drivers/cpufreq/s3c24xx-cpufreq.c

   1 /*
   2  * Copyright (c) 2006-2008 Simtec Electronics
   3  *      http://armlinux.simtec.co.uk/
   4  *      Ben Dooks <ben@simtec.co.uk>
   5  *
   6  * S3C24XX CPU Frequency scaling
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation.
  11 */
  12
  13 #include <linux/init.h>
  14 #include <linux/module.h>
  15 #include <linux/interrupt.h>
  16 #include <linux/ioport.h>
  17 #include <linux/cpufreq.h>
  18 #include <linux/cpu.h>
  19 #include <linux/clk.h>
  20 #include <linux/err.h>
  21 #include <linux/io.h>
  22 #include <linux/device.h>
  23 #include <linux/sysfs.h>
  24 #include <linux/slab.h>
  25
  26 #include <asm/mach/arch.h>
  27 #include <asm/mach/map.h>
  28
  29 #include <plat/cpu.h>
  30 #include <plat/cpu-freq-core.h>
  31
  32 #include <mach/regs-clock.h>
  33
  34 /* note, cpufreq support deals in kHz, no Hz */
  35
  36 static struct cpufreq_driver s3c24xx_driver;
  37 static struct s3c_cpufreq_config cpu_cur;
  38 static struct s3c_iotimings s3c24xx_iotiming;
  39 static struct cpufreq_frequency_table *pll_reg;
  40 static unsigned int last_target = ~0;
  41 static unsigned int ftab_size;
  42 static struct cpufreq_frequency_table *ftab;
  43
  44 static struct clk *_clk_mpll;
  45 static struct clk *_clk_xtal;
  46 static struct clk *clk_fclk;
  47 static struct clk *clk_hclk;
  48 static struct clk *clk_pclk;
  49 static struct clk *clk_arm;
  50
  51 #ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS
  52 struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void)
  53 {
  54         return &cpu_cur;
  55 }
  56
  57 struct s3c_iotimings *s3c_cpufreq_getiotimings(void)
  58 {
  59         return &s3c24xx_iotiming;
  60 }
  61 #endif /* CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS */
  62
  63 static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg)
  64 {
  65         unsigned long fclk, pclk, hclk, armclk;
  66
  67         cfg->freq.fclk = fclk = clk_get_rate(clk_fclk);
  68         cfg->freq.hclk = hclk = clk_get_rate(clk_hclk);
  69         cfg->freq.pclk = pclk = clk_get_rate(clk_pclk);
  70         cfg->freq.armclk = armclk = clk_get_rate(clk_arm);
  71
  72         cfg->pll.driver_data = __raw_readl(S3C2410_MPLLCON);
  73         cfg->pll.frequency = fclk;
  74
  75         cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
  76
  77         cfg->divs.h_divisor = fclk / hclk;
  78         cfg->divs.p_divisor = fclk / pclk;
  79 }
  80
  81 static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg)
  82 {
  83         unsigned long pll = cfg->pll.frequency;
  84
  85         cfg->freq.fclk = pll;
  86         cfg->freq.hclk = pll / cfg->divs.h_divisor;
  87         cfg->freq.pclk = pll / cfg->divs.p_divisor;
  88
  89         /* convert hclk into 10ths of nanoseconds for io calcs */
  90         cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
  91 }
  92
  93 static inline int closer(unsigned int target, unsigned int n, unsigned int c)
  94 {
  95         int diff_cur = abs(target - c);
  96         int diff_new = abs(target - n);
  97
  98         return (diff_new < diff_cur);
  99 }
 100
 101 static void s3c_cpufreq_show(const char *pfx,
 102                                  struct s3c_cpufreq_config *cfg)
 103 {
 104         s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n",
 105                      pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk,
 106                      cfg->freq.hclk, cfg->divs.h_divisor,
 107                      cfg->freq.pclk, cfg->divs.p_divisor);
 108 }
 109
 110 /* functions to wrapper the driver info calls to do the cpu specific work */
 111
 112 static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg)
 113 {
 114         if (cfg->info->set_iotiming)
 115                 (cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming);
 116 }
 117
 118 static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg)
 119 {
 120         if (cfg->info->calc_iotiming)
 121                 return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming);
 122
 123         return 0;
 124 }
 125
 126 static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
 127 {
 128         (cfg->info->set_refresh)(cfg);
 129 }
 130
 131 static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
 132 {
 133         (cfg->info->set_divs)(cfg);
 134 }
 135
 136 static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
 137 {
 138         return (cfg->info->calc_divs)(cfg);
 139 }
 140
 141 static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg)
 142 {
 143         cfg->mpll = _clk_mpll;
 144         (cfg->info->set_fvco)(cfg);
