include/acpi/actypes.h

   1 /******************************************************************************
   2  *
   3  * Name: actypes.h - Common data types for the entire ACPI subsystem
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2014, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #ifndef __ACTYPES_H__
  45 #define __ACTYPES_H__
  46
  47 /* acpisrc:struct_defs -- for acpisrc conversion */
  48
  49 /*
  50  * ACPI_MACHINE_WIDTH must be specified in an OS- or compiler-dependent header
  51  * and must be either 32 or 64. 16-bit ACPICA is no longer supported, as of
  52  * 12/2006.
  53  */
  54 #ifndef ACPI_MACHINE_WIDTH
  55 #error ACPI_MACHINE_WIDTH not defined
  56 #endif
  57
  58 /*
  59  * Data type ranges
  60  * Note: These macros are designed to be compiler independent as well as
  61  * working around problems that some 32-bit compilers have with 64-bit
  62  * constants.
  63  */
  64 #define ACPI_UINT8_MAX                  (u8) (~((u8)  0))       /* 0xFF               */
  65 #define ACPI_UINT16_MAX                 (u16)(~((u16) 0))       /* 0xFFFF             */
  66 #define ACPI_UINT32_MAX                 (u32)(~((u32) 0))       /* 0xFFFFFFFF         */
  67 #define ACPI_UINT64_MAX                 (u64)(~((u64) 0))       /* 0xFFFFFFFFFFFFFFFF */
  68 #define ACPI_ASCII_MAX                  0x7F
  69
  70 /*
  71  * Architecture-specific ACPICA Subsystem Data Types
  72  *
  73  * The goal of these types is to provide source code portability across
  74  * 16-bit, 32-bit, and 64-bit targets.
  75  *
  76  * 1) The following types are of fixed size for all targets (16/32/64):
  77  *
  78  * u8           Logical boolean
  79  *
  80  * u8           8-bit  (1 byte) unsigned value
  81  * u16          16-bit (2 byte) unsigned value
  82  * u32          32-bit (4 byte) unsigned value
  83  * u64          64-bit (8 byte) unsigned value
  84  *
  85  * s16          16-bit (2 byte) signed value
  86  * s32          32-bit (4 byte) signed value
  87  * s64          64-bit (8 byte) signed value
  88  *
  89  * COMPILER_DEPENDENT_UINT64/s64 - These types are defined in the
  90  * compiler-dependent header(s) and were introduced because there is no common
  91  * 64-bit integer type across the various compilation models, as shown in
  92  * the table below.
  93  *
  94  * Datatype  LP64 ILP64 LLP64 ILP32 LP32 16bit
  95  * char      8    8     8     8     8    8
  96  * short     16   16    16    16    16   16
  97  * _int32         32
  98  * int       32   64    32    32    16   16
  99  * long      64   64    32    32    32   32
 100  * long long            64    64
 101  * pointer   64   64    64    32    32   32
 102  *
 103  * Note: ILP64 and LP32 are currently not supported.
 104  *
 105  *
 106  * 2) These types represent the native word size of the target mode of the
 107  * processor, and may be 16-bit, 32-bit, or 64-bit as required. They are
 108  * usually used for memory allocation, efficient loop counters, and array
 109  * indexes. The types are similar to the size_t type in the C library and are
 110  * required because there is no C type that consistently represents the native
 111  * data width. acpi_size is needed because there is no guarantee that a
 112  * kernel-level C library is present.
 113  *
 114  * acpi_size        16/32/64-bit unsigned value
 115  * acpi_native_int  16/32/64-bit signed value
 116  */
 117
 118 /*******************************************************************************
 119  *
 120  * Common types for all compilers, all targets
 121  *
 122  ******************************************************************************/
 123
 124 #ifndef ACPI_USE_SYSTEM_INTTYPES
 125
 126 typedef unsigned char u8;
 127 typedef unsigned char u8;
 128 typedef unsigned short u16;
 129 typedef short s16;
 130 typedef COMPILER_DEPENDENT_UINT64 u64;
 131 typedef COMPILER_DEPENDENT_INT64 s64;
 132
 133 #endif                          /* ACPI_USE_SYSTEM_INTTYPES */
 134
 135 /*
 136  * Value returned by acpi_os_get_thread_id. There is no standard "thread_id"
 137  * across operating systems or even the various UNIX systems. Since ACPICA
 138  * only needs the thread ID as a unique thread identifier, we use a u64
 139  * as the only common data type - it will accommodate any type of pointer or
 140  * any type of integer. It is up to the host-dependent OSL to cast the
 141  * native thread ID type to a u64 (in acpi_os_get_thread_id).
 142  */
 143 #define acpi_thread_id                  u64
 144
 145 /*******************************************************************************
 146  *
 147  * Types specific to 64-bit targets
 148  *
 149  ******************************************************************************/
 150
 151 #if ACPI_MACHINE_WIDTH == 64
 152
 153 #ifndef ACPI_USE_SYSTEM_INTTYPES
 154
 155 typedef unsigned int u32;
 156 typedef int s32;
 157
 158 #endif                          /* ACPI_USE_SYSTEM_INTTYPES */
 159
 160 typedef s64 acpi_native_int;
 161
 162 typedef u64 acpi_size;
 163 typedef u64 acpi_io_address;
 164 typedef u64 acpi_physical_address;
 165
 166 #define ACPI_MAX_PTR                    ACPI_UINT64_MAX
 167 #define ACPI_SIZE_MAX                   ACPI_UINT64_MAX
 168
 169 #define ACPI_USE_NATIVE_DIVIDE  /* Has native 64-bit integer support */
 170
 171 /*
 172  * In the case of the Itanium Processor Family (IPF), the hardware does not
 173  * support misaligned memory transfers. Set the MISALIGNMENT_NOT_SUPPORTED flag
 174  * to indicate that special precautions must be taken to avoid alignment faults.
 175  * (IA64 or ia64 is currently used by existing compilers to indicate IPF.)
 176  *
 177  * Note: EM64T and other X86-64 processors support misaligned transfers,
 178  * so there is no need to define this flag.
 179  */
 180 #if defined (__IA64__) || defined (__ia64__)
 181 #define ACPI_MISALIGNMENT_NOT_SUPPORTED
 182 #endif
 183
 184 /*******************************************************************************
 185  *
 186  * Types specific to 32-bit targets
 187  *
 188  ******************************************************************************/
 189
 190 #elif ACPI_MACHINE_WIDTH == 32
 191
 192 #ifndef ACPI_USE_SYSTEM_INTTYPES
 193
 194 typedef unsigned int u32;
 195 typedef int s32;
 196
 197 #endif                          /* ACPI_USE_SYSTEM_INTTYPES */
 198
 199 typedef s32 acpi_native_int;
 200
 201 typedef u32 acpi_size;
 202 typedef u32 acpi_io_address;
 203 typedef u32 acpi_physical_address;
 204
 205 #define ACPI_MAX_PTR                    ACPI_UINT32_MAX
 206 #define ACPI_SIZE_MAX                   ACPI_UINT32_MAX
 207
 208 #else
 209
 210 /* ACPI_MACHINE_WIDTH must be either 64 or 32 */
 211
 212 #error unknown ACPI_MACHINE_WIDTH
 213 #endif
 214
 215 /*******************************************************************************
 216  *
 217  * OS-dependent types
 218  *
 219  * If the defaults below are not appropriate for the host system, they can
 220  * be defined in the OS-specific header, and this will take precedence.
