drivers/usb/gadget/udc/net2280.h

   1 /*
   2  * NetChip 2280 high/full speed USB device controller.
   3  * Unlike many such controllers, this one talks PCI.
   4  */
   5
   6 /*
   7  * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com)
   8  * Copyright (C) 2003 David Brownell
   9  * Copyright (C) 2014 Ricardo Ribalda - Qtechnology/AS
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License as published by
  13  * the Free Software Foundation; either version 2 of the License, or
  14  * (at your option) any later version.
  15  */
  16
  17 #include <linux/usb/net2280.h>
  18 #include <linux/usb/usb338x.h>
  19
  20 /*-------------------------------------------------------------------------*/
  21
  22 #ifdef  __KERNEL__
  23
  24 /* indexed registers [11.10] are accessed indirectly
  25  * caller must own the device lock.
  26  */
  27
  28 static inline u32 get_idx_reg(struct net2280_regs __iomem *regs, u32 index)
  29 {
  30         writel(index, &regs->idxaddr);
  31         /* NOTE:  synchs device/cpu memory views */
  32         return readl(&regs->idxdata);
  33 }
  34
  35 static inline void
  36 set_idx_reg(struct net2280_regs __iomem *regs, u32 index, u32 value)
  37 {
  38         writel(index, &regs->idxaddr);
  39         writel(value, &regs->idxdata);
  40         /* posted, may not be visible yet */
  41 }
  42
  43 #endif  /* __KERNEL__ */
  44
  45 #define PCI_VENDOR_ID_PLX_LEGACY 0x17cc
  46
  47 #define PLX_LEGACY              BIT(0)
  48 #define PLX_2280                BIT(1)
  49 #define PLX_SUPERSPEED          BIT(2)
  50
  51 #define REG_DIAG                0x0
  52 #define     RETRY_COUNTER                                       16
  53 #define     FORCE_PCI_SERR                                      11
  54 #define     FORCE_PCI_INTERRUPT                                 10
  55 #define     FORCE_USB_INTERRUPT                                 9
  56 #define     FORCE_CPU_INTERRUPT                                 8
  57 #define     ILLEGAL_BYTE_ENABLES                                5
  58 #define     FAST_TIMES                                          4
  59 #define     FORCE_RECEIVE_ERROR                                 2
  60 #define     FORCE_TRANSMIT_CRC_ERROR                            0
  61 #define REG_FRAME               0x02    /* from last sof */
  62 #define REG_CHIPREV             0x03    /* in bcd */
  63 #define REG_HS_NAK_RATE         0x0a    /* NAK per N uframes */
  64
  65 #define CHIPREV_1       0x0100
  66 #define CHIPREV_1A      0x0110
  67
  68 /* DEFECT 7374 */
  69 #define DEFECT_7374_NUMBEROF_MAX_WAIT_LOOPS         200
  70 #define DEFECT_7374_PROCESSOR_WAIT_TIME             10
  71
  72 /* ep0 max packet size */
  73 #define EP0_SS_MAX_PACKET_SIZE  0x200
  74 #define EP0_HS_MAX_PACKET_SIZE  0x40
  75 #ifdef  __KERNEL__
  76
  77 /*-------------------------------------------------------------------------*/
  78
  79 /* [8.3] for scatter/gather i/o
  80  * use struct net2280_dma_regs bitfields
  81  */
  82 struct net2280_dma {
  83         __le32          dmacount;
  84         __le32          dmaaddr;                /* the buffer */
  85         __le32          dmadesc;                /* next dma descriptor */
  86         __le32          _reserved;
  87 } __aligned(16);
  88
  89 /*-------------------------------------------------------------------------*/
  90
  91 /* DRIVER DATA STRUCTURES and UTILITIES */
  92
  93 struct net2280_ep {
  94         struct usb_ep                           ep;
  95         struct net2280_ep_regs __iomem *cfg;
  96         struct net2280_ep_regs                  __iomem *regs;
  97         struct net2280_dma_regs                 __iomem *dma;
  98         struct net2280_dma                      *dummy;
  99         dma_addr_t                              td_dma; /* of dummy */
 100         struct net2280                          *dev;
 101         unsigned long                           irqs;
 102
 103         /* analogous to a host-side qh */
 104         struct list_head                        queue;
 105         const struct usb_endpoint_descriptor    *desc;
 106         unsigned                                num : 8,
 107                                                 fifo_size : 12,
 108                                                 in_fifo_validate : 1,
 109                                                 out_overflow : 1,
 110                                                 stopped : 1,