 145 }
 146
 147 static inline void s3c_cpufreq_updateclk(struct clk *clk,
 148                                          unsigned int freq)
 149 {
 150         clk_set_rate(clk, freq);
 151 }
 152
 153 static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
 154                                  unsigned int target_freq,
 155                                  struct cpufreq_frequency_table *pll)
 156 {
 157         struct s3c_cpufreq_freqs freqs;
 158         struct s3c_cpufreq_config cpu_new;
 159         unsigned long flags;
 160
 161         cpu_new = cpu_cur;  /* copy new from current */
 162
 163         s3c_cpufreq_show("cur", &cpu_cur);
 164
 165         /* TODO - check for DMA currently outstanding */
 166
 167         cpu_new.pll = pll ? *pll : cpu_cur.pll;
 168
 169         if (pll)
 170                 freqs.pll_changing = 1;
 171
 172         /* update our frequencies */
 173
 174         cpu_new.freq.armclk = target_freq;
 175         cpu_new.freq.fclk = cpu_new.pll.frequency;
 176
 177         if (s3c_cpufreq_calcdivs(&cpu_new) < 0) {
 178                 printk(KERN_ERR "no divisors for %d\n", target_freq);
 179                 goto err_notpossible;
 180         }
 181
 182         s3c_freq_dbg("%s: got divs\n", __func__);
 183
 184         s3c_cpufreq_calc(&cpu_new);
 185
 186         s3c_freq_dbg("%s: calculated frequencies for new\n", __func__);
 187
 188         if (cpu_new.freq.hclk != cpu_cur.freq.hclk) {
 189                 if (s3c_cpufreq_calcio(&cpu_new) < 0) {
 190                         printk(KERN_ERR "%s: no IO timings\n", __func__);
 191                         goto err_notpossible;
 192                 }
 193         }
 194
 195         s3c_cpufreq_show("new", &cpu_new);
 196
 197         /* setup our cpufreq parameters */
 198
 199         freqs.old = cpu_cur.freq;
 200         freqs.new = cpu_new.freq;
 201
 202         freqs.freqs.old = cpu_cur.freq.armclk / 1000;
 203         freqs.freqs.new = cpu_new.freq.armclk / 1000;
 204
 205         /* update f/h/p clock settings before we issue the change
 206          * notification, so that drivers do not need to do anything
 207          * special if they want to recalculate on CPUFREQ_PRECHANGE. */
 208
 209         s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency);
 210         s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk);
 211         s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk);
 212         s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk);
 213
 214         /* start the frequency change */
 215         cpufreq_freq_transition_begin(policy, &freqs.freqs);
 216
 217         /* If hclk is staying the same, then we do not need to
 218          * re-write the IO or the refresh timings whilst we are changing
 219          * speed. */
 220
 221         local_irq_save(flags);
 222
 223         /* is our memory clock slowing down? */
 224         if (cpu_new.freq.hclk < cpu_cur.freq.hclk) {
 225                 s3c_cpufreq_setrefresh(&cpu_new);
 226                 s3c_cpufreq_setio(&cpu_new);
 227         }
 228
 229         if (cpu_new.freq.fclk == cpu_cur.freq.fclk) {
 230                 /* not changing PLL, just set the divisors */
 231
 232                 s3c_cpufreq_setdivs(&cpu_new);
 233         } else {
 234                 if (cpu_new.freq.fclk < cpu_cur.freq.fclk) {
 235                         /* slow the cpu down, then set divisors */
 236
 237                         s3c_cpufreq_setfvco(&cpu_new);
 238                         s3c_cpufreq_setdivs(&cpu_new);
 239                 } else {
 240                         /* set the divisors, then speed up */
 241
 242                         s3c_cpufreq_setdivs(&cpu_new);
 243                         s3c_cpufreq_setfvco(&cpu_new);
 244                 }
 245         }
 246
 247         /* did our memory clock speed up */
 248         if (cpu_new.freq.hclk > cpu_cur.freq.hclk) {
 249                 s3c_cpufreq_setrefresh(&cpu_new);
 250                 s3c_cpufreq_setio(&cpu_new);
 251         }
 252
 253         /* update our current settings */
 254         cpu_cur = cpu_new;
 255
 256         local_irq_restore(flags);
 257
 258         /* notify everyone we've done this */
 259         cpufreq_freq_transition_end(policy, &freqs.freqs, 0);
 260
 261         s3c_freq_dbg("%s: finished\n", __func__);
 262         return 0;
 263
 264  err_notpossible:
 265         printk(KERN_ERR "no compatible settings for %d\n", target_freq);
 266         return -EINVAL;
 267 }
 268
 269 /* s3c_cpufreq_target
 270  *
 271  * called by the cpufreq core to adjust the frequency that the CPU
 272  * is currently running at.