 221  *
 222  ******************************************************************************/
 223
 224 /* Flags for acpi_os_acquire_lock/acpi_os_release_lock */
 225
 226 #ifndef acpi_cpu_flags
 227 #define acpi_cpu_flags                  acpi_size
 228 #endif
 229
 230 /* Object returned from acpi_os_create_cache */
 231
 232 #ifndef acpi_cache_t
 233 #ifdef ACPI_USE_LOCAL_CACHE
 234 #define acpi_cache_t                    struct acpi_memory_list
 235 #else
 236 #define acpi_cache_t                    void *
 237 #endif
 238 #endif
 239
 240 /*
 241  * Synchronization objects - Mutexes, Semaphores, and spin_locks
 242  */
 243 #if (ACPI_MUTEX_TYPE == ACPI_BINARY_SEMAPHORE)
 244 /*
 245  * These macros are used if the host OS does not support a mutex object.
 246  * Map the OSL Mutex interfaces to binary semaphores.
 247  */
 248 #define acpi_mutex                      acpi_semaphore
 249 #define acpi_os_create_mutex(out_handle) acpi_os_create_semaphore (1, 1, out_handle)
 250 #define acpi_os_delete_mutex(handle)    (void) acpi_os_delete_semaphore (handle)
 251 #define acpi_os_acquire_mutex(handle,time) acpi_os_wait_semaphore (handle, 1, time)
 252 #define acpi_os_release_mutex(handle)   (void) acpi_os_signal_semaphore (handle, 1)
 253 #endif
 254
 255 /* Configurable types for synchronization objects */
 256
 257 #ifndef acpi_spinlock
 258 #define acpi_spinlock                   void *
 259 #endif
 260
 261 #ifndef acpi_semaphore
 262 #define acpi_semaphore                  void *
 263 #endif
 264
 265 #ifndef acpi_mutex
 266 #define acpi_mutex                      void *
 267 #endif
 268
 269 /*******************************************************************************
 270  *
 271  * Compiler-dependent types
 272  *
 273  * If the defaults below are not appropriate for the host compiler, they can
 274  * be defined in the compiler-specific header, and this will take precedence.
 275  *
 276  ******************************************************************************/
 277
 278 /* Use C99 uintptr_t for pointer casting if available, "void *" otherwise */
 279
 280 #ifndef acpi_uintptr_t
 281 #define acpi_uintptr_t                  void *
 282 #endif
 283
 284 /*
 285  * ACPI_PRINTF_LIKE is used to tag functions as "printf-like" because
 286  * some compilers can catch printf format string problems
 287  */
 288 #ifndef ACPI_PRINTF_LIKE
 289 #define ACPI_PRINTF_LIKE(c)
 290 #endif
 291
 292 /*
 293  * Some compilers complain about unused variables. Sometimes we don't want to
 294  * use all the variables (for example, _acpi_module_name). This allows us
 295  * to tell the compiler in a per-variable manner that a variable
 296  * is unused
 297  */
 298 #ifndef ACPI_UNUSED_VAR
 299 #define ACPI_UNUSED_VAR
 300 #endif
 301
 302 /*
 303  * All ACPICA external functions that are available to the rest of the kernel
 304  * are tagged with thes macros which can be defined as appropriate for the host.
 305  *
 306  * Notes:
 307  * ACPI_EXPORT_SYMBOL_INIT is used for initialization and termination
 308  * interfaces that may need special processing.
 309  * ACPI_EXPORT_SYMBOL is used for all other public external functions.
 310  */
 311 #ifndef ACPI_EXPORT_SYMBOL_INIT
 312 #define ACPI_EXPORT_SYMBOL_INIT(symbol)
 313 #endif
 314
 315 #ifndef ACPI_EXPORT_SYMBOL
 316 #define ACPI_EXPORT_SYMBOL(symbol)
 317 #endif
 318
 319 /*
 320  * Compiler/Clibrary-dependent debug initialization. Used for ACPICA
 321  * utilities only.
 322  */
 323 #ifndef ACPI_DEBUG_INITIALIZE
 324 #define ACPI_DEBUG_INITIALIZE()
 325 #endif
 326
 327 /*******************************************************************************
 328  *
 329  * Configuration
 330  *
 331  ******************************************************************************/
 332
 333 #ifdef ACPI_NO_MEM_ALLOCATIONS
 334
 335 #define ACPI_ALLOCATE(a)                NULL
 336 #define ACPI_ALLOCATE_ZEROED(a)         NULL
 337 #define ACPI_FREE(a)
 338 #define ACPI_MEM_TRACKING(a)
 339
 340 #else                           /* ACPI_NO_MEM_ALLOCATIONS */
 341
 342 #ifdef ACPI_DBG_TRACK_ALLOCATIONS
 343 /*
 344  * Memory allocation tracking (used by acpi_exec to detect memory leaks)
 345  */
 346 #define ACPI_MEM_PARAMETERS             _COMPONENT, _acpi_module_name, __LINE__
 347 #define ACPI_ALLOCATE(a)                acpi_ut_allocate_and_track ((acpi_size) (a), ACPI_MEM_PARAMETERS)
 348 #define ACPI_ALLOCATE_ZEROED(a)         acpi_ut_allocate_zeroed_and_track ((acpi_size) (a), ACPI_MEM_PARAMETERS)
 349 #define ACPI_FREE(a)                    acpi_ut_free_and_track (a, ACPI_MEM_PARAMETERS)
 350 #define ACPI_MEM_TRACKING(a)            a
 351
 352 #else
 353 /*
 354  * Normal memory allocation directly via the OS services layer
 355  */
 356 #define ACPI_ALLOCATE(a)                acpi_os_allocate ((acpi_size) (a))
 357 #define ACPI_ALLOCATE_ZEROED(a)         acpi_os_allocate_zeroed ((acpi_size) (a))
 358 #define ACPI_FREE(a)                    acpi_os_free (a)
 359 #define ACPI_MEM_TRACKING(a)
 360
 361 #endif                          /* ACPI_DBG_TRACK_ALLOCATIONS */
 362
 363 #endif                          /* ACPI_NO_MEM_ALLOCATIONS */
 364
 365 /******************************************************************************
 366  *
 367  * ACPI Specification constants (Do not change unless the specification changes)
 368  *
 369  *****************************************************************************/
 370
 371 /* Number of distinct FADT-based GPE register blocks (GPE0 and GPE1) */
 372
 373 #define ACPI_MAX_GPE_BLOCKS             2
 374
 375 /* Default ACPI register widths */
 376
 377 #define ACPI_GPE_REGISTER_WIDTH         8
 378 #define ACPI_PM1_REGISTER_WIDTH         16
 379 #define ACPI_PM2_REGISTER_WIDTH         8
 380 #define ACPI_PM_TIMER_WIDTH             32
 381 #define ACPI_RESET_REGISTER_WIDTH       8
 382
 383 /* Names within the namespace are 4 bytes long */
 384
 385 #define ACPI_NAME_SIZE                  4
 386 #define ACPI_PATH_SEGMENT_LENGTH        5       /* 4 chars for name + 1 char for separator */
 387 #define ACPI_PATH_SEPARATOR             '.'
