_DATA_LEN];
315 } __attribute__((packed, aligned(4)));
316
317 #define PMCRAID_DRIVER_ILID 0xffffffff
318
319 /* Config Table Entry per Resource */
320 struct pmcraid_config_table_entry {
321 __u8 resource_type;
322 __u8 bus_protocol;
323 __le16 array_id;
324 __u8 common_flags0;
325 __u8 common_flags1;
326 __u8 unique_flags0;
327 __u8 unique_flags1; /*also used as vset target_id */
328 __le32 resource_handle;
329 __le32 resource_address;
330 __u8 device_id[PMCRAID_DEVICE_ID_LEN];
331 __u8 lun[PMCRAID_LUN_LEN];
332 } __attribute__((packed, aligned(4)));
333
334 /* extended configuration table sizes are also of 32 bytes in size */
335 struct pmcraid_config_table_entry_ext {
336 struct pmcraid_config_table_entry cfgte;
337 };
338
339 /* resource types (config_table_entry.resource_type values) */
340 #define RES_TYPE_AF_DASD 0x00
341 #define RES_TYPE_GSCSI 0x01
342 #define RES_TYPE_VSET 0x02
343 #define RES_TYPE_IOA_FP 0xFF
344
345 #define RES_IS_IOA(res) ((res).resource_type == RES_TYPE_IOA_FP)
346 #define RES_IS_GSCSI(res) ((res).resource_type == RES_TYPE_GSCSI)
347 #define RES_IS_VSET(res) ((res).resource_type == RES_TYPE_VSET)
348 #define RES_IS_AFDASD(res) ((res).resource_type == RES_TYPE_AF_DASD)
349
350 /* bus_protocol values used by driver */
351 #define RES_TYPE_VENCLOSURE 0x8
352
353 /* config_table_entry.common_flags0 */
354 #define MULTIPATH_RESOURCE PMC_BIT32(0)
355
356 /* unique_flags1 */
357 #define IMPORT_MODE_MANUAL PMC_BIT8(0)
358
359 /* well known resource handle values */
360 #define RES_HANDLE_IOA 0xFFFFFFFF
361 #define RES_HANDLE_NONE 0x00000000
362
363 /* well known resource address values */
364 #define RES_ADDRESS_IOAFP 0xFEFFFFFF
365 #define RES_ADDRESS_INVALID 0xFFFFFFFF
366
367 /* BUS/TARGET/LUN values from resource_addrr */
368 #define RES_BUS(res_addr) (le32_to_cpu(res_addr) & 0xFF)
369 #define RES_TARGET(res_addr) ((le32_to_cpu(res_addr) >> 16) & 0xFF)
370 #define RES_LUN(res_addr) 0x0
371
372 /* configuration table structure */
373 struct pmcraid_config_table {
374 __le16 num_entries;
375 __u8 table_format;
376 __u8 reserved1;
377 __u8 flags;
378 __u8 reserved2[11];
379 union {
380 struct pmcraid_config_table_entry
381 entries[PMCRAID_MAX_RESOURCES];
382 struct pmcraid_config_table_entry_ext
383 entries_ext[PMCRAID_MAX_RESOURCES];
384 };
385 } __attribute__((packed, aligned(4)));
386
387 /* config_table.flags value */
388 #define MICROCODE_UPDATE_REQUIRED PMC_BIT32(0)
389
390 /*
391 * HCAM format
392 */
393 #define PMCRAID_HOSTRCB_LDNSIZE 4056
394
395 /* Error log notification format */
396 struct pmcraid_hostrcb_error {
397 __le32 fd_ioasc;
398 __le32 fd_ra;
399 __le32 fd_rh;
400 __le32 prc;
401 union {
402 __u8 data[PMCRAID_HOSTRCB_LDNSIZE];
403 } u;
404 } __attribute__ ((packed, aligned(4)));
405
406 struct pmcraid_hcam_hdr {
407 __u8 op_code;
408 __u8 notification_type;
409 __u8 notification_lost;
410 __u8 flags;
411 __u8 overlay_id;
412 __u8 reserved1[3];
413 __le32 ilid;
414 __le32 timestamp1;
415 __le32 timestamp2;
416 __le32 data_len;
417 } __attribute__((packed, aligned(4)));
418
419 #define PMCRAID_AEN_GROUP 0x3
420
421 struct pmcraid_hcam_ccn {
422 struct pmcraid_hcam_hdr header;
423 struct pmcraid_config_table_entry cfg_entry;
424 struct pmcraid_config_table_entry cfg_entry_old;
425 } __attribute__((packed, aligned(4)));
426
427 #define PMCRAID_CCN_EXT_SIZE 3944
428 struct pmcraid_hcam_ccn_ext {
429 struct pmcraid_hcam_hdr header;
430 struct pmcraid_config_table_entry_ext cfg_entry;
431 struct pmcraid_config_table_entry_ext cfg_entry_old;
432 __u8 reserved[PMCRAID_CCN_EXT_SIZE];
433 } __attribute__((packed, aligned(4)));
434
435 struct pmcraid_hcam_ldn {
