drivers/hwmon/amc6821.c

   1 /*
   2  * amc6821.c - Part of lm_sensors, Linux kernel modules for hardware
   3  *             monitoring
   4  * Copyright (C) 2009 T. Mertelj <tomaz.mertelj@guest.arnes.si>
   5  *
   6  * Based on max6650.c:
   7  * Copyright (C) 2007 Hans J. Koch <hjk@hansjkoch.de>
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License as published by
  11  * the Free Software Foundation; either version 2 of the License, or
  12  * (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  22  */
  23
  24
  25 #include <linux/kernel.h>       /* Needed for KERN_INFO */
  26 #include <linux/module.h>
  27 #include <linux/init.h>
  28 #include <linux/slab.h>
  29 #include <linux/jiffies.h>
  30 #include <linux/i2c.h>
  31 #include <linux/hwmon.h>
  32 #include <linux/hwmon-sysfs.h>
  33 #include <linux/err.h>
  34 #include <linux/mutex.h>
  35
  36
  37 /*
  38  * Addresses to scan.
  39  */
  40
  41 static const unsigned short normal_i2c[] = {0x18, 0x19, 0x1a, 0x2c, 0x2d, 0x2e,
  42         0x4c, 0x4d, 0x4e, I2C_CLIENT_END};
  43
  44
  45
  46 /*
  47  * Insmod parameters
  48  */
  49
  50 static int pwminv;      /*Inverted PWM output. */
  51 module_param(pwminv, int, S_IRUGO);
  52
  53 static int init = 1; /*Power-on initialization.*/
  54 module_param(init, int, S_IRUGO);
  55
  56
  57 enum chips { amc6821 };
  58
  59 #define AMC6821_REG_DEV_ID 0x3D
  60 #define AMC6821_REG_COMP_ID 0x3E
  61 #define AMC6821_REG_CONF1 0x00
  62 #define AMC6821_REG_CONF2 0x01
  63 #define AMC6821_REG_CONF3 0x3F
  64 #define AMC6821_REG_CONF4 0x04
  65 #define AMC6821_REG_STAT1 0x02
  66 #define AMC6821_REG_STAT2 0x03
  67 #define AMC6821_REG_TDATA_LOW 0x08
  68 #define AMC6821_REG_TDATA_HI 0x09
  69 #define AMC6821_REG_LTEMP_HI 0x0A
  70 #define AMC6821_REG_RTEMP_HI 0x0B
  71 #define AMC6821_REG_LTEMP_LIMIT_MIN 0x15
  72 #define AMC6821_REG_LTEMP_LIMIT_MAX 0x14
  73 #define AMC6821_REG_RTEMP_LIMIT_MIN 0x19
  74 #define AMC6821_REG_RTEMP_LIMIT_MAX 0x18
  75 #define AMC6821_REG_LTEMP_CRIT 0x1B
  76 #define AMC6821_REG_RTEMP_CRIT 0x1D
  77 #define AMC6821_REG_PSV_TEMP 0x1C
  78 #define AMC6821_REG_DCY 0x22
  79 #define AMC6821_REG_LTEMP_FAN_CTRL 0x24
  80 #define AMC6821_REG_RTEMP_FAN_CTRL 0x25
  81 #define AMC6821_REG_DCY_LOW_TEMP 0x21
  82
  83 #define AMC6821_REG_TACH_LLIMITL 0x10
  84 #define AMC6821_REG_TACH_LLIMITH 0x11
  85 #define AMC6821_REG_TACH_HLIMITL 0x12
  86 #define AMC6821_REG_TACH_HLIMITH 0x13
  87
  88 #define AMC6821_CONF1_START 0x01
  89 #define AMC6821_CONF1_FAN_INT_EN 0x02
  90 #define AMC6821_CONF1_FANIE 0x04
  91 #define AMC6821_CONF1_PWMINV 0x08
  92 #define AMC6821_CONF1_FAN_FAULT_EN 0x10
  93 #define AMC6821_CONF1_FDRC0 0x20
  94 #define AMC6821_CONF1_FDRC1 0x40
  95 #define AMC6821_CONF1_THERMOVIE 0x80
  96
  97 #define AMC6821_CONF2_PWM_EN 0x01
  98 #define AMC6821_CONF2_TACH_MODE 0x02
  99 #define AMC6821_CONF2_TACH_EN 0x04
 100 #define AMC6821_CONF2_RTFIE 0x08
 101 #define AMC6821_CONF2_LTOIE 0x10
 102 #define AMC6821_CONF2_RTOIE 0x20
 103 #define AMC6821_CONF2_PSVIE 0x40
 104 #define AMC6821_CONF2_RST 0x80
 105
 106 #define AMC6821_CONF3_THERM_FAN_EN 0x80
 107 #define AMC6821_CONF3_REV_MASK 0x0F
 108
 109 #define AMC6821_CONF4_OVREN 0x10
 110 #define AMC6821_CONF4_TACH_FAST 0x20
 111 #define AMC6821_CONF4_PSPR 0x40
 112 #define AMC6821_CONF4_MODE 0x80
 113
 114 #define AMC6821_STAT1_RPM_ALARM 0x01
 115 #define AMC6821_STAT1_FANS 0x02
 116 #define AMC6821_STAT1_RTH 0x04
 117 #define AMC6821_STAT1_RTL 0x08
 118 #define AMC6821_STAT1_R_THERM 0x10
 119 #define AMC6821_STAT1_RTF 0x20
 120 #define AMC6821_STAT1_LTH 0x40
 121 #define AMC6821_STAT1_LTL 0x80
 122
 123 #define AMC6821_STAT2_RTC 0x08
 124 #define AMC6821_STAT2_LTC 0x10
 125 #define AMC6821_STAT2_LPSV 0x20
 126 #define AMC6821_STAT2_L_THERM 0x40
 127 #define AMC6821_STAT2_THERM_IN 0x80
 128
 129 enum {IDX_TEMP1_INPUT = 0, IDX_TEMP1_MIN, IDX_TEMP1_MAX,
 130         IDX_TEMP1_CRIT, IDX_TEMP2_INPUT, IDX_TEMP2_MIN,
 131         IDX_TEMP2_MAX, IDX_TEMP2_CRIT,
 132         TEMP_IDX_LEN, };
 133
 134 static const u8 temp_reg[] = {AMC6821_REG_LTEMP_HI,
 135                         AMC6821_REG_LTEMP_LIMIT_MIN,
 136                         AMC6821_REG_LTEMP_LIMIT_MAX,
 137                         AMC6821_REG_LTEMP_CRIT,
 138                         AMC6821_REG_RTEMP_HI,
 139                         AMC6821_REG_RTEMP_LIMIT_MIN,
 140                         AMC6821_REG_RTEMP_LIMIT_MAX,
 141                         AMC6821_REG_RTEMP_CRIT, };
 142
 143 enum {IDX_FAN1_INPUT = 0, IDX_FAN1_MIN, IDX_FAN1_MAX,
 144         FAN1_IDX_LEN, };
 145
 146 static const u8 fan_reg_low[] = {AMC6821_REG_TDATA_LOW,
 147                         AMC6821_REG_TACH_LLIMITL,
 148                         AMC6821_REG_TACH_HLIMITL, };
 149
 150
 151 static const u8 fan_reg_hi[] = {AMC6821_REG_TDATA_HI,
 152                         AMC6821_REG_TACH_LLIMITH,
 153                         AMC6821_REG_TACH_HLIMITH, };
 154
 155 static int amc6821_probe(
 156                 struct i2c_client *client,
 157                 const struct i2c_device_id *id);
 158 static int amc6821_detect(
 159                 struct i2c_client *client,
 160                 struct i2c_board_info *info);
 161 static int amc6821_init_client(struct i2c_client *client);