 388
 389 /* Sizes for ACPI table headers */
 390
 391 #define ACPI_OEM_ID_SIZE                6
 392 #define ACPI_OEM_TABLE_ID_SIZE          8
 393
 394 /* ACPI/PNP hardware IDs */
 395
 396 #define PCI_ROOT_HID_STRING             "PNP0A03"
 397 #define PCI_EXPRESS_ROOT_HID_STRING     "PNP0A08"
 398
 399 /* PM Timer ticks per second (HZ) */
 400
 401 #define ACPI_PM_TIMER_FREQUENCY         3579545
 402
 403 /*******************************************************************************
 404  *
 405  * Independent types
 406  *
 407  ******************************************************************************/
 408
 409 /* Logical defines and NULL */
 410
 411 #ifdef FALSE
 412 #undef FALSE
 413 #endif
 414 #define FALSE                           (1 == 0)
 415
 416 #ifdef TRUE
 417 #undef TRUE
 418 #endif
 419 #define TRUE                            (1 == 1)
 420
 421 #ifndef NULL
 422 #define NULL                            (void *) 0
 423 #endif
 424
 425 /*
 426  * Miscellaneous types
 427  */
 428 typedef u32 acpi_status;        /* All ACPI Exceptions */
 429 typedef u32 acpi_name;          /* 4-byte ACPI name */
 430 typedef char *acpi_string;      /* Null terminated ASCII string */
 431 typedef void *acpi_handle;      /* Actually a ptr to a NS Node */
 432
 433 /* Time constants for timer calculations */
 434
 435 #define ACPI_MSEC_PER_SEC               1000L
 436
 437 #define ACPI_USEC_PER_MSEC              1000L
 438 #define ACPI_USEC_PER_SEC               1000000L
 439
 440 #define ACPI_100NSEC_PER_USEC           10L
 441 #define ACPI_100NSEC_PER_MSEC           10000L
 442 #define ACPI_100NSEC_PER_SEC            10000000L
 443
 444 #define ACPI_NSEC_PER_USEC              1000L
 445 #define ACPI_NSEC_PER_MSEC              1000000L
 446 #define ACPI_NSEC_PER_SEC               1000000000L
 447
 448 /* Owner IDs are used to track namespace nodes for selective deletion */
 449
 450 typedef u8 acpi_owner_id;
 451 #define ACPI_OWNER_ID_MAX               0xFF
 452
 453 #define ACPI_INTEGER_BIT_SIZE           64
 454 #define ACPI_MAX_DECIMAL_DIGITS         20      /* 2^64 = 18,446,744,073,709,551,616 */
 455
 456 #if ACPI_MACHINE_WIDTH == 64
 457 #define ACPI_USE_NATIVE_DIVIDE  /* Use compiler native 64-bit divide */
 458 #endif
 459
 460 #define ACPI_MAX64_DECIMAL_DIGITS       20
 461 #define ACPI_MAX32_DECIMAL_DIGITS       10
 462 #define ACPI_MAX16_DECIMAL_DIGITS        5
 463 #define ACPI_MAX8_DECIMAL_DIGITS         3
 464
 465 /*
 466  * Constants with special meanings
 467  */
 468 #define ACPI_ROOT_OBJECT                ACPI_ADD_PTR (acpi_handle, NULL, ACPI_MAX_PTR)
 469 #define ACPI_WAIT_FOREVER               0xFFFF  /* u16, as per ACPI spec */
 470 #define ACPI_DO_NOT_WAIT                0
 471
 472 /*
 473  * Obsolete: Acpi integer width. In ACPI version 1 (1996), integers are 32 bits.
 474  * In ACPI version 2 (2000) and later, integers are 64 bits. Note that this
 475  * pertains to the ACPI integer type only, not to other integers used in the
 476  * implementation of the ACPICA subsystem.
 477  *
 478  * 01/2010: This type is obsolete and has been removed from the entire ACPICA
 479  * code base. It remains here for compatibility with device drivers that use
 480  * the type. However, it will be removed in the future.
 481  */
 482 typedef u64 acpi_integer;
 483 #define ACPI_INTEGER_MAX                ACPI_UINT64_MAX
 484
 485 /*******************************************************************************
 486  *
 487  * Commonly used macros
 488  *
 489  ******************************************************************************/
 490
 491 /* Data manipulation */
 492
 493 #define ACPI_LOBYTE(integer)            ((u8)   (u16)(integer))
 494 #define ACPI_HIBYTE(integer)            ((u8) (((u16)(integer)) >> 8))
 495 #define ACPI_LOWORD(integer)            ((u16)  (u32)(integer))
 496 #define ACPI_HIWORD(integer)            ((u16)(((u32)(integer)) >> 16))
 497 #define ACPI_LODWORD(integer64)         ((u32)  (u64)(integer64))
 498 #define ACPI_HIDWORD(integer64)         ((u32)(((u64)(integer64)) >> 32))
 499
 500 #define ACPI_SET_BIT(target,bit)        ((target) |= (bit))
 501 #define ACPI_CLEAR_BIT(target,bit)      ((target) &= ~(bit))
 502 #define ACPI_MIN(a,b)                   (((a)<(b))?(a):(b))
 503 #define ACPI_MAX(a,b)                   (((a)>(b))?(a):(b))
 504
 505 /* Size calculation */
 506
 507 #define ACPI_ARRAY_LENGTH(x)            (sizeof(x) / sizeof((x)[0]))
 508
 509 /* Pointer manipulation */
 510
 511 #define ACPI_CAST_PTR(t, p)             ((t *) (acpi_uintptr_t) (p))
 512 #define ACPI_CAST_INDIRECT_PTR(t, p)    ((t **) (acpi_uintptr_t) (p))
 513 #define ACPI_ADD_PTR(t, a, b)           ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) + (acpi_size)(b)))
 514 #define ACPI_PTR_DIFF(a, b)             (acpi_size) (ACPI_CAST_PTR (u8, (a)) - ACPI_CAST_PTR (u8, (b)))
 515
 516 /* Pointer/Integer type conversions */
 517
 518 #define ACPI_TO_POINTER(i)              ACPI_ADD_PTR (void, (void *) NULL,(acpi_size) i)
 519 #define ACPI_TO_INTEGER(p)              ACPI_PTR_DIFF (p, (void *) NULL)
 520 #define ACPI_OFFSET(d, f)               ACPI_PTR_DIFF (&(((d *) 0)->f), (void *) NULL)
 521 #define ACPI_PHYSADDR_TO_PTR(i)         ACPI_TO_POINTER(i)
 522 #define ACPI_PTR_TO_PHYSADDR(i)         ACPI_TO_INTEGER(i)
 523
 524 /* Optimizations for 4-character (32-bit) acpi_name manipulation */
 525
 526 #ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
 527 #define ACPI_COMPARE_NAME(a,b)          (*ACPI_CAST_PTR (u32, (a)) == *ACPI_CAST_PTR (u32, (b)))