 273  */
 274
 275 static int s3c_cpufreq_target(struct cpufreq_policy *policy,
 276                               unsigned int target_freq,
 277                               unsigned int relation)
 278 {
 279         struct cpufreq_frequency_table *pll;
 280         unsigned int index;
 281
 282         /* avoid repeated calls which cause a needless amout of duplicated
 283          * logging output (and CPU time as the calculation process is
 284          * done) */
 285         if (target_freq == last_target)
 286                 return 0;
 287
 288         last_target = target_freq;
 289
 290         s3c_freq_dbg("%s: policy %p, target %u, relation %u\n",
 291                      __func__, policy, target_freq, relation);
 292
 293         if (ftab) {
 294                 if (cpufreq_frequency_table_target(policy, ftab,
 295                                                    target_freq, relation,
 296                                                    &index)) {
 297                         s3c_freq_dbg("%s: table failed\n", __func__);
 298                         return -EINVAL;
 299                 }
 300
 301                 s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__,
 302                              target_freq, index, ftab[index].frequency);
 303                 target_freq = ftab[index].frequency;
 304         }
 305
 306         target_freq *= 1000;  /* convert target to Hz */
 307
 308         /* find the settings for our new frequency */
 309
 310         if (!pll_reg || cpu_cur.lock_pll) {
 311                 /* either we've not got any PLL values, or we've locked
 312                  * to the current one. */
 313                 pll = NULL;
 314         } else {
 315                 struct cpufreq_policy tmp_policy;
 316                 int ret;
 317
 318                 /* we keep the cpu pll table in Hz, to ensure we get an
 319                  * accurate value for the PLL output. */
 320
 321                 tmp_policy.min = policy->min * 1000;
 322                 tmp_policy.max = policy->max * 1000;
 323                 tmp_policy.cpu = policy->cpu;
 324
 325                 /* cpufreq_frequency_table_target uses a pointer to 'index'
 326                  * which is the number of the table entry, not the value of
 327                  * the table entry's index field. */
 328
 329                 ret = cpufreq_frequency_table_target(&tmp_policy, pll_reg,
 330                                                      target_freq, relation,
 331                                                      &index);
 332
 333                 if (ret < 0) {
 334                         printk(KERN_ERR "%s: no PLL available\n", __func__);
 335                         goto err_notpossible;
 336                 }
 337
 338                 pll = pll_reg + index;
 339
 340                 s3c_freq_dbg("%s: target %u => %u\n",
 341                              __func__, target_freq, pll->frequency);
 342
 343                 target_freq = pll->frequency;
 344         }
 345
 346         return s3c_cpufreq_settarget(policy, target_freq, pll);
 347
 348  err_notpossible:
 349         printk(KERN_ERR "no compatible settings for %d\n", target_freq);
 350         return -EINVAL;
 351 }
 352
 353 struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name)
 354 {
 355         struct clk *clk;
 356
 357         clk = clk_get(dev, name);
 358         if (IS_ERR(clk))
 359                 printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name);
 360
 361         return clk;
 362 }
 363
 364 static int s3c_cpufreq_init(struct cpufreq_policy *policy)
 365 {
 366         policy->clk = clk_arm;
 367         return cpufreq_generic_init(policy, ftab, cpu_cur.info->latency);
 368 }
 369
 370 static int __init s3c_cpufreq_initclks(void)
 371 {
 372         _clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll");
 373         _clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal");
 374         clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk");
 375         clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk");
 376         clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk");
 377         clk_arm = s3c_cpufreq_clk_get(NULL, "armclk");
 378
 379         if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) ||
 380             IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) {
 381                 printk(KERN_ERR "%s: could not get clock(s)\n", __func__);
 382                 return -ENOENT;
 383         }
 384
 385         printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__,
 386                clk_get_rate(clk_fclk) / 1000,
 387                clk_get_rate(clk_hclk) / 1000,
 388                clk_get_rate(clk_pclk) / 1000,
 389                clk_get_rate(clk_arm) / 1000);
 390
 391         return 0;
 392 }
 393
 394 #ifdef CONFIG_PM
 395 static struct cpufreq_frequency_table suspend_pll;
 396 static unsigned int suspend_freq;
 397
 398 static int s3c_cpufreq_suspend(struct cpufreq_policy *policy)
 399 {
 400         suspend_pll.frequency = clk_get_rate(_clk_mpll);
 401         suspend_pll.driver_data = __raw_readl(S3C2410_MPLLCON);
 402         suspend_freq = clk_get_rate(clk_arm);
 403
 404         return 0;
 405 }
 406
 407 static int s3c_cpufreq_resume(struct cpufreq_policy *policy)
 408 {
 409         int ret;
 410
 411         s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy);
 412
 413         last_target = ~0;       /* invalidate last_target setting */
 414
 415         /* whilst we will be called later on, we try and re-set the
 416          * cpu frequencies as soon as possible so that we do not end
 417          * up resuming devices and then immediately having to re-set
 418          * a number of settings once these devices have restarted.
