?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
bna: remove oper_state_cbfn from struct bna_rxf
[linux/fpc-iii.git] / drivers / mfd / omap-usb-tll.c
blobb7b3e8ee64f26a70cf9a494b929aaab9e3218852
1 /**
2 * omap-usb-tll.c - The USB TLL driver for OMAP EHCI & OHCI
3 *
4 * Copyright (C) 2012-2013 Texas Instruments Incorporated - http://www.ti.com
5 * Author: Keshava Munegowda <keshava_mgowda@ti.com>
6 * Author: Roger Quadros <rogerq@ti.com>
7 *
8 * This program is free software: you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 of
10 * the License as published by the Free Software Foundation.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program. If not, see <http://www.gnu.org/licenses/>.
19 */
20 #include <linux/kernel.h>
21 #include <linux/module.h>
22 #include <linux/types.h>
23 #include <linux/slab.h>
24 #include <linux/spinlock.h>
25 #include <linux/platform_device.h>
26 #include <linux/clk.h>
27 #include <linux/io.h>
28 #include <linux/err.h>
29 #include <linux/pm_runtime.h>
30 #include <linux/platform_data/usb-omap.h>
31 #include <linux/of.h>
32
33 #define USBTLL_DRIVER_NAME "usbhs_tll"
34
35 /* TLL Register Set */
36 #define OMAP_USBTLL_REVISION (0x00)
37 #define OMAP_USBTLL_SYSCONFIG (0x10)
38 #define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8)
39 #define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3)
40 #define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2)
41 #define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1)
42 #define OMAP_USBTLL_SYSCONFIG_AUTOIDLE (1 << 0)
43
44 #define OMAP_USBTLL_SYSSTATUS (0x14)
45 #define OMAP_USBTLL_SYSSTATUS_RESETDONE (1 << 0)
46
47 #define OMAP_USBTLL_IRQSTATUS (0x18)
48 #define OMAP_USBTLL_IRQENABLE (0x1C)
49
50 #define OMAP_TLL_SHARED_CONF (0x30)
51 #define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN (1 << 6)
52 #define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN (1 << 5)
53 #define OMAP_TLL_SHARED_CONF_USB_DIVRATION (1 << 2)
54 #define OMAP_TLL_SHARED_CONF_FCLK_REQ (1 << 1)
55 #define OMAP_TLL_SHARED_CONF_FCLK_IS_ON (1 << 0)
56
57 #define OMAP_TLL_CHANNEL_CONF(num) (0x040 + 0x004 * num)
58 #define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT 24
59 #define OMAP_TLL_CHANNEL_CONF_DRVVBUS (1 << 16)
60 #define OMAP_TLL_CHANNEL_CONF_CHRGVBUS (1 << 15)
61 #define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11)
62 #define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE (1 << 10)
63 #define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE (1 << 9)
64 #define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE (1 << 8)
65 #define OMAP_TLL_CHANNEL_CONF_MODE_TRANSPARENT_UTMI (2 << 1)
66 #define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS (1 << 1)
67 #define OMAP_TLL_CHANNEL_CONF_CHANEN (1 << 0)
68
69 #define OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0 0x0
70 #define OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM 0x1
71 #define OMAP_TLL_FSLSMODE_3PIN_PHY 0x2
72 #define OMAP_TLL_FSLSMODE_4PIN_PHY 0x3
73 #define OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0 0x4
74 #define OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM 0x5
75 #define OMAP_TLL_FSLSMODE_3PIN_TLL 0x6
76 #define OMAP_TLL_FSLSMODE_4PIN_TLL 0x7
77 #define OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0 0xA
78 #define OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM 0xB
79
80 #define OMAP_TLL_ULPI_FUNCTION_CTRL(num) (0x804 + 0x100 * num)
81 #define OMAP_TLL_ULPI_INTERFACE_CTRL(num) (0x807 + 0x100 * num)
82 #define OMAP_TLL_ULPI_OTG_CTRL(num) (0x80A + 0x100 * num)
83 #define OMAP_TLL_ULPI_INT_EN_RISE(num) (0x80D + 0x100 * num)
84 #define OMAP_TLL_ULPI_INT_EN_FALL(num) (0x810 + 0x100 * num)
85 #define OMAP_TLL_ULPI_INT_STATUS(num) (0x813 + 0x100 * num)
86 #define OMAP_TLL_ULPI_INT_LATCH(num) (0x814 + 0x100 * num)
87 #define OMAP_TLL_ULPI_DEBUG(num) (0x815 + 0x100 * num)
88 #define OMAP_TLL_ULPI_SCRATCH_REGISTER(num) (0x816 + 0x100 * num)
89
90 #define OMAP_REV2_TLL_CHANNEL_COUNT 2
91 #define OMAP_TLL_CHANNEL_COUNT 3
92 #define OMAP_TLL_CHANNEL_1_EN_MASK (1 << 0)