436 struct pmcraid_hcam_hdr header;
437 struct pmcraid_hostrcb_error error_log;
438 } __attribute__((packed, aligned(4)));
439
440 /* pmcraid_hcam.op_code values */
441 #define HOSTRCB_TYPE_CCN 0xE1
442 #define HOSTRCB_TYPE_LDN 0xE2
443
444 /* pmcraid_hcam.notification_type values */
445 #define NOTIFICATION_TYPE_ENTRY_CHANGED 0x0
446 #define NOTIFICATION_TYPE_ENTRY_NEW 0x1
447 #define NOTIFICATION_TYPE_ENTRY_DELETED 0x2
448 #define NOTIFICATION_TYPE_STATE_CHANGE 0x3
449 #define NOTIFICATION_TYPE_ENTRY_STATECHANGED 0x4
450 #define NOTIFICATION_TYPE_ERROR_LOG 0x10
451 #define NOTIFICATION_TYPE_INFORMATION_LOG 0x11
452
453 #define HOSTRCB_NOTIFICATIONS_LOST PMC_BIT8(0)
454
455 /* pmcraid_hcam.flags values */
456 #define HOSTRCB_INTERNAL_OP_ERROR PMC_BIT8(0)
457 #define HOSTRCB_ERROR_RESPONSE_SENT PMC_BIT8(1)
458
459 /* pmcraid_hcam.overlay_id values */
460 #define HOSTRCB_OVERLAY_ID_08 0x08
461 #define HOSTRCB_OVERLAY_ID_09 0x09
462 #define HOSTRCB_OVERLAY_ID_11 0x11
463 #define HOSTRCB_OVERLAY_ID_12 0x12
464 #define HOSTRCB_OVERLAY_ID_13 0x13
465 #define HOSTRCB_OVERLAY_ID_14 0x14
466 #define HOSTRCB_OVERLAY_ID_16 0x16
467 #define HOSTRCB_OVERLAY_ID_17 0x17
468 #define HOSTRCB_OVERLAY_ID_20 0x20
469 #define HOSTRCB_OVERLAY_ID_FF 0xFF
470
471 /* Implementation specific card details */
472 struct pmcraid_chip_details {
473 /* hardware register offsets */
474 unsigned long ioastatus;
475 unsigned long ioarrin;
476 unsigned long mailbox;
477 unsigned long global_intr_mask;
478 unsigned long ioa_host_intr;
479 unsigned long ioa_host_msix_intr;
480 unsigned long ioa_host_intr_clr;
481 unsigned long ioa_host_mask;
482 unsigned long ioa_host_mask_clr;
483 unsigned long host_ioa_intr;
484 unsigned long host_ioa_intr_clr;
485
486 /* timeout used during transitional to operational state */
487 unsigned long transop_timeout;
488 };
489
490 /* IOA to HOST doorbells (interrupts) */
491 #define INTRS_TRANSITION_TO_OPERATIONAL PMC_BIT32(0)
492 #define INTRS_IOARCB_TRANSFER_FAILED PMC_BIT32(3)
493 #define INTRS_IOA_UNIT_CHECK PMC_BIT32(4)
494 #define INTRS_NO_HRRQ_FOR_CMD_RESPONSE PMC_BIT32(5)
495 #define INTRS_CRITICAL_OP_IN_PROGRESS PMC_BIT32(6)
496 #define INTRS_IO_DEBUG_ACK PMC_BIT32(7)
497 #define INTRS_IOARRIN_LOST PMC_BIT32(27)
498 #define INTRS_SYSTEM_BUS_MMIO_ERROR PMC_BIT32(28)
499 #define INTRS_IOA_PROCESSOR_ERROR PMC_BIT32(29)
500 #define INTRS_HRRQ_VALID PMC_BIT32(30)
501 #define INTRS_OPERATIONAL_STATUS PMC_BIT32(0)
502 #define INTRS_ALLOW_MSIX_VECTOR0 PMC_BIT32(31)
503
504 /* Host to IOA Doorbells */
505 #define DOORBELL_RUNTIME_RESET PMC_BIT32(1)
506 #define DOORBELL_IOA_RESET_ALERT PMC_BIT32(7)
507 #define DOORBELL_IOA_DEBUG_ALERT PMC_BIT32(9)
508 #define DOORBELL_ENABLE_DESTRUCTIVE_DIAGS PMC_BIT32(8)
509 #define DOORBELL_IOA_START_BIST PMC_BIT32(23)
510 #define DOORBELL_INTR_MODE_MSIX PMC_BIT32(25)
511 #define DOORBELL_INTR_MSIX_CLR PMC_BIT32(26)
512 #define DOORBELL_RESET_IOA PMC_BIT32(31)
513
514 /* Global interrupt mask register value */
515 #define GLOBAL_INTERRUPT_MASK 0x5ULL
516
517 #define PMCRAID_ERROR_INTERRUPTS (INTRS_IOARCB_TRANSFER_FAILED | \
518 INTRS_IOA_UNIT_CHECK | \
519 INTRS_NO_HRRQ_FOR_CMD_RESPONSE | \
520 INTRS_IOARRIN_LOST | \
521 INTRS_SYSTEM_BUS_MMIO_ERROR | \
522 INTRS_IOA_PROCESSOR_ERROR)
523
524 #define PMCRAID_PCI_INTERRUPTS (PMCRAID_ERROR_INTERRUPTS | \
525 INTRS_HRRQ_VALID | \
526 INTRS_TRANSITION_TO_OPERATIONAL |\
527 INTRS_ALLOW_MSIX_VECTOR0)
528
529 /* control_block, associated with each of the commands contains IOARCB, IOADLs
530 * memory for IOASA. Additional 3 * 16 bytes are allocated in order to support
531 * additional request parameters (of max size 48) any command.