 111                                                 wedged : 1,
 112                                                 is_in : 1,
 113                                                 is_iso : 1,
 114                                                 responded : 1;
 115 };
 116
 117 static inline void allow_status(struct net2280_ep *ep)
 118 {
 119         /* ep0 only */
 120         writel(BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) |
 121                 BIT(CLEAR_NAK_OUT_PACKETS) |
 122                 BIT(CLEAR_NAK_OUT_PACKETS_MODE),
 123                 &ep->regs->ep_rsp);
 124         ep->stopped = 1;
 125 }
 126
 127 static inline void allow_status_338x(struct net2280_ep *ep)
 128 {
 129         /*
 130          * Control Status Phase Handshake was set by the chip when the setup
 131          * packet arrived. While set, the chip automatically NAKs the host's
 132          * Status Phase tokens.
 133          */
 134         writel(BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE), &ep->regs->ep_rsp);
 135
 136         ep->stopped = 1;
 137
 138         /* TD 9.9 Halt Endpoint test.  TD 9.22 set feature test. */
 139         ep->responded = 0;
 140 }
 141
 142 struct net2280_request {
 143         struct usb_request              req;
 144         struct net2280_dma              *td;
 145         dma_addr_t                      td_dma;
 146         struct list_head                queue;
 147         unsigned                        mapped : 1,
 148                                         valid : 1;
 149 };
 150
 151 struct net2280 {
 152         /* each pci device provides one gadget, several endpoints */
 153         struct usb_gadget               gadget;
 154         spinlock_t                      lock;
 155         struct net2280_ep               ep[9];
 156         struct usb_gadget_driver        *driver;
 157         unsigned                        enabled : 1,
 158                                         protocol_stall : 1,
 159                                         softconnect : 1,
 160                                         got_irq : 1,
 161                                         region:1,
 162                                         u1_enable:1,
 163                                         u2_enable:1,
 164                                         ltm_enable:1,
 165                                         wakeup_enable:1,
 166                                         addressed_state:1,
 167                                         bug7734_patched:1;
 168         u16                             chiprev;
 169         int enhanced_mode;
 170         int n_ep;
 171         kernel_ulong_t                  quirks;
 172
 173
 174         /* pci state used to access those endpoints */
 175         struct pci_dev                  *pdev;
 176         struct net2280_regs             __iomem *regs;
 177         struct net2280_usb_regs         __iomem *usb;
 178         struct usb338x_usb_ext_regs     __iomem *usb_ext;
 179         struct net2280_pci_regs         __iomem *pci;
 180         struct net2280_dma_regs         __iomem *dma;
 181         struct net2280_dep_regs         __iomem *dep;
 182         struct net2280_ep_regs          __iomem *epregs;
 183         struct usb338x_ll_regs          __iomem *llregs;
 184         struct usb338x_ll_lfps_regs     __iomem *ll_lfps_regs;
 185         struct usb338x_ll_tsn_regs      __iomem *ll_tsn_regs;
 186         struct usb338x_ll_chi_regs      __iomem *ll_chicken_reg;
 187         struct usb338x_pl_regs          __iomem *plregs;
 188
 189         struct pci_pool                 *requests;
 190         /* statistics...*/
 191 };
 192
 193 static inline void set_halt(struct net2280_ep *ep)
 194 {
 195         /* ep0 and bulk/intr endpoints */
 196         writel(BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) |
 197                 /* set NAK_OUT for erratum 0114 */
 198                 ((ep->dev->chiprev == CHIPREV_1) << SET_NAK_OUT_PACKETS) |
 199                 BIT(SET_ENDPOINT_HALT),
 200                 &ep->regs->ep_rsp);
 201 }
 202
 203 static inline void clear_halt(struct net2280_ep *ep)
 204 {
 205         /* ep0 and bulk/intr endpoints */
 206         writel(BIT(CLEAR_ENDPOINT_HALT) |
 207                 BIT(CLEAR_ENDPOINT_TOGGLE) |
 208                     /*
 209                      * unless the gadget driver left a short packet in the
 210                      * fifo, this reverses the erratum 0114 workaround.
