?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 5.1.15
[linux/fpc-iii.git] / drivers / spi / spi-pic32-sqi.c
blob1ae9af5f17ecaf93e675500c9f77ea4d8838f02d
1 /*
2 * PIC32 Quad SPI controller driver.
3 *
4 * Purna Chandra Mandal <purna.mandal@microchip.com>
5 * Copyright (c) 2016, Microchip Technology Inc.
6 *
7 * This program is free software; you can distribute it and/or modify it
8 * under the terms of the GNU General Public License (Version 2) as
9 * published by the Free Software Foundation.
10 *
11 * This program is distributed in the hope it will be useful, but WITHOUT
12 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
13 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
14 * for more details.
15 */
16
17 #include <linux/clk.h>
18 #include <linux/dma-mapping.h>
19 #include <linux/interrupt.h>
20 #include <linux/io.h>
21 #include <linux/iopoll.h>
22 #include <linux/module.h>
23 #include <linux/of.h>
24 #include <linux/platform_device.h>
25 #include <linux/slab.h>
26 #include <linux/spi/spi.h>
27
28 /* SQI registers */
29 #define PESQI_XIP_CONF1_REG 0x00
30 #define PESQI_XIP_CONF2_REG 0x04
31 #define PESQI_CONF_REG 0x08
32 #define PESQI_CTRL_REG 0x0C
33 #define PESQI_CLK_CTRL_REG 0x10
34 #define PESQI_CMD_THRES_REG 0x14
35 #define PESQI_INT_THRES_REG 0x18
36 #define PESQI_INT_ENABLE_REG 0x1C
37 #define PESQI_INT_STAT_REG 0x20
38 #define PESQI_TX_DATA_REG 0x24
39 #define PESQI_RX_DATA_REG 0x28
40 #define PESQI_STAT1_REG 0x2C
41 #define PESQI_STAT2_REG 0x30
42 #define PESQI_BD_CTRL_REG 0x34
43 #define PESQI_BD_CUR_ADDR_REG 0x38
44 #define PESQI_BD_BASE_ADDR_REG 0x40
45 #define PESQI_BD_STAT_REG 0x44
46 #define PESQI_BD_POLL_CTRL_REG 0x48
47 #define PESQI_BD_TX_DMA_STAT_REG 0x4C
48 #define PESQI_BD_RX_DMA_STAT_REG 0x50
49 #define PESQI_THRES_REG 0x54
50 #define PESQI_INT_SIGEN_REG 0x58
51
52 /* PESQI_CONF_REG fields */
53 #define PESQI_MODE 0x7
54 #define PESQI_MODE_BOOT 0
55 #define PESQI_MODE_PIO 1
56 #define PESQI_MODE_DMA 2
57 #define PESQI_MODE_XIP 3
58 #define PESQI_MODE_SHIFT 0
59 #define PESQI_CPHA BIT(3)
60 #define PESQI_CPOL BIT(4)
61 #define PESQI_LSBF BIT(5)
62 #define PESQI_RXLATCH BIT(7)
63 #define PESQI_SERMODE BIT(8)
64 #define PESQI_WP_EN BIT(9)
65 #define PESQI_HOLD_EN BIT(10)
66 #define PESQI_BURST_EN BIT(12)
67 #define PESQI_CS_CTRL_HW BIT(15)
68 #define PESQI_SOFT_RESET BIT(16)
69 #define PESQI_LANES_SHIFT 20
70 #define PESQI_SINGLE_LANE 0
71 #define PESQI_DUAL_LANE 1
72 #define PESQI_QUAD_LANE 2
73 #define PESQI_CSEN_SHIFT 24
74 #define PESQI_EN BIT(23)
75
76 /* PESQI_CLK_CTRL_REG fields */
77 #define PESQI_CLK_EN BIT(0)
78 #define PESQI_CLK_STABLE BIT(1)
79 #define PESQI_CLKDIV_SHIFT 8
80 #define PESQI_CLKDIV 0xff
81
82 /* PESQI_INT_THR/CMD_THR_REG */
83 #define PESQI_TXTHR_MASK 0x1f
84 #define PESQI_TXTHR_SHIFT 8
85 #define PESQI_RXTHR_MASK 0x1f
86 #define PESQI_RXTHR_SHIFT 0
87
88 /* PESQI_INT_EN/INT_STAT/INT_SIG_EN_REG */
89 #define PESQI_TXEMPTY BIT(0)
