drivers/usb/gadget/udc/amd5536udc.c

   1 /*
   2  * amd5536.c -- AMD 5536 UDC high/full speed USB device controller
   3  *
   4  * Copyright (C) 2005-2007 AMD (http://www.amd.com)
   5  * Author: Thomas Dahlmann
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  */
  12
  13 /*
  14  * The AMD5536 UDC is part of the x86 southbridge AMD Geode CS5536.
  15  * It is a USB Highspeed DMA capable USB device controller. Beside ep0 it
  16  * provides 4 IN and 4 OUT endpoints (bulk or interrupt type).
  17  *
  18  * Make sure that UDC is assigned to port 4 by BIOS settings (port can also
  19  * be used as host port) and UOC bits PAD_EN and APU are set (should be done
  20  * by BIOS init).
  21  *
  22  * UDC DMA requires 32-bit aligned buffers so DMA with gadget ether does not
  23  * work without updating NET_IP_ALIGN. Or PIO mode (module param "use_dma=0")
  24  * can be used with gadget ether.
  25  */
  26
  27 /* debug control */
  28 /* #define UDC_VERBOSE */
  29
  30 /* Driver strings */
  31 #define UDC_MOD_DESCRIPTION             "AMD 5536 UDC - USB Device Controller"
  32 #define UDC_DRIVER_VERSION_STRING       "01.00.0206"
  33
  34 /* system */
  35 #include <linux/module.h>
  36 #include <linux/pci.h>
  37 #include <linux/kernel.h>
  38 #include <linux/delay.h>
  39 #include <linux/ioport.h>
  40 #include <linux/sched.h>
  41 #include <linux/slab.h>
  42 #include <linux/errno.h>
  43 #include <linux/timer.h>
  44 #include <linux/list.h>
  45 #include <linux/interrupt.h>
  46 #include <linux/ioctl.h>
  47 #include <linux/fs.h>
  48 #include <linux/dmapool.h>
  49 #include <linux/moduleparam.h>
  50 #include <linux/device.h>
  51 #include <linux/io.h>
  52 #include <linux/irq.h>
  53 #include <linux/prefetch.h>
  54
  55 #include <asm/byteorder.h>
  56 #include <asm/unaligned.h>
  57
  58 /* gadget stack */
  59 #include <linux/usb/ch9.h>
  60 #include <linux/usb/gadget.h>
  61
  62 /* udc specific */
  63 #include "amd5536udc.h"
  64
  65
  66 static void udc_tasklet_disconnect(unsigned long);
  67 static void empty_req_queue(struct udc_ep *);
  68 static int udc_probe(struct udc *dev);
  69 static void udc_basic_init(struct udc *dev);
  70 static void udc_setup_endpoints(struct udc *dev);
  71 static void udc_soft_reset(struct udc *dev);
  72 static struct udc_request *udc_alloc_bna_dummy(struct udc_ep *ep);
  73 static void udc_free_request(struct usb_ep *usbep, struct usb_request *usbreq);
  74 static int udc_free_dma_chain(struct udc *dev, struct udc_request *req);
  75 static int udc_create_dma_chain(struct udc_ep *ep, struct udc_request *req,
  76                                 unsigned long buf_len, gfp_t gfp_flags);
  77 static int udc_remote_wakeup(struct udc *dev);
  78 static int udc_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id);
  79 static void udc_pci_remove(struct pci_dev *pdev);
  80
  81 /* description */
  82 static const char mod_desc[] = UDC_MOD_DESCRIPTION;
  83 static const char name[] = "amd5536udc";
  84
  85 /* structure to hold endpoint function pointers */
  86 static const struct usb_ep_ops udc_ep_ops;
  87
  88 /* received setup data */
  89 static union udc_setup_data setup_data;
  90
  91 /* pointer to device object */
  92 static struct udc *udc;
  93
  94 /* irq spin lock for soft reset */
  95 static DEFINE_SPINLOCK(udc_irq_spinlock);
  96 /* stall spin lock */
  97 static DEFINE_SPINLOCK(udc_stall_spinlock);
  98
  99 /*
 100 * slave mode: pending bytes in rx fifo after nyet,
 101 * used if EPIN irq came but no req was available
 102 */
 103 static unsigned int udc_rxfifo_pending;
 104
 105 /* count soft resets after suspend to avoid loop */
 106 static int soft_reset_occured;
 107 static int soft_reset_after_usbreset_occured;
 108
 109 /* timer */
 110 static struct timer_list udc_timer;
 111 static int stop_timer;
 112
 113 /* set_rde -- Is used to control enabling of RX DMA. Problem is
 114  * that UDC has only one bit (RDE) to enable/disable RX DMA for
 115  * all OUT endpoints. So we have to handle race conditions like
 116  * when OUT data reaches the fifo but no request was queued yet.
 117  * This cannot be solved by letting the RX DMA disabled until a
 118  * request gets queued because there may be other OUT packets
 119  * in the FIFO (important for not blocking control traffic).
 120  * The value of set_rde controls the correspondig timer.
 121  *
 122  * set_rde -1 == not used, means it is alloed to be set to 0 or 1
 123  * set_rde  0 == do not touch RDE, do no start the RDE timer
 124  * set_rde  1 == timer function will look whether FIFO has data
 125  * set_rde  2 == set by timer function to enable RX DMA on next call
 126  */
 127 static int set_rde = -1;
 128
 129 static DECLARE_COMPLETION(on_exit);
 130 static struct timer_list udc_pollstall_timer;
 131 static int stop_pollstall_timer;
 132 static DECLARE_COMPLETION(on_pollstall_exit);
 133
 134 /* tasklet for usb disconnect */
 135 static DECLARE_TASKLET(disconnect_tasklet, udc_tasklet_disconnect,
 136                 (unsigned long) &udc);
 137
 138
 139 /* endpoint names used for print */
 140 static const char ep0_string[] = "ep0in";
 141 static const char *const ep_string[] = {
 142         ep0_string,
 143         "ep1in-int", "ep2in-bulk", "ep3in-bulk", "ep4in-bulk", "ep5in-bulk",
 144         "ep6in-bulk", "ep7in-bulk", "ep8in-bulk", "ep9in-bulk", "ep10in-bulk",
 145         "ep11in-bulk", "ep12in-bulk", "ep13in-bulk", "ep14in-bulk",
 146         "ep15in-bulk", "ep0out", "ep1out-bulk", "ep2out-bulk", "ep3out-bulk",
 147         "ep4out-bulk", "ep5out-bulk", "ep6out-bulk", "ep7out-bulk",
 148         "ep8out-bulk", "ep9out-bulk", "ep10out-bulk", "ep11out-bulk",
 149         "ep12out-bulk", "ep13out-bulk", "ep14out-bulk", "ep15out-bulk"
 150 };
 151
 152 /* DMA usage flag */
 153 static bool use_dma = 1;
 154 /* packet per buffer dma */
 155 static bool use_dma_ppb = 1;
 156 /* with per descr. update */
 157 static bool use_dma_ppb_du;
 158 /* buffer fill mode */
 159 static int use_dma_bufferfill_mode;
 160 /* full speed only mode */
 161 static bool use_fullspeed;
 162 /* tx buffer size for high speed */
 163 static unsigned long hs_tx_buf = UDC_EPIN_BUFF_SIZE;
 164
 165 /* module parameters */
 166 module_param(use_dma, bool, S_IRUGO);
 167 MODULE_PARM_DESC(use_dma, "true for DMA");
 168 module_param(use_dma_ppb, bool, S_IRUGO);
 169 MODULE_PARM_DESC(use_dma_ppb, "true for DMA in packet per buffer mode");
 170 module_param(use_dma_ppb_du, bool, S_IRUGO);
 171 MODULE_PARM_DESC(use_dma_ppb_du,
 172         "true for DMA in packet per buffer mode with descriptor update");
 173 module_param(use_fullspeed, bool, S_IRUGO);
 174 MODULE_PARM_DESC(use_fullspeed, "true for fullspeed only");
 175
 176 /*---------------------------------------------------------------------------*/
 177 /* Prints UDC device registers and endpoint irq registers */
 178 static void print_regs(struct udc *dev)
 179 {
 180         DBG(dev, "------- Device registers -------\n");
 181         DBG(dev, "dev config     = %08x\n", readl(&dev->regs->cfg));
 182         DBG(dev, "dev control    = %08x\n", readl(&dev->regs->ctl));
 183         DBG(dev, "dev status     = %08x\n", readl(&dev->regs->sts));
 184         DBG(dev, "\n");
 185         DBG(dev, "dev int's      = %08x\n", readl(&dev->regs->irqsts));
 186         DBG(dev, "dev intmask    = %08x\n", readl(&dev->regs->irqmsk));
 187         DBG(dev, "\n");
 188         DBG(dev, "dev ep int's   = %08x\n", readl(&dev->regs->ep_irqsts));
 189         DBG(dev, "dev ep intmask = %08x\n", readl(&dev->regs->ep_irqmsk));
 190         DBG(dev, "\n");
 191         DBG(dev, "USE DMA        = %d\n", use_dma);
 192         if (use_dma && use_dma_ppb && !use_dma_ppb_du) {
 193                 DBG(dev, "DMA mode       = PPBNDU (packet per buffer "
 194                         "WITHOUT desc. update)\n");
 195                 dev_info(&dev->pdev->dev, "DMA mode (%s)\n", "PPBNDU");
 196         } else if (use_dma && use_dma_ppb && use_dma_ppb_du) {
 197                 DBG(dev, "DMA mode       = PPBDU (packet per buffer "
 198                         "WITH desc. update)\n");
 199                 dev_info(&dev->pdev->dev, "DMA mode (%s)\n", "PPBDU");
 200         }
 201         if (use_dma && use_dma_bufferfill_mode) {
 202                 DBG(dev, "DMA mode       = BF (buffer fill mode)\n");
 203                 dev_info(&dev->pdev->dev, "DMA mode (%s)\n", "BF");
 204         }
 205         if (!use_dma)
 206                 dev_info(&dev->pdev->dev, "FIFO mode\n");
 207         DBG(dev, "-------------------------------------------------------\n");
 208 }
 209
 210 /* Masks unused interrupts */
 211 static int udc_mask_unused_interrupts(struct udc *dev)
 212 {
 213         u32 tmp;
 214
 215         /* mask all dev interrupts */
 216         tmp =   AMD_BIT(UDC_DEVINT_SVC) |
 217                 AMD_BIT(UDC_DEVINT_ENUM) |
 218                 AMD_BIT(UDC_DEVINT_US) |
 219                 AMD_BIT(UDC_DEVINT_UR) |
 220                 AMD_BIT(UDC_DEVINT_ES) |
 221                 AMD_BIT(UDC_DEVINT_SI) |
 222                 AMD_BIT(UDC_DEVINT_SOF)|
 223                 AMD_BIT(UDC_DEVINT_SC);
 224         writel(tmp, &dev->regs->irqmsk);
 225
 226         /* mask all ep interrupts */
 227         writel(UDC_EPINT_MSK_DISABLE_ALL, &dev->regs->ep_irqmsk);
 228
 229         return 0;
 230 }
 231
 232 /* Enables endpoint 0 interrupts */
 233 static int udc_enable_ep0_interrupts(struct udc *dev)
 234 {
 235         u32 tmp;
 236
 237         DBG(dev, "udc_enable_ep0_interrupts()\n");
 238
 239         /* read irq mask */
 240         tmp = readl(&dev->regs->ep_irqmsk);
 241         /* enable ep0 irq's */
 242         tmp &= AMD_UNMASK_BIT(UDC_EPINT_IN_EP0)
 243                 & AMD_UNMASK_BIT(UDC_EPINT_OUT_EP0);
 244         writel(tmp, &dev->regs->ep_irqmsk);
 245
 246         return 0;
 247 }
 248
 249 /* Enables device interrupts for SET_INTF and SET_CONFIG */
 250 static int udc_enable_dev_setup_interrupts(struct udc *dev)
 251 {
 252         u32 tmp;
 253
 254         DBG(dev, "enable device interrupts for setup data\n");
 255
 256         /* read irq mask */
 257         tmp = readl(&dev->regs->irqmsk);
 258
 259         /* enable SET_INTERFACE, SET_CONFIG and other needed irq's */
 260         tmp &= AMD_UNMASK_BIT(UDC_DEVINT_SI)
 261                 & AMD_UNMASK_BIT(UDC_DEVINT_SC)
 262                 & AMD_UNMASK_BIT(UDC_DEVINT_UR)
 263                 & AMD_UNMASK_BIT(UDC_DEVINT_SVC)
 264                 & AMD_UNMASK_BIT(UDC_DEVINT_ENUM);
 265         writel(tmp, &dev->regs->irqmsk);
 266
 267         return 0;
 268 }
 269
 270 /* Calculates fifo start of endpoint based on preceding endpoints */
 271 static int udc_set_txfifo_addr(struct udc_ep *ep)
 272 {
 273         struct udc      *dev;
 274         u32 tmp;
 275         int i;
 276
 277         if (!ep || !(ep->in))
 278                 return -EINVAL;
 279
 280         dev = ep->dev;
 281         ep->txfifo = dev->txfifo;
 282
 283         /* traverse ep's */
 284         for (i = 0; i < ep->num; i++) {
 285                 if (dev->ep[i].regs) {
 286                         /* read fifo size */
 287                         tmp = readl(&dev->ep[i].regs->bufin_framenum);
 288                         tmp = AMD_GETBITS(tmp, UDC_EPIN_BUFF_SIZE);
 289                         ep->txfifo += tmp;
 290                 }
 291         }
 292         return 0;
 293 }
 294
 295 /* CNAK pending field: bit0 = ep0in, bit16 = ep0out */
 296 static u32 cnak_pending;
 297
 298 static void UDC_QUEUE_CNAK(struct udc_ep *ep, unsigned num)
 299 {
 300         if (readl(&ep->regs->ctl) & AMD_BIT(UDC_EPCTL_NAK)) {
 301                 DBG(ep->dev, "NAK could not be cleared for ep%d\n", num);
 302                 cnak_pending |= 1 << (num);
 303                 ep->naking = 1;
 304         } else
 305                 cnak_pending = cnak_pending & (~(1 << (num)));
 306 }
 307
 308
 309 /* Enables endpoint, is called by gadget driver */
 310 static int
 311 udc_ep_enable(struct usb_ep *usbep, const struct usb_endpoint_descriptor *desc)
 312 {
 313         struct udc_ep           *ep;
 314         struct udc              *dev;
 315         u32                     tmp;
 316         unsigned long           iflags;
 317         u8 udc_csr_epix;
 318         unsigned                maxpacket;
 319
 320         if (!usbep
 321                         || usbep->name == ep0_string
 322                         || !desc
 323                         || desc->bDescriptorType != USB_DT_ENDPOINT)
 324                 return -EINVAL;
 325
 326         ep = container_of(usbep, struct udc_ep, ep);
 327         dev = ep->dev;
 328
 329         DBG(dev, "udc_ep_enable() ep %d\n", ep->num);
 330
 331         if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
 332                 return -ESHUTDOWN;
 333
 334         spin_lock_irqsave(&dev->lock, iflags);
 335         ep->ep.desc = desc;
 336
 337         ep->halted = 0;
 338
 339         /* set traffic type */
 340         tmp = readl(&dev->ep[ep->num].regs->ctl);
 341         tmp = AMD_ADDBITS(tmp, desc->bmAttributes, UDC_EPCTL_ET);
 342         writel(tmp, &dev->ep[ep->num].regs->ctl);
 343
 344         /* set max packet size */
 345         maxpacket = usb_endpoint_maxp(desc);
 346         tmp = readl(&dev->ep[ep->num].regs->bufout_maxpkt);
 347         tmp = AMD_ADDBITS(tmp, maxpacket, UDC_EP_MAX_PKT_SIZE);
 348         ep->ep.maxpacket = maxpacket;
 349         writel(tmp, &dev->ep[ep->num].regs->bufout_maxpkt);
 350
 351         /* IN ep */
 352         if (ep->in) {
 353
 354                 /* ep ix in UDC CSR register space */
 355                 udc_csr_epix = ep->num;
 356
 357                 /* set buffer size (tx fifo entries) */
 358                 tmp = readl(&dev->ep[ep->num].regs->bufin_framenum);
 359                 /* double buffering: fifo size = 2 x max packet size */
 360                 tmp = AMD_ADDBITS(
 361                                 tmp,
 362                                 maxpacket * UDC_EPIN_BUFF_SIZE_MULT
 363                                           / UDC_DWORD_BYTES,
 364                                 UDC_EPIN_BUFF_SIZE);
 365                 writel(tmp, &dev->ep[ep->num].regs->bufin_framenum);
 366
 367                 /* calc. tx fifo base addr */
 368                 udc_set_txfifo_addr(ep);
 369
 370                 /* flush fifo */
 371                 tmp = readl(&ep->regs->ctl);
 372                 tmp |= AMD_BIT(UDC_EPCTL_F);
 373                 writel(tmp, &ep->regs->ctl);
 374
 375         /* OUT ep */
 376         } else {
 377                 /* ep ix in UDC CSR register space */
 378                 udc_csr_epix = ep->num - UDC_CSR_EP_OUT_IX_OFS;
 379
 380                 /* set max packet size UDC CSR  */
 381                 tmp = readl(&dev->csr->ne[ep->num - UDC_CSR_EP_OUT_IX_OFS]);
 382                 tmp = AMD_ADDBITS(tmp, maxpacket,
 383                                         UDC_CSR_NE_MAX_PKT);
 384                 writel(tmp, &dev->csr->ne[ep->num - UDC_CSR_EP_OUT_IX_OFS]);
 385
 386                 if (use_dma && !ep->in) {
 387                         /* alloc and init BNA dummy request */
 388                         ep->bna_dummy_req = udc_alloc_bna_dummy(ep);
 389                         ep->bna_occurred = 0;
 390                 }
 391
 392                 if (ep->num != UDC_EP0OUT_IX)
 393                         dev->data_ep_enabled = 1;
 394         }
 395
 396         /* set ep values */
 397         tmp = readl(&dev->csr->ne[udc_csr_epix]);
 398         /* max packet */
 399         tmp = AMD_ADDBITS(tmp, maxpacket, UDC_CSR_NE_MAX_PKT);
 400         /* ep number */
 401         tmp = AMD_ADDBITS(tmp, desc->bEndpointAddress, UDC_CSR_NE_NUM);
 402         /* ep direction */
 403         tmp = AMD_ADDBITS(tmp, ep->in, UDC_CSR_NE_DIR);
 404         /* ep type */
 405         tmp = AMD_ADDBITS(tmp, desc->bmAttributes, UDC_CSR_NE_TYPE);
 406         /* ep config */
 407         tmp = AMD_ADDBITS(tmp, ep->dev->cur_config, UDC_CSR_NE_CFG);
 408         /* ep interface */
 409         tmp = AMD_ADDBITS(tmp, ep->dev->cur_intf, UDC_CSR_NE_INTF);
 410         /* ep alt */
 411         tmp = AMD_ADDBITS(tmp, ep->dev->cur_alt, UDC_CSR_NE_ALT);
 412         /* write reg */
 413         writel(tmp, &dev->csr->ne[udc_csr_epix]);
 414
 415         /* enable ep irq */
 416         tmp = readl(&dev->regs->ep_irqmsk);
 417         tmp &= AMD_UNMASK_BIT(ep->num);
 418         writel(tmp, &dev->regs->ep_irqmsk);
 419
 420         /*
 421          * clear NAK by writing CNAK
 422          * avoid BNA for OUT DMA, don't clear NAK until DMA desc. written
 423          */
 424         if (!use_dma || ep->in) {
 425                 tmp = readl(&ep->regs->ctl);
 426                 tmp |= AMD_BIT(UDC_EPCTL_CNAK);
 427                 writel(tmp, &ep->regs->ctl);
 428                 ep->naking = 0;
 429                 UDC_QUEUE_CNAK(ep, ep->num);
 430         }
 431         tmp = desc->bEndpointAddress;
 432         DBG(dev, "%s enabled\n", usbep->name);
 433
 434         spin_unlock_irqrestore(&dev->lock, iflags);
 435         return 0;
 436 }
 437