 528 #define ACPI_MOVE_NAME(dest,src)        (*ACPI_CAST_PTR (u32, (dest)) = *ACPI_CAST_PTR (u32, (src)))
 529 #else
 530 #define ACPI_COMPARE_NAME(a,b)          (!ACPI_STRNCMP (ACPI_CAST_PTR (char, (a)), ACPI_CAST_PTR (char, (b)), ACPI_NAME_SIZE))
 531 #define ACPI_MOVE_NAME(dest,src)        (ACPI_STRNCPY (ACPI_CAST_PTR (char, (dest)), ACPI_CAST_PTR (char, (src)), ACPI_NAME_SIZE))
 532 #endif
 533
 534 /* Support for the special RSDP signature (8 characters) */
 535
 536 #define ACPI_VALIDATE_RSDP_SIG(a)       (!ACPI_STRNCMP (ACPI_CAST_PTR (char, (a)), ACPI_SIG_RSDP, 8))
 537 #define ACPI_MAKE_RSDP_SIG(dest)        (ACPI_MEMCPY (ACPI_CAST_PTR (char, (dest)), ACPI_SIG_RSDP, 8))
 538
 539 /*******************************************************************************
 540  *
 541  * Miscellaneous constants
 542  *
 543  ******************************************************************************/
 544
 545 /*
 546  * Initialization sequence
 547  */
 548 #define ACPI_FULL_INITIALIZATION        0x00
 549 #define ACPI_NO_ADDRESS_SPACE_INIT      0x01
 550 #define ACPI_NO_HARDWARE_INIT           0x02
 551 #define ACPI_NO_EVENT_INIT              0x04
 552 #define ACPI_NO_HANDLER_INIT            0x08
 553 #define ACPI_NO_ACPI_ENABLE             0x10
 554 #define ACPI_NO_DEVICE_INIT             0x20
 555 #define ACPI_NO_OBJECT_INIT             0x40
 556
 557 /*
 558  * Initialization state
 559  */
 560 #define ACPI_SUBSYSTEM_INITIALIZE       0x01
 561 #define ACPI_INITIALIZED_OK             0x02
 562
 563 /*
 564  * Power state values
 565  */
 566 #define ACPI_STATE_UNKNOWN              (u8) 0xFF
 567
 568 #define ACPI_STATE_S0                   (u8) 0
 569 #define ACPI_STATE_S1                   (u8) 1
 570 #define ACPI_STATE_S2                   (u8) 2
 571 #define ACPI_STATE_S3                   (u8) 3
 572 #define ACPI_STATE_S4                   (u8) 4
 573 #define ACPI_STATE_S5                   (u8) 5
 574 #define ACPI_S_STATES_MAX               ACPI_STATE_S5
 575 #define ACPI_S_STATE_COUNT              6
 576
 577 #define ACPI_STATE_D0                   (u8) 0
 578 #define ACPI_STATE_D1                   (u8) 1
 579 #define ACPI_STATE_D2                   (u8) 2
 580 #define ACPI_STATE_D3_HOT               (u8) 3
 581 #define ACPI_STATE_D3                   (u8) 4
 582 #define ACPI_STATE_D3_COLD              ACPI_STATE_D3
 583 #define ACPI_D_STATES_MAX               ACPI_STATE_D3
 584 #define ACPI_D_STATE_COUNT              5
 585
 586 #define ACPI_STATE_C0                   (u8) 0
 587 #define ACPI_STATE_C1                   (u8) 1
 588 #define ACPI_STATE_C2                   (u8) 2
 589 #define ACPI_STATE_C3                   (u8) 3
 590 #define ACPI_C_STATES_MAX               ACPI_STATE_C3
 591 #define ACPI_C_STATE_COUNT              4
 592
 593 /*
 594  * Sleep type invalid value
 595  */
 596 #define ACPI_SLEEP_TYPE_MAX             0x7
 597 #define ACPI_SLEEP_TYPE_INVALID         0xFF
 598
 599 /*
 600  * Standard notify values
 601  */
 602 #define ACPI_NOTIFY_BUS_CHECK           (u8) 0x00
 603 #define ACPI_NOTIFY_DEVICE_CHECK        (u8) 0x01
 604 #define ACPI_NOTIFY_DEVICE_WAKE         (u8) 0x02
 605 #define ACPI_NOTIFY_EJECT_REQUEST       (u8) 0x03
 606 #define ACPI_NOTIFY_DEVICE_CHECK_LIGHT  (u8) 0x04
 607 #define ACPI_NOTIFY_FREQUENCY_MISMATCH  (u8) 0x05
 608 #define ACPI_NOTIFY_BUS_MODE_MISMATCH   (u8) 0x06
 609 #define ACPI_NOTIFY_POWER_FAULT         (u8) 0x07
 610 #define ACPI_NOTIFY_CAPABILITIES_CHECK  (u8) 0x08
 611 #define ACPI_NOTIFY_DEVICE_PLD_CHECK    (u8) 0x09
 612 #define ACPI_NOTIFY_RESERVED            (u8) 0x0A
 613 #define ACPI_NOTIFY_LOCALITY_UPDATE     (u8) 0x0B
 614 #define ACPI_NOTIFY_SHUTDOWN_REQUEST    (u8) 0x0C
 615 #define ACPI_NOTIFY_AFFINITY_UPDATE     (u8) 0x0D
 616
 617 #define ACPI_NOTIFY_MAX                 0x0D
 618
 619 /*
 620  * Types associated with ACPI names and objects. The first group of
 621  * values (up to ACPI_TYPE_EXTERNAL_MAX) correspond to the definition
 622  * of the ACPI object_type() operator (See the ACPI Spec). Therefore,
 623  * only add to the first group if the spec changes.
 624  *
 625  * NOTE: Types must be kept in sync with the global acpi_ns_properties
 626  * and acpi_ns_type_names arrays.
 627  */
 628 typedef u32 acpi_object_type;
 629
 630 #define ACPI_TYPE_ANY                   0x00
 631 #define ACPI_TYPE_INTEGER               0x01    /* Byte/Word/Dword/Zero/One/Ones */
 632 #define ACPI_TYPE_STRING                0x02
 633 #define ACPI_TYPE_BUFFER                0x03
 634 #define ACPI_TYPE_PACKAGE               0x04    /* byte_const, multiple data_term/Constant/super_name */
 635 #define ACPI_TYPE_FIELD_UNIT            0x05
 636 #define ACPI_TYPE_DEVICE                0x06    /* Name, multiple Node */
 637 #define ACPI_TYPE_EVENT                 0x07
 638 #define ACPI_TYPE_METHOD                0x08    /* Name, byte_const, multiple Code */
 639 #define ACPI_TYPE_MUTEX                 0x09
 640 #define ACPI_TYPE_REGION                0x0A
 641 #define ACPI_TYPE_POWER                 0x0B    /* Name,byte_const,word_const,multi Node */
 642 #define ACPI_TYPE_PROCESSOR             0x0C    /* Name,byte_const,Dword_const,byte_const,multi nm_o */
 643 #define ACPI_TYPE_THERMAL               0x0D    /* Name, multiple Node */
 644 #define ACPI_TYPE_BUFFER_FIELD          0x0E
 645 #define ACPI_TYPE_DDB_HANDLE            0x0F
 646 #define ACPI_TYPE_DEBUG_OBJECT          0x10
 647
 648 #define ACPI_TYPE_EXTERNAL_MAX          0x10
 649
 650 /*
 651  * These are object types that do not map directly to the ACPI
 652  * object_type() operator. They are used for various internal purposes only.
