drivers/usb/chipidea/host.c

   1 /*
   2  * host.c - ChipIdea USB host controller driver
   3  *
   4  * Copyright (c) 2012 Intel Corporation
   5  *
   6  * Author: Alexander Shishkin
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  20  */
  21
  22 #include <linux/kernel.h>
  23 #include <linux/io.h>
  24 #include <linux/usb.h>
  25 #include <linux/usb/hcd.h>
  26 #include <linux/usb/chipidea.h>
  27 #include <linux/regulator/consumer.h>
  28
  29 #include "../host/ehci.h"
  30
  31 #include "ci.h"
  32 #include "bits.h"
  33 #include "host.h"
  34
  35 static struct hc_driver __read_mostly ci_ehci_hc_driver;
  36 static int (*orig_bus_suspend)(struct usb_hcd *hcd);
  37
  38 struct ehci_ci_priv {
  39         struct regulator *reg_vbus;
  40         struct ci_hdrc *ci;
  41 };
  42
  43 static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable)
  44 {
  45         struct ehci_hcd *ehci = hcd_to_ehci(hcd);
  46         struct ehci_ci_priv *priv = (struct ehci_ci_priv *)ehci->priv;
  47         struct ci_hdrc *ci = priv->ci;
  48         struct device *dev = hcd->self.controller;
  49         int ret = 0;
  50         int port = HCS_N_PORTS(ehci->hcs_params);
  51
  52         if (priv->reg_vbus) {
  53                 if (port > 1) {
  54                         dev_warn(dev,
  55                                 "Not support multi-port regulator control\n");
  56                         return 0;
  57                 }
  58                 if (enable)
  59                         ret = regulator_enable(priv->reg_vbus);
  60                 else
  61                         ret = regulator_disable(priv->reg_vbus);
  62                 if (ret) {
  63                         dev_err(dev,
  64                                 "Failed to %s vbus regulator, ret=%d\n",
  65                                 enable ? "enable" : "disable", ret);
  66                         return ret;
  67                 }
  68         }
  69
  70         if (enable && (ci->platdata->phy_mode == USBPHY_INTERFACE_MODE_HSIC)) {
  71                 /*
  72                  * Marvell 28nm HSIC PHY requires forcing the port to HS mode.
  73                  * As HSIC is always HS, this should be safe for others.
  74                  */
  75                 hw_port_test_set(ci, 5);
  76                 hw_port_test_set(ci, 0);
  77         }
  78         return 0;
  79 };
  80
  81 static const struct ehci_driver_overrides ehci_ci_overrides = {
  82         .extra_priv_size = sizeof(struct ehci_ci_priv),
  83         .port_power      = ehci_ci_portpower,
  84 };
  85
  86 static irqreturn_t host_irq(struct ci_hdrc *ci)
  87 {
  88         return usb_hcd_irq(ci->irq, ci->hcd);
  89 }
  90
  91 static int host_start(struct ci_hdrc *ci)
  92 {
  93         struct usb_hcd *hcd;
  94         struct ehci_hcd *ehci;
  95         struct ehci_ci_priv *priv;
  96         int ret;
  97
  98         if (usb_disabled())
  99                 return -ENODEV;
 100
 101         hcd = usb_create_hcd(&ci_ehci_hc_driver, ci->dev, dev_name(ci->dev));
 102         if (!hcd)
 103                 return -ENOMEM;
 104
 105         dev_set_drvdata(ci->dev, ci);
 106         hcd->rsrc_start = ci->hw_bank.phys;
 107         hcd->rsrc_len = ci->hw_bank.size;
 108         hcd->regs = ci->hw_bank.abs;
 109         hcd->has_tt = 1;
 110
 111         hcd->power_budget = ci->platdata->power_budget;
 112         hcd->tpl_support = ci->platdata->tpl_support;
 113         if (ci->phy)
 114                 hcd->phy = ci->phy;
 115         else
 116                 hcd->usb_phy = ci->usb_phy;
 117
 118         ehci = hcd_to_ehci(hcd);
 119         ehci->caps = ci->hw_bank.cap;
 120         ehci->has_hostpc = ci->hw_bank.lpm;
 121         ehci->has_tdi_phy_lpm = ci->hw_bank.lpm;
 122         ehci->imx28_write_fix = ci->imx28_write_fix;
 123
 124         priv = (struct ehci_ci_priv *)ehci->priv;
 125         priv->reg_vbus = NULL;
 126         priv->ci = ci;
 127
 128         if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) {
 129                 if (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON) {
 130                         ret = regulator_enable(ci->platdata->reg_vbus);
 131                         if (ret) {
 132                                 dev_err(ci->dev,
 133                                 "Failed to enable vbus regulator, ret=%d\n",
 134                                                                         ret);