 438 /* Resets endpoint */
 439 static void ep_init(struct udc_regs __iomem *regs, struct udc_ep *ep)
 440 {
 441         u32             tmp;
 442
 443         VDBG(ep->dev, "ep-%d reset\n", ep->num);
 444         ep->ep.desc = NULL;
 445         ep->ep.ops = &udc_ep_ops;
 446         INIT_LIST_HEAD(&ep->queue);
 447
 448         usb_ep_set_maxpacket_limit(&ep->ep,(u16) ~0);
 449         /* set NAK */
 450         tmp = readl(&ep->regs->ctl);
 451         tmp |= AMD_BIT(UDC_EPCTL_SNAK);
 452         writel(tmp, &ep->regs->ctl);
 453         ep->naking = 1;
 454
 455         /* disable interrupt */
 456         tmp = readl(&regs->ep_irqmsk);
 457         tmp |= AMD_BIT(ep->num);
 458         writel(tmp, &regs->ep_irqmsk);
 459
 460         if (ep->in) {
 461                 /* unset P and IN bit of potential former DMA */
 462                 tmp = readl(&ep->regs->ctl);
 463                 tmp &= AMD_UNMASK_BIT(UDC_EPCTL_P);
 464                 writel(tmp, &ep->regs->ctl);
 465
 466                 tmp = readl(&ep->regs->sts);
 467                 tmp |= AMD_BIT(UDC_EPSTS_IN);
 468                 writel(tmp, &ep->regs->sts);
 469
 470                 /* flush the fifo */
 471                 tmp = readl(&ep->regs->ctl);
 472                 tmp |= AMD_BIT(UDC_EPCTL_F);
 473                 writel(tmp, &ep->regs->ctl);
 474
 475         }
 476         /* reset desc pointer */
 477         writel(0, &ep->regs->desptr);
 478 }
 479
 480 /* Disables endpoint, is called by gadget driver */
 481 static int udc_ep_disable(struct usb_ep *usbep)
 482 {
 483         struct udc_ep   *ep = NULL;
 484         unsigned long   iflags;
 485
 486         if (!usbep)
 487                 return -EINVAL;
 488
 489         ep = container_of(usbep, struct udc_ep, ep);
 490         if (usbep->name == ep0_string || !ep->ep.desc)
 491                 return -EINVAL;
 492
 493         DBG(ep->dev, "Disable ep-%d\n", ep->num);
 494
 495         spin_lock_irqsave(&ep->dev->lock, iflags);
 496         udc_free_request(&ep->ep, &ep->bna_dummy_req->req);
 497         empty_req_queue(ep);
 498         ep_init(ep->dev->regs, ep);
 499         spin_unlock_irqrestore(&ep->dev->lock, iflags);
 500
 501         return 0;
 502 }
 503
 504 /* Allocates request packet, called by gadget driver */
 505 static struct usb_request *
 506 udc_alloc_request(struct usb_ep *usbep, gfp_t gfp)
 507 {
 508         struct udc_request      *req;
 509         struct udc_data_dma     *dma_desc;
 510         struct udc_ep   *ep;
 511
 512         if (!usbep)
 513                 return NULL;
 514
 515         ep = container_of(usbep, struct udc_ep, ep);
 516
 517         VDBG(ep->dev, "udc_alloc_req(): ep%d\n", ep->num);
 518         req = kzalloc(sizeof(struct udc_request), gfp);
 519         if (!req)
 520                 return NULL;
 521
 522         req->req.dma = DMA_DONT_USE;
 523         INIT_LIST_HEAD(&req->queue);
 524
 525         if (ep->dma) {
 526                 /* ep0 in requests are allocated from data pool here */
 527                 dma_desc = pci_pool_alloc(ep->dev->data_requests, gfp,
 528                                                 &req->td_phys);
 529                 if (!dma_desc) {
 530                         kfree(req);
 531                         return NULL;
 532                 }
 533
 534                 VDBG(ep->dev, "udc_alloc_req: req = %p dma_desc = %p, "
 535                                 "td_phys = %lx\n",
 536                                 req, dma_desc,
 537                                 (unsigned long)req->td_phys);
 538                 /* prevent from using desc. - set HOST BUSY */
 539                 dma_desc->status = AMD_ADDBITS(dma_desc->status,
 540                                                 UDC_DMA_STP_STS_BS_HOST_BUSY,
 541                                                 UDC_DMA_STP_STS_BS);
 542                 dma_desc->bufptr = cpu_to_le32(DMA_DONT_USE);
 543                 req->td_data = dma_desc;
 544                 req->td_data_last = NULL;
 545                 req->chain_len = 1;
 546         }
 547
 548         return &req->req;
 549 }
 550
 551 /* Frees request packet, called by gadget driver */
 552 static void
 553 udc_free_request(struct usb_ep *usbep, struct usb_request *usbreq)
 554 {
 555         struct udc_ep   *ep;
 556         struct udc_request      *req;
 557
 558         if (!usbep || !usbreq)
 559                 return;
 560
 561         ep = container_of(usbep, struct udc_ep, ep);
 562         req = container_of(usbreq, struct udc_request, req);
 563         VDBG(ep->dev, "free_req req=%p\n", req);
 564         BUG_ON(!list_empty(&req->queue));
 565         if (req->td_data) {
 566                 VDBG(ep->dev, "req->td_data=%p\n", req->td_data);
 567
 568                 /* free dma chain if created */
 569                 if (req->chain_len > 1)
 570                         udc_free_dma_chain(ep->dev, req);
 571
 572                 pci_pool_free(ep->dev->data_requests, req->td_data,
 573                                                         req->td_phys);
 574         }
 575         kfree(req);
 576 }
 577
 578 /* Init BNA dummy descriptor for HOST BUSY and pointing to itself */
 579 static void udc_init_bna_dummy(struct udc_request *req)
 580 {
 581         if (req) {
 582                 /* set last bit */
 583                 req->td_data->status |= AMD_BIT(UDC_DMA_IN_STS_L);
 584                 /* set next pointer to itself */
 585                 req->td_data->next = req->td_phys;
 586                 /* set HOST BUSY */
 587                 req->td_data->status
 588                         = AMD_ADDBITS(req->td_data->status,
 589                                         UDC_DMA_STP_STS_BS_DMA_DONE,
 590                                         UDC_DMA_STP_STS_BS);
 591 #ifdef UDC_VERBOSE
 592                 pr_debug("bna desc = %p, sts = %08x\n",
 593                         req->td_data, req->td_data->status);
 594 #endif
 595         }
 596 }
 597
 598 /* Allocate BNA dummy descriptor */
 599 static struct udc_request *udc_alloc_bna_dummy(struct udc_ep *ep)
 600 {
 601         struct udc_request *req = NULL;
 602         struct usb_request *_req = NULL;
 603
 604         /* alloc the dummy request */
 605         _req = udc_alloc_request(&ep->ep, GFP_ATOMIC);
 606         if (_req) {
 607                 req = container_of(_req, struct udc_request, req);
 608                 ep->bna_dummy_req = req;
 609                 udc_init_bna_dummy(req);
 610         }
 611         return req;
 612 }
 613
 614 /* Write data to TX fifo for IN packets */
 615 static void
 616 udc_txfifo_write(struct udc_ep *ep, struct usb_request *req)
 617 {
 618         u8                      *req_buf;
 619         u32                     *buf;
 620         int                     i, j;
 621         unsigned                bytes = 0;
 622         unsigned                remaining = 0;
 623
 624         if (!req || !ep)
 625                 return;
 626
 627         req_buf = req->buf + req->actual;
 628         prefetch(req_buf);
 629         remaining = req->length - req->actual;
 630
 631         buf = (u32 *) req_buf;
 632
 633         bytes = ep->ep.maxpacket;
 634         if (bytes > remaining)
 635                 bytes = remaining;
 636
 637         /* dwords first */
 638         for (i = 0; i < bytes / UDC_DWORD_BYTES; i++)
 639                 writel(*(buf + i), ep->txfifo);
 640
 641         /* remaining bytes must be written by byte access */
 642         for (j = 0; j < bytes % UDC_DWORD_BYTES; j++) {
 643                 writeb((u8)(*(buf + i) >> (j << UDC_BITS_PER_BYTE_SHIFT)),
 644                                                         ep->txfifo);
 645         }
 646
 647         /* dummy write confirm */
 648         writel(0, &ep->regs->confirm);
 649 }
 650
 651 /* Read dwords from RX fifo for OUT transfers */
 652 static int udc_rxfifo_read_dwords(struct udc *dev, u32 *buf, int dwords)
 653 {
 654         int i;
 655
 656         VDBG(dev, "udc_read_dwords(): %d dwords\n", dwords);
 657
 658         for (i = 0; i < dwords; i++)
 659                 *(buf + i) = readl(dev->rxfifo);
 660         return 0;
 661 }
 662
 663 /* Read bytes from RX fifo for OUT transfers */
 664 static int udc_rxfifo_read_bytes(struct udc *dev, u8 *buf, int bytes)
 665 {
 666         int i, j;
 667         u32 tmp;
 668
 669         VDBG(dev, "udc_read_bytes(): %d bytes\n", bytes);
 670
 671         /* dwords first */
 672         for (i = 0; i < bytes / UDC_DWORD_BYTES; i++)
 673                 *((u32 *)(buf + (i<<2))) = readl(dev->rxfifo);
 674
 675         /* remaining bytes must be read by byte access */
 676         if (bytes % UDC_DWORD_BYTES) {
 677                 tmp = readl(dev->rxfifo);
 678                 for (j = 0; j < bytes % UDC_DWORD_BYTES; j++) {
 679                         *(buf + (i<<2) + j) = (u8)(tmp & UDC_BYTE_MASK);
 680                         tmp = tmp >> UDC_BITS_PER_BYTE;
 681                 }
 682         }
 683
 684         return 0;
 685 }
 686
 687 /* Read data from RX fifo for OUT transfers */
 688 static int
 689 udc_rxfifo_read(struct udc_ep *ep, struct udc_request *req)
 690 {
 691         u8 *buf;
 692         unsigned buf_space;
 693         unsigned bytes = 0;
 694         unsigned finished = 0;
 695
 696         /* received number bytes */
 697         bytes = readl(&ep->regs->sts);
 698         bytes = AMD_GETBITS(bytes, UDC_EPSTS_RX_PKT_SIZE);
 699
 700         buf_space = req->req.length - req->req.actual;
 701         buf = req->req.buf + req->req.actual;
 702         if (bytes > buf_space) {
 703                 if ((buf_space % ep->ep.maxpacket) != 0) {
 704                         DBG(ep->dev,
 705                                 "%s: rx %d bytes, rx-buf space = %d bytesn\n",
 706                                 ep->ep.name, bytes, buf_space);
 707                         req->req.status = -EOVERFLOW;
 708                 }
 709                 bytes = buf_space;
 710         }
 711         req->req.actual += bytes;
 712
 713         /* last packet ? */
 714         if (((bytes % ep->ep.maxpacket) != 0) || (!bytes)
 715                 || ((req->req.actual == req->req.length) && !req->req.zero))
 716                 finished = 1;
 717
 718         /* read rx fifo bytes */
 719         VDBG(ep->dev, "ep %s: rxfifo read %d bytes\n", ep->ep.name, bytes);
 720         udc_rxfifo_read_bytes(ep->dev, buf, bytes);
 721
 722         return finished;
 723 }
 724
 725 /* create/re-init a DMA descriptor or a DMA descriptor chain */
 726 static int prep_dma(struct udc_ep *ep, struct udc_request *req, gfp_t gfp)
 727 {
 728         int     retval = 0;
 729         u32     tmp;
 730
 731         VDBG(ep->dev, "prep_dma\n");
 732         VDBG(ep->dev, "prep_dma ep%d req->td_data=%p\n",
 733                         ep->num, req->td_data);
 734
 735         /* set buffer pointer */
 736         req->td_data->bufptr = req->req.dma;
 737
 738         /* set last bit */
 739         req->td_data->status |= AMD_BIT(UDC_DMA_IN_STS_L);
 740
 741         /* build/re-init dma chain if maxpkt scatter mode, not for EP0 */
 742         if (use_dma_ppb) {
 743
 744                 retval = udc_create_dma_chain(ep, req, ep->ep.maxpacket, gfp);
 745                 if (retval != 0) {
 746                         if (retval == -ENOMEM)
 747                                 DBG(ep->dev, "Out of DMA memory\n");
 748                         return retval;
 749                 }
 750                 if (ep->in) {
 751                         if (req->req.length == ep->ep.maxpacket) {
 752                                 /* write tx bytes */
 753                                 req->td_data->status =
 754                                         AMD_ADDBITS(req->td_data->status,
 755                                                 ep->ep.maxpacket,
 756                                                 UDC_DMA_IN_STS_TXBYTES);
 757
 758                         }
 759                 }
 760
 761         }
 762
 763         if (ep->in) {
 764                 VDBG(ep->dev, "IN: use_dma_ppb=%d req->req.len=%d "
 765                                 "maxpacket=%d ep%d\n",
 766                                 use_dma_ppb, req->req.length,
 767                                 ep->ep.maxpacket, ep->num);
 768                 /*
 769                  * if bytes < max packet then tx bytes must
 770                  * be written in packet per buffer mode
 771                  */
 772                 if (!use_dma_ppb || req->req.length < ep->ep.maxpacket
 773                                 || ep->num == UDC_EP0OUT_IX
 774                                 || ep->num == UDC_EP0IN_IX) {
 775                         /* write tx bytes */
 776                         req->td_data->status =
 777                                 AMD_ADDBITS(req->td_data->status,
 778                                                 req->req.length,
 779                                                 UDC_DMA_IN_STS_TXBYTES);
 780                         /* reset frame num */
 781                         req->td_data->status =
 782                                 AMD_ADDBITS(req->td_data->status,
 783                                                 0,
 784                                                 UDC_DMA_IN_STS_FRAMENUM);
 785                 }
 786                 /* set HOST BUSY */
 787                 req->td_data->status =
 788                         AMD_ADDBITS(req->td_data->status,
 789                                 UDC_DMA_STP_STS_BS_HOST_BUSY,
 790                                 UDC_DMA_STP_STS_BS);
 791         } else {
 792                 VDBG(ep->dev, "OUT set host ready\n");
 793                 /* set HOST READY */
 794                 req->td_data->status =
 795                         AMD_ADDBITS(req->td_data->status,
 796                                 UDC_DMA_STP_STS_BS_HOST_READY,
 797                                 UDC_DMA_STP_STS_BS);
 798
 799
 800                         /* clear NAK by writing CNAK */
 801                         if (ep->naking) {
 802                                 tmp = readl(&ep->regs->ctl);
 803                                 tmp |= AMD_BIT(UDC_EPCTL_CNAK);
 804                                 writel(tmp, &ep->regs->ctl);
 805                                 ep->naking = 0;
 806                                 UDC_QUEUE_CNAK(ep, ep->num);
 807                         }
 808
 809         }
 810
 811         return retval;
 812 }
 813
 814 /* Completes request packet ... caller MUST hold lock */
 815 static void
 816 complete_req(struct udc_ep *ep, struct udc_request *req, int sts)
 817 __releases(ep->dev->lock)
 818 __acquires(ep->dev->lock)
 819 {
 820         struct udc              *dev;
 821         unsigned                halted;
 822
 823         VDBG(ep->dev, "complete_req(): ep%d\n", ep->num);
 824
 825         dev = ep->dev;
 826         /* unmap DMA */
 827         if (ep->dma)
 828                 usb_gadget_unmap_request(&dev->gadget, &req->req, ep->in);
 829
 830         halted = ep->halted;
 831         ep->halted = 1;
 832
 833         /* set new status if pending */
 834         if (req->req.status == -EINPROGRESS)
 835                 req->req.status = sts;
 836
 837         /* remove from ep queue */
 838         list_del_init(&req->queue);
 839
 840         VDBG(ep->dev, "req %p => complete %d bytes at %s with sts %d\n",
 841                 &req->req, req->req.length, ep->ep.name, sts);
 842
 843         spin_unlock(&dev->lock);
 844         usb_gadget_giveback_request(&ep->ep, &req->req);
 845         spin_lock(&dev->lock);
 846         ep->halted = halted;
 847 }
 848
 849 /* frees pci pool descriptors of a DMA chain */
 850 static int udc_free_dma_chain(struct udc *dev, struct udc_request *req)
 851 {
 852
 853         int ret_val = 0;
 854         struct udc_data_dma     *td;
 855         struct udc_data_dma     *td_last = NULL;
 856         unsigned int i;
 857
 858         DBG(dev, "free chain req = %p\n", req);
 859
 860         /* do not free first desc., will be done by free for request */
 861         td_last = req->td_data;
 862         td = phys_to_virt(td_last->next);
 863
 864         for (i = 1; i < req->chain_len; i++) {
 865
 866                 pci_pool_free(dev->data_requests, td,
 867                                 (dma_addr_t) td_last->next);
 868                 td_last = td;
 869                 td = phys_to_virt(td_last->next);
 870         }
 871
 872         return ret_val;
 873 }
 874
 875 /* Iterates to the end of a DMA chain and returns last descriptor */
 876 static struct udc_data_dma *udc_get_last_dma_desc(struct udc_request *req)
 877 {
 878         struct udc_data_dma     *td;
 879
 880         td = req->td_data;
 881         while (td && !(td->status & AMD_BIT(UDC_DMA_IN_STS_L)))
 882                 td = phys_to_virt(td->next);
 883
 884         return td;
 885
 886 }
 887
 888 /* Iterates to the end of a DMA chain and counts bytes received */
 889 static u32 udc_get_ppbdu_rxbytes(struct udc_request *req)
 890 {
 891         struct udc_data_dma     *td;
 892         u32 count;
 893
 894         td = req->td_data;