 162 static int amc6821_remove(struct i2c_client *client);
 163 static struct amc6821_data *amc6821_update_device(struct device *dev);
 164
 165 /*
 166  * Driver data (common to all clients)
 167  */
 168
 169 static const struct i2c_device_id amc6821_id[] = {
 170         { "amc6821", amc6821 },
 171         { }
 172 };
 173
 174 MODULE_DEVICE_TABLE(i2c, amc6821_id);
 175
 176 static struct i2c_driver amc6821_driver = {
 177         .class = I2C_CLASS_HWMON,
 178         .driver = {
 179                 .name   = "amc6821",
 180         },
 181         .probe = amc6821_probe,
 182         .remove = amc6821_remove,
 183         .id_table = amc6821_id,
 184         .detect = amc6821_detect,
 185         .address_list = normal_i2c,
 186 };
 187
 188
 189 /*
 190  * Client data (each client gets its own)
 191  */
 192
 193 struct amc6821_data {
 194         struct device *hwmon_dev;
 195         struct mutex update_lock;
 196         char valid; /* zero until following fields are valid */
 197         unsigned long last_updated; /* in jiffies */
 198
 199         /* register values */
 200         int temp[TEMP_IDX_LEN];
 201
 202         u16 fan[FAN1_IDX_LEN];
 203         u8 fan1_div;
 204
 205         u8 pwm1;
 206         u8 temp1_auto_point_temp[3];
 207         u8 temp2_auto_point_temp[3];
 208         u8 pwm1_auto_point_pwm[3];
 209         u8 pwm1_enable;
 210         u8 pwm1_auto_channels_temp;
 211
 212         u8 stat1;
 213         u8 stat2;
 214 };
 215
 216
 217 static ssize_t get_temp(
 218                 struct device *dev,
 219                 struct device_attribute *devattr,
 220                 char *buf)
 221 {
 222         struct amc6821_data *data = amc6821_update_device(dev);
 223         int ix = to_sensor_dev_attr(devattr)->index;
 224
 225         return sprintf(buf, "%d\n", data->temp[ix] * 1000);
 226 }
 227
 228
 229
 230 static ssize_t set_temp(
 231                 struct device *dev,
 232                 struct device_attribute *attr,
 233                 const char *buf,
 234                 size_t count)
 235 {
 236         struct i2c_client *client = to_i2c_client(dev);
 237         struct amc6821_data *data = i2c_get_clientdata(client);
 238         int ix = to_sensor_dev_attr(attr)->index;
 239         long val;
 240
 241         int ret = kstrtol(buf, 10, &val);
 242         if (ret)
 243                 return ret;
 244         val = SENSORS_LIMIT(val / 1000, -128, 127);
 245
 246         mutex_lock(&data->update_lock);
 247         data->temp[ix] = val;
 248         if (i2c_smbus_write_byte_data(client, temp_reg[ix], data->temp[ix])) {
 249                 dev_err(&client->dev, "Register write error, aborting.\n");
 250                 count = -EIO;
 251         }
 252         mutex_unlock(&data->update_lock);
 253         return count;
 254 }
 255
 256
 257
 258
 259 static ssize_t get_temp_alarm(
 260         struct device *dev,
 261         struct device_attribute *devattr,
 262         char *buf)
 263 {
 264         struct amc6821_data *data = amc6821_update_device(dev);
 265         int ix = to_sensor_dev_attr(devattr)->index;
 266         u8 flag;
 267
 268         switch (ix) {
 269         case IDX_TEMP1_MIN:
 270                 flag = data->stat1 & AMC6821_STAT1_LTL;
 271                 break;
 272         case IDX_TEMP1_MAX:
 273                 flag = data->stat1 & AMC6821_STAT1_LTH;
 274                 break;
 275         case IDX_TEMP1_CRIT:
 276                 flag = data->stat2 & AMC6821_STAT2_LTC;
 277                 break;
 278         case IDX_TEMP2_MIN:
 279                 flag = data->stat1 & AMC6821_STAT1_RTL;
 280                 break;
 281         case IDX_TEMP2_MAX:
 282                 flag = data->stat1 & AMC6821_STAT1_RTH;
 283                 break;
 284         case IDX_TEMP2_CRIT:
 285                 flag = data->stat2 & AMC6821_STAT2_RTC;
 286                 break;
 287         default:
 288                 dev_dbg(dev, "Unknown attr->index (%d).\n", ix);
 289                 return -EINVAL;
 290         }
 291         if (flag)
 292                 return sprintf(buf, "1");
 293         else
 294                 return sprintf(buf, "0");
 295 }
 296
 297
 298
 299
 300 static ssize_t get_temp2_fault(
 301                 struct device *dev,
 302                 struct device_attribute *devattr,
 303                 char *buf)
 304 {
 305         struct amc6821_data *data = amc6821_update_device(dev);
 306         if (data->stat1 & AMC6821_STAT1_RTF)
 307                 return sprintf(buf, "1");
 308         else
 309                 return sprintf(buf, "0");
 310 }
 311
 312 static ssize_t get_pwm1(
 313                 struct device *dev,
 314                 struct device_attribute *devattr,
 315                 char *buf)
 316 {
 317         struct amc6821_data *data = amc6821_update_device(dev);
 318         return sprintf(buf, "%d\n", data->pwm1);
 319 }
 320
 321 static ssize_t set_pwm1(
 322                 struct device *dev,
 323                 struct device_attribute *devattr,
 324                 const char *buf,
 325                 size_t count)
 326 {
 327         struct i2c_client *client = to_i2c_client(dev);
 328         struct amc6821_data *data = i2c_get_clientdata(client);
 329         long val;
 330         int ret = kstrtol(buf, 10, &val);