 419          *
 420          * as a note, it is expected devices are not used until they
 421          * have been un-suspended and at that time they should have
 422          * used the updated clock settings.
 423          */
 424
 425         ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll);
 426         if (ret) {
 427                 printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__);
 428                 return ret;
 429         }
 430
 431         return 0;
 432 }
 433 #else
 434 #define s3c_cpufreq_resume NULL
 435 #define s3c_cpufreq_suspend NULL
 436 #endif
 437
 438 static struct cpufreq_driver s3c24xx_driver = {
 439         .flags          = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
 440         .target         = s3c_cpufreq_target,
 441         .get            = cpufreq_generic_get,
 442         .init           = s3c_cpufreq_init,
 443         .suspend        = s3c_cpufreq_suspend,
 444         .resume         = s3c_cpufreq_resume,
 445         .name           = "s3c24xx",
 446 };
 447
 448
 449 int s3c_cpufreq_register(struct s3c_cpufreq_info *info)
 450 {
 451         if (!info || !info->name) {
 452                 printk(KERN_ERR "%s: failed to pass valid information\n",
 453                        __func__);
 454                 return -EINVAL;
 455         }
 456
 457         printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n",
 458                info->name);
 459
 460         /* check our driver info has valid data */
 461
 462         BUG_ON(info->set_refresh == NULL);
 463         BUG_ON(info->set_divs == NULL);
 464         BUG_ON(info->calc_divs == NULL);
 465
 466         /* info->set_fvco is optional, depending on whether there
 467          * is a need to set the clock code. */
 468
 469         cpu_cur.info = info;
 470
 471         /* Note, driver registering should probably update locktime */
 472
 473         return 0;
 474 }
 475
 476 int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
 477 {
 478         struct s3c_cpufreq_board *ours;
 479
 480         if (!board) {
 481                 printk(KERN_INFO "%s: no board data\n", __func__);
 482                 return -EINVAL;
 483         }
 484
 485         /* Copy the board information so that each board can make this
 486          * initdata. */
 487
 488         ours = kzalloc(sizeof(*ours), GFP_KERNEL);
 489         if (ours == NULL) {
 490                 printk(KERN_ERR "%s: no memory\n", __func__);
 491                 return -ENOMEM;
 492         }
 493
 494         *ours = *board;
 495         cpu_cur.board = ours;
 496
 497         return 0;
 498 }
 499
 500 static int __init s3c_cpufreq_auto_io(void)
 501 {
 502         int ret;
 503
 504         if (!cpu_cur.info->get_iotiming) {
 505                 printk(KERN_ERR "%s: get_iotiming undefined\n", __func__);
 506                 return -ENOENT;
 507         }
 508
 509         printk(KERN_INFO "%s: working out IO settings\n", __func__);
 510
 511         ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming);
 512         if (ret)
 513                 printk(KERN_ERR "%s: failed to get timings\n", __func__);
 514
 515         return ret;
 516 }
 517
 518 /* if one or is zero, then return the other, otherwise return the min */
 519 #define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b))
 520
 521 /**
 522  * s3c_cpufreq_freq_min - find the minimum settings for the given freq.
 523  * @dst: The destination structure
 524  * @a: One argument.
 525  * @b: The other argument.
 526  *
 527  * Create a minimum of each frequency entry in the 'struct s3c_freq',
 528  * unless the entry is zero when it is ignored and the non-zero argument
 529  * used.
