Linux 4.2.1
[linux/fpc-iii.git] / drivers / spi / spi-falcon.c
blob286b2c81fc6bb0d7500568df47753b47094da8a2
1 /*
2 * This program is free software; you can redistribute it and/or modify it
3 * under the terms of the GNU General Public License version 2 as published
4 * by the Free Software Foundation.
6 * Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com>
7 */
9 #include <linux/module.h>
10 #include <linux/device.h>
11 #include <linux/platform_device.h>
12 #include <linux/spi/spi.h>
13 #include <linux/delay.h>
14 #include <linux/of.h>
15 #include <linux/of_platform.h>
17 #include <lantiq_soc.h>
19 #define DRV_NAME "sflash-falcon"
21 #define FALCON_SPI_XFER_BEGIN (1 << 0)
22 #define FALCON_SPI_XFER_END (1 << 1)
24 /* Bus Read Configuration Register0 */
25 #define BUSRCON0 0x00000010
26 /* Bus Write Configuration Register0 */
27 #define BUSWCON0 0x00000018
28 /* Serial Flash Configuration Register */
29 #define SFCON 0x00000080
30 /* Serial Flash Time Register */
31 #define SFTIME 0x00000084
32 /* Serial Flash Status Register */
33 #define SFSTAT 0x00000088
34 /* Serial Flash Command Register */
35 #define SFCMD 0x0000008C
36 /* Serial Flash Address Register */
37 #define SFADDR 0x00000090
38 /* Serial Flash Data Register */
39 #define SFDATA 0x00000094
40 /* Serial Flash I/O Control Register */
41 #define SFIO 0x00000098
42 /* EBU Clock Control Register */
43 #define EBUCC 0x000000C4
45 /* Dummy Phase Length */
46 #define SFCMD_DUMLEN_OFFSET 16
47 #define SFCMD_DUMLEN_MASK 0x000F0000
48 /* Chip Select */
49 #define SFCMD_CS_OFFSET 24
50 #define SFCMD_CS_MASK 0x07000000
51 /* field offset */
52 #define SFCMD_ALEN_OFFSET 20
53 #define SFCMD_ALEN_MASK 0x00700000
54 /* SCK Rise-edge Position */
55 #define SFTIME_SCKR_POS_OFFSET 8
56 #define SFTIME_SCKR_POS_MASK 0x00000F00
57 /* SCK Period */
58 #define SFTIME_SCK_PER_OFFSET 0
59 #define SFTIME_SCK_PER_MASK 0x0000000F
60 /* SCK Fall-edge Position */
61 #define SFTIME_SCKF_POS_OFFSET 12
62 #define SFTIME_SCKF_POS_MASK 0x0000F000
63 /* Device Size */
64 #define SFCON_DEV_SIZE_A23_0 0x03000000
65 #define SFCON_DEV_SIZE_MASK 0x0F000000
66 /* Read Data Position */
67 #define SFTIME_RD_POS_MASK 0x000F0000
68 /* Data Output */
69 #define SFIO_UNUSED_WD_MASK 0x0000000F
70 /* Command Opcode mask */
71 #define SFCMD_OPC_MASK 0x000000FF
72 /* dlen bytes of data to write */
73 #define SFCMD_DIR_WRITE 0x00000100
74 /* Data Length offset */
75 #define SFCMD_DLEN_OFFSET 9
76 /* Command Error */
77 #define SFSTAT_CMD_ERR 0x20000000
78 /* Access Command Pending */
79 #define SFSTAT_CMD_PEND 0x00400000
80 /* Frequency set to 100MHz. */
81 #define EBUCC_EBUDIV_SELF100 0x00000001
82 /* Serial Flash */
83 #define BUSRCON0_AGEN_SERIAL_FLASH 0xF0000000
84 /* 8-bit multiplexed */
