Linux 5.1.15
[linux/fpc-iii.git] / drivers / scsi / qla2xxx / qla_mr.h
blobaeaa1b40b1fc39187d0c3afd3ea768d9d9c042ac
1 /*
2 * QLogic Fibre Channel HBA Driver
3 * Copyright (c) 2003-2014 QLogic Corporation
5 * See LICENSE.qla2xxx for copyright and licensing details.
6 */
7 #ifndef __QLA_MR_H
8 #define __QLA_MR_H
11 * The PCI VendorID and DeviceID for our board.
13 #define PCI_DEVICE_ID_QLOGIC_ISPF001 0xF001
15 /* FX00 specific definitions */
17 #define FX00_COMMAND_TYPE_7 0x07 /* Command Type 7 entry for 7XXX */
18 struct cmd_type_7_fx00 {
19 uint8_t entry_type; /* Entry type. */
20 uint8_t entry_count; /* Entry count. */
21 uint8_t sys_define; /* System defined. */
22 uint8_t entry_status; /* Entry Status. */
24 uint32_t handle; /* System handle. */
25 uint8_t reserved_0;
26 uint8_t port_path_ctrl;
27 uint16_t reserved_1;
29 __le16 tgt_idx; /* Target Idx. */
30 uint16_t timeout; /* Command timeout. */
32 __le16 dseg_count; /* Data segment count. */
33 uint8_t scsi_rsp_dsd_len;
34 uint8_t reserved_2;
36 struct scsi_lun lun; /* LUN (LE). */
38 uint8_t cntrl_flags;
40 uint8_t task_mgmt_flags; /* Task management flags. */
42 uint8_t task;
44 uint8_t crn;
46 uint8_t fcp_cdb[MAX_CMDSZ]; /* SCSI command words. */
47 __le32 byte_count; /* Total byte count. */
49 uint32_t dseg_0_address[2]; /* Data segment 0 address. */
50 uint32_t dseg_0_len; /* Data segment 0 length. */
53 #define STATUS_TYPE_FX00 0x01 /* Status entry. */
54 struct sts_entry_fx00 {
55 uint8_t entry_type; /* Entry type. */
56 uint8_t entry_count; /* Entry count. */
57 uint8_t sys_define; /* System defined. */
58 uint8_t entry_status; /* Entry Status. */
60 uint32_t handle; /* System handle. */
61 uint32_t reserved_3; /* System handle. */
63 __le16 comp_status; /* Completion status. */
64 uint16_t reserved_0; /* OX_ID used by the firmware. */
66 __le32 residual_len; /* FW calc residual transfer length. */
68 uint16_t reserved_1;
69 uint16_t state_flags; /* State flags. */
71 uint16_t reserved_2;
72 __le16 scsi_status; /* SCSI status. */
74 uint32_t sense_len; /* FCP SENSE length. */
75 uint8_t data[32]; /* FCP response/sense information. */
79 #define MAX_HANDLE_COUNT 15
80 #define MULTI_STATUS_TYPE_FX00 0x0D
82 struct multi_sts_entry_fx00 {
83 uint8_t entry_type; /* Entry type. */
84 uint8_t entry_count; /* Entry count. */
85 uint8_t handle_count;
86 uint8_t entry_status;
88 __le32 handles[MAX_HANDLE_COUNT];
91 #define TSK_MGMT_IOCB_TYPE_FX00 0x05
92 struct tsk_mgmt_entry_fx00 {
93 uint8_t entry_type; /* Entry type. */
94 uint8_t entry_count; /* Entry count. */
95 uint8_t sys_define;
96 uint8_t entry_status; /* Entry Status. */
98 __le32 handle; /* System handle. */
100 uint32_t reserved_0;
102 __le16 tgt_id; /* Target Idx. */
104 uint16_t reserved_1;
105 uint16_t reserved_3;
106 uint16_t reserved_4;
108 struct scsi_lun lun; /* LUN (LE). */
110 __le32 control_flags; /* Control Flags. */