 895         /* received number bytes */
 896         count = AMD_GETBITS(td->status, UDC_DMA_OUT_STS_RXBYTES);
 897
 898         while (td && !(td->status & AMD_BIT(UDC_DMA_IN_STS_L))) {
 899                 td = phys_to_virt(td->next);
 900                 /* received number bytes */
 901                 if (td) {
 902                         count += AMD_GETBITS(td->status,
 903                                 UDC_DMA_OUT_STS_RXBYTES);
 904                 }
 905         }
 906
 907         return count;
 908
 909 }
 910
 911 /* Creates or re-inits a DMA chain */
 912 static int udc_create_dma_chain(
 913         struct udc_ep *ep,
 914         struct udc_request *req,
 915         unsigned long buf_len, gfp_t gfp_flags
 916 )
 917 {
 918         unsigned long bytes = req->req.length;
 919         unsigned int i;
 920         dma_addr_t dma_addr;
 921         struct udc_data_dma     *td = NULL;
 922         struct udc_data_dma     *last = NULL;
 923         unsigned long txbytes;
 924         unsigned create_new_chain = 0;
 925         unsigned len;
 926
 927         VDBG(ep->dev, "udc_create_dma_chain: bytes=%ld buf_len=%ld\n",
 928                         bytes, buf_len);
 929         dma_addr = DMA_DONT_USE;
 930
 931         /* unset L bit in first desc for OUT */
 932         if (!ep->in)
 933                 req->td_data->status &= AMD_CLEAR_BIT(UDC_DMA_IN_STS_L);
 934
 935         /* alloc only new desc's if not already available */
 936         len = req->req.length / ep->ep.maxpacket;
 937         if (req->req.length % ep->ep.maxpacket)
 938                 len++;
 939
 940         if (len > req->chain_len) {
 941                 /* shorter chain already allocated before */
 942                 if (req->chain_len > 1)
 943                         udc_free_dma_chain(ep->dev, req);
 944                 req->chain_len = len;
 945                 create_new_chain = 1;
 946         }
 947
 948         td = req->td_data;
 949         /* gen. required number of descriptors and buffers */
 950         for (i = buf_len; i < bytes; i += buf_len) {
 951                 /* create or determine next desc. */
 952                 if (create_new_chain) {
 953
 954                         td = pci_pool_alloc(ep->dev->data_requests,
 955                                         gfp_flags, &dma_addr);
 956                         if (!td)
 957                                 return -ENOMEM;
 958
 959                         td->status = 0;
 960                 } else if (i == buf_len) {
 961                         /* first td */
 962                         td = (struct udc_data_dma *) phys_to_virt(
 963                                                 req->td_data->next);
 964                         td->status = 0;
 965                 } else {
 966                         td = (struct udc_data_dma *) phys_to_virt(last->next);
 967                         td->status = 0;
 968                 }
 969
 970
 971                 if (td)
 972                         td->bufptr = req->req.dma + i; /* assign buffer */
 973                 else
 974                         break;
 975
 976                 /* short packet ? */
 977                 if ((bytes - i) >= buf_len) {
 978                         txbytes = buf_len;
 979                 } else {
 980                         /* short packet */
 981                         txbytes = bytes - i;
 982                 }
 983
 984                 /* link td and assign tx bytes */
 985                 if (i == buf_len) {
 986                         if (create_new_chain)
 987                                 req->td_data->next = dma_addr;
 988                         /*
 989                         else
 990                                 req->td_data->next = virt_to_phys(td);
 991                         */
 992                         /* write tx bytes */
 993                         if (ep->in) {
 994                                 /* first desc */
 995                                 req->td_data->status =
 996                                         AMD_ADDBITS(req->td_data->status,
 997                                                         ep->ep.maxpacket,
 998                                                         UDC_DMA_IN_STS_TXBYTES);
 999                                 /* second desc */
1000                                 td->status = AMD_ADDBITS(td->status,
1001                                                         txbytes,
1002                                                         UDC_DMA_IN_STS_TXBYTES);
1003                         }
1004                 } else {
1005                         if (create_new_chain)
1006                                 last->next = dma_addr;
1007                         /*
1008                         else
1009                                 last->next = virt_to_phys(td);
1010                         */
1011                         if (ep->in) {
1012                                 /* write tx bytes */
1013                                 td->status = AMD_ADDBITS(td->status,
1014                                                         txbytes,
1015                                                         UDC_DMA_IN_STS_TXBYTES);
1016                         }
1017                 }
1018                 last = td;
1019         }
1020         /* set last bit */
1021         if (td) {
1022                 td->status |= AMD_BIT(UDC_DMA_IN_STS_L);
1023                 /* last desc. points to itself */
1024                 req->td_data_last = td;
1025         }
1026
1027         return 0;
1028 }
1029
1030 /* Enabling RX DMA */
1031 static void udc_set_rde(struct udc *dev)
1032 {
1033         u32 tmp;
1034
1035         VDBG(dev, "udc_set_rde()\n");
1036         /* stop RDE timer */
1037         if (timer_pending(&udc_timer)) {
1038                 set_rde = 0;
1039                 mod_timer(&udc_timer, jiffies - 1);
1040         }
1041         /* set RDE */
1042         tmp = readl(&dev->regs->ctl);
1043         tmp |= AMD_BIT(UDC_DEVCTL_RDE);
1044         writel(tmp, &dev->regs->ctl);
1045 }
1046
1047 /* Queues a request packet, called by gadget driver */
1048 static int
1049 udc_queue(struct usb_ep *usbep, struct usb_request *usbreq, gfp_t gfp)
1050 {
1051         int                     retval = 0;
1052         u8                      open_rxfifo = 0;
1053         unsigned long           iflags;
1054         struct udc_ep           *ep;
1055         struct udc_request      *req;
1056         struct udc              *dev;
1057         u32                     tmp;
1058
1059         /* check the inputs */
1060         req = container_of(usbreq, struct udc_request, req);
1061
1062         if (!usbep || !usbreq || !usbreq->complete || !usbreq->buf
1063                         || !list_empty(&req->queue))
1064                 return -EINVAL;
1065
1066         ep = container_of(usbep, struct udc_ep, ep);
1067         if (!ep->ep.desc && (ep->num != 0 && ep->num != UDC_EP0OUT_IX))
1068                 return -EINVAL;
1069
1070         VDBG(ep->dev, "udc_queue(): ep%d-in=%d\n", ep->num, ep->in);
1071         dev = ep->dev;
1072
1073         if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
1074                 return -ESHUTDOWN;
1075
1076         /* map dma (usually done before) */
1077         if (ep->dma) {
1078                 VDBG(dev, "DMA map req %p\n", req);
1079                 retval = usb_gadget_map_request(&udc->gadget, usbreq, ep->in);
1080                 if (retval)
1081                         return retval;
1082         }
1083
1084         VDBG(dev, "%s queue req %p, len %d req->td_data=%p buf %p\n",
1085                         usbep->name, usbreq, usbreq->length,
1086                         req->td_data, usbreq->buf);
1087
1088         spin_lock_irqsave(&dev->lock, iflags);
1089         usbreq->actual = 0;
1090         usbreq->status = -EINPROGRESS;
1091         req->dma_done = 0;
1092
1093         /* on empty queue just do first transfer */
1094         if (list_empty(&ep->queue)) {
1095                 /* zlp */
1096                 if (usbreq->length == 0) {
1097                         /* IN zlp's are handled by hardware */
1098                         complete_req(ep, req, 0);
1099                         VDBG(dev, "%s: zlp\n", ep->ep.name);
1100                         /*
1101                          * if set_config or set_intf is waiting for ack by zlp
1102                          * then set CSR_DONE
1103                          */
1104                         if (dev->set_cfg_not_acked) {
1105                                 tmp = readl(&dev->regs->ctl);
1106                                 tmp |= AMD_BIT(UDC_DEVCTL_CSR_DONE);
1107                                 writel(tmp, &dev->regs->ctl);
1108                                 dev->set_cfg_not_acked = 0;
1109                         }
1110                         /* setup command is ACK'ed now by zlp */
1111                         if (dev->waiting_zlp_ack_ep0in) {
1112                                 /* clear NAK by writing CNAK in EP0_IN */
1113                                 tmp = readl(&dev->ep[UDC_EP0IN_IX].regs->ctl);
1114                                 tmp |= AMD_BIT(UDC_EPCTL_CNAK);
1115                                 writel(tmp, &dev->ep[UDC_EP0IN_IX].regs->ctl);
1116                                 dev->ep[UDC_EP0IN_IX].naking = 0;
1117                                 UDC_QUEUE_CNAK(&dev->ep[UDC_EP0IN_IX],
1118                                                         UDC_EP0IN_IX);
1119                                 dev->waiting_zlp_ack_ep0in = 0;
1120                         }
1121                         goto finished;
1122                 }
1123                 if (ep->dma) {
1124                         retval = prep_dma(ep, req, GFP_ATOMIC);
1125                         if (retval != 0)
1126                                 goto finished;
1127                         /* write desc pointer to enable DMA */
1128                         if (ep->in) {
1129                                 /* set HOST READY */
1130                                 req->td_data->status =
1131                                         AMD_ADDBITS(req->td_data->status,
1132                                                 UDC_DMA_IN_STS_BS_HOST_READY,
1133                                                 UDC_DMA_IN_STS_BS);
1134                         }
1135
1136                         /* disabled rx dma while descriptor update */
1137                         if (!ep->in) {
1138                                 /* stop RDE timer */
1139                                 if (timer_pending(&udc_timer)) {
1140                                         set_rde = 0;
1141                                         mod_timer(&udc_timer, jiffies - 1);
1142                                 }
1143                                 /* clear RDE */
1144                                 tmp = readl(&dev->regs->ctl);
1145                                 tmp &= AMD_UNMASK_BIT(UDC_DEVCTL_RDE);
1146                                 writel(tmp, &dev->regs->ctl);
1147                                 open_rxfifo = 1;
1148
1149                                 /*
1150                                  * if BNA occurred then let BNA dummy desc.
1151                                  * point to current desc.
1152                                  */
1153                                 if (ep->bna_occurred) {
1154                                         VDBG(dev, "copy to BNA dummy desc.\n");
1155                                         memcpy(ep->bna_dummy_req->td_data,
1156                                                 req->td_data,
1157                                                 sizeof(struct udc_data_dma));
1158                                 }
1159                         }
1160                         /* write desc pointer */
1161                         writel(req->td_phys, &ep->regs->desptr);
1162
1163                         /* clear NAK by writing CNAK */
1164                         if (ep->naking) {
1165                                 tmp = readl(&ep->regs->ctl);
1166                                 tmp |= AMD_BIT(UDC_EPCTL_CNAK);
1167                                 writel(tmp, &ep->regs->ctl);
1168                                 ep->naking = 0;
1169                                 UDC_QUEUE_CNAK(ep, ep->num);
1170                         }
1171
1172                         if (ep->in) {
1173                                 /* enable ep irq */
1174                                 tmp = readl(&dev->regs->ep_irqmsk);
1175                                 tmp &= AMD_UNMASK_BIT(ep->num);
1176                                 writel(tmp, &dev->regs->ep_irqmsk);
1177                         }
1178                 } else if (ep->in) {
1179                                 /* enable ep irq */
1180                                 tmp = readl(&dev->regs->ep_irqmsk);
1181                                 tmp &= AMD_UNMASK_BIT(ep->num);
1182                                 writel(tmp, &dev->regs->ep_irqmsk);
1183                         }
1184
1185         } else if (ep->dma) {
1186
1187                 /*
1188                  * prep_dma not used for OUT ep's, this is not possible
1189                  * for PPB modes, because of chain creation reasons
1190                  */
1191                 if (ep->in) {
1192                         retval = prep_dma(ep, req, GFP_ATOMIC);
1193                         if (retval != 0)
1194                                 goto finished;
1195                 }
1196         }
1197         VDBG(dev, "list_add\n");
1198         /* add request to ep queue */
1199         if (req) {
1200
1201                 list_add_tail(&req->queue, &ep->queue);
1202
1203                 /* open rxfifo if out data queued */
1204                 if (open_rxfifo) {
1205                         /* enable DMA */
1206                         req->dma_going = 1;
1207                         udc_set_rde(dev);
1208                         if (ep->num != UDC_EP0OUT_IX)
1209                                 dev->data_ep_queued = 1;
1210                 }
1211                 /* stop OUT naking */
1212                 if (!ep->in) {
1213                         if (!use_dma && udc_rxfifo_pending) {
1214                                 DBG(dev, "udc_queue(): pending bytes in "
1215                                         "rxfifo after nyet\n");
1216                                 /*
1217                                  * read pending bytes afer nyet:
1218                                  * referring to isr
1219                                  */
1220                                 if (udc_rxfifo_read(ep, req)) {
1221                                         /* finish */
1222                                         complete_req(ep, req, 0);
1223                                 }
1224                                 udc_rxfifo_pending = 0;
1225
1226                         }
1227                 }
1228         }
1229
1230 finished:
1231         spin_unlock_irqrestore(&dev->lock, iflags);
1232         return retval;
1233 }
1234
1235 /* Empty request queue of an endpoint; caller holds spinlock */
1236 static void empty_req_queue(struct udc_ep *ep)
1237 {
1238         struct udc_request      *req;
1239
1240         ep->halted = 1;
1241         while (!list_empty(&ep->queue)) {
1242                 req = list_entry(ep->queue.next,
1243                         struct udc_request,
1244                         queue);
1245                 complete_req(ep, req, -ESHUTDOWN);
1246         }
1247 }
1248
1249 /* Dequeues a request packet, called by gadget driver */
1250 static int udc_dequeue(struct usb_ep *usbep, struct usb_request *usbreq)
1251 {
1252         struct udc_ep           *ep;
1253         struct udc_request      *req;
1254         unsigned                halted;
1255         unsigned long           iflags;
1256
1257         ep = container_of(usbep, struct udc_ep, ep);
1258         if (!usbep || !usbreq || (!ep->ep.desc && (ep->num != 0
1259                                 && ep->num != UDC_EP0OUT_IX)))
1260                 return -EINVAL;
1261
1262         req = container_of(usbreq, struct udc_request, req);
1263
1264         spin_lock_irqsave(&ep->dev->lock, iflags);
1265         halted = ep->halted;
1266         ep->halted = 1;
1267         /* request in processing or next one */
1268         if (ep->queue.next == &req->queue) {
1269                 if (ep->dma && req->dma_going) {
1270                         if (ep->in)
1271                                 ep->cancel_transfer = 1;
1272                         else {
1273                                 u32 tmp;
1274                                 u32 dma_sts;
1275                                 /* stop potential receive DMA */
1276                                 tmp = readl(&udc->regs->ctl);
1277                                 writel(tmp & AMD_UNMASK_BIT(UDC_DEVCTL_RDE),
1278                                                         &udc->regs->ctl);
1279                                 /*
1280                                  * Cancel transfer later in ISR
1281                                  * if descriptor was touched.