 331         if (ret)
 332                 return ret;
 333
 334         mutex_lock(&data->update_lock);
 335         data->pwm1 = SENSORS_LIMIT(val , 0, 255);
 336         i2c_smbus_write_byte_data(client, AMC6821_REG_DCY, data->pwm1);
 337         mutex_unlock(&data->update_lock);
 338         return count;
 339 }
 340
 341 static ssize_t get_pwm1_enable(
 342                 struct device *dev,
 343                 struct device_attribute *devattr,
 344                 char *buf)
 345 {
 346         struct amc6821_data *data = amc6821_update_device(dev);
 347         return sprintf(buf, "%d\n", data->pwm1_enable);
 348 }
 349
 350 static ssize_t set_pwm1_enable(
 351                 struct device *dev,
 352                 struct device_attribute *attr,
 353                 const char *buf,
 354                 size_t count)
 355 {
 356         struct i2c_client *client = to_i2c_client(dev);
 357         struct amc6821_data *data = i2c_get_clientdata(client);
 358         long val;
 359         int config = kstrtol(buf, 10, &val);
 360         if (config)
 361                 return config;
 362
 363         config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1);
 364         if (config < 0) {
 365                         dev_err(&client->dev,
 366                         "Error reading configuration register, aborting.\n");
 367                         return -EIO;
 368         }
 369
 370         switch (val) {
 371         case 1:
 372                 config &= ~AMC6821_CONF1_FDRC0;
 373                 config &= ~AMC6821_CONF1_FDRC1;
 374                 break;
 375         case 2:
 376                 config &= ~AMC6821_CONF1_FDRC0;
 377                 config |= AMC6821_CONF1_FDRC1;
 378                 break;
 379         case 3:
 380                 config |= AMC6821_CONF1_FDRC0;
 381                 config |= AMC6821_CONF1_FDRC1;
 382                 break;
 383         default:
 384                 return -EINVAL;
 385         }
 386         mutex_lock(&data->update_lock);
 387         if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF1, config)) {
 388                         dev_err(&client->dev,
 389                         "Configuration register write error, aborting.\n");
 390                         count = -EIO;
 391         }
 392         mutex_unlock(&data->update_lock);
 393         return count;
 394 }
 395
 396
 397 static ssize_t get_pwm1_auto_channels_temp(
 398                 struct device *dev,
 399                 struct device_attribute *devattr,
 400                 char *buf)
 401 {
 402         struct amc6821_data *data = amc6821_update_device(dev);
 403         return sprintf(buf, "%d\n", data->pwm1_auto_channels_temp);
 404 }
 405
 406
 407 static ssize_t get_temp_auto_point_temp(
 408                 struct device *dev,
 409                 struct device_attribute *devattr,
 410                 char *buf)
 411 {
 412         int ix = to_sensor_dev_attr_2(devattr)->index;
 413         int nr = to_sensor_dev_attr_2(devattr)->nr;
 414         struct amc6821_data *data = amc6821_update_device(dev);
 415         switch (nr) {
 416         case 1:
 417                 return sprintf(buf, "%d\n",
 418                         data->temp1_auto_point_temp[ix] * 1000);
 419                 break;
 420         case 2:
 421                 return sprintf(buf, "%d\n",
 422                         data->temp2_auto_point_temp[ix] * 1000);
 423                 break;
 424         default:
 425                 dev_dbg(dev, "Unknown attr->nr (%d).\n", nr);
 426                 return -EINVAL;
 427         }
 428 }
 429
 430
 431 static ssize_t get_pwm1_auto_point_pwm(
 432                 struct device *dev,
 433                 struct device_attribute *devattr,
 434                 char *buf)
 435 {
 436         int ix = to_sensor_dev_attr(devattr)->index;
 437         struct amc6821_data *data = amc6821_update_device(dev);
 438         return sprintf(buf, "%d\n", data->pwm1_auto_point_pwm[ix]);
 439 }
 440
 441
 442 static inline ssize_t set_slope_register(struct i2c_client *client,
 443                 u8 reg,
 444                 u8 dpwm,
 445                 u8 *ptemp)
 446 {
 447         int dt;
 448         u8 tmp;
 449
 450         dt = ptemp[2]-ptemp[1];
 451         for (tmp = 4; tmp > 0; tmp--) {
 452                 if (dt * (0x20 >> tmp) >= dpwm)
 453                         break;
 454         }
 455         tmp |= (ptemp[1] & 0x7C) << 1;
 456         if (i2c_smbus_write_byte_data(client,
 457                         reg, tmp)) {
 458                 dev_err(&client->dev, "Register write error, aborting.\n");
 459                 return -EIO;
 460         }
 461         return 0;
 462 }
 463
 464
 465
 466 static ssize_t set_temp_auto_point_temp(
 467                 struct device *dev,
 468                 struct device_attribute *attr,
 469                 const char *buf,
 470                 size_t count)
 471 {
 472         struct i2c_client *client = to_i2c_client(dev);
 473         struct amc6821_data *data = amc6821_update_device(dev);
 474         int ix = to_sensor_dev_attr_2(attr)->index;
 475         int nr = to_sensor_dev_attr_2(attr)->nr;
 476         u8 *ptemp;
 477         u8 reg;
 478         int dpwm;
 479         long val;