 653  * If new predefined ACPI_TYPEs are added (via the ACPI specification), these
 654  * internal types must move upwards. (There is code that depends on these
 655  * values being contiguous with the external types above.)
 656  */
 657 #define ACPI_TYPE_LOCAL_REGION_FIELD    0x11
 658 #define ACPI_TYPE_LOCAL_BANK_FIELD      0x12
 659 #define ACPI_TYPE_LOCAL_INDEX_FIELD     0x13
 660 #define ACPI_TYPE_LOCAL_REFERENCE       0x14    /* Arg#, Local#, Name, Debug, ref_of, Index */
 661 #define ACPI_TYPE_LOCAL_ALIAS           0x15
 662 #define ACPI_TYPE_LOCAL_METHOD_ALIAS    0x16
 663 #define ACPI_TYPE_LOCAL_NOTIFY          0x17
 664 #define ACPI_TYPE_LOCAL_ADDRESS_HANDLER 0x18
 665 #define ACPI_TYPE_LOCAL_RESOURCE        0x19
 666 #define ACPI_TYPE_LOCAL_RESOURCE_FIELD  0x1A
 667 #define ACPI_TYPE_LOCAL_SCOPE           0x1B    /* 1 Name, multiple object_list Nodes */
 668
 669 #define ACPI_TYPE_NS_NODE_MAX           0x1B    /* Last typecode used within a NS Node */
 670
 671 /*
 672  * These are special object types that never appear in
 673  * a Namespace node, only in an object of union acpi_operand_object
 674  */
 675 #define ACPI_TYPE_LOCAL_EXTRA           0x1C
 676 #define ACPI_TYPE_LOCAL_DATA            0x1D
 677
 678 #define ACPI_TYPE_LOCAL_MAX             0x1D
 679
 680 /* All types above here are invalid */
 681
 682 #define ACPI_TYPE_INVALID               0x1E
 683 #define ACPI_TYPE_NOT_FOUND             0xFF
 684
 685 #define ACPI_NUM_NS_TYPES               (ACPI_TYPE_INVALID + 1)
 686
 687 /*
 688  * All I/O
 689  */
 690 #define ACPI_READ                       0
 691 #define ACPI_WRITE                      1
 692 #define ACPI_IO_MASK                    1
 693
 694 /*
 695  * Event Types: Fixed & General Purpose
 696  */
 697 typedef u32 acpi_event_type;
 698
 699 /*
 700  * Fixed events
 701  */
 702 #define ACPI_EVENT_PMTIMER              0
 703 #define ACPI_EVENT_GLOBAL               1
 704 #define ACPI_EVENT_POWER_BUTTON         2
 705 #define ACPI_EVENT_SLEEP_BUTTON         3
 706 #define ACPI_EVENT_RTC                  4
 707 #define ACPI_EVENT_MAX                  4
 708 #define ACPI_NUM_FIXED_EVENTS           ACPI_EVENT_MAX + 1
 709
 710 /*
 711  * Event status - Per event
 712  * -------------
 713  * The encoding of acpi_event_status is illustrated below.
 714  * Note that a set bit (1) indicates the property is TRUE
 715  * (e.g. if bit 0 is set then the event is enabled).
 716  * +-------------+-+-+-+-+
 717  * |   Bits 31:4 |3|2|1|0|
 718  * +-------------+-+-+-+-+
 719  *          |     | | | |
 720  *          |     | | | +- Enabled?
 721  *          |     | | +--- Enabled for wake?
 722  *          |     | +----- Set?
 723  *          |     +------- Has a handler?
 724  *          +------------- <Reserved>
 725  */
 726 typedef u32 acpi_event_status;
 727
 728 #define ACPI_EVENT_FLAG_DISABLED        (acpi_event_status) 0x00
 729 #define ACPI_EVENT_FLAG_ENABLED         (acpi_event_status) 0x01
 730 #define ACPI_EVENT_FLAG_WAKE_ENABLED    (acpi_event_status) 0x02
 731 #define ACPI_EVENT_FLAG_SET             (acpi_event_status) 0x04
 732 #define ACPI_EVENT_FLAG_HAS_HANDLER     (acpi_event_status) 0x08
 733
 734 /* Actions for acpi_set_gpe, acpi_gpe_wakeup, acpi_hw_low_set_gpe */
 735
 736 #define ACPI_GPE_ENABLE                 0
 737 #define ACPI_GPE_DISABLE                1
 738 #define ACPI_GPE_CONDITIONAL_ENABLE     2
 739 #define ACPI_GPE_SAVE_MASK              4
 740
 741 #define ACPI_GPE_ENABLE_SAVE            (ACPI_GPE_ENABLE | ACPI_GPE_SAVE_MASK)
 742 #define ACPI_GPE_DISABLE_SAVE           (ACPI_GPE_DISABLE | ACPI_GPE_SAVE_MASK)
 743
 744 /*
 745  * GPE info flags - Per GPE
 746  * +-------+-+-+---+
 747  * |  7:4  |3|2|1:0|
 748  * +-------+-+-+---+
 749  *     |    | |  |
 750  *     |    | |  +-- Type of dispatch:to method, handler, notify, or none
 751  *     |    | +----- Interrupt type: edge or level triggered
 752  *     |    +------- Is a Wake GPE
 753  *     +------------ <Reserved>
 754  */
 755 #define ACPI_GPE_DISPATCH_NONE          (u8) 0x00
 756 #define ACPI_GPE_DISPATCH_METHOD        (u8) 0x01
 757 #define ACPI_GPE_DISPATCH_HANDLER       (u8) 0x02
 758 #define ACPI_GPE_DISPATCH_NOTIFY        (u8) 0x03
 759 #define ACPI_GPE_DISPATCH_MASK          (u8) 0x03
 760
 761 #define ACPI_GPE_LEVEL_TRIGGERED        (u8) 0x04
 762 #define ACPI_GPE_EDGE_TRIGGERED         (u8) 0x00
 763 #define ACPI_GPE_XRUPT_TYPE_MASK        (u8) 0x04
 764
 765 #define ACPI_GPE_CAN_WAKE               (u8) 0x08
 766
 767 /*
 768  * Flags for GPE and Lock interfaces
 769  */
 770 #define ACPI_NOT_ISR                    0x1
 771 #define ACPI_ISR                        0x0
 772
 773 /* Notify types */