1282                                  */
1283                                 dma_sts = AMD_GETBITS(req->td_data->status,
1284                                                         UDC_DMA_OUT_STS_BS);
1285                                 if (dma_sts != UDC_DMA_OUT_STS_BS_HOST_READY)
1286                                         ep->cancel_transfer = 1;
1287                                 else {
1288                                         udc_init_bna_dummy(ep->req);
1289                                         writel(ep->bna_dummy_req->td_phys,
1290                                                 &ep->regs->desptr);
1291                                 }
1292                                 writel(tmp, &udc->regs->ctl);
1293                         }
1294                 }
1295         }
1296         complete_req(ep, req, -ECONNRESET);
1297         ep->halted = halted;
1298
1299         spin_unlock_irqrestore(&ep->dev->lock, iflags);
1300         return 0;
1301 }
1302
1303 /* Halt or clear halt of endpoint */
1304 static int
1305 udc_set_halt(struct usb_ep *usbep, int halt)
1306 {
1307         struct udc_ep   *ep;
1308         u32 tmp;
1309         unsigned long iflags;
1310         int retval = 0;
1311
1312         if (!usbep)
1313                 return -EINVAL;
1314
1315         pr_debug("set_halt %s: halt=%d\n", usbep->name, halt);
1316
1317         ep = container_of(usbep, struct udc_ep, ep);
1318         if (!ep->ep.desc && (ep->num != 0 && ep->num != UDC_EP0OUT_IX))
1319                 return -EINVAL;
1320         if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN)
1321                 return -ESHUTDOWN;
1322
1323         spin_lock_irqsave(&udc_stall_spinlock, iflags);
1324         /* halt or clear halt */
1325         if (halt) {
1326                 if (ep->num == 0)
1327                         ep->dev->stall_ep0in = 1;
1328                 else {
1329                         /*
1330                          * set STALL
1331                          * rxfifo empty not taken into acount
1332                          */
1333                         tmp = readl(&ep->regs->ctl);
1334                         tmp |= AMD_BIT(UDC_EPCTL_S);
1335                         writel(tmp, &ep->regs->ctl);
1336                         ep->halted = 1;
1337
1338                         /* setup poll timer */
1339                         if (!timer_pending(&udc_pollstall_timer)) {
1340                                 udc_pollstall_timer.expires = jiffies +
1341                                         HZ * UDC_POLLSTALL_TIMER_USECONDS
1342                                         / (1000 * 1000);
1343                                 if (!stop_pollstall_timer) {
1344                                         DBG(ep->dev, "start polltimer\n");
1345                                         add_timer(&udc_pollstall_timer);
1346                                 }
1347                         }
1348                 }
1349         } else {
1350                 /* ep is halted by set_halt() before */
1351                 if (ep->halted) {
1352                         tmp = readl(&ep->regs->ctl);
1353                         /* clear stall bit */
1354                         tmp = tmp & AMD_CLEAR_BIT(UDC_EPCTL_S);
1355                         /* clear NAK by writing CNAK */
1356                         tmp |= AMD_BIT(UDC_EPCTL_CNAK);
1357                         writel(tmp, &ep->regs->ctl);
1358                         ep->halted = 0;
1359                         UDC_QUEUE_CNAK(ep, ep->num);
1360                 }
1361         }
1362         spin_unlock_irqrestore(&udc_stall_spinlock, iflags);
1363         return retval;
1364 }
1365
1366 /* gadget interface */
1367 static const struct usb_ep_ops udc_ep_ops = {
1368         .enable         = udc_ep_enable,
1369         .disable        = udc_ep_disable,
1370
1371         .alloc_request  = udc_alloc_request,
1372         .free_request   = udc_free_request,
1373
1374         .queue          = udc_queue,
1375         .dequeue        = udc_dequeue,
1376
1377         .set_halt       = udc_set_halt,
1378         /* fifo ops not implemented */
1379 };
1380
1381 /*-------------------------------------------------------------------------*/
1382
1383 /* Get frame counter (not implemented) */
1384 static int udc_get_frame(struct usb_gadget *gadget)
1385 {
1386         return -EOPNOTSUPP;
1387 }
1388
1389 /* Remote wakeup gadget interface */
1390 static int udc_wakeup(struct usb_gadget *gadget)
1391 {
1392         struct udc              *dev;
1393
1394         if (!gadget)
1395                 return -EINVAL;
1396         dev = container_of(gadget, struct udc, gadget);
1397         udc_remote_wakeup(dev);
1398
1399         return 0;
1400 }
1401
1402 static int amd5536_udc_start(struct usb_gadget *g,
1403                 struct usb_gadget_driver *driver);
1404 static int amd5536_udc_stop(struct usb_gadget *g);
1405
1406 static const struct usb_gadget_ops udc_ops = {
1407         .wakeup         = udc_wakeup,
1408         .get_frame      = udc_get_frame,
1409         .udc_start      = amd5536_udc_start,
1410         .udc_stop       = amd5536_udc_stop,
1411 };
1412
1413 /* Setups endpoint parameters, adds endpoints to linked list */
1414 static void make_ep_lists(struct udc *dev)
1415 {
1416         /* make gadget ep lists */
1417         INIT_LIST_HEAD(&dev->gadget.ep_list);
1418         list_add_tail(&dev->ep[UDC_EPIN_STATUS_IX].ep.ep_list,
1419                                                 &dev->gadget.ep_list);
1420         list_add_tail(&dev->ep[UDC_EPIN_IX].ep.ep_list,
1421                                                 &dev->gadget.ep_list);
1422         list_add_tail(&dev->ep[UDC_EPOUT_IX].ep.ep_list,
1423                                                 &dev->gadget.ep_list);
1424
1425         /* fifo config */
1426         dev->ep[UDC_EPIN_STATUS_IX].fifo_depth = UDC_EPIN_SMALLINT_BUFF_SIZE;
1427         if (dev->gadget.speed == USB_SPEED_FULL)
1428                 dev->ep[UDC_EPIN_IX].fifo_depth = UDC_FS_EPIN_BUFF_SIZE;
1429         else if (dev->gadget.speed == USB_SPEED_HIGH)
1430                 dev->ep[UDC_EPIN_IX].fifo_depth = hs_tx_buf;
1431         dev->ep[UDC_EPOUT_IX].fifo_depth = UDC_RXFIFO_SIZE;
1432 }
1433
1434 /* init registers at driver load time */
1435 static int startup_registers(struct udc *dev)
1436 {
1437         u32 tmp;
1438
1439         /* init controller by soft reset */
1440         udc_soft_reset(dev);
1441
1442         /* mask not needed interrupts */
1443         udc_mask_unused_interrupts(dev);
1444
1445         /* put into initial config */
1446         udc_basic_init(dev);
1447         /* link up all endpoints */
1448         udc_setup_endpoints(dev);
1449
1450         /* program speed */
1451         tmp = readl(&dev->regs->cfg);
1452         if (use_fullspeed)
1453                 tmp = AMD_ADDBITS(tmp, UDC_DEVCFG_SPD_FS, UDC_DEVCFG_SPD);
1454         else
1455                 tmp = AMD_ADDBITS(tmp, UDC_DEVCFG_SPD_HS, UDC_DEVCFG_SPD);
1456         writel(tmp, &dev->regs->cfg);
1457
1458         return 0;
1459 }
1460
1461 /* Inits UDC context */
1462 static void udc_basic_init(struct udc *dev)
1463 {
1464         u32     tmp;
1465
1466         DBG(dev, "udc_basic_init()\n");
1467
1468         dev->gadget.speed = USB_SPEED_UNKNOWN;
1469
1470         /* stop RDE timer */
1471         if (timer_pending(&udc_timer)) {
1472                 set_rde = 0;
1473                 mod_timer(&udc_timer, jiffies - 1);
1474         }
1475         /* stop poll stall timer */
1476         if (timer_pending(&udc_pollstall_timer))
1477                 mod_timer(&udc_pollstall_timer, jiffies - 1);
1478         /* disable DMA */
1479         tmp = readl(&dev->regs->ctl);
1480         tmp &= AMD_UNMASK_BIT(UDC_DEVCTL_RDE);
1481         tmp &= AMD_UNMASK_BIT(UDC_DEVCTL_TDE);
1482         writel(tmp, &dev->regs->ctl);
1483
1484         /* enable dynamic CSR programming */
1485         tmp = readl(&dev->regs->cfg);
1486         tmp |= AMD_BIT(UDC_DEVCFG_CSR_PRG);
1487         /* set self powered */
1488         tmp |= AMD_BIT(UDC_DEVCFG_SP);
1489         /* set remote wakeupable */
1490         tmp |= AMD_BIT(UDC_DEVCFG_RWKP);
1491         writel(tmp, &dev->regs->cfg);
1492
1493         make_ep_lists(dev);
1494
1495         dev->data_ep_enabled = 0;
1496         dev->data_ep_queued = 0;
1497 }
1498
1499 /* Sets initial endpoint parameters */
1500 static void udc_setup_endpoints(struct udc *dev)
1501 {
1502         struct udc_ep   *ep;
1503         u32     tmp;
1504         u32     reg;
1505
1506         DBG(dev, "udc_setup_endpoints()\n");
1507
1508         /* read enum speed */
1509         tmp = readl(&dev->regs->sts);
1510         tmp = AMD_GETBITS(tmp, UDC_DEVSTS_ENUM_SPEED);
1511         if (tmp == UDC_DEVSTS_ENUM_SPEED_HIGH)
1512                 dev->gadget.speed = USB_SPEED_HIGH;
1513         else if (tmp == UDC_DEVSTS_ENUM_SPEED_FULL)
1514                 dev->gadget.speed = USB_SPEED_FULL;
1515
1516         /* set basic ep parameters */
1517         for (tmp = 0; tmp < UDC_EP_NUM; tmp++) {
1518                 ep = &dev->ep[tmp];
1519                 ep->dev = dev;
1520                 ep->ep.name = ep_string[tmp];
1521                 ep->num = tmp;
1522                 /* txfifo size is calculated at enable time */
1523                 ep->txfifo = dev->txfifo;
1524
1525                 /* fifo size */
1526                 if (tmp < UDC_EPIN_NUM) {
1527                         ep->fifo_depth = UDC_TXFIFO_SIZE;
1528                         ep->in = 1;
1529                 } else {
1530                         ep->fifo_depth = UDC_RXFIFO_SIZE;
1531                         ep->in = 0;
1532
1533                 }
1534                 ep->regs = &dev->ep_regs[tmp];
1535                 /*
1536                  * ep will be reset only if ep was not enabled before to avoid
1537                  * disabling ep interrupts when ENUM interrupt occurs but ep is
1538                  * not enabled by gadget driver
1539                  */
1540                 if (!ep->ep.desc)
1541                         ep_init(dev->regs, ep);
1542
1543                 if (use_dma) {
1544                         /*
1545                          * ep->dma is not really used, just to indicate that
1546                          * DMA is active: remove this
1547                          * dma regs = dev control regs
1548                          */
1549                         ep->dma = &dev->regs->ctl;
1550
1551                         /* nak OUT endpoints until enable - not for ep0 */
1552                         if (tmp != UDC_EP0IN_IX && tmp != UDC_EP0OUT_IX
1553                                                 && tmp > UDC_EPIN_NUM) {
1554                                 /* set NAK */
1555                                 reg = readl(&dev->ep[tmp].regs->ctl);
1556                                 reg |= AMD_BIT(UDC_EPCTL_SNAK);
1557                                 writel(reg, &dev->ep[tmp].regs->ctl);
1558                                 dev->ep[tmp].naking = 1;
1559
1560                         }
1561                 }
1562         }
1563         /* EP0 max packet */
1564         if (dev->gadget.speed == USB_SPEED_FULL) {
1565                 usb_ep_set_maxpacket_limit(&dev->ep[UDC_EP0IN_IX].ep,
1566                                            UDC_FS_EP0IN_MAX_PKT_SIZE);
1567                 usb_ep_set_maxpacket_limit(&dev->ep[UDC_EP0OUT_IX].ep,
1568                                            UDC_FS_EP0OUT_MAX_PKT_SIZE);
1569         } else if (dev->gadget.speed == USB_SPEED_HIGH) {
1570                 usb_ep_set_maxpacket_limit(&dev->ep[UDC_EP0IN_IX].ep,
1571                                            UDC_EP0IN_MAX_PKT_SIZE);
1572                 usb_ep_set_maxpacket_limit(&dev->ep[UDC_EP0OUT_IX].ep,
1573                                            UDC_EP0OUT_MAX_PKT_SIZE);
1574         }
1575
1576         /*
1577          * with suspend bug workaround, ep0 params for gadget driver
1578          * are set at gadget driver bind() call
1579          */
1580         dev->gadget.ep0 = &dev->ep[UDC_EP0IN_IX].ep;
1581         dev->ep[UDC_EP0IN_IX].halted = 0;
1582         INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
1583
1584         /* init cfg/alt/int */
1585         dev->cur_config = 0;
1586         dev->cur_intf = 0;
1587         dev->cur_alt = 0;
1588 }
1589
1590 /* Bringup after Connect event, initial bringup to be ready for ep0 events */
1591 static void usb_connect(struct udc *dev)
1592 {
1593
1594         dev_info(&dev->pdev->dev, "USB Connect\n");
1595
1596         dev->connected = 1;
1597
1598         /* put into initial config */
1599         udc_basic_init(dev);
1600
1601         /* enable device setup interrupts */
1602         udc_enable_dev_setup_interrupts(dev);
1603 }
1604
1605 /*
1606  * Calls gadget with disconnect event and resets the UDC and makes
1607  * initial bringup to be ready for ep0 events
1608  */
1609 static void usb_disconnect(struct udc *dev)
1610 {
1611
1612         dev_info(&dev->pdev->dev, "USB Disconnect\n");
1613
1614         dev->connected = 0;
1615
1616         /* mask interrupts */
1617         udc_mask_unused_interrupts(dev);
1618
1619         /* REVISIT there doesn't seem to be a point to having this
1620          * talk to a tasklet ... do it directly, we already hold
1621          * the spinlock needed to process the disconnect.
1622          */
1623
1624         tasklet_schedule(&disconnect_tasklet);
1625 }
1626
1627 /* Tasklet for disconnect to be outside of interrupt context */
1628 static void udc_tasklet_disconnect(unsigned long par)
1629 {
1630         struct udc *dev = (struct udc *)(*((struct udc **) par));
1631         u32 tmp;
1632
1633         DBG(dev, "Tasklet disconnect\n");
1634         spin_lock_irq(&dev->lock);
1635
1636         if (dev->driver) {
1637                 spin_unlock(&dev->lock);
1638                 dev->driver->disconnect(&dev->gadget);
1639                 spin_lock(&dev->lock);
1640
1641                 /* empty queues */
1642                 for (tmp = 0; tmp < UDC_EP_NUM; tmp++)
1643                         empty_req_queue(&dev->ep[tmp]);
1644
1645         }
1646
1647         /* disable ep0 */
1648         ep_init(dev->regs,
1649                         &dev->ep[UDC_EP0IN_IX]);
1650
1651
1652         if (!soft_reset_occured) {
1653                 /* init controller by soft reset */
1654                 udc_soft_reset(dev);
1655                 soft_reset_occured++;
1656         }
1657
1658         /* re-enable dev interrupts */
1659         udc_enable_dev_setup_interrupts(dev);
1660         /* back to full speed ? */
1661         if (use_fullspeed) {
1662                 tmp = readl(&dev->regs->cfg);
1663                 tmp = AMD_ADDBITS(tmp, UDC_DEVCFG_SPD_FS, UDC_DEVCFG_SPD);
1664                 writel(tmp, &dev->regs->cfg);
1665         }
1666
1667         spin_unlock_irq(&dev->lock);
1668 }
1669
1670 /* Reset the UDC core */
1671 static void udc_soft_reset(struct udc *dev)
1672 {
1673         unsigned long   flags;
1674
1675         DBG(dev, "Soft reset\n");
1676         /*
1677          * reset possible waiting interrupts, because int.