 480         int ret = kstrtol(buf, 10, &val);
 481         if (ret)
 482                 return ret;
 483
 484         switch (nr) {
 485         case 1:
 486                 ptemp = data->temp1_auto_point_temp;
 487                 reg = AMC6821_REG_LTEMP_FAN_CTRL;
 488                 break;
 489         case 2:
 490                 ptemp = data->temp2_auto_point_temp;
 491                 reg = AMC6821_REG_RTEMP_FAN_CTRL;
 492                 break;
 493         default:
 494                 dev_dbg(dev, "Unknown attr->nr (%d).\n", nr);
 495                 return -EINVAL;
 496         }
 497
 498         data->valid = 0;
 499         mutex_lock(&data->update_lock);
 500         switch (ix) {
 501         case 0:
 502                 ptemp[0] = SENSORS_LIMIT(val / 1000, 0,
 503                                 data->temp1_auto_point_temp[1]);
 504                 ptemp[0] = SENSORS_LIMIT(ptemp[0], 0,
 505                                 data->temp2_auto_point_temp[1]);
 506                 ptemp[0] = SENSORS_LIMIT(ptemp[0], 0, 63);
 507                 if (i2c_smbus_write_byte_data(
 508                                         client,
 509                                         AMC6821_REG_PSV_TEMP,
 510                                         ptemp[0])) {
 511                                 dev_err(&client->dev,
 512                                         "Register write error, aborting.\n");
 513                                 count = -EIO;
 514                 }
 515                 goto EXIT;
 516                 break;
 517         case 1:
 518                 ptemp[1] = SENSORS_LIMIT(
 519                                         val / 1000,
 520                                         (ptemp[0] & 0x7C) + 4,
 521                                         124);
 522                 ptemp[1] &= 0x7C;
 523                 ptemp[2] = SENSORS_LIMIT(
 524                                         ptemp[2], ptemp[1] + 1,
 525                                         255);
 526                 break;
 527         case 2:
 528                 ptemp[2] = SENSORS_LIMIT(
 529                                         val / 1000,
 530                                         ptemp[1]+1,
 531                                         255);
 532                 break;
 533         default:
 534                 dev_dbg(dev, "Unknown attr->index (%d).\n", ix);
 535                 count = -EINVAL;
 536                 goto EXIT;
 537         }
 538         dpwm = data->pwm1_auto_point_pwm[2] - data->pwm1_auto_point_pwm[1];
 539         if (set_slope_register(client, reg, dpwm, ptemp))
 540                 count = -EIO;
 541
 542 EXIT:
 543         mutex_unlock(&data->update_lock);
 544         return count;
 545 }
 546
 547
 548
 549 static ssize_t set_pwm1_auto_point_pwm(
 550                 struct device *dev,
 551                 struct device_attribute *attr,
 552                 const char *buf,
 553                 size_t count)
 554 {
 555         struct i2c_client *client = to_i2c_client(dev);
 556         struct amc6821_data *data = i2c_get_clientdata(client);
 557         int dpwm;
 558         long val;
 559         int ret = kstrtol(buf, 10, &val);
 560         if (ret)
 561                 return ret;
 562
 563         mutex_lock(&data->update_lock);
 564         data->pwm1_auto_point_pwm[1] = SENSORS_LIMIT(val, 0, 254);
 565         if (i2c_smbus_write_byte_data(client, AMC6821_REG_DCY_LOW_TEMP,
 566                         data->pwm1_auto_point_pwm[1])) {
 567                 dev_err(&client->dev, "Register write error, aborting.\n");
 568                 count = -EIO;
 569                 goto EXIT;
 570         }
 571         dpwm = data->pwm1_auto_point_pwm[2] - data->pwm1_auto_point_pwm[1];
 572         if (set_slope_register(client, AMC6821_REG_LTEMP_FAN_CTRL, dpwm,
 573                         data->temp1_auto_point_temp)) {
 574                 count = -EIO;
 575                 goto EXIT;
 576         }
 577         if (set_slope_register(client, AMC6821_REG_RTEMP_FAN_CTRL, dpwm,
 578                         data->temp2_auto_point_temp)) {
 579                 count = -EIO;
 580                 goto EXIT;
 581         }
 582
 583 EXIT:
 584         data->valid = 0;
 585         mutex_unlock(&data->update_lock);
 586         return count;
 587 }
 588
 589 static ssize_t get_fan(
 590                 struct device *dev,
 591                 struct device_attribute *devattr,
 592                 char *buf)
 593 {
 594         struct amc6821_data *data = amc6821_update_device(dev);
 595         int ix = to_sensor_dev_attr(devattr)->index;
 596         if (0 == data->fan[ix])
 597                 return sprintf(buf, "0");
 598         return sprintf(buf, "%d\n", (int)(6000000 / data->fan[ix]));
 599 }
 600
 601
 602
 603 static ssize_t get_fan1_fault(
 604                 struct device *dev,
 605                 struct device_attribute *devattr,
 606                 char *buf)
 607 {
 608         struct amc6821_data *data = amc6821_update_device(dev);
 609         if (data->stat1 & AMC6821_STAT1_FANS)
 610                 return sprintf(buf, "1");
 611         else
 612                 return sprintf(buf, "0");
 613 }
 614
 615
 616
 617 static ssize_t set_fan(
 618                 struct device *dev,
 619                 struct device_attribute *attr,