 774
 775 #define ACPI_SYSTEM_NOTIFY              0x1
 776 #define ACPI_DEVICE_NOTIFY              0x2
 777 #define ACPI_ALL_NOTIFY                 (ACPI_SYSTEM_NOTIFY | ACPI_DEVICE_NOTIFY)
 778 #define ACPI_MAX_NOTIFY_HANDLER_TYPE    0x3
 779 #define ACPI_NUM_NOTIFY_TYPES           2
 780
 781 #define ACPI_MAX_SYS_NOTIFY             0x7F
 782 #define ACPI_MAX_DEVICE_SPECIFIC_NOTIFY 0xBF
 783
 784 #define ACPI_SYSTEM_HANDLER_LIST        0       /* Used as index, must be SYSTEM_NOTIFY -1 */
 785 #define ACPI_DEVICE_HANDLER_LIST        1       /* Used as index, must be DEVICE_NOTIFY -1 */
 786
 787 /* Address Space (Operation Region) Types */
 788
 789 typedef u8 acpi_adr_space_type;
 790
 791 #define ACPI_ADR_SPACE_SYSTEM_MEMORY    (acpi_adr_space_type) 0
 792 #define ACPI_ADR_SPACE_SYSTEM_IO        (acpi_adr_space_type) 1
 793 #define ACPI_ADR_SPACE_PCI_CONFIG       (acpi_adr_space_type) 2
 794 #define ACPI_ADR_SPACE_EC               (acpi_adr_space_type) 3
 795 #define ACPI_ADR_SPACE_SMBUS            (acpi_adr_space_type) 4
 796 #define ACPI_ADR_SPACE_CMOS             (acpi_adr_space_type) 5
 797 #define ACPI_ADR_SPACE_PCI_BAR_TARGET   (acpi_adr_space_type) 6
 798 #define ACPI_ADR_SPACE_IPMI             (acpi_adr_space_type) 7
 799 #define ACPI_ADR_SPACE_GPIO             (acpi_adr_space_type) 8
 800 #define ACPI_ADR_SPACE_GSBUS            (acpi_adr_space_type) 9
 801 #define ACPI_ADR_SPACE_PLATFORM_COMM    (acpi_adr_space_type) 10
 802
 803 #define ACPI_NUM_PREDEFINED_REGIONS     11
 804
 805 /*
 806  * Special Address Spaces
 807  *
 808  * Note: A Data Table region is a special type of operation region
 809  * that has its own AML opcode. However, internally, the AML
 810  * interpreter simply creates an operation region with an an address
 811  * space type of ACPI_ADR_SPACE_DATA_TABLE.
 812  */
 813 #define ACPI_ADR_SPACE_DATA_TABLE       (acpi_adr_space_type) 0x7E      /* Internal to ACPICA only */
 814 #define ACPI_ADR_SPACE_FIXED_HARDWARE   (acpi_adr_space_type) 0x7F
 815
 816 /* Values for _REG connection code */
 817
 818 #define ACPI_REG_DISCONNECT             0
 819 #define ACPI_REG_CONNECT                1
 820
 821 /*
 822  * bit_register IDs
 823  *
 824  * These values are intended to be used by the hardware interfaces
 825  * and are mapped to individual bitfields defined within the ACPI
 826  * registers. See the acpi_gbl_bit_register_info global table in utglobal.c
 827  * for this mapping.
 828  */
 829
 830 /* PM1 Status register */
 831
 832 #define ACPI_BITREG_TIMER_STATUS                0x00
 833 #define ACPI_BITREG_BUS_MASTER_STATUS           0x01
 834 #define ACPI_BITREG_GLOBAL_LOCK_STATUS          0x02
 835 #define ACPI_BITREG_POWER_BUTTON_STATUS         0x03
 836 #define ACPI_BITREG_SLEEP_BUTTON_STATUS         0x04
 837 #define ACPI_BITREG_RT_CLOCK_STATUS             0x05
 838 #define ACPI_BITREG_WAKE_STATUS                 0x06
 839 #define ACPI_BITREG_PCIEXP_WAKE_STATUS          0x07
 840
 841 /* PM1 Enable register */
 842
 843 #define ACPI_BITREG_TIMER_ENABLE                0x08
 844 #define ACPI_BITREG_GLOBAL_LOCK_ENABLE          0x09
 845 #define ACPI_BITREG_POWER_BUTTON_ENABLE         0x0A
 846 #define ACPI_BITREG_SLEEP_BUTTON_ENABLE         0x0B
 847 #define ACPI_BITREG_RT_CLOCK_ENABLE             0x0C
 848 #define ACPI_BITREG_PCIEXP_WAKE_DISABLE         0x0D
 849
 850 /* PM1 Control register */
 851
 852 #define ACPI_BITREG_SCI_ENABLE                  0x0E
 853 #define ACPI_BITREG_BUS_MASTER_RLD              0x0F
 854 #define ACPI_BITREG_GLOBAL_LOCK_RELEASE         0x10
 855 #define ACPI_BITREG_SLEEP_TYPE                  0x11
 856 #define ACPI_BITREG_SLEEP_ENABLE                0x12
 857
 858 /* PM2 Control register */
 859
 860 #define ACPI_BITREG_ARB_DISABLE                 0x13
 861
 862 #define ACPI_BITREG_MAX                         0x13
 863 #define ACPI_NUM_BITREG                         ACPI_BITREG_MAX + 1
 864
 865 /* Status register values. A 1 clears a status bit. 0 = no effect */
 866
 867 #define ACPI_CLEAR_STATUS                       1
 868
 869 /* Enable and Control register values */
 870
 871 #define ACPI_ENABLE_EVENT                       1
 872 #define ACPI_DISABLE_EVENT                      0
 873
 874 /* Sleep function dispatch */
 875
 876 typedef acpi_status(*acpi_sleep_function) (u8 sleep_state);
 877
 878 struct acpi_sleep_functions {
 879         acpi_sleep_function legacy_function;
 880         acpi_sleep_function extended_function;
 881 };
 882
 883 /*
 884  * External ACPI object definition
 885  */
 886
 887 /*
 888  * Note: Type == ACPI_TYPE_ANY (0) is used to indicate a NULL package element
 889  * or an unresolved named reference.