 530  */
 531 static void s3c_cpufreq_freq_min(struct s3c_freq *dst,
 532                                  struct s3c_freq *a, struct s3c_freq *b)
 533 {
 534         dst->fclk = do_min(a->fclk, b->fclk);
 535         dst->hclk = do_min(a->hclk, b->hclk);
 536         dst->pclk = do_min(a->pclk, b->pclk);
 537         dst->armclk = do_min(a->armclk, b->armclk);
 538 }
 539
 540 static inline u32 calc_locktime(u32 freq, u32 time_us)
 541 {
 542         u32 result;
 543
 544         result = freq * time_us;
 545         result = DIV_ROUND_UP(result, 1000 * 1000);
 546
 547         return result;
 548 }
 549
 550 static void s3c_cpufreq_update_loctkime(void)
 551 {
 552         unsigned int bits = cpu_cur.info->locktime_bits;
 553         u32 rate = (u32)clk_get_rate(_clk_xtal);
 554         u32 val;
 555
 556         if (bits == 0) {
 557                 WARN_ON(1);
 558                 return;
 559         }
 560
 561         val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits;
 562         val |= calc_locktime(rate, cpu_cur.info->locktime_m);
 563
 564         printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val);
 565         __raw_writel(val, S3C2410_LOCKTIME);
 566 }
 567
 568 static int s3c_cpufreq_build_freq(void)
 569 {
 570         int size, ret;
 571
 572         if (!cpu_cur.info->calc_freqtable)
 573                 return -EINVAL;
 574
 575         kfree(ftab);
 576         ftab = NULL;
 577
 578         size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0);
 579         size++;
 580
 581         ftab = kzalloc(sizeof(*ftab) * size, GFP_KERNEL);
 582         if (!ftab) {
 583                 printk(KERN_ERR "%s: no memory for tables\n", __func__);
 584                 return -ENOMEM;
 585         }
 586
 587         ftab_size = size;
 588
 589         ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size);
 590         s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END);
 591
 592         return 0;
 593 }
 594
 595 static int __init s3c_cpufreq_initcall(void)
 596 {
 597         int ret = 0;
 598
 599         if (cpu_cur.info && cpu_cur.board) {
 600                 ret = s3c_cpufreq_initclks();
 601                 if (ret)
 602                         goto out;
 603
 604                 /* get current settings */
 605                 s3c_cpufreq_getcur(&cpu_cur);
 606                 s3c_cpufreq_show("cur", &cpu_cur);
 607
 608                 if (cpu_cur.board->auto_io) {
 609                         ret = s3c_cpufreq_auto_io();
 610                         if (ret) {
 611                                 printk(KERN_ERR "%s: failed to get io timing\n",
 612                                        __func__);
 613                                 goto out;
 614                         }
 615                 }
 616
 617                 if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) {
 618                         printk(KERN_ERR "%s: no IO support registered\n",
 619                                __func__);
 620                         ret = -EINVAL;
 621                         goto out;
 622                 }
 623
 624                 if (!cpu_cur.info->need_pll)
 625                         cpu_cur.lock_pll = 1;
 626
 627                 s3c_cpufreq_update_loctkime();
 628
 629                 s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max,
 630                                      &cpu_cur.info->max);
 631
 632                 if (cpu_cur.info->calc_freqtable)
 633                         s3c_cpufreq_build_freq();
 634
 635                 ret = cpufreq_register_driver(&s3c24xx_driver);
 636         }
 637
 638  out:
 639         return ret;
 640 }
 641
 642 late_initcall(s3c_cpufreq_initcall);
 643
 644 /**
 645  * s3c_plltab_register - register CPU PLL table.
 646  * @plls: The list of PLL entries.
 647  * @plls_no: The size of the PLL entries @plls.
 648  *
 649  * Register the given set of PLLs with the system.
 650  */
 651 int __init s3c_plltab_register(struct cpufreq_frequency_table *plls,
 652                                unsigned int plls_no)
 653 {
 654         struct cpufreq_frequency_table *vals;
 655         unsigned int size;
 656
 657         size = sizeof(*vals) * (plls_no + 1);
 658
 659         vals = kzalloc(size, GFP_KERNEL);
 660         if (vals) {
 661                 memcpy(vals, plls, size);
 662                 pll_reg = vals;
 663
 664                 /* write a terminating entry, we don't store it in the
 665                  * table that is stored in the kernel */
 666                 vals += plls_no;
 667                 vals->frequency = CPUFREQ_TABLE_END;
 668
 669                 printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no);
 670         } else
 671                 printk(KERN_ERR "cpufreq: no memory for PLL tables\n");
 672
 673         return vals ? 0 : -ENOMEM;
 674 }