1678          * status is lost after soft reset,
1679          * ep int. status reset
1680          */
1681         writel(UDC_EPINT_MSK_DISABLE_ALL, &dev->regs->ep_irqsts);
1682         /* device int. status reset */
1683         writel(UDC_DEV_MSK_DISABLE, &dev->regs->irqsts);
1684
1685         spin_lock_irqsave(&udc_irq_spinlock, flags);
1686         writel(AMD_BIT(UDC_DEVCFG_SOFTRESET), &dev->regs->cfg);
1687         readl(&dev->regs->cfg);
1688         spin_unlock_irqrestore(&udc_irq_spinlock, flags);
1689
1690 }
1691
1692 /* RDE timer callback to set RDE bit */
1693 static void udc_timer_function(unsigned long v)
1694 {
1695         u32 tmp;
1696
1697         spin_lock_irq(&udc_irq_spinlock);
1698
1699         if (set_rde > 0) {
1700                 /*
1701                  * open the fifo if fifo was filled on last timer call
1702                  * conditionally
1703                  */
1704                 if (set_rde > 1) {
1705                         /* set RDE to receive setup data */
1706                         tmp = readl(&udc->regs->ctl);
1707                         tmp |= AMD_BIT(UDC_DEVCTL_RDE);
1708                         writel(tmp, &udc->regs->ctl);
1709                         set_rde = -1;
1710                 } else if (readl(&udc->regs->sts)
1711                                 & AMD_BIT(UDC_DEVSTS_RXFIFO_EMPTY)) {
1712                         /*
1713                          * if fifo empty setup polling, do not just
1714                          * open the fifo
1715                          */
1716                         udc_timer.expires = jiffies + HZ/UDC_RDE_TIMER_DIV;
1717                         if (!stop_timer)
1718                                 add_timer(&udc_timer);
1719                 } else {
1720                         /*
1721                          * fifo contains data now, setup timer for opening
1722                          * the fifo when timer expires to be able to receive
1723                          * setup packets, when data packets gets queued by
1724                          * gadget layer then timer will forced to expire with
1725                          * set_rde=0 (RDE is set in udc_queue())
1726                          */
1727                         set_rde++;
1728                         /* debug: lhadmot_timer_start = 221070 */
1729                         udc_timer.expires = jiffies + HZ*UDC_RDE_TIMER_SECONDS;
1730                         if (!stop_timer)
1731                                 add_timer(&udc_timer);
1732                 }
1733
1734         } else
1735                 set_rde = -1; /* RDE was set by udc_queue() */
1736         spin_unlock_irq(&udc_irq_spinlock);
1737         if (stop_timer)
1738                 complete(&on_exit);
1739
1740 }
1741
1742 /* Handle halt state, used in stall poll timer */
1743 static void udc_handle_halt_state(struct udc_ep *ep)
1744 {
1745         u32 tmp;
1746         /* set stall as long not halted */
1747         if (ep->halted == 1) {
1748                 tmp = readl(&ep->regs->ctl);
1749                 /* STALL cleared ? */
1750                 if (!(tmp & AMD_BIT(UDC_EPCTL_S))) {
1751                         /*
1752                          * FIXME: MSC spec requires that stall remains
1753                          * even on receivng of CLEAR_FEATURE HALT. So
1754                          * we would set STALL again here to be compliant.
1755                          * But with current mass storage drivers this does
1756                          * not work (would produce endless host retries).
1757                          * So we clear halt on CLEAR_FEATURE.
1758                          *
1759                         DBG(ep->dev, "ep %d: set STALL again\n", ep->num);
1760                         tmp |= AMD_BIT(UDC_EPCTL_S);
1761                         writel(tmp, &ep->regs->ctl);*/
1762
1763                         /* clear NAK by writing CNAK */
1764                         tmp |= AMD_BIT(UDC_EPCTL_CNAK);
1765                         writel(tmp, &ep->regs->ctl);
1766                         ep->halted = 0;
1767                         UDC_QUEUE_CNAK(ep, ep->num);
1768                 }
1769         }
1770 }
1771
1772 /* Stall timer callback to poll S bit and set it again after */
1773 static void udc_pollstall_timer_function(unsigned long v)
1774 {
1775         struct udc_ep *ep;
1776         int halted = 0;
1777
1778         spin_lock_irq(&udc_stall_spinlock);
1779         /*
1780          * only one IN and OUT endpoints are handled
1781          * IN poll stall
1782          */
1783         ep = &udc->ep[UDC_EPIN_IX];
1784         udc_handle_halt_state(ep);
1785         if (ep->halted)
1786                 halted = 1;
1787         /* OUT poll stall */
1788         ep = &udc->ep[UDC_EPOUT_IX];
1789         udc_handle_halt_state(ep);
1790         if (ep->halted)
1791                 halted = 1;
1792
1793         /* setup timer again when still halted */
1794         if (!stop_pollstall_timer && halted) {
1795                 udc_pollstall_timer.expires = jiffies +
1796                                         HZ * UDC_POLLSTALL_TIMER_USECONDS
1797                                         / (1000 * 1000);
1798                 add_timer(&udc_pollstall_timer);
1799         }
1800         spin_unlock_irq(&udc_stall_spinlock);
1801
1802         if (stop_pollstall_timer)
1803                 complete(&on_pollstall_exit);
1804 }
1805
1806 /* Inits endpoint 0 so that SETUP packets are processed */
1807 static void activate_control_endpoints(struct udc *dev)
1808 {
1809         u32 tmp;
1810
1811         DBG(dev, "activate_control_endpoints\n");
1812
1813         /* flush fifo */
1814         tmp = readl(&dev->ep[UDC_EP0IN_IX].regs->ctl);
1815         tmp |= AMD_BIT(UDC_EPCTL_F);
1816         writel(tmp, &dev->ep[UDC_EP0IN_IX].regs->ctl);
1817
1818         /* set ep0 directions */
1819         dev->ep[UDC_EP0IN_IX].in = 1;
1820         dev->ep[UDC_EP0OUT_IX].in = 0;
1821
1822         /* set buffer size (tx fifo entries) of EP0_IN */
1823         tmp = readl(&dev->ep[UDC_EP0IN_IX].regs->bufin_framenum);
1824         if (dev->gadget.speed == USB_SPEED_FULL)
1825                 tmp = AMD_ADDBITS(tmp, UDC_FS_EPIN0_BUFF_SIZE,
1826                                         UDC_EPIN_BUFF_SIZE);
1827         else if (dev->gadget.speed == USB_SPEED_HIGH)
1828                 tmp = AMD_ADDBITS(tmp, UDC_EPIN0_BUFF_SIZE,
1829                                         UDC_EPIN_BUFF_SIZE);
1830         writel(tmp, &dev->ep[UDC_EP0IN_IX].regs->bufin_framenum);
1831
1832         /* set max packet size of EP0_IN */
1833         tmp = readl(&dev->ep[UDC_EP0IN_IX].regs->bufout_maxpkt);
1834         if (dev->gadget.speed == USB_SPEED_FULL)
1835                 tmp = AMD_ADDBITS(tmp, UDC_FS_EP0IN_MAX_PKT_SIZE,
1836                                         UDC_EP_MAX_PKT_SIZE);
1837         else if (dev->gadget.speed == USB_SPEED_HIGH)
1838                 tmp = AMD_ADDBITS(tmp, UDC_EP0IN_MAX_PKT_SIZE,
1839                                 UDC_EP_MAX_PKT_SIZE);
1840         writel(tmp, &dev->ep[UDC_EP0IN_IX].regs->bufout_maxpkt);
1841
1842         /* set max packet size of EP0_OUT */
1843         tmp = readl(&dev->ep[UDC_EP0OUT_IX].regs->bufout_maxpkt);
1844         if (dev->gadget.speed == USB_SPEED_FULL)
1845                 tmp = AMD_ADDBITS(tmp, UDC_FS_EP0OUT_MAX_PKT_SIZE,
1846                                         UDC_EP_MAX_PKT_SIZE);
1847         else if (dev->gadget.speed == USB_SPEED_HIGH)
1848                 tmp = AMD_ADDBITS(tmp, UDC_EP0OUT_MAX_PKT_SIZE,
1849                                         UDC_EP_MAX_PKT_SIZE);
1850         writel(tmp, &dev->ep[UDC_EP0OUT_IX].regs->bufout_maxpkt);
1851
1852         /* set max packet size of EP0 in UDC CSR */
1853         tmp = readl(&dev->csr->ne[0]);
1854         if (dev->gadget.speed == USB_SPEED_FULL)
1855                 tmp = AMD_ADDBITS(tmp, UDC_FS_EP0OUT_MAX_PKT_SIZE,
1856                                         UDC_CSR_NE_MAX_PKT);
1857         else if (dev->gadget.speed == USB_SPEED_HIGH)
1858                 tmp = AMD_ADDBITS(tmp, UDC_EP0OUT_MAX_PKT_SIZE,
1859                                         UDC_CSR_NE_MAX_PKT);
1860         writel(tmp, &dev->csr->ne[0]);
1861
1862         if (use_dma) {
1863                 dev->ep[UDC_EP0OUT_IX].td->status |=
1864                         AMD_BIT(UDC_DMA_OUT_STS_L);
1865                 /* write dma desc address */
1866                 writel(dev->ep[UDC_EP0OUT_IX].td_stp_dma,
1867                         &dev->ep[UDC_EP0OUT_IX].regs->subptr);
1868                 writel(dev->ep[UDC_EP0OUT_IX].td_phys,
1869                         &dev->ep[UDC_EP0OUT_IX].regs->desptr);
1870                 /* stop RDE timer */
1871                 if (timer_pending(&udc_timer)) {
1872                         set_rde = 0;
1873                         mod_timer(&udc_timer, jiffies - 1);
1874                 }
1875                 /* stop pollstall timer */
1876                 if (timer_pending(&udc_pollstall_timer))
1877                         mod_timer(&udc_pollstall_timer, jiffies - 1);
1878                 /* enable DMA */
1879                 tmp = readl(&dev->regs->ctl);
1880                 tmp |= AMD_BIT(UDC_DEVCTL_MODE)
1881                                 | AMD_BIT(UDC_DEVCTL_RDE)
1882                                 | AMD_BIT(UDC_DEVCTL_TDE);
1883                 if (use_dma_bufferfill_mode)
1884                         tmp |= AMD_BIT(UDC_DEVCTL_BF);
1885                 else if (use_dma_ppb_du)
1886                         tmp |= AMD_BIT(UDC_DEVCTL_DU);
1887                 writel(tmp, &dev->regs->ctl);
1888         }
1889
1890         /* clear NAK by writing CNAK for EP0IN */
1891         tmp = readl(&dev->ep[UDC_EP0IN_IX].regs->ctl);
1892         tmp |= AMD_BIT(UDC_EPCTL_CNAK);
1893         writel(tmp, &dev->ep[UDC_EP0IN_IX].regs->ctl);
1894         dev->ep[UDC_EP0IN_IX].naking = 0;
1895         UDC_QUEUE_CNAK(&dev->ep[UDC_EP0IN_IX], UDC_EP0IN_IX);
1896
1897         /* clear NAK by writing CNAK for EP0OUT */
1898         tmp = readl(&dev->ep[UDC_EP0OUT_IX].regs->ctl);
1899         tmp |= AMD_BIT(UDC_EPCTL_CNAK);
1900         writel(tmp, &dev->ep[UDC_EP0OUT_IX].regs->ctl);
1901         dev->ep[UDC_EP0OUT_IX].naking = 0;
1902         UDC_QUEUE_CNAK(&dev->ep[UDC_EP0OUT_IX], UDC_EP0OUT_IX);
1903 }
1904
1905 /* Make endpoint 0 ready for control traffic */
1906 static int setup_ep0(struct udc *dev)
1907 {
1908         activate_control_endpoints(dev);
1909         /* enable ep0 interrupts */
1910         udc_enable_ep0_interrupts(dev);
1911         /* enable device setup interrupts */
1912         udc_enable_dev_setup_interrupts(dev);
1913
1914         return 0;
1915 }
1916
1917 /* Called by gadget driver to register itself */
1918 static int amd5536_udc_start(struct usb_gadget *g,
1919                 struct usb_gadget_driver *driver)
1920 {
1921         struct udc *dev = to_amd5536_udc(g);
1922         u32 tmp;
1923
1924         driver->driver.bus = NULL;
1925         dev->driver = driver;
1926
1927         /* Some gadget drivers use both ep0 directions.
1928          * NOTE: to gadget driver, ep0 is just one endpoint...
1929          */
1930         dev->ep[UDC_EP0OUT_IX].ep.driver_data =
1931                 dev->ep[UDC_EP0IN_IX].ep.driver_data;
1932
1933         /* get ready for ep0 traffic */
1934         setup_ep0(dev);
1935
1936         /* clear SD */
1937         tmp = readl(&dev->regs->ctl);
1938         tmp = tmp & AMD_CLEAR_BIT(UDC_DEVCTL_SD);
1939         writel(tmp, &dev->regs->ctl);
1940
1941         usb_connect(dev);
1942
1943         return 0;
1944 }
1945
1946 /* shutdown requests and disconnect from gadget */
1947 static void
1948 shutdown(struct udc *dev, struct usb_gadget_driver *driver)
1949 __releases(dev->lock)
1950 __acquires(dev->lock)
1951 {
1952         int tmp;
1953
1954         /* empty queues and init hardware */
1955         udc_basic_init(dev);
1956
1957         for (tmp = 0; tmp < UDC_EP_NUM; tmp++)
1958                 empty_req_queue(&dev->ep[tmp]);
1959
1960         udc_setup_endpoints(dev);
1961 }
1962
1963 /* Called by gadget driver to unregister itself */
1964 static int amd5536_udc_stop(struct usb_gadget *g)
1965 {
1966         struct udc *dev = to_amd5536_udc(g);
1967         unsigned long flags;
1968         u32 tmp;
1969
1970         spin_lock_irqsave(&dev->lock, flags);
1971         udc_mask_unused_interrupts(dev);
1972         shutdown(dev, NULL);
1973         spin_unlock_irqrestore(&dev->lock, flags);
1974
1975         dev->driver = NULL;
1976
1977         /* set SD */
1978         tmp = readl(&dev->regs->ctl);
1979         tmp |= AMD_BIT(UDC_DEVCTL_SD);
1980         writel(tmp, &dev->regs->ctl);
1981
1982         return 0;
1983 }
1984
1985 /* Clear pending NAK bits */
1986 static void udc_process_cnak_queue(struct udc *dev)
1987 {
1988         u32 tmp;
1989         u32 reg;
1990
1991         /* check epin's */
1992         DBG(dev, "CNAK pending queue processing\n");
1993         for (tmp = 0; tmp < UDC_EPIN_NUM_USED; tmp++) {
1994                 if (cnak_pending & (1 << tmp)) {
1995                         DBG(dev, "CNAK pending for ep%d\n", tmp);
1996                         /* clear NAK by writing CNAK */
1997                         reg = readl(&dev->ep[tmp].regs->ctl);
1998                         reg |= AMD_BIT(UDC_EPCTL_CNAK);
1999                         writel(reg, &dev->ep[tmp].regs->ctl);
2000                         dev->ep[tmp].naking = 0;
2001                         UDC_QUEUE_CNAK(&dev->ep[tmp], dev->ep[tmp].num);
2002                 }
2003         }
2004         /* ...  and ep0out */
2005         if (cnak_pending & (1 << UDC_EP0OUT_IX)) {
2006                 DBG(dev, "CNAK pending for ep%d\n", UDC_EP0OUT_IX);
2007                 /* clear NAK by writing CNAK */
2008                 reg = readl(&dev->ep[UDC_EP0OUT_IX].regs->ctl);
2009                 reg |= AMD_BIT(UDC_EPCTL_CNAK);
2010                 writel(reg, &dev->ep[UDC_EP0OUT_IX].regs->ctl);
2011                 dev->ep[UDC_EP0OUT_IX].naking = 0;
2012                 UDC_QUEUE_CNAK(&dev->ep[UDC_EP0OUT_IX],
2013                                 dev->ep[UDC_EP0OUT_IX].num);
2014         }
2015 }
2016
2017 /* Enabling RX DMA after setup packet */
2018 static void udc_ep0_set_rde(struct udc *dev)
2019 {
2020         if (use_dma) {
2021                 /*
2022                  * only enable RXDMA when no data endpoint enabled
2023                  * or data is queued
2024                  */
2025                 if (!dev->data_ep_enabled || dev->data_ep_queued) {
2026                         udc_set_rde(dev);
2027                 } else {
2028                         /*
2029                          * setup timer for enabling RDE (to not enable
2030                          * RXFIFO DMA for data endpoints to early)
2031                          */
2032                         if (set_rde != 0 && !timer_pending(&udc_timer)) {
2033                                 udc_timer.expires =
2034                                         jiffies + HZ/UDC_RDE_TIMER_DIV;
2035                                 set_rde = 1;
2036                                 if (!stop_timer)
2037                                         add_timer(&udc_timer);
2038                         }
2039                 }
2040         }
2041 }
2042
2043
2044 /* Interrupt handler for data OUT traffic */
2045 static irqreturn_t udc_data_out_isr(struct udc *dev, int ep_ix)
2046 {
2047         irqreturn_t             ret_val = IRQ_NONE;
2048         u32                     tmp;
2049         struct udc_ep           *ep;
2050         struct udc_request      *req;
2051         unsigned int            count;
2052         struct udc_data_dma     *td = NULL;
2053         unsigned                dma_done;
2054
2055         VDBG(dev, "ep%d irq\n", ep_ix);
2056         ep = &dev->ep[ep_ix];
2057
2058         tmp = readl(&ep->regs->sts);
2059         if (use_dma) {
2060                 /* BNA event ? */
2061                 if (tmp & AMD_BIT(UDC_EPSTS_BNA)) {
2062                         DBG(dev, "BNA ep%dout occurred - DESPTR = %x\n",
2063                                         ep->num, readl(&ep->regs->desptr));
2064                         /* clear BNA */
2065                         writel(tmp | AMD_BIT(UDC_EPSTS_BNA), &ep->regs->sts);
2066                         if (!ep->cancel_transfer)
2067                                 ep->bna_occurred = 1;
2068                         else
2069                                 ep->cancel_transfer = 0;
2070                         ret_val = IRQ_HANDLED;
2071                         goto finished;
2072                 }
2073         }
2074         /* HE event ? */
2075         if (tmp & AMD_BIT(UDC_EPSTS_HE)) {
2076                 dev_err(&dev->pdev->dev, "HE ep%dout occurred\n", ep->num);
2077
2078                 /* clear HE */
2079                 writel(tmp | AMD_BIT(UDC_EPSTS_HE), &ep->regs->sts);
2080                 ret_val = IRQ_HANDLED;
2081                 goto finished;
2082         }
2083
2084         if (!list_empty(&ep->queue)) {
2085
2086                 /* next request */
2087                 req = list_entry(ep->queue.next,
2088                         struct udc_request, queue);
2089         } else {
2090                 req = NULL;
2091                 udc_rxfifo_pending = 1;
2092         }
2093         VDBG(dev, "req = %p\n", req);
2094         /* fifo mode */
2095         if (!use_dma) {
2096
2097                 /* read fifo */
2098                 if (req && udc_rxfifo_read(ep, req)) {
2099                         ret_val = IRQ_HANDLED;
2100
2101                         /* finish */
2102                         complete_req(ep, req, 0);
2103                         /* next request */
2104                         if (!list_empty(&ep->queue) && !ep->halted) {
2105                                 req = list_entry(ep->queue.next,
2106                                         struct udc_request, queue);
2107                         } else
2108                                 req = NULL;
2109                 }
2110
2111         /* DMA */
2112         } else if (!ep->cancel_transfer && req != NULL) {
2113                 ret_val = IRQ_HANDLED;
2114
2115                 /* check for DMA done */
2116                 if (!use_dma_ppb) {
2117                         dma_done = AMD_GETBITS(req->td_data->status,
2118                                                 UDC_DMA_OUT_STS_BS);
2119                 /* packet per buffer mode - rx bytes */
2120                 } else {
2121                         /*
2122                          * if BNA occurred then recover desc. from
2123                          * BNA dummy desc.