532 */
533 struct pmcraid_control_block {
534 struct pmcraid_ioarcb ioarcb;
535 struct pmcraid_ioadl_desc ioadl[PMCRAID_IOADLS_EXTERNAL + 3];
536 struct pmcraid_ioasa ioasa;
537 } __attribute__ ((packed, aligned(PMCRAID_IOARCB_ALIGNMENT)));
538
539 /* pmcraid_sglist - Scatter-gather list allocated for passthrough ioctls
540 */
541 struct pmcraid_sglist {
542 u32 order;
543 u32 num_sg;
544 u32 num_dma_sg;
545 struct scatterlist *scatterlist;
546 };
547
548 /* page D0 inquiry data of focal point resource */
549 struct pmcraid_inquiry_data {
550 __u8 ph_dev_type;
551 __u8 page_code;
552 __u8 reserved1;
553 __u8 add_page_len;
554 __u8 length;
555 __u8 reserved2;
556 __be16 fw_version;
557 __u8 reserved3[16];
558 };
559
560 #define PMCRAID_TIMESTAMP_LEN 12
561 #define PMCRAID_REQ_TM_STR_LEN 6
562 #define PMCRAID_SCSI_SET_TIMESTAMP 0xA4
563 #define PMCRAID_SCSI_SERVICE_ACTION 0x0F
564
565 struct pmcraid_timestamp_data {
566 __u8 reserved1[4];
567 __u8 timestamp[PMCRAID_REQ_TM_STR_LEN]; /* current time value */
568 __u8 reserved2[2];
569 };
570
571 /* pmcraid_cmd - LLD representation of SCSI command */
572 struct pmcraid_cmd {
573
574 /* Ptr and bus address of DMA.able control block for this command */
575 struct pmcraid_control_block *ioa_cb;
576 dma_addr_t ioa_cb_bus_addr;
577 dma_addr_t dma_handle;
578
579 /* pointer to mid layer structure of SCSI commands */
580 struct scsi_cmnd *scsi_cmd;
581
582 struct list_head free_list;
583 struct completion wait_for_completion;
584 struct timer_list timer; /* needed for internal commands */
585 u32 timeout; /* current timeout value */
586 u32 index; /* index into the command list */
587 u8 completion_req; /* for handling internal commands */
588 u8 release; /* for handling completions */
589
590 void (*cmd_done) (struct pmcraid_cmd *);
591 struct pmcraid_instance *drv_inst;
592
593 struct pmcraid_sglist *sglist; /* used for passthrough IOCTLs */
594
595 /* scratch used */
596 union {
597 /* during reset sequence */
598 unsigned long time_left;
599 struct pmcraid_resource_entry *res;
600 int hrrq_index;
601
602 /* used during IO command error handling. Sense buffer
603 * for REQUEST SENSE command if firmware is not sending
604 * auto sense data
605 */
606 struct {
607 u8 *sense_buffer;
608 dma_addr_t sense_buffer_dma;
609 };
610 };
611 };
612
613 /*
614 * Interrupt registers of IOA
615 */
616 struct pmcraid_interrupts {
617 void __iomem *ioa_host_interrupt_reg;
618 void __iomem *ioa_host_msix_interrupt_reg;
619 void __iomem *ioa_host_interrupt_clr_reg;
620 void __iomem *ioa_host_interrupt_mask_reg;
621 void __iomem *ioa_host_interrupt_mask_clr_reg;
622 void __iomem *global_interrupt_mask_reg;
623 void __iomem *host_ioa_interrupt_reg;
624 void __iomem *host_ioa_interrupt_clr_reg;
625 };
626
627 /* ISR parameters LLD allocates (one for each MSI-X if enabled) vectors */
628 struct pmcraid_isr_param {
629 struct pmcraid_instance *drv_inst;
630 u8 hrrq_id; /* hrrq entry index */
631 };
632
633
634 /* AEN message header sent as part of event data to applications */
635 struct pmcraid_aen_msg {
636 u32 hostno;
637 u32 length;
638 u8 reserved[8];
639 u8 data[0];
640 };
641
642 /* Controller state event message type */
643 struct pmcraid_state_msg {
644 struct pmcraid_aen_msg msg;
645 u32 ioa_state;
646 };
647
648 #define PMC_DEVICE_EVENT_RESET_START 0x11000000