90 #define PESQI_TXFULL BIT(1)
91 #define PESQI_TXTHR BIT(2)
92 #define PESQI_RXEMPTY BIT(3)
93 #define PESQI_RXFULL BIT(4)
94 #define PESQI_RXTHR BIT(5)
95 #define PESQI_BDDONE BIT(9) /* BD processing complete */
96 #define PESQI_PKTCOMP BIT(10) /* packet processing complete */
97 #define PESQI_DMAERR BIT(11) /* error */
98
99 /* PESQI_BD_CTRL_REG */
100 #define PESQI_DMA_EN BIT(0) /* enable DMA engine */
101 #define PESQI_POLL_EN BIT(1) /* enable polling */
102 #define PESQI_BDP_START BIT(2) /* start BD processor */
103
104 /* PESQI controller buffer descriptor */
105 struct buf_desc {
106 u32 bd_ctrl; /* control */
107 u32 bd_status; /* reserved */
108 u32 bd_addr; /* DMA buffer addr */
109 u32 bd_nextp; /* next item in chain */
110 };
111
112 /* bd_ctrl */
113 #define BD_BUFLEN 0x1ff
114 #define BD_CBD_INT_EN BIT(16) /* Current BD is processed */
115 #define BD_PKT_INT_EN BIT(17) /* All BDs of PKT processed */
116 #define BD_LIFM BIT(18) /* last data of pkt */
117 #define BD_LAST BIT(19) /* end of list */
118 #define BD_DATA_RECV BIT(20) /* receive data */
119 #define BD_DDR BIT(21) /* DDR mode */
120 #define BD_DUAL BIT(22) /* Dual SPI */
121 #define BD_QUAD BIT(23) /* Quad SPI */
122 #define BD_LSBF BIT(25) /* LSB First */
123 #define BD_STAT_CHECK BIT(27) /* Status poll */
124 #define BD_DEVSEL_SHIFT 28 /* CS */
125 #define BD_CS_DEASSERT BIT(30) /* de-assert CS after current BD */
126 #define BD_EN BIT(31) /* BD owned by H/W */
127
128 /**
129 * struct ring_desc - Representation of SQI ring descriptor
130 * @list: list element to add to free or used list.
131 * @bd: PESQI controller buffer descriptor
132 * @bd_dma: DMA address of PESQI controller buffer descriptor
133 * @xfer_len: transfer length
134 */
135 struct ring_desc {
136 struct list_head list;
137 struct buf_desc *bd;
138 dma_addr_t bd_dma;
139 u32 xfer_len;
140 };
141
142 /* Global constants */
143 #define PESQI_BD_BUF_LEN_MAX 256
144 #define PESQI_BD_COUNT 256 /* max 64KB data per spi message */
145
146 struct pic32_sqi {
147 void __iomem *regs;
148 struct clk *sys_clk;
149 struct clk *base_clk; /* drives spi clock */
150 struct spi_master *master;
151 int irq;
152 struct completion xfer_done;
153 struct ring_desc *ring;
154 void *bd;
155 dma_addr_t bd_dma;
156 struct list_head bd_list_free; /* free */
157 struct list_head bd_list_used; /* allocated */
158 struct spi_device *cur_spi;
159 u32 cur_speed;
160 u8 cur_mode;
161 };
162
163 static inline void pic32_setbits(void __iomem *reg, u32 set)
164 {
165 writel(readl(reg) | set, reg);
166 }
167
168 static inline void pic32_clrbits(void __iomem *reg, u32 clr)
169 {
170 writel(readl(reg) & ~clr, reg);
171 }
172
173 static int pic32_sqi_set_clk_rate(struct pic32_sqi *sqi, u32 sck)
174 {
175 u32 val, div;
176
177 /* div = base_clk / (2 * spi_clk) */
178 div = clk_get_rate(sqi->base_clk) / (2 * sck);
179 div &= PESQI_CLKDIV;
180
181 val = readl(sqi->regs + PESQI_CLK_CTRL_REG);
182 /* apply new divider */