2124                          */
2125                         if (ep->bna_occurred) {
2126                                 VDBG(dev, "Recover desc. from BNA dummy\n");
2127                                 memcpy(req->td_data, ep->bna_dummy_req->td_data,
2128                                                 sizeof(struct udc_data_dma));
2129                                 ep->bna_occurred = 0;
2130                                 udc_init_bna_dummy(ep->req);
2131                         }
2132                         td = udc_get_last_dma_desc(req);
2133                         dma_done = AMD_GETBITS(td->status, UDC_DMA_OUT_STS_BS);
2134                 }
2135                 if (dma_done == UDC_DMA_OUT_STS_BS_DMA_DONE) {
2136                         /* buffer fill mode - rx bytes */
2137                         if (!use_dma_ppb) {
2138                                 /* received number bytes */
2139                                 count = AMD_GETBITS(req->td_data->status,
2140                                                 UDC_DMA_OUT_STS_RXBYTES);
2141                                 VDBG(dev, "rx bytes=%u\n", count);
2142                         /* packet per buffer mode - rx bytes */
2143                         } else {
2144                                 VDBG(dev, "req->td_data=%p\n", req->td_data);
2145                                 VDBG(dev, "last desc = %p\n", td);
2146                                 /* received number bytes */
2147                                 if (use_dma_ppb_du) {
2148                                         /* every desc. counts bytes */
2149                                         count = udc_get_ppbdu_rxbytes(req);
2150                                 } else {
2151                                         /* last desc. counts bytes */
2152                                         count = AMD_GETBITS(td->status,
2153                                                 UDC_DMA_OUT_STS_RXBYTES);
2154                                         if (!count && req->req.length
2155                                                 == UDC_DMA_MAXPACKET) {
2156                                                 /*
2157                                                  * on 64k packets the RXBYTES
2158                                                  * field is zero
2159                                                  */
2160                                                 count = UDC_DMA_MAXPACKET;
2161                                         }
2162                                 }
2163                                 VDBG(dev, "last desc rx bytes=%u\n", count);
2164                         }
2165
2166                         tmp = req->req.length - req->req.actual;
2167                         if (count > tmp) {
2168                                 if ((tmp % ep->ep.maxpacket) != 0) {
2169                                         DBG(dev, "%s: rx %db, space=%db\n",
2170                                                 ep->ep.name, count, tmp);
2171                                         req->req.status = -EOVERFLOW;
2172                                 }
2173                                 count = tmp;
2174                         }
2175                         req->req.actual += count;
2176                         req->dma_going = 0;
2177                         /* complete request */
2178                         complete_req(ep, req, 0);
2179
2180                         /* next request */
2181                         if (!list_empty(&ep->queue) && !ep->halted) {
2182                                 req = list_entry(ep->queue.next,
2183                                         struct udc_request,
2184                                         queue);
2185                                 /*
2186                                  * DMA may be already started by udc_queue()
2187                                  * called by gadget drivers completion
2188                                  * routine. This happens when queue
2189                                  * holds one request only.
2190                                  */
2191                                 if (req->dma_going == 0) {
2192                                         /* next dma */
2193                                         if (prep_dma(ep, req, GFP_ATOMIC) != 0)
2194                                                 goto finished;
2195                                         /* write desc pointer */
2196                                         writel(req->td_phys,
2197                                                 &ep->regs->desptr);
2198                                         req->dma_going = 1;
2199                                         /* enable DMA */
2200                                         udc_set_rde(dev);
2201                                 }
2202                         } else {
2203                                 /*
2204                                  * implant BNA dummy descriptor to allow
2205                                  * RXFIFO opening by RDE
2206                                  */
2207                                 if (ep->bna_dummy_req) {
2208                                         /* write desc pointer */
2209                                         writel(ep->bna_dummy_req->td_phys,
2210                                                 &ep->regs->desptr);
2211                                         ep->bna_occurred = 0;
2212                                 }
2213
2214                                 /*
2215                                  * schedule timer for setting RDE if queue
2216                                  * remains empty to allow ep0 packets pass
2217                                  * through
2218                                  */
2219                                 if (set_rde != 0
2220                                                 && !timer_pending(&udc_timer)) {
2221                                         udc_timer.expires =
2222                                                 jiffies
2223                                                 + HZ*UDC_RDE_TIMER_SECONDS;
2224                                         set_rde = 1;
2225                                         if (!stop_timer)
2226                                                 add_timer(&udc_timer);
2227                                 }
2228                                 if (ep->num != UDC_EP0OUT_IX)
2229                                         dev->data_ep_queued = 0;
2230                         }
2231
2232                 } else {
2233                         /*
2234                         * RX DMA must be reenabled for each desc in PPBDU mode
2235                         * and must be enabled for PPBNDU mode in case of BNA
2236                         */
2237                         udc_set_rde(dev);
2238                 }
2239
2240         } else if (ep->cancel_transfer) {
2241                 ret_val = IRQ_HANDLED;
2242                 ep->cancel_transfer = 0;
2243         }
2244
2245         /* check pending CNAKS */
2246         if (cnak_pending) {
2247                 /* CNAk processing when rxfifo empty only */
2248                 if (readl(&dev->regs->sts) & AMD_BIT(UDC_DEVSTS_RXFIFO_EMPTY))
2249                         udc_process_cnak_queue(dev);
2250         }
2251
2252         /* clear OUT bits in ep status */
2253         writel(UDC_EPSTS_OUT_CLEAR, &ep->regs->sts);
2254 finished:
2255         return ret_val;
2256 }
2257
2258 /* Interrupt handler for data IN traffic */
2259 static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
2260 {
2261         irqreturn_t ret_val = IRQ_NONE;
2262         u32 tmp;
2263         u32 epsts;
2264         struct udc_ep *ep;
2265         struct udc_request *req;
2266         struct udc_data_dma *td;
2267         unsigned dma_done;
2268         unsigned len;
2269
2270         ep = &dev->ep[ep_ix];
2271
2272         epsts = readl(&ep->regs->sts);
2273         if (use_dma) {
2274                 /* BNA ? */
2275                 if (epsts & AMD_BIT(UDC_EPSTS_BNA)) {
2276                         dev_err(&dev->pdev->dev,
2277                                 "BNA ep%din occurred - DESPTR = %08lx\n",
2278                                 ep->num,
2279                                 (unsigned long) readl(&ep->regs->desptr));
2280
2281                         /* clear BNA */
2282                         writel(epsts, &ep->regs->sts);
2283                         ret_val = IRQ_HANDLED;
2284                         goto finished;
2285                 }
2286         }
2287         /* HE event ? */
2288         if (epsts & AMD_BIT(UDC_EPSTS_HE)) {
2289                 dev_err(&dev->pdev->dev,
2290                         "HE ep%dn occurred - DESPTR = %08lx\n",
2291                         ep->num, (unsigned long) readl(&ep->regs->desptr));
2292
2293                 /* clear HE */
2294                 writel(epsts | AMD_BIT(UDC_EPSTS_HE), &ep->regs->sts);
2295                 ret_val = IRQ_HANDLED;
2296                 goto finished;
2297         }
2298
2299         /* DMA completion */
2300         if (epsts & AMD_BIT(UDC_EPSTS_TDC)) {
2301                 VDBG(dev, "TDC set- completion\n");
2302                 ret_val = IRQ_HANDLED;
2303                 if (!ep->cancel_transfer && !list_empty(&ep->queue)) {
2304                         req = list_entry(ep->queue.next,
2305                                         struct udc_request, queue);
2306                         /*
2307                          * length bytes transferred
2308                          * check dma done of last desc. in PPBDU mode
2309                          */
2310                         if (use_dma_ppb_du) {
2311                                 td = udc_get_last_dma_desc(req);
2312                                 if (td) {
2313                                         dma_done =
2314                                                 AMD_GETBITS(td->status,
2315                                                 UDC_DMA_IN_STS_BS);
2316                                         /* don't care DMA done */
2317                                         req->req.actual = req->req.length;
2318                                 }
2319                         } else {
2320                                 /* assume all bytes transferred */
2321                                 req->req.actual = req->req.length;
2322                         }
2323
2324                         if (req->req.actual == req->req.length) {
2325                                 /* complete req */
2326                                 complete_req(ep, req, 0);
2327                                 req->dma_going = 0;
2328                                 /* further request available ? */
2329                                 if (list_empty(&ep->queue)) {
2330                                         /* disable interrupt */
2331                                         tmp = readl(&dev->regs->ep_irqmsk);
2332                                         tmp |= AMD_BIT(ep->num);
2333                                         writel(tmp, &dev->regs->ep_irqmsk);
2334                                 }
2335                         }
2336                 }
2337                 ep->cancel_transfer = 0;
2338
2339         }
2340         /*
2341          * status reg has IN bit set and TDC not set (if TDC was handled,
2342          * IN must not be handled (UDC defect) ?
2343          */
2344         if ((epsts & AMD_BIT(UDC_EPSTS_IN))
2345                         && !(epsts & AMD_BIT(UDC_EPSTS_TDC))) {
2346                 ret_val = IRQ_HANDLED;
2347                 if (!list_empty(&ep->queue)) {
2348                         /* next request */
2349                         req = list_entry(ep->queue.next,
2350                                         struct udc_request, queue);
2351                         /* FIFO mode */
2352                         if (!use_dma) {
2353                                 /* write fifo */
2354                                 udc_txfifo_write(ep, &req->req);
2355                                 len = req->req.length - req->req.actual;
2356                                 if (len > ep->ep.maxpacket)
2357                                         len = ep->ep.maxpacket;
2358                                 req->req.actual += len;
2359                                 if (req->req.actual == req->req.length
2360                                         || (len != ep->ep.maxpacket)) {
2361                                         /* complete req */
2362                                         complete_req(ep, req, 0);
2363                                 }
2364                         /* DMA */
2365                         } else if (req && !req->dma_going) {
2366                                 VDBG(dev, "IN DMA : req=%p req->td_data=%p\n",
2367                                         req, req->td_data);
2368                                 if (req->td_data) {
2369
2370                                         req->dma_going = 1;
2371
2372                                         /*
2373                                          * unset L bit of first desc.
2374                                          * for chain
2375                                          */
2376                                         if (use_dma_ppb && req->req.length >
2377                                                         ep->ep.maxpacket) {
2378                                                 req->td_data->status &=
2379                                                         AMD_CLEAR_BIT(
2380                                                         UDC_DMA_IN_STS_L);
2381                                         }
2382
2383                                         /* write desc pointer */
2384                                         writel(req->td_phys, &ep->regs->desptr);
2385
2386                                         /* set HOST READY */
2387                                         req->td_data->status =
2388                                                 AMD_ADDBITS(
2389                                                 req->td_data->status,
2390                                                 UDC_DMA_IN_STS_BS_HOST_READY,
2391                                                 UDC_DMA_IN_STS_BS);
2392
2393                                         /* set poll demand bit */
2394                                         tmp = readl(&ep->regs->ctl);
2395                                         tmp |= AMD_BIT(UDC_EPCTL_P);
2396                                         writel(tmp, &ep->regs->ctl);
2397                                 }
2398                         }
2399
2400                 } else if (!use_dma && ep->in) {
2401                         /* disable interrupt */
2402                         tmp = readl(
2403                                 &dev->regs->ep_irqmsk);
2404                         tmp |= AMD_BIT(ep->num);
2405                         writel(tmp,
2406                                 &dev->regs->ep_irqmsk);
2407                 }
2408         }
2409         /* clear status bits */
2410         writel(epsts, &ep->regs->sts);
2411
2412 finished:
2413         return ret_val;
2414
2415 }
2416
2417 /* Interrupt handler for Control OUT traffic */
2418 static irqreturn_t udc_control_out_isr(struct udc *dev)
2419 __releases(dev->lock)
2420 __acquires(dev->lock)
2421 {
2422         irqreturn_t ret_val = IRQ_NONE;
2423         u32 tmp;
2424         int setup_supported;
2425         u32 count;
2426         int set = 0;
2427         struct udc_ep   *ep;
2428         struct udc_ep   *ep_tmp;
2429
2430         ep = &dev->ep[UDC_EP0OUT_IX];
2431
2432         /* clear irq */
2433         writel(AMD_BIT(UDC_EPINT_OUT_EP0), &dev->regs->ep_irqsts);
2434
2435         tmp = readl(&dev->ep[UDC_EP0OUT_IX].regs->sts);
2436         /* check BNA and clear if set */
2437         if (tmp & AMD_BIT(UDC_EPSTS_BNA)) {
2438                 VDBG(dev, "ep0: BNA set\n");
2439                 writel(AMD_BIT(UDC_EPSTS_BNA),
2440                         &dev->ep[UDC_EP0OUT_IX].regs->sts);
2441                 ep->bna_occurred = 1;
2442                 ret_val = IRQ_HANDLED;
2443                 goto finished;
2444         }
2445
2446         /* type of data: SETUP or DATA 0 bytes */
2447         tmp = AMD_GETBITS(tmp, UDC_EPSTS_OUT);
2448         VDBG(dev, "data_typ = %x\n", tmp);
2449
2450         /* setup data */
2451         if (tmp == UDC_EPSTS_OUT_SETUP) {
2452                 ret_val = IRQ_HANDLED;
2453
2454                 ep->dev->stall_ep0in = 0;
2455                 dev->waiting_zlp_ack_ep0in = 0;
2456
2457                 /* set NAK for EP0_IN */
2458                 tmp = readl(&dev->ep[UDC_EP0IN_IX].regs->ctl);
2459                 tmp |= AMD_BIT(UDC_EPCTL_SNAK);
2460                 writel(tmp, &dev->ep[UDC_EP0IN_IX].regs->ctl);
2461                 dev->ep[UDC_EP0IN_IX].naking = 1;
2462                 /* get setup data */
2463                 if (use_dma) {
2464
2465                         /* clear OUT bits in ep status */
2466                         writel(UDC_EPSTS_OUT_CLEAR,
2467                                 &dev->ep[UDC_EP0OUT_IX].regs->sts);
2468
2469                         setup_data.data[0] =
2470                                 dev->ep[UDC_EP0OUT_IX].td_stp->data12;
2471                         setup_data.data[1] =
2472                                 dev->ep[UDC_EP0OUT_IX].td_stp->data34;
2473                         /* set HOST READY */
2474                         dev->ep[UDC_EP0OUT_IX].td_stp->status =
2475                                         UDC_DMA_STP_STS_BS_HOST_READY;
2476                 } else {
2477                         /* read fifo */
2478                         udc_rxfifo_read_dwords(dev, setup_data.data, 2);
2479                 }
2480
2481                 /* determine direction of control data */
2482                 if ((setup_data.request.bRequestType & USB_DIR_IN) != 0) {
2483                         dev->gadget.ep0 = &dev->ep[UDC_EP0IN_IX].ep;
2484                         /* enable RDE */
2485                         udc_ep0_set_rde(dev);