93 #define OMAP_TLL_CHANNEL_2_EN_MASK (1 << 1)
94 #define OMAP_TLL_CHANNEL_3_EN_MASK (1 << 2)
95
96 /* Values of USBTLL_REVISION - Note: these are not given in the TRM */
97 #define OMAP_USBTLL_REV1 0x00000015 /* OMAP3 */
98 #define OMAP_USBTLL_REV2 0x00000018 /* OMAP 3630 */
99 #define OMAP_USBTLL_REV3 0x00000004 /* OMAP4 */
100 #define OMAP_USBTLL_REV4 0x00000006 /* OMAP5 */
101
102 #define is_ehci_tll_mode(x) (x == OMAP_EHCI_PORT_MODE_TLL)
103
104 /* only PHY and UNUSED modes don't need TLL */
105 #define omap_usb_mode_needs_tll(x) ((x) != OMAP_USBHS_PORT_MODE_UNUSED &&\
106 (x) != OMAP_EHCI_PORT_MODE_PHY)
107
108 struct usbtll_omap {
109 int nch; /* num. of channels */
110 struct clk **ch_clk;
111 void __iomem *base;
112 };
113
114 /*-------------------------------------------------------------------------*/
115
116 static const char usbtll_driver_name[] = USBTLL_DRIVER_NAME;
117 static struct device *tll_dev;
118 static DEFINE_SPINLOCK(tll_lock); /* serialize access to tll_dev */
119
120 /*-------------------------------------------------------------------------*/
121
122 static inline void usbtll_write(void __iomem *base, u32 reg, u32 val)
123 {
124 writel_relaxed(val, base + reg);
125 }
126
127 static inline u32 usbtll_read(void __iomem *base, u32 reg)
128 {
129 return readl_relaxed(base + reg);
130 }
131
132 static inline void usbtll_writeb(void __iomem *base, u8 reg, u8 val)
133 {
134 writeb_relaxed(val, base + reg);
135 }
136
137 static inline u8 usbtll_readb(void __iomem *base, u8 reg)
138 {
139 return readb_relaxed(base + reg);
140 }
141
142 /*-------------------------------------------------------------------------*/
143
144 static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
145 {
146 switch (pmode) {
147 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
148 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
149 case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
150 case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
151 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
152 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
153 case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
154 case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
155 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
156 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
157 return true;
158
159 default:
160 return false;
161 }
162 }
163
164 /*
165 * convert the port-mode enum to a value we can use in the FSLSMODE
166 * field of USBTLL_CHANNEL_CONF
167 */
168 static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode)
169 {
170 switch (mode) {
171 case OMAP_USBHS_PORT_MODE_UNUSED:
172 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
173 return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;
174
175 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
176 return OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM;
177
178 case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
179 return OMAP_TLL_FSLSMODE_3PIN_PHY;
180
181 case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
182 return OMAP_TLL_FSLSMODE_4PIN_PHY;
183
184 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
185 return OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0;
186
187 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
188 return OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM;
189
190 case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
191 return OMAP_TLL_FSLSMODE_3PIN_TLL;
192
193 case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
194 return OMAP_TLL_FSLSMODE_4PIN_TLL;
195
196 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
197 return OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0;
198
199 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
200 return OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM;
201 default:
202 pr_warn("Invalid port mode, using default\n");
203 return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;
204 }
205 }
206
207 /**
208 * usbtll_omap_probe - initialize TI-based HCDs
209 *
210 * Allocates basic resources for this USB host controller.