183 val &= ~(PESQI_CLK_STABLE | (PESQI_CLKDIV << PESQI_CLKDIV_SHIFT));
184 val |= div << PESQI_CLKDIV_SHIFT;
185 writel(val, sqi->regs + PESQI_CLK_CTRL_REG);
186
187 /* wait for stability */
188 return readl_poll_timeout(sqi->regs + PESQI_CLK_CTRL_REG, val,
189 val & PESQI_CLK_STABLE, 1, 5000);
190 }
191
192 static inline void pic32_sqi_enable_int(struct pic32_sqi *sqi)
193 {
194 u32 mask = PESQI_DMAERR | PESQI_BDDONE | PESQI_PKTCOMP;
195
196 writel(mask, sqi->regs + PESQI_INT_ENABLE_REG);
197 /* INT_SIGEN works as interrupt-gate to INTR line */
198 writel(mask, sqi->regs + PESQI_INT_SIGEN_REG);
199 }
200
201 static inline void pic32_sqi_disable_int(struct pic32_sqi *sqi)
202 {
203 writel(0, sqi->regs + PESQI_INT_ENABLE_REG);
204 writel(0, sqi->regs + PESQI_INT_SIGEN_REG);
205 }
206
207 static irqreturn_t pic32_sqi_isr(int irq, void *dev_id)
208 {
209 struct pic32_sqi *sqi = dev_id;
210 u32 enable, status;
211
212 enable = readl(sqi->regs + PESQI_INT_ENABLE_REG);
213 status = readl(sqi->regs + PESQI_INT_STAT_REG);
214
215 /* check spurious interrupt */
216 if (!status)
217 return IRQ_NONE;
218
219 if (status & PESQI_DMAERR) {
220 enable = 0;
221 goto irq_done;
222 }
223
224 if (status & PESQI_TXTHR)
225 enable &= ~(PESQI_TXTHR | PESQI_TXFULL | PESQI_TXEMPTY);
226
227 if (status & PESQI_RXTHR)
228 enable &= ~(PESQI_RXTHR | PESQI_RXFULL | PESQI_RXEMPTY);
229
230 if (status & PESQI_BDDONE)
231 enable &= ~PESQI_BDDONE;
232
233 /* packet processing completed */
234 if (status & PESQI_PKTCOMP) {
235 /* mask all interrupts */
236 enable = 0;
237 /* complete trasaction */
238 complete(&sqi->xfer_done);
239 }
240
241 irq_done:
242 /* interrupts are sticky, so mask when handled */
243 writel(enable, sqi->regs + PESQI_INT_ENABLE_REG);
244
245 return IRQ_HANDLED;
246 }
247
248 static struct ring_desc *ring_desc_get(struct pic32_sqi *sqi)
249 {
250 struct ring_desc *rdesc;
251
252 if (list_empty(&sqi->bd_list_free))
253 return NULL;
254
255 rdesc = list_first_entry(&sqi->bd_list_free, struct ring_desc, list);
256 list_move_tail(&rdesc->list, &sqi->bd_list_used);
257 return rdesc;
258 }
259
260 static void ring_desc_put(struct pic32_sqi *sqi, struct ring_desc *rdesc)
261 {
262 list_move(&rdesc->list, &sqi->bd_list_free);
263 }
264
265 static int pic32_sqi_one_transfer(struct pic32_sqi *sqi,
266 struct spi_message *mesg,
267 struct spi_transfer *xfer)
268 {
269 struct spi_device *spi = mesg->spi;
270 struct scatterlist *sg, *sgl;
271 struct ring_desc *rdesc;
272 struct buf_desc *bd;
273 int nents, i;
274 u32 bd_ctrl;
275 u32 nbits;
276
277 /* Device selection */
278 bd_ctrl = spi->chip_select << BD_DEVSEL_SHIFT;
279
280 /* half-duplex: select transfer buffer, direction and lane */
281 if (xfer->rx_buf) {
282 bd_ctrl |= BD_DATA_RECV;
283 nbits = xfer->rx_nbits;
284 sgl = xfer->rx_sg.sgl;
285 nents = xfer->rx_sg.nents;
286 } else {
287 nbits = xfer->tx_nbits;
288 sgl = xfer->tx_sg.sgl;
289 nents = xfer->tx_sg.nents;