 890  */
 891 union acpi_object {
 892         acpi_object_type type;  /* See definition of acpi_ns_type for values */
 893         struct {
 894                 acpi_object_type type;  /* ACPI_TYPE_INTEGER */
 895                 u64 value;      /* The actual number */
 896         } integer;
 897
 898         struct {
 899                 acpi_object_type type;  /* ACPI_TYPE_STRING */
 900                 u32 length;     /* # of bytes in string, excluding trailing null */
 901                 char *pointer;  /* points to the string value */
 902         } string;
 903
 904         struct {
 905                 acpi_object_type type;  /* ACPI_TYPE_BUFFER */
 906                 u32 length;     /* # of bytes in buffer */
 907                 u8 *pointer;    /* points to the buffer */
 908         } buffer;
 909
 910         struct {
 911                 acpi_object_type type;  /* ACPI_TYPE_PACKAGE */
 912                 u32 count;      /* # of elements in package */
 913                 union acpi_object *elements;    /* Pointer to an array of ACPI_OBJECTs */
 914         } package;
 915
 916         struct {
 917                 acpi_object_type type;  /* ACPI_TYPE_LOCAL_REFERENCE */
 918                 acpi_object_type actual_type;   /* Type associated with the Handle */
 919                 acpi_handle handle;     /* object reference */
 920         } reference;
 921
 922         struct {
 923                 acpi_object_type type;  /* ACPI_TYPE_PROCESSOR */
 924                 u32 proc_id;
 925                 acpi_io_address pblk_address;
 926                 u32 pblk_length;
 927         } processor;
 928
 929         struct {
 930                 acpi_object_type type;  /* ACPI_TYPE_POWER */
 931                 u32 system_level;
 932                 u32 resource_order;
 933         } power_resource;
 934 };
 935
 936 /*
 937  * List of objects, used as a parameter list for control method evaluation
 938  */
 939 struct acpi_object_list {
 940         u32 count;
 941         union acpi_object *pointer;
 942 };
 943
 944 /*
 945  * Miscellaneous common Data Structures used by the interfaces
 946  */
 947 #define ACPI_NO_BUFFER              0
 948
 949 #ifdef ACPI_NO_MEM_ALLOCATIONS
 950
 951 #define ACPI_ALLOCATE_BUFFER        (acpi_size) (0)
 952 #define ACPI_ALLOCATE_LOCAL_BUFFER  (acpi_size) (0)
 953
 954 #else                           /* ACPI_NO_MEM_ALLOCATIONS */
 955
 956 #define ACPI_ALLOCATE_BUFFER        (acpi_size) (-1)    /* Let ACPICA allocate buffer */
 957 #define ACPI_ALLOCATE_LOCAL_BUFFER  (acpi_size) (-2)    /* For internal use only (enables tracking) */
 958
 959 #endif                          /* ACPI_NO_MEM_ALLOCATIONS */
 960
 961 struct acpi_buffer {
 962         acpi_size length;       /* Length in bytes of the buffer */
 963         void *pointer;          /* pointer to buffer */
 964 };
 965
 966 /*
 967  * name_type for acpi_get_name
 968  */
 969 #define ACPI_FULL_PATHNAME              0
 970 #define ACPI_SINGLE_NAME                1
 971 #define ACPI_NAME_TYPE_MAX              1
 972
 973 /*
 974  * Predefined Namespace items
 975  */
 976 struct acpi_predefined_names {
 977         char *name;
 978         u8 type;
 979         char *val;
 980 };
 981
 982 /*
 983  * Structure and flags for acpi_get_system_info
 984  */
 985 #define ACPI_SYS_MODE_UNKNOWN           0x0000
 986 #define ACPI_SYS_MODE_ACPI              0x0001
 987 #define ACPI_SYS_MODE_LEGACY            0x0002
 988 #define ACPI_SYS_MODES_MASK             0x0003
 989
 990 /*
 991  * System info returned by acpi_get_system_info()
 992  */
 993 struct acpi_system_info {
 994         u32 acpi_ca_version;
 995         u32 flags;
 996         u32 timer_resolution;
 997         u32 reserved1;
 998         u32 reserved2;
 999         u32 debug_level;
1000         u32 debug_layer;
1001 };
1002
1003 /*
1004  * System statistics returned by acpi_get_statistics()
1005  */
1006 struct acpi_statistics {
1007         u32 sci_count;
1008         u32 gpe_count;
1009         u32 fixed_event_count[ACPI_NUM_FIXED_EVENTS];
1010         u32 method_count;
1011 };
1012
1013 /* Table Event Types */
1014
1015 #define ACPI_TABLE_EVENT_LOAD           0x0
1016 #define ACPI_TABLE_EVENT_UNLOAD         0x1
1017 #define ACPI_NUM_TABLE_EVENTS           2
1018
1019 /*
1020  * Types specific to the OS service interfaces
1021  */
1022 typedef u32
1023  (ACPI_SYSTEM_XFACE * acpi_osd_handler) (void *context);
1024
1025 typedef void
1026  (ACPI_SYSTEM_XFACE * acpi_osd_exec_callback) (void *context);
1027
1028 /*
1029  * Various handlers and callback procedures
1030  */
1031 typedef
1032 u32 (*acpi_sci_handler) (void *context);
1033
1034 typedef
1035 void (*acpi_gbl_event_handler) (u32 event_type,
1036                                acpi_handle device,
1037                                u32 event_number, void *context);
1038
1039 #define ACPI_EVENT_TYPE_GPE         0
1040 #define ACPI_EVENT_TYPE_FIXED       1
1041
1042 typedef
1043 u32(*acpi_event_handler) (void *context);
1044
1045 typedef
1046 u32 (*acpi_gpe_handler) (acpi_handle gpe_device, u32 gpe_number, void *context);
1047
1048 typedef
1049 void (*acpi_notify_handler) (acpi_handle device, u32 value, void *context);
1050
1051 typedef
1052 void (*acpi_object_handler) (acpi_handle object, void *data);
1053
1054 typedef acpi_status(*acpi_init_handler) (acpi_handle object, u32 function);
1055
1056 #define ACPI_INIT_DEVICE_INI        1
1057
1058 typedef
1059 acpi_status(*acpi_exception_handler) (acpi_status aml_status,
1060                                       acpi_name name,
1061                                       u16 opcode,
1062                                       u32 aml_offset, void *context);
1063
1064 /* Table Event handler (Load, load_table, etc.) and types */
1065
1066 typedef
1067 acpi_status(*acpi_table_handler) (u32 event, void *table, void *context);
1068
1069 #define ACPI_TABLE_LOAD             0x0
1070 #define ACPI_TABLE_UNLOAD           0x1
1071 #define ACPI_NUM_TABLE_EVENTS       2
1072
1073 /* Address Spaces (For Operation Regions) */
1074
1075 typedef
1076 acpi_status(*acpi_adr_space_handler) (u32 function,
1077                                       acpi_physical_address address,
1078                                       u32 bit_width,
1079                                       u64 *value,
1080                                       void *handler_context,
1081                                       void *region_context);
1082
1083 #define ACPI_DEFAULT_HANDLER            NULL
1084
1085 /* Special Context data for generic_serial_bus/general_purpose_io (ACPI 5.0) */
1086
1087 struct acpi_connection_info {
1088         u8 *connection;
1089         u16 length;
1090         u8 access_length;
1091 };
1092
1093 typedef
1094 acpi_status(*acpi_adr_space_setup) (acpi_handle region_handle,
1095                                     u32 function,
1096                                     void *handler_context,
1097                                     void **region_context);
1098
1099 #define ACPI_REGION_ACTIVATE    0
1100 #define ACPI_REGION_DEACTIVATE  1
1101
1102 typedef
1103 acpi_status(*acpi_walk_callback) (acpi_handle object,
1104                                   u32 nesting_level,
1105                                   void *context, void **return_value);
1106
1107 typedef
1108 u32 (*acpi_interface_handler) (acpi_string interface_name, u32 supported);
1109
1110 /* Interrupt handler return values */
1111
1112 #define ACPI_INTERRUPT_NOT_HANDLED      0x00
1113 #define ACPI_INTERRUPT_HANDLED          0x01
1114
1115 /* GPE handler return values */
1116
1117 #define ACPI_REENABLE_GPE               0x80
1118
1119 /* Length of 32-bit EISAID values when converted back to a string */
1120
1121 #define ACPI_EISAID_STRING_SIZE         8       /* Includes null terminator */
1122
1123 /* Length of UUID (string) values */
1124
1125 #define ACPI_UUID_LENGTH                16
1126
1127 /* Structures used for device/processor HID, UID, CID, and SUB */
1128
1129 struct acpi_pnp_device_id {
1130         u32 length;             /* Length of string + null */
1131         char *string;
1132 };
1133
1134 struct acpi_pnp_device_id_list {
1135         u32 count;              /* Number of IDs in Ids array */
1136         u32 list_size;          /* Size of list, including ID strings */
1137         struct acpi_pnp_device_id ids[1];       /* ID array */
1138 };
1139
1140 /*
1141  * Structure returned from acpi_get_object_info.