2486                         set = 0;
2487                 } else {
2488                         dev->gadget.ep0 = &dev->ep[UDC_EP0OUT_IX].ep;
2489                         /*
2490                          * implant BNA dummy descriptor to allow RXFIFO opening
2491                          * by RDE
2492                          */
2493                         if (ep->bna_dummy_req) {
2494                                 /* write desc pointer */
2495                                 writel(ep->bna_dummy_req->td_phys,
2496                                         &dev->ep[UDC_EP0OUT_IX].regs->desptr);
2497                                 ep->bna_occurred = 0;
2498                         }
2499
2500                         set = 1;
2501                         dev->ep[UDC_EP0OUT_IX].naking = 1;
2502                         /*
2503                          * setup timer for enabling RDE (to not enable
2504                          * RXFIFO DMA for data to early)
2505                          */
2506                         set_rde = 1;
2507                         if (!timer_pending(&udc_timer)) {
2508                                 udc_timer.expires = jiffies +
2509                                                         HZ/UDC_RDE_TIMER_DIV;
2510                                 if (!stop_timer)
2511                                         add_timer(&udc_timer);
2512                         }
2513                 }
2514
2515                 /*
2516                  * mass storage reset must be processed here because
2517                  * next packet may be a CLEAR_FEATURE HALT which would not
2518                  * clear the stall bit when no STALL handshake was received
2519                  * before (autostall can cause this)
2520                  */
2521                 if (setup_data.data[0] == UDC_MSCRES_DWORD0
2522                                 && setup_data.data[1] == UDC_MSCRES_DWORD1) {
2523                         DBG(dev, "MSC Reset\n");
2524                         /*
2525                          * clear stall bits
2526                          * only one IN and OUT endpoints are handled
2527                          */
2528                         ep_tmp = &udc->ep[UDC_EPIN_IX];
2529                         udc_set_halt(&ep_tmp->ep, 0);
2530                         ep_tmp = &udc->ep[UDC_EPOUT_IX];
2531                         udc_set_halt(&ep_tmp->ep, 0);
2532                 }
2533
2534                 /* call gadget with setup data received */
2535                 spin_unlock(&dev->lock);
2536                 setup_supported = dev->driver->setup(&dev->gadget,
2537                                                 &setup_data.request);
2538                 spin_lock(&dev->lock);
2539
2540                 tmp = readl(&dev->ep[UDC_EP0IN_IX].regs->ctl);
2541                 /* ep0 in returns data (not zlp) on IN phase */
2542                 if (setup_supported >= 0 && setup_supported <
2543                                 UDC_EP0IN_MAXPACKET) {
2544                         /* clear NAK by writing CNAK in EP0_IN */
2545                         tmp |= AMD_BIT(UDC_EPCTL_CNAK);
2546                         writel(tmp, &dev->ep[UDC_EP0IN_IX].regs->ctl);
2547                         dev->ep[UDC_EP0IN_IX].naking = 0;
2548                         UDC_QUEUE_CNAK(&dev->ep[UDC_EP0IN_IX], UDC_EP0IN_IX);
2549
2550                 /* if unsupported request then stall */
2551                 } else if (setup_supported < 0) {
2552                         tmp |= AMD_BIT(UDC_EPCTL_S);
2553                         writel(tmp, &dev->ep[UDC_EP0IN_IX].regs->ctl);
2554                 } else
2555                         dev->waiting_zlp_ack_ep0in = 1;
2556
2557
2558                 /* clear NAK by writing CNAK in EP0_OUT */
2559                 if (!set) {
2560                         tmp = readl(&dev->ep[UDC_EP0OUT_IX].regs->ctl);
2561                         tmp |= AMD_BIT(UDC_EPCTL_CNAK);
2562                         writel(tmp, &dev->ep[UDC_EP0OUT_IX].regs->ctl);
2563                         dev->ep[UDC_EP0OUT_IX].naking = 0;
2564                         UDC_QUEUE_CNAK(&dev->ep[UDC_EP0OUT_IX], UDC_EP0OUT_IX);
2565                 }
2566
2567                 if (!use_dma) {
2568                         /* clear OUT bits in ep status */
2569                         writel(UDC_EPSTS_OUT_CLEAR,
2570                                 &dev->ep[UDC_EP0OUT_IX].regs->sts);
2571                 }
2572
2573         /* data packet 0 bytes */
2574         } else if (tmp == UDC_EPSTS_OUT_DATA) {
2575                 /* clear OUT bits in ep status */
2576                 writel(UDC_EPSTS_OUT_CLEAR, &dev->ep[UDC_EP0OUT_IX].regs->sts);
2577
2578                 /* get setup data: only 0 packet */
2579                 if (use_dma) {
2580                         /* no req if 0 packet, just reactivate */
2581                         if (list_empty(&dev->ep[UDC_EP0OUT_IX].queue)) {
2582                                 VDBG(dev, "ZLP\n");
2583
2584                                 /* set HOST READY */
2585                                 dev->ep[UDC_EP0OUT_IX].td->status =
2586                                         AMD_ADDBITS(
2587                                         dev->ep[UDC_EP0OUT_IX].td->status,
2588                                         UDC_DMA_OUT_STS_BS_HOST_READY,
2589                                         UDC_DMA_OUT_STS_BS);
2590                                 /* enable RDE */
2591                                 udc_ep0_set_rde(dev);
2592                                 ret_val = IRQ_HANDLED;
2593
2594                         } else {
2595                                 /* control write */
2596                                 ret_val |= udc_data_out_isr(dev, UDC_EP0OUT_IX);
2597                                 /* re-program desc. pointer for possible ZLPs */
2598                                 writel(dev->ep[UDC_EP0OUT_IX].td_phys,
2599                                         &dev->ep[UDC_EP0OUT_IX].regs->desptr);
2600                                 /* enable RDE */
2601                                 udc_ep0_set_rde(dev);
2602                         }
2603                 } else {
2604
2605                         /* received number bytes */
2606                         count = readl(&dev->ep[UDC_EP0OUT_IX].regs->sts);
2607                         count = AMD_GETBITS(count, UDC_EPSTS_RX_PKT_SIZE);
2608                         /* out data for fifo mode not working */
2609                         count = 0;
2610
2611                         /* 0 packet or real data ? */
2612                         if (count != 0) {
2613                                 ret_val |= udc_data_out_isr(dev, UDC_EP0OUT_IX);
2614                         } else {
2615                                 /* dummy read confirm */
2616                                 readl(&dev->ep[UDC_EP0OUT_IX].regs->confirm);
2617                                 ret_val = IRQ_HANDLED;
2618                         }
2619                 }
2620         }
2621
2622         /* check pending CNAKS */
2623         if (cnak_pending) {
2624                 /* CNAk processing when rxfifo empty only */
2625                 if (readl(&dev->regs->sts) & AMD_BIT(UDC_DEVSTS_RXFIFO_EMPTY))
2626                         udc_process_cnak_queue(dev);
2627         }
2628
2629 finished:
2630         return ret_val;
2631 }
2632
2633 /* Interrupt handler for Control IN traffic */
2634 static irqreturn_t udc_control_in_isr(struct udc *dev)
2635 {
2636         irqreturn_t ret_val = IRQ_NONE;
2637         u32 tmp;
2638         struct udc_ep *ep;
2639         struct udc_request *req;
2640         unsigned len;
2641
2642         ep = &dev->ep[UDC_EP0IN_IX];
2643
2644         /* clear irq */
2645         writel(AMD_BIT(UDC_EPINT_IN_EP0), &dev->regs->ep_irqsts);
2646
2647         tmp = readl(&dev->ep[UDC_EP0IN_IX].regs->sts);
2648         /* DMA completion */
2649         if (tmp & AMD_BIT(UDC_EPSTS_TDC)) {
2650                 VDBG(dev, "isr: TDC clear\n");
2651                 ret_val = IRQ_HANDLED;
2652
2653                 /* clear TDC bit */
2654                 writel(AMD_BIT(UDC_EPSTS_TDC),
2655                                 &dev->ep[UDC_EP0IN_IX].regs->sts);
2656
2657         /* status reg has IN bit set ? */
2658         } else if (tmp & AMD_BIT(UDC_EPSTS_IN)) {
2659                 ret_val = IRQ_HANDLED;
2660
2661                 if (ep->dma) {
2662                         /* clear IN bit */
2663                         writel(AMD_BIT(UDC_EPSTS_IN),
2664                                 &dev->ep[UDC_EP0IN_IX].regs->sts);
2665                 }
2666                 if (dev->stall_ep0in) {
2667                         DBG(dev, "stall ep0in\n");
2668                         /* halt ep0in */
2669                         tmp = readl(&ep->regs->ctl);
2670                         tmp |= AMD_BIT(UDC_EPCTL_S);
2671                         writel(tmp, &ep->regs->ctl);
2672                 } else {
2673                         if (!list_empty(&ep->queue)) {
2674                                 /* next request */
2675                                 req = list_entry(ep->queue.next,
2676                                                 struct udc_request, queue);
2677
2678                                 if (ep->dma) {
2679                                         /* write desc pointer */
2680                                         writel(req->td_phys, &ep->regs->desptr);
2681                                         /* set HOST READY */
2682                                         req->td_data->status =
2683                                                 AMD_ADDBITS(
2684                                                 req->td_data->status,
2685                                                 UDC_DMA_STP_STS_BS_HOST_READY,
2686                                                 UDC_DMA_STP_STS_BS);
2687
2688                                         /* set poll demand bit */
2689                                         tmp =
2690                                         readl(&dev->ep[UDC_EP0IN_IX].regs->ctl);
2691                                         tmp |= AMD_BIT(UDC_EPCTL_P);
2692                                         writel(tmp,
2693                                         &dev->ep[UDC_EP0IN_IX].regs->ctl);
2694
2695                                         /* all bytes will be transferred */
2696                                         req->req.actual = req->req.length;
2697
2698                                         /* complete req */
2699                                         complete_req(ep, req, 0);
2700
2701                                 } else {
2702                                         /* write fifo */
2703                                         udc_txfifo_write(ep, &req->req);
2704
2705                                         /* lengh bytes transferred */
2706                                         len = req->req.length - req->req.actual;
2707                                         if (len > ep->ep.maxpacket)
2708                                                 len = ep->ep.maxpacket;
2709
2710                                         req->req.actual += len;
2711                                         if (req->req.actual == req->req.length
2712                                                 || (len != ep->ep.maxpacket)) {
2713                                                 /* complete req */
2714                                                 complete_req(ep, req, 0);
2715                                         }
2716                                 }
2717
2718                         }
2719                 }
2720                 ep->halted = 0;
2721                 dev->stall_ep0in = 0;
2722                 if (!ep->dma) {
2723                         /* clear IN bit */
2724                         writel(AMD_BIT(UDC_EPSTS_IN),
2725                                 &dev->ep[UDC_EP0IN_IX].regs->sts);
2726                 }
2727         }
2728
2729         return ret_val;
2730 }
2731
2732
2733 /* Interrupt handler for global device events */
2734 static irqreturn_t udc_dev_isr(struct udc *dev, u32 dev_irq)
2735 __releases(dev->lock)
2736 __acquires(dev->lock)
2737 {
2738         irqreturn_t ret_val = IRQ_NONE;
2739         u32 tmp;
2740         u32 cfg;
2741         struct udc_ep *ep;
2742         u16 i;
2743         u8 udc_csr_epix;
2744
2745         /* SET_CONFIG irq ? */
2746         if (dev_irq & AMD_BIT(UDC_DEVINT_SC)) {
2747                 ret_val = IRQ_HANDLED;
2748
2749                 /* read config value */
2750                 tmp = readl(&dev->regs->sts);
2751                 cfg = AMD_GETBITS(tmp, UDC_DEVSTS_CFG);
2752                 DBG(dev, "SET_CONFIG interrupt: config=%d\n", cfg);
2753                 dev->cur_config = cfg;
2754                 dev->set_cfg_not_acked = 1;
2755
2756                 /* make usb request for gadget driver */
2757                 memset(&setup_data, 0 , sizeof(union udc_setup_data));
2758                 setup_data.request.bRequest = USB_REQ_SET_CONFIGURATION;
2759                 setup_data.request.wValue = cpu_to_le16(dev->cur_config);
2760
2761                 /* programm the NE registers */
2762                 for (i = 0; i < UDC_EP_NUM; i++) {
2763                         ep = &dev->ep[i];
2764                         if (ep->in) {
2765
2766                                 /* ep ix in UDC CSR register space */
2767                                 udc_csr_epix = ep->num;
2768
2769
2770                         /* OUT ep */
2771                         } else {
2772                                 /* ep ix in UDC CSR register space */
2773                                 udc_csr_epix = ep->num - UDC_CSR_EP_OUT_IX_OFS;
2774                         }
2775
2776                         tmp = readl(&dev->csr->ne[udc_csr_epix]);
2777                         /* ep cfg */
2778                         tmp = AMD_ADDBITS(tmp, ep->dev->cur_config,
2779                                                 UDC_CSR_NE_CFG);
2780                         /* write reg */
2781                         writel(tmp, &dev->csr->ne[udc_csr_epix]);
2782
2783                         /* clear stall bits */
2784                         ep->halted = 0;
2785                         tmp = readl(&ep->regs->ctl);
2786                         tmp = tmp & AMD_CLEAR_BIT(UDC_EPCTL_S);
2787                         writel(tmp, &ep->regs->ctl);
2788                 }
2789                 /* call gadget zero with setup data received */
2790                 spin_unlock(&dev->lock);
2791                 tmp = dev->driver->setup(&dev->gadget, &setup_data.request);
2792                 spin_lock(&dev->lock);
2793
2794         } /* SET_INTERFACE ? */
2795         if (dev_irq & AMD_BIT(UDC_DEVINT_SI)) {
2796                 ret_val = IRQ_HANDLED;
2797
2798                 dev->set_cfg_not_acked = 1;
2799                 /* read interface and alt setting values */
2800                 tmp = readl(&dev->regs->sts);
2801                 dev->cur_alt = AMD_GETBITS(tmp, UDC_DEVSTS_ALT);
2802                 dev->cur_intf = AMD_GETBITS(tmp, UDC_DEVSTS_INTF);
2803
2804                 /* make usb request for gadget driver */
2805                 memset(&setup_data, 0 , sizeof(union udc_setup_data));
2806                 setup_data.request.bRequest = USB_REQ_SET_INTERFACE;
2807                 setup_data.request.bRequestType = USB_RECIP_INTERFACE;
2808                 setup_data.request.wValue = cpu_to_le16(dev->cur_alt);
2809                 setup_data.request.wIndex = cpu_to_le16(dev->cur_intf);
2810
2811                 DBG(dev, "SET_INTERFACE interrupt: alt=%d intf=%d\n",
2812                                 dev->cur_alt, dev->cur_intf);
2813
2814                 /* programm the NE registers */
2815                 for (i = 0; i < UDC_EP_NUM; i++) {
2816                         ep = &dev->ep[i];
2817                         if (ep->in) {
2818
2819                                 /* ep ix in UDC CSR register space */
2820                                 udc_csr_epix = ep->num;
2821
2822
2823                         /* OUT ep */
2824                         } else {
2825                                 /* ep ix in UDC CSR register space */
2826                                 udc_csr_epix = ep->num - UDC_CSR_EP_OUT_IX_OFS;
2827                         }
2828
2829                         /* UDC CSR reg */
2830                         /* set ep values */
2831                         tmp = readl(&dev->csr->ne[udc_csr_epix]);
2832                         /* ep interface */
2833                         tmp = AMD_ADDBITS(tmp, ep->dev->cur_intf,
2834                                                 UDC_CSR_NE_INTF);
2835                         /* tmp = AMD_ADDBITS(tmp, 2, UDC_CSR_NE_INTF); */
2836                         /* ep alt */
2837                         tmp = AMD_ADDBITS(tmp, ep->dev->cur_alt,
2838                                                 UDC_CSR_NE_ALT);
2839                         /* write reg */
2840                         writel(tmp, &dev->csr->ne[udc_csr_epix]);
2841
2842                         /* clear stall bits */
2843                         ep->halted = 0;
2844                         tmp = readl(&ep->regs->ctl);
2845                         tmp = tmp & AMD_CLEAR_BIT(UDC_EPCTL_S);
2846                         writel(tmp, &ep->regs->ctl);
2847                 }
2848
2849                 /* call gadget zero with setup data received */
2850                 spin_unlock(&dev->lock);
2851                 tmp = dev->driver->setup(&dev->gadget, &setup_data.request);
2852                 spin_lock(&dev->lock);
2853
2854         } /* USB reset */
2855         if (dev_irq & AMD_BIT(UDC_DEVINT_UR)) {
2856                 DBG(dev, "USB Reset interrupt\n");
2857                 ret_val = IRQ_HANDLED;
2858
2859                 /* allow soft reset when suspend occurs */
2860                 soft_reset_occured = 0;
2861
2862                 dev->waiting_zlp_ack_ep0in = 0;
2863                 dev->set_cfg_not_acked = 0;
2864