 620                 const char *buf, size_t count)
 621 {
 622         struct i2c_client *client = to_i2c_client(dev);
 623         struct amc6821_data *data = i2c_get_clientdata(client);
 624         long val;
 625         int ix = to_sensor_dev_attr(attr)->index;
 626         int ret = kstrtol(buf, 10, &val);
 627         if (ret)
 628                 return ret;
 629         val = 1 > val ? 0xFFFF : 6000000/val;
 630
 631         mutex_lock(&data->update_lock);
 632         data->fan[ix] = (u16) SENSORS_LIMIT(val, 1, 0xFFFF);
 633         if (i2c_smbus_write_byte_data(client, fan_reg_low[ix],
 634                         data->fan[ix] & 0xFF)) {
 635                 dev_err(&client->dev, "Register write error, aborting.\n");
 636                 count = -EIO;
 637                 goto EXIT;
 638         }
 639         if (i2c_smbus_write_byte_data(client,
 640                         fan_reg_hi[ix], data->fan[ix] >> 8)) {
 641                 dev_err(&client->dev, "Register write error, aborting.\n");
 642                 count = -EIO;
 643         }
 644 EXIT:
 645         mutex_unlock(&data->update_lock);
 646         return count;
 647 }
 648
 649
 650
 651 static ssize_t get_fan1_div(
 652                 struct device *dev,
 653                 struct device_attribute *devattr,
 654                 char *buf)
 655 {
 656         struct amc6821_data *data = amc6821_update_device(dev);
 657         return sprintf(buf, "%d\n", data->fan1_div);
 658 }
 659
 660 static ssize_t set_fan1_div(
 661                 struct device *dev,
 662                 struct device_attribute *attr,
 663                 const char *buf, size_t count)
 664 {
 665         struct i2c_client *client = to_i2c_client(dev);
 666         struct amc6821_data *data = i2c_get_clientdata(client);
 667         long val;
 668         int config = kstrtol(buf, 10, &val);
 669         if (config)
 670                 return config;
 671
 672         config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF4);
 673         if (config < 0) {
 674                 dev_err(&client->dev,
 675                         "Error reading configuration register, aborting.\n");
 676                 return -EIO;
 677         }
 678         mutex_lock(&data->update_lock);
 679         switch (val) {
 680         case 2:
 681                 config &= ~AMC6821_CONF4_PSPR;
 682                 data->fan1_div = 2;
 683                 break;
 684         case 4:
 685                 config |= AMC6821_CONF4_PSPR;
 686                 data->fan1_div = 4;
 687                 break;
 688         default:
 689                 count = -EINVAL;
 690                 goto EXIT;
 691         }
 692         if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF4, config)) {
 693                 dev_err(&client->dev,
 694                         "Configuration register write error, aborting.\n");
 695                 count = -EIO;
 696         }
 697 EXIT:
 698         mutex_unlock(&data->update_lock);
 699         return count;
 700 }
 701
 702
 703
 704 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
 705         get_temp, NULL, IDX_TEMP1_INPUT);
 706 static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO | S_IWUSR, get_temp,
 707         set_temp, IDX_TEMP1_MIN);
 708 static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, get_temp,
 709         set_temp, IDX_TEMP1_MAX);
 710 static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO | S_IWUSR, get_temp,
 711         set_temp, IDX_TEMP1_CRIT);
 712 static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO,
 713         get_temp_alarm, NULL, IDX_TEMP1_MIN);
 714 static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO,
 715         get_temp_alarm, NULL, IDX_TEMP1_MAX);
 716 static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO,
 717         get_temp_alarm, NULL, IDX_TEMP1_CRIT);
 718 static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO | S_IWUSR,
 719         get_temp, NULL, IDX_TEMP2_INPUT);
 720 static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO | S_IWUSR, get_temp,
 721         set_temp, IDX_TEMP2_MIN);
 722 static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO | S_IWUSR, get_temp,
 723         set_temp, IDX_TEMP2_MAX);
 724 static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO | S_IWUSR, get_temp,
 725         set_temp, IDX_TEMP2_CRIT);
 726 static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO,
 727         get_temp2_fault, NULL, 0);
 728 static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO,
 729         get_temp_alarm, NULL, IDX_TEMP2_MIN);
 730 static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO,
 731         get_temp_alarm, NULL, IDX_TEMP2_MAX);
 732 static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO,
 733         get_temp_alarm, NULL, IDX_TEMP2_CRIT);
 734 static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, get_fan, NULL, IDX_FAN1_INPUT);
 735 static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO | S_IWUSR,
 736         get_fan, set_fan, IDX_FAN1_MIN);
 737 static SENSOR_DEVICE_ATTR(fan1_max, S_IRUGO | S_IWUSR,
 738         get_fan, set_fan, IDX_FAN1_MAX);
 739 static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, get_fan1_fault, NULL, 0);