211 */
212 static int usbtll_omap_probe(struct platform_device *pdev)
213 {
214 struct device *dev = &pdev->dev;
215 struct resource *res;
216 struct usbtll_omap *tll;
217 int ret = 0;
218 int i, ver;
219
220 dev_dbg(dev, "starting TI HSUSB TLL Controller\n");
221
222 tll = devm_kzalloc(dev, sizeof(struct usbtll_omap), GFP_KERNEL);
223 if (!tll) {
224 dev_err(dev, "Memory allocation failed\n");
225 return -ENOMEM;
226 }
227
228 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
229 tll->base = devm_ioremap_resource(dev, res);
230 if (IS_ERR(tll->base))
231 return PTR_ERR(tll->base);
232
233 platform_set_drvdata(pdev, tll);
234 pm_runtime_enable(dev);
235 pm_runtime_get_sync(dev);
236
237 ver = usbtll_read(tll->base, OMAP_USBTLL_REVISION);
238 switch (ver) {
239 case OMAP_USBTLL_REV1:
240 case OMAP_USBTLL_REV4:
241 tll->nch = OMAP_TLL_CHANNEL_COUNT;
242 break;
243 case OMAP_USBTLL_REV2:
244 case OMAP_USBTLL_REV3:
245 tll->nch = OMAP_REV2_TLL_CHANNEL_COUNT;
246 break;
247 default:
248 tll->nch = OMAP_TLL_CHANNEL_COUNT;
249 dev_dbg(dev,
250 "USB TLL Rev : 0x%x not recognized, assuming %d channels\n",
251 ver, tll->nch);
252 break;
253 }
254
255 tll->ch_clk = devm_kzalloc(dev, sizeof(struct clk *) * tll->nch,
256 GFP_KERNEL);
257 if (!tll->ch_clk) {
258 ret = -ENOMEM;
259 dev_err(dev, "Couldn't allocate memory for channel clocks\n");
260 goto err_clk_alloc;
261 }
262
263 for (i = 0; i < tll->nch; i++) {
264 char clkname[] = "usb_tll_hs_usb_chx_clk";
265
266 snprintf(clkname, sizeof(clkname),
267 "usb_tll_hs_usb_ch%d_clk", i);
268 tll->ch_clk[i] = clk_get(dev, clkname);
269
270 if (IS_ERR(tll->ch_clk[i]))
271 dev_dbg(dev, "can't get clock : %s\n", clkname);
272 }
273
274 pm_runtime_put_sync(dev);
275 /* only after this can omap_tll_enable/disable work */
276 spin_lock(&tll_lock);
277 tll_dev = dev;
278 spin_unlock(&tll_lock);
279
280 return 0;
281
282 err_clk_alloc:
283 pm_runtime_put_sync(dev);
284 pm_runtime_disable(dev);
285
286 return ret;
287 }
288
289 /**
290 * usbtll_omap_remove - shutdown processing for UHH & TLL HCDs
291 * @pdev: USB Host Controller being removed
292 *
293 * Reverses the effect of usbtll_omap_probe().
294 */
295 static int usbtll_omap_remove(struct platform_device *pdev)
296 {
297 struct usbtll_omap *tll = platform_get_drvdata(pdev);
298 int i;
299
300 spin_lock(&tll_lock);
301 tll_dev = NULL;
302 spin_unlock(&tll_lock);
303
304 for (i = 0; i < tll->nch; i++)
305 if (!IS_ERR(tll->ch_clk[i]))
306 clk_put(tll->ch_clk[i]);
307
308 pm_runtime_disable(&pdev->dev);
309 return 0;
310 }
311
312 static const struct of_device_id usbtll_omap_dt_ids[] = {
313 { .compatible = "ti,usbhs-tll" },
314 { }
315 };
316
317 MODULE_DEVICE_TABLE(of, usbtll_omap_dt_ids);
318
319 static struct platform_driver usbtll_omap_driver = {
320 .driver = {
321 .name = (char *)usbtll_driver_name,
322 .of_match_table = usbtll_omap_dt_ids,
323 },
324 .probe = usbtll_omap_probe,
325 .remove = usbtll_omap_remove,
326 };
327
328 int omap_tll_init(struct usbhs_omap_platform_data *pdata)
329 {
330 int i;
331 bool needs_tll;
332 unsigned reg;
333 struct usbtll_omap *tll;
334
335 if (!tll_dev)
336 return -ENODEV;
337
338 pm_runtime_get_sync(tll_dev);
339
340 spin_lock(&tll_lock);
341 tll = dev_get_drvdata(tll_dev);
342 needs_tll = false;
343 for (i = 0; i < tll->nch; i++)
344 needs_tll |= omap_usb_mode_needs_tll(pdata->port_mode[i]);
345
346 if (needs_tll) {
347 void __iomem *base = tll->base;
348
349 /* Program Common TLL register */
350 reg = usbtll_read(base, OMAP_TLL_SHARED_CONF);
351 reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON
352 | OMAP_TLL_SHARED_CONF_USB_DIVRATION);
353 reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN;
354 reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN;
355
356 usbtll_write(base, OMAP_TLL_SHARED_CONF, reg);
357
358 /* Enable channels now */
359 for (i = 0; i < tll->nch; i++) {
360 reg = usbtll_read(base, OMAP_TLL_CHANNEL_CONF(i));
361
362 if (is_ohci_port(pdata->port_mode[i])) {
363 reg |= ohci_omap3_fslsmode(pdata->port_mode[i])
364 << OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT;
365 reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS;
366 } else if (pdata->port_mode[i] ==
367 OMAP_EHCI_PORT_MODE_TLL) {
368 /*
369 * Disable AutoIdle, BitStuffing
370 * and use SDR Mode
371 */
372 reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE
373 | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF
374 | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE);
375 } else if (pdata->port_mode[i] ==
376 OMAP_EHCI_PORT_MODE_HSIC) {
377 /*
378 * HSIC Mode requires UTMI port configurations
379 */
380 reg |= OMAP_TLL_CHANNEL_CONF_DRVVBUS
381 | OMAP_TLL_CHANNEL_CONF_CHRGVBUS
382 | OMAP_TLL_CHANNEL_CONF_MODE_TRANSPARENT_UTMI
383 | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF;
384 } else {
385 continue;
386 }
387 reg |= OMAP_TLL_CHANNEL_CONF_CHANEN;
388 usbtll_write(base, OMAP_TLL_CHANNEL_CONF(i), reg);
389
390 usbtll_writeb(base,
391 OMAP_TLL_ULPI_SCRATCH_REGISTER(i),
392 0xbe);
393 }
394 }
395
396 spin_unlock(&tll_lock);
397 pm_runtime_put_sync(tll_dev);
398
399 return 0;
400 }
401 EXPORT_SYMBOL_GPL(omap_tll_init);
402
403 int omap_tll_enable(struct usbhs_omap_platform_data *pdata)
404 {
405 int i;
406 struct usbtll_omap *tll;
407
408 if (!tll_dev)
409 return -ENODEV;
410
411 pm_runtime_get_sync(tll_dev);
412
413 spin_lock(&tll_lock);
414 tll = dev_get_drvdata(tll_dev);
415
416 for (i = 0; i < tll->nch; i++) {
417 if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
418 int r;
419
420 if (IS_ERR(tll->ch_clk[i]))
421 continue;
422
423 r = clk_prepare_enable(tll->ch_clk[i]);
424 if (r) {
425 dev_err(tll_dev,
426 "Error enabling ch %d clock: %d\n", i, r);
427 }
428 }
429 }
430
431 spin_unlock(&tll_lock);
432
433 return 0;
434 }
435 EXPORT_SYMBOL_GPL(omap_tll_enable);
436
437 int omap_tll_disable(struct usbhs_omap_platform_data *pdata)
438 {
439 int i;
440 struct usbtll_omap *tll;
441
442 if (!tll_dev)
443 return -ENODEV;
444
445 spin_lock(&tll_lock);
446 tll = dev_get_drvdata(tll_dev);
447
448 for (i = 0; i < tll->nch; i++) {
449 if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
450 if (!IS_ERR(tll->ch_clk[i]))
451 clk_disable_unprepare(tll->ch_clk[i]);
452 }
453 }
454
455 spin_unlock(&tll_lock);
456 pm_runtime_put_sync(tll_dev);
457
458 return 0;
459 }
460 EXPORT_SYMBOL_GPL(omap_tll_disable);
461
462 MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>");
463 MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
464 MODULE_ALIAS("platform:" USBHS_DRIVER_NAME);
465 MODULE_LICENSE("GPL v2");
466 MODULE_DESCRIPTION("usb tll driver for TI OMAP EHCI and OHCI controllers");
467
468 static int __init omap_usbtll_drvinit(void)
469 {
470 return platform_driver_register(&usbtll_omap_driver);
471 }
472
473 /*
474 * init before usbhs core driver;
475 * The usbtll driver should be initialized before
476 * the usbhs core driver probe function is called.
477 */
478 fs_initcall(omap_usbtll_drvinit);
479
480 static void __exit omap_usbtll_drvexit(void)
481 {
482 platform_driver_unregister(&usbtll_omap_driver);
483 }
484 module_exit(omap_usbtll_drvexit);
Linux with added FPC-III support