2865                 /* mask not needed interrupts */
2866                 udc_mask_unused_interrupts(dev);
2867
2868                 /* call gadget to resume and reset configs etc. */
2869                 spin_unlock(&dev->lock);
2870                 if (dev->sys_suspended && dev->driver->resume) {
2871                         dev->driver->resume(&dev->gadget);
2872                         dev->sys_suspended = 0;
2873                 }
2874                 usb_gadget_udc_reset(&dev->gadget, dev->driver);
2875                 spin_lock(&dev->lock);
2876
2877                 /* disable ep0 to empty req queue */
2878                 empty_req_queue(&dev->ep[UDC_EP0IN_IX]);
2879                 ep_init(dev->regs, &dev->ep[UDC_EP0IN_IX]);
2880
2881                 /* soft reset when rxfifo not empty */
2882                 tmp = readl(&dev->regs->sts);
2883                 if (!(tmp & AMD_BIT(UDC_DEVSTS_RXFIFO_EMPTY))
2884                                 && !soft_reset_after_usbreset_occured) {
2885                         udc_soft_reset(dev);
2886                         soft_reset_after_usbreset_occured++;
2887                 }
2888
2889                 /*
2890                  * DMA reset to kill potential old DMA hw hang,
2891                  * POLL bit is already reset by ep_init() through
2892                  * disconnect()
2893                  */
2894                 DBG(dev, "DMA machine reset\n");
2895                 tmp = readl(&dev->regs->cfg);
2896                 writel(tmp | AMD_BIT(UDC_DEVCFG_DMARST), &dev->regs->cfg);
2897                 writel(tmp, &dev->regs->cfg);
2898
2899                 /* put into initial config */
2900                 udc_basic_init(dev);
2901
2902                 /* enable device setup interrupts */
2903                 udc_enable_dev_setup_interrupts(dev);
2904
2905                 /* enable suspend interrupt */
2906                 tmp = readl(&dev->regs->irqmsk);
2907                 tmp &= AMD_UNMASK_BIT(UDC_DEVINT_US);
2908                 writel(tmp, &dev->regs->irqmsk);
2909
2910         } /* USB suspend */
2911         if (dev_irq & AMD_BIT(UDC_DEVINT_US)) {
2912                 DBG(dev, "USB Suspend interrupt\n");
2913                 ret_val = IRQ_HANDLED;
2914                 if (dev->driver->suspend) {
2915                         spin_unlock(&dev->lock);
2916                         dev->sys_suspended = 1;
2917                         dev->driver->suspend(&dev->gadget);
2918                         spin_lock(&dev->lock);
2919                 }
2920         } /* new speed ? */
2921         if (dev_irq & AMD_BIT(UDC_DEVINT_ENUM)) {
2922                 DBG(dev, "ENUM interrupt\n");
2923                 ret_val = IRQ_HANDLED;
2924                 soft_reset_after_usbreset_occured = 0;
2925
2926                 /* disable ep0 to empty req queue */
2927                 empty_req_queue(&dev->ep[UDC_EP0IN_IX]);
2928                 ep_init(dev->regs, &dev->ep[UDC_EP0IN_IX]);
2929
2930                 /* link up all endpoints */
2931                 udc_setup_endpoints(dev);
2932                 dev_info(&dev->pdev->dev, "Connect: %s\n",
2933                          usb_speed_string(dev->gadget.speed));
2934
2935                 /* init ep 0 */
2936                 activate_control_endpoints(dev);
2937
2938                 /* enable ep0 interrupts */
2939                 udc_enable_ep0_interrupts(dev);
2940         }
2941         /* session valid change interrupt */
2942         if (dev_irq & AMD_BIT(UDC_DEVINT_SVC)) {
2943                 DBG(dev, "USB SVC interrupt\n");
2944                 ret_val = IRQ_HANDLED;
2945
2946                 /* check that session is not valid to detect disconnect */
2947                 tmp = readl(&dev->regs->sts);
2948                 if (!(tmp & AMD_BIT(UDC_DEVSTS_SESSVLD))) {
2949                         /* disable suspend interrupt */
2950                         tmp = readl(&dev->regs->irqmsk);
2951                         tmp |= AMD_BIT(UDC_DEVINT_US);
2952                         writel(tmp, &dev->regs->irqmsk);
2953                         DBG(dev, "USB Disconnect (session valid low)\n");
2954                         /* cleanup on disconnect */
2955                         usb_disconnect(udc);
2956                 }
2957
2958         }
2959
2960         return ret_val;
2961 }
2962
2963 /* Interrupt Service Routine, see Linux Kernel Doc for parameters */
2964 static irqreturn_t udc_irq(int irq, void *pdev)
2965 {
2966         struct udc *dev = pdev;
2967         u32 reg;
2968         u16 i;
2969         u32 ep_irq;
2970         irqreturn_t ret_val = IRQ_NONE;
2971
2972         spin_lock(&dev->lock);
2973
2974         /* check for ep irq */
2975         reg = readl(&dev->regs->ep_irqsts);
2976         if (reg) {
2977                 if (reg & AMD_BIT(UDC_EPINT_OUT_EP0))
2978                         ret_val |= udc_control_out_isr(dev);
2979                 if (reg & AMD_BIT(UDC_EPINT_IN_EP0))
2980                         ret_val |= udc_control_in_isr(dev);
2981
2982                 /*
2983                  * data endpoint
2984                  * iterate ep's
2985                  */
2986                 for (i = 1; i < UDC_EP_NUM; i++) {
2987                         ep_irq = 1 << i;
2988                         if (!(reg & ep_irq) || i == UDC_EPINT_OUT_EP0)
2989                                 continue;
2990
2991                         /* clear irq status */
2992                         writel(ep_irq, &dev->regs->ep_irqsts);
2993
2994                         /* irq for out ep ? */
2995                         if (i > UDC_EPIN_NUM)
2996                                 ret_val |= udc_data_out_isr(dev, i);
2997                         else
2998                                 ret_val |= udc_data_in_isr(dev, i);
2999                 }
3000
3001         }
3002
3003
3004         /* check for dev irq */
3005         reg = readl(&dev->regs->irqsts);
3006         if (reg) {
3007                 /* clear irq */
3008                 writel(reg, &dev->regs->irqsts);
3009                 ret_val |= udc_dev_isr(dev, reg);
3010         }
3011
3012
3013         spin_unlock(&dev->lock);
3014         return ret_val;
3015 }
3016
3017 /* Tears down device */
3018 static void gadget_release(struct device *pdev)
3019 {
3020         struct amd5536udc *dev = dev_get_drvdata(pdev);
3021         kfree(dev);
3022 }
3023
3024 /* Cleanup on device remove */
3025 static void udc_remove(struct udc *dev)
3026 {
3027         /* remove timer */
3028         stop_timer++;
3029         if (timer_pending(&udc_timer))
3030                 wait_for_completion(&on_exit);
3031         if (udc_timer.data)
3032                 del_timer_sync(&udc_timer);
3033         /* remove pollstall timer */
3034         stop_pollstall_timer++;
3035         if (timer_pending(&udc_pollstall_timer))
3036                 wait_for_completion(&on_pollstall_exit);
3037         if (udc_pollstall_timer.data)
3038                 del_timer_sync(&udc_pollstall_timer);
3039         udc = NULL;
3040 }
3041
3042 /* Reset all pci context */
3043 static void udc_pci_remove(struct pci_dev *pdev)
3044 {
3045         struct udc              *dev;
3046
3047         dev = pci_get_drvdata(pdev);
3048
3049         usb_del_gadget_udc(&udc->gadget);
3050         /* gadget driver must not be registered */
3051         BUG_ON(dev->driver != NULL);
3052
3053         /* dma pool cleanup */
3054         if (dev->data_requests)
3055                 pci_pool_destroy(dev->data_requests);
3056
3057         if (dev->stp_requests) {
3058                 /* cleanup DMA desc's for ep0in */
3059                 pci_pool_free(dev->stp_requests,
3060                         dev->ep[UDC_EP0OUT_IX].td_stp,
3061                         dev->ep[UDC_EP0OUT_IX].td_stp_dma);
3062                 pci_pool_free(dev->stp_requests,
3063                         dev->ep[UDC_EP0OUT_IX].td,
3064                         dev->ep[UDC_EP0OUT_IX].td_phys);
3065
3066                 pci_pool_destroy(dev->stp_requests);
3067         }
3068
3069         /* reset controller */
3070         writel(AMD_BIT(UDC_DEVCFG_SOFTRESET), &dev->regs->cfg);
3071         if (dev->irq_registered)
3072                 free_irq(pdev->irq, dev);
3073         if (dev->regs)
3074                 iounmap(dev->regs);
3075         if (dev->mem_region)
3076                 release_mem_region(pci_resource_start(pdev, 0),
3077                                 pci_resource_len(pdev, 0));
3078         if (dev->active)
3079                 pci_disable_device(pdev);
3080
3081         udc_remove(dev);
3082 }
3083
3084 /* create dma pools on init */
3085 static int init_dma_pools(struct udc *dev)
3086 {
3087         struct udc_stp_dma      *td_stp;
3088         struct udc_data_dma     *td_data;
3089         int retval;
3090
3091         /* consistent DMA mode setting ? */
3092         if (use_dma_ppb) {
3093                 use_dma_bufferfill_mode = 0;
3094         } else {
3095                 use_dma_ppb_du = 0;
3096                 use_dma_bufferfill_mode = 1;
3097         }
3098
3099         /* DMA setup */
3100         dev->data_requests = dma_pool_create("data_requests", NULL,
3101                 sizeof(struct udc_data_dma), 0, 0);
3102         if (!dev->data_requests) {
3103                 DBG(dev, "can't get request data pool\n");
3104                 retval = -ENOMEM;
3105                 goto finished;
3106         }
3107
3108         /* EP0 in dma regs = dev control regs */
3109         dev->ep[UDC_EP0IN_IX].dma = &dev->regs->ctl;
3110
3111         /* dma desc for setup data */
3112         dev->stp_requests = dma_pool_create("setup requests", NULL,
3113                 sizeof(struct udc_stp_dma), 0, 0);
3114         if (!dev->stp_requests) {
3115                 DBG(dev, "can't get stp request pool\n");
3116                 retval = -ENOMEM;
3117                 goto finished;
3118         }
3119         /* setup */
3120         td_stp = dma_pool_alloc(dev->stp_requests, GFP_KERNEL,
3121                                 &dev->ep[UDC_EP0OUT_IX].td_stp_dma);
3122         if (td_stp == NULL) {
3123                 retval = -ENOMEM;
3124                 goto finished;
3125         }
3126         dev->ep[UDC_EP0OUT_IX].td_stp = td_stp;
3127
3128         /* data: 0 packets !? */
3129         td_data = dma_pool_alloc(dev->stp_requests, GFP_KERNEL,
3130                                 &dev->ep[UDC_EP0OUT_IX].td_phys);
3131         if (td_data == NULL) {
3132                 retval = -ENOMEM;
3133                 goto finished;
3134         }
3135         dev->ep[UDC_EP0OUT_IX].td = td_data;
3136         return 0;
3137
3138 finished:
3139         return retval;
3140 }
3141
3142 /* Called by pci bus driver to init pci context */
3143 static int udc_pci_probe(
3144         struct pci_dev *pdev,
3145         const struct pci_device_id *id
3146 )
3147 {
3148         struct udc              *dev;
3149         unsigned long           resource;
3150         unsigned long           len;
3151         int                     retval = 0;
3152
3153         /* one udc only */
3154         if (udc) {
3155                 dev_dbg(&pdev->dev, "already probed\n");
3156                 return -EBUSY;
3157         }
3158
3159         /* init */
3160         dev = kzalloc(sizeof(struct udc), GFP_KERNEL);
3161         if (!dev) {
3162                 retval = -ENOMEM;
3163                 goto finished;
3164         }
3165
3166         /* pci setup */
3167         if (pci_enable_device(pdev) < 0) {
3168                 kfree(dev);
3169                 dev = NULL;
3170                 retval = -ENODEV;
3171                 goto finished;
3172         }
3173         dev->active = 1;
3174
3175         /* PCI resource allocation */
3176         resource = pci_resource_start(pdev, 0);
3177         len = pci_resource_len(pdev, 0);
3178
3179         if (!request_mem_region(resource, len, name)) {
3180                 dev_dbg(&pdev->dev, "pci device used already\n");
3181                 kfree(dev);
3182                 dev = NULL;
3183                 retval = -EBUSY;
3184                 goto finished;
3185         }
3186         dev->mem_region = 1;
3187
3188         dev->virt_addr = ioremap_nocache(resource, len);
3189         if (dev->virt_addr == NULL) {
3190                 dev_dbg(&pdev->dev, "start address cannot be mapped\n");
3191                 kfree(dev);
3192                 dev = NULL;
3193                 retval = -EFAULT;
3194                 goto finished;
3195         }
3196
3197         if (!pdev->irq) {
3198                 dev_err(&pdev->dev, "irq not set\n");
3199                 kfree(dev);
3200                 dev = NULL;
3201                 retval = -ENODEV;
3202                 goto finished;
3203         }
3204
3205         spin_lock_init(&dev->lock);
3206         /* udc csr registers base */
3207         dev->csr = dev->virt_addr + UDC_CSR_ADDR;
3208         /* dev registers base */
3209         dev->regs = dev->virt_addr + UDC_DEVCFG_ADDR;
3210         /* ep registers base */
3211         dev->ep_regs = dev->virt_addr + UDC_EPREGS_ADDR;
3212         /* fifo's base */
3213         dev->rxfifo = (u32 __iomem *)(dev->virt_addr + UDC_RXFIFO_ADDR);
3214         dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR);
3215
3216         if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) {
3217                 dev_dbg(&pdev->dev, "request_irq(%d) fail\n", pdev->irq);
3218                 kfree(dev);
3219                 dev = NULL;
3220                 retval = -EBUSY;
3221                 goto finished;
3222         }
3223         dev->irq_registered = 1;
3224
3225         pci_set_drvdata(pdev, dev);
3226
3227         /* chip revision for Hs AMD5536 */
3228         dev->chiprev = pdev->revision;
3229
3230         pci_set_master(pdev);
3231         pci_try_set_mwi(pdev);
3232
3233         /* init dma pools */
3234         if (use_dma) {
3235                 retval = init_dma_pools(dev);
3236                 if (retval != 0)
3237                         goto finished;
3238         }
3239
3240         dev->phys_addr = resource;
3241         dev->irq = pdev->irq;
3242         dev->pdev = pdev;
3243
3244         /* general probing */
3245         if (udc_probe(dev) == 0)
3246                 return 0;
3247
3248 finished:
3249         if (dev)
3250                 udc_pci_remove(pdev);
3251         return retval;
3252 }
3253
3254 /* general probe */
3255 static int udc_probe(struct udc *dev)
3256 {
3257         char            tmp[128];
3258         u32             reg;
3259         int             retval;
3260
3261         /* mark timer as not initialized */
3262         udc_timer.data = 0;
3263         udc_pollstall_timer.data = 0;
3264
3265         /* device struct setup */
3266         dev->gadget.ops = &udc_ops;
3267
3268         dev_set_name(&dev->gadget.dev, "gadget");
3269         dev->gadget.name = name;
3270         dev->gadget.max_speed = USB_SPEED_HIGH;
3271
3272         /* init registers, interrupts, ... */
3273         startup_registers(dev);
3274
3275         dev_info(&dev->pdev->dev, "%s\n", mod_desc);
3276
3277         snprintf(tmp, sizeof tmp, "%d", dev->irq);
3278         dev_info(&dev->pdev->dev,
3279                 "irq %s, pci mem %08lx, chip rev %02x(Geode5536 %s)\n",
3280                 tmp, dev->phys_addr, dev->chiprev,
3281                 (dev->chiprev == UDC_HSA0_REV) ? "A0" : "B1");
3282         strcpy(tmp, UDC_DRIVER_VERSION_STRING);
3283         if (dev->chiprev == UDC_HSA0_REV) {
3284                 dev_err(&dev->pdev->dev, "chip revision is A0; too old\n");
3285                 retval = -ENODEV;
3286                 goto finished;
3287         }
3288         dev_info(&dev->pdev->dev,
3289                 "driver version: %s(for Geode5536 B1)\n", tmp);
3290         udc = dev;
3291
3292         retval = usb_add_gadget_udc_release(&udc->pdev->dev, &dev->gadget,
3293                         gadget_release);
3294         if (retval)
3295                 goto finished;
3296
3297         /* timer init */
3298         init_timer(&udc_timer);
3299         udc_timer.function = udc_timer_function;
3300         udc_timer.data = 1;
3301         /* timer pollstall init */
3302         init_timer(&udc_pollstall_timer);
3303         udc_pollstall_timer.function = udc_pollstall_timer_function;
3304         udc_pollstall_timer.data = 1;
3305
3306         /* set SD */
3307         reg = readl(&dev->regs->ctl);
3308         reg |= AMD_BIT(UDC_DEVCTL_SD);
3309         writel(reg, &dev->regs->ctl);
3310
3311         /* print dev register info */
3312         print_regs(dev);
3313
3314         return 0;
3315
3316 finished:
3317         return retval;
3318 }
3319
3320 /* Initiates a remote wakeup */
3321 static int udc_remote_wakeup(struct udc *dev)
3322 {
3323         unsigned long flags;
3324         u32 tmp;
3325
3326         DBG(dev, "UDC initiates remote wakeup\n");
3327
3328         spin_lock_irqsave(&dev->lock, flags);
3329
3330         tmp = readl(&dev->regs->ctl);
3331         tmp |= AMD_BIT(UDC_DEVCTL_RES);
3332         writel(tmp, &dev->regs->ctl);
3333         tmp &= AMD_CLEAR_BIT(UDC_DEVCTL_RES);
3334         writel(tmp, &dev->regs->ctl);
3335
3336         spin_unlock_irqrestore(&dev->lock, flags);
3337         return 0;
3338 }
3339
3340 /* PCI device parameters */
3341 static const struct pci_device_id pci_id[] = {
3342         {
3343                 PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x2096),
3344                 .class =        (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
3345                 .class_mask =   0xffffffff,
3346         },
3347         {},
3348 };
3349 MODULE_DEVICE_TABLE(pci, pci_id);
3350
3351 /* PCI functions */
3352 static struct pci_driver udc_pci_driver = {
3353         .name =         (char *) name,
3354         .id_table =     pci_id,
3355         .probe =        udc_pci_probe,
3356         .remove =       udc_pci_remove,
3357 };
3358
3359 module_pci_driver(udc_pci_driver);
3360
3361 MODULE_DESCRIPTION(UDC_MOD_DESCRIPTION);
3362 MODULE_AUTHOR("Thomas Dahlmann");
3363 MODULE_LICENSE("GPL");
3364