 740 static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR,
 741         get_fan1_div, set_fan1_div, 0);
 742
 743 static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, get_pwm1, set_pwm1, 0);
 744 static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO,
 745         get_pwm1_enable, set_pwm1_enable, 0);
 746 static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IRUGO,
 747         get_pwm1_auto_point_pwm, NULL, 0);
 748 static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO,
 749         get_pwm1_auto_point_pwm, set_pwm1_auto_point_pwm, 1);
 750 static SENSOR_DEVICE_ATTR(pwm1_auto_point3_pwm, S_IRUGO,
 751         get_pwm1_auto_point_pwm, NULL, 2);
 752 static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IRUGO,
 753         get_pwm1_auto_channels_temp, NULL, 0);
 754 static SENSOR_DEVICE_ATTR_2(temp1_auto_point1_temp, S_IRUGO,
 755         get_temp_auto_point_temp, NULL, 1, 0);
 756 static SENSOR_DEVICE_ATTR_2(temp1_auto_point2_temp, S_IWUSR | S_IRUGO,
 757         get_temp_auto_point_temp, set_temp_auto_point_temp, 1, 1);
 758 static SENSOR_DEVICE_ATTR_2(temp1_auto_point3_temp, S_IWUSR | S_IRUGO,
 759         get_temp_auto_point_temp, set_temp_auto_point_temp, 1, 2);
 760
 761 static SENSOR_DEVICE_ATTR_2(temp2_auto_point1_temp, S_IWUSR | S_IRUGO,
 762         get_temp_auto_point_temp, set_temp_auto_point_temp, 2, 0);
 763 static SENSOR_DEVICE_ATTR_2(temp2_auto_point2_temp, S_IWUSR | S_IRUGO,
 764         get_temp_auto_point_temp, set_temp_auto_point_temp, 2, 1);
 765 static SENSOR_DEVICE_ATTR_2(temp2_auto_point3_temp, S_IWUSR | S_IRUGO,
 766         get_temp_auto_point_temp, set_temp_auto_point_temp, 2, 2);
 767
 768
 769
 770 static struct attribute *amc6821_attrs[] = {
 771         &sensor_dev_attr_temp1_input.dev_attr.attr,
 772         &sensor_dev_attr_temp1_min.dev_attr.attr,
 773         &sensor_dev_attr_temp1_max.dev_attr.attr,
 774         &sensor_dev_attr_temp1_crit.dev_attr.attr,
 775         &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
 776         &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
 777         &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
 778         &sensor_dev_attr_temp2_input.dev_attr.attr,
 779         &sensor_dev_attr_temp2_min.dev_attr.attr,
 780         &sensor_dev_attr_temp2_max.dev_attr.attr,
 781         &sensor_dev_attr_temp2_crit.dev_attr.attr,
 782         &sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
 783         &sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
 784         &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
 785         &sensor_dev_attr_temp2_fault.dev_attr.attr,
 786         &sensor_dev_attr_fan1_input.dev_attr.attr,
 787         &sensor_dev_attr_fan1_min.dev_attr.attr,
 788         &sensor_dev_attr_fan1_max.dev_attr.attr,
 789         &sensor_dev_attr_fan1_fault.dev_attr.attr,
 790         &sensor_dev_attr_fan1_div.dev_attr.attr,
 791         &sensor_dev_attr_pwm1.dev_attr.attr,
 792         &sensor_dev_attr_pwm1_enable.dev_attr.attr,
 793         &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
 794         &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
 795         &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
 796         &sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr,
 797         &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr,
 798         &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr,
 799         &sensor_dev_attr_temp1_auto_point3_temp.dev_attr.attr,
 800         &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr,
 801         &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr,
 802         &sensor_dev_attr_temp2_auto_point3_temp.dev_attr.attr,
 803         NULL
 804 };
 805
 806 static struct attribute_group amc6821_attr_grp = {
 807         .attrs = amc6821_attrs,
 808 };
 809
 810
 811
 812 /* Return 0 if detection is successful, -ENODEV otherwise */
 813 static int amc6821_detect(
 814                 struct i2c_client *client,
 815                 struct i2c_board_info *info)
 816 {
 817         struct i2c_adapter *adapter = client->adapter;
 818         int address = client->addr;
 819         int dev_id, comp_id;
 820
 821         dev_dbg(&adapter->dev, "amc6821_detect called.\n");
 822
 823         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 824                 dev_dbg(&adapter->dev,
 825                         "amc6821: I2C bus doesn't support byte mode, "
 826                         "skipping.\n");
 827                 return -ENODEV;
 828         }
 829
 830         dev_id = i2c_smbus_read_byte_data(client, AMC6821_REG_DEV_ID);
 831         comp_id = i2c_smbus_read_byte_data(client, AMC6821_REG_COMP_ID);
 832         if (dev_id != 0x21 || comp_id != 0x49) {
 833                 dev_dbg(&adapter->dev,
 834                         "amc6821: detection failed at 0x%02x.\n",
 835                         address);
 836                 return -ENODEV;
 837         }
 838
 839         /*
 840          * Bit 7 of the address register is ignored, so we can check the
 841          * ID registers again
 842          */
 843         dev_id = i2c_smbus_read_byte_data(client, 0x80 | AMC6821_REG_DEV_ID);
 844         comp_id = i2c_smbus_read_byte_data(client, 0x80 | AMC6821_REG_COMP_ID);
 845         if (dev_id != 0x21 || comp_id != 0x49) {