112 uint8_t reserved_2[32];
116 #define ABORT_IOCB_TYPE_FX00 0x08 /* Abort IOCB status. */
117 struct abort_iocb_entry_fx00 {
118 uint8_t entry_type; /* Entry type. */
119 uint8_t entry_count; /* Entry count. */
120 uint8_t sys_define; /* System defined. */
121 uint8_t entry_status; /* Entry Status. */
123 __le32 handle; /* System handle. */
124 __le32 reserved_0;
126 __le16 tgt_id_sts; /* Completion status. */
127 __le16 options;
129 __le32 abort_handle; /* System handle. */
130 __le32 reserved_2;
132 __le16 req_que_no;
133 uint8_t reserved_1[38];
136 #define IOCTL_IOSB_TYPE_FX00 0x0C
137 struct ioctl_iocb_entry_fx00 {
138 uint8_t entry_type; /* Entry type. */
139 uint8_t entry_count; /* Entry count. */
140 uint8_t sys_define; /* System defined. */
141 uint8_t entry_status; /* Entry Status. */
143 uint32_t handle; /* System handle. */
144 uint32_t reserved_0; /* System handle. */
146 uint16_t comp_func_num;
147 __le16 fw_iotcl_flags;
149 __le32 dataword_r; /* Data word returned */
150 uint32_t adapid; /* Adapter ID */
151 uint32_t dataword_r_extra;
153 __le32 seq_no;
154 uint8_t reserved_2[20];
155 uint32_t residuallen;
156 __le32 status;
159 #define STATUS_CONT_TYPE_FX00 0x04
161 #define FX00_IOCB_TYPE 0x0B
162 struct fxdisc_entry_fx00 {
163 uint8_t entry_type; /* Entry type. */
164 uint8_t entry_count; /* Entry count. */
165 uint8_t sys_define; /* System Defined. */
166 uint8_t entry_status; /* Entry Status. */
168 __le32 handle; /* System handle. */
169 __le32 reserved_0; /* System handle. */
171 __le16 func_num;
172 __le16 req_xfrcnt;
173 __le16 req_dsdcnt;
174 __le16 rsp_xfrcnt;
175 __le16 rsp_dsdcnt;
176 uint8_t flags;
177 uint8_t reserved_1;
179 __le32 dseg_rq_address[2]; /* Data segment 0 address. */
180 __le32 dseg_rq_len; /* Data segment 0 length. */
181 __le32 dseg_rsp_address[2]; /* Data segment 1 address. */
182 __le32 dseg_rsp_len; /* Data segment 1 length. */
184 __le32 dataword;
185 __le32 adapid;
186 __le32 adapid_hi;
187 __le32 dataword_extra;
190 struct qlafx00_tgt_node_info {
191 uint8_t tgt_node_wwpn[WWN_SIZE];
192 uint8_t tgt_node_wwnn[WWN_SIZE];
193 uint32_t tgt_node_state;
194 uint8_t reserved[128];
195 uint32_t reserved_1[8];
196 uint64_t reserved_2[4];
197 } __packed;
199 #define QLAFX00_TGT_NODE_INFO sizeof(struct qlafx00_tgt_node_info)
201 #define QLAFX00_LINK_STATUS_DOWN 0x10
202 #define QLAFX00_LINK_STATUS_UP 0x11
204 #define QLAFX00_PORT_SPEED_2G 0x2
205 #define QLAFX00_PORT_SPEED_4G 0x4
206 #define QLAFX00_PORT_SPEED_8G 0x8
207 #define QLAFX00_PORT_SPEED_10G 0xa
208 struct port_info_data {
209 uint8_t port_state;
210 uint8_t port_type;
211 uint16_t port_identifier;
212 uint32_t up_port_state;
213 uint8_t fw_ver_num[32];
214 uint8_t portal_attrib;
215 uint16_t host_option;
216 uint8_t reset_delay;
217 uint8_t pdwn_retry_cnt;
218 uint16_t max_luns2tgt;
219 uint8_t risc_ver;
220 uint8_t pconn_option;
