drivers/usb/serial/cypress_m8.h

   1 #ifndef CYPRESS_M8_H
   2 #define CYPRESS_M8_H
   3
   4 /*
   5  * definitions and function prototypes used for the cypress USB to Serial
   6  * controller
   7  */
   8
   9 /*
  10  * For sending our feature buffer - controlling serial communication states.
  11  * Linux HID has no support for serial devices so we do this through the driver
  12  */
  13 #define HID_REQ_GET_REPORT      0x01
  14 #define HID_REQ_SET_REPORT      0x09
  15
  16 /* List other cypress USB to Serial devices here, and add them to the id_table */
  17
  18 /* DeLorme Earthmate USB - a GPS device */
  19 #define VENDOR_ID_DELORME               0x1163
  20 #define PRODUCT_ID_EARTHMATEUSB         0x0100
  21 #define PRODUCT_ID_EARTHMATEUSB_LT20    0x0200
  22
  23 /* Cypress HID->COM RS232 Adapter */
  24 #define VENDOR_ID_CYPRESS               0x04b4
  25 #define PRODUCT_ID_CYPHIDCOM            0x5500
  26
  27 /* FRWD Dongle - a GPS sports watch */
  28 #define VENDOR_ID_FRWD                  0x6737
  29 #define PRODUCT_ID_CYPHIDCOM_FRWD       0x0001
  30
  31 /* Powercom UPS, chip CY7C63723 */
  32 #define VENDOR_ID_POWERCOM              0x0d9f
  33 #define PRODUCT_ID_UPS                  0x0002
  34
  35 /* Nokia CA-42 USB to serial cable */
  36 #define VENDOR_ID_DAZZLE                0x07d0
  37 #define PRODUCT_ID_CA42                 0x4101
  38 /* End of device listing */
  39
  40 /* Used for setting / requesting serial line settings */
  41 #define CYPRESS_SET_CONFIG      0x01
  42 #define CYPRESS_GET_CONFIG      0x02
  43
  44 /* Used for throttle control */
  45 #define THROTTLED               0x1
  46 #define ACTUALLY_THROTTLED      0x2
  47
  48 /*
  49  * chiptypes - used in case firmware differs from the generic form ... offering
  50  * different baud speeds/etc.
  51  */
  52 #define CT_EARTHMATE    0x01
  53 #define CT_CYPHIDCOM    0x02
  54 #define CT_CA42V2       0x03
  55 #define CT_GENERIC      0x0F
  56 /* End of chiptype definitions */
  57
  58 /*
  59  * RS-232 serial data communication protocol definitions.
  60  *
  61  * These are sent / read at byte 0 of the input/output hid reports.
  62  * You can find these values defined in the CY4601 USB to Serial design notes.
  63  */
  64
  65 #define CONTROL_DTR     0x20    /* data terminal ready */
  66 #define CONTROL_RTS     0x10    /* request to send */
  67 #define CONTROL_RESET   0x08    /* sent with output report */
  68
  69 #define UART_MSR_MASK   0xf0
  70 #define UART_RI         0x80    /* ring indicator */
  71 #define UART_CD         0x40    /* carrier detect */
  72 #define UART_DSR        0x20    /* data set ready */
  73 #define UART_CTS        0x10    /* clear to send */
  74 #define CYP_ERROR       0x08    /* received from input report */
  75
  76 /* End of RS-232 protocol definitions */
  77
  78 #endif /* CYPRESS_M8_H */