 846                 dev_dbg(&adapter->dev,
 847                         "amc6821: detection failed at 0x%02x.\n",
 848                         address);
 849                 return -ENODEV;
 850         }
 851
 852         dev_info(&adapter->dev, "amc6821: chip found at 0x%02x.\n", address);
 853         strlcpy(info->type, "amc6821", I2C_NAME_SIZE);
 854
 855         return 0;
 856 }
 857
 858 static int amc6821_probe(
 859         struct i2c_client *client,
 860         const struct i2c_device_id *id)
 861 {
 862         struct amc6821_data *data;
 863         int err;
 864
 865         data = devm_kzalloc(&client->dev, sizeof(struct amc6821_data),
 866                             GFP_KERNEL);
 867         if (!data)
 868                 return -ENOMEM;
 869
 870         i2c_set_clientdata(client, data);
 871         mutex_init(&data->update_lock);
 872
 873         /*
 874          * Initialize the amc6821 chip
 875          */
 876         err = amc6821_init_client(client);
 877         if (err)
 878                 return err;
 879
 880         err = sysfs_create_group(&client->dev.kobj, &amc6821_attr_grp);
 881         if (err)
 882                 return err;
 883
 884         data->hwmon_dev = hwmon_device_register(&client->dev);
 885         if (!IS_ERR(data->hwmon_dev))
 886                 return 0;
 887
 888         err = PTR_ERR(data->hwmon_dev);
 889         dev_err(&client->dev, "error registering hwmon device.\n");
 890         sysfs_remove_group(&client->dev.kobj, &amc6821_attr_grp);
 891         return err;
 892 }
 893
 894 static int amc6821_remove(struct i2c_client *client)
 895 {
 896         struct amc6821_data *data = i2c_get_clientdata(client);
 897
 898         hwmon_device_unregister(data->hwmon_dev);
 899         sysfs_remove_group(&client->dev.kobj, &amc6821_attr_grp);
 900
 901         return 0;
 902 }
 903
 904
 905 static int amc6821_init_client(struct i2c_client *client)
 906 {
 907         int config;
 908         int err = -EIO;
 909
 910         if (init) {
 911                 config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF4);
 912
 913                 if (config < 0) {
 914                                 dev_err(&client->dev,
 915                         "Error reading configuration register, aborting.\n");
 916                                 return err;
 917                 }
 918
 919                 config |= AMC6821_CONF4_MODE;
 920
 921                 if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF4,
 922                                 config)) {
 923                         dev_err(&client->dev,
 924                         "Configuration register write error, aborting.\n");
 925                         return err;
 926                 }
 927
 928                 config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF3);
 929
 930                 if (config < 0) {
 931                         dev_err(&client->dev,
 932                         "Error reading configuration register, aborting.\n");
 933                         return err;
 934                 }
 935
 936                 dev_info(&client->dev, "Revision %d\n", config & 0x0f);
 937
 938                 config &= ~AMC6821_CONF3_THERM_FAN_EN;
 939
 940                 if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF3,
 941                                 config)) {
 942                         dev_err(&client->dev,
 943                         "Configuration register write error, aborting.\n");
 944                         return err;
 945                 }
 946
 947                 config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF2);
 948
 949                 if (config < 0) {
 950                         dev_err(&client->dev,
 951                         "Error reading configuration register, aborting.\n");
 952                         return err;
 953                 }
 954
 955                 config &= ~AMC6821_CONF2_RTFIE;
 956                 config &= ~AMC6821_CONF2_LTOIE;
 957                 config &= ~AMC6821_CONF2_RTOIE;
 958                 if (i2c_smbus_write_byte_data(client,
 959                                 AMC6821_REG_CONF2, config)) {
 960                         dev_err(&client->dev,
 961                         "Configuration register write error, aborting.\n");
 962                         return err;
 963                 }
 964
 965                 config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1);
 966
 967                 if (config < 0) {
 968                         dev_err(&client->dev,
 969                         "Error reading configuration register, aborting.\n");
 970                         return err;
 971                 }
 972
 973                 config &= ~AMC6821_CONF1_THERMOVIE;
 974                 config &= ~AMC6821_CONF1_FANIE;
 975                 config |= AMC6821_CONF1_START;
 976                 if (pwminv)
 977                         config |= AMC6821_CONF1_PWMINV;
 978                 else
 979                         config &= ~AMC6821_CONF1_PWMINV;
 980
 981                 if (i2c_smbus_write_byte_data(
 982                                 client, AMC6821_REG_CONF1, config)) {
 983                         dev_err(&client->dev,
 984                         "Configuration register write error, aborting.\n");