649 #define PMC_DEVICE_EVENT_RESET_SUCCESS 0x11000001
650 #define PMC_DEVICE_EVENT_RESET_FAILED 0x11000002
651 #define PMC_DEVICE_EVENT_SHUTDOWN_START 0x11000003
652 #define PMC_DEVICE_EVENT_SHUTDOWN_SUCCESS 0x11000004
653 #define PMC_DEVICE_EVENT_SHUTDOWN_FAILED 0x11000005
654
655 struct pmcraid_hostrcb {
656 struct pmcraid_instance *drv_inst;
657 struct pmcraid_aen_msg *msg;
658 struct pmcraid_hcam_hdr *hcam; /* pointer to hcam buffer */
659 struct pmcraid_cmd *cmd; /* pointer to command block used */
660 dma_addr_t baddr; /* system address of hcam buffer */
661 atomic_t ignore; /* process HCAM response ? */
662 };
663
664 #define PMCRAID_AEN_HDR_SIZE sizeof(struct pmcraid_aen_msg)
665
666
667
668 /*
669 * Per adapter structure maintained by LLD
670 */
671 struct pmcraid_instance {
672 /* Array of allowed-to-be-exposed resources, initialized from
673 * Configutation Table, later updated with CCNs
674 */
675 struct pmcraid_resource_entry *res_entries;
676
677 struct list_head free_res_q; /* res_entries lists for easy lookup */
678 struct list_head used_res_q; /* List of to be exposed resources */
679 spinlock_t resource_lock; /* spinlock to protect resource list */
680
681 void __iomem *mapped_dma_addr;
682 void __iomem *ioa_status; /* Iomapped IOA status register */
683 void __iomem *mailbox; /* Iomapped mailbox register */
684 void __iomem *ioarrin; /* IOmapped IOARR IN register */
685
686 struct pmcraid_interrupts int_regs;
687 struct pmcraid_chip_details *chip_cfg;
688
689 /* HostRCBs needed for HCAM */
690 struct pmcraid_hostrcb ldn;
691 struct pmcraid_hostrcb ccn;
692 struct pmcraid_state_msg scn; /* controller state change msg */
693
694
695 /* Bus address of start of HRRQ */
696 dma_addr_t hrrq_start_bus_addr[PMCRAID_NUM_MSIX_VECTORS];
697
698 /* Pointer to 1st entry of HRRQ */
699 __le32 *hrrq_start[PMCRAID_NUM_MSIX_VECTORS];
700
701 /* Pointer to last entry of HRRQ */
702 __le32 *hrrq_end[PMCRAID_NUM_MSIX_VECTORS];
703
704 /* Pointer to current pointer of hrrq */
705 __le32 *hrrq_curr[PMCRAID_NUM_MSIX_VECTORS];
706
707 /* Lock for HRRQ access */
708 spinlock_t hrrq_lock[PMCRAID_NUM_MSIX_VECTORS];
709
710 struct pmcraid_inquiry_data *inq_data;
711 dma_addr_t inq_data_baddr;
712
713 struct pmcraid_timestamp_data *timestamp_data;
714 dma_addr_t timestamp_data_baddr;
715
716 /* size of configuration table entry, varies based on the firmware */
717 u32 config_table_entry_size;
718
719 /* Expected toggle bit at host */
720 u8 host_toggle_bit[PMCRAID_NUM_MSIX_VECTORS];
721
722
723 /* Wait Q for threads to wait for Reset IOA completion */
724 wait_queue_head_t reset_wait_q;
725 struct pmcraid_cmd *reset_cmd;
726
727 /* structures for supporting SIGIO based AEN. */
728 struct fasync_struct *aen_queue;
729 struct mutex aen_queue_lock; /* lock for aen subscribers list */
730 struct cdev cdev;
731
732 struct Scsi_Host *host; /* mid layer interface structure handle */
733 struct pci_dev *pdev; /* PCI device structure handle */
734
735 /* No of Reset IOA retries . IOA marked dead if threshold exceeds */
736 u8 ioa_reset_attempts;
737 #define PMCRAID_RESET_ATTEMPTS 3
738
739 u8 current_log_level; /* default level for logging IOASC errors */
740
741 u8 num_hrrq; /* Number of interrupt vectors allocated */
742 u8 interrupt_mode; /* current interrupt mode legacy or msix */