290 }
291
292 if (nbits & SPI_NBITS_QUAD)
293 bd_ctrl |= BD_QUAD;
294 else if (nbits & SPI_NBITS_DUAL)
295 bd_ctrl |= BD_DUAL;
296
297 /* LSB first */
298 if (spi->mode & SPI_LSB_FIRST)
299 bd_ctrl |= BD_LSBF;
300
301 /* ownership to hardware */
302 bd_ctrl |= BD_EN;
303
304 for_each_sg(sgl, sg, nents, i) {
305 /* get ring descriptor */
306 rdesc = ring_desc_get(sqi);
307 if (!rdesc)
308 break;
309
310 bd = rdesc->bd;
311
312 /* BD CTRL: length */
313 rdesc->xfer_len = sg_dma_len(sg);
314 bd->bd_ctrl = bd_ctrl;
315 bd->bd_ctrl |= rdesc->xfer_len;
316
317 /* BD STAT */
318 bd->bd_status = 0;
319
320 /* BD BUFFER ADDRESS */
321 bd->bd_addr = sg->dma_address;
322 }
323
324 return 0;
325 }
326
327 static int pic32_sqi_prepare_hardware(struct spi_master *master)
328 {
329 struct pic32_sqi *sqi = spi_master_get_devdata(master);
330
331 /* enable spi interface */
332 pic32_setbits(sqi->regs + PESQI_CONF_REG, PESQI_EN);
333 /* enable spi clk */
334 pic32_setbits(sqi->regs + PESQI_CLK_CTRL_REG, PESQI_CLK_EN);
335
336 return 0;
337 }
338
339 static bool pic32_sqi_can_dma(struct spi_master *master,
340 struct spi_device *spi,
341 struct spi_transfer *x)
342 {
343 /* Do DMA irrespective of transfer size */
344 return true;
345 }
346
347 static int pic32_sqi_one_message(struct spi_master *master,
348 struct spi_message *msg)
349 {
350 struct spi_device *spi = msg->spi;
351 struct ring_desc *rdesc, *next;
352 struct spi_transfer *xfer;
353 struct pic32_sqi *sqi;
354 int ret = 0, mode;
355 unsigned long timeout;
356 u32 val;
357
358 sqi = spi_master_get_devdata(master);
359
360 reinit_completion(&sqi->xfer_done);
361 msg->actual_length = 0;
362
363 /* We can't handle spi_transfer specific "speed_hz", "bits_per_word"
364 * and "delay_usecs". But spi_device specific speed and mode change
365 * can be handled at best during spi chip-select switch.
366 */
367 if (sqi->cur_spi != spi) {
368 /* set spi speed */
369 if (sqi->cur_speed != spi->max_speed_hz) {
370 sqi->cur_speed = spi->max_speed_hz;
371 ret = pic32_sqi_set_clk_rate(sqi, spi->max_speed_hz);
372 if (ret)
373 dev_warn(&spi->dev, "set_clk, %d\n", ret);
374 }
375
376 /* set spi mode */
377 mode = spi->mode & (SPI_MODE_3 | SPI_LSB_FIRST);
378 if (sqi->cur_mode != mode) {
379 val = readl(sqi->regs + PESQI_CONF_REG);
380 val &= ~(PESQI_CPOL | PESQI_CPHA | PESQI_LSBF);
381 if (mode & SPI_CPOL)
382 val |= PESQI_CPOL;
383 if (mode & SPI_LSB_FIRST)
384 val |= PESQI_LSBF;
385 val |= PESQI_CPHA;
386 writel(val, sqi->regs + PESQI_CONF_REG);
387
388 sqi->cur_mode = mode;
389 }
390 sqi->cur_spi = spi;
391 }
392
393 /* prepare hardware desc-list(BD) for transfer(s) */
394 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
395 ret = pic32_sqi_one_transfer(sqi, msg, xfer);
396 if (ret) {
397 dev_err(&spi->dev, "xfer %p err\n", xfer);
398 goto xfer_out;
399 }
400 }
401
402 /* BDs are prepared and chained. Now mark LAST_BD, CS_DEASSERT at last
403 * element of the list.