 985                         return err;
 986                 }
 987         }
 988         return 0;
 989 }
 990
 991
 992 static struct amc6821_data *amc6821_update_device(struct device *dev)
 993 {
 994         struct i2c_client *client = to_i2c_client(dev);
 995         struct amc6821_data *data = i2c_get_clientdata(client);
 996         int timeout = HZ;
 997         u8 reg;
 998         int i;
 999
1000         mutex_lock(&data->update_lock);
1001
1002         if (time_after(jiffies, data->last_updated + timeout) ||
1003                         !data->valid) {
1004
1005                 for (i = 0; i < TEMP_IDX_LEN; i++)
1006                         data->temp[i] = i2c_smbus_read_byte_data(client,
1007                                 temp_reg[i]);
1008
1009                 data->stat1 = i2c_smbus_read_byte_data(client,
1010                         AMC6821_REG_STAT1);
1011                 data->stat2 = i2c_smbus_read_byte_data(client,
1012                         AMC6821_REG_STAT2);
1013
1014                 data->pwm1 = i2c_smbus_read_byte_data(client,
1015                         AMC6821_REG_DCY);
1016                 for (i = 0; i < FAN1_IDX_LEN; i++) {
1017                         data->fan[i] = i2c_smbus_read_byte_data(
1018                                         client,
1019                                         fan_reg_low[i]);
1020                         data->fan[i] += i2c_smbus_read_byte_data(
1021                                         client,
1022                                         fan_reg_hi[i]) << 8;
1023                 }
1024                 data->fan1_div = i2c_smbus_read_byte_data(client,
1025                         AMC6821_REG_CONF4);
1026                 data->fan1_div = data->fan1_div & AMC6821_CONF4_PSPR ? 4 : 2;
1027
1028                 data->pwm1_auto_point_pwm[0] = 0;
1029                 data->pwm1_auto_point_pwm[2] = 255;
1030                 data->pwm1_auto_point_pwm[1] = i2c_smbus_read_byte_data(client,
1031                         AMC6821_REG_DCY_LOW_TEMP);
1032
1033                 data->temp1_auto_point_temp[0] =
1034                         i2c_smbus_read_byte_data(client,
1035                                         AMC6821_REG_PSV_TEMP);
1036                 data->temp2_auto_point_temp[0] =
1037                                 data->temp1_auto_point_temp[0];
1038                 reg = i2c_smbus_read_byte_data(client,
1039                         AMC6821_REG_LTEMP_FAN_CTRL);
1040                 data->temp1_auto_point_temp[1] = (reg & 0xF8) >> 1;
1041                 reg &= 0x07;
1042                 reg = 0x20 >> reg;
1043                 if (reg > 0)
1044                         data->temp1_auto_point_temp[2] =
1045                                 data->temp1_auto_point_temp[1] +
1046                                 (data->pwm1_auto_point_pwm[2] -
1047                                 data->pwm1_auto_point_pwm[1]) / reg;
1048                 else
1049                         data->temp1_auto_point_temp[2] = 255;
1050
1051                 reg = i2c_smbus_read_byte_data(client,
1052                         AMC6821_REG_RTEMP_FAN_CTRL);
1053                 data->temp2_auto_point_temp[1] = (reg & 0xF8) >> 1;
1054                 reg &= 0x07;
1055                 reg = 0x20 >> reg;
1056                 if (reg > 0)
1057                         data->temp2_auto_point_temp[2] =
1058                                 data->temp2_auto_point_temp[1] +
1059                                 (data->pwm1_auto_point_pwm[2] -
1060                                 data->pwm1_auto_point_pwm[1]) / reg;
1061                 else
1062                         data->temp2_auto_point_temp[2] = 255;
1063
1064                 reg = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1);
1065                 reg = (reg >> 5) & 0x3;
1066                 switch (reg) {
1067                 case 0: /*open loop: software sets pwm1*/
1068                         data->pwm1_auto_channels_temp = 0;
1069                         data->pwm1_enable = 1;
1070                         break;
1071                 case 2: /*closed loop: remote T (temp2)*/
1072                         data->pwm1_auto_channels_temp = 2;
1073                         data->pwm1_enable = 2;
1074                         break;
1075                 case 3: /*closed loop: local and remote T (temp2)*/
1076                         data->pwm1_auto_channels_temp = 3;
1077                         data->pwm1_enable = 3;
1078                         break;
1079                 case 1: /*
1080                          * semi-open loop: software sets rpm, chip controls
1081                          * pwm1, currently not implemented
1082                          */
1083                         data->pwm1_auto_channels_temp = 0;
1084                         data->pwm1_enable = 0;
1085                         break;
1086                 }
1087
1088                 data->last_updated = jiffies;
1089                 data->valid = 1;
1090         }
1091         mutex_unlock(&data->update_lock);
1092         return data;
1093 }
1094
1095 module_i2c_driver(amc6821_driver);
1096
1097 MODULE_LICENSE("GPL");
1098 MODULE_AUTHOR("T. Mertelj <tomaz.mertelj@guest.arnes.si>");
1099 MODULE_DESCRIPTION("Texas Instruments amc6821 hwmon driver");