85 #define BUSRCON0_PORTW_8_BIT_MUX 0x00000000
86 /* Serial Flash */
87 #define BUSWCON0_AGEN_SERIAL_FLASH 0xF0000000
88 /* Chip Select after opcode */
89 #define SFCMD_KEEP_CS_KEEP_SELECTED 0x00008000
91 #define CLOCK_100M 100000000
92 #define CLOCK_50M 50000000
94 struct falcon_sflash {
95 u32 sfcmd; /* for caching of opcode, direction, ... */
96 struct spi_master *master;
99 int falcon_sflash_xfer(struct spi_device *spi, struct spi_transfer *t,
100 unsigned long flags)
102 struct device *dev = &spi->dev;
103 struct falcon_sflash *priv = spi_master_get_devdata(spi->master);
104 const u8 *txp = t->tx_buf;
105 u8 *rxp = t->rx_buf;
106 unsigned int bytelen = ((8 * t->len + 7) / 8);
107 unsigned int len, alen, dumlen;
108 u32 val;
109 enum {
110 state_init,
111 state_command_prepare,
112 state_write,
113 state_read,
114 state_disable_cs,
115 state_end
116 } state = state_init;
118 do {
119 switch (state) {
120 case state_init: /* detect phase of upper layer sequence */
122 /* initial write ? */
123 if (flags & FALCON_SPI_XFER_BEGIN) {
124 if (!txp) {
125 dev_err(dev,
126 "BEGIN without tx data!\n");
127 return -ENODATA;
130 * Prepare the parts of the sfcmd register,
131 * which should not change during a sequence!
132 * Only exception are the length fields,
133 * especially alen and dumlen.
136 priv->sfcmd = ((spi->chip_select
137 << SFCMD_CS_OFFSET)
138 & SFCMD_CS_MASK);
139 priv->sfcmd |= SFCMD_KEEP_CS_KEEP_SELECTED;
140 priv->sfcmd |= *txp;
141 txp++;
142 bytelen--;
143 if (bytelen) {
145 * more data:
146 * maybe address and/or dummy
148 state = state_command_prepare;
149 break;
150 } else {
151 dev_dbg(dev, "write cmd %02X\n",
152 priv->sfcmd & SFCMD_OPC_MASK);
155 /* continued write ? */
156 if (txp && bytelen) {
157 state = state_write;
158 break;
160 /* read data? */
161 if (rxp && bytelen) {
162 state = state_read;
163 break;
165 /* end of sequence? */
166 if (flags & FALCON_SPI_XFER_END)
167 state = state_disable_cs;
168 else
169 state = state_end;
170 break;
172 /* collect tx data for address and dummy phase */
173 case state_command_prepare:
175 /* txp is valid, already checked */
176 val = 0;
177 alen = 0;
178 dumlen = 0;
179 while (bytelen > 0) {
180 if (alen < 3) {
181 val = (val << 8) | (*txp++);
182 alen++;
183 } else if ((dumlen < 15) && (*txp == 0)) {
185 * assume dummy bytes are set to 0
186 * from upper layer
188 dumlen++;
189 txp++;
190 } else {
191 break;
193 bytelen--;
195 priv->sfcmd &= ~(SFCMD_ALEN_MASK | SFCMD_DUMLEN_MASK);
196 priv->sfcmd |= (alen << SFCMD_ALEN_OFFSET) |
197 (dumlen << SFCMD_DUMLEN_OFFSET);
198 if (alen > 0)
199 ltq_ebu_w32(val, SFADDR);
201 dev_dbg(dev, "wr %02X, alen=%d (addr=%06X) dlen=%d\n",
202 priv->sfcmd & SFCMD_OPC_MASK,
203 alen, val, dumlen);