221 uint16_t risc_option;
222 uint16_t max_frame_len;
223 uint16_t max_iocb_alloc;
224 uint16_t exec_throttle;
225 uint8_t retry_cnt;
226 uint8_t retry_delay;
227 uint8_t port_name[8];
228 uint8_t port_id[3];
229 uint8_t link_status;
230 uint8_t plink_rate;
231 uint32_t link_config;
232 uint16_t adap_haddr;
233 uint8_t tgt_disc;
234 uint8_t log_tout;
235 uint8_t node_name[8];
236 uint16_t erisc_opt1;
237 uint8_t resp_acc_tmr;
238 uint8_t intr_del_tmr;
239 uint8_t erisc_opt2;
240 uint8_t alt_port_name[8];
241 uint8_t alt_node_name[8];
242 uint8_t link_down_tout;
243 uint8_t conn_type;
244 uint8_t fc_fw_mode;
245 uint32_t uiReserved[48];
246 } __packed;
248 /* OS Type Designations */
249 #define OS_TYPE_UNKNOWN 0
250 #define OS_TYPE_LINUX 2
252 /* Linux Info */
253 #define SYSNAME_LENGTH 128
254 #define NODENAME_LENGTH 64
255 #define RELEASE_LENGTH 64
256 #define VERSION_LENGTH 64
257 #define MACHINE_LENGTH 64
258 #define DOMNAME_LENGTH 64
260 struct host_system_info {
261 uint32_t os_type;
262 char sysname[SYSNAME_LENGTH];
263 char nodename[NODENAME_LENGTH];
264 char release[RELEASE_LENGTH];
265 char version[VERSION_LENGTH];
266 char machine[MACHINE_LENGTH];
267 char domainname[DOMNAME_LENGTH];
268 char hostdriver[VERSION_LENGTH];
269 uint32_t reserved[64];
270 } __packed;
272 struct register_host_info {
273 struct host_system_info hsi; /* host system info */
274 uint64_t utc; /* UTC (system time) */
275 uint32_t reserved[64]; /* future additions */
276 } __packed;
279 #define QLAFX00_PORT_DATA_INFO (sizeof(struct port_info_data))
280 #define QLAFX00_TGT_NODE_LIST_SIZE (sizeof(uint32_t) * 32)
282 struct config_info_data {
283 uint8_t model_num[16];
284 uint8_t model_description[80];
285 uint8_t reserved0[160];
286 uint8_t symbolic_name[64];
287 uint8_t serial_num[32];
288 uint8_t hw_version[16];
289 uint8_t fw_version[16];
290 uint8_t uboot_version[16];
291 uint8_t fru_serial_num[32];
293 uint8_t fc_port_count;
294 uint8_t iscsi_port_count;
295 uint8_t reserved1[2];
297 uint8_t mode;
298 uint8_t log_level;
299 uint8_t reserved2[2];
301 uint32_t log_size;
303 uint8_t tgt_pres_mode;
304 uint8_t iqn_flags;
305 uint8_t lun_mapping;
307 uint64_t adapter_id;
309 uint32_t cluster_key_len;
310 uint8_t cluster_key[16];
312 uint64_t cluster_master_id;
313 uint64_t cluster_slave_id;
314 uint8_t cluster_flags;
315 uint32_t enabled_capabilities;
316 uint32_t nominal_temp_value;
317 } __packed;
319 #define FXDISC_GET_CONFIG_INFO 0x01
320 #define FXDISC_GET_PORT_INFO 0x02
321 #define FXDISC_GET_TGT_NODE_INFO 0x80
322 #define FXDISC_GET_TGT_NODE_LIST 0x81
323 #define FXDISC_REG_HOST_INFO 0x99
324 #define FXDISC_ABORT_IOCTL 0xff
326 #define QLAFX00_HBA_ICNTRL_REG 0x20B08
327 #define QLAFX00_ICR_ENB_MASK 0x80000000
328 #define QLAFX00_ICR_DIS_MASK 0x7fffffff
329 #define QLAFX00_HST_RST_REG 0x18264
330 #define QLAFX00_SOC_TEMP_REG 0x184C4
