drivers/ata/pata_cs5535.c

   1 /*
   2  * pata-cs5535.c        - CS5535 PATA for new ATA layer
   3  *                        (C) 2005-2006 Red Hat Inc
   4  *                        Alan Cox <alan@lxorguk.ukuu.org.uk>
   5  *
   6  * based upon cs5535.c from AMD <Jens.Altmann@amd.com> as cleaned up and
   7  * made readable and Linux style by Wolfgang Zuleger <wolfgang.zuleger@gmx.de>
   8  * and Alexander Kiausch <alex.kiausch@t-online.de>
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  22  *
  23  * Loosely based on the piix & svwks drivers.
  24  *
  25  * Documentation:
  26  *      Available from AMD web site.
  27  * TODO
  28  *      Review errata to see if serializing is necessary
  29  */
  30
  31 #include <linux/kernel.h>
  32 #include <linux/module.h>
  33 #include <linux/pci.h>
  34 #include <linux/init.h>
  35 #include <linux/blkdev.h>
  36 #include <linux/delay.h>
  37 #include <scsi/scsi_host.h>
  38 #include <linux/libata.h>
  39 #include <asm/msr.h>
  40
  41 #define DRV_NAME        "pata_cs5535"
  42 #define DRV_VERSION     "0.2.12"
  43
  44 /*
  45  *      The Geode (Aka Athlon GX now) uses an internal MSR based
  46  *      bus system for control. Demented but there you go.
  47  */
  48
  49 #define MSR_ATAC_BASE           0x51300000
  50 #define ATAC_GLD_MSR_CAP        (MSR_ATAC_BASE+0)
  51 #define ATAC_GLD_MSR_CONFIG    (MSR_ATAC_BASE+0x01)
  52 #define ATAC_GLD_MSR_SMI       (MSR_ATAC_BASE+0x02)
  53 #define ATAC_GLD_MSR_ERROR     (MSR_ATAC_BASE+0x03)
  54 #define ATAC_GLD_MSR_PM        (MSR_ATAC_BASE+0x04)
  55 #define ATAC_GLD_MSR_DIAG      (MSR_ATAC_BASE+0x05)
  56 #define ATAC_IO_BAR            (MSR_ATAC_BASE+0x08)
  57 #define ATAC_RESET             (MSR_ATAC_BASE+0x10)
  58 #define ATAC_CH0D0_PIO         (MSR_ATAC_BASE+0x20)
  59 #define ATAC_CH0D0_DMA         (MSR_ATAC_BASE+0x21)
  60 #define ATAC_CH0D1_PIO         (MSR_ATAC_BASE+0x22)
  61 #define ATAC_CH0D1_DMA         (MSR_ATAC_BASE+0x23)
  62 #define ATAC_PCI_ABRTERR       (MSR_ATAC_BASE+0x24)
  63
  64 #define ATAC_BM0_CMD_PRIM      0x00
  65 #define ATAC_BM0_STS_PRIM      0x02
  66 #define ATAC_BM0_PRD           0x04
  67
  68 #define CS5535_CABLE_DETECT    0x48
  69
  70 /**
  71  *      cs5535_cable_detect     -       detect cable type
  72  *      @ap: Port to detect on
  73  *
  74  *      Perform cable detection for ATA66 capable cable. Return a libata
  75  *      cable type.