 211                      */
 212                 ((ep->dev->chiprev == CHIPREV_1) << CLEAR_NAK_OUT_PACKETS),
 213                 &ep->regs->ep_rsp);
 214 }
 215
 216 /*
 217  * FSM value for Defect 7374 (U1U2 Test) is managed in
 218  * chip's SCRATCH register:
 219  */
 220 #define DEFECT7374_FSM_FIELD    28
 221
 222 /* Waiting for Control Read:
 223  *  - A transition to this state indicates a fresh USB connection,
 224  *    before the first Setup Packet. The connection speed is not
 225  *    known. Firmware is waiting for the first Control Read.
 226  *  - Starting state: This state can be thought of as the FSM's typical
 227  *    starting state.
 228  *  - Tip: Upon the first SS Control Read the FSM never
 229  *    returns to this state.
 230  */
 231 #define DEFECT7374_FSM_WAITING_FOR_CONTROL_READ BIT(DEFECT7374_FSM_FIELD)
 232
 233 /* Non-SS Control Read:
 234  *  - A transition to this state indicates detection of the first HS
 235  *    or FS Control Read.
 236  *  - Tip: Upon the first SS Control Read the FSM never
 237  *    returns to this state.
 238  */
 239 #define DEFECT7374_FSM_NON_SS_CONTROL_READ (2 << DEFECT7374_FSM_FIELD)
 240
 241 /* SS Control Read:
 242  *  - A transition to this state indicates detection of the
 243  *    first SS Control Read.
 244  *  - This state indicates workaround completion. Workarounds no longer
 245  *    need to be applied (as long as the chip remains powered up).
 246  *  - Tip: Once in this state the FSM state does not change (until
 247  *    the chip's power is lost and restored).
 248  *  - This can be thought of as the final state of the FSM;
 249  *    the FSM 'locks-up' in this state until the chip loses power.
 250  */
 251 #define DEFECT7374_FSM_SS_CONTROL_READ (3 << DEFECT7374_FSM_FIELD)
 252
 253 #ifdef USE_RDK_LEDS
 254
 255 static inline void net2280_led_init(struct net2280 *dev)
 256 {
 257         /* LED3 (green) is on during USB activity. note erratum 0113. */
 258         writel(BIT(GPIO3_LED_SELECT) |
 259                 BIT(GPIO3_OUTPUT_ENABLE) |
 260                 BIT(GPIO2_OUTPUT_ENABLE) |
 261                 BIT(GPIO1_OUTPUT_ENABLE) |
 262                 BIT(GPIO0_OUTPUT_ENABLE),
 263                 &dev->regs->gpioctl);
 264 }
 265
 266 /* indicate speed with bi-color LED 0/1 */
 267 static inline
 268 void net2280_led_speed(struct net2280 *dev, enum usb_device_speed speed)
 269 {
 270         u32     val = readl(&dev->regs->gpioctl);
 271         switch (speed) {
 272         case USB_SPEED_SUPER:           /* green + red */
 273                 val |= BIT(GPIO0_DATA) | BIT(GPIO1_DATA);
 274                 break;
 275         case USB_SPEED_HIGH:            /* green */
 276                 val &= ~BIT(GPIO0_DATA);
 277                 val |= BIT(GPIO1_DATA);
 278                 break;
 279         case USB_SPEED_FULL:            /* red */
 280                 val &= ~BIT(GPIO1_DATA);
 281                 val |= BIT(GPIO0_DATA);
 282                 break;
 283         default:                        /* (off/black) */
 284                 val &= ~(BIT(GPIO1_DATA) | BIT(GPIO0_DATA));
 285                 break;
 286         }
 287         writel(val, &dev->regs->gpioctl);
 288 }
 289
 290 /* indicate power with LED 2 */