331 #define QLAFX00_HST_TO_HBA_REG 0x20A04
332 #define QLAFX00_HBA_TO_HOST_REG 0x21B70
333 #define QLAFX00_HST_INT_STS_BITS 0x7
334 #define QLAFX00_BAR1_BASE_ADDR_REG 0x40018
335 #define QLAFX00_PEX0_WIN0_BASE_ADDR_REG 0x41824
337 #define QLAFX00_INTR_MB_CMPLT 0x1
338 #define QLAFX00_INTR_RSP_CMPLT 0x2
339 #define QLAFX00_INTR_ASYNC_CMPLT 0x4
341 #define QLAFX00_MBA_SYSTEM_ERR 0x8002
342 #define QLAFX00_MBA_TEMP_OVER 0x8005
343 #define QLAFX00_MBA_TEMP_NORM 0x8006
344 #define QLAFX00_MBA_TEMP_CRIT 0x8007
345 #define QLAFX00_MBA_LINK_UP 0x8011
346 #define QLAFX00_MBA_LINK_DOWN 0x8012
347 #define QLAFX00_MBA_PORT_UPDATE 0x8014
348 #define QLAFX00_MBA_SHUTDOWN_RQSTD 0x8062
350 #define SOC_SW_RST_CONTROL_REG_CORE0 0x0020800
351 #define SOC_FABRIC_RST_CONTROL_REG 0x0020840
352 #define SOC_FABRIC_CONTROL_REG 0x0020200
353 #define SOC_FABRIC_CONFIG_REG 0x0020204
354 #define SOC_PWR_MANAGEMENT_PWR_DOWN_REG 0x001820C
356 #define SOC_INTERRUPT_SOURCE_I_CONTROL_REG 0x0020B00
357 #define SOC_CORE_TIMER_REG 0x0021850
358 #define SOC_IRQ_ACK_REG 0x00218b4
360 #define CONTINUE_A64_TYPE_FX00 0x03 /* Continuation entry. */
362 #define QLAFX00_SET_HST_INTR(ha, value) \
363 WRT_REG_DWORD((ha)->cregbase + QLAFX00_HST_TO_HBA_REG, \
364 value)
366 #define QLAFX00_CLR_HST_INTR(ha, value) \
367 WRT_REG_DWORD((ha)->cregbase + QLAFX00_HBA_TO_HOST_REG, \
368 ~value)
370 #define QLAFX00_RD_INTR_REG(ha) \
371 RD_REG_DWORD((ha)->cregbase + QLAFX00_HBA_TO_HOST_REG)
373 #define QLAFX00_CLR_INTR_REG(ha, value) \
374 WRT_REG_DWORD((ha)->cregbase + QLAFX00_HBA_TO_HOST_REG, \
375 ~value)
377 #define QLAFX00_SET_HBA_SOC_REG(ha, off, val)\
378 WRT_REG_DWORD((ha)->cregbase + off, val)
380 #define QLAFX00_GET_HBA_SOC_REG(ha, off)\
381 RD_REG_DWORD((ha)->cregbase + off)
383 #define QLAFX00_HBA_RST_REG(ha, val)\
384 WRT_REG_DWORD((ha)->cregbase + QLAFX00_HST_RST_REG, val)
386 #define QLAFX00_RD_ICNTRL_REG(ha) \
387 RD_REG_DWORD((ha)->cregbase + QLAFX00_HBA_ICNTRL_REG)
389 #define QLAFX00_ENABLE_ICNTRL_REG(ha) \
390 WRT_REG_DWORD((ha)->cregbase + QLAFX00_HBA_ICNTRL_REG, \
391 (QLAFX00_GET_HBA_SOC_REG(ha, QLAFX00_HBA_ICNTRL_REG) | \
392 QLAFX00_ICR_ENB_MASK))
394 #define QLAFX00_DISABLE_ICNTRL_REG(ha) \
395 WRT_REG_DWORD((ha)->cregbase + QLAFX00_HBA_ICNTRL_REG, \
396 (QLAFX00_GET_HBA_SOC_REG(ha, QLAFX00_HBA_ICNTRL_REG) & \
397 QLAFX00_ICR_DIS_MASK))
399 #define QLAFX00_RD_REG(ha, off) \
400 RD_REG_DWORD((ha)->cregbase + off)
402 #define QLAFX00_WR_REG(ha, off, val) \
403 WRT_REG_DWORD((ha)->cregbase + off, val)
405 struct qla_mt_iocb_rqst_fx00 {
406 __le32 reserved_0;
408 __le16 func_type;
409 uint8_t flags;
410 uint8_t reserved_1;
412 __le32 dataword;
414 __le32 adapid;
415 __le32 adapid_hi;
417 __le32 dataword_extra;
419 __le16 req_len;
420 __le16 reserved_2;
422 __le16 rsp_len;
423 __le16 reserved_3;
426 struct qla_mt_iocb_rsp_fx00 {
427 uint32_t reserved_1;
429 uint16_t func_type;