  76  */
  77
  78 static int cs5535_cable_detect(struct ata_port *ap)
  79 {
  80         u8 cable;
  81         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
  82
  83         pci_read_config_byte(pdev, CS5535_CABLE_DETECT, &cable);
  84         if (cable & 1)
  85                 return ATA_CBL_PATA80;
  86         else
  87                 return ATA_CBL_PATA40;
  88 }
  89
  90 /**
  91  *      cs5535_set_piomode              -       PIO setup
  92  *      @ap: ATA interface
  93  *      @adev: device on the interface
  94  *
  95  *      Set our PIO requirements. The CS5535 is pretty clean about all this
  96  */
  97
  98 static void cs5535_set_piomode(struct ata_port *ap, struct ata_device *adev)
  99 {
 100         static const u16 pio_timings[5] = {
 101                 0xF7F4, 0xF173, 0x8141, 0x5131, 0x1131
 102         };
 103         static const u16 pio_cmd_timings[5] = {
 104                 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131
 105         };
 106         u32 reg, dummy;
 107         struct ata_device *pair = ata_dev_pair(adev);
 108
 109         int mode = adev->pio_mode - XFER_PIO_0;
 110         int cmdmode = mode;
 111
 112         /* Command timing has to be for the lowest of the pair of devices */
 113         if (pair) {
 114                 int pairmode = pair->pio_mode - XFER_PIO_0;
 115                 cmdmode = min(mode, pairmode);
 116                 /* Write the other drive timing register if it changed */
 117                 if (cmdmode < pairmode)
 118                         wrmsr(ATAC_CH0D0_PIO + 2 * pair->devno,
 119                                 pio_cmd_timings[cmdmode] << 16 | pio_timings[pairmode], 0);
 120         }
 121         /* Write the drive timing register */
 122         wrmsr(ATAC_CH0D0_PIO + 2 * adev->devno,
 123                 pio_cmd_timings[cmdmode] << 16 | pio_timings[mode], 0);
 124
 125         /* Set the PIO "format 1" bit in the DMA timing register */
 126         rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy);
 127         wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg | 0x80000000UL, 0);
 128 }
 129
 130 /**
 131  *      cs5535_set_dmamode              -       DMA timing setup
 132  *      @ap: ATA interface
 133  *      @adev: Device being configured
 134  *
 135  */
 136
 137 static void cs5535_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 138 {
 139         static const u32 udma_timings[5] = {
 140                 0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061
 141         };
 142         static const u32 mwdma_timings[3] = {
 143                 0x7F0FFFF3, 0x7F035352, 0x7F024241
 144         };
 145         u32 reg, dummy;
 146         int mode = adev->dma_mode;
 147
 148         rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy);
 149         reg &= 0x80000000UL;
 150         if (mode >= XFER_UDMA_0)
 151                 reg |= udma_timings[mode - XFER_UDMA_0];
 152         else
 153                 reg |= mwdma_timings[mode - XFER_MW_DMA_0];
 154         wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, 0);
 155 }
 156
 157 static struct scsi_host_template cs5535_sht = {
 158         ATA_BMDMA_SHT(DRV_NAME),
 159 };
 160
 161 static struct ata_port_operations cs5535_port_ops = {
 162         .inherits       = &ata_bmdma_port_ops,
 163         .cable_detect   = cs5535_cable_detect,
 164         .set_piomode    = cs5535_set_piomode,
 165         .set_dmamode    = cs5535_set_dmamode,
 166 };
 167
 168 /**
 169  *      cs5535_init_one         -       Initialise a CS5530
 170  *      @dev: PCI device
 171  *      @id: Entry in match table
 172  *
 173  *      Install a driver for the newly found CS5530 companion chip. Most of
 174  *      this is just housekeeping. We have to set the chip up correctly and
 175  *      turn off various bits of emulation magic.
 176  */
 177
 178 static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 179 {
 180         static const struct ata_port_info info = {
 181                 .flags = ATA_FLAG_SLAVE_POSS,
 182                 .pio_mask = ATA_PIO4,
 183                 .mwdma_mask = ATA_MWDMA2,
 184                 .udma_mask = ATA_UDMA4,
 185                 .port_ops = &cs5535_port_ops
 186         };
 187         const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
 188
 189         return ata_pci_bmdma_init_one(dev, ppi, &cs5535_sht, NULL, 0);
 190 }
 191
 192 static const struct pci_device_id cs5535[] = {
 193         { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_CS5535_IDE), },
 194         { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5535_IDE), },
 195
 196         { },
 197 };
 198
 199 static struct pci_driver cs5535_pci_driver = {
 200         .name           = DRV_NAME,
 201         .id_table       = cs5535,
 202         .probe          = cs5535_init_one,
 203         .remove         = ata_pci_remove_one,
 204 #ifdef CONFIG_PM
 205         .suspend        = ata_pci_device_suspend,
 206         .resume         = ata_pci_device_resume,
 207 #endif
 208 };
 209
 210 module_pci_driver(cs5535_pci_driver);
 211
 212 MODULE_AUTHOR("Alan Cox, Jens Altmann, Wolfgan Zuleger, Alexander Kiausch");
 213 MODULE_DESCRIPTION("low-level driver for the NS/AMD 5535");
 214 MODULE_LICENSE("GPL");
 215 MODULE_DEVICE_TABLE(pci, cs5535);
 216 MODULE_VERSION(DRV_VERSION);