205 if (bytelen > 0) {
206 /* continue with write */
207 state = state_write;
208 } else if (flags & FALCON_SPI_XFER_END) {
209 /* end of sequence? */
210 state = state_disable_cs;
211 } else {
213 * go to end and expect another
214 * call (read or write)
216 state = state_end;
218 break;
220 case state_write:
222 /* txp still valid */
223 priv->sfcmd |= SFCMD_DIR_WRITE;
224 len = 0;
225 val = 0;
226 do {
227 if (bytelen--)
228 val |= (*txp++) << (8 * len++);
229 if ((flags & FALCON_SPI_XFER_END)
230 && (bytelen == 0)) {
231 priv->sfcmd &=
232 ~SFCMD_KEEP_CS_KEEP_SELECTED;
234 if ((len == 4) || (bytelen == 0)) {
235 ltq_ebu_w32(val, SFDATA);
236 ltq_ebu_w32(priv->sfcmd
237 | (len<<SFCMD_DLEN_OFFSET),
238 SFCMD);
239 len = 0;
240 val = 0;
241 priv->sfcmd &= ~(SFCMD_ALEN_MASK
242 | SFCMD_DUMLEN_MASK);
244 } while (bytelen);
245 state = state_end;
246 break;
248 case state_read:
250 /* read data */
251 priv->sfcmd &= ~SFCMD_DIR_WRITE;
252 do {
253 if ((flags & FALCON_SPI_XFER_END)
254 && (bytelen <= 4)) {
255 priv->sfcmd &=
256 ~SFCMD_KEEP_CS_KEEP_SELECTED;
258 len = (bytelen > 4) ? 4 : bytelen;
259 bytelen -= len;
260 ltq_ebu_w32(priv->sfcmd
261 | (len << SFCMD_DLEN_OFFSET), SFCMD);
262 priv->sfcmd &= ~(SFCMD_ALEN_MASK
263 | SFCMD_DUMLEN_MASK);
264 do {
265 val = ltq_ebu_r32(SFSTAT);
266 if (val & SFSTAT_CMD_ERR) {
267 /* reset error status */
268 dev_err(dev, "SFSTAT: CMD_ERR");
269 dev_err(dev, " (%x)\n", val);
270 ltq_ebu_w32(SFSTAT_CMD_ERR,
271 SFSTAT);
272 return -EBADE;
274 } while (val & SFSTAT_CMD_PEND);
275 val = ltq_ebu_r32(SFDATA);
276 do {
277 *rxp = (val & 0xFF);
278 rxp++;
279 val >>= 8;
280 len--;
281 } while (len);
282 } while (bytelen);
283 state = state_end;
284 break;
286 case state_disable_cs:
288 priv->sfcmd &= ~SFCMD_KEEP_CS_KEEP_SELECTED;
289 ltq_ebu_w32(priv->sfcmd | (0 << SFCMD_DLEN_OFFSET),
290 SFCMD);
291 val = ltq_ebu_r32(SFSTAT);
292 if (val & SFSTAT_CMD_ERR) {
293 /* reset error status */
294 dev_err(dev, "SFSTAT: CMD_ERR (%x)\n", val);
295 ltq_ebu_w32(SFSTAT_CMD_ERR, SFSTAT);
296 return -EBADE;
298 state = state_end;
299 break;
301 case state_end:
302 break;
304 } while (state != state_end);
306 return 0;
309 static int falcon_sflash_setup(struct spi_device *spi)
311 unsigned int i;
312 unsigned long flags;
314 spin_lock_irqsave(&ebu_lock, flags);
316 if (spi->max_speed_hz >= CLOCK_100M) {
317 /* set EBU clock to 100 MHz */
318 ltq_sys1_w32_mask(0, EBUCC_EBUDIV_SELF100, EBUCC);
319 i = 1; /* divider */
320 } else {
321 /* set EBU clock to 50 MHz */
322 ltq_sys1_w32_mask(EBUCC_EBUDIV_SELF100, 0, EBUCC);
324 /* search for suitable divider */
325 for (i = 1; i < 7; i++) {
326 if (CLOCK_50M / i <= spi->max_speed_hz)
327 break;
331 /* setup period of serial clock */