430 __le16 ioctl_flags;
432 __le32 ioctl_data;
434 uint32_t adapid;
435 uint32_t adapid_hi;
437 uint32_t reserved_2;
438 __le32 seq_number;
440 uint8_t reserved_3[20];
442 int32_t res_count;
444 __le32 status;
448 #define MAILBOX_REGISTER_COUNT_FX00 16
449 #define AEN_MAILBOX_REGISTER_COUNT_FX00 8
450 #define MAX_FIBRE_DEVICES_FX00 512
451 #define MAX_LUNS_FX00 0x1024
452 #define MAX_TARGETS_FX00 MAX_ISA_DEVICES
453 #define REQUEST_ENTRY_CNT_FX00 512 /* Number of request entries. */
454 #define RESPONSE_ENTRY_CNT_FX00 256 /* Number of response entries.*/
457 * Firmware state codes for QLAFX00 adapters
459 #define FSTATE_FX00_CONFIG_WAIT 0x0000 /* Waiting for driver to issue
460 * Initialize FW Mbox cmd
462 #define FSTATE_FX00_INITIALIZED 0x1000 /* FW has been initialized by
463 * the driver
466 #define FX00_DEF_RATOV 10
468 struct mr_data_fx00 {
469 uint8_t symbolic_name[64];
470 uint8_t serial_num[32];
471 uint8_t hw_version[16];
472 uint8_t fw_version[16];
473 uint8_t uboot_version[16];
474 uint8_t fru_serial_num[32];
475 fc_port_t fcport; /* fcport used for requests
476 * that are not linked
477 * to a particular target
479 uint8_t fw_hbt_en;
480 uint8_t fw_hbt_cnt;
481 uint8_t fw_hbt_miss_cnt;
482 uint32_t old_fw_hbt_cnt;
483 uint16_t fw_reset_timer_tick;
484 uint8_t fw_reset_timer_exp;
485 uint16_t fw_critemp_timer_tick;
486 uint32_t old_aenmbx0_state;
487 uint32_t critical_temperature;
488 bool extended_io_enabled;
489 bool host_info_resend;
490 uint8_t hinfo_resend_timer_tick;
493 #define QLAFX00_EXTENDED_IO_EN_MASK 0x20
496 * SoC Junction Temperature is stored in
497 * bits 9:1 of SoC Junction Temperature Register
498 * in a firmware specific format format.
499 * To get the temperature in Celsius degrees
500 * the value from this bitfiled should be converted
501 * using this formula:
502 * Temperature (degrees C) = ((3,153,000 - (10,000 * X)) / 13,825)
503 * where X is the bit field value
504 * this macro reads the register, extracts the bitfield value,
505 * performs the calcualtions and returns temperature in Celsius
507 #define QLAFX00_GET_TEMPERATURE(ha) ((3153000 - (10000 * \
508 ((QLAFX00_RD_REG(ha, QLAFX00_SOC_TEMP_REG) & 0x3FE) >> 1))) / 13825)
511 #define QLAFX00_LOOP_DOWN_TIME 615 /* 600 */
512 #define QLAFX00_HEARTBEAT_INTERVAL 6 /* number of seconds */
513 #define QLAFX00_HEARTBEAT_MISS_CNT 3 /* number of miss */
514 #define QLAFX00_RESET_INTERVAL 120 /* number of seconds */
515 #define QLAFX00_MAX_RESET_INTERVAL 600 /* number of seconds */
516 #define QLAFX00_CRITEMP_INTERVAL 60 /* number of seconds */
517 #define QLAFX00_HINFO_RESEND_INTERVAL 60 /* number of seconds */
519 #define QLAFX00_CRITEMP_THRSHLD 80 /* Celsius degrees */
521 /* Max conncurrent IOs that can be queued */
522 #define QLAFX00_MAX_CANQUEUE 1024
524 /* IOCTL IOCB abort success */
525 #define QLAFX00_IOCTL_ICOB_ABORT_SUCCESS 0x68
527 #endif