 291 static inline void net2280_led_active(struct net2280 *dev, int is_active)
 292 {
 293         u32     val = readl(&dev->regs->gpioctl);
 294
 295         /* FIXME this LED never seems to turn on.*/
 296         if (is_active)
 297                 val |= GPIO2_DATA;
 298         else
 299                 val &= ~GPIO2_DATA;
 300         writel(val, &dev->regs->gpioctl);
 301 }
 302
 303 static inline void net2280_led_shutdown(struct net2280 *dev)
 304 {
 305         /* turn off all four GPIO*_DATA bits */
 306         writel(readl(&dev->regs->gpioctl) & ~0x0f,
 307                         &dev->regs->gpioctl);
 308 }
 309
 310 #else
 311
 312 #define net2280_led_init(dev)           do { } while (0)
 313 #define net2280_led_speed(dev, speed)   do { } while (0)
 314 #define net2280_led_shutdown(dev)       do { } while (0)
 315
 316 #endif
 317
 318 /*-------------------------------------------------------------------------*/
 319
 320 #define ep_dbg(ndev, fmt, args...) \
 321         dev_dbg((&((ndev)->pdev->dev)), fmt, ##args)
 322
 323 #define ep_vdbg(ndev, fmt, args...) \
 324         dev_vdbg((&((ndev)->pdev->dev)), fmt, ##args)
 325
 326 #define ep_info(ndev, fmt, args...) \
 327         dev_info((&((ndev)->pdev->dev)), fmt, ##args)
 328
 329 #define ep_warn(ndev, fmt, args...) \
 330         dev_warn((&((ndev)->pdev->dev)), fmt, ##args)
 331
 332 #define ep_err(ndev, fmt, args...) \
 333         dev_err((&((ndev)->pdev->dev)), fmt, ##args)
 334
 335 /*-------------------------------------------------------------------------*/
 336
 337 static inline void set_fifo_bytecount(struct net2280_ep *ep, unsigned count)
 338 {
 339         if (ep->dev->pdev->vendor == 0x17cc)
 340                 writeb(count, 2 + (u8 __iomem *) &ep->regs->ep_cfg);
 341         else{
 342                 u32 tmp = readl(&ep->cfg->ep_cfg) &
 343                                         (~(0x07 << EP_FIFO_BYTE_COUNT));
 344                 writel(tmp | (count << EP_FIFO_BYTE_COUNT), &ep->cfg->ep_cfg);
 345         }
 346 }
 347
 348 static inline void start_out_naking(struct net2280_ep *ep)
 349 {
 350         /* NOTE:  hardware races lurk here, and PING protocol issues */
 351         writel(BIT(SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp);
 352         /* synch with device */
 353         readl(&ep->regs->ep_rsp);
 354 }
 355
 356 static inline void stop_out_naking(struct net2280_ep *ep)
 357 {
 358         u32     tmp;
 359
 360         tmp = readl(&ep->regs->ep_stat);
 361         if ((tmp & BIT(NAK_OUT_PACKETS)) != 0)
 362                 writel(BIT(CLEAR_NAK_OUT_PACKETS), &ep->regs->ep_rsp);
 363 }
 364
 365
 366 static inline void set_max_speed(struct net2280_ep *ep, u32 max)
 367 {
 368         u32 reg;
 369         static const u32 ep_enhanced[9] = { 0x10, 0x60, 0x30, 0x80,
 370                                           0x50, 0x20, 0x70, 0x40, 0x90 };
 371
 372         if (ep->dev->enhanced_mode)
 373                 reg = ep_enhanced[ep->num];
 374         else{
 375                 reg = (ep->num + 1) * 0x10;
 376                 if (ep->dev->gadget.speed != USB_SPEED_HIGH)
 377                         reg += 1;
 378         }
 379
 380         set_idx_reg(ep->dev->regs, reg, max);
 381 }
 382
 383 #endif  /* __KERNEL__ */