 135                                 goto put_hcd;
 136                         }
 137                 } else {
 138                         priv->reg_vbus = ci->platdata->reg_vbus;
 139                 }
 140         }
 141
 142         ret = usb_add_hcd(hcd, 0, 0);
 143         if (ret) {
 144                 goto disable_reg;
 145         } else {
 146                 struct usb_otg *otg = &ci->otg;
 147
 148                 ci->hcd = hcd;
 149
 150                 if (ci_otg_is_fsm_mode(ci)) {
 151                         otg->host = &hcd->self;
 152                         hcd->self.otg_port = 1;
 153                 }
 154         }
 155
 156         if (ci->platdata->flags & CI_HDRC_DISABLE_STREAMING)
 157                 hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
 158
 159         if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED)
 160                 hw_write(ci, OP_PORTSC, PORTSC_PFSC, PORTSC_PFSC);
 161
 162         return ret;
 163
 164 disable_reg:
 165         if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) &&
 166                         (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON))
 167                 regulator_disable(ci->platdata->reg_vbus);
 168 put_hcd:
 169         usb_put_hcd(hcd);
 170
 171         return ret;
 172 }
 173
 174 static void host_stop(struct ci_hdrc *ci)
 175 {
 176         struct usb_hcd *hcd = ci->hcd;
 177
 178         if (hcd) {
 179                 usb_remove_hcd(hcd);
 180                 usb_put_hcd(hcd);
 181                 if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) &&
 182                         (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON))
 183                                 regulator_disable(ci->platdata->reg_vbus);
 184         }
 185 }
 186
 187
 188 void ci_hdrc_host_destroy(struct ci_hdrc *ci)
 189 {
 190         if (ci->role == CI_ROLE_HOST && ci->hcd)
 191                 host_stop(ci);
 192 }
 193
 194 static int ci_ehci_bus_suspend(struct usb_hcd *hcd)
 195 {
 196         struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 197         int port;
 198         u32 tmp;
 199
 200         int ret = orig_bus_suspend(hcd);
 201
 202         if (ret)
 203                 return ret;
 204
 205         port = HCS_N_PORTS(ehci->hcs_params);
 206         while (port--) {
 207                 u32 __iomem *reg = &ehci->regs->port_status[port];
 208                 u32 portsc = ehci_readl(ehci, reg);
 209
 210                 if (portsc & PORT_CONNECT) {
 211                         /*
 212                          * For chipidea, the resume signal will be ended
 213                          * automatically, so for remote wakeup case, the
 214                          * usbcmd.rs may not be set before the resume has
 215                          * ended if other resume paths consumes too much
 216                          * time (~24ms), in that case, the SOF will not
 217                          * send out within 3ms after resume ends, then the
 218                          * high speed device will enter full speed mode.
 219                          */
 220
 221                         tmp = ehci_readl(ehci, &ehci->regs->command);
 222                         tmp |= CMD_RUN;
 223                         ehci_writel(ehci, tmp, &ehci->regs->command);
 224                         /*
 225                          * It needs a short delay between set RS bit and PHCD.
 226                          */
 227                         usleep_range(150, 200);
 228                         break;
 229                 }
 230         }
 231
 232         return 0;
 233 }
 234
 235 int ci_hdrc_host_init(struct ci_hdrc *ci)
 236 {
 237         struct ci_role_driver *rdrv;
 238
 239         if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_HC))
 240                 return -ENXIO;
 241
 242         rdrv = devm_kzalloc(ci->dev, sizeof(struct ci_role_driver), GFP_KERNEL);
 243         if (!rdrv)
 244                 return -ENOMEM;
 245
 246         rdrv->start     = host_start;
 247         rdrv->stop      = host_stop;
 248         rdrv->irq       = host_irq;
 249         rdrv->name      = "host";
 250         ci->roles[CI_ROLE_HOST] = rdrv;
 251
 252         return 0;
 253 }
 254
 255 void ci_hdrc_host_driver_init(void)
 256 {
 257         ehci_init_driver(&ci_ehci_hc_driver, &ehci_ci_overrides);
 258         orig_bus_suspend = ci_ehci_hc_driver.bus_suspend;
 259         ci_ehci_hc_driver.bus_suspend = ci_ehci_bus_suspend;
 260 }