404 */
405 rdesc = list_last_entry(&sqi->bd_list_used, struct ring_desc, list);
406 rdesc->bd->bd_ctrl |= BD_LAST | BD_CS_DEASSERT |
407 BD_LIFM | BD_PKT_INT_EN;
408
409 /* set base address BD list for DMA engine */
410 rdesc = list_first_entry(&sqi->bd_list_used, struct ring_desc, list);
411 writel(rdesc->bd_dma, sqi->regs + PESQI_BD_BASE_ADDR_REG);
412
413 /* enable interrupt */
414 pic32_sqi_enable_int(sqi);
415
416 /* enable DMA engine */
417 val = PESQI_DMA_EN | PESQI_POLL_EN | PESQI_BDP_START;
418 writel(val, sqi->regs + PESQI_BD_CTRL_REG);
419
420 /* wait for xfer completion */
421 timeout = wait_for_completion_timeout(&sqi->xfer_done, 5 * HZ);
422 if (timeout == 0) {
423 dev_err(&sqi->master->dev, "wait timedout/interrupted\n");
424 ret = -ETIMEDOUT;
425 msg->status = ret;
426 } else {
427 /* success */
428 msg->status = 0;
429 ret = 0;
430 }
431
432 /* disable DMA */
433 writel(0, sqi->regs + PESQI_BD_CTRL_REG);
434
435 pic32_sqi_disable_int(sqi);
436
437 xfer_out:
438 list_for_each_entry_safe_reverse(rdesc, next,
439 &sqi->bd_list_used, list) {
440 /* Update total byte transferred */
441 msg->actual_length += rdesc->xfer_len;
442 /* release ring descr */
443 ring_desc_put(sqi, rdesc);
444 }
445 spi_finalize_current_message(spi->master);
446
447 return ret;
448 }
449
450 static int pic32_sqi_unprepare_hardware(struct spi_master *master)
451 {
452 struct pic32_sqi *sqi = spi_master_get_devdata(master);
453
454 /* disable clk */
455 pic32_clrbits(sqi->regs + PESQI_CLK_CTRL_REG, PESQI_CLK_EN);
456 /* disable spi */
457 pic32_clrbits(sqi->regs + PESQI_CONF_REG, PESQI_EN);
458
459 return 0;
460 }
461
462 static int ring_desc_ring_alloc(struct pic32_sqi *sqi)
463 {
464 struct ring_desc *rdesc;
465 struct buf_desc *bd;
466 int i;
467
468 /* allocate coherent DMAable memory for hardware buffer descriptors. */
469 sqi->bd = dma_alloc_coherent(&sqi->master->dev,
470 sizeof(*bd) * PESQI_BD_COUNT,
471 &sqi->bd_dma, GFP_KERNEL);
472 if (!sqi->bd) {
473 dev_err(&sqi->master->dev, "failed allocating dma buffer\n");
474 return -ENOMEM;
475 }
476
477 /* allocate software ring descriptors */
478 sqi->ring = kcalloc(PESQI_BD_COUNT, sizeof(*rdesc), GFP_KERNEL);
479 if (!sqi->ring) {
480 dma_free_coherent(&sqi->master->dev,
481 sizeof(*bd) * PESQI_BD_COUNT,
482 sqi->bd, sqi->bd_dma);
483 return -ENOMEM;
484 }
485
486 bd = (struct buf_desc *)sqi->bd;
487
488 INIT_LIST_HEAD(&sqi->bd_list_free);
489 INIT_LIST_HEAD(&sqi->bd_list_used);
490
491 /* initialize ring-desc */
492 for (i = 0, rdesc = sqi->ring; i < PESQI_BD_COUNT; i++, rdesc++) {
493 INIT_LIST_HEAD(&rdesc->list);
494 rdesc->bd = &bd[i];
495 rdesc->bd_dma = sqi->bd_dma + (void *)&bd[i] - (void *)bd;
496 list_add_tail(&rdesc->list, &sqi->bd_list_free);
497 }
498
499 /* Prepare BD: chain to next BD(s) */
500 for (i = 0, rdesc = sqi->ring; i < PESQI_BD_COUNT - 1; i++)
501 bd[i].bd_nextp = rdesc[i + 1].bd_dma;
502 bd[PESQI_BD_COUNT - 1].bd_nextp = 0;
503
504 return 0;
505 }
506
507 static void ring_desc_ring_free(struct pic32_sqi *sqi)
508 {
509 dma_free_coherent(&sqi->master->dev,
510 sizeof(struct buf_desc) * PESQI_BD_COUNT,
511 sqi->bd, sqi->bd_dma);
512 kfree(sqi->ring);
513 }
514
515 static void pic32_sqi_hw_init(struct pic32_sqi *sqi)
516 {
517 unsigned long flags;
518 u32 val;
519
520 /* Soft-reset of PESQI controller triggers interrupt.