743 dev_t dev; /* Major-Minor numbers for Char device */
744
745 /* Used as ISR handler argument */
746 struct pmcraid_isr_param hrrq_vector[PMCRAID_NUM_MSIX_VECTORS];
747
748 /* Message id as filled in last fired IOARCB, used to identify HRRQ */
749 atomic_t last_message_id;
750
751 /* configuration table */
752 struct pmcraid_config_table *cfg_table;
753 dma_addr_t cfg_table_bus_addr;
754
755 /* structures related to command blocks */
756 struct kmem_cache *cmd_cachep; /* cache for cmd blocks */
757 struct dma_pool *control_pool; /* pool for control blocks */
758 char cmd_pool_name[64]; /* name of cmd cache */
759 char ctl_pool_name[64]; /* name of control cache */
760
761 struct pmcraid_cmd *cmd_list[PMCRAID_MAX_CMD];
762
763 struct list_head free_cmd_pool;
764 struct list_head pending_cmd_pool;
765 spinlock_t free_pool_lock; /* free pool lock */
766 spinlock_t pending_pool_lock; /* pending pool lock */
767
768 /* Tasklet to handle deferred processing */
769 struct tasklet_struct isr_tasklet[PMCRAID_NUM_MSIX_VECTORS];
770
771 /* Work-queue (Shared) for deferred reset processing */
772 struct work_struct worker_q;
773
774 /* No of IO commands pending with FW */
775 atomic_t outstanding_cmds;
776
777 /* should add/delete resources to mid-layer now ?*/
778 atomic_t expose_resources;
779
780
781
782 u32 ioa_state:4; /* For IOA Reset sequence FSM */
783 #define IOA_STATE_OPERATIONAL 0x0
784 #define IOA_STATE_UNKNOWN 0x1
785 #define IOA_STATE_DEAD 0x2
786 #define IOA_STATE_IN_SOFT_RESET 0x3
787 #define IOA_STATE_IN_HARD_RESET 0x4
788 #define IOA_STATE_IN_RESET_ALERT 0x5
789 #define IOA_STATE_IN_BRINGDOWN 0x6
790 #define IOA_STATE_IN_BRINGUP 0x7
791
792 u32 ioa_reset_in_progress:1; /* true if IOA reset is in progress */
793 u32 ioa_hard_reset:1; /* TRUE if Hard Reset is needed */
794 u32 ioa_unit_check:1; /* Indicates Unit Check condition */
795 u32 ioa_bringdown:1; /* whether IOA needs to be brought down */
796 u32 force_ioa_reset:1; /* force adapter reset ? */
797 u32 reinit_cfg_table:1; /* reinit config table due to lost CCN */
798 u32 ioa_shutdown_type:2;/* shutdown type used during reset */
799 #define SHUTDOWN_NONE 0x0
800 #define SHUTDOWN_NORMAL 0x1
801 #define SHUTDOWN_ABBREV 0x2
802 u32 timestamp_error:1; /* indicate set timestamp for out of sync */
803
804 };
805
806 /* LLD maintained resource entry structure */
807 struct pmcraid_resource_entry {
808 struct list_head queue; /* link to "to be exposed" resources */
809 union {
810 struct pmcraid_config_table_entry cfg_entry;
811 struct pmcraid_config_table_entry_ext cfg_entry_ext;
812 };
813 struct scsi_device *scsi_dev; /* Link scsi_device structure */
814 atomic_t read_failures; /* count of failed READ commands */
815 atomic_t write_failures; /* count of failed WRITE commands */
816
817 /* To indicate add/delete/modify during CCN */
818 u8 change_detected;
819 #define RES_CHANGE_ADD 0x1 /* add this to mid-layer */
820 #define RES_CHANGE_DEL 0x2 /* remove this from mid-layer */
821
822 u8 reset_progress; /* Device is resetting */
823
824 /*
825 * When IOA asks for sync (i.e. IOASC = Not Ready, Sync Required), this
826 * flag will be set, mid layer will be asked to retry. In the next
827 * attempt, this flag will be checked in queuecommand() to set
828 * SYNC_COMPLETE flag in IOARCB (flag_0).
