drivers/gpio/gpio-xtensa.c

   1 /*
   2  * Copyright (C) 2013 TangoTec Ltd.
   3  * Author: Baruch Siach <baruch@tkos.co.il>
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License version 2 as
   7  * published by the Free Software Foundation.
   8  *
   9  * Driver for the Xtensa LX4 GPIO32 Option
  10  *
  11  * Documentation: Xtensa LX4 Microprocessor Data Book, Section 2.22
  12  *
  13  * GPIO32 is a standard optional extension to the Xtensa architecture core that
  14  * provides preconfigured output and input ports for intra SoC signaling. The
  15  * GPIO32 option is implemented as 32bit Tensilica Instruction Extension (TIE)
  16  * output state called EXPSTATE, and 32bit input wire called IMPWIRE. This
  17  * driver treats input and output states as two distinct devices.
  18  *
  19  * Access to GPIO32 specific instructions is controlled by the CPENABLE
  20  * (Coprocessor Enable Bits) register. By default Xtensa Linux startup code
  21  * disables access to all coprocessors. This driver sets the CPENABLE bit
  22  * corresponding to GPIO32 before any GPIO32 specific instruction, and restores
  23  * CPENABLE state after that.
  24  *
  25  * This driver is currently incompatible with SMP. The GPIO32 extension is not
  26  * guaranteed to be available in all cores. Moreover, each core controls a
  27  * different set of IO wires. A theoretical SMP aware version of this driver
  28  * would need to have a per core workqueue to do the actual GPIO manipulation.
  29  */
  30
  31 #include <linux/err.h>
  32 #include <linux/module.h>
  33 #include <linux/gpio.h>
  34 #include <linux/bitops.h>
  35 #include <linux/platform_device.h>
  36
  37 #include <asm/coprocessor.h> /* CPENABLE read/write macros */
  38
  39 #ifndef XCHAL_CP_ID_XTIOP
  40 #error GPIO32 option is not enabled for your xtensa core variant
  41 #endif
  42
  43 #if XCHAL_HAVE_CP
  44
  45 static inline unsigned long enable_cp(unsigned long *cpenable)
  46 {
  47         unsigned long flags;
  48
  49         local_irq_save(flags);
  50         RSR_CPENABLE(*cpenable);
  51         WSR_CPENABLE(*cpenable | BIT(XCHAL_CP_ID_XTIOP));
  52
  53         return flags;
  54 }
  55
  56 static inline void disable_cp(unsigned long flags, unsigned long cpenable)
  57 {
  58         WSR_CPENABLE(cpenable);
  59         local_irq_restore(flags);
  60 }
  61
  62 #else
  63
  64 static inline unsigned long enable_cp(unsigned long *cpenable)
  65 {
  66         *cpenable = 0; /* avoid uninitialized value warning */
  67         return 0;
  68 }
  69
  70 static inline void disable_cp(unsigned long flags, unsigned long cpenable)
  71 {
  72 }
  73
  74 #endif /* XCHAL_HAVE_CP */
  75
  76 static int xtensa_impwire_get_direction(struct gpio_chip *gc, unsigned offset)
  77 {
  78         return 1; /* input only */
  79 }
  80
  81 static int xtensa_impwire_get_value(struct gpio_chip *gc, unsigned offset)
  82 {
  83         unsigned long flags, saved_cpenable;
  84         u32 impwire;
  85
  86         flags = enable_cp(&saved_cpenable);
  87         __asm__ __volatile__("read_impwire %0" : "=a" (impwire));
  88         disable_cp(flags, saved_cpenable);
  89
  90         return !!(impwire & BIT(offset));
  91 }
  92
  93 static void xtensa_impwire_set_value(struct gpio_chip *gc, unsigned offset,
  94                                     int value)
  95 {
  96         BUG(); /* output only; should never be called */
  97 }
  98
  99 static int xtensa_expstate_get_direction(struct gpio_chip *gc, unsigned offset)
 100 {
 101         return 0; /* output only */
 102 }
 103
 104 static int xtensa_expstate_get_value(struct gpio_chip *gc, unsigned offset)
 105 {
 106         unsigned long flags, saved_cpenable;
 107         u32 expstate;
 108
 109         flags = enable_cp(&saved_cpenable);
 110         __asm__ __volatile__("rur.expstate %0" : "=a" (expstate));
 111         disable_cp(flags, saved_cpenable);
 112
 113         return !!(expstate & BIT(offset));
 114 }
 115
 116 static void xtensa_expstate_set_value(struct gpio_chip *gc, unsigned offset,
 117                                      int value)
 118 {
 119         unsigned long flags, saved_cpenable;
 120         u32 mask = BIT(offset);
 121         u32 val = value ? BIT(offset) : 0;
 122
 123         flags = enable_cp(&saved_cpenable);
 124         __asm__ __volatile__("wrmsk_expstate %0, %1"
 125                              :: "a" (val), "a" (mask));
 126         disable_cp(flags, saved_cpenable);
 127 }
 128
 129 static struct gpio_chip impwire_chip = {
 130         .label          = "impwire",
 131         .base           = -1,
 132         .ngpio          = 32,
 133         .get_direction  = xtensa_impwire_get_direction,
 134         .get            = xtensa_impwire_get_value,
 135         .set            = xtensa_impwire_set_value,
 136 };
 137
 138 static struct gpio_chip expstate_chip = {
 139         .label          = "expstate",
 140         .base           = -1,
 141         .ngpio          = 32,
 142         .get_direction  = xtensa_expstate_get_direction,
 143         .get            = xtensa_expstate_get_value,
 144         .set            = xtensa_expstate_set_value,
 145 };
 146
 147 static int xtensa_gpio_probe(struct platform_device *pdev)
 148 {
 149         int ret;
 150
 151         ret = gpiochip_add(&impwire_chip);
 152         if (ret)
 153                 return ret;
 154         return gpiochip_add(&expstate_chip);
 155 }
 156
 157 static struct platform_driver xtensa_gpio_driver = {
 158         .driver         = {
 159                 .name           = "xtensa-gpio",
 160         },
 161         .probe          = xtensa_gpio_probe,
 162 };
 163
 164 static int __init xtensa_gpio_init(void)
 165 {
 166         struct platform_device *pdev;
 167
 168         pdev = platform_device_register_simple("xtensa-gpio", 0, NULL, 0);
 169         if (IS_ERR(pdev))
 170                 return PTR_ERR(pdev);
 171
 172         return platform_driver_register(&xtensa_gpio_driver);
 173 }
 174 device_initcall(xtensa_gpio_init);
 175
 176 MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
 177 MODULE_DESCRIPTION("Xtensa LX4 GPIO32 driver");
 178 MODULE_LICENSE("GPL");