521 * We are not yet ready to handle them so disable CPU
522 * interrupt for the time being.
523 */
524 local_irq_save(flags);
525
526 /* assert soft-reset */
527 writel(PESQI_SOFT_RESET, sqi->regs + PESQI_CONF_REG);
528
529 /* wait until clear */
530 readl_poll_timeout_atomic(sqi->regs + PESQI_CONF_REG, val,
531 !(val & PESQI_SOFT_RESET), 1, 5000);
532
533 /* disable all interrupts */
534 pic32_sqi_disable_int(sqi);
535
536 /* Now it is safe to enable back CPU interrupt */
537 local_irq_restore(flags);
538
539 /* tx and rx fifo interrupt threshold */
540 val = readl(sqi->regs + PESQI_CMD_THRES_REG);
541 val &= ~(PESQI_TXTHR_MASK << PESQI_TXTHR_SHIFT);
542 val &= ~(PESQI_RXTHR_MASK << PESQI_RXTHR_SHIFT);
543 val |= (1U << PESQI_TXTHR_SHIFT) | (1U << PESQI_RXTHR_SHIFT);
544 writel(val, sqi->regs + PESQI_CMD_THRES_REG);
545
546 val = readl(sqi->regs + PESQI_INT_THRES_REG);
547 val &= ~(PESQI_TXTHR_MASK << PESQI_TXTHR_SHIFT);
548 val &= ~(PESQI_RXTHR_MASK << PESQI_RXTHR_SHIFT);
549 val |= (1U << PESQI_TXTHR_SHIFT) | (1U << PESQI_RXTHR_SHIFT);
550 writel(val, sqi->regs + PESQI_INT_THRES_REG);
551
552 /* default configuration */
553 val = readl(sqi->regs + PESQI_CONF_REG);
554
555 /* set mode: DMA */
556 val &= ~PESQI_MODE;
557 val |= PESQI_MODE_DMA << PESQI_MODE_SHIFT;
558 writel(val, sqi->regs + PESQI_CONF_REG);
559
560 /* DATAEN - SQIID0-ID3 */
561 val |= PESQI_QUAD_LANE << PESQI_LANES_SHIFT;
562
563 /* burst/INCR4 enable */
564 val |= PESQI_BURST_EN;
565
566 /* CSEN - all CS */
567 val |= 3U << PESQI_CSEN_SHIFT;
568 writel(val, sqi->regs + PESQI_CONF_REG);
569
570 /* write poll count */
571 writel(0, sqi->regs + PESQI_BD_POLL_CTRL_REG);
572
573 sqi->cur_speed = 0;
574 sqi->cur_mode = -1;
575 }
576
577 static int pic32_sqi_probe(struct platform_device *pdev)
578 {
579 struct spi_master *master;
580 struct pic32_sqi *sqi;
581 struct resource *reg;
582 int ret;
583
584 master = spi_alloc_master(&pdev->dev, sizeof(*sqi));
585 if (!master)
586 return -ENOMEM;
587
588 sqi = spi_master_get_devdata(master);
589 sqi->master = master;
590
591 reg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
592 sqi->regs = devm_ioremap_resource(&pdev->dev, reg);
593 if (IS_ERR(sqi->regs)) {
594 ret = PTR_ERR(sqi->regs);
595 goto err_free_master;
596 }
597
598 /* irq */
599 sqi->irq = platform_get_irq(pdev, 0);
600 if (sqi->irq < 0) {
601 dev_err(&pdev->dev, "no irq found\n");
602 ret = sqi->irq;
603 goto err_free_master;
604 }
605
606 /* clocks */
607 sqi->sys_clk = devm_clk_get(&pdev->dev, "reg_ck");
608 if (IS_ERR(sqi->sys_clk)) {
609 ret = PTR_ERR(sqi->sys_clk);
610 dev_err(&pdev->dev, "no sys_clk ?\n");
611 goto err_free_master;
612 }
613
614 sqi->base_clk = devm_clk_get(&pdev->dev, "spi_ck");
615 if (IS_ERR(sqi->base_clk)) {
616 ret = PTR_ERR(sqi->base_clk);
617 dev_err(&pdev->dev, "no base clk ?\n");
618 goto err_free_master;
619 }
620
621 ret = clk_prepare_enable(sqi->sys_clk);
622 if (ret) {
623 dev_err(&pdev->dev, "sys clk enable failed\n");