829 */
830 u8 sync_reqd;
831
832 /* target indicates the mapped target_id assigned to this resource if
833 * this is VSET resource. For non-VSET resources this will be un-used
834 * or zero
835 */
836 u8 target;
837 };
838
839 /* Data structures used in IOASC error code logging */
840 struct pmcraid_ioasc_error {
841 u32 ioasc_code; /* IOASC code */
842 u8 log_level; /* default log level assignment. */
843 char *error_string;
844 };
845
846 /* Initial log_level assignments for various IOASCs */
847 #define IOASC_LOG_LEVEL_NONE 0x0 /* no logging */
848 #define IOASC_LOG_LEVEL_MUST 0x1 /* must log: all high-severity errors */
849 #define IOASC_LOG_LEVEL_HARD 0x2 /* optional – low severity errors */
850
851 /* Error information maintained by LLD. LLD initializes the pmcraid_error_table
852 * statically.
853 */
854 static struct pmcraid_ioasc_error pmcraid_ioasc_error_table[] = {
855 {0x01180600, IOASC_LOG_LEVEL_HARD,
856 "Recovered Error, soft media error, sector reassignment suggested"},
857 {0x015D0000, IOASC_LOG_LEVEL_HARD,
858 "Recovered Error, failure prediction threshold exceeded"},
859 {0x015D9200, IOASC_LOG_LEVEL_HARD,
860 "Recovered Error, soft Cache Card Battery error threshold"},
861 {0x015D9200, IOASC_LOG_LEVEL_HARD,
862 "Recovered Error, soft Cache Card Battery error threshold"},
863 {0x02048000, IOASC_LOG_LEVEL_HARD,
864 "Not Ready, IOA Reset Required"},
865 {0x02408500, IOASC_LOG_LEVEL_HARD,
866 "Not Ready, IOA microcode download required"},
867 {0x03110B00, IOASC_LOG_LEVEL_HARD,
868 "Medium Error, data unreadable, reassignment suggested"},
869 {0x03110C00, IOASC_LOG_LEVEL_MUST,
870 "Medium Error, data unreadable do not reassign"},
871 {0x03310000, IOASC_LOG_LEVEL_HARD,
872 "Medium Error, media corrupted"},
873 {0x04050000, IOASC_LOG_LEVEL_HARD,
874 "Hardware Error, IOA can't communicate with device"},
875 {0x04080000, IOASC_LOG_LEVEL_MUST,
876 "Hardware Error, device bus error"},
877 {0x04088000, IOASC_LOG_LEVEL_MUST,
878 "Hardware Error, device bus is not functioning"},
879 {0x04118000, IOASC_LOG_LEVEL_HARD,
880 "Hardware Error, IOA reserved area data check"},
881 {0x04118100, IOASC_LOG_LEVEL_HARD,
882 "Hardware Error, IOA reserved area invalid data pattern"},
883 {0x04118200, IOASC_LOG_LEVEL_HARD,
884 "Hardware Error, IOA reserved area LRC error"},
885 {0x04320000, IOASC_LOG_LEVEL_HARD,
886 "Hardware Error, reassignment space exhausted"},
887 {0x04330000, IOASC_LOG_LEVEL_HARD,
888 "Hardware Error, data transfer underlength error"},
889 {0x04330000, IOASC_LOG_LEVEL_HARD,
890 "Hardware Error, data transfer overlength error"},
891 {0x04418000, IOASC_LOG_LEVEL_MUST,
892 "Hardware Error, PCI bus error"},
893 {0x04440000, IOASC_LOG_LEVEL_HARD,
894 "Hardware Error, device error"},
895 {0x04448200, IOASC_LOG_LEVEL_MUST,
896 "Hardware Error, IOA error"},
897 {0x04448300, IOASC_LOG_LEVEL_HARD,
898 "Hardware Error, undefined device response"},
899 {0x04448400, IOASC_LOG_LEVEL_HARD,
900 "Hardware Error, IOA microcode error"},
901 {0x04448600, IOASC_LOG_LEVEL_HARD,
902 "Hardware Error, IOA reset required"},
903 {0x04449200, IOASC_LOG_LEVEL_HARD,
904 "Hardware Error, hard Cache Fearuee Card Battery error"},
905 {0x0444A000, IOASC_LOG_LEVEL_HARD,
906 "Hardware Error, failed device altered"},
907 {0x0444A200, IOASC_LOG_LEVEL_HARD,
908 "Hardware Error, data check after reassignment"},
909 {0x0444A300, IOASC_LOG_LEVEL_HARD,
910 "Hardware Error, LRC error after reassignment"},
911 {0x044A0000, IOASC_LOG_LEVEL_HARD,
912 "Hardware Error, device bus error (msg/cmd phase)"},
913 {0x04670400, IOASC_LOG_LEVEL_HARD,
914 "Hardware Error, new device can't be used"},
915 {0x04678000, IOASC_LOG_LEVEL_HARD,
916 "Hardware Error, invalid multiadapter configuration"},
917 {0x04678100, IOASC_LOG_LEVEL_HARD,
918 "Hardware Error, incorrect connection between enclosures"},
919 {0x04678200, IOASC_LOG_LEVEL_HARD,
920 "Hardware Error, connections exceed IOA design limits"},
921 {0x04678300, IOASC_LOG_LEVEL_HARD,
922 "Hardware Error, incorrect multipath connection"},
923 {0x04679000, IOASC_LOG_LEVEL_HARD,
924 "Hardware Error, command to LUN failed"},
925 {0x064C8000, IOASC_LOG_LEVEL_HARD,
926 "Unit Attention, cache exists for missing/failed device"},
927 {0x06670100, IOASC_LOG_LEVEL_HARD,