1142  * Optimized for both 32- and 64-bit builds
1143  */
1144 struct acpi_device_info {
1145         u32 info_size;          /* Size of info, including ID strings */
1146         u32 name;               /* ACPI object Name */
1147         acpi_object_type type;  /* ACPI object Type */
1148         u8 param_count;         /* If a method, required parameter count */
1149         u8 valid;               /* Indicates which optional fields are valid */
1150         u8 flags;               /* Miscellaneous info */
1151         u8 highest_dstates[4];  /* _sx_d values: 0xFF indicates not valid */
1152         u8 lowest_dstates[5];   /* _sx_w values: 0xFF indicates not valid */
1153         u32 current_status;     /* _STA value */
1154         u64 address;    /* _ADR value */
1155         struct acpi_pnp_device_id hardware_id;  /* _HID value */
1156         struct acpi_pnp_device_id unique_id;    /* _UID value */
1157         struct acpi_pnp_device_id subsystem_id; /* _SUB value */
1158         struct acpi_pnp_device_id_list compatible_id_list;      /* _CID list <must be last> */
1159 };
1160
1161 /* Values for Flags field above (acpi_get_object_info) */
1162
1163 #define ACPI_PCI_ROOT_BRIDGE            0x01
1164
1165 /* Flags for Valid field above (acpi_get_object_info) */
1166
1167 #define ACPI_VALID_STA                  0x01
1168 #define ACPI_VALID_ADR                  0x02
1169 #define ACPI_VALID_HID                  0x04
1170 #define ACPI_VALID_UID                  0x08
1171 #define ACPI_VALID_SUB                  0x10
1172 #define ACPI_VALID_CID                  0x20
1173 #define ACPI_VALID_SXDS                 0x40
1174 #define ACPI_VALID_SXWS                 0x80
1175
1176 /* Flags for _STA return value (current_status above) */
1177
1178 #define ACPI_STA_DEVICE_PRESENT         0x01
1179 #define ACPI_STA_DEVICE_ENABLED         0x02
1180 #define ACPI_STA_DEVICE_UI              0x04
1181 #define ACPI_STA_DEVICE_FUNCTIONING     0x08
1182 #define ACPI_STA_DEVICE_OK              0x08    /* Synonym */
1183 #define ACPI_STA_BATTERY_PRESENT        0x10
1184
1185 /* Context structs for address space handlers */
1186
1187 struct acpi_pci_id {
1188         u16 segment;
1189         u16 bus;
1190         u16 device;
1191         u16 function;
1192 };
1193
1194 struct acpi_mem_space_context {
1195         u32 length;
1196         acpi_physical_address address;
1197         acpi_physical_address mapped_physical_address;
1198         u8 *mapped_logical_address;
1199         acpi_size mapped_length;
1200 };
1201
1202 /*
1203  * struct acpi_memory_list is used only if the ACPICA local cache is enabled
1204  */
1205 struct acpi_memory_list {
1206         char *list_name;
1207         void *list_head;
1208         u16 object_size;
1209         u16 max_depth;
1210         u16 current_depth;
1211
1212 #ifdef ACPI_DBG_TRACK_ALLOCATIONS
1213
1214         /* Statistics for debug memory tracking only */
1215
1216         u32 total_allocated;
1217         u32 total_freed;
1218         u32 max_occupied;
1219         u32 total_size;
1220         u32 current_total_size;
1221         u32 requests;
1222         u32 hits;
1223 #endif
1224 };
1225
1226 /* Definitions of _OSI support */
1227
1228 #define ACPI_VENDOR_STRINGS                 0x01
1229 #define ACPI_FEATURE_STRINGS                0x02
1230 #define ACPI_ENABLE_INTERFACES              0x00
1231 #define ACPI_DISABLE_INTERFACES             0x04
1232
1233 #define ACPI_DISABLE_ALL_VENDOR_STRINGS     (ACPI_DISABLE_INTERFACES | ACPI_VENDOR_STRINGS)
1234 #define ACPI_DISABLE_ALL_FEATURE_STRINGS    (ACPI_DISABLE_INTERFACES | ACPI_FEATURE_STRINGS)
1235 #define ACPI_DISABLE_ALL_STRINGS            (ACPI_DISABLE_INTERFACES | ACPI_VENDOR_STRINGS | ACPI_FEATURE_STRINGS)
1236 #define ACPI_ENABLE_ALL_VENDOR_STRINGS      (ACPI_ENABLE_INTERFACES | ACPI_VENDOR_STRINGS)
1237 #define ACPI_ENABLE_ALL_FEATURE_STRINGS     (ACPI_ENABLE_INTERFACES | ACPI_FEATURE_STRINGS)
1238 #define ACPI_ENABLE_ALL_STRINGS             (ACPI_ENABLE_INTERFACES | ACPI_VENDOR_STRINGS | ACPI_FEATURE_STRINGS)
1239
1240 #define ACPI_OSI_WIN_2000               0x01
1241 #define ACPI_OSI_WIN_XP                 0x02
1242 #define ACPI_OSI_WIN_XP_SP1             0x03
1243 #define ACPI_OSI_WINSRV_2003            0x04
1244 #define ACPI_OSI_WIN_XP_SP2             0x05
1245 #define ACPI_OSI_WINSRV_2003_SP1        0x06
1246 #define ACPI_OSI_WIN_VISTA              0x07
1247 #define ACPI_OSI_WINSRV_2008            0x08
1248 #define ACPI_OSI_WIN_VISTA_SP1          0x09
1249 #define ACPI_OSI_WIN_VISTA_SP2          0x0A
1250 #define ACPI_OSI_WIN_7                  0x0B
1251 #define ACPI_OSI_WIN_8                  0x0C
1252
1253 /* Definitions of file IO */
1254
1255 #define ACPI_FILE_READING               0x01
1256 #define ACPI_FILE_WRITING               0x02
1257 #define ACPI_FILE_BINARY                0x04
1258
1259 #define ACPI_FILE_BEGIN                 0x01
1260 #define ACPI_FILE_END                   0x02
1261
1262 /* Definitions of getopt */
1263
1264 #define ACPI_OPT_END                    -1
1265
1266 #endif                          /* __ACTYPES_H__ */