Linux 4.2.1
[linux/fpc-iii.git] / drivers / cpuidle / cpuidle-arm.c
blob545069d5fdfba3e7ab07f0ec296404c64ad2a977
1 /*
2 * ARM/ARM64 generic CPU idle driver.
4 * Copyright (C) 2014 ARM Ltd.
5 * Author: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
12 #define pr_fmt(fmt) "CPUidle arm: " fmt
14 #include <linux/cpuidle.h>
15 #include <linux/cpumask.h>
16 #include <linux/cpu_pm.h>
17 #include <linux/kernel.h>
18 #include <linux/module.h>
19 #include <linux/of.h>
20 #include <linux/slab.h>
22 #include <asm/cpuidle.h>
24 #include "dt_idle_states.h"
27 * arm_enter_idle_state - Programs CPU to enter the specified state
29 * dev: cpuidle device
30 * drv: cpuidle driver
31 * idx: state index
33 * Called from the CPUidle framework to program the device to the
34 * specified target state selected by the governor.
36 static int arm_enter_idle_state(struct cpuidle_device *dev,
37 struct cpuidle_driver *drv, int idx)
39 int ret;
41 if (!idx) {
42 cpu_do_idle();
43 return idx;
46 ret = cpu_pm_enter();
47 if (!ret) {
49 * Pass idle state index to cpu_suspend which in turn will
50 * call the CPU ops suspend protocol with idle index as a
51 * parameter.
53 arm_cpuidle_suspend(idx);
55 cpu_pm_exit();
58 return ret ? -1 : idx;
61 static struct cpuidle_driver arm_idle_driver = {
62 .name = "arm_idle",
63 .owner = THIS_MODULE,
65 * State at index 0 is standby wfi and considered standard
66 * on all ARM platforms. If in some platforms simple wfi
67 * can't be used as "state 0", DT bindings must be implemented
68 * to work around this issue and allow installing a special
69 * handler for idle state index 0.
71 .states[0] = {
72 .enter = arm_enter_idle_state,
73 .exit_latency = 1,
74 .target_residency = 1,
75 .power_usage = UINT_MAX,
76 .name = "WFI",
77 .desc = "ARM WFI",
81 static const struct of_device_id arm_idle_state_match[] __initconst = {
82 { .compatible = "arm,idle-state",
83 .data = arm_enter_idle_state },
84 { },
88 * arm_idle_init
90 * Registers the arm specific cpuidle driver with the cpuidle
91 * framework. It relies on core code to parse the idle states
92 * and initialize them using driver data structures accordingly.
94 static int __init arm_idle_init(void)
96 int cpu, ret;
97 struct cpuidle_driver *drv = &arm_idle_driver;
98 struct cpuidle_device *dev;
101 * Initialize idle states data, starting at index 1.
102 * This driver is DT only, if no DT idle states are detected (ret == 0)
103 * let the driver initialization fail accordingly since there is no
104 * reason to initialize the idle driver if only wfi is supported.
106 ret = dt_init_idle_driver(drv, arm_idle_state_match, 1);
107 if (ret <= 0)
108 return ret ? : -ENODEV;
110 ret = cpuidle_register_driver(drv);
111 if (ret) {
112 pr_err("Failed to register cpuidle driver\n");
113 return ret;
117 * Call arch CPU operations in order to initialize
118 * idle states suspend back-end specific data
120 for_each_possible_cpu(cpu) {
121 ret = arm_cpuidle_init(cpu);
124 * Skip the cpuidle device initialization if the reported
125 * failure is a HW misconfiguration/breakage (-ENXIO).
127 if (ret == -ENXIO)
128 continue;
130 if (ret) {
131 pr_err("CPU %d failed to init idle CPU ops\n", cpu);
132 goto out_fail;
135 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
136 if (!dev) {
137 pr_err("Failed to allocate cpuidle device\n");
138 goto out_fail;
140 dev->cpu = cpu;
142 ret = cpuidle_register_device(dev);
143 if (ret) {
144 pr_err("Failed to register cpuidle device for CPU %d\n",
145 cpu);
146 kfree(dev);
147 goto out_fail;
151 return 0;
152 out_fail:
153 while (--cpu >= 0) {
154 dev = per_cpu(cpuidle_devices, cpu);
155 cpuidle_unregister_device(dev);
156 kfree(dev);
159 cpuidle_unregister_driver(drv);
161 return ret;
163 device_initcall(arm_idle_init);