928 "Unit Attention, incompatible exposed mode device"},
929 {0x06670600, IOASC_LOG_LEVEL_HARD,
930 "Unit Attention, attachment of logical unit failed"},
931 {0x06678000, IOASC_LOG_LEVEL_HARD,
932 "Unit Attention, cables exceed connective design limit"},
933 {0x06678300, IOASC_LOG_LEVEL_HARD,
934 "Unit Attention, incomplete multipath connection between" \
935 "IOA and enclosure"},
936 {0x06678400, IOASC_LOG_LEVEL_HARD,
937 "Unit Attention, incomplete multipath connection between" \
938 "device and enclosure"},
939 {0x06678500, IOASC_LOG_LEVEL_HARD,
940 "Unit Attention, incomplete multipath connection between" \
941 "IOA and remote IOA"},
942 {0x06678600, IOASC_LOG_LEVEL_HARD,
943 "Unit Attention, missing remote IOA"},
944 {0x06679100, IOASC_LOG_LEVEL_HARD,
945 "Unit Attention, enclosure doesn't support required multipath" \
946 "function"},
947 {0x06698200, IOASC_LOG_LEVEL_HARD,
948 "Unit Attention, corrupt array parity detected on device"},
949 {0x066B0200, IOASC_LOG_LEVEL_HARD,
950 "Unit Attention, array exposed"},
951 {0x066B8200, IOASC_LOG_LEVEL_HARD,
952 "Unit Attention, exposed array is still protected"},
953 {0x066B9200, IOASC_LOG_LEVEL_HARD,
954 "Unit Attention, Multipath redundancy level got worse"},
955 {0x07270000, IOASC_LOG_LEVEL_HARD,
956 "Data Protect, device is read/write protected by IOA"},
957 {0x07278000, IOASC_LOG_LEVEL_HARD,
958 "Data Protect, IOA doesn't support device attribute"},
959 {0x07278100, IOASC_LOG_LEVEL_HARD,
960 "Data Protect, NVRAM mirroring prohibited"},
961 {0x07278400, IOASC_LOG_LEVEL_HARD,
962 "Data Protect, array is short 2 or more devices"},
963 {0x07278600, IOASC_LOG_LEVEL_HARD,
964 "Data Protect, exposed array is short a required device"},
965 {0x07278700, IOASC_LOG_LEVEL_HARD,
966 "Data Protect, array members not at required addresses"},
967 {0x07278800, IOASC_LOG_LEVEL_HARD,
968 "Data Protect, exposed mode device resource address conflict"},
969 {0x07278900, IOASC_LOG_LEVEL_HARD,
970 "Data Protect, incorrect resource address of exposed mode device"},
971 {0x07278A00, IOASC_LOG_LEVEL_HARD,
972 "Data Protect, Array is missing a device and parity is out of sync"},
973 {0x07278B00, IOASC_LOG_LEVEL_HARD,
974 "Data Protect, maximum number of arrays already exist"},
975 {0x07278C00, IOASC_LOG_LEVEL_HARD,
976 "Data Protect, cannot locate cache data for device"},
977 {0x07278D00, IOASC_LOG_LEVEL_HARD,
978 "Data Protect, cache data exits for a changed device"},
979 {0x07279100, IOASC_LOG_LEVEL_HARD,
980 "Data Protect, detection of a device requiring format"},
981 {0x07279200, IOASC_LOG_LEVEL_HARD,
982 "Data Protect, IOA exceeds maximum number of devices"},
983 {0x07279600, IOASC_LOG_LEVEL_HARD,
984 "Data Protect, missing array, volume set is not functional"},
985 {0x07279700, IOASC_LOG_LEVEL_HARD,
986 "Data Protect, single device for a volume set"},
987 {0x07279800, IOASC_LOG_LEVEL_HARD,
988 "Data Protect, missing multiple devices for a volume set"},
989 {0x07279900, IOASC_LOG_LEVEL_HARD,
990 "Data Protect, maximum number of volument sets already exists"},
991 {0x07279A00, IOASC_LOG_LEVEL_HARD,
992 "Data Protect, other volume set problem"},
993 };
994
995 /* macros to help in debugging */
996 #define pmcraid_err(...) \
997 printk(KERN_ERR "MaxRAID: "__VA_ARGS__)
998
999 #define pmcraid_info(...) \
1000 if (pmcraid_debug_log) \
1001 printk(KERN_INFO "MaxRAID: "__VA_ARGS__)
1002
1003 /* check if given command is a SCSI READ or SCSI WRITE command */
1004 #define SCSI_READ_CMD 0x1 /* any of SCSI READ commands */
1005 #define SCSI_WRITE_CMD 0x2 /* any of SCSI WRITE commands */
1006 #define SCSI_CMD_TYPE(opcode) \
1007 ({ u8 op = opcode; u8 __type = 0;\
1008 if (op == READ_6 || op == READ_10 || op == READ_12 || op == READ_16)\
1009 __type = SCSI_READ_CMD;\
1010 else if (op == WRITE_6 || op == WRITE_10 || op == WRITE_12 || \
1011 op == WRITE_16)\
1012 __type = SCSI_WRITE_CMD;\
1013 __type;\
1014 })
1015
1016 #define IS_SCSI_READ_WRITE(opcode) \
1017 ({ u8 __type = SCSI_CMD_TYPE(opcode); \
1018 (__type == SCSI_READ_CMD || __type == SCSI_WRITE_CMD) ? 1 : 0;\
1019 })
1020
1021
1022 /*
1023 * pmcraid_ioctl_header - definition of header structure that precedes all the
1024 * buffers given as ioctl arguments.