624 goto err_free_master;
625 }
626
627 ret = clk_prepare_enable(sqi->base_clk);
628 if (ret) {
629 dev_err(&pdev->dev, "base clk enable failed\n");
630 clk_disable_unprepare(sqi->sys_clk);
631 goto err_free_master;
632 }
633
634 init_completion(&sqi->xfer_done);
635
636 /* initialize hardware */
637 pic32_sqi_hw_init(sqi);
638
639 /* allocate buffers & descriptors */
640 ret = ring_desc_ring_alloc(sqi);
641 if (ret) {
642 dev_err(&pdev->dev, "ring alloc failed\n");
643 goto err_disable_clk;
644 }
645
646 /* install irq handlers */
647 ret = request_irq(sqi->irq, pic32_sqi_isr, 0,
648 dev_name(&pdev->dev), sqi);
649 if (ret < 0) {
650 dev_err(&pdev->dev, "request_irq(%d), failed\n", sqi->irq);
651 goto err_free_ring;
652 }
653
654 /* register master */
655 master->num_chipselect = 2;
656 master->max_speed_hz = clk_get_rate(sqi->base_clk);
657 master->dma_alignment = 32;
658 master->max_dma_len = PESQI_BD_BUF_LEN_MAX;
659 master->dev.of_node = pdev->dev.of_node;
660 master->mode_bits = SPI_MODE_3 | SPI_MODE_0 | SPI_TX_DUAL |
661 SPI_RX_DUAL | SPI_TX_QUAD | SPI_RX_QUAD;
662 master->flags = SPI_MASTER_HALF_DUPLEX;
663 master->can_dma = pic32_sqi_can_dma;
664 master->bits_per_word_mask = SPI_BPW_RANGE_MASK(8, 32);
665 master->transfer_one_message = pic32_sqi_one_message;
666 master->prepare_transfer_hardware = pic32_sqi_prepare_hardware;
667 master->unprepare_transfer_hardware = pic32_sqi_unprepare_hardware;
668
669 ret = devm_spi_register_master(&pdev->dev, master);
670 if (ret) {
671 dev_err(&master->dev, "failed registering spi master\n");
672 free_irq(sqi->irq, sqi);
673 goto err_free_ring;
674 }
675
676 platform_set_drvdata(pdev, sqi);
677
678 return 0;
679
680 err_free_ring:
681 ring_desc_ring_free(sqi);
682
683 err_disable_clk:
684 clk_disable_unprepare(sqi->base_clk);
685 clk_disable_unprepare(sqi->sys_clk);
686
687 err_free_master:
688 spi_master_put(master);
689 return ret;
690 }
691
692 static int pic32_sqi_remove(struct platform_device *pdev)
693 {
694 struct pic32_sqi *sqi = platform_get_drvdata(pdev);
695
696 /* release resources */
697 free_irq(sqi->irq, sqi);
698 ring_desc_ring_free(sqi);
699
700 /* disable clk */
701 clk_disable_unprepare(sqi->base_clk);
702 clk_disable_unprepare(sqi->sys_clk);
703
704 return 0;
705 }
706
707 static const struct of_device_id pic32_sqi_of_ids[] = {
708 {.compatible = "microchip,pic32mzda-sqi",},
709 {},
710 };
711 MODULE_DEVICE_TABLE(of, pic32_sqi_of_ids);
712
713 static struct platform_driver pic32_sqi_driver = {
714 .driver = {
715 .name = "sqi-pic32",
716 .of_match_table = of_match_ptr(pic32_sqi_of_ids),
717 },
718 .probe = pic32_sqi_probe,
719 .remove = pic32_sqi_remove,
720 };
721
722 module_platform_driver(pic32_sqi_driver);
723
724 MODULE_AUTHOR("Purna Chandra Mandal <purna.mandal@microchip.com>");
725 MODULE_DESCRIPTION("Microchip SPI driver for PIC32 SQI controller.");
726 MODULE_LICENSE("GPL v2");
Linux with added FPC-III support