332 ltq_ebu_w32_mask(SFTIME_SCKF_POS_MASK
333 | SFTIME_SCKR_POS_MASK
334 | SFTIME_SCK_PER_MASK,
335 (i << SFTIME_SCKR_POS_OFFSET)
336 | (i << (SFTIME_SCK_PER_OFFSET + 1)),
337 SFTIME);
340 * set some bits of unused_wd, to not trigger HOLD/WP
341 * signals on non QUAD flashes
343 ltq_ebu_w32((SFIO_UNUSED_WD_MASK & (0x8 | 0x4)), SFIO);
345 ltq_ebu_w32(BUSRCON0_AGEN_SERIAL_FLASH | BUSRCON0_PORTW_8_BIT_MUX,
346 BUSRCON0);
347 ltq_ebu_w32(BUSWCON0_AGEN_SERIAL_FLASH, BUSWCON0);
348 /* set address wrap around to maximum for 24-bit addresses */
349 ltq_ebu_w32_mask(SFCON_DEV_SIZE_MASK, SFCON_DEV_SIZE_A23_0, SFCON);
351 spin_unlock_irqrestore(&ebu_lock, flags);
353 return 0;
356 static int falcon_sflash_xfer_one(struct spi_master *master,
357 struct spi_message *m)
359 struct falcon_sflash *priv = spi_master_get_devdata(master);
360 struct spi_transfer *t;
361 unsigned long spi_flags;
362 unsigned long flags;
363 int ret = 0;
365 priv->sfcmd = 0;
366 m->actual_length = 0;
368 spi_flags = FALCON_SPI_XFER_BEGIN;
369 list_for_each_entry(t, &m->transfers, transfer_list) {
370 if (list_is_last(&t->transfer_list, &m->transfers))
371 spi_flags |= FALCON_SPI_XFER_END;
373 spin_lock_irqsave(&ebu_lock, flags);
374 ret = falcon_sflash_xfer(m->spi, t, spi_flags);
375 spin_unlock_irqrestore(&ebu_lock, flags);
377 if (ret)
378 break;
380 m->actual_length += t->len;
382 WARN_ON(t->delay_usecs || t->cs_change);
383 spi_flags = 0;
386 m->status = ret;
387 spi_finalize_current_message(master);
389 return 0;
392 static int falcon_sflash_probe(struct platform_device *pdev)
394 struct falcon_sflash *priv;
395 struct spi_master *master;
396 int ret;
398 if (ltq_boot_select() != BS_SPI) {
399 dev_err(&pdev->dev, "invalid bootstrap options\n");
400 return -ENODEV;
403 master = spi_alloc_master(&pdev->dev, sizeof(*priv));
404 if (!master)
405 return -ENOMEM;
407 priv = spi_master_get_devdata(master);
408 priv->master = master;
410 master->mode_bits = SPI_MODE_3;
411 master->flags = SPI_MASTER_HALF_DUPLEX;
412 master->setup = falcon_sflash_setup;
413 master->transfer_one_message = falcon_sflash_xfer_one;
414 master->dev.of_node = pdev->dev.of_node;
416 ret = devm_spi_register_master(&pdev->dev, master);
417 if (ret)
418 spi_master_put(master);
419 return ret;
422 static const struct of_device_id falcon_sflash_match[] = {
423 { .compatible = "lantiq,sflash-falcon" },
426 MODULE_DEVICE_TABLE(of, falcon_sflash_match);
428 static struct platform_driver falcon_sflash_driver = {
429 .probe = falcon_sflash_probe,
430 .driver = {
431 .name = DRV_NAME,
432 .of_match_table = falcon_sflash_match,
436 module_platform_driver(falcon_sflash_driver);
438 MODULE_LICENSE("GPL");
439 MODULE_DESCRIPTION("Lantiq Falcon SPI/SFLASH controller driver");