1025 *
1026 * .signature : always ASCII string, "PMCRAID"
1027 * .reserved : not used
1028 * .buffer_length : length of the buffer following the header
1029 */
1030 struct pmcraid_ioctl_header {
1031 u8 signature[8];
1032 u32 reserved;
1033 u32 buffer_length;
1034 };
1035
1036 #define PMCRAID_IOCTL_SIGNATURE "PMCRAID"
1037
1038 /*
1039 * pmcraid_passthrough_ioctl_buffer - structure given as argument to
1040 * passthrough(or firmware handled) IOCTL commands. Note that ioarcb requires
1041 * 32-byte alignment so, it is necessary to pack this structure to avoid any
1042 * holes between ioctl_header and passthrough buffer
1043 *
1044 * .ioactl_header : ioctl header
1045 * .ioarcb : filled-up ioarcb buffer, driver always reads this buffer
1046 * .ioasa : buffer for ioasa, driver fills this with IOASA from firmware
1047 * .request_buffer: The I/O buffer (flat), driver reads/writes to this based on
1048 * the transfer directions passed in ioarcb.flags0. Contents
1049 * of this buffer are valid only when ioarcb.data_transfer_len
1050 * is not zero.
1051 */
1052 struct pmcraid_passthrough_ioctl_buffer {
1053 struct pmcraid_ioctl_header ioctl_header;
1054 struct pmcraid_ioarcb ioarcb;
1055 struct pmcraid_ioasa ioasa;
1056 u8 request_buffer[1];
1057 } __attribute__ ((packed));
1058
1059 /*
1060 * keys to differentiate between driver handled IOCTLs and passthrough
1061 * IOCTLs passed to IOA. driver determines the ioctl type using macro
1062 * _IOC_TYPE
1063 */
1064 #define PMCRAID_DRIVER_IOCTL 'D'
1065 #define PMCRAID_PASSTHROUGH_IOCTL 'F'
1066
1067 #define DRV_IOCTL(n, size) \
1068 _IOC(_IOC_READ|_IOC_WRITE, PMCRAID_DRIVER_IOCTL, (n), (size))
1069
1070 #define FMW_IOCTL(n, size) \
1071 _IOC(_IOC_READ|_IOC_WRITE, PMCRAID_PASSTHROUGH_IOCTL, (n), (size))
1072
1073 /*
1074 * _ARGSIZE: macro that gives size of the argument type passed to an IOCTL cmd.
1075 * This is to facilitate applications avoiding un-necessary memory allocations.
1076 * For example, most of driver handled ioctls do not require ioarcb, ioasa.
1077 */
1078 #define _ARGSIZE(arg) (sizeof(struct pmcraid_ioctl_header) + sizeof(arg))
1079
1080 /* Driver handled IOCTL command definitions */
1081
1082 #define PMCRAID_IOCTL_RESET_ADAPTER \
1083 DRV_IOCTL(5, sizeof(struct pmcraid_ioctl_header))
1084
1085 /* passthrough/firmware handled commands */
1086 #define PMCRAID_IOCTL_PASSTHROUGH_COMMAND \
1087 FMW_IOCTL(1, sizeof(struct pmcraid_passthrough_ioctl_buffer))
1088
1089 #define PMCRAID_IOCTL_DOWNLOAD_MICROCODE \
1090 FMW_IOCTL(2, sizeof(struct pmcraid_passthrough_ioctl_buffer))
1091
1092
1093 #endif /* _PMCRAID_H */
Linux with added FPC-III support